Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Optical Modification of a Nanoporous Alumina Structure Associated with Surface Coverage by the Ionic Liquid AliquatCl

This manuscript analyses changes in the optical parameters of a commercial alumina nanoporous structure (AnodiscTM or AND support) due to surface coverage by the ionic liquid (IL) AliquatCl (AlqCl). XPS measurements were performed for chemical characterization of the composite AND/AlqCl and the AND support, but XPS resolved angle analysis (from 15° to 75°) was carried out for the homogeneity estimation of the top surface of the ANDAlqCl sample. Optical characterization of both the composite AND/AlqCl and the AND support was performed by three non-destructive and non-invasive techniques: ellipsometry spectroscopy (SE), light transmittance/reflection, and photoluminescence. SE measurements (wavelength ranging from 250 nm to 1250 nm) allow for the determination of the refraction index of the AND/AlqCl sample, which hardly differs from that corresponding to the IL, confirming the XPS results. The presence of the IL significantly increases the light transmission of the alumina support in the visible region and reduces reflection, affecting also the maximum position of this latter curve, as well as the photoluminescence spectra. Due to these results, illuminated I-V curves for both the composite AND/AlqCl film and the AND support were also measured to estimate its possible application as a solar cell. The optical behaviour exhibited by the AND/AlqCl thin film in the visible region could be of interest for different applications.

The Mass-Balancing between Positive and Negative Electrodes for Optimizing Energy Density of Supercapacitors

Supercapacitors (SCs) are some of the most promising energy storage devices, but their low energy density is one main weakness. Over the decades, superior electrode materials and suitable electrolytes have been widely developed to enhance the energy storage ability of SCs. Particularly, constructing asymmetric supercapacitors (ASCs) can extend their electrochemical stable voltage windows (ESVWs) and thus achieve high energy density. However, only full utilization of the electrochemical stable potential windows (ESPWs) of both positive and negative electrodes can endow the ASC devices with a maximum ESVW by using a suitable mass-ratio between two electrodes (the mass-balancing). Nevertheless, insufficient attention is directed to mass-balancing, and even numerous misunderstandings and misuses have appeared. Therefore, in this Perspective, we focus on the mass-balancing: summarize theoretic basis of the mass-balancing, derive relevant relation equations, analyze and discuss the change trends of the specific capacitance and energy density of ASCs with mass-ratios, and finally recommend some guidelines for the normative implementation of the mass-balancing. Especially, the issues related to pseudocapacitive materials, hybrid devices, and different open circuit potentials (OCPs) of the positive and negative electrodes in the mass-balancing are included and emphasized. These analyses and guidelines can be conducive to understanding and performing mass-balancing for developing high-performance SCs.

Redox potentials in ionic liquids: Anomalous behavior?

Redox potentials depend on the nature of the solvent/electrolyte through the solvation energies of the ionic solute species. For concentrated electrolytes, ion solvation may deviate significantly from the Born model predictions due to ion pairing and correlation effects. Recently, Ghorai and Matyushov [J. Phys. Chem. B 124, 3754-3769 (2020)] predicted, on the basis of linear response theory, an anomalous trend in the solvation energies of room temperature ionic liquids, with deviations of hundreds of kJ/mol from the Born model for certain size solutes/ions. In this work, we computationally evaluate ionic solvation energies in the prototypical ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM/BF4), to further explore this behavior and benchmark several of the approximations utilized in the solvation energy predictions. For comparison, we additionally compute solvation energies within acetonitrile and molten NaCl salt to illustrate the limiting behavior of purely dipolar and ionic solvents. We find that the overscreening effect, which results from the inherent charge oscillations of the ionic liquid, is substantially reduced in magnitude due to screening from the dipoles of the molecular ions. Therefore, for the molten NaCl salt, for which the ions do not have permanent dipoles, modulation of ionic solvation energies from the overscreening effect is most significant. The conclusion is that ionic liquids do indeed exhibit unique solvation behavior due to peak(s) in the electrical susceptibility caused by the ion shell structure; redox potential shifts for BMIM/BF4 are of more modest order ∼0.1 V, but may be larger for other ionic liquids that approach molten salt behavior.

Electrochemically Exfoliated Graphene Additive-Free Inks for 3D Printing Customizable Monolithic Integrated Micro-Supercapacitors on a Large Scale

Three-dimensional (3D) printing technology with enhanced fidelity can achieve multiple functionalities and boost electrochemical performance of customizable planar micro-supercapacitors (MSCs), however, precise structural control of additive-free graphene-based macro-assembly electrode for monolithic integrated MSCs (MIMSCs) remains challenging. Here, the large-scale 3D printing fabrication of customizable planar MIMSCs is reported utilizing additive-free, high-quality electrochemically exfoliated graphene inks, which is not required the conventional cryogenic assistance during the printing process and any post-processing reduction. The resulting MSCs reveal an extremely small engineering footprint of 0.025 cm2, exceptionally high areal capacitance of 4900 mF cm-2, volumetric capacitance of 195.6 F cm-3, areal energy density of 2.1 mWh cm-2, and unprecedented volumetric energy density of 23 mWh cm-3 for a single cell, surpassing most previously reported 3D printed MSCs. The 3D printed MIMSC pack is further demonstrated, with the maximum areal cell count density of 16 cell cm-2, the highest output voltage of 192.5 V and the largest output voltage per unit area of 56 V cm-2 up to date are achieved. This work presents an innovative solution for processing high-performance additive-free graphene ink and realizing the large-scale production of 3D printed MIMSCs for planar energy storage.

Efficient Selective Carbon Dioxide Separation via Task-Specific Ionic Liquids Incorporated in ZIF-8

Owing to the rapid increase in anthropogenic emission of carbon dioxide (CO2) in the atmosphere, which has resulted in a number of global climate challenges, a decrease in CO2 emissions is urgently needed in the current scenario. This study focuses on the development and characterization of composites for carbon dioxide (CO2) separation. The composites consist of two task-specific ionic liquids (TSILs), namely, tetramethylgunidinium imidazole [TMGHIM] and tetramethylgunidinium phenol [TMGHPhO], impregnated in ZIF-8. The performance of CO2 separation, including sorption capacity and selectivity, was evaluated for pristine ZIF-8 and composites of TMGHIM@ZIF-8 and TMGHPhO@ZIF-8. To demonstrate the thermal stability of the material, thermogravimetric analysis (TGA) was performed. Additionally, powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) were utilized to showcase the crystal structures and morphology. Fourier transform infrared spectroscopy (FTIR) and BET were also utilized to confirm the successful incorporation of TSILs into ZIF-8. The composite synthesized with TMGHIM@ZIF-8 demonstrated superior CO2 sorption performance as compared with TMGHPhO@ZIF-8. This is attributed to its strong attraction toward CO2, resulting in a higher CO2/CH4 selectivity of 110 while pristine MOFs showed 12 that is 9 times higher than that of the pristine ZIF-8. These TSILs@ZIF-8 composites have significant potential in designing sorbent materials for efficient acid gas separation applications.

Ionic-liquid-modified MOFs incorporated in a mixed-matrix membrane by metal-site anchoring for gas separation

Through metal-site anchoring, metal-organic frameworks (MOFs) were modified with ionic liquids (ILs) and used as a porous filler to prepare mixed-matrix membranes (MMMs). The targeted growth of the IL exposed more active sites and greatly enhanced CO2 transfer in the MMMs, which exhibited excellent gas separation performance and long durability.

Unexpected Energy Applications of Ionic Liquids

Ionic liquids and their various analogues are without doubt the scientific sensation of the last few decades, paving the way to a more sustainable society. Their versatile suite of properties, originating from an almost inconceivably large number of possible cation and anion combinations, allows tuning of the structure to serve a desired purpose. Ionic liquids hence offer a myriad of useful applications from solvents to catalysts, through to lubricants, gas absorbers, and azeotrope breakers. The purpose of this review is to explore the more unexpected of these applications, particularly in the energy space. It guides the reader through the application of ionic liquids and their analogues as i) phase change materials for thermal energy storage, ii) organic ionic plastic crystals, which have been studied as battery electrolytes and in gas separation, iii) key components in the nitrogen reduction reaction for sustainable ammonia generation, iv) as electrolytes in aluminum-ion batteries, and v) in other emerging technologies. It is concluded that there is tremendous scope for further optimizing and tuning of the ionic liquid in its task, subject to sustainability imperatives in line with current global priorities, assisted by artificial intelligence.