Reactivity of Metal Clusters

Effective oxidation and adsorption of As(III) in water by nanoconfined Ce-Mn binary oxides with excellent reusability

Herein, a highly efficient As(III) purifier Ce-Mn@N201 with excellent reusability was developed by stepwise precipitating hydrated cerium(IV) oxides (HCO) and hydrated manganese(IV) oxides (HMO) inside N201, a widely-used gel-type anion exchange resin. Owing to confinement of unique nanopores in N201, the in-situ generated nanoparticles (NPs) inside Ce-Mn@N201 were highly dispersed with ultra-small sizes of around 2.6 nm. Results demonstrated that HMO NPs effectively oxidized As(III) to As(V) with the conversion of Mn(IV) to Mn(II), while the generated Mn2+ was mostly re-adsorbed onto the negatively-charged surface of HMO NPs. During the regeneration process by simple alkaline treatment, the re-adsorbed Mn2+ was firstly precipitated as (hydr)oxides of Mn(II) and then oxidized to HMO NPs by dissolved oxygen to fully refresh its oxidation capacity. Though HCO NPs mainly served as adsorbent for arsenic, they could partially oxidize As(III) to As(V) at the beginning, while the oxidation capacities continuously diminished with the irreversible conversion of Ce(IV) to Ce(III). In 10 consecutive adsorption-regeneration cycle, Ce-Mn@N201 efficiently decontaminated As(III) from 500 μg/L to below 5 μg/L with Mn2+ leaching less than 0.3% per batch. During 3 cyclic fixed-bed adsorptions, Ce-Mn@N201 steadily produced 8500-9150 bed volume (BV) and 3150-3350 BV drinkable water from the synthesized and real groundwater, respectively, with Mn leaching in effluent constantly < 100 μg/L.

Observation of the Transition from Triple Bonds to Single Bonds between Ru-Ge Bonding in RuGeO(CO)n- (n = 3-5)

This work reports the observation and characterization of heterobinuclear transition-metal main-group metal oxide carbonyl complex anions, RuGeO(CO)n- (n = 3-5), by combining mass-selected photoelectron velocity map imaging spectroscopy and quantum chemistry calculations. The experimentally determined vertical electron detachment energy of RuGeO(CO)3- surpasses those of RuGeO(CO)4- and RuGeO(CO)5-, which is attributed to distinctive bonding features. RuGeO(CO)3- manifests one covalent σ and two Ru-to-Ge dative π bonds, contrasting with the sole covalent σ bond present in RuGeO(CO)4- and RuGeO(CO)5-. Unpaired spin density distribution analysis reveals a 17-electron configuration at the Ru center in RuGeO(CO)3- and an 18-electron configuration in RuGeO(CO)4- and RuGeO(CO)5-. This work closes a gap in the quantitative physicochemical characterization of heteronuclear oxide carbonyl complexes, enhancing our insights into catalytic processes of CO/GeO on the metal surface at the molecular level.

Going for Gold(-Standard): Attaining Coupled Cluster Accuracy in Oxide-Supported Nanoclusters

The structure of oxide-supported metal nanoclusters plays an essential role in their sharply enhanced catalytic activity over that of bulk metals. Simulations provide the atomic-scale resolution needed to understand these systems. However, the sensitive mix of metal-metal and metal-support interactions, which govern their structure, puts stringent requirements on the method used, requiring calculations beyond standard density functional theory (DFT). The method of choice is coupled cluster theory [specifically CCSD(T)], but its computational cost has so far prevented its application to these systems. In this work, we showcase two approaches to make CCSD(T) accuracy readily achievable in oxide-supported nanoclusters. First, we leverage the SKZCAM protocol to provide the first benchmarks of oxide-supported nanoclusters, revealing that it is specifically metal-metal interactions that are challenging to capture with DFT. Second, we propose a CCSD(T) correction (ΔCC) to the metal-metal interaction errors in DFT, reaching accuracy comparable to that of the SKZCAM protocol at significantly lower cost. This approach forges a path toward studying larger systems at reliable accuracy, which we highlight by identifying a ground-state structure in agreement with experiments for Au20 on MgO, a challenging system where DFT models have yielded conflicting predictions.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Direct probing of low-energy intra d-band transitions in gas-phase cobalt clusters

The interplay between constituent localized and itinerant electrons of metal clusters defines their physical and chemical properties. In turn, the electronic and geometrical structures are strongly entwined and exhibit strong size-dependent variations. Current understanding of low-energy excited states of metal clusters relies on stand-alone theoretical investigations and few comparisons with measured properties, since direct identification of low-lying states is lacking hitherto. Here, we report on the measurement of low-lying electronic transitions in cationic cobalt clusters using infrared photofragmentation spectroscopy. Broad and size-dependent absorption features were observed within 0.056 - 0.446 eV, well above the energies of the sharp absorption bands caused by cluster vibrations. Complementary time-dependent density functional theory calculations reproduce the main observed absorption features, providing direct evidence that they correspond to transitions between electronic states of mainly d-character, arising from the open d-shells of the Co atoms and the high spin multiplicity of the clusters.

Adsorption of Multiple NO Molecules on Anionic Gold Clusters: Electron Transfer and Disproportionation Enhanced by Molecular Aggregation

The reactions of Aun- clusters with multiple nitric oxide (NO) molecules are explored at 150 K by utilizing a mini-flow-tube reactor and a time-of-flight mass spectrometer. Adsorption of multiple NO molecules is observed on most Aun-, while disproportionation reactions only occur on even-sized Aun- with n = 4, 6, 8, 20 and odd-sized ones with n = 5 and 7. Theoretical calculations reveal the geometric structures and electronic states of the products containing bimolecular and trimolecular NO units, where two NO molecules typically form dimers. Different from NO monomers that weakly interact with odd-sized Aun- and form electron-sharing covalent bonds with Au10-(D3h) and Au16-, NO dimers can extract significant charge from parent Aun-. Regarding the three NO molecules, a predilection toward condensation into trimers on even-sized Aun- is observed, while the tendency is more toward an adsorption pattern of a dimer plus a monomer on odd-sized Aun-. The NO trimers register even higher charge gain from Aun- as compared with the NO dimers, which leads to an elevated degree of activation and induces the progression of disproportionation reactions. Therefore, when considering the reaction between NO and Aun-, it appears that NO has a propensity to form dimers or trimers on Aun-. This behavior of aggregate formation substantially enhances the ability of NO to absorb negative charges from Aun- although the occurrence of disproportionate dissociation reactions is initiated only for specific sizes.

Conversion of Methane at Room Temperature Mediated by the Ta-Ta σ-Bond

Metal-metal bonds constitute an important type of reactive centers for chemical transformation; however, the availability of active metal-metal bonds being capable of converting methane under mild conditions, the holy grail in catalysis, remains a serious challenge. Herein, benefiting from the systematic investigation of 36 metal clusters of tantalum by using mass spectrometric experiments complemented with quantum chemical calculations, the dehydrogenation of methane at room temperature was successfully achieved by 18 cluster species featuring σ-bonding electrons localized in single naked Ta-Ta centers. In sharp contrast, the other 18 remaining clusters, either without naked Ta-Ta σ-bond or with σ-bonding electrons delocalized over multiple Ta-Ta centers only exhibit molecular CH4-adsorption reactivity or inertness. Mechanistic studies revealed that changing cluster geometric configurations and tuning the number of simple inorganic ligands (e.g., oxygen) could flexibly manipulate the presence or absence of such a reactive Ta-Ta σ-bond. The discovery of Ta-Ta σ-type bond being able to exhibit outstanding activity toward methane conversion not only overturns the traditional recognition that only the metal-metal π- or δ-bonds of early transition metals could participate in bond activation but also opens up a new access to design of promising metal catalysts with dual-atom as reactive sites for chemical transformations.

Advances in Naked Metal Clusters for Catalysis

The properties of sub-nano metal clusters are governed by quantum confinement and their large surface-to-bulk ratios, atomically precise compositions and geometric/electronic structures. Advances in metal clusters lead to new opportunities in diverse aspects of sciences including chemo-sensing, bio-imaging, photochemistry, and catalysis. Naked metal clusters having synergic multiple active sites and coordinative unsaturation and tunable stability/activity enable researchers to design atomically precise metal catalysts with tailored catalysis for different reactions. Here we summarize the progress of ligand-free naked metal clusters for catalytic applications. It is anticipated that this review helps to better understand the chemistry of small metal clusters and facilitates the design and development of new catalysts for potential applications.

Machine Learning for Experimental Reactivity of a Set of Metal Clusters toward C-H Activation

Understanding the mechanisms of C-H activation of alkanes is a very important research topic. The reactions of metal clusters with alkanes have been extensively studied to reveal the electronic features governing C-H activation, while the experimental cluster reactivity was qualitatively interpreted case by case in the literature. Herein, we prepared and mass-selected over 100 rhodium-based clusters (RhxVyOz- and RhxCoyOz-) to react with light alkanes, enabling the determination of reaction rate constants spanning six orders of magnitude. A satisfactory model being able to quantitatively describe the rate data in terms of multiple cluster electronic features (average electron occupancy of valence s orbitals, the minimum natural charge on the metal atom, cluster polarizability, and energy gap involved in the agostic interaction) has been constructed through a machine learning approach. This study demonstrates that the general mechanisms governing the very important process of C-H activation by diverse metal centers can be discovered by interpreting experimental data with artificial intelligence.

Theoretical prediction of low-energy photoelectron spectra of AlnNi- clusters (n = 1-13)

CONTEXT

Mixed-metal clusters have long been studied because of their peculiar properties and how they change with cluster size, composition, and charge state and their potential roles in catalysis. The characterization of these clusters is therefore a very important issue. One of the main experimental tools for characterizing their electronic structure is photoelectron spectroscopy. Theoretical computation completes the task by fully determining the structural properties and matching the theoretical predictions to the measured spectra. We present density functional theory computations of the structural, magnetic, and electronic properties of negatively charged mixed AlnNi- clusters with up to 13 Al atoms. The lowest energy structures of the anionic clusters with up to 7 atoms are also found to be low-energy isomers of the neutral counterparts found in the literature. The 13-atom cluster is found to be a quartet and a perfect icosahedron. The predicted photoelectron spectra are also presented and can be used to interpret future experimental data. We also presented indicators that can be used to determine the potential of these systems for single-atom catalysis. These indicators point to smaller clusters to be more reactive as the gap between the Fermi energy and the center of the d-band increases with cluster size and that Ni occupies an internal site for n = 11-13. We speculate that reactivity can be enhanced if one adds an additional Ni atom.

METHODS

The DFT calculations were performed using the Becke exchange and Perdew-Wang/91 correlation functionals (BPW91), a DFT-optimized all-electron basis set for the aluminum atom, and the Stuttgart small core pseudopotential for the Ni atom. All of the computations used the Gaussian 03 software.

A luminescent Ag8(DPPY)6(PhCC)6 cluster with a triangular superatomic Ag8 core

We have synthesized single crystals of a highly stable Ag8 nanocluster protected by six ligands of diphenyl-2-phosphinic pyridine (DPPY) plus six ligands of phenylacetylene (PhCC). This Ag8(DPPY)6(PhCC)6 cluster bears a triangular superatomic Ag8 core, with the vertex and edge Ag atoms (quasi-triangle Ag6) being protected by both P and N bidentate coordination of the six DPPY ligands; meanwhile, the six PhCC ligands via μ3-C coordination form coordination on the two central Ag atoms capped on both sides of the triangle facet. Apart from the well-organized coordination of the two ligands pertaining to the balanced interactions with the Ag8 core, this Ag8 nanocluster exhibits superatomic stability with two delocalized valence electrons (1S2||1P0), assuming that the six PhCC ligands fix 6 localized electrons from the Ag atoms. Interestingly, the Ag8(DPPY)6(PhCC)6 NCs display temperature-dependent dual emissions at 330 and 535 nm under deep ultraviolet excitation. TD-DFT calculations reproduced the experimental spectrum, shedding light on the nature of excitation states and metal-ligand interactions in such a superatomic metal cluster.

Comparison of Cu3, Cu5, and Cu7 clusters as potential antioxidants: A theoretical quest

CONTEXT

Herein, we compare and contrast the dual roles of Cun clusters (n = 3, 5, and 7 atoms) in scavenging or generating RO• free radicals from ROH at the theoretical levels (where R = H, methyl, ethyl, n-propyl, i-propyl, n-butyl, t-butyl, and phenyl). This investigation is performed in water media to mimic the actual environment in the biological system. In the presence of the Cun clusters, bond dissociation energy (BDE) of RO-H and R-OH is reduced. This is clear evidence for the increased possibility of both the RO-H and R-OH bonds breakage and scavenging of RO• radicals. The nature of anchoring bonds responsible for the interaction of Cun clusters with ROH and RO• are interpreted using the quantum theory of atoms in molecules (QTAIM) and the natural bond orbital (NBO) analysis. The DFT results indicate that the O•⋅⋅⋅•Cu bond is stronger and has more covalent character in RO•⋅⋅⋅•Cun radical complexes than in ROH⋅⋅⋅•Cun. Therefore, the interactions of Cun clusters with RO• radicals (antioxidant) are more pronounced than their interactions with ROH non-radicals (pro-oxidant).

METHODS

The GAMESS software package was utilized in this paper. The B3LYP and M06 functions with the 6-311 +  + G(d,p), and LANL2DZ/SDD basis sets was used to perform the important geometrical parameters of RO•⋅⋅⋅•Cun and ROH⋅⋅⋅•Cun, binding energy (Eb), and bond dissociation energy (BDE).

Alkaline Earth Metal Superatom of W@Si16: Characterization of Group 6 Metal Encapsulating Si16 Cage on Organic Substrates

Transition metal atom (M)-encapsulating silicon cage nanoclusters (M@Si16) exhibit a superatomic nature, depending on the central M atom owing to the number of valence electrons and charge state on organic substrates. Since M@Si16 superatom featuring group 4 and 5 transition metal atoms exhibit rare-gas-like and alkali-like characteristics, respectively, group 6 transition metal atoms are expected to show alkaline earth-like behavior. In this study, M@Si16, comprising a central atom from group 6 (MVI = Cr, Mo, and W) were deposited on C60 substrates, and their electronic and chemical stabilities were investigated in terms of their charge state and chemical reactivity against oxygen exposures. In comparison to alkali-like Ta@Si16, the extent of charge transfer to the C60 substrate is approximately doubled, while the oxidative reactivity is subdued for MVI@Si16 on C60, especially for W@Si16. The results show that a divalent state of MVI@Si162+ appears on the C60 substrate, which is consistently calculated to be a symmetrical cage structure of W@Si162+ in C3v, revealing insights into the "periodic law" of M@Si16 superatoms pertaining to the characteristics of alkaline earth metals.

Assessing the efficacy of aluminum metal clusters Al13 and Al15 in mitigating NO2 and SO2 pollutants: a DFT investigation

The present investigation delves into the adverse environmental impact of atmospheric pollutant gases, specifically nitrogen dioxide (NO2) and sulfur dioxide (SO2), which necessitates the identification and implementation of effective control measures. The central objective of this study is to explore the eradication of these pollutants through the utilization of aluminum Al13 and Al15 metal clusters, distinguished by their unique properties. The comprehensive evaluation of gas/cluster interactions is undertaken employing density functional theory (DFT). Geometric optimization calculations for all structures are executed using the ωB97XD functional and the Def2-svp basis set. To probe various interaction modalities, gas molecule distribution around the metal clusters is sampled using the bee colony algorithm. Frequency calculations employing identical model chemistry validate the precision of the optimization calculations. The quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) methodologies are applied for the analysis of intermolecular interactions. This research establishes the robust formation of van der Waals attractions between the investigated gas molecules, affirming aluminum metal clusters as viable candidates for the removal and control of these gases.

Theoretical study of NH3 , H2 S, and HCN adsorption enhancement on defective graphene-supported Cu19 clusters

Recent studies have shown that graphene-supported metal clusters can enhance catalytic reactivity compared with corresponding metal clusters. In this study, the adsorptions of NH3 , H2 S, and HCN on Cu19 and defective graphene-supported Cu19 clusters are investigated using plane-wave density functional theory. The results reveal the three gas molecules can be adsorbed on three types of top sites of Cu atoms, respectively. The adsorption energies of the corresponding adsorption sites on the defective graphene-supported Cu19 clusters are all increased compared with those on the Cu19 clusters. The orbital-resolved, crystal orbital Hamilton population analysis demonstrates that the larger the integrated crystal orbital Hamilton population, the stronger the adsorption between the gas molecule and the bonded Cu atom. The center of antibonding states on the defective graphene-supported Cu19 is shifted upward relative to Fermi level compared to the corresponding one on pure Cu19 , which explains the enhanced adsorption energy on defective graphene-supported Cu19. In addition, the closer d-band center to the Fermi level on the defective graphene-supported Cu19 indicates a stronger adsorption capacity than on pure Cu19 .

Al8 Cluster-Based Metal Halide Frameworks: Balancing Singlet-Triplet Excited States to Achieve White Light and Multicolor Luminescence

Luminescent metal clusters have attracted great interest in current research; however, the design synthesis of Al clusters with color-tunable luminescence remains challenging. Herein, an [Al8 (OH)8 (NA)16 ] (Al8 , HNA = nicotinic acid) molecular cluster with dual luminescence properties of fluorescence and room-temperature phosphorescence (RTP) is synthesized by choosing HNA ligand as phosphor. Its prompt photoluminescence (PL) spectrum exhibits approximately white light emission at room temperature. Considering that halogen atoms can be used to regulate the RTP property by balancing the singlet and triplet excitons, different CdX2 (X- = Cl- , Br- , I- ) are introduced into the reactive system of the Al8 cluster, and three new Al8 cluster-based metal-organic frameworks, {[Al8 Cd3 Cl5 (OH)8 (NA)17 H2 O]·2HNA}n (CdCl2 -Al8 ), {[Al8 Cd4 Br7 (OH)8 (NA)16 CH3 CN]·NA·HNA}n (CdBr2 -Al8 ) and {[Al8 Cd8 I16 (OH)8 (NA)16 ]}n (CdI2 -Al8 ) are successfully obtained. They realize the color tunability from blue to yellow at room temperature. The origination of fluorescence and phosphorescence has also been illustrated by structure-property analysis and theoretical calculation. This work provides new insights into the design of multicolor luminescent metal cluster-based materials and develops advanced photo-functional materials for multicolor display, anti-counterfeiting, and encryption applications.

Reactivity of cationic silver clusters with O2: a probe of interplay between clusters' geometric and electronic structures

We explored the size-dependent reactivity of Agn+ (n = 2-22) with O2 under mild conditions and found that only a few sizes of Agn+, with even values of n = 4, 6, 12, 16, 18, and 22, are reactive. Possible structures of Agn+ (n = 2-22) were determined using a genetic algorithm with incomplete local optimizations at the DFT level, and the calculated bonding strengths of O2 on these structures are consistent with experimental observations. Analyses revealed a close relationship between the reactivity of Agn+ with O2 and its HOMO-LUMO gap: cationic silver clusters with a small HOMO-LUMO gap are reactive, which can be rationalized by the covalent character of chemical bonds between Agn+ and O2 involving their frontier orbitals. The peculiar size-dependent HOMO-LUMO gaps and reactivity with O2 correlate with the subtle interplay between the electronic configurations and geometric structures of these silver cluster cations.

To What Extent Do Iodomethane and Bromomethane Undergo Analogous Reactions?

Iodomethane and bromomethane (CH3I/CH3Br) are common chemicals, but their chemistry on nanometals is not fully understood. Here, we analyze the reactivity of Rhn+ (n = 3-30) clusters with halomethanes and unveil the spin effect and concentration dependence in the C-H and C-X bond activation. It is found that the reactions under halomethane-rich conditions differ from those under metal-rich conditions. Both CH3I and CH3Br undergo similar dehydrogenation on the Rhn+ clusters in the presence of small quantity reactants; however, different reactions are observed in the presence of sufficient CH3I/CH3Br, showing dominant Rh(CH3Br)x+ (x = 1-4) products but a series of RhnCxHyIz+ species (x = 1-4, y = 1-12, and z = 1-5) pertaining to H2, HI, or CH4 removal. Density functional theory calculations reveal that the dehydrogenation and demethanation of CH3Br are relatively less exothermic and will be deactivated by sufficient gas collisions if helium cooling takes away energy immediately; instead, the successive adsorption of CH3Br gives rise to a series of Rh(CH3Br)x+ species with accidental C-Br bond dissociation.

Thermal Reactions of NiAl3O6+ and Al4O6+ with Methane: Reactivity Enhancement by Doping

Investigation of the reactivity of heteronuclear metal oxide clusters is an important way to uncover the molecular-level mechanisms of the doping effect. Herein, we performed a comparative study on the reactions of CH4 with NiAl3O6+ and Al4O6+ cluster cations at room temperature to understand the role of Ni during the activation and transformation of methane. Mass spectrometric experiments identify that both NiAl3O6+ and Al4O6+ could bring about hydrogen atom abstraction reaction to generate CH3• radical; however, only NiAl3O6+ has the potential to stabilize [CH3] moiety and then transform [CH3] to CH2O. Density functional theory calculations demonstrate that the terminal oxygen radicals (Ot-•) bound to Al act as the reactive sites for the two clusters to activate the first C-H bond. Although the Ni atom cannot directly participate in methane activation, it can manipulate the electronic environment of the surrounding bridging oxygen atoms (Ob) and enable such Ob to function as an electron reservoir to help Ot-• oxidize CH4 to [H-O-CH3]. The facile reduction of Ni3+ to Ni+ also facilitates the subsequent step of activating the second C-H bond by the bridging "lattice oxygen" (Ob2-), finally enabling the oxidation of methane into formaldehyde. The important role of the dopant Ni played in improving the product selectivity of CH2O for methane conversion discovered in this study allows us to have a possible molecule-level understanding of the excellent performance of the catalysts doping with nickel.

Tandem Nitrate-to-Ammonia Conversion on Atomically Precise Silver Nanocluster/MXene Electrocatalyst

Electrocatalytic reduction of nitrate (NO3 RR) to synthesize ammonia (NH3 ) provides a competitive manner for carbon neutrality and decentralized NH3 synthesis. Atomically precise nanoclusters, as an advantageous platform for investigating the NO3 RR mechanisms and actual active sites, remain largely underexplored due to the poor stability. Herein, we report a (NH4 )9 [Ag9 (mba)9 ] nanoclusters (Ag9 NCs) loaded on Ti3 C2 MXene (Ag9 /MXene) for highly efficient NO3 RR performance towards ambient NH3 synthesis with improved stability in neutral medium. The composite structure of MXene and Ag9 NCs enables a tandem catalysis process for nitrate reduction, significantly increasing the selectivity and FE of NH3 . Besides, compared with individual Ag9 NCs, Ag9 /MXene has better stability with the current density performed no decay after 108 hours of reaction. This work provides a strategy for improving the catalytic activity and stability of atomically precise metal NCs, expanding the mechanism research and application of metal NCs.

Dual-Valence Characteristics of Be11: Tin/Lead-like Superatom

To enhance the superatom family, the new superatom analogue Be11 of group IVA elements has been developed. Be11 can exhibit multiple valence states (+2 and +4), similar to carbon-group elements, and is capable of forming stable ionic compounds with other atoms such as carbon, chalcogen, (super)halogen, and hydroxyl. This resembles how tin and lead atoms combine with these elements to form stable molecules. Their special stability can be rationalized from the perspective of a cluster shell model. Sn or Pb could be the nearest atomic analogue to Be11 in group IVA, as the +2 oxidation state is more stable than the +4 oxidation state. This comparative investigation highlights the resemblance between Be11 and carbon-group elements, which encourages additional exploration within the superatom family.

[Au14(2-SAdm)9(Dppe)2]+: a gold nanocluster with a crystallization-induced emission enhancement phenomenon

In this work, a gold nanocluster [Au14(2-SAdm)9(Dppe)2]+ was synthesized and structurally determined by X-ray crystallography. The crystals of this cluster exhibit a 50-fold enhancement in quantum yield (5.05% for crystals) compared with its solution. Crystallographic analysis reveals that the weak intermolecular interactions (C-H⋯π, π⋯π) can inhibit the molecular vibration and thus generate the crystallization-induced emission enhancement phenomenon.

Metal Clusters Based Multifunctional Materials for Solar Cells

As a multifunctional material, metal clusters have recently received some attention for their application in solar cells.This review delves into the multifaceted role of metal clusters in advancing solar cell technologies, covering diverse aspects from electron transport and interface modification to serving as molecular precursors for inorganic materials and acting as photosensitizers in metal-cluster sensitized solar cells (MCSSCs). The studies conducted by various researchers illustrate the crucial impact of metal clusters, such as gold nanoclusters (Au NCs), on enhancing solar cell efficiency through size-dependent effects, distinct interface behaviors, and tailored interface engineering. From optimizing charge transfer rates to improving light absorption and reducing carrier recombination, metal clusters prove instrumental in shaping the landscape of solar energy conversion.The promising performance of metal-cluster sensitized solar cells, coupled with their scalability and flexibility, positions them as a exciting avenue for future clean energy applications. The article concludes by emphasizing the need for continued interdisciplinary research and technological innovation to unlock the full potential of metal clusters in contributing to sustainable and high-performance solar cells.

Binding Properties of Small Electrophilic Anions [B6 X5 ]- and [B10 X9 ]- (X=Cl, Br, I): Activation of Small Molecules Based on π-Backbonding

Superelectrophilic anions constitute a special class of molecular anions that show strong binding of weak nucleophiles despite their negative charge. In this study, the binding characteristics of smaller gaseous electrophilic anions of the types [B6 X5 ]- and [B10 X9 ]- (with X=Cl, Br, I) were computationally and experimentally investigated and compared to those of the larger analogues [B12 X11 ]- . The positive charge of vacant boron increases from [B6 X5 ]- via [B10 X9 ]- to [B12 X11 ]- , as evidenced by increasing attachment enthalpies towards typical σ-donor molecules (noble gases, H2 O). However, this behavior is reversed for σ-donor-π-acceptor molecules. [B6 Cl5 ]- binds most strongly to N2 and CO, even more strongly than to H2 O. Energy decomposition analysis confirms that the orbital interaction is responsible for this opposite trend. The extended transition state natural orbitals for chemical valence method shows that the π-backdonation order is [B6 X5 ]- >[B10 X9 ]- >[B12 X11 ]- . This predicted order explains the experimentally observed red shifts of the CO and N2 stretching fundamentals compared to those of the unbound molecules, as measured by infrared photodissociation spectroscopy. The strongest red shift is observed for [B6 Cl5 N2 ]- : 222 cm-1 . Therefore, strong activation of unreactive σ-donor-π-acceptor molecules (commonly observed for cationic transition metal complexes) is achieved with metal-free molecular anions.

Quantitative Aspects of Gas-Phase Metal Ion Chemistry: Conservation of Spin, Participation of f Orbitals, and C-H Activation and C-C Coupling

In this Featured Article, I reflect on over 40 years of guided ion beam tandem mass spectrometry (GIBMS) studies involving atomic metal cations and their clusters throughout the periodic table. Studies that have considered the role of spin conservation (or lack thereof) are a primary focus with a quantitative assessment of the effects examined. A need for state-specific studies of heavier elements is noted, as is a more quantitative assessment of spin-orbit interactions in reactivity. Because GIBMS experiments explicitly evaluate the kinetic energy dependence of reactions over a wide range, several interesting and unusual observations are highlighted. More detailed studies of such unusual reaction events would be welcome. Activation of C-H bonds and ensuing C-C coupling events are reviewed, with future work encouraged. Finally, studies of lanthanides and actinides are examined with an eye on understanding the role of f orbitals in the chemistry, both as participants (or not) in the bonding and as sources/sinks of electron density. This area seems to be ripe for more quantitative experiments.

Probing adsorption of methane onto vanadium cluster cations via vibrational spectroscopy

Photofragment spectroscopy is used to measure the vibrational spectra of V2+(CH4)n (n = 1-4), V3+(CH4)n (n = 1-3), and Vx+(CH4) (x = 4-8) in the C-H stretching region (2550-3100 cm-1). Spectra are measured by monitoring loss of CH4. The experimental spectra are compared to simulations at the B3LYP+D3/6-311++G(3df,3pd) level of theory to identify the geometry of the ions. Multi-reference configuration interaction with Davidson correction (MRCI+Q) calculations are also carried out on V2+ and V3+. The methane binding orientation in V2+(CH4)n (n = 1-4) evolves from η3 to η2 as more methane molecules are added. The IR spectra of metal-methane clusters can give information on the structure of metal clusters that may otherwise be hard to obtain from isolated clusters. For example, the V3+(CH4)n (n = 1-3) experimental spectra show an additional peak as the second and third methane molecules are added to V3+, which indicates that the metal atoms are not equivalent. The Vx+(CH4) show a larger red shift in the symmetric C-H stretch for larger clusters with x = 5-8 than for the small clusters with x = 2, 3, indicating increased covalency in the interaction of larger vanadium clusters with methane.

Mechanism and dynamics of Baeyer-Villiger oxidation of furfural to maleic anhydride in presence of H2O2 and Au clusters

CONTEXT

The increasing demand for fuels and chemicals in the world has prompted the exploration of various forms of renewable energy resources. Using C5-based furfural as the platform to replace the fossil energy resources is greatly attractive because of its abundance and environmental friendliness. Here we study the activity, selectivity, and possible reaction pathways for the Baeyer-Villiger oxidation of furfural over small Au clusters using hydrogen peroxide as oxidant. Furfural reacts with hydrogen peroxide in the presence of the catalysts with 93% selectivity towards maleic anhydride. Natural population analysis, frontier molecular orbital analysis, and spectroscopic analysis are used to illustrate the interaction mechanism between C5H4O2, H2O2, and Au. Reaction pathways leading to the formation of maleic anhydride are also explored. The reaction of C5H4O2 with H2O2 in the absence of a catalyst bears a relatively high transition state energy barrier of 2.98 eV for the first step involving absorption of H atom of H2O2 on the -OH group of C5H4O2. This is in agreement with the blank experiment where there were rare oxidation products observed in the absence of the metal cluster catalysts. On the other hand, transition state energies in the presence of the Au metal clusters are lower and the most feasible pathway is where the substrate and H2O2 co-bind on the Au catalyst and H2O2 molecule transfers an oxygen to the substrate, leading to the cleavage of the O-O bond.

METHODS

DFT calculations were done with B3PW91 functional. 6-311G(df, p) basis set was used for C, O, and H and aug-cc-pVDZ-PP was used for gold atoms. Gaussian 09 software was used for the calculations. Multiwfn 3.7 dev was used for the quantum theory of atoms-in-molecules (QTAIM) investigations.

Modeling Single-Atom Catalysis

Electronic structure calculations represent an essential complement of experiments to characterize single-atom catalysts (SACs), consisting of isolated metal atoms stabilized on a support, but also to predict new catalysts. However, simulating SACs with quantum chemistry approaches is not as simple as often assumed. In this work, the essential factors that characterize a reliable simulation of SACs activity are examined. The Perspective focuses on the importance of precise atomistic characterization of the active site, since even small changes in the metal atom's surroundings can result in large changes in reactivity. The dynamical behavior and stability of SACs under working conditions, as well as the importance of adopting appropriate methods to solve the Schrödinger equation for a quantitative evaluation of reaction energies are addressed. The Perspective also focuses on the relevance of the model adopted. For electrocatalysis this must include the effects of the solvent, the presence of electrolytes, the pH, and the external potential. Finally, it is discussed how the similarities between SACs and coordination compounds may result in reaction intermediates that usually are not observed on metal electrodes. When these aspects are not adequately considered, the predictive power of electronic structure calculations is quite limited.

Solar driven CO2 hydrogenation to HCOOH on (TiO2)n (n = 1-6) atomic clusters

Artificial photosynthesis is a crucial reaction that addresses energy and environmental challenges by converting CO2 into fuels and value-added chemicals. However, efficient catalytic activity using earth-abundant materials can be challenging due to intrinsic limitations. Herein, we explore neutral (TiO2)n (n = 1-6) atomic clusters for CO2 hydrogenation via comprehensive ab initio calculations combined with time-dependent functional theory. Our results show that these (TiO2)n clusters exhibit outstanding thermodynamic stabilities and decent surficial activities for CO2 activation and H2 dissociation, both of which possess kinetic barriers down to 0-0.74 eV. We establish a relationship between the binding strength of *CO2 species and electron characterization for these (TiO2)n clusters. These clusters, which have a wide energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccpied molecular orbital (LUMO) that allows them to harvest the solar light in the ultraviolet regime, enabling efficient catalysis for driving the catalysis of CO2 conversion. They provide exclusive reaction channels and high selectivity for yielding HCOOH products via the carboxyl mechanism, involving the kinetic barrier of the limiting step of 0.74-1.25 eV. We also investigated the substrate effect on supported (TiO2)n clusters, with non-metallic substrates featuring inert surfaces serving as suitable options for anchoring (TiO2)n clusters while preserving their intrinsic activity and selectivity. These computational results have significant implications not only for meeting energy demands but also for mitigating carbon emissions by utilizing CO2 as an alternative feedstock rather than considering it solely as a greenhouse gas.

Activation of Methane by Rhodium Clusters on a Model Support C20H10

Supported metals represent an important family of catalysts for the transformation of the most stable alkane, methane, under mild conditions. Here, using state-of-the-art mass spectrometry coupled with a newly designed double ion trap reactor that can run at high temperatures, we successfully immobilize a series of Rhn- (n = 4-8) cluster anions on a model support C20H10. Reactivity measurements at room temperature identify a significantly enhanced performance of large-sized Rh7,8C20H10- toward methane activation compared to that of free Rh7,8-. The "support" acting as an "electron sponge" is emphasized as the key factor to improve the reactivity of large-sized clusters, for which the high electron-withdrawing capability of C20H10 dramatically shifts the active Rh atom from the apex position in free Rh7- to the edge position in "supported" Rh7- to enhance CH4 adsorption, while the flexibility of C20H10 to release electrons further promotes subsequent C-H activation. The Rh atoms in direct contact with the support serve as electron-relay stations for electron transfer between C20H10 and the active Rh atom. This work not only establishes a novel approach to prepare and measure the reactivity of "supported" metal clusters in isolated gas phase but provides useful atomic-scale insights for understanding the chemical behavior of carbon (e.g., graphene)-supported metals in heterogeneous catalysis.

Ab Initio Molecular Dynamics Study of H2 Dissociation Mechanisms on Cu13 and Defective Graphene-supported Cu13 Clusters: Active Sites, Energy Barriers and Adsorption States

Ab initio molecular dynamics calculations were performed to study H2 dissociation mechanisms on Cu13 and defective graphene-supported Cu13 clusters. The study reveals that seven types of corresponding dissociation processes are found on the two clusters. The average dissociation energy barriers are 0.51 eV on the Cu13 cluster and 0.12 eV on the defective graphene-supported Cu13 cluster, which are lowered by ~19 % and ~81 % compared with the pristine Cu(111) surface, respectively. Furthermore, compared with the pure Cu13 cluster, the average dissociation energy barrier on the defective graphene-supported Cu13 cluster is substantially reduced by about 76 %. The preferred dissociation mechanisms on the two clusters are H2 located at a top-bridge site with the barrier heights of 0.30 eV on the Cu13 cluster and -0.31 eV on the defective graphene-supported Cu13 cluster. Analysis of the H-Cu bond interactions in the transition states shows that the antibonding-orbital center shifts upward on the defective graphene-supported Cu13 cluster compared with the one on the Cu13 cluster, which explains the reduction of the dissociation energy barrier. The average adsorption energy of dissociated H atoms is also greatly enhanced on the defective graphene-supported Cu13 cluster, about twice that on the Cu13 cluster.

Nuclear quantum dynamics on the ground electronic state of neutral silver dimer 107Ag109Ag probed by femtosecond NeNePo spectroscopy

The nuclear quantum dynamics on the ground electronic state of the neutral silver dimer 107Ag109Ag are studied by femtosecond (fs) pump-probe spectroscopy using the 'negative ion - to neutral - to positive ion' (NeNePo) excitation scheme. A vibrational wave packet is prepared on the X1Σ+g state of Ag2via photodetachment of mass-selected, cryogenically cooled Ag2- using a first ultrafast pump laser pulse. The temporal evolution of the wave packet is then probed by an ultrafast probe pulse via resonant multiphoton ionization to Ag2+. Frequency analysis of the fs-NeNePo spectra obtained for a single isotopologue and pump-probe delay times up to 60 ps yields the harmonic (ωe = 192.2 cm-1), quadratic anharmonic (ωexe = 0.637 cm-1) and cubic anharmonic (ωeye = 3 × 10-4 cm-1) constants for the X1Σ+g state of neutral Ag2. The fs-NeNePo spectra obtained at different pump wavelengths provide insight into the excitation mechanism. At a pump wavelength of 510 nm instead of 1010 nm, resonant excitation of a short-lived electronically excited state of the anion followed by autodetachment results in population of higher-energy vibrational levels of the neutral ground state. In contrast, at 1140 nm dynamics with a slightly shorter beating period and different relative phase are observed. The present study demonstrates that isotopologue-specific fs-NeNePo spectroscopy provides accurate vibrational constants of mass-selected neutral clusters in their electronic ground state in the terahertz spectral region, which remains difficult to obtain directly in the frequency domain with any other type of spectroscopy of comparable sensitivity.

Structures, Electronic, and Magnetic Properties of CoKn (n = 2-12) Clusters: A Particle Swarm Optimization Prediction Jointed with First-Principles Investigation

Transition-metal-doped clusters have long been attracting great attention due to their unique geometries and interesting physical and/or chemical properties. In this paper, the geometries of the lowest- and lower-energy CoKn (n = 2-12) clusters have been screened out using particle swarm optimization and first principles relaxation. The results show that except for CoK2 the other CoKn (n = 3-12) clusters are all three-dimensional structures, and CoK7 is the transition structure from which the lowest energy structures are cobalt atom-centered cage-like structures. The stability, the electronic structures, and the magnetic properties of CoKn clusters (n = 2-12) clusters are further investigated using the first principles method. The results show that the medium-sized clusters whose geometries are cage-like structures are more stable than smaller-sized clusters. The electronic configuration of CoKn clusters could be described as 1S1P1D according to the spherical jellium model. The main components of petal-shaped D molecular orbitals are Co-d and K-s states or Co-d and Co-s states, and the main components of sphere-like S molecular orbitals or spindle-like P molecular orbitals are K-s states or Co-s states. Co atoms give the main contribution to the total magnetic moments, and K atoms can either enhance or attenuate the total magnetic moments. CoKn (n = 5-8) clusters have relatively large magnetic moments, which has a relation to the strong Co-K bond and the large amount of charge transfer. CoK4 could be a magnetic superatom with a large magnetic moment of 5 μB.

Electronic structure modulation of Pdn (n = 2-5) nanoclusters in the hydrogenation of cinnamaldehyde

Studying the modulation of nanoclusters at an atomic scale is essential to comprehend the connection between properties and catalytic performance. Herein, we synthesized and characterized Pd_n (n = 2-5) nanoclusters coordinated with di-1-adamantylphosphine. Pd₅ nanoclusters showed the best catalytic performance (conversion = 99.3%, selectivity = 95.3%) for the hydrogenation of cinnamaldehyde to hydrocinnamaldehyde, with XPS identifying Pd^δ+ as the key active component. This work aimed to explore the relationship among the number of Pd atoms, their electronic structure and catalytic activity.

High-temperature reactivity of vanadium oxide clusters in methane activation: Vibrational degrees of freedom matter

Understanding the properties of small particles working under high-temperature conditions at the atomistic scale is imperative for exact control of related processes, but it is quite challenging to achieve experimentally. Herein, benefitting from state-of-the-art mass spectrometry and by using our newly designed high-temperature reactor, the activity of atomically precise particles of negatively charged vanadium oxide clusters toward hydrogen atom abstraction (HAA) from methane, the most stable alkane molecule, has been measured at elevated temperatures up to 873 K. We discovered the positive correlation between the reaction rate and cluster size that larger clusters possessing greater vibrational degrees of freedom can carry more vibrational energies to enhance the HAA reactivity at high temperature, in contrast with the electronic and geometric issues that control the activity at room temperature. This finding opens up a new dimension, vibrational degrees of freedom, for the simulation or design of particle reactions under high-temperature conditions.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

A luminescent Cu4 cluster film grown by electrospray deposition: a nitroaromatic vapour sensor

We present the fabrication and use of a film of a carborane-thiol-protected tetranuclear copper cluster with characteristic orange luminescence using ambient electrospray deposition (ESD). Charged microdroplets of the clusters produced by an electrospray tip deposit the clusters at an air-water interface to form a film. Different microscopic and spectroscopic techniques characterized the porous surface structure of the film. Visible and rapid quenching of the emission of the film upon exposure to 2-nitrotoluene (2-NT) vapours under ambient conditions was observed. Density functional theory (DFT) calculations established the favourable binding sites of 2-NT with the cluster. Desorption of 2-NT upon heating recovered the original luminescence, demonstrating the reusability of the sensor. Stable emission upon exposure to different organic solvents and its quenching upon exposure to 2,4-dinitrotoluene and picric acid showed selectivity of the film to nitroaromatic species.

Probing the binding and activation of small molecules by gas-phase transition metal clusters via IR spectroscopy

Isolated transition metal clusters have been established as useful models for extended metal surfaces or deposited metal particles, to improve the understanding of their surface chemistry and of catalytic reactions. For this objective, an important milestone has been the development of experimental methods for the size-specific structural characterization of clusters and cluster complexes in the gas phase. This review focusses on the characterization of molecular ligands, their binding and activation by small transition metal clusters, using cluster-size specific infrared action spectroscopy. A comprehensive overview and a critical discussion of the experimental data available to date is provided, reaching from the initial results obtained using line-tuneable CO₂ lasers to present-day studies applying infrared free electron lasers as well as other intense and broadly tuneable IR laser sources.

General Method to Synthesize Highly Stable Nanoclusters via Pickering-Stabilized Microemulsions

The ability to not only control but also maintain the well-defined size of nanoclusters is key to a scientific understanding as well as their practical application. Here, we report a synthetic protocol to prepare and stabilize nanoclusters of different metals and even metal salts. The approach builds on a Pickering stabilization effect inside a microemulsion system. We prove that the emulsion interface plays a critical role in the formation of nanoclusters, which are encapsulated in situ into a silica matrix. The resulting nanocapsule is characterized by a central cavity and a porous shell composed of a matrix of both silica and nanoclusters. This structure endows the nanoclusters simultaneously with high thermal stability, good biocompatibility, and excellent photostability, making them well suited for fundamental studies and practical applications ranging from materials chemistry, catalysis, and optics to bioimaging.

Site Selectivity for the Spin States and Spin Crossover in Undecanuclear Heterometallic Cyanido-Bridged Clusters

Polynuclear molecular clusters offer an opportunity to design new hierarchical switchable materials with collective properties, based on variation of the chemical composition, size, shapes, and overall building blocks organization. In this study, we rationally designed and constructed an unprecedented series of cyanido-bridged nanoclusters realizing new undecanuclear topology: Fe^II[Fe^II(bzbpen)]₆[W^V(CN)₈]₂[W^IV(CN)₈]₂·18MeOH (1), Na^I[Co^II(bzbpen)]₆[W^V(CN)₈]₃[W^IV(CN)₈]·28MeOH (2), Na^I[Ni^II(bzbpen)]₆[W^V(CN)₈]₃[W^IV(CN)₈]·27MeOH (3), and Co^II[Co^II(R/S-pabh)₂]₆[W^V(CN)₈]₂[W^IV(CN)₈]₂·26MeOH [4R and 4S; bzbpen = N¹,N²-dibenzyl-N¹,N²-bis(pyridin-2-ylmethyl)ethane-1,2-diamine; R/S-pabh = (R/S)-N-(1-naphthyl)-1-(pyridin-2-yl)methanimine], of size up to 11 nm³, ca. 2.0 × 2.2 × 2.5 nm (1-3) and ca. 1.4 × 2.5 × 2.5 nm (4). 1, 2, and 4 exhibit site selectivity for the spin states and spin transition related to the structural speciation based on subtle exogenous and endogenous effects imposed on similar but distinguishable 3d metal-ion-coordination moieties. 1 exhibits a mid-temperature-range spin-crossover (SCO) behavior that is more advanced than the previously reported SCO clusters based on octacyanidometallates and an onset of SCO behavior close to room temperature. The latter feature is also present in 2 and 4, which suggests the emergence of Co^II-centered SCO not observed in previous bimetallic cyanido-bridged Co^II-W^V/IV systems. In addition, reversible switching of the SCO behavior in 1 via a single-crystal-to-single-crystal transformation during desolvation was also documented.

Engineering magic number Au19 and Au20 cage structures using electron withdrawing atoms

Gold cages are a subset of gold nanoparticles and these structures are of major interest due to their favourable physiochemical properties. In order for these structures to be useful in applications, they must be chemically stable. The objective of this research is to transform non-magic number cage structures into magic number cage structures by the addition of electron-withdrawing groups on the cages. The electronic properties for Au₁₉X and Au₂₀X₂ (X = F, Cl, Br, I) are calculated and observed. It is expected that the electron-withdrawing groups will remove the electron density from the gold cages and leave them positively charged. We first optimize the geometries of the initial gold cages and verify the structures are a local minima. From there, we attach our halogens to the gold cages and optimize the structures to determine the NICS values and HOMO-LUMO gaps. NICS values were found to be more negative when a more electronegative halogen was used. Calculations have found that Au₁₉F and Au₂₀F₂ have the most negative NICS values, indicating greater spherical aromaticity. Iodine, being the least electronegative atom, had the most positive NICS value and smallest HOMO-LUMO gap. All calculations are compared to the magic cluster Au₁₈ which satisfies Hirsh's 2(N + 1)² rule for n = 2.

Principles of isomer stability in small clusters

In this work we study isomers of several representative small clusters to find principles for their stability. Our conclusions about the principles underlying the structure of clusters are based on a huge database of 44 000 isomers generated for 58 different clusters on the density functional theory level by Minima Hopping. We explore the potential energy surface of small neutral, anionic and cationic isomers, moving left to right across the third period of the periodic table and varying the number of atoms n and the cluster charge state q (X ^q _n , with X = {Na, Mg, Al, Si, Ge}, q = -1, 0, 1, 2). We use structural descriptors such as bond lengths and atomic coordination numbers, the surface to volume ratios and the shape factor as well as electronic descriptors such as shell filling and hardness to detect correlations with the stability of clusters. The isomers of metallic clusters are found to be structure seekers with a strong tendency to adopt compact shapes. However certain numbers of atoms can suppress the formation of nearly spherical metallic clusters. Small non-metallic clusters typically also do not adopt compact spherical shapes for their lowest energy structures. In both cases spherical jellium models are not any more applicable. Nevertheless for many structures, that frequently have a high degree of symmetry, the Kohn-Sham eigenvalues are bunched into shells and if the available electrons can completely fill such shells, a particularly stable structure can result. We call such a cluster whose shape gives rise to shells that can be completely filled by the number of available electrons an optimally matched cluster, since both the structure and the number of electrons must be special and match. In this way we can also explain the stability trends for covalent silicon and germanium cluster isomers, whose stability was previously explained by the presence of certain structural motifs. Thus we propose a unified framework to explain trends in the stability of isomers and to predict their structure for a wide range of small clusters.

New Insights into Adsorption Properties of the Tubular Au26 from AIMD Simulations and Electronic Interactions

Recently, we revealed the electronic nature of the tubular Au₂₆ based on spherical aromaticity. The peculiar structure of the Au₂₆ could be an ideal catalyst model for studying the adsorptions of the Au nanotubes. However, through Google Scholar, we found that no one has reported connections between the structure and reactivity properties of Au₂₆. Here, three kinds of molecules are selected to study the fundamental adsorption behaviors that occur on the surface of Au₂₆. When one CO molecule is adsorbed on the Au₂₆, the σ-hole adsorption structure is quickly identified as belonging to a ground state energy, and it still maintains integrity at a temperature of 500 K, where σ donations and π-back donations take place; however, two CO molecules make the structure of Au₂₆ appear with distortions or collapse. When one H₂ is adsorbed on the Au₂₆, the H-H bond length is slightly elongated due to charge transfers to the anti-bonding σ* orbital of H₂. The Au₂₆-H₂ can maintain integrity within 100 fs at 300 K and the H₂ molecule starts moving away from the Au₂₆ after 200 fs. Moreover, the Au₂₆ can act as a Lewis base to stabilize the electron-deficient BH₃ molecule, and frontier molecular orbitals overlap between the Au₂₆ and BH₃.

A stable superatomic Cu6(SMPP)6 nanocluster with dual emission

We have synthesized single crystals of a highly stable Cu₆ nanocluster protected by six ligands of 2-mercapto-5-n-propylpyrimidine (SMPP). This Cu₆(SMPP)₆ cluster has a quasi-octahedral superatomic Cu₆ core, with the Cu atoms being protected by both -S- and N-bidentate coordination of the SMPP ligands. Interestingly, each Cu atom is linked with an N atom, while the two neighboring Cu atoms on the same triangular facet are linked by the -S- bridge of the ligand. Single-crystal parsing results show that the altered orientation of the SMPP ligands give rise to three packing modes (named as 1, 2, and 3) of the Cu₆(SMPP)₆ NCs. Apart from the well-organized coordination, this Cu₆(SMPP)₆ nanocluster exhibits superatomic stability with a metallic core of 4 valence electrons (1S²2S²||3S²), enabling to largely balance the interactions between the polynuclear core and delocalized electrons. Interestingly, the Cu₆(SMPP)₆ NCs display dual emissions in both ultraviolet-visible (UV-Vis) and near-infrared (NIR) regions. First-principles calculations well reproduce the experimental spectrum, shedding light on the nature of excitation states and metal-ligand interactions in the Cu₆(SMPP)₆ cluster.

Room-Temperature Conversion of Methane to Methanediol by [FeO2]. J Phys Chem Lett 2023;14:1633-1640. [PMID: 36752636 DOI: 10.1021/acs.jpclett.2c03786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Inspired by the activities of P-450 enzyme and Rieske oxygenases in nature, in which the high-valent Fe-oxo complexes play a key role for oxidation of alkanes, the oxidation process of methane by the high-valent iron oxide cation [FeO₂]⁺ has been explored by using Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometry complemented by high-level quantum chemical calculations. In contrast to the previously reported [FeO]⁺/CH₄ and [Fe(O)OH]⁺/CH₄ systems, which afford [FeOH]⁺ as the main product, the generation of Fe⁺ dominates the reaction of [FeO₂]⁺ with CH₄. Theoretical calculations suggest a novel "oxygen rebound" pathway for the liberation of methanediol. In particular, the inevitable valence increase of Fe prior to C-H activation is similar to the cytochrome P-450 mediated processes. To our best knowledge, this study provides the first example of methane activation by the high-valent Fe(V)-oxo species in the gas phase, which may thus bridge the gas-phase model and the condensed-phase biosystems.

Single atom alloy clusters Agn-1X- (X = Cu, Au; n = 7-20) reacting with O2: Symmetry-adapted orbital model

Single atom alloy AgCu catalysts have attracted great attention, since doping the single Cu atom introduces narrow free-atom-like Cu 3d states in the electronic structure. These peculiar electronic states can reduce the activation energies in some reactions and offer valuable guidelines for improving catalytic performance. However, the geometric tuning effect of single Cu atoms in Ag catalysts and the structure-activity relationship of AgCu catalysts remain unclear. Here, we prepared well-resolved pristine Ag_n ^- as well as single atom alloy Ag_n-1Cu^- and Ag_n-1Au^- (n = 7-20) clusters and investigated their reactivity with O₂. We found that replacing an Ag atom in Ag_n ^- (n = 15-18) with a Cu atom significantly increases the reactivity with O₂, while replacement of an Ag with an Au atom has negligible effects. The adsorption of O₂ on Ag_n ^- or Ag_n-1Cu^- clusters follows the single electron transfer mechanism, in which the cluster activity is dependent on two descriptors, the energy level of α-HOMO (strong correlation) and the α-HOMO-LUMO gap (weak correlation). Our calculation demonstrated that the cluster arrangements caused by single Cu atom alloying would affect the above activity descriptors and, therefore, regulates clusters' chemical activity. In addition, the observed reactivity of clusters in the representative sizes with n = 17-19 can also be interpreted using the symmetry-adapted orbital model. Our work provides meaningful information to understand the chemical activities of related single-atom-alloy catalysts.

Platonic and Archimedean solids in discrete metal-containing clusters

Metal-containing clusters have attracted increasing attention over the past 2-3 decades. This intense interest can be attributed to the fact that these discrete metal aggregates, whose atomically precise structures are resolved by single-crystal X-ray diffraction (SCXRD), often possess intriguing geometrical features (high symmetry, aesthetically pleasing shapes and architectures) and fascinating physical properties, providing invaluable opportunities for the intersection of different disciplines including chemistry, physics, mathematical geometry and materials science. In this review, we attempt to reinterpret and connect these fascinating clusters from the perspective of Platonic and Archimedean solid characteristics, focusing on highly symmetrical and complex metal-containing (metal = Al, Ti, V, Mo, W, U, Mn, Fe, Co, Ni, Pd, Pt, Cu, Ag, Au, lanthanoids (Ln), and actinoids) high-nuclearity clusters, including metal-oxo/hydroxide/chalcogenide clusters and metal clusters (with metal-metal binding) protected by surface organic ligands, such as thiolate, phosphine, alkynyl, carbonyl and nitrogen/oxygen donor ligands. Furthermore, we present the symmetrical beauty of metal cluster structures and the geometrical similarity of different types of clusters and provide a large number of examples to show how to accurately describe the metal clusters from the perspective of highly symmetrical polyhedra. Finally, knowledge and further insights into the design and synthesis of unknown metal clusters are put forward by summarizing these "star" molecules.