Theory and Calculation of the Phosphorescence Phenomenon

Design Rule of Tetradentate Ligand-Based Pt(II) Complex for Efficient Singlet Exciton Harvesting in Fluorescent Organic Light-Emitting Diodes

Controlling intermolecular interactions, such as triplet-triplet annihilation (TTA) and triplet-polaron annihilation (TPA), is crucial for achieving high quantum efficiency in organic light-emitting diodes (OLEDs) by suppressing exciton loss. This study investigates the molecular design of tetradentate Pt(II) complexes used for singlet exciton harvesting in fluorescent OLEDs to elucidate the relationship between the chemical structure of the ligands and exciton quenching mechanisms. It was discovered that the bulkiness of substituents is pivotal for maximizing quantum efficiency in these devices. An exciton dynamics study conducted during device operation quantitatively analyzed the contribution of substituents to the OLED operation mechanism, demonstrating that complexes with bulky 2,6-diisopropylphenyl and tert-butyl substituents enhance singlet exciton harvesting by suppressing TTA and TPA, thereby facilitating Förster energy transfer.

Diverse Behaviors of N2 on Mo Centers Bearing POCOP-Pincer Ligands and the Role of π-Electron Configuration in Regulating the Pathway of N2 Activation

Activation of N2 through transition-metal complexes has emerged as a powerful strategy for N2 fixation under mild conditions. Dissociative route and associative route are considered as two major routes for N2 transformation on transition-metal complexes. Homolysis of N2 between two metal fragments is the crucial step of the dissociative route and has been proven to be an efficient approach to the terminal metal nitride, which is the key intermediate for both routes. Hence, the conditions for N2 cleavage have attracted much interest and discussion. Herein, we investigated the reactivity of N2 when coordinated on Mo centers bearing POCOP-pincer ligands and isolated and characterized many novel N2-related intermediates such as [(POCOPCy)MoI]2(μ-N2) (2Cy), (POCOPCy)Mo(N)(μ-N)MoI (5Cy), {[(POCOPCy)Mo(N2)2]2(μ-N2)}[Na(crypt-222)] (6Cy-crypt), and [(POCOPCy)Mo(N2)2(μ-N2)Mo(N)]Na (8Cy). The influences of the oxidation state of the metal centers, π electrons, reaction conditions, etc., on the N2-reactivity were also studied both experimentally and theoretically. Accordingly, some fundamental understanding of the regulation of N2 activation pathways was proposed: an N2-bridged Mo dimer without ligand trans to the bridging N2 is a preferred structure for N2 cleavage; having adequate electrons to be transferred into the σ-σ*-σ related orbital in the {MoNNMo} manifold is the key; and heating or electron excitation is advantageous to the dissociative route.

Spin-Orbit Coupling and Admixture Coefficients in SA-CASSCF and MS-CASPT2, and Triplet Excitation Yield Simulated via Trajectory Surface Hopping and Calibrated SA-CASSCF in 1,2-Dioxetane Derivatives

The energy gaps, spin-orbit coupling (SOC), and admixture coefficients over a series of the configurations are evaluated by the SA-CASSCF/6-31G, SA-CASSCF/6-31G*, SA-CASSCF/ANO-RCC-VDZP, and MS-CASPT2/ANO-RCC-VDZP to reveal the extent of the inaccuracy of the SA-CASSCF. By comparing the mean absolute errors for the energy gaps and the admixture coefficient magnitudes (ACMs) measured between the SA-CASSCF/6-31G, SA-CASSCF/6-31G*, or SA-CASSCF/ANO-RCC-VDZP and the MS-CASPT2/ANO-RCC-VDZP, the SA-CASSCF/6-31G is selected as the electronic structure method in the nonadiabatic molecular dynamics simulation. The major components of the ACMs of the SA-CASSCF/6-31G and MS-CASPT2/ANO-RCC-VDZP are identified and compared; we find that the ACMs are underestimated by the SA-CASSCF/6-31G, which is verified by the reasonable triplet quantum yield simulated by the trajectory surface hopping and the calibrated SA-CASSCF/6-31G. The magnitude of the singlet-triplet mixing positively correlates to the hopping probability between the mixed singlet and triplet states, which is confirmed by the computed S-T transition probability.

Enhancing the Optically Detected Magnetic Resonance Signal of Organic Molecular Qubits

In quantum information science and sensing, electron spins are often purified into a specific polarization through an optical-spin interface, a process known as optically detected magnetic resonance (ODMR). Diamond-NV centers and transition metals are both excellent platforms for these so-called color centers, while metal-free molecular analogues are also gaining popularity for their extended polarization lifetimes, milder environmental impacts, and reduced costs. In our earlier attempt at designing such organic high-spin π-diradicals, we proposed to spin-polarize by shelving triplet M S = ±1 populations as singlets. This was recently verified by experiments albeit with low ODMR contrasts of <1% at temperatures above 5 K. In this work, we propose to improve the ODMR signal by moving singlet populations back into the triplet M S = 0 sublevel, designing a true carbon-based molecular analogue to the NV center. Our proposal is based upon transition-orbital and group-theoretical analyses of beyond-nearest-neighbor spin-orbit couplings, which are further confirmed by ab initio calculations of a realistic trityl-based radical dimer. Microkinetic analyses point toward high ODMR contrasts of around 30% under experimentally feasible conditions, a stark improvement from previous works. Finally, in our quest toward ground-state optically addressable molecular spin qubits, we exemplify how our symmetry-based design avoids Zeeman-induced singlet-triplet mixings, setting the scene for realizing electron spin qubit gates.

Organic Circularly Polarized Room-Temperature Phosphorescence: Strategies, Applications and Challenges

Organic circularly polarized luminescence (CPL) plays crucial roles in chemistry and biology for the potential in chiral recognition, asymmetric catalysis, 3D displays, and biological probes. The long-lived luminescence, large Stokes shift, and unique chiroptical properties make organic circularly polarized room-temperature phosphorescence (CPP) a new research hotspot in recent years. Nevertheless, achieving high-performance organic CPP is still challenging due to the sensitivity and complexity of integrating triplet excitons and polarization within organic materials. This review summarizes the latest advances in organic CPP, ranging from design strategies and photophysical properties to underlying luminescence mechanisms and potential applications. Specifically, the design strategies for generating CPP are systemically categorized and discussed according to the interactions between chiral units and chromophores. The applications of organic CPP in organic light-emitting diodes, sensing, chiral recognition, afterglow displays, and information encryption are also illustrated. In addition, we present the current challenges and perspectives on developing organic CPP. We expect this review to provide some instructive design principles to fabricate high-performance organic CPP materials, offering an in-depth understanding of the luminescence mechanism and paving the way toward diverse practical applications.

A computational study on the effect of structural isomerism on the excited state lifetime and redox energetics of archetype iridium photoredox catalyst platforms [Ir(ppy)2(bpy)]+ and Ir(ppy)3

This study investigates the impact of structural isomerism on the excited state lifetime and redox energetics of heteroleptic [Ir(ppy)2(bpy)]+ and homoleptic Ir(ppy)3 photoredox catalysts using ground-state and time-dependent density functional theory methods. While the ground- and excited-state reduction potentials differ only slightly among the isomers of these complexes, our findings reveal significant variations in the radiative and non-radiative decay rates of the reactivity-controlling triplet 3MLCT states of these closely related species. The observed differences in radiative decay rates could be traced back to variations in the transition dipole moment, vertical energy gaps, and spin-orbit coupling of the isomers. In [Ir(ppy)2(bpy)]+, transition dipole moment differences play a significant role in controlling the relative lifetime of the triplet states, which we rationalized by a vectorial analysis of permanent dipole moments of the ground and excited states. Regarding the two isomers of Ir(ppy)3, changes in radiative decay rates were primarily attributed to variations in vertical energy gaps and intensity borrowing from other singlet-singlet transitions driven by spin-orbit coupling. Non-radiative decay variations were assessed in terms of differences in reorganization energies, adiabatic energy gap, and spin-orbit coupling. For both complexes, reorganization energies associated with low-energy molecular vibrations and metal-ligand bond length changes following the de-excitation process were major contributors. These insights provide a deeper understanding of how molecular design can be leveraged to optimize the performance of iridium-based photoredox catalysts, potentially guiding the development of more efficient catalytic systems for future applications.

Understanding 2-(Nitromethylene)hexahydropyrimidin-5-ol Reaction Processes and NMR Spectroscopy: A Theoretical and Experimental Investigation

Ketene dithioacetals have significant applications in various fields, including natural products, pharmaceuticals, agrochemicals, and corrosion inhibitors. These compounds are highly valued for their reactivity and ability to participate in a wide range of organic syntheses. In this context, the reaction between 1,3-diaminopropan-2-ol and 1,1-bismethylsulfanyl-2-nitroethylene has been studied experimentally and theoretically by using density functional theory (DFT) calculations. A theoretical mechanism of formation of two possible products, 2-(nitromethylene)hexahydropyrimidin-5-ol (with a six-membered heterocycle) and (2-(nitromethylene)oxazolidin-5-yl)methanamine (with a five-membered heterocycle), is for the first time predicted. The present DFT results indicate that both mechanisms are exothermic, with energy barriers approximately 20 kcal/mol higher than those of the reactants. Among the two, the formation of 2-(nitromethylene)hexahydropyrimidin-5-ol is energetically more favorable. This compound was synthesized and analyzed by different experimental techniques (IR, nuclear magnetic resonance (NMR), and high-resolution mass spectrometry). The 1H and 13C NMR chemical shifts of 2-(nitromethylene)hexahydropyrimidin-5-ol were calculated using the GIAO/B3LYP, showing good agreement with our experimental observations. These findings highlight an important match between experimental results and theoretical predictions, offering deeper insights into ketene dithioacetal reactions. The new data and contributions are expected to generate significant interest in future applications.

Aurophilic interaction-based aggregation of gem-digold(I) aryls towards high spin-orbit coupling and strong phosphorescence

Luminescent gold(I) compounds have attracted intensive attention due to anticipated strong spin-orbit coupling (SOC) resulting from heavy atom effect of gold atoms. However, some mononuclear gold(I) compounds are barely satisfactory. Here, we unveil that low participation of gold in transition-related orbitals, caused by 6s-π symmetry mismatch, is the cause of low SOCs in monogold(I) compounds. To address this issue, we have developed a series of acceptor-donor organogold(I) luminescent compounds by incorporating a gem-digold moiety with various aryl donors. These compounds demonstrate wide-range tunable emission colors and impressive photoluminescence quantum yields of up to 78%, among the highest reported for polynuclear gold(I) compounds. We further reveal that the integration of the gem-digold moiety allows better interaction of gold 6s orbitals with aryl π orbitals, facilitates aryl-to-gold electron transfer, and reduces Pauli repulsion between digold units, finally engendering the formation of aurophilic interaction-based aggregates. Moreover, the strength of such intermolecular aurophilic interaction can be systematically regulated by the electron donor nature of aryl ligands. The formation of those aurophilic aggregates significantly enhances SOC from <10 to 239 cm-1 and mainly accounts for high-efficiency phosphorescent emission in solid state.

Wavelength-dependent intersystem crossing dynamics of phenolic carbonyls in wildfire emissions

Quantum chemical calculations were employed to construct Jablonski diagrams for a series of phenolic carbonyls, including vanillin, iso-vanillin, 4-hydroxybenzaldehyde, syringaldehyde, and coniferyl aldehyde. These molecules can enter the Earth's atmosphere from forest fire emissions and participate in photochemical reactions within the atmospheric condensed phase, including cloud and fog droplets and aqueous aerosol particles. This photochemistry alters the composition of light-absorbing organic content, or brown carbon, in droplets and particles through the formation and destruction of key chromophores. This study demonstrates that following photon absorption, phenolic carbonyls efficiently transition to triplet states via intersystem crossings (ISC), with rate coefficients ranging from 109 to 1010 s-1. Despite the presence of multiple potential ISC pathways due to several lower-lying triplet states, a single channel is found to dominate for each system. We further investigated the dependence of the ISC rate constant (kISC) on the vibrational excitation energy of the first accessible (ππ*) singlet excited state (S1 or S2, depending on the molecule), and compared it with the measured wavelength dependence of the photochemical quantum yield (Φloss). Although our model only accounts for intramolecular nonradiative electronic transitions, it successfully captures the overall trends. All studied molecules, except coniferyl aldehyde, exhibit saturation in the dependence of both kISC and Φloss on the wavelength (or vibrational excitation energy). In contrast, coniferyl aldehyde displays a single maximum, followed by a monotonic decrease as the excitation energy increases (wavelength decreases). This distinct behavior in coniferyl aldehyde may be attributed to the presence of a double-bonded substituent, which enhances π-electron conjugation, and reduces the exchange energy and thus the adiabatic energy gap between the S1(ππ*) state and the target triplet state. For small energy gaps, the classical acceptor modes of the ISC process are less effective, leading to a low effective density of final states. Larger gaps enhance the effective density of states, making the wavelength dependence of the ISC more pronounced. Our calculations show that while all the studied phenolic carbonyls have similar acceptor modes, coniferyl aldehyde has a substantially smaller adiabatic gap (1700 cm-1) than the other molecules. The magnitude of the adiabatic energy gap is identified as the primary factor determining the energy/wavelength dependence of the ISC rate and thus Φloss.

Construction of starch-based room temperature phosphorescence materials with wide color-tunable long afterglow and even persistent near-infrared luminescence via Förster resonance energy transfer

Environmentally friendly natural polymer-based room temperature phosphorescence (RTP) materials exhibit promising applications in anti-counterfeiting and information encryption. However, the construction of natural polymer-based RTP materials with multicolor long afterglow and even persistent near-infrared (NIR) luminescence remains a tough challenge. Here, starch (S)-based ultralong RTP materials with wide color-tunability, persistent NIR luminescence are conveniently prepared through Förster resonance energy transfer (FRET) strategies. The binary doping system S-4-carboxyphenylboric acid with an ultralong phosphorescence lifetime of up to 449 ms is used as energy donor, and commercial dyes fluorescein, rhodamine 6G and lissamine rhodamine B (LRB) are selected as energy acceptors. By adjusting the weight ratio of energy donor and acceptor, tunable multicolor long afterglow from blue to yellow-green, purple, red and even nearly white (0.32, 0.33) can be successfully achieved through the triplet-to-singlet FRET process. The quaternary doping system displays persistent NIR luminescence band from 650 to 800 nm along with the longest phosphorescence lifetime of up to 131 ms via the stepwise FRET process using LRB as the intermediate energy acceptor and NIR dye Nile blue A as the energy acceptor. Satisfactorily, the prepared S-based RTP materials with wide-range color-tunable long afterglow demonstrate potential applications in multimode information encryption and anti-counterfeiting.

Stable, Full-Color, Long-Lasting Aqueous Room-Temperature Phosphorescent Materials

Ultralong room-temperature phosphorescent (URTP) materials have garnered significant attention in anti-counterfeiting, optoelectronic displays, and bio-imaging due to their unique optical properties. However, most URTP materials exhibit weak emission or are quenched in aqueous solutions. This study proposes a simple and effective strategy for preparing full-color aqueous URTP materials using a one-step microwave method. Guest molecules are embedded in a rigid cyanuric acid (CA) matrix formed from urea. By enhancing the conjugation of the guest molecules, a series of full-color URTP materials is successfully produced. These materials exhibit excellent phosphorescent properties, with a maximum phosphorescent lifetime of 7.96 s. Protected by the CA matrix, they retain phosphorescence even in aqueous environments, displaying an afterglow visible to the naked eye for over 30 s in water. Additionally, under low water content conditions, the materials exhibit exceptional water-enhanced properties, achieving a phosphorescence quantum yield (PhQY) of 40.4%. Importantly, these aqueous URTP materials can be prepared in just 5 min, showcasing great potential in information encryption and afterglow displays.

Heavy atom effects on synthetic pyranoanthocyanin analogues

Pyranoflavylium cations are synthetic analogues of pyranoanthocyanins, the much more color-stable compounds that are formed spontaneously from grape anthocyanins during the maturation of red wines. In the present work, our studies of the photophysical properties of pyranoanthocyanin analogues are extended to include nine pyranoflavylium cations substituted with one or two bromo and/or iodo heavy atoms. The room temperature fluorescence, 77 K fluorescence and phosphorescence, triplet formation in solution, and sensitized singlet oxygen formation, with excited state acidity suppressed by the addition of trifluoroacetic acid, are compared to those of similar pyranoflavylium cations that do not contain a heavy atom. Heavy atom effects on the photophysics of the S1 state of pyranoflavylium cations are found to be relatively small, which is attributed to the nodal properties of the orbitals involved, which prevent effective mixing of the spin-orbit coupling on the heavy atoms into the excited singlet state, S1, of the pyranoflavylium chromophore. Heavy atom effects on the phosphorescence of these heavy atom-substituted pyranoflavylium cations at 77 K are somewhat larger, consistent with a spin-orbit coupling-induced increase in the radiative rate constant for phosphorescence, as are the triplet-sensitized singlet oxygen formation quantum yields in fluid solution.

Tunable Nano-Supramolecules Based on Cucurbiturils for Near-Infrared Phosphorescence Imaging

Nano-supramolecules based on artificial macrocycles can not only regulate assembly morphology but also boost phosphorescence resonance energy transfer (PRET). Herein, a water-soluble phosphorescence supramolecule was constructed from the hyaluronic acid-modified bromophenylpyridinium (HAPY), cucurbit[n]uril (CB[n], n = 7/8), and energy acceptor phenyl-bridged phenothiazine derivatives, displaying efficient PRET and achieving near-infrared (NIR) phosphorescence by macrocyclic CB[n] and the assembly confinements. As compared with weak phosphorescent nanofibers of HAPY/CB[7], the spherical nanoparticles of HAPY/CB[8] not only gave strong green phosphorescence with extended lifetime to 1.27 ms but also could act as the energy donor and confine cationic phenothiazine in the secondary assemblies, leading to highly efficient PRET efficiency (87.27%) from the phosphors to triplet acceptors, realizing phosphorescence emission at 750 nm and an ultralarge Stokes shift of 440 nm. Ultimately, the nanoassembly achieved by the multiscale confinements boosting PRET was successfully applied in targeted cancer cell imaging, providing new insight for fabricating NIR phosphorescence materials.

Synchronously Improved Multiple Afterglow and Phosphorescence Efficiencies in 0D Hybrid Zinc Halides With Ultrahigh Anti-Water Stabilities

Zero-dimensional (0D) hybrid metal halides have been emerged as room-temperature phosphorescence (RTP) materials, but synchronous optimization of multiple phosphorescence performance in one structural platform remains less resolved, and stable RTP activity in aqueous medium is also unrealized due to serious instability toward water and oxygen. Herein, we demonstrated a photophysical tuning strategy in a new 0D hybrid zinc halide family of (BTPP)2ZnX4 (BTPP=benzyltriphenylphosphonium, X=Cl and Br). Infrequently, the delicate combination of organic and inorganic species enables this family to display multiple ultralong green afterglow and efficient self-trapped exciton (STE) associated cyan phosphorescence. Compared with inert luminescence of [BTPP]+ cation, incorporation of anionic [ZnX4]2- effectively enhance the spin-orbit coupling effect, which significantly boosts the photoluminescence quantum yield (PLQY) up to 30.66 % and 54.62 % for afterglow and phosphorescence, respectively. Synchronously, the corresponding luminescence lifetime extend to 143.94 ms and 0.308 μs surpassing the indiscernible phosphorescence of [BTPP]X salt. More importantly, this halide family presents robust RTP emission with nearly unattenuated PLQY in water and harsh condition (acid and basic aqueous solution) over half a year. The highly efficient integrated afterglow and STE phosphorescence as well as ultrahigh aqueous state RTP realize multiple anti-counterfeiting applications in wide chemical environments.

Temperature-Adaptive Organic Scintillators for X-ray Radiography

Organic phosphorescence or thermally activated delayed fluorescence (TADF) scintillators, while effective in utilizing triplet excitons, are sensitive to temperature changes, which can impact radioluminescence performance. In this study, we have developed a type of temperature-adaptive organic scintillator with phosphorescence and TADF dual emission. These scintillators can automatically switch modes with temperature changes, enabling efficient radioluminescence from 77 to 400 K. The highest photoluminescence quantum yield and light yield are 83.2% and 78,229 ± 562 photons MeV-1 excited by a UV lamp and X-ray, respectively. Their detection limit is 51 and 23 nGy·s-1 at room temperature and 77 K, respectively, which is lower than the standard dosage of 5.5 μGy s-1 for X-ray diagnostics. Moreover, given the high spatial resolution of 21.7 l p mm-1, we demonstrate their potential application in multiple-temperature X-ray radiography, offering promising new possibilities. This work opens a new route for developing organic scintillators to adapt to ambient temperature change and paves the way for their use in various temperature-sensitive radiography applications.

Real-time spectroscopic tracking of efficient intersystem crossing triggered by the heavy-atom effect in di-heteroatomic organic phosphorescent molecules

The development of efficient and long-lived halogen-free organic phosphorescent molecules remains a challenge. For the single-heteroatomic 9,10-dihydroacridine (AcH2), the evolution of singlet and triplet excited state absorption signals reveals an intersystem crossing (ISC) lifetime of 8.2 ns and a triplet state lifetime of 0.52 µs. In contrast, the ISC lifetimes of di-heteroatomic phenoxazine (PXZ) and phenothiazine (PTZ) are significantly accelerated to 1.7 ns and 1.1 ns, respectively, while the triplet state lifetimes are extended to 0.72 µs and 4 µs. These results confirm that the introduction of di-heteroatomic synergistic effects enhances ISC efficiency while simultaneously prolonging the triplet state lifetimes. Notably, these two critical factors are further improved in PTZ due to the heavy-atom effect of sulfur atom. The work emphasizes the di-heteroatomic synergistic effect, particularly the role of heteroatoms with large atomic numbers, which is crucial for the design of halogen-free organic phosphorescent materials.

Copper-Iodide Hybrid Clusters with Partial Distortion Enable High-Performance Full-Visible-Spectrum White-Light-Emitting Diodes

Phosphor-converted white-light-emitting diodes (pc-WLEDs) have become increasingly prevalent artificial light sources. Currently, multicomponent phosphors are commonly used for pc-WLEDs, but they often suffer from issues of undesirable reabsorption and unstable emission colors. The potential alternative for pc-WLEDs is a single-component white phosphor that covers the broad visible spectrum with desirable low thermal quenching and efficient luminescence, which is still scarce. To address this challenge, we design a unique single-component white phosphor based on Cu4I4(4-(tert-butyl)-2-(diphenylphosphaneyl)pyridine)2 (Cu4I4(NP-tBu)2) hybrid clusters, which exhibits ultrabroad dual emission from 400 to 800 nm and a high photoluminescence quantum yield of 97% under 320 nm light excitation. Based on time-resolved fluorescence spectroscopy and theoretical model analysis of our Cu4I4 series clusters, we hypothesize that the dual emission comes from the coexistence of two triplet states caused by partial cluster distortion under light excitation. The Cu4I4(NP-tBu)2 cluster's high structural stability also endows consistent spectral performance and low thermal quenching up to 240 °C. Thus, the fabricated pc-WLED using Cu4I4(NP-tBu)2 white phosphor exhibits a maximum efficiency of 63.4 lm/W and maintains a high color rendering index of ∼88 during 1000 h of continuous operation. Our results highlight a new strategy of low-cost and high-performance copper-iodide cluster-based single-component white phosphors for high-quality pc-WLEDs.

Room temperature phosphorescent wood hydrogel

Room temperature phosphorescent (RTP) hydrogels exhibit great potential but show poor mechanical performance (Tensile strengthen <1 MPa) and non-tunable RTP performance, hindering their practical applications. Here, we develop wood hydrogel (W-hydrogel) by the in situ polymerization of acrylamide in the presence of delignified wood. As a result of the molecular interactions between the components of delignified wood and polyacrylamide, the W-hydrogel exhibit a tensile strengthen of 38.4 MPa and green RTP emission with a lifetime of 32.5 ms. Moreover, the tensile strength and RTP lifetime are increased to 153.8 MPa and 69.7 ms, upon treating W-hydrogel with ethanol. Significantly, the mechanical and RTP performance of W-hydrogel is switched by alternating "ethanol and water" treatments. Additionally, W-hydrogel is used as energy donor in order to produce red afterglow emission using RhB via an energy transfer process. Taking advantage of these properties, W-hydrogel is processed into multiple hydrogel-based luminescent materials.

Positively Photo-Responsive Adsorption Over Binary Copper Porphyrin Framework and Graphene Film Sorbents

Photo-responsive adsorption has emerged as a vibrant area because it provides a promising route to reduce the energy consumption of the traditional adsorption separation. However, the current methodology to fabricate photo-responsive sorbents is still subject to the photo-deforming molecular units. In this study, a new initiative of photo-dissociated electron-hole pairs is proposed to generate amazing adsorption activity, and prove its feasibility. Employing CuPP [PP = 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin] framework nanosheets compounded with graphene, binary film (BF) sorbents are successfully fabricated. The paradigmatic BF nanostructure brings about efficiently photo-excited electron-hole pairs with durable enough lifetime to meet the needs of microscopic adsorption equilibrium, which ultimately alters the electron density distribution of adsorption surface, and thus markedly modulates the adsorption activity. Therefore, an amazing photo-enhanced adsorption capability for the index gas CO can be gotten. Once exposed to the visible-light at 420 nm, the CO adsorption capacity (0 °C, 1 bar) is risen from 0.23 mmol g-1 in the darkness to 1.66 mmol g-1, changed by + 622%. This is essentially different from majority of current photo-responsive sorbents based on photo-deforming molecular units, of which adsorption capability is only decreased with photo-induction, and the maximum rate of change reported is just -54%.

Evolution of Organic Light Emitting Diode (OLED) Materials and their Impact on Display Technology

Organic light-emitting diodes (OLEDs) have revolutionized display and lighting technologies, offering unparalleled design, device flexibility, vibrant colors, and energy efficiency. In this comprehensive review we elucidate the evolution of OLED technology, summarizing its progression from the fundamental principles of fluorescence (1st generation) and phosphorescence (2nd generation) to the emergence of thermally activated delayed fluorescence (TADF) (3rd generation), hyper fluorescence (4th generation), and exceptional future generation OLEDs. This review highlights the development and challenges of early-generation OLEDs, scrutinizing their mechanisms, emitters, and limitations. As TADF OLEDs mark a significant paradigm shift, we explore their enhanced efficiency and potential for cost-effective production without the involvement of toxic heavy metals. Building upon this foundation this review explores the burgeoning concepts of hyper-fluorescence and future-generation OLEDs, poised to push the boundaries of color purity, efficiency, and operational stability. This consolidated comprehensive exploration described herein may provide enormous information for designing future-generation OLED materials for sustainable development.

The formation of exciplex and triplet-triplet transfer in organic room temperature phosphorescent guest-host materials

Organic materials typically do not phosphoresce at room temperature because both intersystem crossing (ISC) and phosphorescence back to the electronic ground state are slow, compared to the nonradiative decay processes. A group of organic guest-host molecules breaks this rule. Their phosphorescence at room temperature can last seconds with a quantum efficiency of over 10%. This extraordinary phenomenon is investigated with comprehensive static and transient spectroscopic techniques. Time-resolved vibrational and fluorescence spectral results suggest that a singlet guest-host exciplex quickly forms after excitation. The formation of exciplex reduces the singlet-triplet energy gap and helps facilitate charge separation that can further diffuse into the host matrix. The heavy atoms (P or As) of the host molecule can also help enhance the spin orbital coupling of the guest molecule. Both boost the rate of ISC. After the singlet exciplex transforms into the triplet exciplex through the ISC process, UV-visible transient absorption spectroscopic measurements support that the triplet exciplex quickly transforms into the guest molecule triplet state that is at a lower energy level, thereby reducing the reverse ISC-induced triplet population loss. Finally, the long-lasting separated charges that diffused into the host matrix can diffuse back to the guest hole to form new triplets, and the dilution effect of the host molecules can effectively reduce the triplet quenching. All these factors contribute to the dramatic enhancement of phosphorescence at room temperature.

Light/X-ray/ultrasound activated delayed photon emission of organic molecular probes for optical imaging: mechanisms, design strategies, and biomedical applications

Conventional optical imaging, particularly fluorescence imaging, often encounters significant background noise due to tissue autofluorescence under real-time light excitation. To address this issue, a novel optical imaging strategy that captures optical signals after light excitation has been developed. This approach relies on molecular probes designed to store photoenergy and release it gradually as photons, resulting in delayed photon emission that minimizes background noise during signal acquisition. These molecular probes undergo various photophysical processes to facilitate delayed photon emission, including (1) charge separation and recombination, (2) generation, stabilization, and conversion of the triplet excitons, and (3) generation and decomposition of chemical traps. Another challenge in optical imaging is the limited tissue penetration depth of light, which severely restricts the efficiency of energy delivery, leading to a reduced penetration depth for delayed photon emission. In contrast, X-ray and ultrasound serve as deep-tissue energy sources that facilitate the conversion of high-energy photons or mechanical waves into the potential energy of excitons or the chemical energy of intermediates. This review highlights recent advancements in organic molecular probes designed for delayed photon emission using various energy sources. We discuss distinct mechanisms, and molecular design strategies, and offer insights into the future development of organic molecular probes for enhanced delayed photon emission.

Reactive oxygen species-mediated organic long-persistent luminophores light up biomedicine: from two-component separated nano-systems to integrated uni-luminophores

Organic luminophores have been widely utilized in cells and in vivo fluorescence imaging but face extreme challenges, including a low signal-to-noise ratio (SNR) and even false signals, due to non-negligible background signals derived from real-time excitation lasers. To overcome these challenges, in the last decade, functionalized organic long-persistent luminophores have gained much attention. Such luminophores could not only overcome the biological toxicity of inorganic long-persistent luminescent materials (metabolic toxicity and leakage risk of inorganic heavy metals), but also continue to emit long-persistent luminescence after removing the excitation source, thus effectively improving imaging quality. More importantly, organic long-persistent luminophores have good structure tailorability for the construction of activable probes, which is favorable for biosensing. Recently, the development of reactive oxygen species (ROS)-mediated long-persistent (ROSLP) luminophores (especially organic small-molecule ROSLP luminophores) is still in the rising stage. Notably, ROSLP luminophores for in vivo imaging have experienced from two-component separated nano-systems to integrated uni-luminophores, which obtained gradually better designability and biocompatibility. In this review, we summarize the progress and challenges of organic long-persistent luminophores, focusing on their development history, long-persistent luminescence working mechanisms, and biomedical applications. We hope that these insights will help scientists further develop functionalized organic long-persistent luminophores for the biomedical field.

Facile Synthesis and Multiple Application of Ultralong-Afterglow Room Temperature Phosphorescence Aggregate Carbon Dots from Simple Raw Materials

Owing to the ultralong afterglow, room temperature decay phosphorescence nanomaterials have aroused enough attention. In the work, by simple one-pot solid-state thermal decomposition reaction, aggregate carbon dots (CDs) was prepared from trimesic and boric acid. Based on the intermolecular hydrogen bonds and intramolecular π-π stacking weak interaction from precursors, CDs was encapsulated in boron oxide matrix and formed aggregation. The aggregate state of CDs facilitated the triplet excited states (Tn), which could induce the room temperature decay phosphorescence properties. By careful investigation, under different excitation wavelengths at 254 and 365 nm, the aggregate CDs showed > 15 s and > 3 s room temperature phosphorescence emission in the naked eye, which was associated with 1516.12 ms and 718.62 ms lifetime respectively. And the aggregate CDs exhibited widespread application in encoding encryption, optical anti-counterfeiting and fingerprint identification etc. The interesting aggregate CDs revealed unexpected ultralong-afterglow room temperature decay phosphorescence properties and the work opened a window for constructing ultralong-afterglow room temperature decay phosphorescence aggregate CDs nanomaterials.

Achieving Efficient X-ray Scintillation of Purely Organic Phosphorescent Materials by Chromophore Confinement

Scintillators have attracted significant attention due to their wide-ranging applications in both industrial and medical fields. However, one of the ongoing challenges is the efficient utilization of triplet excitons to achieve high radioluminescence efficiency. Here, a series of purely organic phosphors is presented for X-ray scintillation, employing a combined rigid and flexible host-guest doping strategy. The doped crystals exhibit a remarkable maximum phosphorescence efficiency of 99.4% under UV excitation. Furthermore, upon X-ray irradiation, the radioluminescence intensities of the doped phosphors are markedly higher compared to their single-component crystal counterparts. Through systematic investigations, it is demonstrated the crucial role of confining isolated chromophores in enhancing scintillation efficiency. Additionally, a transparent scintillator screen fabricated with the doped phosphor exhibits excellent X-ray imaging performance, achieving a high spatial resolution of 18.0 lp mm-1. This work not only offers valuable insights into suppressing non-radiative transitions of triplet excitons during scintillation but also opens a new avenue for designing highly efficient purely organic phosphorescent scintillators.

Unearthing the Real-Time Excited State Dynamics from Antenna to Rare Earth Ions Using Ultrafast Transient Absorption

The conventional energy transfer pathway in organic lanthanide complexes is purported to be from the excited singlet state of the chromophore to the triplet state and subsequently directly to the emitting state of the trivalent lanthanide ion. In this work, we found that the energy transfer occurs from the triplet state to the nearest energy level, instead of directly to the emitting state of the lanthanide ion. The triplet decay rate for different lanthanide ions follows an energy gap law from the triplet level to the receiving level of the lanthanide ion. Three different categories of complexes were synthesized and inspected using different techniques, demonstrating the universality of our findings. This work renews the insights to conventional findings, highlighting the importance of the energy gap between the triplet state and the nearest lanthanide energy level in optimization of light harvesting. The rationale of ligand design of chromophores should be reconsidered, leading to various applications of lanthanide complexes with enhanced quantum yield and brightness.

The effect of heavy atoms on the deactivation of electronic excited states of dye molecules near the surface of metal nanoparticles

The influence of a heavy atom and the plasmon field on the efficiency of populating the lowest triplet state (T1) and on the phosphorescence intensity has been studied for fluorescein, 2Br-fluorescein, eosin and erythrosine, which have an increasing number of substituted heavy atoms. We show that the heavy atoms affect not only the rate constant of intersystem crossing (kISC) but also the rate constant of internal conversion (kIC). The calculations show that the C-H bonds in the meso position are the primary acceptors of the excitation energy of the lowest excited electronic singlet state (S1). Substitution of the meso hydrogen atoms with I or Br leads to a smaller kIC rate constant of 1 × 108 s-1 for fluorescein to 8 × 106 s-1 for eosin. Substitution with heavy atoms also leads to a larger ISC rate constant (kISC) between the T2 and S1 states because the spin-orbit coupling matrix element 〈S1|HSO|T2〉 increases by two orders of magnitude from 0.36 cm-1 for fluorescein to 35.0 cm-1 for erythrosine. The phosphorescence rate constant increases by three orders of magnitude from 4.8 × 10 s-1 for fluorescein to 3.3 × 104 s-1 for erythrosine, which is supported by experimental data. The plasmon effect increases the intensity of the xanthene dye emissions. The intensity and the quantum yield of fluorescence increase in the series fluorescein < 2Br-fluorescein < eosin < erythrosine. The intensity of the delayed fluorescence and phosphorescence grows in the same way. The enhancement factor of the phosphorescence intensity increases from 1.8 to 5.6 in the series from fluorescein to erythrosine. The differences in the plasmon effect originate from intensity borrowing to the radiative triplet-singlet transition (T1 → S0) from the singlet-singlet transitions (Sn → S0), which is more efficient when molecules have heavy atoms in the meso position.

A Tetracarbene Iron(II) Complex with a Long-lived Triplet Metal-to-Ligand Charge Transfer State due to a Triplet-Triplet Barrier

Mixed N-heterocyclic carbene (NHC) / pyridyl iron(II) complexes have attracted a great deal of attention recently because of their potential as photocatalysts and light sensitizers made from Earth-abundant elements. The most decisive challenge for their successful implementation is the lifetime of the lowest triplet metal-to-ligand charge transfer state (3MLCT), which typically decays via a triplet metal-centered (3MC) state back to the ground state. We reveal by variable-temperature ultrafast transient absorption spectroscopy that the tripodal iron(II) bis(pyridine) complex isomers trans- and cis-[Fe(pdmi)2]2+ with four NHC donors show 3MLCT→3MC population transfers with very different barriers and rationalize this by computational means. While trans-[Fe(pdmi)2]2+ possesses an unobservable activation barrier, the cis isomer exhibits a barrier of 492 cm-1, which leads to a nanosecond 3MLCT lifetime at 77 K. The kinetic and quantum chemical data were analyzed in the context of semi-classical Marcus theory revealing a high reorganization energy and small electronic coupling between the two triplet states. This highlights the importance of detailed structural control and kinetic knowledge for the rational design of photosensitizers from first row transition metals such as iron.

Luminescence Behavior of Cationic and Neutral CuI Complexes of Phosphine and Pyridine Embedded 1,2,3-Triazole

Synthesis of a potentially polydentate, phosphine and pyridine embedded 1,2,3-triazole, o-Ph2P(C6H4)C(CH)-1,2,3-N3(CH2)(Py) (1) (here onward referred to as "P∩N3∩N") and its copper complexes are described. Reactions of 1 with CuX yielded mononuclear [Cu{(P∩N3∩N)2-κ2-P,N}]X (2 - 4; X = I, CuBr2 and CuCl2) and dinuclear [Cu2{(P∩N3∩N)2-κ4-P,N,N,N}]X (5 X = OTf, 6 X = BF4) complexes. Interestingly, the cationic complex [Cu{(P∩N3∩N)2-κ2-P,N}]I (2) in acetonitrile changes into neutral complex [Cu3(μ2-I)2(μ3-I)(NCCH3){(P∩N3∩N)-κ4(μ2-P,N)(μ2-N,N)}](7), which on addition of dichloromethane reverts back to the cationic form. The photoluminescent characteristics of cationic complexes are significantly impacted by the nature of counteranions and hence the corresponding photoluminescence quantum yields. Cationic complex 2 showed an increase in quantum yield and lifetime on changing over to neutral complex 7. TD-DFT calculations also assisted in assessing the photophysical properties.

Impact of the Peripheral Ligand Layer on the Excited-State Deactivation Mechanism of Au38S2(S-Adm)20 and Au30(S-Adm)18 (S-Adm = Adamantanethiolate) Clusters

Gold nanoclusters are ideal fluorescent labels for biological imaging, disease diagnosis, and treatment. Understanding the origin of the photoluminescence phenomenon in ligand-protected gold nanoclusters is crucial for both basic science and practical applications. In this study, density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were performed to study the mechanism of excited state deactivation of Au38S2(S-Adm)20 and Au30(S-Adm)18 (S-Adm = adamantanethiolate) clusters, which have similar sizes and compositions. The computational results indicate that the differences in structural symmetry and peripheral ligand layer lead to quite different excited state deactivation mechanisms and excited state lifetimes in Au38S2(S-Adm)20 and Au30(S-Adm)18. Specifically, the μ3-S atoms and bridging thiolate (SR) in the ligand layer of Au38S2(S-Adm)20 significantly suppress the structural relaxation of ligand motifs, resulting in a prolonged excited state lifetime and higher quantum yield. For the Au30(S-Adm)18, due to the symmetry forbidden and large structural relaxation of the ligand shell, a rapid nonradiative transition process resulted. This study provides new insights into how the photoluminescence of ligand-protected gold nanoclusters is influenced by their structure and symmetry.

Time-dependent and clustering-induced phosphorescence, mechanochromism, structural-function relationships, and advanced information encryption based on isomeric effects and host-guest doping

To explore the intrinsic mechanism of pure organic room temperature and clustering-induced phosphorescence and investigate mechanochromism and structural-function relationships, here, 4-(2-(9H-carbazol-9-yl)phenyl)-2-amino-6-methoxypyridine-3,5-dicarbonitrile (Lo-CzAD), 4-(3-(9H-carbazol-9-yl)phenyl)-2-amino-6-methoxypyridine-3,5-dicarbonitrile (Lm-CzAD), and 4-(4-(9H-carbazol-9-yl)phenyl)-2-amino-6-methoxypyridine-3,5-dicarbonitrile (Lp-CzAD) were designed and synthesized by choosing self-made carbazole and 3, 5-dicyanopyridine (DCP) unit as electron acceptor and electron donor in sequence. Compared with crystals Lm-CzAD and Lp-CzAD, crystal Lo-CzAD shows better room temperature phosphorescence (RTP) performance, with RTP lifetimes of 187.16 ms, as well as afterglows 1s, which are attributed to twisted carbazole unit and donor-acceptor (D-A) molecular conformation, big crystal density and spin orbit coupling constant ξ (S1 → T1 and S1 → T2), as well as intermolecular H type stacking and small ξ (S0 → T1). By choosing urea and PPh3 as host materials and tuning doping ratio, four doping systems were successfully constructed, significantly improving RTP performance of Lo-CzAD and Lp-CzAD, as well as showing different fluorescence and RTP. The lifetimes and afterglows of pure organic Urea/Lo-CzAD and Urea/Lp-CzAD systems are up to 478.42 ms, 5 s, 261.66 ms and 4.5 s in turn. Moreover, Lo-CzAD and Lp-CzAD show time-dependent RTP in doping systems due to monomer and aggregate dispersion, as well as clustering-induced phosphorescence. Based on the different luminescent properties, multiple information encryptions were successfully constructed.

Wide-Range Excitation-Dependent Phosphorescence of Coordination Polymers Exhibiting Dynamic Anticounterfeiting, White-Light Emission, and Antibacterial Performance

Multicolor-tunable room-temperature phosphorescence (RTP) is attracting wide attention in optoelectronic applications. Here, we propose a coordination-oriented assembly approach to achieve wide-range RTP with a benzimidazole derivative (2,7-diazabenzimidazole, DZBIM) as a luminogen. These two compounds exhibit unexpected excitation-responsive RTP emission, and the phosphorescence emission nearly covers the entire visible region with the change of the excitation wavelength from 360 to 620 nm. To the best of our knowledge, this is the first report of coordination polymers with such a full-color-tunable RTP. Compound 1 also shows white-light emission upon excitation at 280 nm. Experimental and theoretical results demonstrate that multiple intermolecular interactions and emission centers from different aggregates are responsible for the generation of multicolor emission. The white-light emission and multiple anticounterfeiting are explored. Besides, compound 1 exhibits high antibacterial activity benefiting from efficient 1O2 generation. This work provides an efficient way to prepare a color-tunable RTP.

Thermal Annealing Effects on Long-Lived Fluorenol Room Temperature Phosphorescence for Styrene Detection

Fluorene derivatives have been widely developed in OLEDs because of its efficient fluorescence quantum efficiency, but for which unique rigid biphenyl planar structure and large conjugated system, we hypothesize that they have a great potential for room temperature phosphorescence (RTP) applications, and confirmed this conjecture by subjecting polyvinyl alcohol (PVA) and phosphors to thermal annealing. The cross-linked structure formed during thermal annealing judiciously modulates the phosphorescence emission characteristics of the fluorenol with the synergistic interaction between PVA and fluorenol. Specifically, the lifetime exhibited a substantial increase from 1352.2 ms to 2874.1 ms, accompanied by a quantum yield augmentation from 4.8 % to 11.3 %, which substantiate that cross-linked induced by thermal annealing effectively amplifies the phosphorescent intensity and stability of the phosphors, facilitating ultralong phosphorescent emission at ambient conditions. Furthermore, an effective probe based on this film is developed for its highly sensitive, quantitative and immediate detection of volatile organic compounds. This investigation not only proffers a novel paradigm for the development of advanced RTP materials but also imparts insightful considerations for optimizing the performance of polymers in conjunction with functional materials, encompassing bioimaging, sensing, and optoelectronic devices.

Photoactivated room temperature phosphorescence from lignin

Sustainable photoactivated room temperature phosphorescent materials exhibit great potential but are difficult to obtain. Here, we develop photoactivated room temperature phosphorescent materials by covalently attaching lignin to polylactic acid, where lignin and polylactic acid are the chromophore and matrix, respectively. Initially the phosphorescence of the lignin is quenched by residual O2. However, the phosphorescence is switched on when the residual oxygen is consumed by the triplet excitons of lignin under continuous UV light irradiation. As such, the lifetime increases from 3.0 ms to 221.1 ms after 20 s of UV activation. Interestingly, the phosphorescence is quenched again after being kept under an atmosphere of air for 2 h in the absence of UV irradiation due to the diffusion of oxygen into the materials. Using these properties, as-developed material is successfully used as a smart anti-counterfeiting logo for a medicine bottle and for information recording.

Pyrene-Alkyne-Based Conjugated Porous Polymers with Skeleton Distortion-Mediated ⋅O2 - and 1O2 Generation for High-Selectivity Organic Photosynthesis

Reactive oxygen species (ROS) play a crucial role in determining photocatalytic reaction pathways, intermediate species, and product selectivity. However, research on ROS regulation in polymer photocatalysts is still in its early stages. Herein, we successfully achieved series of modulations to the skeleton of Pyrene-alkyne-based (Tetraethynylpyrene (TEPY)) conjugated porous polymers (CPPs) by altering the linkers (1,4-dibromobenzene (BE), 4,4'-dibromobiphenyl (IP), and 3,3'-dibromobiphenyl (BP)). Experiments combined with theoretical calculations indicate that BE-TEPY exhibits a planar structure with minimal exciton binding energy, which favors exciton dissociation followed by charge transfer with adsorbed O2 to produce ⋅O2 -. Thus BE-TEPY shows optimal photocatalytic activity for phenylboronic acid oxidation and [3+2] cycloaddition. Conversely, the skeleton of BP-TEPY is significantly distorted. Its planar conjugation decreases, intersystem crossing (ISC) efficiency increases, which makes it more prone for resonance energy transfer to generate 1O2. Therefore, BP-TEPY displays best photocatalytic activity in [4+2] cycloaddition and thioanisole oxidation. Both above reactant conversion and its product selectivity exceed 99 %. This work systematically reveals the intrinsic structure-activity relationship among the skeleton structure of CPPs, excitonic behavior, and selective generation of ROS, providing new insights for the rational design of highly efficient and selective CPPs photocatalysts.

Lattice Symmetry-Guided Charge Transport in 2D Supramolecular Polymers Promotes Triplet Formation

Singlet-to-triplet intersystem crossing (ISC) in organic molecules is intimately connected with their geometries: by modifying the molecular shape, symmetry selection rules pertaining to spin-orbit coupling can be partially relieved, leading to extra matrix elements for increased ISC. As an analog to this molecular design concept, the study finds that the lattice symmetry of supramolecular polymers also defines their triplet formation efficiencies. A supramolecular polymer self-assembled from weakly interacting molecules is considered. Its 2D oblique unit cell effectively renders it as a coplanar array of 1D molecular columns weakly bound to each other. Using momentum-resolved photoluminescence imaging in combination with Monte Carlo simulations, the study found that photogenerated charge carriers in the supramolecular polymer predominantly recombine as spin-uncorrelated carrier pairs through inter-column charge transfer states. This lattice-defined recombination pathway leads to a substantial triplet formation efficiency (≈60%) in the supramolecular polymer. These findings suggest that lattice symmetry of micro-/macroscopic structures relying on intermolecular interactions can be strategized for controlled triplet formation.

Enhancing the Room-Temperature Phosphorescence Performance by Salinization of Guests

Although the host-guest doped strategy effectively improves the phosphorescence performance of materials and greatly enriches the variety of materials, most of the guests are organic molecules with weak luminescence ability, which leads to the need for further improvement in the phosphorescence performance of doped materials. Herein, by salinization of organic molecules, the luminescence performance of the guests was effectively improved, thereby significantly enhancing the phosphorescence performance of the doped system. A compound 4-(naphthalen-2-yl)quinoline (QL) containing nitrogen atom was synthesized as initial guest, then QL was salted to obtain six organic salt guests containing anions BF4-, PF6-, CF3SO3-, N(CF3SO2)2-, ClO4-, and C4F9SO3-, respectively. Two doped systems were constructed using benzophenone and poly(methyl methacrylate) as the hosts. The phosphorescence quantum yield and phosphorescence lifetime of doped materials with QL as guest were only 4.1%/5.2% and 131 ms/141 ms, while those of doped materials with salinized molecules as guests were improved to 32-39% and 534-625 ms, respectively. The single-crystal structures and theoretical calculations indicated that anions can not only enhance the intermolecular interaction of guests but also increase the spin-orbit coupling constant. This work provides an effective strategy for improving the phosphorescence performance of doped materials.

Tellurium Containing Long Lived Emissive Fluorophore for Selective and Visual Detection of Picric Acid through Photo-Induced Electron Transfer

A novel tellurium (Te) containing fluorophore, 1 and its nickel (2) and copper (3) containing metal organic complex (MOC) have been synthesized to exploit their structural and optical properties and to deploy these molecules as fluorescent probes for the selective and sensitive detection of picric acid (PA) over other commonly available nitro-explosives. Furthermore, density functional theory (DFT) and single crystal X-ray diffraction (SCXRD) techniques revealed the inclusion of "soft" Tellurium (Te) and "hard" Nitrogen (N), Oxygen (O) atoms in the molecular frameworks. Owing to the presence of electron rich "N" and "O" atoms along with "Te" in the molecular framework, 1 could efficiently and selectively sense PA with more than 80 % fluorescence quenching efficiency in organic medium and having detection limit of 4.60 μM. The selective detection of PA compared to other nitro-explosives follows a multi-mechanism based "turn-off" sensing which includes photo-induced electron transfer (PET), electrostatic (π-π stacking and π-anion/cation) interaction, intermolecular hydrogen bonding and inner filter effect (IFE). The test strip study also establishes the sensitivity of 1 for detection of PA.

Stepwise Stiffening Chromophore Strategy Realizes a Series of Ultralong Blue Room-Temperature Phosphorescent Materials

Ultralong room-temperature phosphorescent (URTP) materials have attracted wide attention in anti-counterfeiting, optoelectronic display, and bio-imaging due to their special optical properties. However, room-temperature blue phosphorescent materials are very scarce during applications because of the need to simultaneously populate and stabilize high-energy excited states. In this work, a stepwise stiffening chromophore strategy is proposed to suppress non-radiative jump by continuously reducing the internal spin of the chromophore, and successfully developing a series of blue phosphorescent materials. Phosphorescence lifetimes of more than 3 s are achieved, with the longest lifetime reaching 5.44 s and lasting more than 70 s in the naked eye. As far as is know, this is the best result that has been reported. By adjusting the chromophore conjugation, multicolor phosphorescences from cyan to green have been realized. In addition, these chromophores exhibit the same excellent optical properties in urea and polyvinyl alcohmance (PVA). Finally, these materials are successfully applied to luminescent displays.

Halogen Impact on the Supramolecular Organization of Chiral Phthalimide Emitters Displaying Room Temperature Phosphorescence

Room temperature phosphorescence from organic materials has attracted an increasing attention in the recent years due to their potential application in various advancing technologies, notably in bioimaging and displays. In this context, heavy atoms such as halogen ones revealed useful tools to enhance the spin-orbit coupling (SOC) of molecular organic phosphors. However, the effect of halogen at the supramolecular level remains less understood, especially in the field of molecular crystals where additional factors can impact the phosphorescence emission. Here, we investigate external effect of halogens on the phosphorescence of chiral phthalimides molecular crystals. The results show that changing the nature of the halogen atom onto the phthalimide core leads to an evolution of the photophysical properties of the materials which does not necessarily follow the classical trend imposed by the expected internal heavy atom effect. Beyond this aspect, we showed that the halogen atom has a profound impact on the packing between the chromophores at the supramolecular level which is of paramount importance towards the optical properties (PLQY and lifetimes) of the different phosphors examined.

Fast, efficient, narrowband room-temperature phosphorescence from metal-free 1,2-diketones: rational design and the mechanism

We report metal-free organic 1,2-diketones that exhibit fast and highly efficient room-temperature phosphorescence (RTP) with high colour purity under various conditions, including solutions. RTP quantum yields reached 38.2% in solution under Ar, 54% in a polymer matrix in air, and 50% in crystalline solids in air. Moreover, the narrowband RTP consistently dominated the steady-state emission, regardless of the molecular environment. Detailed mechanistic studies using ultrafast spectroscopy, single-crystal X-ray structure analysis, and theoretical calculations revealed picosecond intersystem crossing (ISC) followed by RTP from a planar conformation. Notably, the phosphorescence rate constant k p was unambiguously established as ∼5000 s-1, which is comparable to that of platinum porphyrins (representative heavy-metal phosphor). This inherently large k p enabled the high-efficiency RTP across diverse molecular environments, thus complementing the streamlined persistent RTP approach. The mechanism behind the photofunction has been elucidated as follows: (1) the large k p is due to efficient intensity borrowing of the T1 state from the bright S3 state, (2) the rapid ISC occurs from the S1 to the T3 state because these states are nearly isoenergetic and have a considerable spin-orbit coupling, and (3) the narrowband emission results from the minimal geometry change between the T1 and S0 states. Such mechanistic understanding based on molecular orbitals, as well as the structure-RTP property relationship study, highlighted design principles embodied by the diketone planar conformer. The fast RTP strategy enables development of organic phosphors with emissions independent of environmental conditions, thereby offering alternatives to precious-metal based phosphors.

Circularly Polarized Room Temperature Phosphorescence through Twisting-Induced Helical Structures from Polyvinyl Alcohol-Based Fibers Containing Hydrogen-Bonded Dyes

Room temperature phosphorescence (RTP) materials have garnered significant attention owing to its distinctive optical characteristics and broad range of potential applications. However, the challenge remains in producing RTP materials with more simplicity, versatility, and practicality on a large scale, particularly in achieving chiral signals within a single system. Herein, we show that a straightforward and effective combination of wet spinning and twisting technique enables continuously fabricating RTP fibers with twisting-induced helical chirality. By leveraging the hydrogen bonding interactions between polyvinyl alcohol (PVA) and quinoline derivatives, along with the rigid microenvironment provided by PVA chains, typically, Q-NH2@PVA fiber demonstrates outstanding phosphorescent characteristics with RTP lifetime of 1.08 s and phosphorescence quantum yield of 24.6 %, and the improved tensile strength being 1.7 times than pure PVA fiber (172±5.82 vs 100±5.65 MPa). Impressively, the transformation from RTP to circularly polarized room temperature phosphorescence (CP-RTP) is readily achieved by imparting left- or right-hand helical structure through simply twisting, enabling large-scale production of chiral Q-NH2@PVA fiber with dissymmetry factor of 10-2. Besides, an array of displays and encryption patterns are crafted by weaving or seaming to exemplify the promising applications of these PVA-based fibers with outstanding adaptivity in cutting-edge anti-counterfeiting technology.

High-efficiency color-tunable ultralong room-temperature phosphorescence from organic-inorganic metal halides via synergistic inter/intramolecular interactions

Materials exhibiting highly efficient, ultralong and multicolor-tunable room-temperature phosphorescence (RTP) are of practical importance for emerging applications. However, these are still very scarce and remain a formidable challenge. Herein, using precise structure design, several novel organic-inorganic metal-halide hybrids with efficient and ultralong RTP have been developed based on an identical organic cation (A). The original organic salt (ACl) exhibits red RTP properties with low phosphorescence efficiency. However, after embedding metals into the organic salt, the changed crystal structure endows the resultant metal-halide hybrids with excellent RTP properties. In particular, A2ZnCl4·H2O exhibits the highest RTP efficiency of up to 56.56% with a long lifetime of up to 159 ms. It is found that multiple inter/intramolecular interactions and the strong heavy-atom effect of the rigid metal-halide hybrids can suppress molecular motion and promote the ISC process, resulting in highly stable and localized triplet excitons followed by highly efficient RTP. More crucially, multicolor-tunable fluorescence and RTP achieved by tuning the metal and halogen endow these materials with wide application prospects in the fields of multilevel information encryption and dynamic optical data storage. The findings promote the development of phosphorescent metal-halide hybrids for potential high-tech applications.

Edible Long-Afterglow Photoluminescent Materials for Bioimaging

Confining luminophores into modified hydrophilic matrices or polymers is a straightforward and widely used approach for afterglow bioimaging. However, the afterglow quantum yield and lifetime of the related material remain unsatisfactory, severely limiting the using effect especially for deep-tissue time-resolved imaging. This fact largely stems from the dilemma between material biocompatibility and the quenching effect of water environment. Herein an in situ metathesis promoted doping strategy is presented, namely, mixing ≈10-3 weight ratio of organic-emitter multicarboxylates with inorganic salt reactants, followed by metathesis reactions to prepare a series of hydrophilic but water-insoluble organic-inorganic doping afterglow materials. This strategy leads to the formation of edible long-afterglow photoluminescent materials with superior biocompatibility and excellent bioimaging effect. The phosphorescence quantum yield of the materials can reach dozens of percent (the highest case: 66.24%), together with the photoluminescent lifetime lasting for coupes of seconds. Specifically, a long-afterglow barium meal formed by coronene salt emitter and BaSO4 matrix is applied into animal experiments by gavage, and bright stomach afterglow imaging is observed by instruments or mobile phone after ceasing the photoexcitation with deep tissue penetration. This strategy allows a flexible dosage of the materials during bioimaging, facilitating the development of real-time probing and theranostic technology.

The direct role of nuclear motion in spin-orbit coupling in strongly correlated spin systems

The interaction between the magnetic moment of an electron and the magnetic field generated by a moving charge is one component of the spin-orbit interaction. The nuclei in a molecule or solid are charged, are generally in vibrational motion, and so contribute to this interaction, but the direct coupling between nuclear momentum and electron spin is normally ignored in discussions of spin-forbidden phenomena such as transitions between states of different spin, even when the nuclei are recognized as playing a fundamental role (spin-vibronic coupling). Here, we investigate the spin-orbit interaction in a Heisenberg model interacting with vibrating point charges representing nearby bridging ligands. To reach the model, we apply second order perturbation theory to the Hubbard model with the spin-orbit interaction. In contrast to the other components of the spin-orbit interaction, the part that directly couples the momentum of the charge and electron spin appears at first order as an effective magnetic field at each site. We find that the inclusion of this nuclear-motion induced spin-orbit coupling can increase the rate of otherwise spin-forbidden transitions between different spin states of the Heisenberg model by many orders of magnitude. This overlooked interaction may, therefore, play a significant role in spin-forbidden phenomena such as spin relaxation in coupled spin-qubits.

Coupled-cluster treatment of complex open-shell systems: the case of single-molecule magnets

We investigate the reliability of two cost-effective coupled-cluster methods for computing spin-state energetics and spin-related properties of a set of open-shell transition-metal complexes. Specifically, we employ the second-order approximate coupled-cluster singles and doubles (CC2) method and projection-based embedding that combines equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) with density functional theory (DFT). The performance of CC2 and EOM-CCSD-in-DFT is assessed against EOM-CCSD. The chosen test set includes two hexaaqua transition-metal complexes containing Fe(II) and Fe(III), and a large Co(II)-based single-molecule magnet with a non-aufbau ground state. We find that CC2 describes the excited states more accurately, reproducing EOM-CCSD excitation energies within 0.05 eV. However, EOM-CCSD-in-DFT excels in describing transition orbital angular momenta and spin-orbit couplings. Moreover, for the Co(II) molecular magnet, using EOM-CCSD-in-DFT eigenstates and spin-orbit couplings, we compute spin-reversal energy barriers, as well as temperature-dependent and field-dependent magnetizations and magnetic susceptibilities that closely match experimental values within spectroscopic accuracy. These results underscore the efficiency of CC2 in computing state energies of multi-configurational, open-shell systems and highlight the utility of the more cost-efficient EOM-CCSD-in-DFT for computing spin-orbit couplings and magnetic properties of complex and large molecular magnets.

Blue Long Afterglow and Ultra Broadband Vis-NIR Emission from All-Inorganic Copper-Doped Silver Halide Single Crystals

All-inorganic metal halides with afterglow emission have attracted increasing attention due to their significantly longer afterglow duration and higher stability compared to their organic-inorganic hybrid counterparts. However, their afterglow colors have not yet reached the blue spectral region. Here, we report all-inorganic copper-doped Rb2AgBr3 single crystals with ultralong blue afterglow (>300 s) by modulating defect states through doping engineering. The introduction of copper(I) ions into Rb2AgBr3 facilitates the formation of bromine vacancies, thus increasing the density of trap states available for charge storage and enabling bright, persistent emission after ceasing the excitation. Moreover, cascade energy transfer between distinct emissive centers in the crystals results in ultra-broadband photoluminescence, not only covering the whole white light with near-unity quantum yield but also extending into the near-infrared region. This 'cocktail' of exotic light-emission properties, in conjunction with the excellent stability of copper-doped Rb2AgBr3 crystals, allowed us to demonstrate their implementation to solid-state lighting, night vision, and intelligent anti-counterfeiting.

Enzyme-activatable charge transfer in gold nanoclusters

Surface-protecting ligands, as a major component of metal nanoclusters (MNCs), can dominate molecular characteristics, performance behaviors, and biological properties of MNCs, which brings diversity and flexibility to the nanoclusters and largely promotes their applications in optics, electricity, magnetism, catalysis, biology, and other fields. We report herein the design of a new kind of water-soluble luminescent gold nanoclusters (AuNCs) for enzyme-activatable charge transfer (CT) based on the ligand engineering of AuNCs with 6-mercaptopurine ribonucleoside (MPR). This elaborately designed cluster, Au5(MPR)2, can form a stable intramolecular CT state after light excitation, and exhibits long-lived color-tunable phosphorescence. After the cleavage by purine nucleoside phosphorylase (PNP), the CT triplet state can be easily directed to a low-lying energy level, leading to a bathochromic shift of the emission band accompanied by weaker and shorter-lived luminescence. Remarkably, these ligand-engineered AuNCs show high affinity towards PNP as well as decent performance for analyzing and visualizing enzyme activity and related drugs. The work of this paper provides a good example for diversifying physicochemical properties and application scenarios of MNCs by rational ligand engineering, which will facilitate future interest and new strategies to precisely engineer solution-based nanocluster materials.

Geometry, reactivity descriptors, light harvesting efficiency, molecular radii, diffusion coefficient, and oxidation potential of RE(I)(CO)3Cl(TPA-2, 2'-bipyridine) in DSSC application: DFT/TDDFT study

Dye-sensitized solar cells (DSSCs) are an excellent alternative solar cell technology that is cost-effective and environmentally friendly. The geometry, reactivity descriptors, light-harvesting efficiency, molecular radii, diffusion coefficient, and excited oxidation state potential of the proposed complex were investigated. The calculations in this study were performed using DFT/TDDFT method with B3LYP functional employed on the Gaussian 09 software package. The calculations were used the 6-311 +  + G(d, p) basis set for the C, H, N, O, Cl atoms and the LANL2DZ basis set for the Re atom, with the B3LYP functional.. The balance of hole and electron in this complex has increased the efficiency and lifetime of DSSCs for photovoltaic cell applications. The investigated compound shows that the addition of the TPA substituent marginally changes the geometric structures of the 2, 2'-bipyridine ligand in the T1 state. As EDsubstituents were added to the compound, the energy gap widened and moved from ELUMO (- 2.904 eV) (substituted TPA) to ELUMO (- 3.122 eV) (unsubstituted). In the studying of solvent affects; when the polarity of the solvent decreases, red shifts appears in the lowest energy an absorption and emission band. Good light-harvesting efficiency, molecular radii, diffusion coefficient, excited state oxidation potential, emission quantum yield, and DSSC reorganization energy, the complex is well suited for use as an emitter in dye-sensitized solar cells. Among the investigated complexes mentioned in literature, the proposed complex was a suitable candidate for phosphorescent DSSC.

Antiprotozoal Pt(II) Complexes as Luminophores Bearing Monodentate P/As/Sb-Based Donors: An X-ray Diffractometric, Photoluminescence, and 121Sb-Mössbauer Spectroscopic Study with TD-DFT-Guided Interpretation and Predictive Extrapolation toward Bi

In this study, it is demonstrated that the radiative rate constant of phosphorescent metal complexes can be substantially enhanced using monodentate ancillary ligands containing heavy donor atoms. Thus, the chlorido coligand from a Pt(II) complex bearing a monoanionic tridentate C^N*N luminophore ([PtLCl]) was replaced by triphenylphosphane (PPh3) and its heavier pnictogen congeners (i.e., PnPh3 to yield [PtL(PnPh3)]). Due to the high tridentate-ligand-centered character of the excited states, the P-related radiative rate is rather low while showing a significant boost upon replacement of the P donor by heavier As- and Sb-based units. The syntheses of the three complexes containing PPh3, AsPh3, and SbPh3 were completed by unambiguous characterization of the clean products using exact mass spectrometry, X-ray diffractometry, bidimensional NMR, and 121Sb-Mössbauer spectroscopy (for [PtL(SbPh3)]) as well as steady state and time-resolved photoluminescence spectroscopies. Hence, it was shown that the hybridization defects of the Vth main-group atoms can be overcome by complexation with the Pt center. Notably, the enhancement of the radiative rate constants mediated by heavier coligands was achieved without significantly influencing the character of the excited states. A rationalization of the results was achieved by TD-DFT. Even though the Bi-based homologue was not accessible due to phenylation side reactions, the experimental data allowed a reasonable extrapolation of the structural features whereas the hybridization defects and the excited state properties related to the Bi-species and its phosphorescence rate can be predicted by theory. The three complexes showed an interesting antiprotozoal activity, which was unexpectedly notorious for the P-containing complex. This work could pave the road toward new efficient materials for optoelectronics and novel antiparasitic drugs.