Dissolution of Cellulosic Fibers: Impact of Crystallinity and Fiber Diameter

Novel insights into the mechanism of dynamic changes in microstructure and physicochemical properties of corn straw pretreated by ball milling and feasibility analysis of anaerobic digestion

In this study, the effects of Ball milling (BM) pretreatment (0-240 min) on the microstructure, physicochemical properties and subsequent methanogenesis performance of corn straw (CS) were explored, and the feasibility analysis was carried out. The results showed that BM pretreatment destroyed the dense structure of the CS, and the particle size was significantly reduced (D50: 13.85 μm), transforming it into a cell-scale granular form. The number of mesopores increased, the pore volume (PV) (0.032 cm3/g) and specific surface area (SSA) (4.738 m2/g) considerably increased, and the water-absorbent property was improved. The crystalline order of cellulose was disrupted and the crystallinity (CrI) (8.61 %) and crystal size (CrS) (3.37) were remarkably reduced. The cross-links between lignocelluloses were broken, and the relative content and functional groups did not alter obviously. The bulk density (BD), repose angle (RA) and slip angle (SA) dramatically increased. As a result, CS was more readily accessible, attached and utilized by microorganisms and enzymes, causing the hydrolysis and acidification of AD to be greatly facilitated. Compared with the untreated group, the cumulative methane production (CMP) increased by 35.83 %-101.97 %, and the lag phase time (λ) was shortened by 33.04 %-71.17 %. The results of redundancy analysis, Pearson analysis and Mantel test showed that BM pretreatment affects the process of AD by changing the physicochemical factors of CS. The normalization analysis showed that particle size (D90) and BD can be used as direct indicators to evaluate the performance of AD and predict the threshold of biodegradation of CS. Energy analysis and energy conversion assessment showed that BM is a green and efficient AD pretreatment strategy. This result provides a theoretical basis for the industrial application of BM pretreatment towards more energy-efficient and sustainable development.

Revisiting various mechanistic approaches for cellulose dissolution in different solvent systems: A comprehensive review

The process of dissolving cellulose is a pivotal step in transforming it into functional, value-added materials, necessitating a thorough comprehension of the underlying mechanisms to refine its advanced processing. This article reviews cellulose dissolution using various solvent systems, along with an in-depth exploration of the associated dissolution mechanisms. The efficacy of different solvents, including aqueous solvents, organic solvents, ionic liquids, hybrid ionic liquid/cosolvent systems, and deep eutectic solvents, in dissolving cellulose is scrutinized, and their limitations and advantages are highlighted. In addition, this review methodically outlines the mechanisms at play within these various solvent systems and the factors influencing cellulose solubility. Conclusions drawn highlight the integral roles of the degree of polymerization, crystallinity, particle size, the type and sizes of cations and anions, alkyl chain length, ionic liquid/cosolvent ratio, viscosity, solvent acidity, basicity, and hydrophobic interactions in the dissolution process. This comprehensive review aims to provide valuable insights for researchers investigating biopolymer dissolution in a broader context, thereby paving the way for broader applications and innovations of these solvent systems.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Comprehensive understanding of enzymatic saccharification of Betaine:Lactic acid-pretreated sugarcane bagasse

Green solvents, especially deep eutectic solvents (DESs), are widely applied to pretreat biomass for enhancing its enzymatic hydrolysis. In this work, lactic acid was selected as the hydrogen-bond-donor to prepare Betaine-base DES (Betaine:LA), The DES was utilized to pretreat sugarcane bagasse (SCB) at 160 ℃ for 80 min (severity factor LogR0 = 3.67). The influences of Betaine:LA treatment on the chemical composition, crystal and microstructure structure of cellulose, and cellulase digestion were investigated. The results showed that the lignin (47.1%) and xylan (44.6%) were removed, the cellulase digestibility of Betaine:LA-treated SCB was 4.2 times that of the raw material. This improved efficiency was attributed to the enhanced accessibility of cellulose, the weakened surface area of lignin, the declined hydrophobicity, and the decreased crystallinity of cellulose. Several compelling linear correlations were fitted between enzymatic hydrolysis and these alterations of physicochemical features, comprehensively understanding enzymatic saccharification of Betaine:LA-pretreated SCB.

Exploring carbohydrate extraction from biomass using deep eutectic solvents: Factors and mechanisms

Deep eutectic solvents (DESs) are increasingly being recognized as sustainable and promising solvents because of their unique properties: low melting point, low cost, and biocompatibility. Some DESs possess high viscosity, remarkable stability, and minimal toxicity, enhancing their appeal for diverse applications. Notably, they hold promise in biomass pretreatment, a crucial step in biomass conversion, although their potential in algal biomass carbohydrates extraction remains largely unexplored. Understanding the correlation between DESs' properties and their behavior in carbohydrate extraction, alongside cellulose degradation mechanisms, remains a gap. This review provides an overview of the use of DESs in extracting carbohydrates from lignocellulosic and algal biomass, explores the factors that influence the behavior of DESs in carbohydrate extraction, and sheds light on the mechanism of cellulose degradation by DESs. Additionally, the review discusses potential future developments and applications of DESs, particularly extracting carbohydrates from algal biomass.

Effect of hemicellulose content on the solution properties of cellulose carbamates in NaOH/ZnO aqueous system

Hemicellulose removal from bleached bamboo pulp is key to produce qualified dissolving pulps. In this work, alkali/urea aqueous solution was firstly applied to remove hemicellulose in bleached bamboo pulp (BP). The effect of urea usage, time and temperature on the hemicellulose content of BP was studied. The reduction of hemicellulose content from 15.9 to 5.7 % was achieved in 6 wt% NaOH/1 wt% urea aqueous solution at 40 °C for 30 min. Cellulose carbamates (CCs) were obtained from the esterification of BP with urea. The dissolution behavior of CCs in NaOH/ZnO aqueous solutions with different degree of polymerization (DP), hemicellulose and nitrogen contents were studied by using optical microscope and rheology. The highest solubility was up to 97.7 % when the hemicellulose was 5.7 % and Mη was 6.5 × 104 (g/mol). With the decrease of hemicellulose content from 15.9 % to 8.60 % and 5.70 %, the gel temperature increased from 59.0, 69.0 to 73.4 °C. The apparent gelation time increased from 5640 to 12,120 s with the hemicellulose content increased from 8.60 % to 15.9 %. CC solution with 5.70 % hemicellulose always keeps a liquid-state (G" > G') until the test time reached 17,000 s. The results showed that the removal of hemicellulose, the decrease of DP and the increase of esterification endowed CC with higher solubility and solution stability.

Electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds - a step towards ligament repair applications

The incidence of anterior cruciate ligament (ACL) ruptures is approximately 50 per 100,000 people. ACL rupture repair methods that offer better biomechanics have the potential to reduce long term osteoarthritis. To improve ACL regeneration biomechanically similar, biocompatible and biodegradable tissue scaffolds are required. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), with high 3-hydroxyvalerate (3HV) content, based scaffold materials have been developed, with the advantages of traditional tissue engineering scaffolds combined with attractive mechanical properties, e.g., elasticity and biodegradability. PHBV with 3HV fractions of 0 to 100 mol% were produced in a controlled manner allowing specific compositions to be targeted, giving control over material properties. In conjunction electrospinning conditions were altered, to manipulate the degree of fibre alignment, with increasing collector rotating speed used to obtain random and aligned PHBV fibres. The PHBV based materials produced were characterised, with mechanical properties, thermal properties and surface morphology being studied. An electrospun PHBV fibre mat with 50 mol% 3HV content shows a significant increase in elasticity compared to those with lower 3HV content and could be fabricated into aligned fibres. Biocompatibility testing with L929 fibroblasts demonstrates good cell viability, with the aligned fibre network promoting fibroblast alignment in the axial fibre direction, desirable for ACL repair applications. Dynamic load testing shows that the 50 mol% 3HV PHBV material produced can withstand cyclic loading with reasonable resilience. Electrospun PHBV can be produced with low batch variability and tailored, application specific properties, giving these biomaterials promise in tissue scaffold applications where aligned fibre networks are desired, such as ACL regeneration.   .

Surface Modification of Decellularized Natural Cellulose Scaffolds with Organosilanes for Bone Tissue Regeneration

The utility of plant tissues as scaffolding materials has been gaining significant interest in recent years owing to their unique material characteristics that are ideal for tissue regeneration. In this study, the degradation and biocompatibility of natural cellulosic scaffolds derived from Borassus flabellifer (Linn.) (BF) immature endosperm was improved by chemical oxidation and surface functionalization processes. Briefly, thus obtained cellulosic scaffolds were sequentially processed via a detergent exchange decellularization process followed by sodium periodate mediated oxidation and organosilane-based surface modification using amino (NH₂)-terminated 3-aminopropyltriethoxysilane (APTES) and methyl (CH₃)-terminated octadecyltrichlorosilane (OTS). Post oxidation and surface functionalization, the scaffolds showed improved physiochemical, morphological, and mechanical properties. Especially, the swelling capacity, total porosity, surface area, degradation kinetics, and mechanical behavior of scaffold were significantly higher in modified scaffold groups. The biocompatibility analysis demonstrated excellent cellular adhesion, proliferation and differentiation of osteoblasts with an evident upregulation of mineralization. Subcutaneous implantation of these scaffolds in a rat model demonstrated active angiogenesis, enhanced degradation, and excellent biocompatibility with concomitant deposition of a collagen matrix. Taken together, the native cellulosic scaffolds post chemical oxidation and surface functionalization can exclusively integrate the potential properties of native soft tissue with ameliorated in vitro and in vivo support in bone tissue engineering for nonloading bearing applications.

Understanding the Dynamics of Cellulose Dissolved in an Ionic Liquid Solvent Under Shear and Extensional Flows

Ionic liquids (ILs) hold great potential as solvents to dissolve, recycle, and regenerate cellulosic fabrics, but the dissolved cellulose material system requires greater study in conditions relevant to fiber spinning processes, especially characterization of nonlinear shear and extensional flows. To address this gap, we aimed to disentangle the effects of the temperature, cellulose concentration, and degree of polymerization (DOP) on the shear and extensional flows of cellulose dissolved in an IL. We have studied the behavior of cellulose from two sources, fabric and filter paper, dissolved in 1-ethyl-3-methylimidazolium acetate ([C₂C₁Im][OAc]) over a range of temperatures (25 to 80 °C) and concentrations (up to 4%) that cover both semidilute and entangled regimes. The linear viscoelastic (LVE) response was measured using small-amplitude oscillatory shear techniques, and the results were unified by reducing the temperature, concentration, and DOP onto a single master curve using time superposition techniques. The shear rheological data were further fitted to a fractional Maxwell liquid (FML) model and were found to satisfy the Cox-Merz rule within the measurement range. Meanwhile, the material response in the non-LVE (NLVE) regime at large strains and strain rates has special relevance for spinning processes. We quantified the NLVE behavior using steady shear flow tests alongside uniaxial extension using a customized capillary breakup extensional rheometer. The results for both shear and extensional NLVE responses were described by the Rolie-Poly model to account for flow-dependent relaxation times and nonmonotonic viscosity evolution with strain rates in an extensional flow, which primarily arise from complex polymer interactions at high concentrations. The physically interpretable model fitting parameters were further compared to describe differences in material response to different flow types at varying temperatures, concentrations, and DOP. Finally, the fitting parameters from the FML and Rolie-Poly models were connected under the same superposition framework to provide a comprehensive description within the wide measured parameter window for the flow and handling of cellulose in [C₂C₁Im][OAc] in both linear and nonlinear regimes.

Utilization of Cellulose to Its Full Potential: A Review on Cellulose Dissolution, Regeneration, and Applications

As the most abundant natural polymer, cellulose is a prime candidate for the preparation of both sustainable and economically viable polymeric products hitherto predominantly produced from oil-based synthetic polymers. However, the utilization of cellulose to its full potential is constrained by its recalcitrance to chemical processing. Both fundamental and applied aspects of cellulose dissolution remain active areas of research and include mechanistic studies on solvent-cellulose interactions, the development of novel solvents and/or solvent systems, the optimization of dissolution conditions, and the preparation of various cellulose-based materials. In this review, we build on existing knowledge on cellulose dissolution, including the structural characteristics of the polymer that are important for dissolution (molecular weight, crystallinity, and effect of hydrophobic interactions), and evaluate widely used non-derivatizing solvents (sodium hydroxide (NaOH)-based systems, N,N-dimethylacetamide (DMAc)/lithium chloride (LiCl), N-methylmorpholine-N-oxide (NMMO), and ionic liquids). We also cover the subsequent regeneration of cellulose solutions from these solvents into various architectures (fibers, films, membranes, beads, aerogels, and hydrogels) and review uses of these materials in specific applications, such as biomedical, sorption, and energy uses.

Effect of Enzymatic Depolymerization of Cellulose and Hemicelluloses on the Direct Dissolution of Prehydrolysis Kraft Dissolving Pulp

Prehydrolysis kraft (PHK) pulps account for more than half of the global market of dissolving pulp. Characterized by high reactivity toward dissolution, their performances can still be improved by activation treatments. This study compares the dissolution kinetics in cupriethylenediamine of a hardwood and a softwood PHK pulps before and after their activation by high-solid-content mechano-enzymatic treatments. Three enzyme combinations were tested: endoglucanase (E), xylanase and mannanase (XM), and endoglucanase, xylanase, and mannanase (EXM). Xylanase and mannanase reduced the hemicellulose content of only hardwood (by max. 2.4%). Mixing and carbohydrate depolymerization decreased the dissolution time of hardwood and softwood pulps by a maximum of 63 and 30% with E, 37 and 16% with XM, and 44 and 30% with EXM, respectively. The shortening of the dissolution time was partially hindered by hornification, which increased with hemicellulose degradation. Interestingly, XM accelerated the dissolution while preserving a high weight-average molecular mass.

Facile preparation of all-cellulose composites from softwood, hardwood, and agricultural straw cellulose by a simple route of partial dissolution

In this study, we report a novel, facile, and green method that was used for creating a new all-cellulose composite (ACC) based on inorganic molten salt solvent. Three representatively native fibers from softwood (Pinus kesiya), hardwood (Eucalyptus globulus), and agricultural straw (Zea mays) were selected to verify the effect of the method. The welded sheets were thoroughly characterized and compared. Cellulose sheets from the pine exhibited excellent mechanical properties (σb 16.94 MPa) and thermal stability (T_max 265 °C) after the welding process, while the corn stalk sheets displayed more robust and thermostable features than the eucalyptus. The welding technique using inorganic metal salt hydrate provides a promising and convenient route to obtain firm sheet-materials with micro- or nano-structures from nature fibers.

Crystalline stability of cellulose III nanocrystals in the hydrothermal treatment and NaOH solution

To better understand the system and conversion of cellulose allomorphs, cellulose III nanocrystals (CNC-III) were used to investigate the crystalline stability of cellulose III in the hydrothermal condition and a lower concentrated NaOH-water system. It was shown that H₂O or alkali played an important role in the process of polymorphic transformation. The CNC-III allomorph turned back to cellulose I with an extremely low crystallinity (∼4.18 %) during hydrothermal process at 90-95 °C, or cellulose II when the temperature excessed boiling point (≥100 °C). Furthermore, CNC-III could be rapidly dissolved in an aqueous NaOH (∼7 wt.%) without a pre-cooled treatment to obtain its stable solution. Afterwards, cellulose II with a steady average crystallite size (∼34) was acquired after the regeneration process via dialysis with distilled water. The polymorphic transformation was also analyzed by X-ray diffraction (XRD), solid-state ¹³C nuclear magnetic resonance (¹³C NMR).

A comparative study of the functional properties and antioxidant activity of soybean meal extracts obtained by conventional extraction and electro-activated solutions

Functional properties and antioxidant activity of soybean meal extracts obtained by conventional chemical method were compared to those obtained by using electro-activated solutions. The conventional extract obtained at pH8 had the highest WAC (400 ± 7 g/100 g), while the lowest was that of samples extracted under pH3. Extract obtained using electro-activated solution Anolyte_300mA-30 min had WAC value (25 ± 1 g/100 g). OAC was the highest for samples extracted under alkaline conditions whatever the extraction mode used with values of 5.50 ± 0.54 to 6.85 ± 0.62 mL/g. FC of the conventional extracts was higher compared to those extracted by electro-activation with maximal value of 52% for the conventional sample obtained at pH9, whereas the maximal FC of 28% was observed for the electro-activated sample obtained by using Anolyte_450mA-50 min. Electro-activated showed higher EP. Conventional extracts showed higher antioxidant activity (92.31 ± 1.5%) than those obtained by electro-activation (47.46 ± 0.94%).

Cellulose hydrolysis using ionic liquids and inorganic acids under dilute conditions: morphological comparison of nanocellulose

The preparation of cellulose nanocrystals (CNCs) from cellulose extracted from cotton gin motes (CGM) using an ionic liquid (1-butyl-3-methylimidazolium chloride, [BMIm]Cl) under dilute conditions is reported. The concurrent process involves minimal swelling of cellulose with an ionic liquid and hydrolysis of the cellulose initiated by the addition of either phosphoric (H₃PO₄), hydrochloric (HCl), or sulfuric (H₂SO₄) acid. The obtained nanocrystals had similar physical properties (e.g. crystallinity) to the counterparts prepared under conventional conditions and exhibited superior thermal properties for sulfate CNCs. Additionally, the obtained CNCs had low surface functionalization, yet were colloidally stable for >90 days, which is a desirable trait for post-functionalization of CNCs. This process represents a general strategy utilizing dilute ionic liquids in the preparation of nanocellulose under mildly acidic conditions.

Cellulose nanocrystals prepared with 1-butyl-3-methylimidazolium chloride ([BMIm]Cl) and HCl, H₂SO₄, or H₃PO₄ in a one-pot process under dilute conditions are investigated for changes in CNC dimensions, crystallinity, and thermal stability.

Kinetic analysis of microwave-enhanced cellulose dissolution in ionic solvents

Cellulose dissolution in mixtures of the ionic liquid 1-ethyl-3-methylimidazolium acetate with dimethylsulfoxide, [C₂C₁Im][OAc] + DMSO, have been kinetically compared using conventional heating and microwave heating in a single-mode cavity with a semiconductor generator. Microwaves led to enhancements in the dissolution rate between 21 and 57% under different conditions of temperature and concentration of ionic liquid. Rate enhancement by microwaves prominently occurred at temperatures above 60 °C. Based on an Arrhenius plot and wide-band dielectric measurements we advance the hypothesis that the faster dissolution is caused by ionic motion induced by microwaves in the timescale of formation and breaking of hydrogen bonds between cellulose chains and acetate anions.