Non-Noble Plasmonic Metal-Based Photocatalysts

In-situ designed Bi metal @ defective Bi2O2SO4 to enhance photocatalytic NO removal via boosted directional interfacial charge transfer

Photocatalytic technology provides a new approach for the harmless treatment of low concentration NOx in the atmosphere. The development of high-performance semiconductor materials to improve the light absorption efficiency and the separation efficiency of photogenerated carriers is the focus of the research. Bismuth oxybismuth sulfate (Bi2O2SO4) shows significant potential for photocatalytic NOx purification due to its unique electronic and layered structure. However, its wide bandgap limits light absorption efficiency in the visible region, resulting in an undesirable photocatalytic activity. The surface plasmon resonance effect presents an effective strategy to enhance the catalytic activity of wide bandgap semiconductors under visible light. In this study, metal Bi loaded Bi2O2SO4 photocatalysts with abundant oxygen vacancies (OVs) were prepared by in-situ reduction with NaBH4, which exhibited a significantly enhanced visible-light catalytic purification of NO. The OVs not only induced the formation of intermediate energy levels and reduced the bandgap, but also enhanced the visible-light absorption ability of Bi2O2SO4 and promoted carrier separation. The Bi metal also promoted the carrier separation and provided more hot electrons for the activation of small molecules to generate reactive radicals, which facilitated the photocatalytic reaction. The photocatalytic NO purification pathway and its performance enhancement mechanism were investigated by combining theoretical calculations and in-situ infrared characterization. This work provides new insights for the development and design of novel Bi-based semiconductors and new materials for the application of low concentration NOx photocatalytic purification process.

Unlocking the catalytic potential of heterogeneous nonprecious metals for selective hydrogenation reactions

Selective hydrogenation has been employed extensively to produce value-added chemicals and fuels, greatly alleviating the problems of fossil resources and green synthesis. However, the design and synthesis of highly efficient catalysts, especially those that are inexpensive and abundant in the earth's crust, is still required for basic research and subsequent industrial applications. In recent years, many studies have revealed that the rational design and synthesis of heterogeneous catalysts can efficaciously improve the catalytic performance of hydrogenation reactions. However, the relationship between nonprecious metal catalysts and hydrogenation performance from the perspective of different catalytic systems still remains to be understood. In this review, we provide a comprehensive and systematic overview of the recent advances in the synthesis of nonprecious metal catalysts for heterogeneous selective hydrogenation reactions including thermocatalytic hydrogenation/transfer hydrogenation, photocatalytic hydrogenation and electrocatalytic reduction. In addition, we also aim to provide a clear picture of the recent design strategies and proposals for the nonprecious metal catalysed hydrogenation reactions. Finally, we discuss the current challenges and future research opportunities for the precise design and synthesis of nonprecious metal catalysts for selective hydrogenation reactions.

Study of two-dimensional information writing, reading and error correction at micro/nanoscale based on gold nanosphere arrays

Surface plasmon driven photocatalytic reactions have great potential for information encryption as well as information security. In this paper, explored the detection concentrations of dye molecule Rhodamine6G (R6G) on three substrates, where complete original Raman spectra signals were still obtained at a concentration of 10-8 M. Utilized photosensitive molecules to investigate the photocatalytic characteristics of 4-nitrobenzenethiol (4-NBT) on three substrates. Excitation light at a wavelength of 633 nm enables local photocatalytic for information signals writing, while 785 nm wavelength excitation light combined with two-dimensional Mapping technology is used for information signal reading. Read information signals are often prone to reading errors due to their own lack of resolution or strong interference from back bottom signals, so error correction processing of information signals is essential. Through comparative exploration, it is found that the ratio method can obtain high-precision and high-resolution information signals, and the interference of the background signals were well suppressed. Leveraging the advantages of Raman fingerprint spectra at the micro/nanoscale, it solves the challenge of incomplete information signals presentation at smaller scales. Additionally, through error correction processing of the information signals, high precision and high-resolution information signals are obtained.

Atomically Precise Cu Nanoclusters: Recent Advances, Challenges, and Perspectives in Synthesis and Catalytic Applications

Atomically precise metal nanoclusters are an emerging type of nanomaterial which has diverse interfacial metal-ligand coordination motifs that can significantly affect their physicochemical properties and functionalities. Among that, Cu nanoclusters have been gaining continuous increasing research attentions, thanks to the low cost, diversified structures, and superior catalytic performance for various reactions. In this review, we first summarize the recent progress regarding the synthetic methods of atomically precise Cu nanoclusters and the coordination modes between Cu and several typical ligands and then discuss the catalytic applications of these Cu nanoclusters with some explicit examples to explain the atomical-level structure-performance relationship. Finally, the current challenges and future research perspectives with some critical thoughts are elaborated. We hope this review can not only provide a whole picture of the current advances regarding the synthesis and catalytic applications of atomically precise Cu nanoclusters, but also points out some future research visions in this rapidly booming field.

Deciphering the Photocatalysis Mechanism of Semimetallic Bismuth Nanoparticles

Metallic nanoparticle photocatalysts have been developed in various catalytic systems over the past few decades, including diverse noble and non-noble metals with plasmonic properties. The hot-carrier-induced mechanism is one of the most appealing pathways as it can provide energetic electrons or holes for driving thermodynamically unfavorable reactions or increasing the reaction rate. In this work, we evaluate the photocatalytic performance of semimetallic bismuth nanoparticles and offer detailed mechanistic interpretations in terms of hot carriers and interband transitions. The photocatalyzed nitrophenol reduction with sodium borohydride serves as a model reaction, and a wavelength-dependent study reveals the contribution of hot carriers. It is demonstrated that light irradiation under shorter wavelengths could produce deeper hot holes in bismuth nanoparticles, which can be quenched more effectively by hole scavengers, thus facilitating the electron-transfer process and resulting in larger apparent reaction rate constants. The observed photocatalysis enhancement accounts for the unique band structure with an extremely small band gap and exclusive interband absorption in the visible region. This proof-of-concept work offers a different perspective on the photocatalysis mechanism of bismuth nanoparticles and could help us better understand the role of hot carriers involved in photocatalysis, especially with interband transitions.

Anchoring Perovskite-Like Bi4Ti3O12 and Plasmonic Bi on Defect-Rich Yellow TiO2-x for Enhanced Catalytic Activity toward Degradation of Pollutants upon Visible Light

The efficiency of heterogeneous photocatalytic processes is currently limited due to the fast recombination of photocarriers, poor light absorption, and inefficient surface catalytic characteristics. In this study, defect-rich yellow TiO2-x nanoparticles (abbreviated as D-TiO2) with high surface area and significant absorption in the visible range were integrated with perovskite-like Bi4Ti3O12 to synthesize binary D-TiO2/Bi4Ti3O12 nanocomposites. To overcome the problem of insufficient activity, we integrated the optimized D-TiO2/Bi4Ti3O12 nanocomposite with plasmonic Bi nanoparticles. Significantly, the optimized D-TiO2/Bi4Ti3O12/Bi-2 nanocomposite efficiently removed tetracycline (TC) in 50 min through production of •OH, h+, and •O2- species, whose removal rate promoted 10.6, 3.18, 5.01, and 1.84 compared with the white TiO2 (abbreviated as W-TiO2), D-TiO2, Bi4Ti3O12, and D-TiO2/Bi4Ti3O12 (20%) photocatalysts, respectively. The outstanding performance of the D-TiO2/Bi4Ti3O12/Bi photocatalyst was attributed to its quantum dot size, low resistance for charge migration, increased surface area, oxygen vacancies in D-TiO2, and developed n-n heterojunction among D-TiO2 and Bi4Ti3O12, which accelerated charge transfer and promoted the generation of active species. Furthermore, the stability tests showed that the TC degradation efficiency still reached 96% after four recycles, indicating the remarkable stability of the photocatalyst. Eventually, the biocompatible nature of the treated solution over the optimized photocatalyst was also revealed from an investigation of the growth of lentil seeds.

Full-spectrum plasmonic semiconductors for photocatalysis

Localized surface plasmon resonance (LSPR) of noble metal nanoparticles can focus surrounding light onto the particle surface to boost photochemical reactions and solar energy utilization. However, the rarity and high cost of noble metals limit their applications in plasmonic photocatalysis, forcing researchers to seek low-cost alternatives. Recently, some heavily doped semiconductors with high free carrier density have garnered attention due to their metal-like LSPR properties. However, plasmonic semiconductors have complex surface structures characterized by the presence of a depletion layer, which poses challenges for active site exposure and hot carrier transfer, resulting in low photocatalytic activity. In this review, we introduce the essential characteristics and types, synthesis methods, and characterization techniques of full-spectrum plasmonic semiconductors, elucidate the mechanism of full-spectrum nonmetallic plasmonic photocatalysis, including the local electromagnetic field, hot carrier generation and transfer, the photothermal effect, and the solutions for the surface depletion layer, and summarize the applications of plasmonic semiconductors in photocatalytic environmental remediation, CO2 reduction, H2 generation, and organic transformations. Finally, we provide a perspective on full-spectrum plasmonic photocatalysis, aiming to guide the design and development of plasmonic photocatalysts.

Surface Plasmon Resonance-Mediated Photocatalytic H2 Generation

The limited yield of H2 production has posed a significant challenge in contemporary research. To address this issue, researchers have turned to the application of surface plasmon resonance (SPR) materials in photocatalytic H2 generation. SPR, arising from collective electron oscillations, enhances light absorption and facilitates efficient separation and transfer of electron-hole pairs in semiconductor systems, thereby boosting photocatalytic H2 production efficiency. However, existing reviews predominantly focus on SPR noble metals, neglecting non-noble metals and SPR semiconductors. In this review, we begin by elucidating five different SPR mechanisms, covering hot electron injection, electric field enhancement, light scattering, plasmon-induced resonant energy transfer, and photo-thermionic effect, by which SPR enhances photocatalytic activity. Subsequently, a comprehensive overview follows, detailing the application of SPR materials-metals, non-noble metals, and SPR semiconductors-in photocatalytic H2 production. Additionally, a personal perspective is offered on developing highly efficient SPR-based photocatalysis systems for solar-to-H2 conversion in the future. This review aims to guide the development of next-gen SPR-based materials for advancing solar-to-fuel conversion.

Exploring Geometric Chirality in Nanocrystals for Boosting Solar-to-Hydrogen Conversion

Advancing catalyst design is pivotal for the enhancement of photocatalytic processes in renewable energy conversion. The incorporation of structural chirality into conventional inorganic solar hydrogen nanocatalysts promises a significant transformation in catalysis, a feature absent in this field. Here we unveil the unexplored potential of geometric chirality by creating a chiral composite that integrates geometric chiral Au nanoparticles (NPs) with two-dimensional C3N4 nanosheets, significantly boosting photocatalytic H2 evolution beyond the achiral counterparts. The superior performance is driven by the geometric chirality of Au NPs, which facilitates efficient charge carrier separation through the favorable C3N4-chiral Au NP interface and chiral induced spin polarization, and exploits high-activity facets within the concave surfaces of chiral Au NPs. The resulting synergistic effect leads to a remarkable increase in photocatalytic H2 evolution, with an apparent quantum yield of 44.64 % at 400 nm. Furthermore, we explore the selective polarized photo-induced carrier separation behavior, revealing a distinct chiral-dependent photocatalytic HER performance. Our work advances the design and utilization of chiral inorganic nanostructures for superior performance in energy conversion processes.

A high-flux, photocatalytic wood-derived filter for high-efficiency water purification

Wastewater purification has evolved into a global problem in the face of increasing scarcity of freshwater resources. Photocatalysis technology possesses prominent advantages in treating pollutants in water because of its low cost and mild reaction conditions, which provides an effective way to treat multiple pollutants and reduce membrane fouling. Herein, we combine photocatalysis technology with filtration technology via in situ reduction Bi0 with Bi2SiO5 strategy incorporating a carbonized wood filter to synthesize carbon/Bi2SiO5@Bi bi-functional composite. Thus, simultaneous filtration and photocatalytic degradation of Rhodamine B and tetracycline were achieved. After filtrating for 30 min, the degradation rate of RhB and TC were 94.23 % and 81.39 %, respectively. Especially, the flux of RhB and TC were up to 2162.16 L m-2 h-1 and 1811.32 L m-2 h-1. In addition, the composite filter also has good recyclability and reusability, after 5 cycles, the degradation efficiency of RhB remains at 91 %. This study utilized photocatalytic technology combined with membrane filtration technology to successfully solve the contradiction between catalytic efficiency and water flux, which realized rapid and dynamic removal of organic pollutants from water. Besides, the use of carbonized wood-based materials provides a potential biomass technology for the preparation of bifunctional photocatalytic filters.

Plasmonic group IVB transition metal nitrides: Fabrication methods and applications in biosensing, photovoltaics and photocatalysis

This review paper focuses on group IVB transition metal nitrides (TMNs) such as titanium nitride (TiN), zirconium nitride (ZrN), and hafnium nitride (HfN) and as alternative plasmonic materials to noble metals like gold and silver. It delves into the fabrication methods of these TMNs, particularly emphasizing thin film fabrication techniques like magnetron sputtering and atomic layer deposition, as well as nanostructure fabrication processes applied to these thin films. Overcoming the current fabrication and application-related challenges requires a deep understanding of the material properties, deposition techniques, and application requirements. Here, we discuss the impact of fabrication parameters on the properties of resulting films, highlighting the importance of aligning fabrication methods with practical application requirements for optimal performance. Additionally, we summarize and tabulate the most recent plasmonic applications of these TMNs in fields like biosensing, photovoltaic energy, and photocatalysis, contributing significantly to the current literature by consolidating knowledge on TMNs.

Base on photothermal interfacial molecular transfer for efficient biodiesel catalysis via enzyme@cyclodextrin metal-organic frameworks loaded MXene

Efficient, green and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Therefore, we construct a new strategy with photothermal interfacial molecular transfer for green and efficient biodiesel catalysis. We encapsulate Candida albicans lipase B (CalB) in a γ-cyclodextrin metal-organic framework (γ-CD-MOF) loading with Ti3C2TX by in situ growth and electrostatic assembly. The γ-CD-MOF not only protects the fragile enzyme, but also enhances the catalytic performance through the synergistic effects of porous adsorption (MOF pore structure) and interfacial enrichment (cyclodextrins host-guest assembly structure) for accelerating substrate transfer (642.6 %). The CalB@γ-CD-MOF/MXene-i activity can be regulated up to 274.6 % by exposure to near-infrared (NIR). Importantly, CalB@γ-CD-MOF/MXene-i achieves 93.3 % biodiesel conversion under NIR and maintained 86.9 % activity after 6 cycles. Meanwhile, the MXene after the CalB@γ-CD-MOF/MXene catalytic cycle can be almost completely recovered. We verify the mechanism of high catalytic activity of γ-CD-MOF and rationalize the mechanism of CD molecular channel by DFT. Therefore, this highly selective enzyme catalytic platform offers new possibilities for green and efficient preparation of bioenergy.

0D/2D heterojunction constructed by Ag2S quantum dots anchored on graphdiyne (g-CnH2n-2) nanosheets for wide spectrum photocatalytic H2 evolution

Precisely crafting heterojunctions for efficient charge separation is a major obstacle in the realm of photocatalytic hydrogen evolution. A 0D/2D heterojunction was successfully fabricated by anchoring Ag2S quantum dots (Ag2S QDs) onto graphdiyne (GDY) nanosheets (Ag2S QDs/GDY) using a straightforward physical mixing technique. This unique structure allows for excellent contact between GDY and Ag2S QDs, thereby enhancing the rate of charge transfer. The light absorption capabilities of Ag2S QDs/GDY extend up to 1200 nm, enabling strong absorption of light, including infrared. Through DFT calculations and in-situ XPS analysis, it was demonstrated that incorporating Ag2S QDs onto GDY effectively modulates the electronic structure, promotes an internal electric field, and facilitates directional electron transfer. This directed electron transfer enhances the utilization of electrons by GDY and Ag2S QDs, with the added benefit of Ag2S QDs serving as electron reservoirs for efficient photocatalytic hydrogen evolution. A 7 %Ag2S QDs/GDY composite exhibited impressive efficiency and stable performance in photocatalytic hydrogen evolution (2418 μmol g-1 h-1), which is much higher than that of GDY and Ag2S QDs. This study conclusively demonstrates that the 0D/2D heterojunction formed by GDY and Ag2S QDs can establish high-quality contact and efficient charge transfer, ultimately enhancing photocatalytic performance.

Photocatalyst-free, visible-light-induced regio- and stereoselective synthesis of phosphorylated enamines from N-allenamides via [1,3]-sulfonyl shift at room temperature

Herein, we report the first visible-light-induced strategy for the rapid synthesis of densely functionalized α- and γ-phosphorylated β-sulfonyl enamines in a regio- and stereoselective manner from N-sulfonyl allenamides and H-phosphine oxides. The transformation displays a broad substrate scope, while operating at room temperature under photocatalyst- and additive-free conditions. In this atom-economical process, either terminal or substituted N-sulfonyl allenamides trigger an unprecedented N-to-C [1,3]-sulfonyl shift, relying on a dual radical allyl resonance and α-heteroatom effect in its triplet excited state. A plausible reaction mechanism is proposed which was supported by the outcomes of theoretical approaches based on Density Functional Theory (DFT) calculations.

LSPR-enhanced photoresponsive antibacterial efficiency of Bi/MoS2-loaded fibrin gel for management of diabetic wounds

Chronic diabetic wounds present formidable challenges, marked by uncontrolled bacterial infections, prolonged inflammation, and impaired angiogenesis. The evolving landscape of photo-responsive antibacterial therapy holds great promise in addressing these multifaceted issues, with a particular focus on leveraging the distinctive properties of 2D heterojunction materials. In this investigation, we engineered composite sprayed hydrogels, seamlessly integrating Bi/MoS2 nano-heterojunctions. Capitalizing on the synergistic interplay between photocatalytic antibacterial and photothermal antibacterial mechanisms, the Bi/MoS2 heterojunction, guided by its localized surface plasmon resonance, demonstrated outstanding antibacterial efficacy within a mere 10-minute exposure to 808 nm near-infrared light. This accelerated sterilization both in vitro and in vivo, consequently expediting wound healing. The sprayed composite gel not only furnishes protective shielding for skin tissues but also fosters endothelial cell proliferation, vascularization, and angiogenesis. This safe and ultrafast sterilizing hydrogel presents immense potential for application in antimicrobial dressings, thereby offering a promising avenue for diabetic wound healing.

Ultrathin two-dimensional (2D) manganese-based metal-organic framework nanosheets for selective photocatalytic oxidation of thioether

The efficiency of photocatalysts depends largely on the accessibility of reaction species to the active centre, the electron transfer and geometric matching between the active surface of the catalyst and reaction species. In this work, we successfully synthesized and designed one two-dimensional Mn(II) MOF with [Mn2(H2L1)(H2O)2(DMF)2]n·(CH3CH2OH)n (HSTC 3) by using MnCl2·4H2O and 5,5'-(anthracene-9,10-diyl)diisophthalic acid (H4L1), in which the adjacent layers are stacked with weak interactions, and the huge gap leads to the interpenetration between layers to form a 2D + 2D → 3D interpenetration frame. Based on the particularity of the structure of HSTC 3, ultrasonic wall breaking methods were tried to successfully peel HSTC 3 into nanosheets (HSTC 3-NS), thus achieving a significant improvement in a series of optoelectronic properties due to exposure to more active centres for HSTC 3-NS. These results significantly enhance the photocatalytic selective oxidation of thioether. This study provides a new insight into the post-synthesis modification of MOF photocatalyst and their application in photocatalytic organic synthesis.

Heterogeneous CuS QDs/BiVO4@Y2O2S Nanoreactor for Monitorable Photocatalysis

Exploration of multifunctional integrated catalysts is of great significance for photocatalysis toward practical application. Herein, a 1D confined nanoreactor with a heterogeneous core-shell structure is designed for synergies of efficient catalysis and temperature monitoring by custom encapsulation of Z-scheme heterojunction CuS quantum dots/BiVO4 (CuS QDs/BiVO4) and Y2O2S-Er, Yb. The dispersed active sites created by the QDs with high surface energy improve the mass transfer efficiency, and the efficient electron transport channels at the heterogeneous interface extend the carrier lifetime, which endows the nanoreactor with excellent catalytic performance. Meanwhile, real-time temperature monitoring is realized based on the thermally coupled levels 2H11/2/4S3/2→4I15/2 of Er3+ using fluorescence intensity ratio, which enables the monitorable photocatalysis. Furthermore, the nanoreactor with a multidimensional structure increases effective intermolecular collisions to facilitate the catalytic process by restricting the reaction within distinct enclosed spaces and circumvents potential unknown interaction effects. The design of multi-space nanoconfined reactors opens up a new avenue to modulate catalyst function, providing a unique perspective for photocatalytic applications in the mineralization of organic pollutants, hydrogen production, and nitrogen fixation.

Carbon-coated nickel phosphide enhances efficiently electron transfer of cadmium sulfide for photocatalytic hydrogen production

The capacitance of a co-catalyst can be likened to a "double-edged sword". Α co-catalysts with high capacitance can store photoexcited electrons, thereby facilitating charge separation within the host catalyst. However, this property simultaneously restricts electron release. Both effects are enhanced with an increasing capacitance value, implying that excessively high capacitance can significantly hinder the photocatalytic hydrogen (H2) production reaction. Herein, we have designed a metal-organic framework (MOF) -derived carbon-coated nickel phosphide (C-Ni5P4) as the co-catalyst of cadmium sulfide (CdS). When C-Ni5P4 and CdS are closely interconnected, electrons spontaneously migrate from CdS to C-Ni5P4 under irradiation due to the higher work function (WF) of C-Ni5P4 compared to CdS. Most importantly, although the WF of C-Ni5P4 is 0.1 eV lower than that of Ni5P4, its specific capacitance (1.2 mF/cm2) is also lower than that of Ni5P4 (1.3 mF/cm2). This difference dramatically promotes electron release. Thereby exerting a strong positive effect on capacitance catalysis. Therefore, 7% C-Ni5P4/CdS exhibits exceptional cyclic stability and has a remarkably high activity level of 12283 μmol/h/g and 3.8 times as many as 3.0 %Ni5P4/CdS. This study provides a theoretical basis for the advancement of photocatalysts with high efficiency in H2 production and is expected to be applied in other fields of photocatalysis.

Reversible Modulation of Plasmonic Coupling of Gold Nanoparticles Confined within Swellable Polymer Colloidal Spheres

Dynamic optical modulation in response to stimuli provides exciting opportunities for designing novel sensing, actuating, and authentication devices. Here, we demonstrate that the reversible swelling and deswelling of crosslinked polymer colloidal spheres in response to pH and temperature changes can be utilized to drive the assembly and disassembly of the embedded gold nanoparticles (AuNPs), inducing their plasmonic coupling and decoupling and, correspondingly, color changes. The multi-responsive colloids are created by depositing a monolayer of AuNPs on the surface of resorcinol-formaldehyde (RF) nanospheres, then overcoating them with an additional RF layer, followed by a seeded growth process to enlarge the AuNPs and reduce their interparticle separation to induce significant plasmonic coupling. This configuration facilitates dynamic modulation of plasmonic coupling through the reversible swelling/deswelling of the polymer spheres in response to pH and temperature changes. The rapid and repeatable transitions between coupled and decoupled plasmonic states of AuNPs enable reversible color switching when the polymer spheres are in colloidal form or embedded in hydrogel substrates. Furthermore, leveraging the photothermal effect and stimuli-responsive plasmonic coupling of the embedded AuNPs enables the construction of hybrid hydrogel films featuring switchable anticounterfeiting patterns, showcasing the versatility and potential of this multi-stimuli-responsive plasmonic system.

Direct conversion of CO2 to CH4 on Pd/graphdiyne single-crystalline

A major impediment to the development of the efficient use of artificial photosynthesis is the lack of highly selective and efficient photocatalysts toward the conversion of CO2 by sunlight energy at room temperature and ambient pressure. After many years of hard work, we finally completed the synthesis of graphdiyne-based palladium quantum dot catalysts containing high-density metal atom steps for selective artificial photosynthesis. The well-designed interface structure of the catalyst is composed of electron-donor and acceptor groups, resulting in the obvious incomplete charge-transfer phenomenon between graphdiyne and plasmonic metal nanostructures on the interface. These intrinsic characteristics are the origin of the high performance of the catalyst. Studies on its mechanism reveal that the synergism between 'hot electron' from local surface plasmon resonance and rapid photogenerated carrier separation at the ohmic contact interface accelerates the multi-electron reaction kinetics. The catalyst can selectively synthesize CH4 directly from CO2 and H2O with selectivity of near 100% at room temperature and pressure, and exhibits transformative performance, with an average CH4 yield of 26.2 μmol g-1 h-1 and remarkable long-term stability.

Plasmonic Near-Infrared-Response S-Scheme ZnO/CuInS2 Photocatalyst for H2O2 Production Coupled with Glycerin Oxidation

Solar fuel synthesis is intriguing because solar energy is abundant and this method compensates for its intermittency. However, most photocatalysts can only absorb UV-to-visible light, while near-infrared (NIR) light remains unexploited. Surprisingly, the charge transfer between ZnO and CuInS2 quantum dots (QDs) can transform a NIR-inactive ZnO into a NIR-active composite. This strong response is attributed to the increased concentration of free charge carriers in the p-type semiconductor at the interface after the charge migration between ZnO and CuInS2, enhancing the localized surface plasmon resonance (LSPR) effect and the NIR response of CuInS2. As a paradigm, this ZnO/CuInS2 heterojunction is used for H2O2 production coupled with glycerin oxidation and demonstrates supreme performance, corroborating the importance of NIR response and efficient charge transfer. Mechanistic studies through contact potential difference (CPD), Hall effect test, and finite element method (FEM) calculation allow for the direct correlation between the NIR response and charge transfer. This approach bypasses the general light response issues, thereby stepping forward to the ambitious goal of harnessing the entire solar spectrum.

Enhanced photocatalytic activity of magnetically recyclable spherical Fe3O4/Cu2O S-scheme heterojunction

In this study, magnetically recyclable spherical Fe3O4/Cu2O particles comprising S-scheme heterojunctions were prepared by a simple hydrothermal approach using n-type semiconductor Fe3O4 as precursor and p-type semiconductor Cu2O. A Fenton-like system was thus constructed via the addition to Fe3O4/Cu2O of hydrogen peroxide. A rhodamine B (RhB) solution was used to simulate polluted wastewater, and photocatalytic RhB removal experiments were conducted under visible light irradiation. Powder X-ray diffractometry, vibrating-sample magnetometry, nitrogen adsorption-desorption, transmission electron microscopy, and X-ray photoelectron spectroscopy experiments were conducted to characterise Fe3O4 and Fe3O4/Cu2O composite. The band gap of Fe3O4/Cu2O was 1.76 eV, narrower than that of Fe3O4 (2.14 eV). The effects of the pH, sample dosage, hydrogen peroxide concentration, and RhB initial concentration on RhB removal were investigated. According to evidence, under the optimum reaction conditions, the RhB removal rate was 99.4%. The Fe3O4/Cu2O composite exhibited good photocatalytic efficacy even after four cycles of testing. Based on the results of free radical capture experiments, hydroxyl radicals and holes cooperated as main reactive species in the photocatalytic system. The Fe3O4/Cu2O photocatalyst can be easily removed based on magnetism, and it has been proven to be very effective for the degradation of RhB under both UV and visible light irradiation.

Toward Photosynthetic Mammalian Cells through Artificial Endosymbiosis

Photosynthesis in plants occurs within specialized organelles known as chloroplasts, which are postulated to have originated through endosymbiosis with cyanobacteria. In nature, instances are also observed wherein specific invertebrates engage in symbiotic relationships with photosynthetic bacteria, allowing them to subsist as photoautotrophic organisms over extended durations. Consequently, the concept of engineering artificial endosymbiosis between mammalian cells and cyanobacteria represents a promising avenue for enabling photosynthesis in mammals. The study embarked with the identification of Synechocystis PCC 6803 as a suitable candidate for establishing a long-term endosymbiotic relationship with macrophages. The cyanobacteria internalized by macrophages exhibited the capacity to rescue ATP deficiencies within their host cells under conditions of illumination. Following this discovery, a membrane-coating strategy is developed for the intracellular delivery of cyanobacteria into non-macrophage mammalian cells. This pioneering technique led to the identification of human embryonic kidney cells HEK293 as optimal hosts for achieving sustained endosymbiosis with Synechocystis PCC 6803. The study offers valuable insights that may serve as a reference for the eventual achievement of artificial photosynthesis in mammals.

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Two-Dimensional High-Entropy Selenides for Boosting Visible-Light-Driven Photocatalytic Performance

High-entropy materials (HEMs) have garnered extensive attention owing to their diverse and captivating physicochemical properties. Yet, fine-tuning morphological properties of HEMs remains a formidable challenge, constraining their potential applications. To address this, we present a rapid, low-energy consumption diethylenetriamine (DETA)-assisted microwave hydrothermal method for synthesizing a series of two-dimensional high-entropy selenides (HESes). Subsequently, the obtained HESes are harnessed for photocatalytic water splitting. Noteworthy is the optimized HESes, Cd0.9Zn1.2Mn0.4Cu1.8Cr1.2Se4.5, showcasing an output rate of hydrogen of 16.08 mmol h-1 g-1 and a quantum efficiency of ca. 30% under 420 nm monochromatic LED irradiation. It is revealed that the photocatalytic performance of these HESes stems not only from the enlarged specific surface area and enhanced photogenerated charge carrier utilization efficiency but also from the promoted formation of the Cd-Hads bond, influenced by multiple principal elements on the Cd. These findings provide a guide for the design of HEMs tailored for various applications.

Sunlight-Driven Photothermally Boosted Photocatalytic Eradication of Superbugs Using a Plasmonic Gold Nanoparticle-Decorated WO3 Nanowire-Based Heterojunction

Superbug infections are currently one of the biggest global health problems in our society. Herein, we report the design of a plasmonic gold nanoparticle (GNP)-decorated WO3 nanowire-based heterojunction for the proficient usage of sunlight-based renewable energy to inactivate 100% superbugs via photothermally boosted photocatalytic action. Additionally, a synergistic photothermal and photocatalytic approach has been used for sunlight-driven complete eradication of carbapenem-resistant Enterobacteriaceae Escherichia coli (CRE E. coli) and methicillin-resistant Staphylococcus aureus (MRSA) superbugs. Interestingly, photocatalytic activity of methylene blue (MB) dye degradation in the presence of 670 nm near-infrared light shows that photothermally boosted photocatalytic performance is much superior to that of only a photocatalytic or photothermal process. The observed higher photocatalytic performance for the heterojunction is because the plasmonic GNP enhanced the absorption capability at 670 nm and increased the temperature of the photocatalyst surface, which reduces the activation energy of the degradation reaction. Similarly, sunlight-driven photocatalytic experiments show 100% degradation of MB after 60 min of sunlight irradiation. Moreover, sunlight-based photocatalytic inactivation of MRSA and CRE E. coli experiments show 100% inactivation after 60 min of light irradiation.

Recent progress in atomically precise metal nanoclusters for photocatalytic application

Photocatalysis is a widely recognized green and sustainable technology that can harness inexhaustible solar energy to carry out chemical reactions, offering the opportunity to mitigate environmental issues and the energy crisis. Photocatalysts with wide spectral response and rapid charge transfer capability are crucial for highly efficient photocatalytic activity. Atomically precise metal nanoclusters (NCs), an emerging atomic-level material, have attracted great interests owing to their ultrasmall size, unique atomic stacking, abundant surface active sites, and quantum confinement effect. In particular, the molecule-like discrete electronic energy level endows them with small-band-gap semiconductor behavior, which allows for photoexcitation in order to generate electrons and holes to participate in the photoredox reaction. In addition, metal NCs exhibit strong light-harvesting ability in the wide spectral UV-near IR region, and the diversity of optical absorption properties can be precisely regulated by the composition and structure. These merits make metal NCs ideal candidates for photocatalysis. In this review, the recent advances in atomically-precise metal NCs for photocatalytic application are summarized, including photocatalytic water splitting, CO2 reduction, organic transformation, photoelectrocatalytic reactions, N2 fixation and H2O2 production. In addition, the strategy for promoting photostability, charge transfer and separation efficiency of metal NCs is highlighted. Finally, a perspective on the challenges and opportunities for NCs-based photocatalysts is provided.

Efficient plasmonic water splitting by heteroepitaxial junction-induced faceting of gold nanoparticles on an anatase titanium(IV) oxide nanoplate array electrode

Plasmonic photocatalysts represented by gold nanoparticle (NP)-loaded titanium(IV) oxide (Au/TiO2) can be promising solar-to-fuel converters by virtue of their response to visible-to-near infrared light. Hitherto, Au/rutile (R)-TiO2 has been recognized as exhibiting photocatalytic activity higher than that of Au/anatase (A)-TiO2. Herein, we demonstrate that the high potential of A-TiO2 as the Au NP support can be brought out through atomic level interface control. Faceting of Au NPs is induced by a heteroepitaxial junction on an A-TiO2(001) nanoplate array (Au/A-TiO2 NPLA). Photoexcitation towards the Au/A-TiO2 NPLA electrode generates current for the water oxidation reaction at λ < 900 nm with a maximum efficiency of 0.39% at λ = 600 nm, which is much larger than the values reported so far for the usual electrodes. The striking activity of the Au/A-TiO2 NPLA electrode was rationalized using a potential-dependent Fowler model. This study presented a novel approach for developing solar-driven electrodes for green and sustainable fuel production.

Rich Sulfur Vacancies and Reduced Schottky Barrier Height Synergistically Enable Au/ZnIn2S4 with Enhanced Photocatalytic CO2 Reduction into CO

Constructing the plasmonic metal/semiconductor heterostructure with a suitable Schottky barrier height (SBH) and the sufficiently reliable active sites is of importance to achieve highly efficient and selective photocatalytic CO2 reduction into hydrocarbon fuels. Herein, we report Au/sulfur vacancy-rich ZnIn2S4 (Au/VSR-ZIS) hierarchical photocatalysts, fabricated via in situ photodepositing Au nanoparticles (NPs) onto the nanosheet self-assembled ZnIn2S4 (ZIS) micrometer flowers (MFs) with rich sulfur vacancies (VS). Density functional theory (DFT) calculations confirm that for the Au/VSR-ZIS system, the Au NPs serve as the reaction sites for H2O oxidation, and the VSR-ZIS MFs serve as those for CO2 reduction. The rich VS in the Au/VSR-ZIS hybrid can reduce its SBH so as to boost more hot electrons in the Au NPs across its Schottky barrier and then inject into the conduction band (CB) of the VSR-ZIS MFs. In addition, VS can also act as the electron sink to trap the photogenerated electrons, retarding the recombination of photogenerated carriers. The two merits effectively enhance the photogenerated electron density in the surface of VSR-ZIS MFs, availing CO2 photoreduction. In addition, the introduction of rich VS in the Au/VSR-ZIS hybrid can offer more active sites, benefiting the CO2 adsorption and accelerating the desorption of CO* from the surface of the photocatalyst. Therefore, under visible light illumination with no sacrificial reagent, the optimum photocatalyst (Au/VSR-ZIS-0.4) presents the enhanced and selective CO2 photoreduction into CO (8.15 μmol g-1h-1 and near 100%), which are superior to those of most of ZIS-based and plasmon-based photocatalysts. The photocatalytic activity is about 40.0-fold as high as that of the Vs-poor-ZIS (VSP-ZIS) MFs. This work contributes a viable strategy for designing highly efficient plasmonic photocatalysts by using the synergism of the anion vacancies and the optimized SBH induced by them.

Hollow g-C3N4@Ag3PO4 Core-Shell Nanoreactor Loaded with Au Nanoparticles: Boosting Photothermal Catalysis in Confined Space

Low solar energy utilization efficiency and serious charge recombination remain major challenges for photocatalytic systems. Herein, a hollow core-shell Au/g-C3N4@Ag3PO4 photothermal nanoreactor is successfully prepared by a two-step deposition method. Benefit from efficient spectral utilization and fast charge separation induced by the unique hollow core-shell heterostructure, the H2 evolution rate of Au/g-C3N4@Ag3PO4 is 16.9 times that of the pristine g-C3N4, and the degradation efficiency of tetracycline is increased by 88.1%. The enhanced catalytic performance can be attributed to the ordered charge movement on the hollow core-shell structure and a local high-temperature environment, which effectively accelerates the carrier separation and chemical reaction kinetics. This work highlights the important role of the space confinement effect in photothermal catalysis and provides a promising strategy for the development of the next generation of highly efficient photothermal catalysts.

Modification Strategies of Hexagonal Boron Nitride Nanomaterials for Photocatalysis

Although hexagonal boron nitride (h-BN) was initially considered a less promising photocatalyst due to its large band gap and apparent chemical inertness, its unique two-dimensional lamellar structure coupled with high stability and environmental friendliness, as the second largest van der Waals material after graphene, provides a unique platform for photocatalytic innovation. This review not only highlights the intrinsic qualities of h-BN with photocatalytic potentials, such as high stability, environmental compatibility, and tunable bandgap through various modification strategies but also provides a comprehensive overview of the recent advances in h-BN-based nanomaterials for environmental and energy applications, as well as an in-depth description of the modification methods and fundamental properties for these applications. In addition, we discuss the challenges and prospects of h-BN-based nanomaterials for future photocatalysis.

Accelerating Charge Kinetics in Photocatalytic CO2 Reduction by Modulating the Cobalt Coordination in Heterostructures of Cadmium Sulfide/Metal-Organic Layer

Artificial photocatalytic CO2 reduction (CO2R) holds great promise to directly store solar energy into chemical bonds. The slow charge and mass transfer kinetics at the triphasic solid-liquid-gas interface calls for the rational design of heterogeneous photocatalysts concertedly boosting interfacial charge transfer, local CO2 concentration, and exposure of active sites. To meet these requirements, in this study heterostructures of CdS/MOL (MOL = metal-organic layer) furnishing different redox Co sites are fabricated for CO2R photocatalysts. It is found that the coordination environment of Co is key to photocatalytic activity. The best catalyst ensemble comprising ligand-chelated Co2+ with the bipyridine electron mediator demonstrates a high CO yield rate of 1523 µmol h-1 gcat -1, selectivity of 95.8% and TON of 1462.4, which are ranked among the best seen in literature. Comprehensive photochemical and electroanalytical characterizations attribute the high CO2R performance to the improved photocarrier separation and charge kinetics originated from the proper energy band alignment and coordination chemistry. This work highlights the construction of 2D heterostructures and modulation of transition metal coordination to expedite the charge kinetics in photocatalytic CO2 reduction.

In-situ and wavelength-dependent photocatalytic strain evolution of a single Au nanoparticle on a TiO2 film

Photocatalysis is a promising technique due to its capacity to efficiently harvest solar energy and its potential to address the global energy crisis. However, the structure-activity relationships of photocatalyst during wavelength-dependent photocatalytic reactions remains largely unexplored because it is difficult to measure under operating conditions. Here we show the photocatalytic strain evolution of a single Au nanoparticle (AuNP) supported on a TiO2 film by combining three-dimensional (3D) Bragg coherent X-ray diffraction imaging with an external light source. The wavelength-dependent generation of reactive oxygen species (ROS) has significant effects on the structural deformation of the AuNP, leading to its strain evolution. Density functional theory (DFT) calculations are employed to rationalize the induced strain caused by the adsorption of ROS on the AuNP surface. These observations provide insights of how the photocatalytic activity impacts on the structural deformation of AuNP, contributing to the general understanding of the atomic-level catalytic adsorption process.

Efficient photocatalytic degradation of perfluorooctanoic acid by bismuth nanoparticle modified titanium dioxide

Perfluorooctanoic acid (PFOA) is potentially toxic and exceptionally stable attributed to its robust CF bond, which is hard to be removed by UV/TiO2 systems. In this research, bismuth nanoparticle (Bi NP) modified titanium oxides (Bi/TiO2) were synthesized by a simple photochemical deposition-calcination method and were applied as photocatalysts for the first time to degrade PFOA. The removal rate of 50 mg/L PFOA reached 99.3 % with 58.6 % defluorination rate after 30 min of irradiation via a mercury lamp. Bi/TiO2 exhibited superior performance in PFOA degradation compared to commercial photocatalysts (TiO2, Ga2O3, Bi2O3 and In2O3). In addition, Bi/TiO2 showed high degradation activity under actual sunlight, achieved 100 % removal rate and 59.3 % defluorination rate within 2 h. Bi NPs increase the light trapping ability of Bi/TiO2 and promote the separation of photogenerated electron-hole pairs via local surface plasmon resonance (LSPR) effect, which results in more photogenerated holes (h+) and hydroxyl radicals (OH). Combined with DFT calculations and intermediate detections, the degradation reaction is initiated from the oxidation of the PFOA carboxyl group via h+, followed by the loss of the CF2 unit step by step with the participation of OH. This work presents a novel approach for the practical implementation of TiO2-based photocatalysts to achieve highly efficient photocatalytic degradation of perfluorocarboxylic acids (PFCAs).

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5 nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9 µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

Oxygen vacancy engineering of ultra-small CuWO4 nanoparticles for boosting photocatalytic organic pollutant degradation

Nanomaterials have attracted great interest in the field of photocatalytic degradation due to their larger specific surface area and efficient charge/mass transfer ability, which are beneficial for enhancing photocatalytic activity. However, the bandgap of photocatalysts would increase with the size reduction, weakening the photoabsorption ability. Thus the relationship between the size of catalysts and photoactivity should be balanced to achieve optimal photocatalytic performance. Herein, ultra-small CuWO4 nanoparticles (ca. 39 nm) with moderate oxygen vacancies (CuWO4-OVs) were synthesized by the cascade strategy (ligand confinement@fast calcination). The introduction of oxygen vacancies offset the deficiency of light absorption ability caused by the small size effect. Besides, oxygen vacancies could provide more reaction active sites, conducive to the adsorption and activation of dye molecules and H2O. Degradation experiments reveal that the optimized photocatalyst CuWO4-OVs 350 shows outstanding photocatalytic activity, and the removal ratio of methylene blue (MB) reaches over 90.26% in 70 min, exceeding that of pure CuWO4-air (37.66%). Additionally, the degradation performance of CuWO4-OVs 350 surpasses most of the other CuWO4-based photocatalytic systems. More importantly, the photocatalytic degradation activity of CuWO4-OVs 350 could remain at 88.26% even after five cycles, and high photostability was achieved. This work affords constructive inspiration for synergistic photoactivity enhancement and increase of catalyst reaction active sites to achieve eminent photocatalytic degradation performance.

Noble-Metal-Free Single- and Dual-Atom Catalysts for Artificial Photosynthesis

Artificial photosynthesis enables direct solar-to-chemical energy conversion aimed at mitigating environmental pollution and producing solar fuels and chemicals in a green and sustainable approach, and efficient, robust, and low-cost photocatalysts are the heart of artificial photosynthesis systems. As an emerging new class of cocatalytic materials, single-atom catalysts (SACs) and dual-atom catalysts (DACs) have received a great deal of current attention due to their maximal atom utilization and unique photocatalytic properties, whereas noble-metal-free ones impart abundance, availability, and cost-effectiveness allowing for scalable implementation. This review outlines the fundamental principles and synthetic methods of SACs and DACs and summarizes the most recent advances in SACs (Co, Fe, Cu, Ni, Bi, Al, Sn, Er, La, Ba, etc.) and DACs (CuNi, FeCo, InCu, KNa, CoCo, CuCu, etc.) based on non-noble metals, confined on an arsenal of organic or inorganic substrates (polymeric carbon nitride, metal oxides, metal sulfides, metal-organic frameworks, carbon, etc.) acting as versatile scaffolds in solar-light-driven photocatalytic reactions, including hydrogen evolution, carbon dioxide reduction, methane conversion, organic synthesis, nitrogen fixation, hydrogen peroxide production, and environmental remediation. The review concludes with the challenges, opportunities, and future prospects of noble-metal-free SACs and DACs for artificial photosynthesis.

A review on transition metal oxides based photocatalysts for degradation of synthetic organic pollutants

This review provides insight into the current research trend in transition metal oxides (TMOs)-based photocatalysis in removing the organic colouring matters from water. For easy understanding, the research progress has been presented in four generations according to the catalyst composition and mode of application, viz: single component TMOs (the first-generation), doped TMOs/binary TMOs/doped binary TMOs (the second-generation), inactive/active support-immobilized TMOs (the third-generation), and ternary/quaternary compositions (the fourth-generation). The first two generations represent suspended catalysts, the third generation is supported catalysts, and the fourth generation can be suspended or supported. The review provides an elaborated comparison between suspended and supported catalysts, their general/specific requirements, key factors controlling degradation, and the methodologies for performance evaluation. All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated. The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed. Future research trends are also presented.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

Harnessing Renewable Lignocellulosic Potential for Sustainable Wastewater Purification

Utilizing renewable lignocellulosic resources for wastewater remediation is crucial to achieving sustainable social development. However, the resulting by-products and the synthetic process characterized by complexity, high cost, and environmental pollution limit the further development of lignocellulose-based materials. Here, we developed a sustainable strategy that involved a new functional deep eutectic solvent (DES) to deconstruct industrial xylose residue into cellulose-rich residue with carboxyl groups, lignin with carboxyl and quaternary ammonium salt groups, and DES effluent rich in lignin fragments. Subsequently, these fractions equipped with customized functionality were used to produce efficient wastewater remediation materials in cost-effective and environmentally sound manners, namely, photocatalyst prepared by carboxyl-modified cellulose residue, biochar-based adsorbent originated from modified lignin, and flocculant synthesized by self-catalytic in situ copolymerization of residual DES effluent at room temperature. Under the no-waste principle, this strategy upgraded the whole components of waste lignocellulose into high-value-added wastewater remediation materials with excellent universality. These materials in coordination with each other can stepwise purify high-hazardous mineral processing wastewater into drinkable water, including the removal of 99.81% of suspended solids, almost all various heavy metal ions, and 97.09% chemical oxygen demand, respectively. This work provided promising solutions and blueprints for lignocellulosic resources to alleviate water shortages while also advancing the global goal of carbon neutrality.

Polyarene Oxides with Tunable Quinone Units for Photocatalytic CO2 Reduction: A Simple Strategy toward Effective and Selective Catalysts

The photocatalytic transformation of carbon dioxide (CO2) into valuable chemicals is a challenging process that requires effective and selective catalysts. However, most polymer-based photocatalysts with electron donor-acceptor (D-A) structures are synthesized with a fixed D-A ratio by using expensive monomers. Herein, we report a simple strategy to prepare polyarene oxides (PAOs) with quinone structural units via oxidation treatment of polyarene (PA). The resultant PAOs show tunable D-A structures and electronic band positions depending on the degree of oxidation, which can catalyze the photoreduction of CO2 with water under visible light irradiation, generating CO as the sole carbonaceous product without H2 generation. Especially, the PAO with an oxygen content of 17.6% afforded the highest CO production rate of 161.9 μmol g-1 h-1. It is verified that the redox transformation between quinone and phenolic hydroxyl in PAOs achieves CO2 photoreduction coupled with water oxidation. This study provides a facile way to access conjugated polymers with a tunable D-A structure and demonstrates that the resultant PAOs are promising photocatalysts for CO2 reduction.

Enhanced Photocatalytic Nitrogen Reduction via Bismuth Nanoparticle-Decorating ZnCdS Solid Solution

The construction of photocatalysts with a surface plasmon resonance effect (SPR) has been demonstrated as a highly effective strategy for enhancing photocatalytic efficiency. In this paper, we synthesized a catalyst with bismuth metal loaded on ZnCdS nanospheres for an efficient photocatalytic nitrogen reduction reaction (PNRR). The SPR effect induced by Bi nanoparticles under light excitation significantly promoted the ammonia production efficiency of the photocatalyst. Under air ambient conditions with lactic acid as the sacrificial agent, the photocatalytic NH4+ yield of 3% Bi@ZnCdS was 58.93 μmol·g-1·h-1, which exhibited an approximately 7.7 times that of the pure phase ZnCdS. The experimental characterization results demonstrate that the incorporation of metallic bismuth enhances the light absorption capacity of the catalyst and improves the separation efficiency of the photogenerated carriers. Theoretical calculations proved that Bi NPs provide more photogenerated electrons to convert N2 to NH3 for solid-solution ZnCdS. This work presents a novel concept for the development of advanced plasma nanomaterials to enhance the photocatalytic nitrogen fixation reaction.

Multifunctional sulfur doping in cobalt-based materials for high-energy density supercapacitors

In this study, S-CCO@Co(OH)2('CCO' representing CuCo2O4/Cu2O; 'S-'representing sulfur doping) was synthesized by hydrothermal method followed by electrodeposition. The multiple effects of S doping were studied by S doping and constructing 3D core-shell structure. S doping induced the reduction of Cu2+and Co3+to Cu+and Co2+, respectively. Also, S partially replaces O and creates oxygen vacancies, which increases a number of active sites for the redox reaction enhancing the redox reaction activity. After the electrodeposition, S-Co bond is formed between the Co(OH)2shell and the S-CCO core, which suggests a synergistic effect between S doping and core-shell structure. The formation of S-Co bond is conducive to electron and ion transport, thus improving electrochemical performance. After modification, the specific capacitance of S-CCO@Co(OH)2is 4.28 times higher than CCO, up to 1730 Fg-1. Furthermore, the assembled S-CCO@Co(OH)2//activated carbon supercapacitor exhibits an energy density of 83.89 Whkg-1at 848.81 Wkg-1and a retention rate of 98.48% after 5000 charge and discharge cycles. Therefore, S doping and its mutual effect with the utilization of the core-shell structure considerably enhanced the electrochemical performance of the CCO-based electrodes, endowing its potential in further application.

Triple Play of Band Gap, Interband, and Plasmonic Excitations for Enhanced Catalytic Activity in Pd/HxMoO3 Nanoparticles in the Visible Region

Plasmonic photocatalysis has been limited by the high cost and scalability of plasmonic materials, such as Ag and Au. By focusing on earth-abundant photocatalyst/plasmonic materials (HxMoO3) and Pd as a catalyst, we addressed these challenges by developing a solventless mechanochemical synthesis of Pd/HxMoO3 and optimizing photocatalytic activities in the visible range. We investigated the effect of HxMoO3 band gap excitation (at 427 nm), Pd interband transitions (at 427 nm), and HxMoO3 localized surface plasmon resonance (LSPR) excitation (at 640 nm) over photocatalytic activities toward the hydrogen evolution and phenylacetylene hydrogenation as model reactions. Although both excitation wavelengths led to comparable photoenhancements, a 110% increase was achieved under dual excitation conditions (427 + 640 nm). This was assigned to a synergistic effect of optical excitations that optimized the generation of energetic electrons at the catalytic sites. These results are important for the development of visible-light photocatalysts based on earth-abundant components.

UV-light-responsive Ag/TiO2/PVA nanocomposite for photocatalytic degradation of Cr, Ni, Zn, and Cu heavy metal ions

The rapid growth of industrialization has led to the uncontrolled pollution of the environment, and rapid action is needed. This study synthesized Ag/TiO2/polyvinyl alcohol (PVA) nano photocatalyst for promising light-derived photocatalytic removal of heavy metal ions. The design of experiment (DOE) was used to study the effect of important factors (pH, reaction time, and photocatalyst dosage) to maximize the final performance of the photocatalyst. In the optimized condition, the Ag/TiO2/PVA nano-photocatalyst removed more than 94% of Cr6+ in 180 min, and the efficiency was more than 70% for Cu2+, Zn2+, and Ni2+ metal ions. The adsorption of the heavy metal ions on the photocatalyst was described well with the Langmuir isotherm, while the pseudo-second-order linear kinetic model fitted with the experimental data. The nano-photocatalyst's stability was confirmed after maintaining its performance for five successive runs. The enhanced photocatalytic activity for the heavy metal ions removal can be attributed to the presence of metallic silver nanoparticles (electron transfer and plasmonic fields mechanisms) and PVA, which delayed the recombination of electron-hole. The synthesized ternary Ag/TiO2/PVA nano-photocatalyst showed promising performance for the elimination of heavy metal ions and can be used for environmental remediation purposes.

Bismuth-Based Z-Scheme Heterojunction Photocatalysts for Remediation of Contaminated Water

Agricultural runoff, fuel spillages, urbanization, hospitalization, and industrialization are some of the serious problems currently facing the world. In particular, byproducts that are hazardous to the ecosystem have the potential to mix with water used for drinking. Over the last three decades, various techniques, including biodegradation, advanced oxidation processes (AOPs), (e.g., photocatalysis, photo-Fenton oxidation, Fenton-like oxidation, and electrochemical oxidation process adsorption), filtration, and adsorption techniques, have been developed to remove hazardous byproducts. Among those, AOPs, photocatalysis has received special attention from the scientific community because of its unusual properties at the nanoscale and its layered structure. Recently, bismuth based semiconductor (BBSc) photocatalysts have played an important role in solving global energy demand and environmental pollution problems. In particular, bismuth-based Z-scheme heterojunction (BBZSH) is considered the best alternative route to overhaul the limitations of single-component BBSc photocatalysts. This work aims to review recent studies on a new type of BBZSH photocatalysts for the treatment of contaminated water. The general overview of the synthesis methods, efficiency-enhancing strategies, classifications of BBSc and Z-scheme heterojunctions, the degradation mechanisms of Z- and S-schemes, and the application of BBZSH photocatalysts for the degradation of organic dyes, antibiotics, aromatics compounds, endocrine-disrupting compounds, and volatile organic compounds are reviewed. Finally, challenges and the future perspective of BBZSH photocatalysts are discussed.

Tuning d-Orbital Electronic Structure via Au-Intercalated Two-Dimensional Fe3GeTe2 to Increase Surface Plasmon Activity

While extensive research has been dedicated to plasmon tuning within non-noble metals, prior investigations primarily concentrated on markedly augmenting the inherently low concentration of free carriers in materials with minimal consideration given to the influence of electron orbitals on surface plasmons. Here, we achieve successful intercalation of Au atoms into the layered structure of Fe3GeTe2 (FGT), thereby exerting control over the orbital electronic states or structure of FGT. This intervention not only amplifies the charge density and electron mobility but also mitigates the loss associated with interband transitions, resulting in increased two-dimensional FGT surface plasmon activity. As a consequence, Au-intercalated FGT detects crystal violet molecules as a surface-enhanced Raman scattering substrate, and the detection lines are 3 orders of magnitude higher than before Au intercalation. Our work provides insight for further studies on plasmon effects and the relation between surface plasmon resonance behavior and electronic structures.

Visible-Light-Responsive Polyoxometalate@Metal-Organic Frameworks Involving Ir Metalloligands for Highly Selective Photocatalytic Oxidation of Sulfides to Sulfoxide

The synthesis of highly efficient visible-light-responsive photocatalysts is fundamental to solving the problems of low efficiency and poor selectivity in photocatalytic organic synthesis reactions. We synthesized a crystalline polyoxometalate @metal-organic framework material {Zn4 (H2 O)8 [Ir(ppy)2 (dcbpy)]4 [SiW12 O40 ]} ⋅ 4H2 O (Ir-SiW) by self-assembly of Ir metalloligands with POMs. The introduction of Ir metalloligands extends the light absorbing range to visible light, improving the efficient utilization of solar energy. The transfer of photogenerated electrons from Ir metalloligands to SiW12 was observed under visible light irradiation, which boosted the carrier separation efficiency. The synergistic effect of the two components increased the photocatalytic thioether oxidation activity, and the product methyl phenyl sulfoxide for 2.5 h under visible light irradiation (λ >400 nm) reached 99.5 %, which was higher than those of other POM-based photocatalysts. Meanwhile, the yield of methyl phenyl sulfoxide was still higher than 97 % after three cycles, demonstrating the high stability and reusability of Ir-SiW.

A nonmetallic plasmonic catalyst for photothermal CO2 flow conversion with high activity, selectivity and durability

The meticulous design of active sites and light absorbers holds the key to the development of high-performance photothermal catalysts for CO2 hydrogenation. Here, we report a nonmetallic plasmonic catalyst of Mo2N/MoO2-x nanosheets by integrating a localized surface plasmon resonance effect with two distinct types of active sites for CO2 hydrogenation. Leveraging the synergism of dual active sites, H2 and CO2 molecules can be simultaneously adsorbed and activated on N atom and O vacancy, respectively. Meanwhile, the plasmonic effect of this noble-metal-free catalyst signifies its promising ability to convert photon energy into localized heat. Consequently, Mo2N/MoO2-x nanosheets exhibit remarkable photothermal catalytic performance in reverse water-gas shift reaction. Under continuous full-spectrum light irradiation (3 W·cm-2) for a duration of 168 h, the nanosheets achieve a CO yield rate of 355 mmol·gcat-1·h-1 in a flow reactor with a selectivity exceeding 99%. This work offers valuable insights into the precise design of noble-metal-free active sites and the development of plasmonic catalysts for reducing carbon footprints.

Self-induced electron attraction center formation with pyrophosphorylation strategy for photocatalytic hydrogen evolution

An integral approach towards augmenting the performance of photocatalytic hydrogen production lies in the induction of charge transfer mediators within the material matrix itself, thereby facilitating swift and efficient charge transfer processes. Here, CoTiO3 is induced to grow its electronic attraction center, CoP3, through a high-temperature phosphatization strategy. CoP3 acts as the active reduction site for the hydrogen evolution reaction and enhances the photocatalytic performance of the pristine catalyst. Compared with pure CoTiO3, the PCTO7 hybrid catalyst with the electronic attraction center CoP3 exhibits a superior photocatalytic performance and good stability. Experimental results show that the hydrogen evolution performance of the PCTO7 hybrid catalyst reaches 56.52 μmol, which is 78 times higher than that of the single catalyst CoTiO3 (0.72 μmol). These results demonstrate that the hybrid catalyst with the self-induced electronic attraction center has a higher light absorption capacity, faster charge carrier dynamics and improved photogenerated charge carrier separation and transfer than pure CoTiO3, resulting in excellent redox capability. DFT calculations provide evidence supporting the topological metal properties of CoP3 as the electron sink center. This study provides a feasible approach for enhancing the photocatalytic performance of a pristine catalyst employing a high-temperature phosphatization-induced electron sink center.