Control of Structural Coloration by Natural Sunlight Irradiation on a Melanin Precursor Polymer Inspired by Skin Tanning

Crack-Free Structural Color Materials Prepared without Disrupting the Particle Arrangement by Controlling the Internal Stress Relaxation and Interactions of the Melanin Particles

In fabricating structural color materials with assembled colloidal particles, there is a trade-off between the internal stresses acting on the particles and the interactions between the particles during solvent volatilization. It is crucial to fabricate crack-free materials that maintain the periodic arrangements of the particles by understanding the mechanism for crack initiation. Here, we focused on the composition and additives of melanin particle dispersions to obtain crack-free structural color materials without disturbing the particle arrangements. The use of a water/ethanol mixture as a dispersant effectively reduced the internal stresses of the particles during solvent evaporation. Furthermore, the addition of low-molecular-weight, low-volatility ionic liquids ensured that the arrangement and interactions of the particles were maintained after solvent volatilization. Optimization of the composition and additives of the dispersion made it possible to achieve crack-free melanin-based structural color materials while maintaining vivid, angular-dependent color tones.

Quantitative Optical and Structural Comparison of 3D and (2+1)D Colloidal Photonic Crystals

Colloidal crystals are excellent model systems to study self-assembly and structural coloration because their periodicities coincide with the wavelength range of visible light. Different assembly methods inherently introduce characteristic defects and irregularities, even with nearly monodisperse colloidal particles. Here, we investigate how these imperfections influence the structural coloration by comparing two techniques to obtain colloidal crystals. 3D colloidal crystals produced by convective assembly are well-ordered and periodically arranged but show microscopic cracks. (2+1)D colloidal crystals fabricated by stacking individual monolayers show a decreased hexagonal order and limited crystal registration between single monolayers in the z-direction. We investigate the optical properties of both systems by comparing identical numbers of layers using correlative microspectroscopy. These measurements show that the less ordered (2+1)D colloidal crystals exhibit higher reflected light intensities. Macroscopic reflection integrating all angles shows that the reflected light intensity levels out with an increasing number of layers, whereas incoherent scattering increases. Although both types of colloidal crystal show similar angle-dependent color shifts in specular reflection, the less-ordered structure of the (2+1)D colloidal crystal scatters light within a larger angular range under diffusive illumination. Our results suggest that structural coloration is surprisingly robust toward local defects and irregularities.

A Flexible and Robust Structural Color Film Obtained by Assembly of Surface-Modified Melanin Particles

In this study, core-shell-hairy-type melanin particles surface modified with a polydopamine shell layer and a polymer brush hairy layer were fabricated and assembled to readily obtain bright structural color films. The hot pressing of freeze-dried samples of melanin particles decorated with a hydrophilic, low glass transition temperature polymer brush results in films that exhibit an angle-dependent structural color due to a highly periodic microstructure, with increased regularity in the arrangement of the particle array due to the fluidity of the particles. Flexible, self-supporting, and easy-to-cut and process structural color films are obtained, and their flexibility and robustness are demonstrated using compression tests. This method of obtaining highly visible structural color films using melanin particles as a single component will have a significant impact on practical materials and applications.

Photo-Curable Lacquer Sap Resin Based on Urushiol-Mimicking, Tyrosine-Containing Additive

Oriental lacquer sap is attracting considerable attention as a renewable and eco-friendly natural resin with high durability, heat resistance, insulation, insect repellency, and antiseptic and antibacterial properties. However, to ensure excellent coating performance, it is necessary to improve the drying/curing process of lacquer sap with a time-consuming drying time at high humidity [relative humidity (RH), 70-90%] and ambient temperature (20-30 °C). Drawing on an understanding of the polymerization mechanism of urushiol, the main component of the lacquer sap consisted of a water-in-oil (W/O) emulsion, and this study presents an eco-friendly additive that mimics the structure-function of urushiol composed of a polar catechol head group and a nonpolar hydrocarbon tail. A photo-curable lacquer sap was thus developed by adding a tyrosine amino acid-based lipid agent (denoted as Y-ADDA), which allows faster and more effective drying/curing at lower humidity while maintaining the nature-derived properties of lacquer sap. Y-ADDA easily coassembles with urushiol in the W/O emulsion droplets, thereby significantly accelerating the formation of a polymer network along with urushiol during water evaporation leading to fast drying/curing under ultraviolet (UV) light irradiation at low humidity (∼50% RH). The UV-cured lacquer sap resins showed higher performance in terms of film processing and physicochemical properties compared with that of the lacquer containing only tyrosine amino acids without aliphatic tail conjugation, N-(9-fluorenylmethoxycarbonyl)-O-tert-butyl-l-tyrosine Fmoc-Tyr(tBu)-OH. Furthermore, the drying and curing times, film morphology, transmittance, hardness, and adhesion strength of the UV-cured lacquer were markedly superior compared to those of shellac, a general eco-friendly fast-drying primer. The study provides useful strategies and insights to promote the industrial application of lacquer sap resins by employing biocompatible nanoagents developed with an understanding of the curing mechanism of natural resins and from the viewpoint of green and sustainable chemistry perspective.

Effect of N-Methylation on Dopamine Surface Chemistry

Dopamine (DA) surface chemistry has received significant attention because of its applicability in a wide range of research fields and the ability to graft functional molecules onto numerous solid surfaces. Various DA derivatives have been newly synthesized to identify key factors affecting the coating efficiency and to advance the coating system development. The oxidation of catechol into quinone followed by internal cyclization via the nucleophilic attack of primary amine is crucial for DA-based surface coating. Thus, it is expected that the amine group's nucleophilicity control directly affects the coating efficiency. However, it has not been systematically investigated, and most studies have been conducted with the focus on the transformation of amines into amides, despite such approaches decreasing the coating efficiency; the nitrogen in amides is less nucleophilic than that in free amines. In this study, we investigated the effect of N-alkylation on dopamine surface chemistry. N,N-Dimethyldopamine (DMDA) was newly synthesized, and the coating efficiency was systematically compared with DA and N-methyldopamine (MDA). DA N-monomethylation improved the coating rate by increasing the nitrogen nucleophilicity, whereas N,N-dimethylation dramatically decreased the DA surface coating property. In addition, MDA remained capable of universal surface coating and secondary reactions using the surface catechols. This study provides opportunities for developing coating materials with advanced functions and an improved coating rate.

Photonic Cellulose Films with Vivid Structural Colors: Fabrication and Selectively Chemical Response

Recent advances in structural-color cellulose nanocrystal (CNC) materials have been made toward chemical sensing applications; however, such materials lack sufficient color chroma for naked-eye observation, and their selective recognition to given chemicals as well as the corresponding mechanism has rarely been reported. Here, a dopamine-infiltration and post-polymerization approach is proposed to construct vivid structural-color composite films. The chiral nematic structure of CNC enables the structural coloration, while the strong light absorption of the polymeric co-phase, polydopamine (PDA) enhances the color chroma and visibility. By controlling the PDA amount, the composite films can detect organic solvents quantitatively and selectively via visible color changes. From the viewpoint of the compatibility and similitude principle, notably, a critical solubility parameter distance (R₀) between PDA and "active" solvents is defined with a three-dimensional Hansen solubility sphere; this well constructs a rule for the sensing selectivity of the chemochromic composite films. The findings pave the foundation for the design of colorimetric sensors with specifically testing objects.