Photocatalysis in the Life Science Industry

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C-H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C-C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.

Light-Mediated Radical Addition to Azomethine Compounds: Novel Reactivity and Activation Modes

Azomethines is a class of compounds, which have traditionally served as electrophilic substrates, but their reactions with radicals have long been limited. Photocatalysis provided ample opportunities for promoting these reactions, with wide variety of reagents serving as precursors of radicals. Besides regular addition mode at the azomethine fragment, the oxidative pathway, in which the C=N bond remains in the product, has become possible by proper selection of redox catalyst. This review summarizes new developments in this rapidly developing field over the past five years. New concepts on activation of the C=N bond towards radical attack are discussed.

Recent developments in the photoredox catalyzed Minisci-type reactions under continuous flow

The Minisci reaction constitutes a straightforward and convenient strategy to achieve the direct C-H functionalization of heterocyclic molecules. This radical-based reaction platform has received increasing attention due to the predictability of its outcome according to the nature of the radicals and heterocycles involved. Considering the importance of these heterocyclic scaffolds in the development and production of drug molecules, it is inevitable that scaling up this reaction manifold is of utmost importance. This review will present recent strategies to achieve the goal, which mostly involve implementing the reaction conditions under continuous flow.

Heterogeneous photocatalytic organic transformation using crystalline naphthalenediimide/perylenediimide-based hybrid materials

The use of light energy to drive photocatalytic organic transformations for the production of high-value-added organic compounds has garnered growing interest as a sustainable strategy for solving environmental problems and addressing the energy crisis. Naphthalenediimide (NDI) and perylenediimide (PDI)-based hybrid materials are highly regarded photocatalysts due to their strong visible-light absorption properties, highly electron-deficient aromatic cores, excellent redox activity, and tunable electrochemical and photochemical properties. However, although the design and preparation of NDI/PDI-based hybrid materials have progressed in the past few years, their application in photocatalytic organic reactions remains in the initial stage. This review highlights the recent research progress in NDI/PDI-based hybrid materials and their crystalline composites for photocatalytic organic transformations. In particular, the synthetic methods, structures, photochemical properties, and catalytic performance of NDI/PDI-based hybrid photocatalysts are illustrated to provide useful guidance for the further development and application of these materials.

Boosting of the piezoelectric photocatalytic performance of Bi2MoO6 by Fe3+ doping and construction S-scheme heterojunction using WO3

Although self-polarized piezoelectric semiconductor photocatalysts significantly enhance the separation of internally generated photocarriers, their photocatalytic performance is constrained by insufficient internal polarisation and a wide bandgap. Additionally, the low concentration of oxygen in contaminated water limits the effectiveness of such photocatalysts. To the best of our knowledge, this study was the first to determine that the piezoelectric properties of Bi2MoO6 (BMO), was due to the polarisation displacement of the MoO6 octahedron that occurred along the x-axis, as revealed through density functional theory (DFT) calculations. Subsequently, the self-polarisation characteristics of BMO were enhanced and the bandgap was reduced through Fe3+ doping, as confirmed via atomic force microscopy, hysteresis loop measurements and DFT analysis, resulting in an increase in surface potential from 30.41 to 46.80 mV. Furthermore, an S-scheme WO3/Bi2MoO6:Fe3+ heterojunction was developed to improve the surface separation of photoelectron-hole pairs. The piezoelectric photocatalytic performance of this sample was evaluated through the degradation of rhodamine B (RhB) and oxygen generation. Results indicated that the degradation rate of RhB reached 98.63 % within 25 min under the synergistic influence of light and ultrasound, which was 1.85 and 9.60 times higher than those of Bi2MoO6 and WO3, respectively. Furthermore, the optimal oxygen production efficiency was 167.41 µmol·g-1·h-1. This study provides a novel approach for designing more efficient piezoelectric photocatalysts.

Visible-Light-Enabled Catalytic Intramolecular Double Oxidation of Olefins to ortho-Hydroxylactones

We have effectively utilized cost-effective 2-bromoanthraquinone as a photocatalyst to develop an efficient and environmentally friendly method for producing o-hydroxy lactones under mild visible light irradiation. Importantly, this protocol only relies on oxygen as an oxidant, completely eliminating the need for additional chemical reagents and showcasing a sustainable approach to chemical transformation. Operating at room temperature, we utilized a mixed solvent system of DMF and CHCl3, which greatly facilitated the selective conversion of various 2-vinylbenzoic acids and carboxylic acids to functional o-hydroxyl lactones. The process also exhibited excellent diastereoselectivity. Moreover, this versatile strategy is compatible with a wide range of biologically active and complex molecules, offering new opportunities for late-stage structural modifications of these compounds.

Visible-Light-Induced Divergent Oxygenation of Methylbenzene Utilizing Aryl Halides

The selective oxidation of methylbenzene to value-added products is of indisputable importance in organic synthesis. Although photocatalytic oxidation reactions of toluene have achieved great success for the preparation of its oxidative products, such as carboxylic acids, benzaldehyde, and benzoate, there remains a lack of a unified photocatalytic system for the selective preparation of these oxidation products. Herein, we report a metal- and additive-free photocatalytic protocol enabled by aryl halides using O2 as a green oxidant for the selective synthesis of the above-mentioned three oxidation products by adjusting the reaction solvent. This strategy features many advantages, including environmentally friendly and mild reaction conditions, broad substrate applicability and functional group tolerance, and potential practical application for the synthesis of aromatic carboxylic drugs and polymer materials and degradation of polystyrene waste. The continuous-flow system was utilized for the oxidation of toluene, which resulted in a reduced reaction time and increased production efficiency. Detailed mechanistic investigation revealed that the hydrogen atom transfer process was facilitated by the bromine radical from aryl halides for further oxidation, and an electron donor-acceptor complex of methylbenzene and aryl halides may exist.

Synergizing between interband and intraband defect states in prolonging the charge carrier lifetime of InSe/SiH heterojunctions

Experiments have demonstrated that defect states can regulate the charge carrier dynamics in heterojunctions. However, the underlying mechanism still remains under debate. Using nonadiabatic molecular dynamics, we have investigated the influence of inter and intraband defect states on charge relaxation in InSe/SiH heterojunctions. The simulations revealed that inter and intraband defect states have a weak effect on electron transfer, whereas they exert a strong influence on hole transfer and electron-hole recombination. Compared to the pristine system, the selenium vacancy creates two interband shallow electron trapping states and one intraband hole trapping state. The interband electron trapping states can capture photo-generated electrons, while the intraband hole trapping state accelerates hole transfer. The synergy between inter and intraband defect states suppresses the charge recombination by a factor of 8.3. This simulation rationalizes the influence mechanism of inter and intraband defect states on charge carrier dynamics, suggesting a valuable principle for enhancing the performance of heterojunction photocatalysts.

Unlocking Photocycloaddition Reactivity of Tropolone by Cage-Confined Visible-Light Photocatalysis for Multilevel Selective Transformation

The precise asymmetric photochemical transformation of organic compounds containing multiple reactive sites presents significant progress in synthetic chemistry. Herein, we report an unprecedented visible-light-induced cascade transformation of tropolone cyclic triene derivatives by using chiral photoactive metal-organic cages (cPMOCs) as enzyme-mimicking multipocket photocatalysts. The cage-confined photocatalysis promotes three successive elementary steps, i.e., enantioselective [2 + 2] photocycloaddition with chalcone, regio-, and diastereoselective α-ketol rearrangement, and a stereoselective 1,3-acyl shift, resulting in bicyclo[3.2.2]nonane skeleton with multichiral-centers unattainable by other methods. This study demonstrates how complex synthetic challenges of peri-, chemo-, and stereoselectivities could be subtly manipulated by cage-confined supramolecular catalysis for exploration of new reactivities.

Polaritonic Chemistry Enabled by Non-Local Metasurfaces

Vibrational strong coupling can modify chemical reaction pathways in unconventional ways. Thus far, Fabry-Perot cavities formed by pairs of facing mirrors have been mostly utilized to achieve vibrational strong coupling. In this study, we demonstrate the application of non-local metasurfaces that can sustain surface lattice resonances, enabling chemical reactions under vibrational strong coupling. We show that the solvolysis kinetics of para-nitrophenyl acetate can be accelerated by a factor of 2.7 by strong coupling to the carbonyl bond of the solvent and the solute with a surface lattice resonance. Our work introduces a new platform to investigate polaritonic chemical reactions. In contrast to Fabry-Perot cavities, metasurfaces define open optical cavities with single surfaces, which removes alignment hurdles, facilitating polaritonic chemistry across large areas.

Selective Oxidation of Alcohols to Carbonyls Under Decatungstate-Mediated Photoelectrochemical Conditions

The oxidation of alcohols to the corresponding carbonyl derivatives has been realized under photoelectrochemical conditions in the presence of tetrabutylammonium decatungstate (TBADT) as the homogeneous photocatalyst. The protocol can be applied to both primary and secondary, benzylic and aliphatic alcohols. The desired products are obtained selectively, skipping the need for purposely added chemical oxidants. An in-depth study of photoelectrochemical conditions revealed that the protocol works best under amperostatic conditions in an undivided electrochemical cell irradiated with a 390 nm LED lamp. The comparison with analogous electrochemical and chemical oxidant-promoted photocatalytic transformations demonstrates the superior efficiency and selectivity of the hereby reported photoelectrochemical conditions.

A facile access to aliphatic trifluoromethyl ketones via photocatalyzed cross-coupling of bromotrifluoroacetone and alkenes

Biological molecules incorporating trifluoromethyl ketones (TFMKs) have emerged as reversible covalent inhibitors, aiding in the management and treatment of inflammatory diseases, cancer, and respiratory conditions. TFMKs, renowned for their versatile binding properties and adaptability, are pivotal in the rational design of novel drugs for diverse diseases. The photocatalytic insertion of alkenes, abundant feedstocks, into the α-carbon of trifluoromethylacetone represents a highly effective and atom-economical method for synthesizing valuable TFMKs. However, these processes typically necessitate high-energy photoirradiation (λ > 300 nm, Hg lamp) and stoichiometric oxidants to generate the acetonyl radical from acetone. In our study, we demonstrate the visible-light photocatalytic radical addition into olefins using bromotrifluoroacetone as the trifluoroacetonyl radical precursor under mild conditions. Aliphatic trifluoromethyl ketones or the corresponding bromo-substituted products can be obtained by selecting an appropriate photocatalyst and solvent. Comprehensive experimental investigations, including cyclic voltammetry, Stern-Volmer quenching studies, and kinetic isotope effects, corroborate the synthesis of trifluoroacetonyl radical species from bromotrifluoroacetone under photoredox conditions. Further, we demonstrate the efficient synthesis of an oseltamivir derivative bearing a trifluoromethylketone moiety, which shows promising biological activity. Hence, this methodology will streamline the direct introduction of trifluoromethyl ketone into biological target molecules during drug discovery.

Leveraging the Redox Promiscuity of Nickel To Catalyze C-N Coupling Reactions

This perspective details advances made in the field of Ni-catalyzed C-N bond formation. The use of this Earth abundant metal to decorate amines, amides, lactams, and heterocycles enables direct access to a variety of biologically active and industrially relevant compounds in a sustainable manner. Herein, different strategies that leverage the propensity of Ni to facilitate both one- and two-electron processes will be surveyed. The first part of this Perspective focuses on strategies that facilitate C-N couplings at room temperature by accessing oxidized Ni(III) intermediates. In this context, advances in photochemical, electrochemical, and chemically mediated processes will be analyzed. A special emphasis has been put on providing a comprehensive explanation of the different mechanistic avenues that have been proposed to facilitate these chemistries; either Ni(I/III) self-sustained cycles or Ni(0/II/III) photochemically mediated pathways. The second part of this Perspective details the ligand designs that also enable access to this reactivity via a two-electron Ni(0/II) mechanism. Finally, we discuss our thoughts on possible future directions of the field.

At the Speed of Light: The Systematic Implementation of Photoredox Cross-Coupling Reactions for Medicinal Chemistry Research

The adoption of new and emerging techniques in organic synthesis is essential to promote innovation in drug discovery. In this Perspective, we detail the strategy we used for the systematic deployment of photoredox-mediated, metal-catalyzed cross-coupling reactions in AbbVie's medicinal chemistry organization, focusing on topics such as assessment, evaluation, implementation, and accessibility. The comprehensive evaluation of photoredox reaction setups and published methods will be discussed, along with internal efforts to build expertise and photoredox high-throughput experimentation capabilities. We also highlight AbbVie's academic-industry collaborations in this field that have been leveraged to develop new synthetic strategies, along with discussing the internal adoption of photoredox cross-coupling reactions. The work described herein has culminated in robust photocatalysis and cross-coupling capabilities which are viewed as key platforms for medicinal chemistry research at AbbVie.

Photoluminescent ruthenium(II) bipyridyl complexes containing phosphonium ylide ligands

A P-ylide Ru(II) bipyridyl complex was readily synthetized and fully characterized, constituing one of the rare examples of photoluminescent metal ylide complexes. Its photophysical and redox properties have been compared with those of related NHC and cyclometalated Ru complexes and exploited in visible-light photocatalyzed SET and EnT processes.

Tuning Tetramethoxy-acridiniums for Fluorophores and Organic Photoredox Catalysis

Tetramethoxy substituted alkyl-acridiniums (TMAcr+) are readily available by facile nucleophilic aromatic substitution on tris(2,6-dimethoxyphenyl)carbenium, but are non-fluorescent, presumably due to intramolecular photoinduced electron transfer quenching. In this work we introduce electron withdrawing groups by electrophilic aromatic substitution reactions, leading to fluorescence turn-on. The acridiniums are moderately fluorescent (φf=20 %) with long fluorescene lifetimes (τf=9 ns). The positive excited state reduction potentials (E*red=+1.6 V) make the TMAcr+ excellent electron acceptors in the excited state, and efficient reductive photoredox catalysts able to oxidize a broad range of substrates.

Two-Dimensional Covalent Organic Frameworks with Carbazole-Embedded Frameworks Facilitate Photocatalytic and Electrocatalytic Processes

Catalytic technologies are pivotal in enhancing energy efficiency, promoting clean energy production, and reducing energy consumption in the chemical industry. The pursuit of novel catalysts for renewable energy is a long-term goal for researchers. In this work, we synthesized three two-dimensional covalent organic frameworks (COFs) featuring electron-rich carbazole-based architectures and evaluated their catalytic performance in photocatalytic organic reactions and electrocatalytic oxygen reduction reactions (ORRs). Pyrene-functionalized COF, termed as FCTD-TAPy, demonstrated excellent photocatalytic performance for amino oxidation coupling and showed a remarkable preference for substrates with electron-withdrawing groups (up to >99% Conv. and >99% Sel). Furthermore, FCTD-TAPy favored a four-electron transfer pathway during the ORR and exhibited favorable reaction kinetics (51.07 mV/dec) and a high turnover frequency (0.011 s-1). In contrast, the ORR of benzothiadiazole-based FCTD-TABT favored a two-electron transfer pathway, which exhibited a maximum double-layer capacitance of 14.26 mF cm-2, a Tafel slope of 53.01 mV/dec, and a hydrogen peroxide generation rate of 70.3 mmol g-1 h-1. This work underscores the potential of carbazole-based COFs as advanced catalytic materials and offers new insights into the design of metal-free COFs for enhanced catalytic performance.

Electron-donor-acceptor (EDA) complex-driven regioselective vicinal and oxidative geminal functionalization of alkynes

A visible-light-initiated electron-donor-acceptor (EDA) complex-driven regioselective vicinal and oxidative geminal thiosulfonylation of alkynes is presented. Organic thiosulfonates act as an acceptor, producing either sulfonyl (RSO2˙) or thiyl (RS˙) radicals under base and solvent switchable conditions. Simultaneous installation of three different functionalities, viz carbonyl, sulfonyl, and thiyl, takes place under one condition, while another condition leads to vicinal thiolation and sulfonylation.

Divergent Enantioselective Access to Diverse Chiral Compounds from Bicyclo[1.1.0]butanes and α,β-Unsaturated Ketones under Catalyst Control

Achieving structural and stereogenic diversity from the same starting materials remains a fundamental challenge in organic synthesis, requiring precise control over the selectivity. Here, we report divergent catalytic methods that selectively yield either cycloaddition or addition/elimination products from bicyclo[1.1.0]butanes and α,β-unsaturated ketones. By employing chiral Lewis acid or Brønsted acid catalysts, we achieved excellent regio-, diastereo-, and enantioselectivity across all three distinct transformations, affording a diverse array of synthetically valuable chiral bicyclo[2.1.1]hexanes and cyclobutenes. The divergent outcomes are controlled by the differential activation of the substrates by the specific chiral catalyst with the reaction conditions dictating the pathway selectivity. This strategy demonstrates the power of divergent catalysis in creating molecular complexity and diversity, offering a valuable tool for the synthesis of enantioenriched chiral building blocks.

Maximizing Photon-to-Electron Conversion for Atom Efficient Photoredox Catalysis

Photoredox catalysis is a powerful tool to access challenging and diverse syntheses. Absorption of visible light forms the excited state catalyst (*PC) but photons may be wasted if one of several unproductive pathways occur. Facile dissociation of the charge-separated encounter complex [PC•-:D•+], also known as (solvent) cage escape, is required for productive chemistry and directly governs availability of the critical PC•- intermediate. Competitive charge recombination, either inside or outside the solvent cage, may limit the overall efficiency of a photochemical reaction or internal quantum yield (defined as the moles of product formed per mole of photons absorbed by PC). Measuring the cage escape efficiency (ϕCE) typically requires time-resolved spectroscopy; however, we demonstrate how to estimate ϕCE using steady-state techniques that measure the efficiency of PC•- formation (ϕPC). Our results show that choice of electron donor critically impacts ϕPC, which directly correlates to improved synthetic and internal quantum yields. Furthermore, we demonstrate how modest structural differences between photocatalysts may afford a sizable effect on reactivity due to changes in ϕPC, and by extension ϕCE. Optimizing experimental conditions for cage escape provides photochemical reactions with improved atom economy and energy input, paving the way for sustainable design of photocatalytic systems.

Cooperative NHC and Photoredox Catalyzed Radical Aminoacylation of Alkenes to Tetrahydropyridazines

Tetrahydropyridazines constitute an important structural motif found in numerous natural products and pharmaceutical compounds. Herein, we report an aminoacylation reaction of alkenes that enables the synthesis of 1,4,5,6-tetrahydropyridazines through cooperative N-heterocyclic carbene (NHC) and photoredox catalysis. This approach involves the 6-endo-trig cyclization of N-centered hydrazonyl radicals, generated via single-electron oxidation of hydrazones, followed by a radical-radical coupling step. The mild process tolerates a wide range of common functional groups and affords a variety of tetrahydropyridazines in moderate to high yields. Preliminary investigations using chiral NHC catalysts demonstrate the potential of this protocol for asymmetric radical reactions.

Ultrathin two-dimensional (2D) manganese-based metal-organic framework nanosheets for selective photocatalytic oxidation of thioether

The efficiency of photocatalysts depends largely on the accessibility of reaction species to the active centre, the electron transfer and geometric matching between the active surface of the catalyst and reaction species. In this work, we successfully synthesized and designed one two-dimensional Mn(II) MOF with [Mn2(H2L1)(H2O)2(DMF)2]n·(CH3CH2OH)n (HSTC 3) by using MnCl2·4H2O and 5,5'-(anthracene-9,10-diyl)diisophthalic acid (H4L1), in which the adjacent layers are stacked with weak interactions, and the huge gap leads to the interpenetration between layers to form a 2D + 2D → 3D interpenetration frame. Based on the particularity of the structure of HSTC 3, ultrasonic wall breaking methods were tried to successfully peel HSTC 3 into nanosheets (HSTC 3-NS), thus achieving a significant improvement in a series of optoelectronic properties due to exposure to more active centres for HSTC 3-NS. These results significantly enhance the photocatalytic selective oxidation of thioether. This study provides a new insight into the post-synthesis modification of MOF photocatalyst and their application in photocatalytic organic synthesis.

Sodium Hypophosphite as a Halogen Atom Transfer (XAT) Agent under Photocatalytic Conditions

The ability of sodium hypophosphite to generate the phosphorus-centered radical, which can activate the carbon-halogen bond via the halogen atom transfer (XAT) is described. The hydroalkylation of nonactivated alkenes with methyl bromoacetate was performed using sodium hypophosphite as reducing agent under photocatalytic conditions. The key phosphorus centered radical is formed from the hypophosphite anion by hydrogen atom abstraction.

Challenges and Future Perspectives in Photocatalysis: Conclusions from an Interdisciplinary Workshop

Photocatalysis is a versatile and rapidly developing field with applications spanning artificial photosynthesis, photo-biocatalysis, photoredox catalysis in solution or supramolecular structures, utilization of abundant metals and organocatalysts, sustainable synthesis, and plastic degradation. In this Perspective, we summarize conclusions from an interdisciplinary workshop of young principal investigators held at the Lorentz Center in Leiden in March 2023. We explore how diverse fields within photocatalysis can benefit from one another. We delve into the intricate interplay between these subdisciplines, by highlighting the unique challenges and opportunities presented by each field and how a multidisciplinary approach can drive innovation and lead to sustainable solutions for the future. Advanced collaboration and knowledge exchange across these domains can further enhance the potential of photocatalysis. Artificial photosynthesis has become a promising technology for solar fuel generation, for instance, via water splitting or CO2 reduction, while photocatalysis has revolutionized the way we think about assembling molecular building blocks. Merging such powerful disciplines may give rise to efficient and sustainable protocols across different technologies. While photocatalysis has matured and can be applied in industrial processes, a deeper understanding of complex mechanisms is of great importance to improve reaction quantum yields and to sustain continuous development. Photocatalysis is in the perfect position to play an important role in the synthesis, deconstruction, and reuse of molecules and materials impacting a sustainable future. To exploit the full potential of photocatalysis, a fundamental understanding of underlying processes within different subfields is necessary to close the cycle of use and reuse most efficiently. Following the initial interactions at the Lorentz Center Workshop in 2023, we aim to stimulate discussions and interdisciplinary approaches to tackle these challenges in diverse future teams.

Counterion Effects in [Ru(bpy)3](X)2-Photocatalyzed Energy Transfer Reactions

Photocatalysis that uses the energy of light to promote chemical transformations by exploiting the reactivity of excited-state molecules is at the heart of a virtuous dynamic within the chemical community. Visible-light metal-based photosensitizers are most prominent in organic synthesis, thanks to their versatile ligand structure tunability allowing to adjust photocatalytic properties toward specific applications. Nevertheless, a large majority of these photocatalysts are cationic species whose counterion effects remain underestimated and overlooked. In this report, we show that modification of the X counterions constitutive of [Ru(bpy)3](X)2 photocatalysts modulates their catalytic activities in intermolecular [2 + 2] cycloaddition reactions operating through triplet-triplet energy transfer (TTEnT). Particularly noteworthy is the dramatic impact observed in low-dielectric constant solvent over the excited-state quenching coefficient, which varies by two orders of magnitude depending on whether X is a large weakly bound (BArF 4 -) or a tightly bound (TsO-) anion. In addition, the counterion identity also greatly affects the photophysical properties of the cationic ruthenium complex, with [Ru(bpy)3](BArF 4)2 exhibiting the shortest 3MLCT excited-state lifetime, highest excited state energy, and highest photostability, enabling remarkably enhanced performance (up to >1000 TON at a low 500 ppm catalyst loading) in TTEnT photocatalysis. These findings supported by density functional theory-based calculations demonstrate that counterions have a critical role in modulating cationic transition metal-based photocatalyst potency, a parameter that should be taken into consideration also when developing energy transfer-triggered processes.

Photoredox Activation of Fluorinated Organozinc Reagents: Hydrofluoroalkylation of Unactivated and Electron Deficient Alkenes

Hydrofluoroalkylation of alkenes with organozinc reagents under photocatalytic conditions is described. The fluorinated alkyl radicals were generated from organozincs by the single electron oxidation of the carbon-zinc bond. The radical addition step is followed either by hydrogen atom transfer for unactivated olefins or by a reduction/protonation sequence for strongly accepting arylidenemalononitriles.

From Nature to Technology: Exploring the Potential of Plant-Based Materials and Modified Plants in Biomimetics, Bionics, and Green Innovations

This review explores the extensive applications of plants in areas of biomimetics and bioinspiration, highlighting their role in developing sustainable solutions across various fields such as medicine, materials science, and environmental technology. Plants not only serve essential ecological functions but also provide a rich source of inspiration for innovations in green nanotechnology, biomedicine, and architecture. In the past decade, the focus has shifted towards utilizing plant-based and vegetal waste materials in creating eco-friendly and cost-effective materials with remarkable properties. These materials are employed in making advancements in drug delivery, environmental remediation, and the production of renewable energy. Specifically, the review discusses the use of (nano)bionic plants capable of detecting explosives and environmental contaminants, underscoring their potential in improving quality of life and even in lifesaving applications. The work also refers to the architectural inspirations drawn from the plant world to develop novel design concepts that are both functional and aesthetic. It elaborates on how engineered plants and vegetal waste have been transformed into value-added materials through innovative applications, especially highlighting their roles in wastewater treatment and as electronic components. Moreover, the integration of plants in the synthesis of biocompatible materials for medical applications such as tissue engineering scaffolds and artificial muscles demonstrates their versatility and capacity to replace more traditional synthetic materials, aligning with global sustainability goals. This paper provides a comprehensive overview of the current and potential uses of living plants in technological advancements, advocating for a deeper exploration of vegetal materials to address pressing environmental and technological challenges.

Toluene Oxidation: CO2 vs Benzaldehyde: Current Status and Future Perspectives

Toluene is a common and significant volatile organic compound (VOC). Although it finds extensive application in various industrial processes (chemical manufacturing, paint and adhesive production, and as a solvent), it creates a huge environmental impact when emitted freely into the atmosphere. Two solutions were found to mitigate the emission of this pollutant: the total oxidation to CO2 and H2O and the selective oxidation into benzaldehyde. This review discusses the two main alternatives for tackling this problem: converting the toluene into carbon dioxide by total oxidation or into benzaldehyde by selective oxidation. It presents new catalytic advances, new trends, and the advantages and disadvantages of both methods.

Samarium-Oxo/Hydroxy Cluster: A Solar Photocatalyst for Chemoselective Aerobic Oxidation of Thiols for Disulfide Synthesis

Oxidation contributes as a secondary driver of the prevailing carbon emission in the chemical industries. To address this issue, photocatalytic aerobic oxidation has emerged as a promising alternative. However, the challenge of achieving satisfactory chemoselectivity and effective use of solar light has hindered progress in this area. In this context, the present study introduces a novel homogeneous photocatalyst, [Sm6O(OH)8(H2O)24]I8(H2O)8 cluster (Sm-OC), via a unique auxiliary ligand-free oxidative hydrolysis. Using Sm-OC as catalyst, a solar photocatalyzed aerobic oxidation of thiols has been developed for the synthesis of valuable disulfides. Remarkably, this catalyst manifested a significant turnover number ≥2000 under tested conditions. Sm-OC-catalyzed aerobic oxidation showcased remarkable chemoselectivity. In thiol oxidations, despite the vulnerability of disulfides toward overoxidation, overoxidized byproducts or oxidation of nontarget functional groups was not detected across all 28 tested substrates. This investigation presents the first application of a lanthanide-oxo/hydroxy cluster in photocatalysis.

Near-infrared photocatalysis with cyanines: synthesis, applications and perspectives

Cyanines are organic dyes bearing two aza-heterocycles linked by a polymethine chain. Excited states, fluorescence, redox activity, and energy transfer are interesting properties of cyanines which have been used by chemists. Moreover, they are easily accessible and highly tunable. For all these reasons, cyanines are often selected for applications like fluorescent probes, phototherapy and photovoltaics. However, considering cyanines as photocatalysts is a new field of investigation and has been sparsely reported in the literature. This field of research has been launched on the basis of near-infrared light photocatalysis. With a deeper NIR light penetration, the irradiation is compatible with biological tissues. Due to the longer wavelengths that are involved, the safety of the operator can be guaranteed. In this perspective review, the photophysical/redox properties of cyanines are reported as well as their preparations and applications in modern synthetic approaches. Finally, recent examples of cyanine-based NIR-photocatalysis are discussed including photopolymerization and organic synthesis.

Photocatalyzed C3-H Nitrosylation of Imidazo[1,2-a]pyridine under Continuous Flow and External Photocatalyst-, Oxidant-, and Additive-Free Conditions

This study reports a protocol for the highly regioselective photocatalyzed C-H nitrosylation of imidazo[1,2-a]pyridine scaffolds at the C3 position under a combination of visible-light irradiation and continuous flow without any external photocatalyst. This protocol involves mild and safe conditions and shows good tolerance to air and water along with excellent functional group compatibility and site selectivity, generating various 3-nitrosoimidazo[1,2-a]pyridines in excellent yields under photocatalyst-, oxidant-, and additive-free conditions.Notably, the proposed nitrosylation reaction, which introduces the chromophore NO into imidazo[1,2-a]pyridine scaffolds, occurs efficiently under visible-light irradiation without any additional photocatalyst owing to the intense light-absorption characteristics of the nitrosylation products. This study could guide future studies on the development of green organic-synthesis strategies with a wide variety of potential applications.

Radical reactions enabled by polyfluoroaryl fragments: photocatalysis and beyond

Polyfluoroarenes have been known for a long time, but they are most often used as fluorinated building blocks for the synthesis of aromatic compounds. At the same time, due to peculiar fluorine effect, they have unique properties that provide applications in various fields ranging from synthesis to materials science. This review summarizes advances in the radical chemistry of polyfluoroarenes, which have become possible mainly with the advent of photocatalysis. Transformations of the fluorinated ring via the C-F bond activation, as well as use of fluoroaryl fragments as activating groups and hydrogen atom transfer agents are discussed. The ability of fluoroarenes to serve as catalysts is also considred.

3D-Printed Eosin Y-Based Heterogeneous Photocatalyst for Organic Reactions

Heterogenization of Eosin Y by 3D-printing and its application in photocatalysis are reported. The approach allows a fine tuning of the photocatalyst morphology and its rapid preparation. Photocatalytic activity was evaluated through model organic reactions involving oxidation, reduction, and photosensitization pathways. The efficiency, recyclability and stability of 3D printed EY is remarkable paving the way to new generation of heterogeneous photocatalysts with a perfect control of their shape and adaptable to any photoreactors.

Guest-Regulated Generation of Reactive Oxygen Species from Porphyrin-Based Multicomponent Metallacages for Selective Photocatalysis

The development of novel materials for highly efficient and selective photocatalysis is crucial for their practical applications. Herein, we employ the host-guest chemistry of porphyrin-based metallacages to regulate the generation of reactive oxygen species and further use them for the selective photocatalytic oxidation of benzyl alcohols. Upon irradiation, the sole metallacage (6) can generate singlet oxygen (1O2) effectively via excited energy transfer, while its complex with C70 (6⊃C70) opens a pathway for electron transfer to promote the formation of superoxide anion (O2⋅-), producing both 1O2 and O2⋅-. The addition of 4,4'-bipyridine (BPY) to complex 6⊃C70 forms a more stable complex (6⊃BPY) via the coordination of the Zn-porphyrin faces of 6 and BPY, which drives fullerenes out of the cavities and restores the ability of 1O2 generation. Therefore, benzyl alcohols are oxidized into benzyl aldehydes upon irradiation in the presence of 6 or 6⊃BPY, while they are oxidized into benzoic acids when 6⊃C70 is employed as the photosensitizing agent. This study demonstrates a highly efficient strategy that utilizes the host-guest chemistry of metallacages to regulate the generation of reactive oxygen species for selective photooxidation reactions, which could promote the utilization of metallacages and their related host-guest complexes for photocatalytic applications.

Tetrazine-Linked Covalent Organic Frameworks With Acid Sensing and Photocatalytic Activity

The first synthesis and comprehensive characterization of two vinyl tetrazine-linked covalent organic frameworks (COF), TA-COF-1 and TA-COF-2, are reported. These materials exhibit high crystallinity and high specific surface areas of 1323 and 1114 m2 g-1. The COFs demonstrate favorable band positions and narrow band gaps suitable for light-driven applications. These advantages enable TA-COFs to act as reusable metal-free photocatalysts in the arylboronic acids oxidation and light-induced coupling of benzylamines. In addition, these TA-COFs show acid sensing capabilities, exhibiting visible and reversible color changes upon exposure to HCl solution, HCl vapor, and NH3 vapor. Further, the TA-COFs outperform a wide range of previously reported COF photocathodes. The tetrazine linker in the COF skeleton represents a significant advancement in the field of COF synthesis, enhancing the separation efficiency of charge carriers during the photoreaction and contributing to their photocathodic properties. TA-COFs can also degrade 5-nitro-1,2,4-triazol-3-one (NTO), an insensitive explosive present in industrial wastewater, in 20 min in a sunlight-driven photocatalytic process; thus, revealing dual functionality of the protonated TA-COFs as both photodegradation and Brønsted acid catalysts. This pioneering work opens new avenues for harnessing the potential of the tetrazine linker in COF-based materials, facilitating advances in catalysis, sensing, and other related fields.

Ultra-photostable small-molecule dyes facilitate near-infrared biophotonics

Long-wavelength, near-infrared small-molecule dyes are attractive in biophotonics. Conventionally, they rely on expanded aromatic structures for redshift, which comes at the cost of application performance such as photostability, cell permeability, and functionality. Here, we report a ground-state antiaromatic strategy and showcase the concise synthesis of 14 cationic aminofluorene dyes with mini structures (molecular weights: 299-504 Da) and distinct spectra covering 700-1600 nm. Aminofluorene dyes are cell-permeable and achieve rapid renal clearance via a simple 44 Da carboxylation. This accelerates optical diagnostics of renal injury by 50 min compared to existing macromolecular approaches. We develop a compact molecular sensing platform for in vivo intracellular sensing, and demonstrate the versatile applications of these dyes in multispectral fluorescence and optoacoustic imaging. We find that aromaticity reversal upon electronic excitation, as indicated by magnetic descriptors, not only reduces the energy bandgap but also induces strong vibronic coupling, resulting in ultrafast excited-state dynamics and unparalleled photostability. These results support the argument for ground-state antiaromaticity as a useful design rule of dye development, enabling performances essential for modern biophotonics.

Mechanophotocatalysis: A Generalizable Approach to Solvent-minimized Photocatalytic Reactions for Organic Synthesis

This proof-of-concept study cements the viability and generality of mechanophotocatalysis, merging mechanochemistry and photocatalysis to enable solvent-minimized photocatalytic reactions. We demonstrate the transmutation of four archetypal solution-state photocatalysis reactions to a solvent-minimized environment driven by the combined actions of milling, light, and photocatalysts. The chlorosulfonylation of alkenes and the pinacol coupling of aldehydes and ketones were conducted under solvent-free conditions with competitive or superior efficiencies to their solution-state analogues. Furthermore, decarboxylative alkylations are shown to function efficiently under solvent-minimized conditions, while the photoinduced energy transfer promoted [2+2] cycloaddition of chalcone experiences a significant initial rate enhancement over its solution-state variant. This work serves as a platform for future discoveries in an underexplored field: validating that solvent-minimized photocatalysis is not only generalizable and competitive with solution-state photocatalysis, but can also offer valuable advantages.

Photochemistry in Medicinal Chemistry and Chemical Biology

Photochemistry has emerged as a transformative force in organic chemistry, significantly expanding the chemical space accessible for medicinal chemistry. Light-induced reactions enable the efficient synthesis of intricate organic structures and have found applications throughout the different stages of the drug discovery and development processes. Moreover, photochemical techniques provide innovative solutions in chemical biology, allowing precise spatiotemporal drug activation and targeted delivery. In this Perspective, we highlight the already numerous remarkable applications and the even more promising future of photochemistry in medicinal chemistry and chemical biology.

Energy transfer photocatalysis: exciting modes of reactivity

Excited (triplet) states offer a myriad of attractive synthetic pathways, including cycloadditions, selective homolytic bond cleavages and strain-release chemistry, isomerizations, deracemizations, or the fusion with metal catalysis. Recent years have seen enormous advantages in enabling these reactivity modes through visible-light-mediated triplet-triplet energy transfer catalysis (TTEnT). This tutorial review provides an overview of this emerging strategy for synthesizing sought-after organic motifs in a mild, selective, and sustainable manner. Building on the photophysical foundations of energy transfer, this review also discusses catalyst design, as well as the challenges and opportunities of energy transfer catalysis.

Electrophotocatalytic hydrogenation of imines and reductive functionalization of aryl halides

The open-shell catalytically active species, like radical cations or radical anions, generated by one-electron transfer of precatalysts are widely used in energy-consuming redox reactions, but their excited-state lifetimes are usually short. Here, a closed-shell thioxanthone-hydrogen anion species (3), which can be photochemically converted to a potent and long-lived reductant, is generated under electrochemical conditions, enabling the electrophotocatalytic hydrogenation. Notably, TfOH can regulate the redox potential of the active species in this system. In the presence of TfOH, precatalyst (1) reduction can occur at low potential, so that competitive H2 evolution can be inhibited, thus effectively promoting the hydrogenation of imines. In the absence of TfOH, the reducing ability of the system can reach a potency even comparable to that of Na0 or Li0, thereby allowing the hydrogenation, borylation, stannylation and (hetero)arylation of aryl halides to construct C-H, C-B, C-Sn, and C-C bonds.

Novel applications of photobiocatalysts in chemical transformations

Photocatalysis has proven to be an effective approach for the production of reactive intermediates under moderate reaction conditions. The possibility for the green synthesis of high-value compounds using the synergy of photocatalysis and biocatalysis, benefiting from the selectivity of enzymes and the reactivity of photocatalysts, has drawn growing interest. Mechanistic investigations, substrate analyses, and photobiocatalytic chemical transformations will all be incorporated in this review. We seek to shed light on upcoming synthetic opportunities in the field by precisely describing mechanistically unique techniques in photobiocatalytic chemistry.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Direct conversion of carboxylic acids to free thiols via radical relay acridine photocatalysis enabled by N-O bond cleavage

Carboxylic acids and thiols are basic chemical compounds with diverse utility and widespread reactivity. However, the direct conversion of unprotected acids to thiols is hampered due to a fundamental problem - free thiols are incompatible with the alkyl radicals formed on decarboxylation of carboxylic acids. Herein, we describe a concept for the direct photocatalytic thiolation of unprotected acids allowing unprotected thiols and their derivatives to be obtained. The method is based on the application of a thionocarbonate reagent featuring the N-O bond. The reagent serves both for the rapid trapping of alkyl radicals and for the facile regeneration of the acridine-type photocatalyst.

Enzymatic Photodecarboxylation on Secondary and Tertiary Carboxylic Acids

Photoenzymatic decarboxylation of bulky secondary and tertiary carboxylic acids catalyzed by engineered Chlorella variabilis fatty acid photodecarboxylase (CvFAP) is reported. Rational design and directed evolution of wild-type CvFAP are used to improve the reactivity and expand potential applications. Moreover, engineered CvFAP can catalyze light-driven kinetic resolution of α-substituted carboxylic acid. Our work sheds light on the production of chiral building blocks and bioactive molecules from bulky carboxylic acids via the photoenzymatic way.

Second Generation of Near-Infrared Cyanine-Based Photocatalysts for Faster Organic Transformations

A second generation of cyanine-based near-infrared photocatalysts has been developed to accelerate organic transformations. Cyanines were prepared and fully characterized prior to evaluation of their photocatalytic activities. Catalyst efficiency was determined by using two model oxidation and reduction reactions. For the aza-Henry reaction, cyanines bearing an amino group on the heptamethine chain led to the best results. For trifluoromethylation, the stability of the photocatalyst was found to be the key parameter for efficient and rapid conversion.

Coupling chemistry and biology for the synthesis of advanced bioproducts

Chemical and biological syntheses can both lead to a myriad of compounds. Biology enables us to harness the metabolism of microbial cell factories to produce key target molecules from renewable biomass-derived substrates. Although bio-based feedstocks are sustainably sourced and more benign than the rapidly depleting fossil fuels that chemical processes have historically relied on, limiting pathways solely to biological reactions may not equate to a greener process overall. In fact, bioreactors rely on substantial quantities of water and can be inefficient since organisms typically operate around ambient conditions and are sensitive to perturbations in their environment. Hybridizing biosynthetic pathways with green chemistry can instead be a more potent strategy to reduce our net manufacturing footprint. Emerging chemistries have demonstrated considerable success in performing complex transformations on biological feedstocks without significant solvent use. Many of these transformations would be too slow to perform enzymatically or infeasible altogether. Here, we put forth the concept that by carefully considering the merits and drawbacks of synthetic biology and chemistry as well as one's own use case, there exist many opportunities for coupling the two. Merging these syntheses can unlock a wider suite of functional group transformations, thereby enabling future manufacturing processes to sustainably access a larger space of valuable, platform chemicals.

Development and application of decatungstate catalyzed C-H 18F- and 19F-fluorination, fluoroalkylation and beyond

Over the past few decades, photocatalytic C-H functionalization reactions have received increasing attention due to the often mild reaction conditions and complementary selectivities to conventional functionalization processes. Now, photocatalytic C-H functionalization is a widely employed tool, supporting activities ranging from complex molecule synthesis to late-stage structure-activity relationship studies. In this perspective, we will discuss our efforts in developing a photocatalytic decatungstate catalyzed C-H fluorination reaction as well as its practical application realized through collaborations with industry partners at Hoffmann-La Roche and Merck, and extension to radiofluorination with radiopharmaceutical chemists and imaging experts at TRIUMF and the BC Cancer Agency. Importantly, we feel that our efforts address a question of utility posed by Professor Tobias Ritter in "Late-Stage Fluorination: Fancy Novelty or Useful Tool?" (ACIE, 2015, 54, 3216). In addition, we will discuss decatungstate catalyzed C-H fluoroalkylation and the interesting electrostatic effects observed in decatungstate-catalyzed C-H functionalization. We hope this perspective will inspire other researchers to explore the use of decatungstate for the purposes of photocatalytic C-H functionalization and further advance the exploitation of electrostatic effects for both rate acceleration and directing effects in these reactions.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.