Antimicrobial Chitosan and Chitosan Derivatives: A Review of the Structure–Activity Relationship

Carboxymethyl chitosan/alendronate sodium/Sr2+ modified TiO2 nanotube arrays enhancing osteogenic activity and antibacterial property

Titanium and its alloys are widely used as orthopedic implants owing to their good mechanical properties and excellent corrosion resistance. However, the insufficient osteogenic activity and antibacterial properties hinder their clinical applications. To address these issues, TiO2 nanotube arrays (TNT) were first fabricated on the TA2 alloy surface via an anodizing technique, and strontium ions (Sr2+) were then loaded by hydrothermal reaction (TNT + Sr) and annealing treatment (TNT + A). Subsequently, the polydopamine layer (TNT + PDA) was constructed to immobilize the carboxymethyl chitosan and alendronate sodium (TNT + CA) mixture. The prepared coatings were thoroughly characterized by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectrometer (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffractometer (XRD), and water contact angle measurement. The results confirmed that Sr2+ ions, polydopamine, and carboxymethyl chitosan/alendronate sodium were successfully immobilized on the nanotubes. The coating of TNT + CA significantly enhanced the hydrophilicity, and effectively delayed the release of Sr2+ and alendronate. The TNT + CA coating significantly promoted osteoblast adhesion and proliferation, and up-regulated the expressions of alkaline phosphatase (ALP), osteocalcin (OCN), and osteoblast-specific transcription factor (RUNX2). TNT + CA was able to rapidly induce in situ hydroxyapatite deposition from the simulated body fluid (SBF). Moreover, TNT + CA coating showed inhibition against Escherichia coli and Staphylococcus aureus (especially against Escherichia coli). The prepared TNT + CA coating provides a novel strategy for enhancing bone affinity, improving osteoblast behaviors, and antibacterial properties of titanium-based biomaterials.

Stretchable Polymer Hydrogels Based Flexible Triboelectric Nanogenerators for Self-Powered Bioelectronics

The rapid development of flexible electronics has led to unprecedented social and economic improvements. But conventional power devices cannot adapt to the advances of flexible electronics. Triboelectric nanogenerators (TENGs) have been used as robust power sources to transform ambient mechanical energy into electricity, thus meeting the power requirements of flexible electronics. Hydrogels are widely used for soft bioelectronics owing to the decent stretchability and biocompatibility. This Review presents the recent progress in the use of hydrogels for TENGs and self-powered hydrogel bioelectronics, including hydrogel synthesis, hydrogel TENGs fabrication, and their applications in wearable electricity generation, self-powered active sensing, and therapeutics. Hydrogel-enabled TENGs are emerging as a novel form of soft bioelectronics. We provided a critical analysis of hydrogel TENGs and insights into future opportunities and directions of this rapidly evolving field. These advancements will push the boundaries of hydrogel bioelectronics and contribute to the development of personalized healthcare solutions.

Three intertwining effects guide the mode of action of chitin deacetylase de- and N-acetylation reactions

Chitosans are promising multi-functional biomolecules for various applications whose performance is dependent on three key structural parameters, including the pattern of acetylation (PA). To date, chitin deacetylases (CDAs) are the only tool to control the PA of chitosan polymers via their specific mode of action during de- or N-acetylation. For a start, this review summarizes the current state of research on the classification of carbohydrate esterase 4 enzymes, the features in sequence and structure of CDAs, and the different PAs produced by different CDAs during de- or N-acetylation. In the main part, we introduce three effects that guide the mode of action of these enzymes: the already established subsite capping effect, the subsite occupation effect, and the subsite preference effect. We show how their interplay controls the PA of CDA products and describe their molecular basis. For one thing, this review aims to equip the reader with the knowledge to understand and analyze CDAs - including a guide for in silico and in vitro analyses. But more importantly, we intend to reform and extend the model explaining their mode of action on chitosans to facilitate a deeper understanding of these important enzymes for biology and biotechnology.

Study on the inhibition of non-small cell lung cancer mediated by chitosan-based gene carrier delivering STAT3-shRNA

Systemic chemotherapy and radiotherapy often yield poor effect in the postoperative treatment of non-small cell lung cancer (NSCLC) and induce drug resistance. Herein, we proposed a targeted therapeutic approach utilizing gene carrier-mediated specific shRNA method. Firstly, the targeted short hairpin shRNA sequence, designed based on the STAT3 gene sequence, was inserted into the eukaryotic expression vector pGPU6/GFP/Neo to form the recombinant plasmid STAT3-shRNA. Next, a novel gene carrier, Vitamin E Succinate-Chitosan-Histidine (VES-CTS-His, VCH), was synthesized through an acylation reaction. The VCH was combined with pGPU6/GFP/Neo STAT3-shRNA recombinant plasmid by electrostatic interactions to form stable particles. VCH/pDNA, with typical nanoscale dimensions, could accumulate in tumor tissues through the EPR effect and enter tumor cells via endocytosis. VCH exhibited good pH responsiveness and could dissociate in the acidic microenvironment of tumors, thereby releasing the plasmids. Subsequently, the plasmids could downregulate STAT3 expression through RNAi effect. Inhibiting or blocking the expression of the STAT3 gene could significantly enhance the apoptotic induction and growth inhibition effects on NSCLC cells through the PI3K and mTOR signaling pathways, thereby achieving the goal of tumor treatment. This study provides a novel method for the construction of novel non-viral gene carriers and clinical gene-targeted therapy for NSCLC.

Tribological Properties of Synthetic and Biosourced Lubricants Enhanced by Graphene and Its Derivatives: A Review

This review explores the tribological properties of biosourced lubricants (biolubricants) enhanced by graphene (Gr) and its derivatives and hybrids. Friction and wear at mechanical interfaces are the primary causes of energy loss and machinery degradation, necessitating effective lubrication strategies. Traditional lubricants derived from mineral oils present environmental challenges, leading to an increased interest in biolubricants derived from plant oils and animal fats. Biolubricants offer high biodegradability, renewability, and low toxicity, positioning them as ecofriendly alternatives. This work extensively reviews the role of Gr-based nanoadditives in enhancing the lubrication properties of biolubricants. Gr with its exceptional physicomechanical properties has shown promise in reducing friction and wear. The review covers various Gr derivatives, including Gr oxide (GO) and reduced Gr oxide (r-GO), and their performance as lubrication additives. The discussion extends to Gr hybrids with metals, polymers, and other 2D materials, highlighting their synergistic effects on the tribological performance. The mechanisms through which these additives enhance lubrication, such as the formation of protective films and improved interactions between lubricants and tribopairs, are examined. Emphasis is placed on the environmental benefits and potential performance improvements of Gr-based biolubricants. Finally, by analyzing current research and technological trends, the paper outlines future prospects for optimizing lubricant formulations with Gr-based nanoadditives, aiming for more sustainable and efficient tribological applications.

A review of chitosan role in milk bioactive-based drug delivery, smart packaging and biosensors: Recent advances and developments

Chitosan, a versatile biopolymer derived from chitin, is increasingly recognized in the milk industry for its multifunctional applications in drug delivery, smart packaging, and biosensor development. This review provides a comprehensive analysis of recent advances in chitosan production techniques. These include chemical, biological, and novel methods such as deep eutectic solvents (DES), microwave-assisted approaches, and laser-assisted processes. Surface modification strategies to enhance its functional properties are also discussed. The review highlights the development of various chitosan-based nanocarriers, including nanoparticles, nanofibers, nanogels, and nanocomposites. It emphasizes their stability when combined with milk bioactive ingredients like lipids, peptides, lactose, and minerals. The gastrointestinal fate and safety of chitosan nanoparticles are critically evaluated, showcasing their potential for safe consumption in dairy-related applications. In drug delivery systems, chitosan exhibits excellent compatibility with milk-derived carbohydrates, proteins, and minerals, enabling the development of innovative drug delivery platforms. Additionally, its incorporation into smart packaging materials enhances the shelf-life and quality of dairy products. Chitosan-based biosensors offer precise contaminant detection in the milk industry by enabling precise detection of contaminants such as Bisphenol A, melamine, bacteria, drugs, antibiotics, toxins, heavy metals, and allergens, thus ensuring food safety and quality. Emerging trends, including the integration of artificial intelligence, advanced gene editing, and multifunctional chitosan, are discussed, offering insights into future personalized delivery systems and merging food and drug technologies. The review concludes by highlighting gaps in current research and offering recommendations for future exploration. These suggestions aim to optimize chitosan's unique properties to address key challenges in the milk industry. This article serves as a valuable resource for researchers, industry professionals, and policymakers aiming to innovate within the dairy sector using chitosan-based technologies.

Fabrication of edible nanocellulose chitosan bi-component film based on a novel "swell-permeate" approach

The fabrication of multi-component film with colloidal particles could be inconvenient. A novel "swell-permeate" (SP) strategy was proposed to form homogeneous multi-component films. The SP strategy allows colloidal particles to fit into the polymer network by stretching the polymer chains assisted by water. We demonstrated the strategy by creating films with polysaccharide substrates as β-cyclodextrin grafted chitosan (CS) with nanocellulose. The addition of nanocellulose significantly increased the mechanical properties and the barrier performance of the films. The size of nanocellulose particles in affecting mechanical properties was investigated by applying different length of cellulose nanocrystal (CNC), the longer of which, due to denser physical entanglements, showed a better increase to the film in the elastic modulus and tensile strength to 4.54-fold and 5.71-fold, respectively. The films were also loaded with ethyl-p-coumarate (EpCA) and had an enhanced performance in anti-microbial for Altenaria alternata, Salmonella typhi, and Escherichia coli. The anti-oxidative property was increased as well, and both effects were valid both in vitro and in ready-to-eat apples. The strategy provides a practical and convenient method for fabricating colloidal particle containing films, and the novel idea of "swell-permeate" is potentially regarded as a new solution to the challenge of ready-to-eat food quality maintenance.

Recent advances in modifications, biotechnology, and biomedical applications of chitosan-based materials: A review

Chitosan, a natural polysaccharide with recognized biocompatibility, non-toxicity, and cost-effectiveness, is primarily sourced from crustacean exoskeletons. Its inherent limitations such as poor water solubility, low thermal stability, and inadequate mechanical strength have hindered its widespread application. However, through modifications, chitosan can exhibit enhanced properties such as water solubility, antibacterial and antioxidant activities, adsorption capacity, and film-forming ability, opening up avenues for diverse applications. Despite these advancements, realizing the full potential of modified chitosan remains a challenge across various fields. The purpose of this review article is to conduct a comprehensive evaluation of the chemical modification techniques of chitosan and their applications in biotechnology and biomedical fields. It aims to overcome the inherent limitations of chitosan, such as low water solubility, poor thermal stability, and inadequate mechanical strength, thereby expanding its application potential across various domains. This review is structured into two main sections. The first part delves into the latest chemical modification techniques for chitosan derivatives, encompassing quaternization, Schiff base formation, acylation, carboxylation, and alkylation reactions. The second part provides an overview of the applications of chitosan and its derivatives in biotechnology and biomedicine, spanning areas such as wastewater treatment, the textile and food industries, agriculture, antibacterial and antiviral activities, drug delivery systems, wound dressings, dental materials, and tissue engineering. Additionally, the review discusses the challenges associated with these modifications and offers insights into potential future developments in chitosan-based materials. This review is anticipated to offer theoretical insights and practical guidance to scientists engaged in biotechnology and biomedical research.

Formulation and optimization of surfactant-modified chitosan nanoparticles loaded with cefdinir for novel topical drug delivery: Elevating wound healing efficacy with enhanced antibacterial properties

Burn wounds remain a significant global health concern, frequently exacerbated by bacterial infections that hinder healing and raise morbidity rates. Cefdinir, a third-generation cephalosporin antibiotic, is used to treat various conditions, but it has limitations such as low water solubility, limited bioavailability, and a short biological half-life. This study aimed to fabricate and optimize novel surfactant-based Cefdinir-loaded chitosan nanoparticles (CFD-CSNPs) for enhancing topical CFD delivery and efficacy in burn healing. Box-Behnken Design (BBD) was employed to develop optimized CFD-CSNPs using Design Expert® software, where the independent factors were chitosan concentration, chitosan: sodium tripolyphosphate ratio, pH, and surfactant type. Particle size PS, zeta potential ZP, Polydispersity index PDI, and entrapment efficiency EE% were evaluated as dependent factors. CFD-CSNPs were produced using the ionic gelation method. The optimized formula was determined and then examined for further in vitro and in vivo assessments. The optimized CFD-CSNPs exhibited acceptable PS, PDI, and ZP values. The EE% of CFD from CSNPs reached 57.89 % ± 1.66. TEM analysis revealed spherical morphology. In vitro release studies demonstrated a biphasic release profile up to (75.5 % ± 3.8) over 48 hrs. The optimized CFD-CSNPs showed improved antimicrobial efficacy against the tested microorganisms, exhibiting superior performance for both biofilm prevention and eradication. Enhanced wound healing activity was achieved by the optimized CFD-CSNPs in both in vitro and in vivo studies as confirmed by scratch wound assay and skin burn mice model. The current study advocates the efficacy of the innovative topical application of CFD-CSNPs for wound healing purposes and treatment of wound infections.

Functional potential of chitosan-metal nanostructures: Recent developments and applications

Chitosan (Cs), a naturally occurring biopolymer, has garnered significant interest due to its inherent biocompatibility, biodegradability, and minimal toxicity. This study investigates the effectiveness of various reaction strategies, including acylation, acetylation, and carboxymethylation, to enhance the solubility profile of Cs. This review provides a detailed examination of the rapidly developing field of Cs-based metal complexes and nanoparticles. It delves into the diverse synthesis methodologies employed for their fabrication, specifically focusing on ionic gelation and in-situ reduction techniques. Furthermore, the review offers a comprehensive analysis of the characterization techniques utilized to elucidate the physicochemical properties of these complexes. A range of analytical techniques are utilized, including Ultraviolet-Visible Spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and others. By comprehensively exploring a wide range of applications, the review emphasizes the significant potential of Cs in various scientific disciplines. Diagrams, figures, and tables effectively illustrate the synthesis processes, promoting a clear understanding for the reader. Chitosan-metal nanostructures/nanocomposites significantly enhance antimicrobial efficacy, drug delivery, and environmental remediation compared to standard chitosan composites. The integration of metal nanoparticles, such as silver or gold, improves chitosan's effectiveness against a range of pathogens, including resistant bacteria. These nanocomposites facilitate targeted drug delivery and controlled release, boosting therapeutic bioavailability. Additionally, they enhance chitosan's ability to absorb heavy metals and dyes from wastewater, making them effective for environmental applications. Overall, chitosan-metal nanocomposites leverage chitosan's biocompatibility while offering improved functionalities, making them promising materials for diverse applications. This paper sheds light on recent advancements in the applications of Cs metal complexes for various purposes, including cancer treatment, drug delivery enhancement, and the prevention of bacterial and fungal infections.

Synthesis, characterization, and application of films made from highly substituted N-perfluoroacylated chitosan

Highly substituted perfluoroacylated chitosan can alter the physicochemical properties of chitosan; however, the currently synthesized perfluoroacylated chitosan has a low degree of substitution. In this study, we present a simple method for the homogeneous preparation of highly substituted N-perfluoroacylated chitosan, conducted at room temperature without requiring strict anhydrous or oxygen-free conditions. Various perfluorocarbon chains were successfully attached to chitosan through a reaction between perfluorinated acid esters and amines, catalyzed by DBU. The synthesized N-perfluoroacylated chitosan, with high degree of substitution, demonstrated excellent solubility in common organic solvents. Comprehensive characterization was performed using elemental analysis, nuclear magnetic resonance (including two-dimensional NMR), gel permeation chromatography, infrared spectroscopy, X-ray diffraction, and thermal analysis. The resulting films exhibited high water contact angles. Notably, as the fluorocarbon chain length increased, tensile strength gradually decreased, while elongation at break improved. Additionally, water uptake, water vapor transmission rate, and oxygen transmission rate all exhibited a declining trend. The films exhibited good biocompatibility, and in the grape preservation experiment, HFBC treatment effectively delayed grape aging and deterioration while enhancing quality preservation. These results suggest that HFBC film holds promising potential for food packaging applications.

Chitosan-Based Hydrogels as Antibacterial/Antioxidant/Anti-Inflammation Multifunctional Dressings for Chronic Wound Healing

Due to repeated microbial infection, persistent inflammation, excessive oxidative stress, and cell dysfunction, chronic wounds are difficult to heal, posing a serious threat to public health. Therefore, developing multifunctional wound dressings that can regulate the complex microenvironment of chronic wounds and enhance cellular function holds great significance. Recently, chitosan has emerged as a promising biopolymer for wound healing due to its excellent biocompatibility, biodegradability, and versatile bioactivity. The aim of this review is to provide a comprehensive understanding of the mechanisms of delayed chronic wound healing and discuss the healing-promoting properties of chitosan and its derivatives, such as good biocompatibility, antibacterial activity, hemostatic capacity, and the ability to promote tissue regeneration. On this basis, the potential applications of chitosan-based hydrogels are summarized in chronic wound healing, including providing a suitable microenvironment, eliminating bacterial infections, promoting hemostasis, inhibiting chronic inflammation, alleviating oxidative stress, and promoting tissue regeneration. In addition, the concerns and perspectives for the clinical application of chitosan-based hydrogels are also discussed.

Research progress and application of chitosan dressings in hemostasis: A review

Hemorrhage affects human health, and severe bleeding remains a leading contributor to trauma-related mortality. The speed and effectiveness of the application of hemostatic materials are critical. Conventional hemostatic dressings such as bandages and gauze are gradually being replaced by new types of hemostatic dressings due to their poor hemostatic and antibacterial properties. Chitosan, a biopolymer, is biodegradable and nontoxic and possesses hemostatic and antibacterial properties. Chitosan induces hemostasis through direct contact with red corpuscles and platelets, independent of the coagulation pathways of the host, rendering it an optimal hemostatic dressing. It is widely used in wound care, particularly to stop bleeding, promote wound healing, and provide antimicrobial properties. This article reviews the recent research and development of chitosan-based hemostatic dressings, focusing on trauma hemostasis, burn hemostasis, diabetic skin ulcer hemostasis and other aspects. It also emphasizes the significance of chitosan dressings in wound hemostasis and healing, identifies their research opportunities in hemostasis and wound healing, and explores new research directions.

Fluorescent antimicrobial hydrogel based on fluorophore N-doped carbon dots originated from cellulose nanocrystals

The current study represents a unique fabrication strategy for preparation of fluorescent hydrogels via incorporation of fluorescent quantum dots (QDs) as fluorophore entities into chitosan as a gelling matrix. QDs identified as carbon quantum dots (CQDs) & nitrogen containing carbon quantum dots (NCQDs) were preliminary synthesized from cellulose nanocrystals (CNCs) and cationic cellulose nanocrystals (CCNCs), respectively. Cationic CNCs was prepared via chemical grafting with poly-di-allyl dimethyl ammonium chloride (CNCs-g-poly-DADMAC) through free chain polymerization reaction. Additionally, both of the prepared CQDs & NCQDs were impregnated in 3D interpenetrating network of chitosan for preparation of microbicide/florescent hydrogels (CQDs@Chs hydrogel & NCQDs@Chs hydrogel). The represented data revealed that, exploitation of cationic CNCs resulted in preparation of NCQDs with more controllable size and superior photoluminescence. Moreover, the increment in concentration of CNCs reflected in nucleation of enlarged QDs, at variance of CCNCs, whereas, increment of concentration resulted in significantly smaller-sized QDs. Size distribution of CQDs ingrained from 2% CNCs was estimated to be 8.2 nm, while, NCQDs ingrained from 2% CCNCs exhibited with size distribution of 3.8 nm. The prepared florescent CQDs@Chs hydrogel & NCQDs@Chs hydrogel showed excellent antimicrobial performance and the diameter of inhibition zone was estimated to be 31 mm, 26 mm & 22 mm against E. Coli, S. Aureus & C. Albicans with CQDs@Chs, respectively. Whereas, treatment of the as-mentioned microbial strains with NCQDs@Chs resulted in detection of inhibition zone diameter to be significantly higher as 34 mm, 28 mm & 25 mm for E. Coli, S. Aureus & C. Albicans, respectively. In a conclusion, cationic CNCs showed seniority in nucleation of QDs with significantly higher photoluminescence and microbicide activities.

Multi-Lasso Peptide-Based Synergistic Nanocomposite: A High-Stability, Broad-Spectrum Antimicrobial Agent with Potential for Combined Antibacterial Therapy

Lasso peptides, natural biological microcins composed of small molecules, have demonstrated efficient bactericidal activity. However, a single lasso peptide is characterized by a narrow and targeted bactericidal spectrum. In this study, a chitosan (CN) derivative-based polymer nanomaterial incorporating three lasso peptides (MccY, MccJ25, and Klebsidin) was designed and synthesized to broaden its antimicrobial spectrum. To enhance resistance to acid and alkali conditions, arginine was appended to the terminus of conjugates, resulting in Chitosan-Lasso-Peptides-Arg (CN-LPs-Arg), and the nanomaterial biocompatibility and bactericidal activity were characterized. Chemical stability test results demonstrate that CN-LPs-Arg effectively buffered the acid-base effect of the compound. Notably, CN-LPs-Arg extended the antimicrobial spectrum of Gram-negative and Gram-positive strains including Klebsiella, Salmonella, and Staphylococcus (MIC = 0.01-1.0 μM). CN-LPs-Arg exerts its destructive effects on bacteria via a series of mechanisms; it adheres to and then penetrates the membrane, causes rupture, and leads to bacterial death. Transcriptomic data revealed that CN-LPs-Arg produced a distinct inhibitory effect on ribosomal protein subunits synthesis pathways and membrane metabolic inhibition. Furthermore, CN-LPs-Arg was nontoxic to cells and exhibited excellent biocompatibility. CN-LPs-Arg reduced bacterial burden in organs and the levels of inflammatory factors IL-6, IL-8, and TNF-α in tissues of mice with acute bacterial infections. Furthermore, it promoted the recovery of Klebsiella-infected C57BL/6 mice, demonstrating a favorable therapeutic effect in vivo. The multilasso peptide-based synergistic nanocomposite of CN-LPs-Arg exhibited high stability as a broad-spectrum antimicrobial agent with potential for combined antibacterial therapy and utilization in the fields of food, biomedicine, and public health.

Biologically active ionic chitosan Schiff base nanocomposites: Synthesis, characterization and antimicrobial activity against Helicobacter pylori

1-(2-((4-Bromophenyl)amino)-2-oxoethyl)pyridin-1-ium chloride Schiff base (CH-Py) was prepared via reacting (CH) with pyridine-3-carboxaldehyde, followed by reacting the product with N-(4-bromophenyl)-2-chloroacetamide. The structure of the resulting CH derivative was determined via1HNMR and FTIR. The CH-Py derivative was converted into nanoparticles (CH-Py-Cl NPs) using sodium tripolyphosphate (TPP). Additionally, the nanocomposites (CH-Py-Cl NPs) were prepared discretely by dispersion of 3.0 % Se and 3.0 % Fe2O3 nanoparticles into the CH-Py-Cl NPs matrix to derive the products denoted as CH-Py-Cl/Se and CH-Py-Cl/Fe, respectively aiming to develop innovative effective chitosan Schiff base nanocomposites towards H. pylori. Anti-H. pylori activity of CH-Py-Cl NPs, CH-Py-Cl/Fe, and CH-Py-Cl/Se were found to be at a minimal inhibitory concentrations MIC value of 62.5, 31.25, and 15.62 μg/mL, indicating that CH-Py-Cl/Se possessed the highest biological activity in our investigation. Finally, the CH-Py-Se-NPs nanocomposite was examined for its in vitro cytotoxicity against colon cancer cell lines (Caco-2). The results obtained indicated that the developed CH-Py-Cl/Se showed toxic effects on Caco-2 cells, with an IC50 value of 124.52 ± 1.15 μg/mL.

Interaction between reacetylated chitosan and albumin in alcalescent media

Interaction of chitosan and its derivatives with proteins of animal blood at blood pH relevant conditions is of a particular interest for construction of antimicrobial chitosan/protein-based drug delivery systems. In this work, the interaction of a series of N-reacetylated oligochitosans (RA-CHI) having Mw of 10-12 kDa and differing in the degree of acetylation (DA 19, 24, and 40 %) with bovine serum albumin (BSA) in alkalescent media is described in first. It is shown that RA-CHI forms soluble complexes with BSA in solutions with pH 7.4 and a low ionic strength. Light scattering study shows that soluble RA-CHI complexes have spherical form with the radius of about 100 nm. Circular dichroism, fluorescent spectroscopy, and micro-IR spectroscopy studies show that the secondary structure of BSA in soluble complexes remain intact. Isothermal titration calorimetry of RA-CHI with DA 24 % and BSA mixing in the buffers with different ionization heats reveals a significant contribution of electrostatic forces to the binding process and an additional ionization of chitosan due to the proton transfer from the buffer substance. An increase of ionic strength to the blood relevant value 0.15 M suppresses the binding. It is shown that application of RA-CHI with higher DA value leads to a decrease in the affinity of RA-CHI to BSA and an alteration of the interaction mechanism. The finding opens an opportunity to the application of N-reacetylated chitosan derivatives in the complex systems compatible with blood plasma proteins.

Cotton-like antibacterial polyacrylonitrile nanofiber-reinforced chitosan scaffold: Physicochemical, mechanical, antibacterial, and MC3T3-E1 cell viability study

Bio-scaffolds, while mimicking the morphology of native tissue and demonstrating suitable mechanical strength, enhanced cell adhesion, proliferation, infiltration, and differentiation, are often prone to failure due to microbial infections. As a result, tissue engineers are seeking ideal scaffolds with antibacterial properties. In this study, silver nanoparticles (AgNPs) were integrated into cotton-like polyacrylonitrile nanofibers via a polydopamine (PDA) interlayer (Ag@p-PAN). These Ag@p-PAN nanofibers were then incorporated into the chitosan (CS) matrix, developing an antibacterial CS/Ag@p-PAN composite scaffold. The composite scaffold features an interconnected porous morphology with fiber-infused pore walls, improved water absorption and swelling properties, a controlled degradation profile, enhanced porosity, better mechanical strength, strong antibacterial properties, and excellent MC3T3-E1 cell viability, adhesion, proliferation, and infiltration. This study presents a novel method for reinforcing CS-based scaffolds by incorporating bioactive nanofibers, offering potential applications in tissue engineering and other biomedical fields.

Progress in chitin/chitosan and their derivatives for biomedical applications: Where we stand

Chitin and its deacetylated form, chitosan, have demonstrated remarkable versatility in the realm of biomaterials. Their exceptional biocompatibility, antibacterial properties, pro- and anticoagulant characteristics, robust antioxidant capacity, and anti-inflammatory potential make them highly sought-after in various applications. This review delves into the mechanisms underlying chitin/chitosan's biological activity and provides a comprehensive overview of their derivatives in fields such as tissue engineering, hemostasis, wound healing, drug delivery, and hemoperfusion. However, despite the wealth of studies on chitin/chitosan, there exists a notable trend of homogeneity in research, which could hinder the comprehensive development of these biomaterials. This review, taking a clinician's perspective, identifies current research gaps and medical challenges yet to be addressed, aiming to pave the way for a more sustainable future in chitin/chitosan research and application.

Tunicate cellulose nanocrystals strengthened injectable stretchable hydrogel as multi-responsive enhanced antibacterial wound dressing for promoting diabetic wound healing

The intricate microenvironment of diabetic wounds characterized by hyperglycemia, intense oxidative stress, persistent bacterial infection and complex pH fluctuations hinders the healing process. Herein, an injectable multifunctional hydrogel (QPTx) was developed, which exhibited excellent mechanical performance and triple responsiveness to pH, temperature, and glucose due to dynamic covalent cross-linking involving dynamic Schiff base bonds and phenylboronate esters with phenylboronic-modified quaternized chitosan (QCS-PBA), polydopamine coated tunicate cellulose crystals (PDAn@TCNCs) and polyvinyl alcohol (PVA). Furthermore, the hydrogels can incorporate insulin (INS) drugs to adapt to the complex and variable wound environment in diabetic patients for on-demand drug release that promote diabetic wound healing. Based on various excellent properties of the colloidal materials, the hydrogels were evaluated for self-healing, rheological and mechanical properties, in vitro insulin response to pH/temperature/glucose release, antibacterial, antioxidant, tissue adhesion, coagulation, hemostasis in vivo and in vitro, and biocompatibility and biodegradability. By introducing PDAn@TCNCs particles, the hydrogel has photothermal antibacterial activity, enhanced adhesion and oxidation resistance. We further demonstrated that these hydrogel dressings significantly improved the healing process compared to commercial dressings (Tegaderm™) in full-layer skin defect models. All indicated that the glucose-responsive QPTx hydrogel platform has great potential for treating diabetic wounds.

Green chitosan extraction from Hermetia illucens breeding waste (prepupal cases): Characterization and bioadsorption activity

Heavy metal contamination has harmful consequences for the ecosystem. They are naturally non-biodegradable, and can cause severe ecotoxicity and numerous pathologies. Several bioadsorbents have been used for metal pollution control, and chitosan is one of the biomaterials that has proven to be an efficient adsorbent. The aim of the present work is to exploit the rearing waste of Hermetia illucens (prepupal cases), commonly known as the Black Soldier Fly (BSF), to produce chitin and its derivative chitosan by microwave-assisted process, and to study the interaction of this biopolymer with zinc and cadmium. All the samples obtained were characterized by several methods, including FTIR, XRD, TGA/DSC, 1H NMR, SEM, and viscosimetric studies. The chitosan obtained has interesting physicochemical properties with an acetylation degree (DA) equal to 2.3 %, Molecular weight (Mv) equal to 155 kDa, and a crystallinity index (ICr) around 51.26 %. Chitosan was also found to have an adsorption capacity of Cd and Zn around 141.05 mg·g-1 and 45 mg·g-1 respectively by absorption atomic spectroscopy (AAS). Results confirm the effectiveness of chitosan derived from BSF, obtained through an eco-friendly method, as a sustainable and efficient bioadsorbent for addressing heavy metal contamination.

Novel chitosan-based hydrogels as promising wound dressing materials with advanced properties

Herein, four different grafted chitosans were synthesized by covalent attachment of glycine, L-arginine, L-glutamic acid, or L-cysteine to the chitosan chains. All products were subsequently permethylated to obtain their corresponding quaternary ammonium salts to enhance the inherent antimicrobial properties of native chitosan. In all cases, transparent hydrogels with the following remarkable characteristics were obtained: i) high-water absorption capacity (32-44 g H2O per g of polymer), ii) viscoelastic behavior at low deformations, iii) flexibility when subjected to deformations and iv) stability over long time scales. All the permethylated derivatives successfully inhibited 100 % of the growth of S. aureus. They also exhibited higher antimicrobial activity against E. coli than native chitosan. The structure of the chemically crosslinked products was more stable under external perturbations than that of the physically crosslinked ones. Between the chemically crosslinked products, the permethylated glutamic acid-grafted chitosan exhibited a noteworthy higher water absorption capacity with respect to that modified with cysteine, which makes it the most promising material for various industrial applications, including biomedical and food industries. Regarding biomedical applications, this derivative met the required physicochemical criteria for wound dressings, which encourages the pursuit of biological studies necessary to ensure the safety of its use for this application.

Caspofungin formulations for buccal and sublingual mucosae anti-fungal infections: physicochemical characterization, rheological analysis, release and ex vivo permeability profiles

AIM

Oral candidiasis is often challenging due to limited effectiveness of topical treatments. This study aimed to develop novel caspofungin formulations for administration onto the oral mucosa to enhance drug retention and efficacy.

METHOD

Five caspofungin (2%, w/v) formulations were developed to assess their permeability, retention and mucoadhesiveness. Ex vivo permeability assays were performed on buccal and sublingual mucosae, and histological analyses conducted to evaluate tissue tolerance.

RESULTS

Formulation composed of chitosan demonstrated the highest retention in both buccal (5183.24 ± 587.32 µg/cm2) and sublingual (1090.72 ± 110.26 µg/cm2) mucosae. Other formulations exhibited significantly lower retention, ranging from 7.53 ± 0.81 to 1852.10 ± 193.24 µg/cm2 in buccal mucosa and 1.64 ± 0.14 to 317.74 ± 31.78 µg/cm2 in sublingual mucosa. Chitosan-based formulation exhibited the highest mucoadhesive strength, with values of 5179.05 ± 31.99 mN/cm2 for buccal and 7026.10 ± 123.41 mN/cm2 for sublingual mucosae, and also superior extensibility, which facilitates application in the oral cavity. All formulations showed antifungal activity against Candida spp., and histological analyses revealed minor epithelial alterations.

CONCLUSION

The developed formulations offer distinct advantages for treating oral candidiasis, with chitosan formulation emerging as the most promising due to its superior retention, mucoadhesion force, and spreadability, making it a potential candidate for further clinical investigation.

Biocompatible Pickering emulsions and films: Unlocking the chitosan-polyvinyl alcohol synergy for multifaceted capabilities

The exciting potential of harnessing the synergy between polysaccharides and bioactive components is attracting significant scientific interest. This research paves the way for the development of novel materials that can improve human health. Therefore, current research is conducted to explore the innovative use of chitosan, polyvinyl alcohol (PVA) complex (CHN-PVA), olive oil-stabilized Pickering emulsions (PEs), and films with multifaceted applications. The sonication stabilized Pickering emulsions (PEs at different pH values 3, 5, 7, 9, and 11) exhibited decrease in particle size compared to control PEs. The pH significantly impacted the zeta potential of PEs. Fourier-transform infrared spectroscopy (FTIR) confirmed the non-covalent linkages. The antibacterial activity of the PEs revealed greater efficacy against gram-positive bacteria than gram-negative bacteria. The CHN-PVA synergy greatly impacted the mechanical properties of films, resulting in tremendous increase of tensile strength and elongation at break compared to CHN film. The PEs efficiently delivered quercetin at neutral pH. The electro spraying of PEs significantly extended strawberry shelf life. Finally, the films exhibited promising properties of adsorbent and the results depicted that pH had a significant impact on methylene blue removal. Conclusively, this investigation underscores the potential of CHN-PVA films in food, health, and environmental fields.

CO2-switchable emulsion with controllable stability and viscosity based on chitosans and cetyltrimethylammonium bromide

Emulsions have extensive applications in food, cosmetics, and agriculture, while the requirements for emulsions differ in various fields. It is a challenge for one emulsion to satisfy multiple requirements in different applications. Herein, CO2-switchable emulsions with controllable stability and viscosity were prepared by a mixture of chitosans (CS) and CTAB. After adding low concentrations of CTAB (e.g. 0.5 mM), the viscous Pickering emulsions stabilized by CS alone were converted into moderate-viscous Pickering emulsions due to the competition adsorption between CS aggregates and CTAB at the oil-water interface. The transformation of emulsion types (such as Pickering and conventional emulsions) and the emulsion's stability and viscosity were controlled by CO2/N2 trigger. Furthermore, at high CTAB concentrations (≥ 0.8 mM), a novel long-term stable conventional emulsion was obtained after the CS aggregates at the oil-water interface were entirely replaced by CTAB. Compared with other stimuli, CO2 is recognized as a green trigger that doesn't cause contaminations in the system, which has potential applications in organic synthesis and polymerization. Our strategy provides a simple and effective method to smartly control the properties of the emulsions (such as the emulsion type, stability, and viscosity), obtaining an intelligent emulsion to meet different requirements in many applications.

Enhancement of antibacterial activity in electrospun fibrous membranes based on quaternized chitosan with caffeic acid and berberine chloride for wound dressing applications

Electrospun nanofibers made from chitosan are promising materials for surgical wound dressings due to their non-toxicity and biocompatibility. However, the antibacterial activity of chitosan is limited by its poor water solubility under physiological conditions. This study addresses this issue by producing electrospun nanofibers mainly from natural compounds, including chitosan and quaternized chitosan, which enhance both its solubility for electrospinning and the antibacterial activity of the resulting electrospun nanofibers. Additionally, antimicrobial agents like caffeic acid or berberine chloride were incorporated. The glutaraldehyde-treated nanofibers showed improved mechanical properties, with an average tensile strength exceeding 2.7 MPa, comparable to other chitosan-based wound dressings. They also demonstrated enhanced water stability, retaining over 50% of their original weight after one week in phosphate-buffered saline (PBS) at 37 °C. The morphology and performance of these nanofibers were thoroughly examined and discussed. Furthermore, these membranes displayed rapid drug release, indicating potential for inhibiting bacterial growth. Antibacterial assays revealed that S2-CX nanofibers containing caffeic acid were most effective against E. coli and S. aureus, reducing their survival rates to nearly 0%. Similarly, berberine chloride-containing S4-BX nanofibers reduced the survival rates of E. coli and S. aureus to 19.82% and 0%, respectively. These findings suggest that electrospun membranes incorporating chitosan and caffeic acid hold significant potential for use in antibacterial wound dressings and drug delivery applications.

Novel antibacterial pullulan derivatives modified with quaternary phosphonium salts for infected wound treatments

The development of novel antibacterial agents is urgently needed to tackle bacterial infection, the major global issue menacing human health. Among them, polymeric quaternary phosphonium salts are worth noticing owing to their strong antibacterial activities and other merits including low bacterial drug resistance. Herein, pullulan modified with quaternary phosphonium salts (PQP) was synthesized using esterification reactions of pullulan and (5-carboxypentyl)triphenylphosphonium bromide (CPTPPB) mediated by N,N'‑carbonyldiimidazole (CDI), and was evaluated as novel antibacterial agents for treating wound infection for the first time. The chemical structures, chemical bonding, elemental compositions, crystalline properties and thermostability of PQP were systematically investigated. PQP exhibited in vitro antibacterial activities against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), which were unveiled by the spread plate method and possibly resulted from the damage of bacterial cell walls/membranes mediated by electrostatic and hydrophobic interactions according to preliminary mechanism studies. Weak cytotoxicity and excellent hemocompatibility of PQP at the effective bactericidal concentration were observed. Moreover, in the infected wound model of mice, PQP was capable of disinfecting the wound and accelerating the healing. We opine PQP in this work is promising for antibacterial applications and will inspire the synthesis of novel antibacterial agents derived from natural polymers.

Dual Antimicrobial Activity of HTCC and Its Nanoparticles: A Synergistic Approach for Antibacterial and Antiviral Applications Through Combined In Silico and In Vitro Studies

N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC), a quaternized chitosan derivative, has been shown to exhibit a broad spectrum of antimicrobial activity, especially against bacteria and enveloped viruses. Despite this, molecular docking studies showing its atomic-level mechanisms against these microorganisms are scarce. Here, for the first time, we employed molecular docking analyses to investigate the potential antibacterial activity of HTCC against Staphylococcus aureus and its antiviral activity against human immunodeficiency virus 1 (HIV-1). According to the findings, HTCC exhibited promising antibacterial activity with high binding affinities; however, it had limited antiviral activity. To validate these theoretical outcomes, experimental studies were conducted. Different derivatives of HTCC were synthesized and characterized using NMR, XRD, FTIR, and DLS. The in vitro assays validated the potent antibacterial efficacy of HTCC against S. aureus, whereas the antiviral studies did not show good antiviral activity. However, our research also revealed a promising avenue for further exploration of the antimicrobial activity of HTCC nanoparticles (NPs), since, thus far, no studies have been conducted to show the antiviral activity of HTCC NPs against HIV-1. The nanosized HTCC exhibited superior antiviral performance compared to the parent polymers, with complete (100%) inhibition of HIV-1 viral activity at the highest tested concentration (0.33 mg/mL).

Novel Encapsulation Approaches in the Functional Food Industry: With a Focus on Probiotic Cells and Bioactive Compounds

Bioactive substances can enhance host health by modulating biological reactions, but their absorption and utilization by the body are crucial for positive effects. Encapsulation of probiotics is rapidly advancing in food science, with new approaches such as 3D printing, spray-drying, microfluidics, and cryomilling. Co-encapsulation with bioactives presents a cost-effective and successful approach to delivering probiotic components to specific colon areas, improving viability and bioactivity. However, the exact method by which bioactive chemicals enhance probiotic survivability remains uncertain. Co-crystallization as an emerging encapsulation method improves the physical characteristics of active components. It transforms the structure of sucrose into uneven agglomerated crystals, creating a porous network to protect active ingredients. Likewise, electrohydrodynamic techniques are used to generate fibers with diverse properties, protecting bioactive compounds from harsh circumstances at ambient temperature. Electrohydrodynamic procedures are highly adaptable, uncomplicated, and easily expandable, resulting in enhanced product quality and functionality across various food domains. Furthermore, food byproducts offer nutritional benefits and technical potential, aligning with circular economy principles to minimize environmental impact and promote economic growth. Hence, industrialized nations can capitalize on the growing demand for functional foods by incorporating these developments into their traditional cuisine and partnering with businesses to enhance manufacturing and production processes.

Overcoming resistance: Chitosan-modified liposomes as targeted drug carriers in the fight against multidrug resistant bacteria-a review

Antimicrobial resistance (AMR) poses a significant global health threat, rendering standard antibiotics ineffective against multi-drug resistant bacteria. To tackle this urgent issue, innovative approaches are essential. Liposomes, small spherical vesicles made of a phospholipid bilayer, present a promising solution. These vesicles can encapsulate various medicines and are both biocompatible and biodegradable. Their ability to be modified for targeted tissue or cell uptake makes them an ideal drug delivery system. By delivering antibiotics directly to infection sites, liposomes minimize side effects and reduce the development of resistance. However, challenges such as poor stability and rapid drug leakage limit their biological application. Chitosan, a biocompatible polymer, enhances liposome interaction with specific tissues or cells, enabling selective drug release at infection sites. Incorporating chitosan into liposome formulations alters and diversifies their surface characteristics through electrostatic interactions, resulting in improved stability and pH-sensitive drug release. These interactions are crucial for enhancing drug retention and targeted delivery, especially in varying pH environments like tumor sites or infection areas, thereby improving therapeutic outcomes and reducing systemic side effects. This review discusses recent advancements, challenges, and the need for further research to optimize liposome formulations and enhance targeted drug delivery for effective AMR treatment. Chitosan-modified liposomes offer a promising strategy to overcome AMR and improve antimicrobial therapies.

Chitosan-based hydrogels: Influence of crosslinking strategy on rheological properties

The effect of two crosslink strategies on the preparation of chitosan-based covalent hydrogels was investigated employing the widely used thiol-ene reaction. This versatile "click" chemistry can be activated either photochemically or thermochemically. Initially, well-purified chitosan (CS, DA ∼4 %, Mw ∼580 kg mol-1) was separately functionalized with vinyl (CS-ene) or thiol (CS-SH) groups in aqueous media. Subsequently, two strategies were compared where thiol-ene reaction occurs respectively between: (S1) modified chitosans CS-ene and CS-SH, in a polymer - polymer strategy, and (S2) CS-ene and di(ethylene glycol) dithiol (dEG-(SH)2), in a polymer - molecule strategy. Both crosslinking strategies were evaluated through rheological measurements, starting with entangled chitosan solutions. The difference in diffusion of functional groups, whether attached to polymer chains or to free molecules, leads to faster gelation kinetics with S2. Consequently, stronger gels were obtained with S2, where the modulus was connected with the degree of functionalization, while S1 produced weaker gels closer to the percolation point, where crosslinked density was associated with the entanglement number derived from the initial concentration. Nevertheless, networks formed by both strategies were homogenous with minimal dissipative contributions to their rheological properties, indicating that structural defects are negligible.

Applications of Chitosan in Prevention and Treatment Strategies of Infectious Diseases

Chitosan is the most commonly investigated functional cationic biopolymer in a wide range of medical applications due to its promising properties such as biocompatibility, biodegradability, and bioadhesivity, as well as its numerous bioactive properties. Within the last three decades, chitosan and its derivatives have been investigated as biomaterials for drug and vaccine delivery systems, besides for their bioactive properties. Due to the functional groups in its structure, it is possible to tailor the delivery systems with desired properties. There has been a great interest in the application of chitosan-based systems also for the prevention and treatment of infectious diseases, specifically due to their antimicrobial, antiviral, and immunostimulatory effects. In this review, recent applications of chitosan in the prevention and treatment of infectious diseases are reviewed, and possibilities and limitations with regards to technical and regulatory aspects are discussed. Finally, the future perspectives on utilization of chitosan as a biomaterial are discussed.

In vivo evaluation by oral administration of chitosan combined with bioactive glass against cadmium-induced toxicity in rats

Bioactive glass and chitosan are biomaterials widely used for orthopedic applications, notably as bone grafts. Although these biomaterials show promising therapeutic properties, no research has yet examined their potential for oral administration in soft tissue protection, particularly against metal toxicity. The aim of our study was to evaluate the potential of chitosan from cuttlefish (CHS) bone combined with bioactive glass (BG) against Cadmium-induced toxicity in rats. Cadmium (Cd), a heavy metal that accumulates in tissues, causes various disorders. Experiments were carried out on rats intoxicated acutely by oral administration of Cd (20 mg/kg body weight) and/or concomitantly with oral administration of CHS/BG (100 mg/kg body weight) for 7 days. Using pathophysiological and biochemical tests, we evaluated the detoxifying effect of orally administered CHS/BG against Cd toxicity. Our results showed, for the first time, a significant detoxifying effect of CHS/BG against Cd-induced toxicity in rats. Treatment with CHS/BG protected rats against the harmful effects of Cd by reducing lipid peroxidation levels and enhancing antioxidant enzyme activities. In addition, it helped restore phosphocalcic balance and protect liver, kidney and brain function. Remarkably, it also reduced Cd levels in the liver, kidneys and brain, as well as in the bones of rats. These results show that oral administration of CHS/BG has a strong therapeutic potential on tissues through detoxification of cadmium-exposed rats.

Applications of chitosan in the agri-food sector: A review

Chitosan is a natural and renewable polysaccharide that can form biopolymers. It is derived from the deacetylation of chitin mainly from crustaceans' shells, but also from fungi and insects. Thanks to unique characteristics such as antimicrobial effects, antioxidant properties or film forming capacities, it has triggered an important amount of research in the last decade about possible applications in industrial fields. The main application field of chitosan is the food industry where it can be used for preservation purposes and shelf-life improvement for fresh food products such as fruits or meat. For beverages, it is used for clarification and fining as well as elimination of spoilage flora in beverages like fruit juices or wine. And in agriculture, it can be used as a plant protection product through different mechanisms like the elicitation of plant defences. The mechanisms of action of chitosan on microorganisms are multiple and complex but revolve mostly around the disturbance of microorganisms' membranes and cell walls resulting in the leakage of cell material. The use of chitosan is still minor but is promising in finding environmentally friendly alternatives to synthetic chemicals and plastics. Therefore, its characterization is primordial for the future of sustainable production and preservation processes.

Synthesis and characterization of new electrospun medical scaffold-based modified cellulose nanofiber and bioactive natural propolis for potential wound dressing applications

Recently, the design of polymer nanofibers using the electrospinning process has attracted much interest. Particularly the use of natural polymers has promoted many advantages in their biomedical applications. However, the combination of multiple natural polymers remains a great challenge in terms of electrospun production and applied performance. From this perspective, the current investigation highlights the study of the preparation of electrospun nanomaterial scaffolds based on combined natural polymers for improved wound healing performance. First, we have synthesized a crosslinked polymer by reacting microcrystalline cellulose (MC) and chitosan (CS) biopolymer via the intermediate of citric acid as a crosslinking agent. Then a natural propolis biomolecule was incorporated into the polymer network. Different MC/CS blend ratios of 90/10 and 70/30 were then used and various machine parameters were optimized to obtain nanofiber scaffolds with excellent strength and structures. SEM, IR, physicochemical, mechanical, and morpho-logical characterization were then performed. SEM evaluation revealed homogeneous and bead-free nanofibrous structures, with well-defined morphology and a random deposition that could accurately mimic the extracellular matrix of native skin. The calculated average nanofiber diameters for the MC/CS blend ratios at 90/10 and 70/30 were 431.4 and 441.2 nm, respectively. The results showed that when the chitosan amount increased, larger nanofibers with narrow diameter distribution appeared. The prepared nanomaterials had a significant and close water vapor permeability of about 1735.12 and 1698.52 g per m per day for the two blend ratios of 90/10 and 70/30, respectively. The examination of swelling behavior revealed a noteworthy enhancement in hydrophilicity, a necessary attribute for improved healing efficacy. FT-IR analysis confirmed the success and the stability of the chemical crosslinking reaction between the two biopolymers before nanofiber conception. Excellent mechanical properties were acquired, based on the chitosan content. Both developed nanofiber scaffolds exhibited high tensile strength and Young's modulus values. The incorporation of 30% chitosan versus 10% results in an increase in tensile strength of 11% and 14% in Young's modulus. Therefore, we could adjust the different mechanical properties simply by varying the mixing rate of the electrospun polymers. Using epithelial HepG2 cells, viability and kinetic cell adhesion assays were assessed to obtain biological evaluation. No cytotoxicity was observed and good cytocompatibility was confirmed. Functionalized nanofiber biomaterials with different MC/CS ratios substantiated significant bactericidal effectiveness against Gram-positive and Gram-negative bacterial culture strains. The novel functional electrospun wound dressing scaffold demonstrated effective and promising biomedical performance, healing both acute and chronic wounds.

Synthesis and unambiguous NMR characterization of linear and branched N-alkyl chitosan derivatives

Chitosan, sourced from abundant chitin-rich waste streams, emerges as a promising candidate in the realm of future functional materials and chemicals. While showing numerous advantageous properties, chitosan sometimes falls short of competing with today's non-renewable alternatives. Chemical derivatization, particularly through N-alkylation, proves promising in enhancing hydrophobic functionalities. This study synthesizes fifteen chitosan derivatives (degree of substitution = 2-10 %) using an improved reductive amination method. Next, selective depolymerization through acid hydrolysis reduced the chain rigidity imposed by the polymer backbone. This facilitated unambiguous structural characterization of the synthesized compounds using a combination of common NMR techniques. Two potential side reactions are identified for the first time, emphasizing the need for detailed structural information to unlock the true potential of these derivatives in future applications. HYPOTHESIS: The increase in chain mobility induced by the selective depolymerization of aliphatic N-alkyl chitosan derivatives allows for an unambiguous NMR characterization.

Fatty acid-modified chitosan and nanoencapsulation of essential oils: A snapshot of applications

Chitosan (CS) and its modification with fatty acid (FA) in addition to the nanoencapsulation with essential oils (EOs) have emerged as promising approaches with diverse applications, particularly in food and fruit preservation. This review aims to curate data on the prospects of CS modified with FA as nanostructures, serving as carriers for EOs and its application in the preservation of fruits. A narrative review with no restricted period was used for the general overview of CS and strategies for its modification with FA. Report on CS modified with FA and nanoencapsulation with EO and their applications were appraised. The prospects of CS modified with FA and EO nanoencapsulation in food and fruit preservation were outlined. Most chitosan-fatty acid (CS-FA) studies have found relevance in water, medical and pharmaceutical industries, with few studies on food preservation. CS-FA formulation with EOs shows substantial potential in preserving fruits and will significantly impact the food industry in the future by extending the shelf life of fruits and reducing food waste.

The quantitative molecular weight-antimicrobial activity relationship for chitosan polymers, oligomers, and derivatives

Chitosan and chitosan derivatives can kill pathogenic microorganisms including bacteria and fungi. The antimicrobial activity is dependent on the degree of acetylation, substituent structure, and molecular weight. Over the past four decades, numerous studies have endeavored to elucidate the relationship between molecular weight and the activity against microorganisms. However, investigators have reported divergent and, at times, conflicting conclusions. Here a bilinear equation is proposed, delineating the relationship between antimicrobial activity, defined as log (1/MIC), and the molecular weight of chitosan and chitosan derivatives. Three constants AMin, AMax, and CMW govern the shape of the curve determined by the equation. The constant AMin denotes the minimal activity expected as the molecular weight tends towards zero while AMax represents the maximal activity observed for molecular weights exceeding CMW, the critical molecular weight required for max activity. This equation was applied to analyze data from seven studies conducted between 1984 and 2019, which reported MIC (Minimum Inhibitory Concentration) values against bacteria and fungi for various molecular weights of chitosan and its derivatives. All the 29 datasets exhibited a good fit (R2 ≥ 0.5) and half excellent (R2 ≥ 0.95) fit to the equation. The CMW generally ranged from 4 to 10 KD for datasets with an excellent fit to the equation.

Antioxidative, Anti-Inflammatory, Antibacterial, Photo-Cross-Linkable Hydrogel of Gallic Acid-Chitosan Methacrylate: Synthesis, In Vitro, and In Vivo Assessments

Chitosan (CS)-based photo-cross-linkable hydrogels have gained increasing attention in biomedical applications. In this study, we grafted CS with gallic acid (GA) by carbodiimide chemistry to prepare the GA-CS conjugate, which was subsequently modified with methacrylic anhydride (MA) modification to obtain the methacrylated GA-CS conjugate (GA-CS-MA). Our results demonstrated that the GA-CS-MA hydrogel not only exhibited improved physicochemical properties but also showed antibacterial, antioxidative, and anti-inflammatory capacity. It showed moderate antibacterial activity and especially showed a more powerful inhibitory effect against Gram-positive bacteria. It modulated macrophage polarization, downregulated pro-inflammatory gene expression, upregulated anti-inflammatory gene expression, and significantly reduced reactive oxygen species (ROS) and nitric oxide (NO) production under lipopolysaccharide (LPS) stimulation. Subcutaneously implanted GA-CS-MA hydrogels induced significantly lower inflammatory responses, as evidenced by less inflammatory cell infiltration, thinner fibrous capsule, and predominately promoted M2 polarization. This study provides a feasible strategy to prepare CS-based photo-cross-linkable hydrogels with improved physicochemical properties for biomedical applications.

Antibacterial, cytotoxic and mechanical properties of a orthodontic cement with phosphate nano-sized and phosphorylated chitosan: An in vitro study

OBJECTIVES

Evaluate, in vitro, the effect of incorporating nano-sized sodium trimetaphosphate (TMPnano) and phosphorylated chitosan (Chi-Ph) into resin-modified glass ionomer cement (RMGIC) used for orthodontic bracket cementation, on mechanical, fluoride release, antimicrobial and cytotoxic properties.

METHODS

RMGIC was combined with Chi-Ph (0.25%/0.5%) and/or TMPnano (14%). The diametral compressive/tensile strength (DCS/TS), surface hardness (SH) and degree of conversion (%DC) were determined. For fluoride (F) release, samples were immersed in des/remineralizing solutions. Antimicrobial/antibiofilm activity was evaluated by the agar diffusion test and biofilm metabolism (XTT). Cytotoxicity in fibroblasts was assessed with the resazurin method.

RESULTS

After 24 h, the RMGIC-14%TMPnano group showed a lower TS value (p < 0.001); after 7 days the RMGIC-14%TMPnano-0.25%Chi-Ph group showed the highest value (p < 0.001). For DCS, the RMGIC group (24 h) showed the highest value (p < 0.001); after 7 days, the highest value was observed for the RMGIC-14%TMPnano-0.25%Chi-Ph (p < 0.001). RMGIC-14%TMPnano, RMGIC-14%TMPnano-0.25%Chi-Ph, RMGIC-14%TMPnano-0.5%Chi-Ph showed higher and similar release of F (p > 0.001). In the SH, the RMGIC-0.25%Chi-Ph; RMGIC-0.5%Chi-Ph; RMGIC-14%TMPnano-0.5%Chi-Ph groups showed similar results after 7 days (p > 0.001). The RMGIC-14%TMPnano-0.25%Chi-Ph group showed a better effect on microbial/antibiofilm growth, and the highest efficacy on cell viability (p < 0.001). After 72 h, only the RMGIC-14%TMPnano-0.25%Chi-Ph group showed cell viability (p < 0.001).

CONCLUSION

The RMGIC-14%TMPnano-0.25%Chi-Ph did not alter the physical-mechanical properties, was not toxic to fibroblasts and reduced the viability and metabolism of S. mutans.

CLINICAL RELEVANCE

The addition of phosphorylated chitosan and organic phosphate to RMGIC could provide an antibiofilm and remineralizing effect on the tooth enamel of orthodontic patients, who are prone to a high cariogenic challenge due to fluctuations in oral pH and progression of carious lesions.

Fighting against biofilm: The antifouling and antimicrobial material

Biofilms are groups of microorganisms protected by self-secreted extracellular substances. Biofilm formation on the surface of biomaterial or engineering materials becomes a severe challenge. It has caused significant health, environmental, and societal concerns. It is believed that biofilms lead to life-threatening infection, medical implant failure, foodborne disease, and marine biofouling. To address these issues, tremendous effort has been made to inhibit biofilm formation on materials. Biofilms are extremely difficult to treat once formed, so designing material and coating bearing functional groups that are capable of resisting biofilm formation has attracted increasing attention for the last two decades. Many types of antibiofilm strategies have been designed to target different stages of biofilm formation. Development of the antibiofilm material can be classified into antifouling material, antimicrobial material, fouling release material, and integrated antifouling/antimicrobial material. This review summarizes relevant research utilizing these four approaches and comments on their antibiofilm properties. The feature of each method was compared to reveal the research trend. Antibiofilm strategies in fundamental research and industrial applications were summarized.

Acryloyl chitosan as a macro-crosslinker for freezing-resistant, self-healing and self-adhesive ionogels-based multicompetent flexible sensors

Here, a polysaccharide derivative acryloyl chitosan (AcCS) is exploited as macro-crosslinker to synthesize a novel ionogel poly (acrylic acid-co-1-Vinyl-3-butyl imidazolium chloride) (AA-IL/AcCS) via a one-pot method. AcCS provides abundant physical and chemical crosslinking sites contributing to the high mechanical stretchability (elongation at break 600 %) and strength (tensile strength 137 kPa) of AA-IL/AcCS. The high-density of dynamic bonds (hydrogen bonds and electrostatic interactions) in the network of ionogels enables self-healing and self-adhesive features of AA-IL/AcCS. Meanwhile, AA-IL/AcCS exhibits high ionic conductivity (0.1 mS/cm) at room temperature and excellent antifreeze ability (-58 °C). The AA-IL/AcCS-based sensor shows diverse sensory capabilities towards temperature and humidity, moreover, it could precisely detect human motions and handwritings signals. Furthermore, AA-IL/AcCS exhibits excellent bactericidal properties against both gram-positive and gram-negative bacteria. This work opens the possibility of polysaccharides as a macro-crosslinkers for preparing ionogel-based sensors for wearable electronics.

Dehydration-Toughing Dual-Solvent Gels with Viscoelastic Transition for Infectious Wound Treatment

The modulus of traditional biomedical hydrogels increases exponentially meditated by dehydration-stiffing mechanism, which leads to the failure of interface matching between hydrogels and soft tissue wounds. It is found in the study that the dual-solvent gels exhibit dehydration-toughening mechanism with the slowly increasing modulus that are always match the soft tissue wounds. Therefore, dual-solvent glycerol hydrogels (GCFen-gly DGHs) are prepared with hydrophobically modified catechol chitosan (hmCSC) and gelatin based on the supramolecular interactions. GCFen-gly DGHs exhibit excellent water retention capacity with a total solvent content exceeding 80%, permanent skin-like modulus within a range of 0.45 to 4.13 kPa, and stable photothermal antibacterial abilities against S, aureus, E. coli, as well as MRSA. Infectious full-thickness rat skin defect model and tissue section analysis indicate that GCFen-gly DGHs are able to accelerate infectious wound healing by alleviating the inflammatory response, promoting granulation tissue growth, re-epithelialization, collagen deposition, and vascular regeneration. As a result, GCFen-gly DGHs is expected to become the next-generation biological gel materials for infectious wound treatment.

A unidirectional water-transport antibacterial bilayer nanofibrous dressing based on chitosan for accelerating wound healing

Excessive accumulation of exudate from wounds often causes infection and hinders skin regeneration. To handle wound exudate quickly and prevent infection, we developed an antibacterial Janus nanofibrous dressing with a unidirectional water-transport function. The dressing consists of a hydrophilic chitosan aerogel (CS-A) as the outer layer and a hydrophobic laurylated chitosan (La-CS) nanofibrous membrane as the inner layer. These dressings achieved excellent liquid absorption performance (2987.8 ± 123.5 %), air and moisture permeability (997.8 ± 23.1 g/m2/day) and mechanical strength (5.1 ± 2.6 MPa). This performance was obtained by adjusting the density of CS-A and the thickness of the La-CS membrane. Moreover, the dressing did not induce significant toxicity to cells and can prevent bacterial aggregation and infection at the wound site. Animal experiments showed that the dressing can shorten the inflammatory phase, enhance blood vessel generation, and accelerate collagen deposition, thus promoting wound healing. Overall, these results suggest that this Janus dressing is a promising material for clinical wound care.

Advances of biological macromolecules hemostatic materials: A review

Achieving hemostasis is a necessary intervention to rapidly and effectively control bleeding. Conventional hemostatic materials currently used in clinical practice may aggravate the damage at the bleeding site due to factors such as poor adhesion and poor adaptation. Compared to most traditional hemostatic materials, polymer-based hemostatic materials have better biocompatibility and offer several advantages. They provide a more effective method of stopping bleeding and avoiding additional damage to the body in case of excessive blood loss. Various hemostatic materials with greater functionality have been developed in recent years for different organs using diverse design strategies. This article reviews the latest advances in the development of polymeric hemostatic materials. We introduce the coagulation cascade reaction after bleeding and then discuss the hemostatic mechanisms and advantages and disadvantages of various polymer materials, including natural, synthetic, and composite polymer hemostatic materials. We further focus on the design strategies, properties, and characterization of hemostatic materials, along with their applications in different organs. Finally, challenges and prospects for the application of hemostatic polymeric materials are summarized and discussed. We believe that this review can provide a reference for related research on hemostatic materials, contributing to the further development of polymer hemostatic materials.

Chitosan derivatives act as a bio-stimulants in plants: A review

Chitosan has been considered an eco-friendly biopolymer. Chitosan is a natural polycationic linear polysaccharide composed of D-glucosamine and N-acetyl-D-glucosamine linked by β-1,4-glycosidic bonds. Chitosan has been used as an eco-friendly biopolymer for so many agricultural applications. Unfortunately, the relatively poor solubility and poor antimicrobial properties limit its widespread applications in agriculture sciences. Hence, chitosan derivatives are produced via various chemical approaches such as cross-linking, carboxylation, ionic binding, and so on. As an alternative to chemical fertilizers, chitosan derivatives, chitosan conjugates, nanostructures, semisynthetic derivatives, oligo mixes, chitosan nanoparticles, and chitosan nano-carriers are synthesized for various agricultural applications. Its several chemical and physical properties such as biocompatibility, biodegradability, permeability, cost-effectiveness, low toxicity, and environmental friendliness make it useful for many agricultural applications. Hence, popularizing its use as an elicitor molecule for different host-pathogen interaction studies. Thus, the versatile and plethora of chitosan derivatives are gaining momentum in agricultural sciences. Bio-stimulant properties and multifunctional benefits are associated with further prospective research. Therefore, in the present review, we decipher the potential pros and cons of chitosan derivatives in plants.

Exploiting the advantages of cationic copolymers and AgBr nanoparticles to optimize the antibacterial activity of chitosan

Recently, the chitosan (CS)-based composites have attracted increasing attention for controlling and preventing the spread of pathogenic microorganisms. Herein, an amphiphilic copolymer containing epoxy and quaternary ammonium groups (PBGDBr) was synthesized via three common acrylate monomers. The epoxy groups of this copolymer were then crosslinked with the amino groups of CS to synthesize a natural/synthetic (PBGDBr-C) composite to increase the water solubility of CS under alkaline conditions and enhance its antibacterial activity based on chemical contact-type modes. Moreover, silver bromide nanoparticles (AgBr NPs)-decorated PBGDBr-C (AgBr@PBGDBr-C) composite was prepared, which aimed to endow the final AgBr@PBGDBr-C composite with a photodynamic antibacterial mode relying on the formation of Ag/AgBr nanostructures catalyzed by visible light on AgBr NPs. The results showed that the final composite possessed satisfactory bactericidal effects at concentrations higher than 64 and 128 μg/mL against Escherichia coli and Staphylococcus aureus, respectively. Additionally, The L929 cells treated with the final composite retained high cell viability (>80 %) at a concentration of 128 μg/mL, indicating its low toxicity to L929 cells. Overall, our synthetic strategy exploits a multi-modal system that enables chemical-photodynamic synergies to treat infections caused by pathogenic bacteria while delaying the development of bacterial resistance.

Synthesis of novel chitosan/sodium hyaluronate/iridium hydrogel nanocomposite for wound healing application

A novel chitosan/sodium hyaluronate/iridium (CHI/SH/Ir) hydrogel nanocomposite with a unique microstructure containing vertically aligned pores is fabricated via an electrophoresis technique. The formation of orderly vertical pores in CHI/SH/Ir hydrogel nanocomposite is due to the confinement of hydrogen bubbles produced from the water electrolysis during electrophoresis that limits their lateral movement and coalescence. In a wet state, the diameter for the vertical pores is 600-700 μm. With a thickness of 500 μm, the CHI/SH/Ir hydrogel nanocomposite exhibits a porosity of 76.7 % and a water uptake of 350 %. Its tensile strength is almost doubled to 8.7 MPa, as compared to that of counterpart without the addition of iridium. In CHI/SH/Ir hydrogel nanocomposite, the iridium nanoparticles are homogeneously distributed with an average size of 3 nm. The CHI/SH/Ir electrophoresis suspension exhibits a negligible cytotoxicity. In cell migration test using the human keratinocytes HaCaT cells, the CHI/SH/Ir hydrogel nanocomposite reveals a relative migration of 122.15 ± 9.02 % (p < 0.001) as compared to the blank sample. The presence of vertically aligned pores with the use of SH and iridium nanoparticles indicates a promising opportunity in wound healing application.

Fabrication of chitosan-based fluorescent hydrogel membranes cross-linked with bisbenzaldehyde for efficient selective detection and adsorption of Fe2

Chitosan, as a natural biomass material, is green, recyclable, sustainable and well biocompatible. The molecular chain is rich in active groups such as amino and hydroxyl groups, and its preparation of fluorescent probes has the advantages of biocompatibility and efficient detection performance. In this study, a bis(benzaldehyde) (BHD) fluorescent functional molecule was designed. Then a series of fluorescent chitosan-based hydrogel films (CSBHD) were prepared using chitosan as raw material and BHD as cross-linking agent. As a fluorescent probe for metal ions, CSBHD was able to efficiently detect Fe2+ with a linear correlation of fluorescence intensity in the range of 0-160 μM, and the limit of detection (LOD) was 0.55 μM. Moreover, it has excellent adsorption performance for Fe2+ ions, with a maximum adsorption capacity of 223.5 g/mg at 500 mg/L Fe2+ concentration. Finally, we characterised the structure and microscopic morphology of CSBHD films and found that CSBHD as a hydrogel film has a high cross-linking density, good water resistance, excellent thermal stability, strong resistance to swelling, and excellent stability in cycling tests. Hence, it has great potential for application in adsorption and detection of Fe2+ ions. It also provides a good strategy for the application of chitosan based fluorescent probe materials in environmental monitoring and heavy metal ion adsorption.