Heparin-Like Chitosan Hydrogels with Tunable Swelling Behavior, Prolonged Clotting Times, and Prevented Contact Activation and Complement Activation

Regenerated carboxymethyl cellulose beads for selective removal of low-density lipoprotein from whole blood

Low-density lipoprotein (LDL) plays a crucial role in the development of cardiovascular disease. Lowering the level of LDL is an effective therapeutic strategy for treating cardiovascular disease. Here, we developed a facile and robust method to prepare carboxymethyl cellulose beads (CMCBs) for selectively adsorbing LDL. CMCBs had plentiful carboxyl groups and large numbers of nanopores on their surface. The in vitro assay reveals that CMCBs had a high LDL adsorbing capability of 7.67 ± 0.16 mg/g, owing to the carboxyl group-induced electrostatic adsorption and the nanopore-mediated trapping effect. CMCBs also possessed the excellent mechanical strength to resist the impact of rushing blood. Moreover, CMCBs were highly blood-compatible and had anticoagulant activity. The in vivo experiment reveals that LDL were significantly reduced from 15.02 ± 1.62 to 9.35 ± 1.71 mmol/L after blood perfusion using CMCBs, while minimal side effects were detected for the blood routine parameters. The study provides an easy-to-fabricate adsorbent for selective and efficient clearance of LDL in hemoperfusion.

Bioinspired Zn-MOF doped radial porous chitosan-based sponge with antibacterial and antioxidant properties for rapid hemostasis and wound healing

Herein, a novel bioinspired radial porous zinc-based metal-organic framework (Zn-MOF) doped sodium alginate/chitosan derivatives/pullulan-based SA/PSCS/Pul/Zn-MOF (SPCP/Zn) composites sponge with excellent antioxidant and antibacterial properties was fabricated by the ice-templating method. Boric acid (BA) and Ca2+, which were respectively used as hydrogen- and ionic- bonding cross-linkers, provided strong mechanical properties for sponge matrix composed of SA, PSCS, and Pul. The obtained SPCP/Zn sponge exhibited uniform porous morphology, proper hydrophilicity, and admirable biocompatibility. In addition, the SPCP/Zn sponge achieved a sustained release of Zn2+ and gallic acid, which displayed powerful antibacterial and antioxidant activities. Importantly, the SPCP/Zn sponge exhibited shorter rapid hemostasis (20.4 ± 2.9 s) and lower blood loss (19.8 ± 4.3 mg). The SPCP/Zn sponge also showed faster wound closure ratio for the rat full-thickness skin defect model. It was revealed that SPCP/Zn sponge could significantly accelerate and enhance wound healing through downregulating inflammatory cytokines (TNF-α, IL-6) and increasing the expression of growth factors (VEGF). Due to its excellent properties, the SPCP/Zn sponge may have promising potential in wound healing applications.

Carboxyl PEGylation of magnetic nanoparticles as antithrombotic and thrombolytic agents by calcium binding

Known to be biocompatible and hemocompatible, polyethylene glycol (PEG) has been widely used as anti-fouling coating of biomaterials. Nanoparticles coated with functionalized PEG were also investigated for their nano-cell interactions, but seldomly on the coagulation system, especially with platelets. Both experiments and molecular dynamic simulations indicate that terminal carboxylation of PEG promotes its binding with calcium, especially in the ionized form, which makes it potential anticoagulants. Further, the carboxyl PEGylated magnetic nanoparticle (HOOC-PEG₂₀₀₀-MNP) exhibits significantly increased anticoagulant and antiplatelet properties, by entering the open canalicular system (OCS) of human platelets and binding with the cytoplasmic calcium ions. HOOC-PEG₂₀₀₀-MNP also acts as effective thrombolytic agents in dissolving mature blood clots under oscillating magnetic field both in vitro and in vivo. Therefore, the carboxyl PEGylated magnetic nanoparticles are prototype agents for antithrombotic and thrombolytic therapies and provide a versatile platform for targeted and effective treatments of acute cardiovascular diseases.

Preparation of fully bio-based multilayers composed of heparin-like carboxymethylcellulose sodium and chitosan to functionalize poly (l-lactic acid) film for cardiovascular implant applications

In this study, heparin-like polysaccharides were successfully produced by sulfation of carboxymethylcellulose sodium, then a fully biobased bilayer composed of sulfated carboxymethylcellulose sodium (SCMC) and chitosan (CS) was composited on the surface of Poly (L-lactic acid) (PLA) through layer-by-layer (LBL) assembly for the potential blood-contact application such as bioresorbable vascular scaffold. The preliminary structure and bioactivity of SCMC with different degree of sulfation were investigated, and the SCMC with best performance was selected. The surface chemical compositions, morphologies and wettability of SCMC/CS multilayer-modified PLA films were researched by X-ray photoelectron spectrometer, scanning electron microscopy and water contact angle meter. A series of anticoagulation tests of SCMC/CS multilayer-modified PLA films were performed. In term of (SCMC/CS)₁₅ multilayer-modified PLA film, the protein adsorption and plate adhesion decreased by 44.6 % and 71.5 %, respectively, the activated partial thromboplastin time prolonged by 11.9 times and thrombin time exceed 300 s, the contact activation and hemolysis rate significantly reduced compared with unmodified PLA film. Besides, this modified PLA films performed good cytocompatibility to L929 fibroblast cells, excellent anti-inflammatory and antibacterial abilities. In conclusion, the multifunctional SCMC/CS multilayer-modified PLA films with hemocompatibility, cytocompatibility, anti-inflammatory and antibacterial properties may have promising potential in future clinical applications.

Molecularly-imprinted hydrogel beads via self-sacrificing micro-reactors as safe and selective bilirubin adsorbents

For patients who are suffering from liver dysfunction or metabolic obstruction, excessive bilirubin (BIL) in their bodies may cause jaundice with irreversible cerebral injury. Traditional exchange transfusion and photodynamic therapy pose a risk of serious adverse reactions or limited curative effects. Therefore, as a generally used treatment, hemoperfusion (HP) purifies patients' blood with solid adsorbents. However, the development of clinical BIL absorbents is greatly impeded by low selectivity and unsatisfactory blood compatibility. Herein, inspired by oviparity, we propose BIL-imprinted poly(acrylic acid-co-sodium p-styrenesulfonate)-reduced graphene oxide (PAA-SS-rGO@BIL) hydrogel beads as BIL adsorbents via self-sacrificing micro-reactors. In the micro-reactors, cross-linked polymerization is achieved and a solidified gel is formed. The received hydrogel beads show outstanding selective adsorption capabilities toward BIL due to the recognition sites, and π-π and hydrophobic interactions. Such hydrogel beads possess superior blood compatibility owing to their bioinspired heparin-mimicking gel structure. Simulated BIL selective adsorption experiments in vitro demonstrate that the BIL concentrations in the plasma of a patient with severe jaundice can be restored to a moderate level within 3 hours. Therefore, hydrogel beads offer new options for clinical BIL adsorption.

Intrinsic Antibacterial and Conductive Hydrogels Based on the Distinct Bactericidal Effect of Polyaniline for Infected Chronic Wound Healing

Most chronic wounds suffer from infections, and their treatment is challenging. The usage of antibiotics may lead to bacterial resistance and adverse side effects. Positively charged substances have shown promise, but their applications are usually limited by certain cytotoxicity or complex synthesis. Doped polyaniline that carries a high density of positive charges would be a promising candidate due to its good biocompatibility and easy availability, but its interaction with bacteria has not been elucidated. Herein, the distinct bactericidal effect of polyaniline against Gram-positive bacteria has been verified. The antibacterial activity may result from the specific interaction with lipoteichoic acid to destroy the Gram-positive bacterial cell wall. Polyaniline and a macromolecular dopant (sulfonated hyaluronic acid) are used to construct a flexible hydrogel with skin-mimic electrical conductivity. The in vivo results demonstrate that electrical stimulation (ES) through this hydrogel is superior to ES via separated electrodes (the ES strategy used clinically) for promoting infected chronic wound healing.

Preparation of modified polysulfone material decorated by sulfonated citric chitosan for haemodialysis and its haemocompatibility

Polysulfone (PSF) works potentially in haemodialysis due to its great mechanical and chemical stability, but performs poorly in haemocompatibility. For promoting the unpleasant haemocompatibility, sulfonated citric chitosan (SCACS) with the structure and groups similar to heparin was primarily synthesized by acylation and sulfonation. Furthermore, the chloroacylated PSF was pretreated by electrophilic chloroacetyl chloride to achieve more active sites for further reaction; the following membranes underwent the amination and were named amination polysulfone (AMPSF) membranes. Moreover, SCACS with abundant carboxyl and sulfonic groups was covalently grafted at the surface of pretreated PSF membranes, called PSF-SCACS membranes. The PSF-SCACS membranes were successfully synthesized and characterized by 1H NMR, ATR-FTIR and XPS. In addition, the water contact angle of PSF-SCACS membranes decreased by 47° and the morphologies of the membranes changed little compared with the unmodified PSF membranes. The haemocompatible testing results, including protein adsorption, platelet adhesion, haemolysis rate, plasma recalcification time, activated partial thromboplastin time (APTT), prothrombin time (PT) and thrombin time (TT), demonstrated that the PSF-SCACS membranes possessed excellent haemocompatible performances, and SCACS played an important role in the modification.

Affinity Hydrogels for Protein Delivery

Proteins have been studied as therapeutic agents for treatment of various human diseases. However, the delivery of protein drugs into the body is challenging. In this review, we summarize and highlight progress in developing affinity hydrogels (i.e., hydrogels functionalized with protein-bound ligands) for controlled protein release. Contrary to traditional hydrogels, which release proteins mainly through diffusion, affinity hydrogels stably retain and sustainably release proteins based mainly on diffusion coupled with a binding reaction. These hydrogels can also be modulated to release proteins in response to defined molecules in a triggered manner. Future research efforts may focus on the development of intelligent affinity hydrogels to mimic the properties of human tissues in sensing different environmental stimuli for on-demand release of single or multiple proteins (i.e., biomimetic intelligence for protein delivery).

Preparation of polymyxin B-loaded gellan-polylysine polyion complex fibers with high affinity to endotoxin

Endotoxemia, a life-threatening disease affecting people worldwide, can be treated by hemoperfusion alone. New hemoperfusion materials with high biocompatibility and endotoxin-combination ability are always in demand. Herein, polymyxin B (PMB), a specific endotoxin binding molecule, was loaded onto gellan-polylysine polyion complex, and the obtained material was used in preparing wet-spun fibers. The tensile strength of the as-spun yarns (100 fibers) ranged from 1.49 N to -1.58 N and that of the dried and rewetted yarns ranged from 1.45 N to 1.56 N. The adsorption ability of the fibers with lipopolysaccharides from E. coli was 2.784 ± 0.036 EU/mg in simulated human body fluid and 2.452 ± 0.107 EU/mg in mouse plasma. The fibers showed no cytotoxicity toward U2OS cells and no hemolysis toward mouse blood. The influence of the fibers on the clotting time of mouse blood was negligible, and the blood cells were not adhesive to the fibers. Thus, the PMB-loaded gellan-polylysine complex fiber and its derivate fabrics can be used in hemoperfusion.

Hemocompatible magnetic particles with broad-spectrum bacteria capture capability for blood purification

Pathogen capture and removal from whole blood is a new strategy for extracorporeal blood purification, especially in initial treatment of sepsis before pathogen identification. Herein, hemocompatible magnetic particles with broad-spectrum bacteria capture capability were proposed for pathogen removal from whole blood, omitting the necessity of pathogen identification. Firstly, we designed and synthesized a new kind of imidazolium-based ionic liquid with good antibacterial activity, and polydopamine coating was utilized as a hemocompatible platform to immobilize ionic liquids on Fe₃O₄ nanoparticles, forming the hemocompatible magnetic particles (Fe₃O₄@PDA-IL). The magnetic particles exhibited good hemocompatibility and performed well in the removal of various species of clinically significant pathogens from human whole blood, including S. aureus, E. coli, and the hard-to-treat bacteria of P. aeruginosa and Methicillin-resistant S. aureus, which are the most common pathogens in bloodstream infections. Besides, the Fe₃O₄@PDA-IL particles were also capable to remove bacterial endotoxins from blood, inhibiting further aggravation of sepsis. Overall, we demonstrated the application of hemocompatible magnetic particles in the removal of pathogens and bacterial endotoxins from whole blood via electrostatic and hydrophobic interactions, without significant effects on blood cells or the activation of coagulation and complement, addressing the feasibility of using imidazolium-based ionic liquids for bacteria capture and removal from whole blood. It would contribute to the development of magnetic separation-based approaches to remove bacteria and bacterial endotoxin for extracorporeal blood purification, especially in initial sepsis therapy before pathogen identification.

Preparation of multifunctional poly(l-lactic acid) film using heparin-mimetic polysaccharide multilayers: Hemocompatibility, cytotoxicity, antibacterial and drug loading/releasing properties

Poly(l-lactic acid) (PLLA) has been the most commonly used polymer for making bioresorbable vascular scaffolds (BVS). Despite owning remarkable properties, BVS made from PLLA are facing higher rates of early thrombosis compared with permanent metallic scaffolds. To solve this issue, we modified the PLLA film surface with heparin-mimetic polysaccharide multilayers consisting of sulfated Chinese yam polysaccharide (SCYP) and chitosan (CS) through layer-by-layer (LBL) assembly. The surface chemical compositions, morphologies and growth manner of SCYP/CS multilayers were investigated using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and UV-vis spectroscopy. The relevant hemocompatibility results showed that multilayer-modified PLLA could effectively resist protein adsorption, suppress the platelet adhesion, prolong clotting time, prevent contact and complement activation as well as reduce hemolysis rate. Moreover, the multilayer-modified PLLA exhibited non-cytotoxicity, good antibacterial ability against E. coli and S. aureus, and drug loading/sustained releasing behavior. Overall, the multifunctional PLLA film with integrated properties of hemocompatibility, non-cytotoxicity, antibacterial and drug loading/releasing behavior could be successfully achieved by deposition of SCYP/CS multilayers, which will have potential application in blood-contacting biomedical materials.

A chitosan modified asymmetric small-diameter vascular graft with anti-thrombotic and anti-bacterial functions for vascular tissue engineering

Rapid endothelialization and prevention of restenosis are two vital challenges for the preparation of a small-diameter vascular graft (SDVG), while postoperative infection after implantation is often neglected.

Heparin-based and heparin-inspired hydrogels: size-effect, gelation and biomedical applications

Heparin is the highest negatively charged biomolecule, which is a polysaccharide belonging to the glycosaminoglycan family, and its role as a regulator of various proteins, cells and tissues in the human body makes it an indispensable macromolecule. Heparin-based hydrogels are widely investigated in various applications including implantation, tissue engineering, biosensors, and drug-controlled release due to the 3D-constructs of hydrogels. However, heparin has supply and safety problems because it is usually derived from animal sources, and has the clinical limitations of bleeding and thrombocytopenia. Therefore, analogous heparin-mimicking polymers and hydrogels derived from non-animal and/or totally synthetic sources have been widely studied in recent years. In this review, the progress and potential biomedical applications of heparin-based and heparin-inspired hydrogels are highlighted. We classify the forms of these hydrogels by their size including macro-hydrogels, injectable hydrogels, and nano-hydrogels. Then, we summarize the various fabrication strategies for these hydrogels including chemical covalent bonding, physical conjugation, and the combination of chemical and physical interactions. Covalent bonding includes free radical polymerization of vinyl-containing components, amide bond formation reaction, Michael-type addition reaction, click-chemistry, divinyl sulfone crosslinking, and mussel-inspired coating. Hydrogels physically conjugated via host-guest interaction, electrostatic interaction, hydrogen bonding, and hydrophobic interaction are also discussed. Finally, we conclude with the challenges and future directions for the fabrication and the industrialization of heparin-based and heparin-inspired hydrogels. We believe that this review will attract more attention toward the design of heparin-based and heparin-inspired hydrogels, leading to future advancements in this emerging research field.

Preparation and evaluation of Bletilla striata polysaccharide/graphene oxide composite hemostatic sponge

Uncontrolled bleeding is an important cause of military and civilian casualties. GO has received more attention in the field of hemostasis. However, pure GO has various limitation in application due to its potential thrombosis, hemolytic and cytotoxicity. Herein, we present a simple, rapid and low-cost method to combine GO and natural polysaccharides by hydrogen bonding to prepare a new material Bletilla striata polysaccharide/graphene oxide composite sponge (BGCS). The BGCS was successfully synthesized and characterized by SEM, IR, RAMAN, XRD and Zeta potential analyzer analysis. The BGCS exhibited favorable biocompatibility. Besides, the porosity of BGCS was higher than 90% and showed good water absorption capacity. The results of whole blood coagulation evaluation showed that the BGCS can promote blood coagulation within 30 s without anticoagulant, showing excellent hemostatic effect. Further coagulation mechanism studies indicated that the surface of the BGCS possessed a high charge (-27.3 ± 0.9 mV) and showed strong platelet stimulation, the BGCS can also induce red blood cell aggregation, accelerate fibrin formation and accelerate blood coagulation. Therefore, the BGCS can stop bleeding within 50 s in rat-tail amputation models. The BGCS provides a new perspective for the safe application of GO in the field of trauma hemostasis.

In vitro and in vivo anticoagulant activity of heparin-like biomacromolecules and the mechanism analysis for heparin-mimicking activity

Heparin-like biomacromolecules (HepLBm), exhibiting similar chemical structure and biological properties to heparin, can be obtained by modifying either synthetic biopolymers or natural biomacromolecules with physical or chemical methods. In this work, a low-cost and biocompatible sodium alginate was chosen as a model biomacromolecule to design anticoagulant HepLBm with a similar sulfation degree to heparin. FTIR, ¹H NMR, and element analysis data were used to confirm the chemical structure of HepLBm. Hemolysis tests, clotting time, complement activation, and contact activation tests were carried out to determine the in vitro anticoagulant activity of HepLBm. In addition, systematic studies of blood cell count, coagulation function, and histopathology were performed to demonstrate the in vivo anticoagulant activity and toxicity of HepLBm with SD rat experiments. Furthermore, a series of linear molecules containing carboxyl groups, sulfonic groups, and hydroxyl groups were selected and their clotting time was tested to provide a mechanism analysis for the excellent anticoagulant activity of HepLBm. With the excellent in vitro/in vivo anticoagulant activity, good biocompatibility, and low cost, the HepLBm synthesized in this work would have great potential for substitution of heparin in many application fields, such as the surface modification of biomedical devices, extracorporeal anticoagulants, and other clinical fields.

Sulfonated Copolymers as Heparin-Mimicking Stabilizer of Fibroblast Growth Factor: Size, Architecture, and Monomer Distribution Effects

Fibroblast growth factors (FGF) are involved in a wide range of biological processes such as cell proliferation and differentiation. In living organisms, the binding of FGF to its receptors are mediated through electrostatic interactions between FGF and naturally occurring heparin. Despite its prevalent use in medicine, heparin carries notable limitations; namely, its extraction from natural sources (expensive, low yield and extensive purification), viral contamination, and batch-to-batch heterogeneity. In this work a range of synthetic homopolymers and copolymers of sodium 2-acrylamido-2-methylpropanesulfonate were evaluated as potential FGF stabilizers. This was studied by measuring the proliferation of BaF3-FR1c cells, as a model assay, and the results will be compared with the natural stabilization and activation of FGF by heparin. This study explores the structure-activity relationship of these polysulfonated polymers with a focus on the effect of molecular weight, comonomer type, charge dispersion, and polymer architecture on protein stabilization.

A mussel-inspired approach towards heparin-immobilized cellulose gel beads for selective removal of low density lipoprotein from whole blood

In this study, we report a mussel-inspired approach to fabricate heparin-immobilized cellulose (HeTaCe) gel beads with self-anticoagulative and biocompatible properties which can selectively remove low density lipoprotein (LDL) from whole blood directly. First, a phase inversion technique was applied to prepare cellulose gel beads. Then the as-prepared gel beads were dipped into a mixed solution of heparin and tannic acid in phosphate buffered saline (PBS, pH 8.5) to obtain HeTaCe gel beads. Blood compatibility experiments indicated that the HeTaCe gel beads could suppress complement activation as well as contact activation and prolong the clotting times to the upper detect limits (activated partial thromboplastin time >600 s and thrombin time >180 s) of the automated blood coagulation analyzer. An ideal adsorption capacity of LDL in vitro was achieved by the HeTaCe gel beads with an amount of 79.1 mg/g. Besides, dynamic column adsorption test further demonstrated a selective adsorption of LDL without a significant reduction of high density lipoprotein (HDL) in a simulative hemoperfusion system. It is believed that the HeTaCe gel beads will be quite appealing to future clinical practice aiming at lowering LDL and improving the outcomes of patients with high cardiovascular risk.

Electrofabrication of functional materials: Chloramine-based antimicrobial film for infectious wound treatment

Electrical signals can be imposed with exquisite spatiotemporal control and provide exciting opportunities to create structure and confer function. Here, we report the use of electrical signals to program the fabrication of a chloramine wound dressing with high antimicrobial activity. This method involves two electrofabrication steps: (i) a cathodic electrodeposition of an aminopolysaccharide chitosan triggered by a localized region of high pH; and (ii) an anodic chlorination of the deposited film in the presence of chloride. This electrofabrication process is completed within several minutes and the chlorinated chitosan can be peeled from the electrode to yield a free-standing film. The presence of active NCl species in this electrofabricated film was confirmed with chlorination occurring first on the amine groups and then on the amide groups when large anodic charges were used. Electrofabrication is quantitatively controllable as the cathodic input controls film growth during deposition and the anodic input controls film chlorination. In vitro studies demonstrate that the chlorinated chitosan film has antimicrobial activities that depend on the chlorination degree. In vivo studies with a MRSA infected wound healing model indicate that the chlorinated chitosan film inhibited bacterial growth, induced less inflammation, developed reorganized epithelial and dermis structures, and thus promoted wound healing compared to a bare wound or wound treated with unmodified chitosan. These results demonstrate the fabrication of advanced functional materials (i.e., antimicrobial wound dressings) using controllable electrical signals to both organize structure through non-covalent interactions (i.e., induce chitosan's reversible self-assembly) and to initiate function-conferring covalent modifications (i.e., generate chloramine bonds). Potentially, electrofabrication may provide a simple, low cost and sustainable alternative for materials fabrication.

STATEMENT OF SIGNIFICANCE

We believe this work is novel because this is the first report (to our knowledge) that electronic signals enable the fabrication of advanced antimicrobial dressings with controlled structure and biological performance. We believe this work is significant because electrofabrication enables rapid, controllable and sustainable materials construction with reduced adverse environmental impacts while generating high performance materials for healthcare applications. More specifically, we report an electrofbrication of antimicrobial film that can promote wound healing.

Rationally designed magnetic nanoparticles as anticoagulants for blood purification

Heparin-based anticoagulant drugs are widely used for the prevention of blood clotting during extracorporeal circuit (bloodlines or cassette system) and surgical procedures as well as for the treatment of thromboembolic events. However, these anticoagulants are associated with bleeding risks that demand continuous monitoring and neutralization with antidotes. We explore the possibility of utilizing anticoagulants for blood clotting prevention, then removing them before transfusing the blood back to body, thus avoid bleeding risks. Here, we report on the strength of a strategy to solve problems with bleeding risks by rationally designing and using superparamagnetic iron oxide nanoparticles (SPIONs) with layer-by-layer self-assembled heparin. The morphology of these SPIONs was investigated by using dynamic light scattering and transmission electron microscopy. In vitro assays demonstrated superior efficacy and safety profiles and significantly mitigated conventional heparin-induced bleeding risks. In addition, the in vivo assay in a model animal (dog) proved that it is possible to use magnetic anticoagulant (MAC) in blood purification. The new magnetic anticoagulant drugs may benefit patients undergoing high-risk surgical procedures and may overcome anticoagulant-related bleeding problems to a great extent.

Water recycling efficacies of extremely hygroscopic, antifouling hydrogels

Water harvesting, reusable, and antifouling hydrogels have found various applications in the fields of nanotechnology, biomedicine, food production and agriculture. These water-releasing materials are generally comprised of hygroscopic natural polymers, such as alginate blended with ionic salts or thermo-responsive moieties, to aid the release of water from a network of hydrogels. In this report, we propose a simple strategy to develop novel, synthetic, hygroscopic hydrogels (in the absence of ionic salts or thermo-responsive moieties), capable of absorbing copious amount of water and allow the facile release of water at ambient temperatures, as a function of crosslinking density of the polymer chains. The first step in the development of hygroscopic hydrogels is the development of hygroscopic vitamin B5 analogous or pantothenic acid analogous monomer (B5AMA), by ring opening chemistry. The hygroscopic hydrogels are then prepared from B5AMA monomer at different cross-linker densities by free radical polymerization approach and are evaluated for their antifouling properties and for their water absorbing and release efficacies, as a function of temperature. The release of significant amount of water by B5AMA hydrogels at physiological temperature (37 °C), their repeated water absorption and desorption behavior and excellent antifouling properties, suggest their potential usage as water harvesting materials in arid regions.

Water recycling efficacies of B5AMA hydrogels at ambient temperature.

An aptasensor based on heparin-mimicking hyperbranched polyester with anti-biofouling interface for sensitive thrombin detection

In this paper, novel heparin-mimicking hyperbranched polyester nanoparticles (HBPE-SO₃ NPs) with abundant of sulfonated acid functional groups were synthesized, and their antithrombogenicities were further evaluated. Further, a label-free electrochemical aptamer biosensor (aptasensor) based on HBPE-SO₃ NPs modified electrode was developed for thrombin (TB) detection in whole blood. Meanwhile, the anti-biofouling properties of different modified electrodes were studied by whole blood and platelet adhesion test, hemolysis assay and morphological changes of red blood cells in vitro. Besides, the thrombin-binding aptamer was selected as receptor for the proposed aptasensor, which has excellent binding affinity and selectivity for TB. When binding to TB, the electron transfer taking place at the modified electrode interface was inhibited that can attribute to the stereo-hindrance effect, resulting in the decreased current response. This aptasensor showed excellent electrochemical properties with a wide detection range and a low detection limit of 0.031pM (S/N = 3), and provided high selectivity, long-term stability and good reproducibility. Finally, the sensitively detection of TB in whole blood samples directly was achieved by this aptasensor we proposed, which suggested its great potential for TB detection in the clinic.

Novel electrochemical immune sensor based on Hep-PGA-PPy nanoparticles for detection of α-Fetoprotein in whole blood

A simple and accurate immune sensor for quantitative detection of α-Fetoprotein (AFP) was developed based on the immobilization of antigen on the surface of Hep-PGA-PPy nanoparticles modified glassy carbon electrodes (GCE). The obtained Hep-PGA-PPy nanoparticles were characterized by fourier transform infrared (FT-IR) spectra and transmission electron microscopy (TEM). And the blood compatibility of Hep-PGA-PPy nanoparticles was investigated by in vitro coagulation tests, hemolysis assay and whole blood adhesion tests. Combining the conductive property of polypyrrole (PPy) and the biocompatibility of heparin (Hep), the Hep-PGA-PPy nanoparticles could improve not only the anti-biofouling effect the electrode, but also improved the electrochemical properties of the immune sensor. Under optimal conditions, the proposed immune sensor could detect AFP in a linear range from 0.1 to 100 ng mL^-1 with a detection limit of 0.099 ng mL^-1 at the signal-to-noise ratio of 3, and it also possessed good reproducibility and storage stability. Furthermore, the detection of AFP in five human blood samples also showed satisfactory accuracy with low relative errors. Thus, the developed immune sensor which showed acceptable reproducibility, selectivity, stability and accuracy could be potentially used for the detection of whole blood samples directly.

Direct catechol conjugation of mussel-inspired biomacromolecule coatings to polymeric membranes with antifouling properties, anticoagulant activity and cytocompatibility

TheO-sulfated chitosan andN,O-sulfated chitosan coatings were prepared by direct catechol conjugation to enrich the biological applications of polymeric membranes.