High-Strength, High-Toughness Aligned Polymer-Based Nanocomposite Reinforced with Ultralow Weight Fraction of Functionalized Nanocellulose

Cellulose-Reinforced Polylactic Acid Composites for Three-Dimensional Printing Using Polyethylene Glycol as an Additive: A Comprehensive Review

Growing concerns about environmental issues and global warming have garnered increased attention in recent decades. Consequently, the use of materials sourced from renewable and biodegradable origins, produced sustainably, has piqued the interest of scientific researchers. Biodegradable and naturally derived polymers, such as cellulose and polylactic acid (PLA), have consistently been the focus of scientific investigation. The objective is to develop novel materials that could potentially replace conventional petroleum-based polymers, offering specific properties tailored for diverse applications while upholding principles of sustainability and technology as well as economic viability. Against this backdrop, the aim of this review is to provide a comprehensive overview of recent advancements in research concerning the use of polylactic acid (PLA) and the incorporation of cellulose as a reinforcing agent within this polymeric matrix, alongside the application of 3D printing technology. Additionally, a pivotal additive in the combination of PLA and cellulose, polyethylene glycol (PEG), is explored. A systematic review of the existing literature related to the combination of these materials (PLA, cellulose, and PEG) and 3D printing was conducted using the Web of Science and Scopus databases. The outcomes of this search are presented through a comparative analysis of diverse studies, encompassing aspects such as the scale and cellulose amount added into the PLA matrix, modifications applied to cellulose surfaces, the incorporation of additives or compatibilizing agents, variations in molecular weight and in the quantity of PEG introduced into the PLA/cellulose (nano)composites, and the resulting impact of these variables on the properties of these materials.

Recent Advances in the Investigation of Poly(lactic acid) (PLA) Nanocomposites: Incorporation of Various Nanofillers and their Properties and Applications

Poly(lactic acid) (PLA) is considered the most promising biobased substitute for fossil-derived polymers due to its compostability, biocompatibility, renewability, and good thermomechanical properties. However, PLA suffers from several shortcomings, such as low heat distortion temperature, thermal resistance, and rate of crystallization, whereas some other specific properties, i.e., flame retardancy, anti-UV, antibacterial or barrier properties, antistatic to conductive electrical characteristics, etc., are required by different end-use sectors. The addition of different nanofillers represents an attractive way to develop and enhance the properties of neat PLA. Numerous nanofillers with different architectures and properties have been investigated, with satisfactory achievements, in the design of PLA nanocomposites. This review paper overviews the current advances in the synthetic routes of PLA nanocomposites, the imparted properties of each nano-additive, as well as the numerous applications of PLA nanocomposites in various industrial fields.

Emerging trends in direct air capture of CO2: a review of technology options targeting net-zero emissions

The increasing concentration of carbon dioxide (CO2) in the atmosphere has compelled researchers and policymakers to seek urgent solutions to address the current global climate change challenges. In order to keep the global mean temperature at approximately 1.5 °C above the preindustrial era, the world needs increased deployment of negative emission technologies. Among all the negative emissions technologies reported, direct air capture (DAC) is positioned to deliver the needed CO2 removal in the atmosphere. DAC technology is independent of the emissions origin, and the capture machine can be located close to the storage or utilization sites or in a location where renewable energy is abundant or where the price of energy is low-cost. Notwithstanding these inherent qualities, DAC technology still has a few drawbacks that need to be addressed before the technology can be widely deployed. As a result, this review focuses on emerging trends in direct air capture (DAC) of CO2, the main drivers of DAC systems, and the required development for commercialization. The main findings point to undeniable facts that DAC's overall system energy requirement is high, and it is the main bottleneck in DAC commercialization.

Acetylated Nanocelluloses Reinforced Shape Memory Epoxy with Enhanced Mechanical Properties and Outstanding Shape Memory Effect

Shape memory polymers (SMPs) have aroused much attention owing to their large deformation and programmability features. Nevertheless, the unsatisfactory toughness and brittleness of SMPs still restrict their practical intelligent applications, e.g., textiles, flexible electronics, and metamaterials. This study employed nature-derived nanocelluloses (NCs) as the reinforcement to fabricate shape memory epoxy-based nanocomposites (SMEPNs). An acetylation modification approach was further proposed to ameliorate the intrinsic incompatibility between NCs and epoxy matrix. The storage modulus increases, and the shape memory effect (SME) sustains after acetylated nanocelluloses (ANCs) incorporation. The SMEPNs with 0.06 wt.% ANCs loading perform the most exceptional toughness improvement over 42%, along with the enhanced fracture strain, elastic modulus, and ultimate strength. The incorporated nanoscale ANCs effectively impede crack propagation without deterioration of the macromolecular movability, resulting in excellent mechanical properties and SME.

Regioselective Protection and Deprotection of Nanocellulose Molecular Design Architecture: Robust Platform for Multifunctional Applications

Regioselectively substituted nanocellulose was synthesized by protecting the primary hydroxyl group. Herein, we took advantage of the different reactivities of primary and secondary hydroxyl groups to graft large capping structures. This study mainly focuses on regioselective installation of trityl protecting groups on nanocellulose chains. The elemental analysis and nuclear magnetic resonance spectroscopy of regioselectively substituted nanofibrillated cellulose (NFC) suggested that the trityl group was successfully grafted in the primary hydroxyl group with a degree of substitution of nearly 1. Hansen solubility parameters were employed, and the binary system composed of an ionic liquid and pyridine as a base was revealed to be the optimum condition for regioselective functionalization of nanocellulose. Interestingly, the dissolution of NFC in the ionic liquid and the subsequent deprotection process of NFC substrates hardly affected the crystalline structure of NFC (3.6% decrease in crystallinity). This method may provide endless possibilities for the design of advanced engineered nanomaterials with multiple functionalities. We envisage that this protection/deprotection approach may lead to a bright future for the fabrication of multifunctional devices based on nanocellulose.

Orientation of Polylactic Acid-Chitin Nanocomposite Films via Combined Calendering and Uniaxial Drawing: Effect on Structure, Mechanical, and Thermal Properties

The orientation of polymer composites is one way to increase the mechanical properties of the material in a desired direction. In this study, the aim was to orient chitin nanocrystal (ChNC)-reinforced poly(lactic acid) (PLA) nanocomposites by combining two techniques: calendering and solid-state drawing. The effect of orientation on thermal properties, crystallinity, degree of orientation, mechanical properties and microstructure was studied. The orientation affected the thermal and structural behavior of the nanocomposites. The degree of crystallinity increased from 8% for the isotropic compression-molded films to 53% for the nanocomposites drawn with the highest draw ratio. The wide-angle X-ray scattering results confirmed an orientation factor of 0.9 for the solid-state drawn nanocomposites. The mechanical properties of the oriented nanocomposite films were significantly improved by the orientation, and the pre-orientation achieved by film calendering showed very positive effects on solid-state drawn nanocomposites: The highest mechanical properties were achieved for pre-oriented nanocomposites. The stiffness increased from 2.3 to 4 GPa, the strength from 37 to 170 MPa, the elongation at break from 3 to 75%, and the work of fracture from 1 to 96 MJ/m³. This study demonstrates that the pre-orientation has positive effect on the orientation of the nanocomposites structure and that it is an extremely efficient means to produce films with high strength and toughness.

Preparation of effective ultraviolet shielding poly (lactic acid)/poly (butylene adipate-co-terephthalate) degradable composite film using co-precipitation and hot-pressing method

Biodegradable poly (lactide) (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) composite films were made by a co-precipitation and hot-pressing method. The property of composite films like the chemical interaction, phase morphology, mechanical properties, and thermal properties were studied. The Fourier transform infrared spectroscopy (FTIR) test manifested that there was a small amount of the transesterifications between the PBAT and PLA during hot pressing, which could improve the compatibility of the two phases. The tensile strength of the film only reduced by 7.4%, while the elongation at break was increased by 119.1% compared with PLA after adding 4%wt PBAT. The composite films showed a high Ultraviolet-visible (UV) light barrier property. The UV blocking rate of the composite after adding 4%wt PBAT was 6.95 times higher than that of pure PLA at 380 nm. The PLA/PBAT composite films with excellent thermal stability, satisfactory mechanical properties and UV-light barrier have high a possibility for an UV screening packaging application.

Recent Developments in Cellulose Nanomaterial Composites

Cellulose nanomaterials (CNMs) are a class of materials that have recently garnered attention in fields as varied as structural materials, biomaterials, rheology modifiers, construction, paper enhancement, and others. As the principal structural reinforcement of biomass giving wood its mechanical properties, CNM is strong and stiff, but also nontoxic, biodegradable, and sustainable with a very large (Gton yr^-1 ) source. Unfortunately, due to the relatively young nature of the field and inherent incompatibility of CNM with most man-made materials in use today, research has tended to be more basic-science oriented rather than commercially applicable, so there are few CNM-enabled products on the market today. Herein, efforts are presented for preparing and forming cellulose nanomaterial nanocomposites. The focus is on recent efforts attempting to mitigate common impediments to practical commercialization but is also placed in context with traditional efforts. The work is presented in terms of the progress made, and still to be made, on solving the most pressing challenges-getting properties that are competitive with currently used materials, removing organic solvent, solving the inherent incompatibility between CNM and polymers of interest, and incorporation into commonly used industrial processing techniques.

Alignment of Cellulose Nanofibers: Harnessing Nanoscale Properties to Macroscale Benefits

In nature, cellulose nanofibers form hierarchical structures across multiple length scales to achieve high-performance properties and different functionalities. Cellulose nanofibers, which are separated from plants or synthesized biologically, are being extensively investigated and processed into different materials owing to their good properties. The alignment of cellulose nanofibers is reported to significantly influence the performance of cellulose nanofiber-based materials. The alignment of cellulose nanofibers can bridge the nanoscale and macroscale, bringing enhanced nanoscale properties to high-performance macroscale materials. However, compared with extensive reviews on the alignment of cellulose nanocrystals, reviews focusing on cellulose nanofibers are seldom reported, possibly because of the challenge of aligning cellulose nanofibers. In this review, the alignment of cellulose nanofibers, including cellulose nanofibrils and bacterial cellulose, is extensively discussed from different aspects of the driving force, evaluation, strategies, properties, and applications. Future perspectives on challenges and opportunities in cellulose nanofiber alignment are also briefly highlighted.

Assembly of Anisotropic Nanocellulose Films Stronger than the Original Tree

Natural structural materials frequently consist of multimaterial nanocomposites with complex superstructure giving rise to exceptional mechanical properties, but also commonly preventing access to their synthetic reproduction. Here we present the spin-assisted layer-by-layer assembly of anisotropic wood-inspired films composed of anionic cellulose nanofibrils and cationic poly(vinyl amine) possessing a tensile strength that exceeds that of the wood from which the fibers originate. The degree of orientation of the nanofibrils was studied by atomic force microscopy and depends strongly on the distance from the center of the spun surface. The nanofibrils are preferentially aligned in the direction of the shear flow, and consequently, the mechanical properties of such films differ substantially when measured parallel and perpendicular to the fibril orientation direction. For enabling a diversity of bioinspired applications including sensing, packaging, electronics, or optics, the preparation of nanocomposite materials and devices with anisotropic physical properties requires an extreme level of control over the positioning and alignment of nanoscale objects within the matrix material.

Nanocellulose-based polymer hybrids and their emerging applications in biomedical engineering and water purification

Nanocellulose, derived from cellulose hydrolysis, has unique optical and mechanical properties, high surface area, and good biocompatibility. It is frequently used as a reinforcing agent to improve the native properties of materials. The presence of functional groups in its surface enables the alteration of its behavior and its use under different conditions. Nanocellulose is typically used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). CNCs and CNFs have a high aspect ratio with typical lengths of ∼100-250 nm and 0.1-2 μm, respectively; BNC is nanostructured cellulose produced by bacteria. Nanohybrid materials are a combination of organic or inorganic nanomaterials with macromolecules forming a single composite and typically exhibit superior optical, thermal, and mechanical properties to those of native polymers, owing to the greater interactions between the macromolecule matrix and the nanomaterials. Excellent biocompatibility and biodegradability make nanocellulose an ideal material for applications in biomedicine. Unlike native polymers, nanocellulose-based nanohybrids exhibit a sustained drug release ability, which can be further optimized by changing the content or chemical environment of the nanocellulose, as well as the external stimuli, such as the pH and electric fields. In this review, we describe the process of extraction of nanocellulose from different natural sources; its effects on the structural, morphological, and mechanical properties of polymers; and its various applications.