Dual Functional Nanocarrier for Cellular Imaging and Drug Delivery in Cancer Cells Based on π-Conjugated Core and Biodegradable Polymer Arms

Hydrogen-Bonding-Regulated Morphology Control and the Impact on the Antibacterial Activity of Cationic π-Amphiphiles

This manuscript describes the synthesis, self-assembly, and antibacterial properties of naphthalene-diimide (NDI)-derived cationic π-amphiphiles. Three such asymmetric NDI derivatives with a nonionic hydrophilic wedge and a guanidine group in the two opposite sides of the NDI chromophore were considered. They differ by a single functional group (hydrazide, amide, and ester for NDI-1, NDI-2, and NDI-3, respectively), located in the linker between the NDI and the hydrophilic wedge. For NDI-1, the H-bonding among the hydrazides regulated unilateral stacking and a preferential direction of curvature of the resulting supramolecular polymer, producing an unsymmetric polymersome with the guanidinium groups displayed at the outer surface. NDI-3, lacking any H-bonding group, exhibits π-stacking without any preferential orientation and generates spherical particles with a relatively poor display of the guanidium groups. In sharp contrast to NDI-1, NDI-2 exhibits an entangled one-dimensional (1D) fibrillar morphology, indicating the prominent role of the H-bonding motif of the amide group and flexibility of the linker. The antibacterial activity of these assemblies was probed against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). NDI-1 showed the most promising antibacterial activity with a minimum inhibitory concentration (MIC) of ∼7.8 μg/mL against S. aureus and moderate activity (MIC ∼ 125 μg/mL) against E. coli. In sharp contrast, NDI-3 did not show any significant activity against the bacteria, suggesting a strong impact of the H-bonding-regulated directional assembly. NDI-2, forming a fibrillar network, showed moderate activity against S. aureus and negligible activity against E. coli, highlighting a significant impact of the morphology. All of these three molecules were found to be compatible with mammalian cells from the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) and hemolysis assay. The mechanistic investigation by membrane polarization assay, live/dead fluorescence assay, and microscopy studies confirmed the membrane disruption mechanism of cell killing for the lead candidate NDI-1.

Maleimide functionalized polycaprolactone micelles for glutathione quenching and doxorubicin delivery

High glutathione production is known to be one of the defense mechanisms by which many cancer cells survive elevated oxidative stress. By explicitly targeting glutathione in these cancer cells and diminishing its levels, oxidative stress can be intensified, ultimately triggering apoptosis or programmed cell death. Herein, we developed a novel approach by creating maleimide-functionalized polycaprolactone polymers, specifically using 2,3-diiodomaleimide functionality to reduce the level of glutathione in cancer cells. Polycaprolactone was chosen to conjugate the 2,3-diiodomaleimide functionality due to its biodegradable and biocompatible properties. The amphiphilic block copolymer was synthesized using PEG as a macroinitiator to make corresponding polymeric micelles. The resulting 2,3-diiodomaleimide-conjugated polycaprolactone micelles effectively quenched glutathione, even at low concentrations (0.01 mg mL-1). Furthermore, we loaded these micelles with the anticancer drug doxorubicin (DOX), which exhibited pH-dependent drug release. We obtained a loading capacity (LC) of 3.5% for the micelles, one of the highest LC reported among functional PCL-based micelles. Moreover, the enhanced LC doesn't affect their release profile. Cytotoxicity experiments demonstrated that empty and DOX-loaded micelles inhibited cancer cell growth, with the DOX-loaded micelles displaying the highest cytotoxicity. The ability of the polymer to quench intracellular GSH was also confirmed. This approach of attaching maleimide to polycaprolactone polymers shows promise in depleting elevated glutathione levels in cancer cells, potentially improving cancer treatment efficacy.

Zwitterionic Strategy to Stabilize Self-Immolative Polymer Nanoarchitecture under Physiological pH for Drug Delivery In Vitro and In Vivo

The major bottleneck in using polymer nanovectors for biomedical application, particularly those based on self-immolative poly(amino ester) (PAE), lies in their uncontrolled autodegradation at physiological pH before they can reach the intended target. Here, an elegant triblock-copolymer strategy is designed to stabilize the unstable PAE chains via zwitterionic interactions under physiological pH (pH 7.4) and precisely program their enzyme-responsive biodegradation specifically within the intracellular compartments, ensuring targeted delivery of the cargoes. To achieve this goal, biodegradable polycaprolactone (PCL) platform is chosen, and structure-engineered several di- and triblock architectures to arrive the precise macromolecular geometry. The hydrophobic-PCL core and hydrophilic anionic-PCL block at the periphery shield PAEs against autodegradation, thereby ensuring stability under physiological pH in PBS, FBS, cell culture medium and bloodstream. The clinical anticancer drug doxorubicin and deep-tissue penetrable near-infrared IR-780 biomarker is encapsulated to study their biological actions by in vitro live cancer cells and in vivo bioimaging in live animals. These zwitterions are biocompatible, nonhemolytic, and real-time in vitro live-cell confocal studies have confirmed their internalization and enzymatic biodegradation in the endo-lysosomal compartments to deliver the payload. In vivo bioimaging establishes their prolonged blood circulation for over 72 h, and the biodistribution analysis reveals the accumulation of nanoparticles predominantly in the excretory organs.

Solvent-Dependent Emissions Properties of a Model Aurone Enable Use in Biological Applications

Fluorophores are powerful visualization tools and the development of novel small organic fluorophores are in great demand. Small organic fluorophores have been derived from the aurone skeleton, 2-benzylidenebenzofuran-3(2H)-one. In this study, we have utilized a model aurone derivative with a methoxy group at the 3' position and a hydroxyl group at the 4' position, termed vanillin aurone, to develop a foundational understanding of structural factors impacting aurone fluorescence properties. The fluorescent behaviors of the model aurone were characterized in solvent environments differing in relative polarity and dielectric constant. These data suggested that hydrogen bonding or electrostatic interactions between excited state aurone and solvent directly impact emissions properties such as peak emission wavelength, emission intensity, and Stokes shift. Time-dependent Density Functional Theory (TD-DFT) model calculations suggest that quenched aurone emissions observed in water are a consequence of stabilization of a twisted excited state conformation that disrupts conjugation. In contrast, the calculations indicate that low polarity solvents such as toluene or acetone stabilize a brightly fluorescent planar state. Based on this, additional experiments were performed to demonstrate use as a turn-on probe in an aqueous environment in response to conditions leading to planar excited state stabilization. Vanillin aurone was observed to bind to a model ATP binding protein, YME1L, leading to enhanced emissions intensities with a dissociation equilibrium constant equal to ~ 30 µM. Separately, the aurone was observed to be cell permeable with significant toxicity at doses exceeding 6.25 µM. Taken together, these results suggest that aurones may be broadly useful as turn-on probes in aqueous environments that promote either a change in relative solvent polarity or through direct stabilization of a planar excited state through macromolecular binding.

Recent Advances in Polycaprolactones for Anticancer Drug Delivery

Poly(ε-Caprolactone)s are biodegradable and biocompatible polyesters that have gained considerable attention for drug delivery applications due to their slow degradation and ease of functionalization. One of the significant advantages of polycaprolactone is its ability to attach various functionalities to its backbone, which is commonly accomplished through ring-opening polymerization (ROP) of functionalized caprolactone monomer. In this review, we aim to summarize some of the most recent advances in polycaprolactones and their potential application in drug delivery. We will discuss different types of polycaprolactone-based drug delivery systems and their behavior in response to different stimuli, their ability to target specific locations, morphology, as well as their drug loading and release capabilities.

Rhodamine B-Conjugated Fluorescent Block Copolymer Micelles for Efficient Chlorambucil Delivery and Intracellular Imaging

The clinical development of the anticancer drug chlorambucil (CHL) is limited by its low solubility in water, poor bioavailability, and off-target toxicity. Besides, another constraint for monitoring intracellular drug delivery is the non-fluorescent nature of CHL. Nanocarriers based on block copolymers of poly(ethylene glycol)/poly(ethylene oxide) (PEG/PEO) and poly(ε-caprolactone) (PCL) are an elegant choice for drug delivery applications due to their high biocompatibility and inherent biodegradability properties. Here, we have designed and prepared block copolymer micelles (BCM) containing CHL (BCM-CHL) from a block copolymer having fluorescent probe rhodamine B (RhB) end-groups to achieve efficient drug delivery and intracellular imaging. For this purpose, the previously reported tetraphenylethylene (TPE)-containing poly(ethylene oxide)-b-poly(ε-caprolactone) [TPE-(PEO-b-PCL)₂] triblock copolymer was conjugated with RhB by a feasible and effective post-polymerization modification method. In addition, the block copolymer was obtained by a facile and efficient synthetic strategy of one-pot block copolymerization. The amphiphilicity of the resulting block copolymer TPE-(PEO-b-PCL-RhB)₂ led to the spontaneous formation of micelles (BCM) in aqueous media and successful encapsulation of the hydrophobic anticancer drug CHL (CHL-BCM). Dynamic light scattering and transmission electron microscopy analyses of BCM and CHL-BCM revealed a favorable size (10-100 nm) for passive targeting of tumor tissues via the enhanced permeability and retention effect. The fluorescence emission spectrum (λ_ex 315 nm) of BCM demonstrated Förster resonance energy transfer between TPE aggregates (donor) and RhB (acceptor). On the other hand, CHL-BCM revealed TPE monomer emission, which may be attributed to the π-π stacking interaction between TPE and CHL molecules. The in vitro drug release profile showed that CHL-BCM exhibits drug release in a sustained manner over 48 h. A cytotoxicity study proved the biocompatibility of BCM, while CHL-BCM revealed significant toxicity to cervical (HeLa) cancer cells. The inherent fluorescence of RhB in the block copolymer offered an opportunity to directly monitor the cellular uptake of the micelles by confocal laser scanning microscopy imaging. These results demonstrate the potential of these block copolymers as drug nanocarriers and as bioimaging probes for theranostic applications.

Melt Polycondensation Strategy for Amide-Functionalized l-Aspartic Acid Amphiphilic Polyester Nano-assemblies and Enzyme-Responsive Drug Delivery in Cancer Cells

Aliphatic polyesters are intrinsically enzymatic-biodegradable, and there is ever-increasing demand for safe and smart next-generation biomaterials including drug delivery nano-vectors in cancer research. Using bioresource-based biodegradable polyesters is one of the elegant strategies to meet this requirement; here, we report an l-amino acid-based amide-functionalized polyester platform and explore their lysosomal enzymatic biodegradation aspects to administrate anticancer drugs in cancer cells. l-Aspartic acid was chosen and different amide-side chain-functionalized di-ester monomers were tailor-made having aromatic, aliphatic, and bio-source pendant units. Under solvent-free melt polycondensation methodology; these monomers underwent polymerization to yield high molecular weight polyesters with tunable thermal properties. PEGylated l-aspartic monomer was designed to make thermo-responsive amphiphilic polyesters. This amphiphilic polyester was self-assembled into a 140 ± 10 nm-sized spherical nanoparticle in aqueous medium, which exhibited lower critical solution temperature at 40-42 °C. The polyester nano-assemblies showed excellent encapsulation capabilities for anticancer drug doxorubicin (DOX), anti-inflammatory drug curcumin, biomarkers such as rose bengal (RB), and 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt. The amphiphilic polyester NP was found to be very stable under extracellular conditions and underwent degradation upon exposure to horse liver esterase enzyme in phosphate-buffered saline at 37 °C to release 90% of the loaded cargoes. Cytotoxicity studies in breast cancer MCF 7 and wild-type mouse embryonic fibroblasts cell lines revealed that the amphiphilic polyester was non-toxic to cell lines up to 100 μg/mL, while their drug-loaded polyester nanoparticles were able to inhibit the cancerous cell growth. Temperature-dependent cellular uptake studies further confirmed the energy-dependent endocytosis of polymer NPs across the cellular membranes. Confocal laser scanning microscopy assisted time-dependent cellular uptake analysis directly evident for the endocytosis of DOX loaded polymer NP and their internalization for biodegradation. In a nutshell, the present investigation opens up an avenue for the l-amino acid-based biodegradable polyesters from l-aspartic acids, and the proof of concept is demonstrated for drug delivery in the cancer cell line.

Theranostic FRET Gate to Visualize and Quantify Bacterial Membrane Breaching

Designing new antimicrobial-cum-probes to study real-time bacterial membrane breaching and concurrently developing inquisitorial image-based analytical tools is essential for the treatment of infectious diseases. An array of aggregation-induced emission (AIE) polymers (donor) consisting of neutral, anionic, and cationic charges were designed and employed as antimicrobial theranostic gatekeepers for the permeabilization of the peptidoglycan layer-adherable crystal violet (CV, acceptor). An AIE-active tetraphenylethylene (TPE)-tagged polycaprolactone biodegradable platform was chosen, and their self-assembled tiny amphiphilic nanoparticles were employed as a gatekeeper in the construction of bacterial membrane-reinforced fluorescent resonance energy transfer (FRET) probes. Electrostatic adhering of the cationic AIE polymer and subsequent gate opening aided fluorescent FRET probe activation on the membrane of Gram-negative bacteria, Escherichia coli. The selective photoexcitation energy transfer process in confocal microscopy experiments facilitated the building of a visualization-based FRET assay for the quantification of bactericidal activity. Nonantimicrobial AIE polymers (neutral and anionic) did not breach the bacterial membrane, resulting in no FRET signal. Detailed photophysical studies were done to establish the FRET probe mechanism, and a proof of concept was established.

Structural Engineering of Star Block Biodegradable Polymer Unimolecular Micelles for Drug Delivery in Cancer Cells

The present investigation reports the structural engineering of biodegradable star block polycaprolactone (PCL) to tailor-make aggregated micelles and unimolecular micelles to study their effect on drug delivery aspects in cancer cell lines. Fully PCL-based star block copolymers were designed by varying the arm numbers from two to eight while keeping the arm length constant throughout. Multifunctional initiators were exploited for stepwise solvent-free melt ring-opening polymerization of ε-caprolactone and γ-substituted caprolactone to construct star block copolymers having a PCL hydrophobic core and a carboxylic PCL hydrophilic shell, respectively. A higher arm number and a higher degree of branching in star polymers facilitated the formation of unimolecular micelles as opposed to the formation of conventional multimicellar aggregates in lower arm analogues. The dense core of the unimolecular micelles enabled them to load high amounts of the anticancer drug doxorubicin (DOX, ∼12-15%) compared to the aggregated micelles (∼3-4%). The star unimolecular micelle completely degraded leading to 90% release of the loaded drug upon treatment with the lysosomal esterase enzyme in vitro. The anticancer efficacies of these DOX-loaded unimolecular micelles were tested in a breast cancer cell line (MCF-7), and their IC₅₀ values were found to be much lower compared to those of aggregated micelles. Time-dependent cellular uptake studies by confocal microscopy revealed that unimolecular micelles were readily taken up by the cells, and enhancement of the drug concentration was observed at the intracellular level up to 36 h. The present work opens new synthetic strategies for building a next-generation biodegradable unimolecular micellar nanoplatform for drug delivery in cancer research.

Glycopolymer and Poly(β-amino ester)-Based Amphiphilic Block Copolymer as a Drug Carrier

Glycopolymers are synthetic macromolecules having pendant sugar moieties and widely utilized to target cancer cells. They are usually considered as a hydrophilic segment of amphiphilic block copolymers to fabricate micelles as drug carriers. A novel amphiphilic block copolymer, namely, poly(2-deoxy-2-methacrylamido-d-glucose-co-2-hydroxyethyl methacrylate)-b-poly(β-amino ester) [P(MAG-co-HEMA)-b-PBAE], with active cancer cell targeting potential and pH responsivity was prepared. Tetrazine end functional P(MAG-co-HEMA) and norbornene end functional PBAE blocks were separately synthesized through reversible addition fragmentation chain transfer polymerization and Michael addition-based poly-condensation, respectively, and followed by end-group transformation. Then, inverse electron demand Diels Alder reaction between the tetrazine and the norbornene groups was performed by simply mixing to obtain the amphiphilic block copolymer. After characterization of the block copolymer in terms of chemical structure, pH responsivity, and drug loading/releasing, pH-responsive micelles were obtained with or without doxorubicin (DOX), a model anticancer drug. The micelles exhibited a sharp protonated/deprotonated transition on tertiary amine groups around pH 6.75 and the pH-specific release of DOX below this value. Eventually, the drug delivery potential was evaluated by cytotoxicity assays on both the noncancerous human umbilical vein endothelial cell (HUVEC) cell line and glioblastoma cell line, U87-MG. While the DOX-loaded polymeric micelles were not toxic in noncancerous HUVEC cells, being toxic only to the cancer cells indicates that it is a potential specific cell targeting strategy in the treatment of cancer.

Bioengineering of virus-like particles as dynamic nanocarriers for in vivo delivery and targeting to solid tumours

Virus-like particles (VLPs) are known as self-assembled, non-replicative and non-infectious protein particles, which imitate the formation and structure of original wild type viruses, however, lack the viral genome and/or their fragments. The capacity of VLPs to encompass small molecules like nucleic acids and others has made them as novel vessels of nanocarriers for drug delivery applications. In addition, VLPs surface have the capacity to achieve variation of the surface display via several modification strategies including genetic modification, chemical modification, and non-covalent modification. Among the VLPs nanocarriers, Hepatitis B virus core (HBc) particles have been the most encouraging candidate. HBc particles are hollow nanoparticles in the range of 30-34 nm in diameter and 7 nm thick envelopes, consisting of 180 or 240 copies of identical polypeptide monomer. They also employ a distinctive position among the VLPs carriers due to the high-level synthesis, which serves as a strong protective capsid shell and efficient self-assembly properties. This review highlights on the bioengineering of HBc particles as dynamic nanocarriers for in vivo delivery and specific targeting to solid tumours.

AIE-Based Fluorescent Triblock Copolymer Micelles for Simultaneous Drug Delivery and Intracellular Imaging

Fluorescent drug delivery systems have received increasing attention in cancer therapy because they combine drug delivery and bioimaging into a single platform. For example, polymers with aggregation-induced emission (AIE) fluorophores, such as tetraphenylethylene (TPE), have emerged as an elegant choice for drug delivery/bioimaging applications. In this work, we report one-pot sequential organocatalytic ring-opening polymerization of ε-caprolactone (CL) and ethylene oxide (EO) using TPE-(OH)₂ as a difunctional initiator, in the presence of a t-BuP₂/TEB Lewis pair (catalyst), in THF at room temperature. Two well-defined triblock copolymers with inverse block sequences, TPE-(PCL-b-PEO)₂ and TPE-(PEO-b-PCL)₂, were synthesized by altering the sequential addition of CL and EO. The physicochemical properties, including hydrodynamic diameter, morphology, and AIE properties of the synthesized amphiphilic triblock copolymers were investigated in aqueous media. The block copolymer micelles were loaded with anticancer drugs doxorubicin and curcumin to serve as drug delivery vehicles. In vitro studies revealed the accelerated drug release at lower pH (5.5), which mimics the tumor microenvironment, different from the physiological pH (7.4). In vitro cytotoxicity studies demonstrated that the neat block copolymer micelles are biocompatible, while drug-loaded micelles exhibited a significant cytotoxic effect in cancer cells. Cellular uptake, examined by confocal laser scanning microscopy, showed that the block copolymer micelles were rapidly internalized by the cells with simultaneous emission of TPE fluorophore. These results suggest that these triblock copolymers can be utilized for intracellular bioimaging.

Biodegradable Polymer Theranostic Fluorescent Nanoprobe for Direct Visualization and Quantitative Determination of Antimicrobial Activity

We report a biodegradable fluorescent theranostic nanoprobe design strategy for simultaneous visualization and quantitative determination of antibacterial activity for the treatment of bacterial infections. Cationic-charged polycaprolactone (PCL) was tailor-made through ring-opening polymerization methodology, and it was self-assembled into well-defined tiny 5.0 ± 0.1 nm aqueous nanoparticles (NPs) having a zeta potential of +45 mV. Excellent bactericidal activity at 10.0 ng/mL concentration was accomplished in Gram-negative bacterium Escherichia coli (E. coli) while maintaining their nonhemolytic nature in mice red blood cells (RBC) and their nontoxic trend in wild-type mouse embryonic fibroblast cells with a selectivity index of >10⁴. Electron microscopic studies are evident of the E. coli membrane disruption mechanism by the cationic NP with respect to their high selectivity for antibacterial activity. Anionic biomarker 8-hydroxy-pyrene-1,3,6-trisulfonic acid (HPTS) was loaded in the cationic PCL NP via electrostatic interaction to yield a new fluorescent theranostic nanoprobe to accomplish both therapeutics and diagnostics together in a single nanosystem. The theranostic NP was readily degradable by a bacteria-secreted lipase enzyme as well as by lysosomal esterase enzymes at the intracellular compartments in <12 h and support their suitability for biomedical application. In the absence of bactericidal activity, the theranostic nanoprobe functions exclusively as a biomarker to exhibit strong green-fluorescent signals in live E. coli. Once it became active, the theranostic probe induces membrane disruption on E. coli, which enabled the costaining of nuclei by red fluorescent propidium iodide. As a result, live and dead bacteria could be visualized via green and orange signals (merging of red+green), respectively, during the course of the antibacterial activity by the theranostic probe. This has enabled the development of a new image-based fluorescence assay to directly visualize and quantitatively estimate the real-time antibacterial activity. Time-dependent bactericidal activity was coupled with selective photoexcitation in a confocal microscope to demonstrate the proof-of-concept of the working principle of a theranostic probe in E. coli. This new theranostic nanoprobe creates a new platform for the simultaneous probing and treating of bacterial infections in a single nanodesign, which is very useful for a long-term impact in healthcare applications.

Codelivery of Hydrophobic and Hydrophilic Drugs by Graphene-Decorated Magnetic Dendrimers

In this study, a nanocarrier was prepared for the codelivery of a hydrophilic drug (doxorubicin) and a hydrophobic drug (curcumin) to cancer cells. In this nanocarrier, the edges of graphene oxide sheets were decorated with a magnetic-functionalized polyamidoamine dendrimer with hydrazone groups at the end of the polymer. The edge functionalization of graphene sheets not only improved the solubility and dispersibility of graphene sheets but also imparted the magnetic properties to the nanocarrier. The resulting nanocarrier was loaded with doxorubicin through the covalent linkage and curcumin through π-π stacking. The nanocarrier showed a pH-sensitive release for both drugs, and the drug release behavior was also improved by the coimmobilization of both drugs. The cytotoxicity assay of nanocarrier showed low toxicity toward MCF-7 cell compared to unmodified graphene oxide, which was attributed to the presence of a magnetic dendrimer. Besides, the drug-loaded nanocarrier was highly toxic for cells even more than for free drugs. The cellular uptake images revealed higher drug internalization for coloaded nanocarrier than for the nanocarrier loaded with one drug alone. All of the results showed that the codelivery of curcumin and doxorubicin in the presence of the nanocarrier was more effective in chemotherapy than the nanocarrier loaded with one drug.

Recent Advances in Polyesters for Biomedical Imaging

Several synthetic materials exhibiting contrast imaging properties have become vital to the field of biomedical imaging. Polymeric biomaterials and metals are commonly used imaging agents and can assist in the monitoring of therapy response, migration, degradation, changes in morphology, defects, and image-guided surgery. In comparison to metals, most bio and synthetic polymers lack inherent imaging properties. Polymeric biomaterials, specifically polyesters, have gained a considerable amount of attention due to their unique properties including biocompatibility, biodegradation, facile synthesis, and modification capability. Polyester implants and nanomaterials are available on the market or are in clinical trials for many applications including: dental implants, cranio-maxilofacial implants, soft tissue sutures and staples, abdominal wall repair, tendon and ligament reconstruction, fracture fixation devices, and coronary drug eluting stents. This review aims to provide a summary of the recent developments of polyesters with bioimaging contrast properties. The three main approaches to prepare bioimaging polyesters (coating, encapsulation, and functionalization) are discussed in depth. Furthermore, commonly used imaging modalities including X-ray computed tomography, magnetic resonance imaging, ultrasound, fluorescence, and radionucleotide polyester contrast agents are highlighted. In each section, examples of impactful bioimaging polyesters in the five major imaging modalities are evaluated.

Phthalocyanine photosensitizer in polyethylene glycol-block-poly(lactide-co-benzyl glycidyl ether) nanocarriers: Probing the contribution of aromatic donor-acceptor interactions in polymeric nanospheres

For best photosensitizer activity phthalocyanine dyes used in photodynamic therapy should be molecularly dispersed. Polyethylene glycol-block-polylactide derivatives presenting benzyl side-groups were synthesized to encapsulate a highly lipophilic phthalocyanine dye (AlClPc) and evaluate the effect of π-π interactions on the nanocarrier colloidal stability and dye dispersion. Copolymers with 0, 1, 2 and 6 mol% of benzyl glycidyl ether (BGE) were obtained via polyethylene glycol initiated ring-opening copolymerization of D,l-lactide with BGE. The block copolymers formed stable, monodisperse nanospheres with low in vitro cytotoxicity. AlClPc loading increased the nanosphere size and affected their colloidal stability. The photo-physical properties of the encapsulated dye, studied in batch and after separation by field flow fractionation, demonstrated the superiority of plain PEG-PLA over BGE-containing copolymers in maintaining the dye in its monomeric (non-aggregated) form in aqueous suspension. High dye encapsulation and sustained dye release suggest that these nanocarriers are good candidates for photodynamic therapy.

π-Conjugated Chromophore Incorporated Polystyrene Nanobeads as Single Optical Agent for Three-Channel Fluorescent Probe in Bioimaging Application

Fluorescent polystyrene (PS) nanobeads in the size range ∼70-120 nm incorporating perylene bisimide (PBI-PS) and/or oligo(p-phenylenevinylene) (OPV-PS) was developed by miniemulsion polymerization technique. A dye loading content (DLC) of <3% was sufficient to impart high fluorescence emission capability to the PS beads. OPV-PS exhibited emission in the range 400-550 nm with peak emission at 450 nm (λ_ex = 350 nm; ϕ_FL = 26%); PBI-PS showed emission from 520-650 nm with peak emission at 545 nm (λ_ex = 490 nm; ϕ_FL = 9.7%) in 1× PBS buffer, whereas OPV(PBI)-PS nanobeads incorporating both the fluorophores exhibited multicolor emission capabilities (λ_ex from 350 to 490 nm). The nanoparticles were characterized by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS) for size and zeta potential for surface charge. For bioimaging applications, the PS nanoparticles were incubated with HeLa cells. Cell viability analysis involving HeLa cells showed more than 90% cell viability confirming the biocompatibility of the PS beads. The cellular uptake of the nanoparticles was confirmed by flow cytometry analysis and confocal laser scanning microscopy (CLSM) images. The subcellular localization of the nanoparticles in the cytoplasm could be precisely established by their simultaneous multicolor emission. The PS-based single optical agent presented here that can function as three-channel fluorescent probe to meet the requirements for multicolor bioimaging is advantageous.

Synthesis and biological properties of water-soluble polyphenylthiophene brushes with poly(ethylene glycol)/polyzwitterion side chains

Two types of water-soluble polyphenylthiophene brushes with poly(ethylene glycol) and polyzwitterion side chains were synthesized and studied as bioprobes.

The biocompatible polythiophene-g-polycaprolactone copolymer as an efficient dopamine sensor platform

Amphiphilic copolymers consisting of an all conjugated polythiophene backbone and sparsely attached oligo-ε-caprolactone side chains have been prepared.

Triple Block Nanocarrier Platform for Synergistic Cancer Therapy of Antagonistic Drugs

A unique biodegradable triple block nanocarrier (TBN) is designed and developed for synergistic combination therapy of antagonistic drugs for cancer treatment. The TBN was built with hydrophilic polyethylene glycol (PEG) outer shell; a middle hydrophobic and biodegradable polycaprolactone (PCL) block for encapsulating anthracycline anticancer drug like doxorubicin (DOX), and an inner carboxylic-functionalized polycaprolactone (CPCL) core for cisplatin (CP) drug conjugation. TBN-cisplatin drug conjugate self-assembled as stable nanoparticles in saline (also in PBS) wherein the hydrophobic PCL block functions as a shield for Pt-drug stability against GSH detoxification. Enzymatic-biodegradation of TBN exclusively occurred at the intracellular environment to deliver both cisplatin (CP) and doxorubicin (DOX) simultaneously to the nucleus. As a result, the TBN-cisplatin conjugate and its DOX-loaded nanoparticles accomplished 100% cell growth inhibition in GSH overexpressed breast cancer cells. Combination therapy revealed that free drugs were antagonistic to each other, whereas the dual drug-loaded TBN exhibited excellent synergistic cell killing at much lower drug concentrations in breast cancer cells. Confocal microscopic analysis confirmed the localization of drugs in the cytoplasm and at peri-nuclear site. Flow cytometry analysis revealed that the drugs were taken up 4-fold better while delivering them from TBN platform compared to free form. The TBNs approach is a perfect platform to overcome the GSH detoxification in Pt-drugs and enable the codelivery of antagonistic drugs like cisplatin and DOX from single polymer dose to accomplish synergistic killing in breast cancer cells.