Carriers, Quasi-particles, and Collective Excitations in Halide Perovskites

Organic Ligand Engineering for Tailoring Electron-Phonon Coupling in 2D Hybrid Perovskites

In the emerging two-dimensional organic-inorganic hybrid perovskites, the electronic structures and carrier behaviors are strongly impacted by intrinsic electron-phonon interactions, which have received inadequate attention. In this study, we report an intriguing phenomenon of negative carrier diffusion induced by electron-phonon coupling in (2T)2PbI4. Theoretical calculations reveal that the electron-phonon coupling drives the band alignment in (2T)2PbI4 to alternate between type I and type II heterostructures. As a consequence, photoexcited holes undergo transitions between the organic ligands and inorganic layers, resulting in abnormal carrier transport behavior compared to other two-dimensional hybrid perovskites. These findings provide valuable insights into the role of electron-phonon coupling in shaping the band alignments and carrier behaviors in two-dimensional hybrid perovskites. They also open up exciting avenues for designing and fabricating functional semiconductor heterostructures with tailored properties.

Weakly Confined Organic-Inorganic Halide Perovskite Quantum Dots as High-Purity Room-Temperature Single Photon Sources

Colloidal perovskite quantum dots (PQDs) have emerged as highly promising single photon emitters for quantum information applications. Presently, most strategies have focused on leveraging quantum confinement to increase the nonradiative Auger recombination (AR) rate to enhance single-photon (SP) purity in all-inorganic CsPbBr3 QDs. However, this also increases the fluorescence intermittency. Achieving high SP purity and blinking mitigation simultaneously remains a significant challenge. Here, we transcend this limitation with room-temperature synthesized weakly confined hybrid organic-inorganic perovskite (HOIP) QDs. Superior single photon purity with a low g(2)(0) < 0.07 ± 0.03 and a nearly blinking-free behavior (ON-state fraction >95%) in 11 nm FAPbBr3 QDs are achieved at room temperature, attributed to their long exciton lifetimes (τX) and short biexciton lifetimes (τXX). The significance of the organic A-cation is further validated using the mixed-cation FAxCs1-xPbBr3. Theoretical calculations utilizing a combination of the Bethe-Salpeter (BSE) and k·p approaches point toward the modulation of the dielectric constants by the organic cations. Importantly, our findings provide valuable insights into an additional lever for engineering facile-synthesized room-temperature PQD single photon sources.

Stable and Efficient Mixed-halide Perovskite LEDs

Tailoring bandgap by mixed-halide strategy in perovskites has attracted extraordinary attention due to the flexibility of halide ion combinations and has emerged as the most direct and effective approach to precisely tune the emission wavelength throughout the entire visible light spectrum. Mixed-halide perovskites, yet, still suffered from several problems, particularly phase segregation under external stimuli because of ions migration. Understanding the essential cause and finding sound strategies, thus, remains a challenge for stable and efficient mixed-halide perovskite light-emitting diodes (PeLEDs). The review herein presents an overview of the diverse application scenarios and the profound significance associated with mixed-halide perovskites. We then summarize the challenges and potential research directions toward developing high stable and efficient mixed-halide PeLEDs. The review thus provides a systematic and timely summary for the community to deepen the understanding of mixed-halide perovskite materials and resulting PeLEDs.

Surface Passivation to Enhance the Interfacial Pyro-Phototronic Effect for Self-Powered Photodetection Based on Perovskite Single Crystals

The interfacial pyro-phototronic effect (IPPE) presents a novel approach for improving the performance of self-powered photodetectors (PDs) based on metal halide perovskites (MHPs). The interfacial contact conditions within the Schottky junctions are crucial in facilitating the IPPE phenomenon. However, the fabrication of an ideal Schottky junction utilizing MHPs is a challenging endeavor. In this study, we present a surface passivation method aimed at enhancing the performance of self-powered photodetectors based on inverted planar perovskite structures in micro- and nanoscale metal-halide perovskite SCs. Our findings demonstrate that the incorporation of a lead halide salt with a benzene ring moiety for surface passivation leads to a substantial improvement in photoresponses by means of the IPPE. Conversely, the inclusion of an alkane chain in the salt impedes the IPPE. The underlying mechanism can be elucidated through an examination of the band structure, particularly the work function (WF) modulated by surface passivation. Consequently, this alteration affects the band bending and the built-in field (VBi) at the interface. This strategy presents a feasible and effective method for producing interfacial pyroelectricity in MHPs, thus facilitating its potential application in practical contexts such as energy conversion and infrared sensors.

Superalkali halide perovskites with suitable direct band gaps for photovoltaic applications

The construction of superalkali halide perovskites has attracted attention for the development of new photovoltaic materials, but stable superalkalis have not been found until now. Herein, to construct new three-dimensional superalkali halide perovskites with a MI3 frame (M = Sn and Pb), a new Li(H2O)3+ superalkali cation is designed and selected based on low vertical ionization potential, suitable tolerance factor, small ionic radius and large dissociation energy. High-throughput first-principles calculations show that superalkalis with lower vertical ionization potentials exhibit stronger interactions with the MI3 frame. The normal and cubic Li(H2O)3MI3 perovskites and cubic Li(H2O)4PbI3 perovskites have direct band gaps, s-p and p-p electron transitions, effective carrier masses of less than 0.45me and exciton binding energies of less than 291 meV. Moreover, the cubic Li(H2O)3PbI3 perovskite with a direct band gap of 1.40 eV can in theory show a power conversion efficiency of 33.49%. These results strongly suggest that superalkali cations with large dissociation energy can be used to develop stable superalkali perovskites for photovoltaic applications.

Making and Breaking of Exciton Cooling Bottlenecks in Halide Perovskite Nanocrystals

Harnessing quantum confinement (QC) effects in semiconductors to retard hot carrier cooling (HCC) is an attractive approach for enabling efficient hot carrier extraction to overcome the Shockley-Queisser limit. However, there is a debate about whether halide perovskite nanocrystals (PNCs) can effectively exploit these effects. To address this, we utilized pump-probe and multipulse pump-push-probe spectroscopy to investigate HCC behavior in PNCs of varying sizes and cation compositions. Our results validate the presence of an intrinsic phonon bottleneck with clear manifestations of QC effects in small CsPbBr3 PNCs exhibiting slower HCC rates compared to those of larger PNCs. However, the replacement of inorganic Cs+ with organic cations suppresses this intrinsic bottleneck. Furthermore, PNCs exhibit distinct size-dependent HCC behavior in response to changes in the cold carrier densities. We attribute this to the enhanced exciton-exciton interactions in strongly confined PNCs that facilitate Auger heating. Importantly, our findings dispel the existing controversy and provide valuable insights into design principles for engineering QC effects in PNC hot carrier applications.

Additive effect on hot carrier cooling in a hybrid perovskite

Slowing hot carrier (HC) cooling in lead halide perovskites is important to further improve the efficiency of perovskite solar cells (PSCs). Herein, we found that HC cooling can be efficiently prolonged by incorporating an organic small molecule (TDGA) into the perovskite film as an additive through transient absorption spectroscopy measurements, which is conducive to the extraction of the HC energies by the carrier transport layers and reduces charge carrier recombination, consequently improving the efficiency of the TDGA-doped device.

Small to Large Polaron Behavior Induced by Controlled Interactions in Perovskite Quantum Dot Solids

The polaron is an essential photoexcitation that governs the unique optoelectronic properties of organic-inorganic hybrid halide perovskites, and it has been subject to extensive spectroscopic and theoretical investigation over the past decade. A crucial but underexplored question is how the nature of the photogenerated polarons is impacted by the microscopic perovskite structure and what functional properties this affects. To tackle this question, we chemically tuned the interactions between perovskite quantum dots (QDs) to rationally manipulate the polaron properties. Through a suite of time-resolved spectroscopies, we find that inter-QD interactions open an excited-state channel to form large polaron species, which exhibit enhanced spatial diffusion, slower hot polaron cooling, and a longer intrinsic lifetime. At the same time, polaronic excitons are formed in competition via localized band-edge states, exhibiting strong photoluminescence but are limited by shorter intrinsic lifetimes. This control of polaron type and function through tunable inter-QD interactions not only provides design principles for QD-based materials but also experimentally disentangles polaronic species in hybrid perovskite materials.

A Self-Powered UV Photodetector With Ultrahigh Responsivity Based on 2D Perovskite Ferroelectric Films With Mixed Spacer Cations

Self-powered photodetectors (PDs) have the advantages of no external power requirement, wireless operation, and long life. Spontaneous ferroelectric polarizations can significantly increase built-in electric field intensity, showing great potential in self-powered photodetection. Moreover, ferroelectrics possess pyroelectric and piezoelectric properties, beneficial for enhancing self-powered PDs. 2D metal halide perovskites (MHPs), which have ferroelectric properties, are suitable for fabricating high-performance self-powered PDs. However, the research on 2D metal halide perovskites ferroelectrics focuses on growing bulk crystals. Herein, 2D ferroelectric perovskite films with mixed spacer cations for self-powered PDs are demonstrated by mixing Ruddlesden-Popper (RP)-type and Dion-Jacobson (DJ)-type perovskite. The (BDA0.7 (BA2 )0.3 )(EA)2 Pb3 Br10 film possesses, overall, the best film qualities with the best crystalline quality, lowest trap density, good phase purity, and obvious ferroelectricity. Based on the ferro-pyro-phototronic effect, the PD at 360 nm exhibits excellent photoelectric properties, with an ultrahigh peak responsivity greater than 93 A W-1 and a detectivity of 2.5 × 1015 Jones, together with excellent reproducibility and stability. The maximum responsivities can be modulated by piezo-phototronic effect with an effective enhancement ratio of 480%. This work will open up a new route of designing MHP ferroelectric films for high-performance PDs and offers the opportunity to utilize it for various optoelectronics applications.