Preparation and Post-Assembly Modification of Metallosupramolecular Assemblies from Poly(N-Heterocyclic Carbene) Ligands

Photoluminescence of Tetra(benzimidazole)phenylethene Derivatives and Their Carbene Metallacycles in Aggregates and Langmuir-Blodgett Films

Molecular structure, external stimuli, and environmental factors all have a strong effect on the internal molecular rotation and vibration of aggregate-induced emission (AIE) luminogens. Here, we report the AIE effect for several newly synthesized amphiphilic tetra(benzimidazole)phenylethene (TBiPE) derivatives and their binuclear N-heterocyclic carbene silver (NHC-Ag) metallacycles in solutions, aggregates, and Langmuir-Blodgett (LB) films. Monolayer behaviors and microscopic images indicate that introducing alkyl chains and binuclear NHC-Ag metallacycles can facilitate the formation of a well-defined insoluble monomolecular layer at the air-water interface. Absorption and luminescence spectral features suggest that both the TBiPEs' cyclization structure and binuclear NHC-Ag metallacycles can provide additional driving forces to restrict the internal molecular motion of the tetraphenylethene (TPE) unit, thus enhancing the AIE effects. Further, external stimuli and environmental factors such as poor solvent addition and LB film deposition also play important roles in the photoluminescent intensity, maximum wavelength, and lifetime. These internal and external factors can result in around 30-40 nm blue-shift for the maximum luminescence wavelength and 2-3 times shorter for the luminescent lifetime. These phenomena can be attributed to the reason that the nonradiative energy transfer efficiency is weakened because of the enhanced hydrophobic interaction and metal-carbene coordination as well as the closely packed arrangement of AIEgens in the LB films; consequently, the radiation energy transfer efficiency increased.

Assembling a new generation of radiopharmaceuticals with supramolecular theranostics

Supramolecular chemistry has been used to tackle some of the major challenges in modern science, including cancer therapy and diagnosis. Supramolecular platforms provide synthetic flexibility, rapid generation through self-assembly, facile labelling, unique topologies, tunable reversibility of the enabling noncovalent interactions, and opportunities for host-guest chemistry and mechanical bonding. In this Review, we summarize recent advances in the design and radiopharmaceutical application of discrete self-assembled coordination complexes and mechanically interlocked molecules - namely, metallacages and rotaxanes, respectively - as well as in situ-forming supramolecular aggregates, specifically pinpointing their potential as next-generation radiotheranostic agents. The outlook of such supramolecular constructs for potential applications in the clinic is discussed.

Synthesis of a Metalla[2]catenane, Metallarectangles and Polynuclear Assemblies from Di(N-Heterocyclic Carbene) Ligands

The 2,7-fluorenone-linked bis(6-imidazo[1,5-a]pyridinium) salt H2-1(PF6)2 reacts with Ag2O in CH3CN to yield the [2]catenane [Ag4(1)4](PF6)4. The [2]catenane rearranges in DMF to yield two metallamacrocycles [Ag2(1)2](PF6)2. 2,7-Fluorenone-bridged bis-(imidazolium) salts H2-L(PF6)2 (L=2 a, 2 b) react with Ag2O in CH3CN to yield metallamacrocycles [Ag2(L)2](PF6)2 with interplanar distances between the fluorenone rings too small for [2]catenane formation. Intra- and intermolecular π⋅⋅⋅π interactions between the fluorenone groups were observed by X-ray crystallography. The strongly kinked 2,7-fluorenone bridged bis(5-imidazo[1,5-a]pyridinium) salt H2-4(PF6)2 reacts with Ag2O to yield [Ag2(4)(CN)](PF6), while the tetranuclear assembly [Ag4(4)2(CO3)](PF6)2 was obtained in the presence of K2CO3.

Photomechanical responses of coordination polymers regulated by precise organization of the photoactive centers

Three photoactive Cd(II) coordination polymers (CPs), [Cd (Fsbpe)(DBBA)2]·2DMF (CP1), [Cd(Fepbpe)(DBBA)2]·2DMF (CP2) and [Cd(Fsbpeb)(DBBA)2] (CP3) (DBBA = 3,5-dibromobenzoic acid, DMF = dimethyl formamide) with similar 1D chain motifs exhibited completely different photosalient behaviors (PS) in response to UV light. Mechanical motion was triggered by [2+2] photocycloaddition and regulated by positioning of the photoactive alkene centers relative to the crystal axis. This solid-state reaction was reversed by heating and photomechanical behaviour was repeated over several cycles. A simple photoactuating device was prepared using a CP3-PVA composite.

Atomically Precise Ternary Cluster: Polyoxometalate Cluster Sandwiched by Gold Clusters Protected by N-Heterocyclic Carbenes

Coinage metal (Au, Ag, Cu) cluster and polyoxometalate (POM) cluster represent two types of subnanometer "artificial atoms" with significant potential in catalysis, sensing, and nanomedicine. While composite clusters combining Ag/Cu clusters with POM have achieved considerable success, the assembly of gold clusters with POM is still lagging. Herein, we first designedly synthesized two cluster structural units: an Au3O cluster stabilized by diverse N-heterocyclic carbene (NHC) ligands and an amine-terminated POM linker. The subsequent reaction involved amine substitution in the POM linker for the central O atom in the Au3O cluster, resulting in the first ternary composite cluster-a POM cluster sandwiched by two Au clusters protected by NHCs. Single-crystal X-ray diffraction and other characteristic methods characterized their atomically precise structures. Furthermore, altering the NHC ligands decreased the number of gold atoms in the sandwich structures, accompanying the different protonated degrees of amine ligand in the terminal end of the POM linker. These composite clusters showed excellent performances in catalytic H2O2 conversion through the synergistic effect between gold clusters and POM clusters. This work opens a new avenue to functional composite metal clusters and would promote their enhanced catalysis applications through intercluster synergistic interactions within composite systems.

Discrete Quadruple Stacks Formed in a Nanosized Metallorectangle

An iridium-cornered nanosized metallorectangle was obtained by combining a quinoxalinophenanthrophenazine-connected Janus-di-imidazolylidene ligand and 4,4'-bipyridine. This metallorectangle was used as host for a series of planar molecules, including pyrene, triphenylene, perylene, coronene, and N,N'-dimethyl-naphthalenetetracarboxy-diimide (NTCDI). The binding of coronene and NTCDI followed a strongly positive cooperative 1:2 stoichiometric binding model, as the inclusion of the first guest generates the geometrical requirements for the optimum encapsulation of the second planar molecule. The simultaneous encapsulation of coronene and NTCDI produces a heteroguest inclusion system, whose exchange dynamics was studied by means of variable temperature 1H NMR spectroscopy.

An N-heterocyclic carbene-based pincer system of palladium and its versatile reactivity under oxidizing conditions

NHC-based pincers (NHC = N-heterocyclic carbene) have been broadly employed as supporting platforms, and their palladium complexes have found many synthetic applications. However, previous studies mainly focused on the NHC pincers of palladium featuring an oxidation number of +II. In contrast, oxidation of these well-defined Pd(II) species and the study of their fundamental high-valent Pd chemistry remain largely undeveloped. In addition, from a perspective of PdII/PdIV catalysis, the reactivity and degradation of NHC pincers in catalytically relevant reactions have not been well understood. In this work, a series of Pd(II) complexes supported by a well-known NHC^Aryl^NHC pincer platform have been prepared. Their reactivity towards various oxidizing reagents, including halogen surrogates, electrophilic fluorine reagents, and alkyl/aryl halides, has been examined. In some cases, ambient-characterizable high-valent Pd NHCs, which have been scarcely reported, were obtained. The carbenes incorporated into the pincer framework proved to be effective spectator donors. In contrast, the central aryl moiety exhibits versatile reactivity and collapse pathways, allowing it to function either as a spectator or a non-innocent actor.

Stereoselective Solid-State Synthesis of Biologically Active Cyclobutane and Dicyclobutane Isomers via Conformation Blocking and Transference

Conformations in the solid state are typically fixed during crystallization. Transference of "frozen" C=C conformations in 3,5-bis((E)-2-(pyridin-4-yl)vinyl)methylbenzene (CH3-3,5-bpeb) by photodimerization selectively yielded cyclobutane and dicyclobutane isomers, one of which (Isomer 2) exhibited excellent in vitro anti-cancer activity towards T-24, 7402, MGC803, HepG-2, and HeLa cells.

Application of phosphorus-bridged rigid, bent bis(NHCs) as dipodal ligands in main group and transition metal chemistry

Phosphorus-bridged rigid, bent bis(N-heterocyclic) carbenes have not been reported, so far, despite having structural features that could make them interesting ligands in coordination and main group element chemistry. In previous reports, we had demonstrated that tuning of σ3- and σ4-phosphorus environments in planarised bis(NHCs) affects electronic properties and can provide additional coordination sites. Herein, we report on first examples of synthesis and conversion of 1,4-diphosphabarrelene-related compounds into rigid bent, doubly P-bridged bis(NHCs). The formation of main group element adducts with substrates from group 13, 14 and 15 illustrates opportunities to access novel scaffolds and to create nonplanar branching points. DFT calculations reveal the new bis(NHCs) to be good candidates as novel soft/hard ligands with up to four coordination sites. The synthesis of a dinuclear Fe(CO)4 complex is demonstrated. The thermal retro-[4 + 2] cycloaddition was theoretically and experimentally explored for a variety of ionic and zwitterionic 1,4-diphosphabarrelenes, and the generation and trapping of a dinuclear Fe(0) bis(NHC) complex with a tricyclic 1σ2,4 σ2-diphosphinine scaffold is presented.

Guest-Shuttling in a Nanosized Metallobox

An iridium-conjoined long and narrow metallorectangle was obtained by combining a quinoxalinophenanthrophenazine-connected Janus-di-imidazolylidene ligand and pyrazine. The size and shape of this assembly together with the fused polyaromatic nature of its panels provides it with properties that are uncommon for other metallosupramolecular assemblies. For example, this nanosized 'slit-like' metallobox is able show very large binding affinities with planar organic molecules in such a way, that the cavity is asymmetrically occupied by the guest molecule. This unsymmetrical conformation leads to the existence of a large amplitude motion of these guests, which slide between the two sides of the cavity of the host, thus constituting rare examples of molecular shuttles.

Coordination-Induced Emissive Poly-NHC-Derived Metallacage for Pesticide Detection

Developing sensitive, rapid, and convenient methods for the detection of residual toxic pesticides is immensely important to prevent irreversible damage to the human body. Luminescent metal-organic cages and macrocycles have shown great applications, and designing highly emissive supramolecular systems in dilute solution using metal-ligand coordination-driven self-assembly is demanded. In this study, we have demonstrated the development of a silver-carbene bond directed tetranuclear silver(I)-octacarbene metallacage [Ag4(L)2](PF6)4 (1) based on an aggregation-induced emissive (AIE) cored 1,1',1″,1‴-((1,4-phenylenebis(ethene-2,1,1-triyl))tetrakis(benzene-4,1-diyl))tetrakis(3-methyl-1H-imidazol-3-ium) salt (L). A 36-fold enhanced emission was observed after metallacage (1) formation when compared with the ligand (L) in dilute solution due to the restriction of intramolecular motions imparted by metal-ligand coordination. Such an increase in fluorescence made 1 a potential candidate for the detection of a broad-spectrum pesticide, 2,6-dichloro-nitroaniline (DCN). 1 was able to detect DCN efficiently by the fluorescence quenching method with a significant detection limit (1.64 ppm). A combination of static and dynamic quenching was applicable depending on the analyte concentration. The use of silver-carbene bond directed self-assembly to exploit coordination-induced emission as an alternative to AIE in dilute solution and then apply this approach to solve health and safety concerns is noteworthy and carries a lot of potential for future developments.

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Light-Responsive Supramolecular Liquid-Crystalline Metallacycle for Orthogonal Multimode Photopatterning

The development of multimode photopatterning systems based on supramolecular coordination complexes (SCCs) is considerably attractive in supramolecular chemistry and materials science, because SCCs can serve as promising platforms for the incorporation of multiple functional building blocks. Herein, we report a light-responsive liquid-crystalline metallacycle that is constructed by coordination-driven self-assembly. By exploiting its fascinating liquid crystal features, bright emission properties, and facile photocyclization capability, a unique system with spatially-controlled fluorescence-resonance energy transfer (FRET) is built through the introduction of a photochromic spiropyran derivative, which led to the realization of the first example of a liquid-crystalline metallacycle for orthogonal photopatterning in three-modes, namely holography, fluorescence, and photochromism.

Evolution of Polynuclear Gold(I) Sulfido Complexes from Clusters and Cages to Macrocycles

Two unprecedented tetratriacontanuclear and tetraicosanuclear gold(I) sulfido clusters (denoted as Au34-LMe and Au24-LCbz) with different temperature-induced stimulus-responsive behavior and emission property have been constructed by taking advantage of the judiciously designed bidentate phosphine ligand. Au34-LMe represents the highest nuclearity of the gold(I) sulfido cluster with more than a thousand atoms in the molecule. Octagonal macrocycles based on metal-cluster nodes have been assembled for the first time. The self-assembly and temperature-induced stimulus-responsive processes were monitored by 1H and 31P{1H} NMR spectroscopy, and the identities of the discrete gold(I) complexes were established by single-crystal structural analysis and high-resolution electrospray ionization mass spectrometry data. The steric effects exerted by the substituents on the V-shaped 1,3-bis(diphenylphosphino)benzene ligand have been shown to govern the self-assembly from the 1D cluster and 3D cage to 2D macrocycles. This work not only offers a new strategy to construct and regulate the structure of 2D macrocyclic gold(I) sulfido complexes but also lays the foundation for the future precise design and controlled construction of higher polygonal and cluster-node macrocycles.

A stable rhodium-coordinated carbene with a σ0π2 electronic configuration

Isolable singlet carbenes have universally adopted a σ2π0 electronic state, making them σ-donors and π-acceptors. We present a rhodium-coordinated, cationic cyclic diphosphinocarbene with a σ0π2 ground state configuration. Nuclear magnetic resonance spectroscopy studies show a carbene carbon chemical shift below -30.0 parts per million. X-ray crystallography reveals a planar RhP2C configuration. Quantum chemical calculations rationalize how σ-electron delocalization/donation and π-electron negative hyperconjugation together stabilize the formally vacant σ orbital and the filled π orbital at the carbene center. In contrast to traditional carbene counterparts this carbene can undergo synthetic transformations with both a Lewis base and a silver salt, producing a Lewis acid/base adduct and a silver π-complex, respectively. Exhibiting ambiphilic reactivity, it can also form a ketenimine through reaction with an isocyanide.

Construction and Hierarchical Self-Assembly of a Supramolecular Metal-Carbene Complex with Multifunctional Units

Hierarchical combinations involving metal-ligand interactions and host-guest interactions can consolidate building blocks with unique functions into material properties. This study reports the construction and hierarchical self-assembly of multifunctional trinuclear AuI tricarbene complex containing three crown ether units and three ferrocene units. Host-guest interactions between the multifunctional trinuclear AuI tricarbene complex and organic ammonium salts were investigated, revealing that crown ether-based host-guest interactions can effectively regulate the electrochemical properties of the complex. Utilizing bisammonium salt as the cross-linker and multifunctional trinuclear AuI tricarbene complex as the core, a stimuli-responsive and self-healing supramolecular gel with different functional units was obtained.

Unravelling the Roles of Solvophobic Effects and π⋅⋅⋅π Stacking Interactions in the Formation of [2]Catenanes Featuring Di-(N-Heterocyclic Carbene) Building Blocks

A series of [2]catenanes has been prepared from di-NHC building blocks by utilizing solvophobic effects and/or π⋅⋅⋅π stacking interactions. The dinickel naphthobiscarbene complex syn-[1] and the kinked biphenyl-bridged bipyridyl ligand L2 yield the [2]catenane [2-IL](OTf)4 by self-assembly. Solvophobic effects are pivotal for the formation of the interlocked species. Substitution of the biphenyl-linker in L2 for a pyromellitic diimide group gave ligand L3 , which yielded in combination with syn-[1] the [2]catenane [3-IL](OTf)4 . This assembly exhibits enhanced stability in diluted solution, aided by additional π⋅⋅⋅π stacking interactions. The π⋅⋅⋅π stacking was augmented by the introduction of a pyrene bridge between two NHC donors in ligand L4 . Di-NHC precursor H2 -L4 (PF6 )2 reacts with Ag2 O to give the [Ag2 L4 2 ]2 [2]catenane [4-IL](PF6 )4 , which shows strong π⋅⋅⋅π stacking interactions between the pyrene groups. This assembly was readily converted into the [Au2 L4 2 ]2 gold species [5-IL](PF6 )4 , which exhibits exceptional stability based on the strong π⋅⋅⋅π stacking interactions and the enhanced stability of the Au-CNHC bonds.

Controllable Topological Transformations of 818 Molecular Metalla-knots by Oxidation of Thiazole-Based Ligands

By exploiting coordination-driven self-assembly, high yields of two 818 molecular metalla-knots could be obtained using a thiazole-moiety-containing asymmetric dipyridyl ligand 2-(pyridin-4-yl)-5-(pyridin-4-ylethynyl)benzo[d]thiazole (L1 ), as confirmed using X-ray crystallographic analysis, electrospray ionization-time-of-flight/mass spectrometry (ESI-TOF/MS), and detailed liquid-state nuclear magnetic resonance (NMR) spectroscopy. To modulate the self-assembled structures, m-chloroperbenzoic acid (m-CPBA) was utilized to oxidize thiazole-based ligand L1 to N-thiazole-oxide-based ligand 2-(pyridin-4-yl)-5-(pyridin-4-ylethynyl)benzo[d]thiazole 3-oxide (L2 ), which enabled the selective construction of the corresponding tetranuclear macrocycles. Notably, two molecular metalla-knots could be topologically transformed from 818 knots to simple monocycles because the L1 alkyne bond was inert toward m-CPBA, as confirmed by liquid-state NMR spectroscopy, ESI-TOF/MS, and elemental analysis.

Silver and Gold Pillarplex Pseudorotaxanes from α,ω-Dicarboxylic Acids

A series of pseudorotaxanes with supramolecular organometallic silver(I) and gold(I) pillarplexes acting as rings and different α,ω-dicarboxylic acids as axle components are reported. The successful formation of the host-guest complexes is shown by 1 H NMR spectroscopy and respective NMR titration. Additional evaluation with ITC titration experiments yielded dissociation constants (Kd ) ranging from 10-5 to 10-7  M. Single-crystal X-Ray diffraction analysis reveals a particularly exciting pore alignment of different examples in the solid state depending on the length of the guest. The work highlights, that dicarboxylic acids can penetrate the tight tubular pillarplex pore, paving the way to future mechanically interlocked molecules and materials.

Coordination Behavior of the Tellurium Incorporated Mercuraazametallamacrocycle and Investigation of d10 ⋅⋅⋅d10 Interactions between Closed Shell (Ag+ Hg2+ ) Metal Ions

Herein, a new tellurium and mercury containing mercuraazametallamacrocycle has been prepared via (2+2) condensation of bis(o-aminophenyl)telluride and bis(o-formylphenyl)mercury(II). The isolated bright yellow solid of mercuraazametallamacrocycle has adopted unsymmetrical figure-of-eight conformation in the crystal structure. To study the metallophilic interactions between closed shell metal ions, the macrocyclic ligand has been treated with two equiv. of AgOTf (OTf=trifluoromethansulfonate) and AgBF4 , which afforded greenish-yellow bimetallic silver complexes. The isolated silver complexes displayed intramolecular Hg⋅⋅⋅Ag, Te⋅⋅⋅Ag interactions as well as intermolecular Hg⋅⋅⋅Hg interactions and formed an extended 1D molecular chain by directing six atoms to interact as TeII ⋅⋅⋅AgI ⋅⋅⋅HgII ⋅⋅⋅HgII ⋅⋅⋅AgI ⋅⋅⋅TeII in a non linear fashion. The Hg⋅⋅⋅Ag, Te⋅⋅⋅Ag interactions have also been studied in solution by 199 Hg, 125 Te NMR spectroscopy, absorption, and emission spectroscopy. In DFT calculations, the Atom in Molecule (AIM) analysis, non-covalent interactions (NCI), natural bonding orbital (NBO) analysis strongly supported for experimental evidences and revealed that the intermolecular Hg⋅⋅⋅Hg interaction is stronger than the intramolecular Hg⋅⋅⋅Ag interactions.

Rigidification-Induced Emissive Metal-Carbene Complexes for Artificial Light Harvesting

A tetraphenylethylene (TPE)-based flexible imidazolium (L) salt was used to develop a di-nuclear silver(I)-tetracarbene (1) complex. Coordination-induced rigidity upon formation of 1 exhibited a 6-fold increase in emission intensity in acetonitrile compared to starting L. Despite TPE being a well-known aggregation-induced emissive moiety, Ag^I-N-heterocyclic carbene (NHC) complex 1 had a remarkably higher fluorescence emission (4-fold) in dilute solution when compared with L in its aggregated state. Finally, this enhanced emission was used to institute a new platform for an artificial light-harvesting system. 1 acted as an energy donor and efficiently transferred energy to Eosin Y (ESY) with a high saturation at a 67:1 (1/ESY) molar ratio. Use of rigidification-induced emission of the Ag^I-NHC complex to fabricate a light-harvesting scaffold is a new approach and can greatly impact the generation of smart materials.

Anti-Cancer and Radio-Sensitizing Properties of New Bimetallic (N-Heterocyclic Carbene)-Amine-Pt(II) Complexes

Bioactive NHC-transition metal complexes have shown promise as anti-cancer agents, but their potential use as radiosensitizers has been neglected so far. We disclose here a new series of bimetallic platinum(II) complexes displaying NHC-type bridging ligands, (bis-NHC)[trans-Pt(RNH₂)I₂]₂, that have been synthesized via a simple, two-step procedure. They display cytotoxicity in the micromolar range on cancerous cell lines, accumulate in cells, and bind to genomic DNA, by inducing DNA damages. Notably, these bimetallic complexes demonstrate significant radiosensitizing effects on both ovarian cells A2780 and nonsmall lung carcinoma cells H1299. Further investigations revealed that bimetallic species make irradiation-induced DNA damages more persistent by inhibiting repair mechanisms. Indeed, a higher and persistent accumulation of both γ-H2AX and 53BP1 foci post-irradiation was detected, in the presence of the NHC-Pt complexes. Overall, we provide the first in vitro evidence for the radiosensitizing properties of NHC-platinum complexes, which suggests their potential use in combined chemo-radio therapy protocols.

Metal-N-Heterocyclic Carbene Chemistry Directed toward Metallosupramolecular Synthesis and Beyond

ConspectusAs versatile, modular, and strongly coordinating moieties in organometallic compounds, N-heterocyclic carbenes (NHCs) have led to numerous breakthroughs in transition-metal catalysis, main group chemistry, and organocatalysis. In contrast, the chemistry of NHC-based metallosupramolecular assemblies, in which discrete individual components are held together via metal (M)-C_NHC bonds, has been underdeveloped. Integrating NHCs into supramolecular assemblies would endow them with some unforeseen functions. However, one of the most critical challenges is seeking an appropriate combination of the rigid C_NHC-M-C_NHC units with the resulting topologies and applications. Toward this goal, for the last decade we have focused on the development of M-NHC directed toward metallosupramolecular synthesis. This Account aims to summarize our contributions to the application of M-NHC chemistry toward supramolecular synthesis from structural design to postassembly modification (PAM) and their functional applications since integrating NHCs into supramolecular assemblies has garnered much attention among organometallic, photochemical, and supramolecular researchers. While presenting representative examples of NHC-based architectures, we try to illustrate the purposes and concepts behind the systems developed to aid the rational approach to the design and fabrication of complex assemblies and M-NHC-templated photochemical reactions.We present synthetic approaches for new architectures by the rational design of starting NHC precursors, including the poly-NHC-based mechanically interlocked metallacages and the heteroleptic architectures based on electronic complementary and self-sorting mechanisms. The structural regulation of poly-NHC-based architectures with increasing topological complexity is elaborated on by selective combinations of tetraphenylethylene (TPE) units, NHC backbones, and N-wingtip substituents in a controllable manner.Subsequently, we move to elucidating an M-NHC-templated PAM approach that leads to functional organic cages featuring polyimidazolium/triazolium groups of different shapes and sizes that are difficult to access using alternative organic approaches. These organic cages possess well-defined cavities, and their in situ-generated NHC sites are ideal platforms for stabilizing metal nanoparticles (MNPs) within their cavities for improved catalytic performance.Finally, we demonstrate how to design supramolecular M-NHC templates to synthesize cyclobutane derivatives in homogeneous solutions in a catalytic fashion. Selected examples of M-NHC template-dependent structural transformations and photoreactions are discussed. Their applications in molecular recognition, aggregation-induced emission (AIE), cell imaging, anticancer activity, radical chemistry, and stimuli-responsive materials are also described.Taken together, M-NHC-templated approaches have proven to be powerful methods for constructing diverse architectures with functional applications. The development of this methodology is still in its infancy, with tremendous growth potential and a promising future. We believe that this Account will guide researchers to design fascinating and valuable M-carbene species for diverse applications.

Reactions of noble-metal oxides in ionic liquids near room temperature

The reaction of Ag₂O, Au₂O₃, and HgO with CuCl, CuI, AgCl, AgI, AuCl, and AuI in ionic liquids ([EMIm]Cl, [BMIm]Cl) near room temperature (20-80 °C) is evaluated and results in the new compounds (C₈H₁₄N₂)CuCl, (C₈H₁₄N₂)AgI, (C₆H₁₀N₂)AuCl, [(C₈H₁₄N₂)₂Hg][CuCl₃], [(C₈H₁₄N₂)₂Hg][AgCl₃], and [EMIm][Ag₂I₂Cl]. Thereof, (C₈H₁₄N₂)CuCl, (C₈H₁₄N₂)AgI, (C₆H₁₀N₂)AuCl, [(C₈H₁₄N₂)₂Hg][CuCl₃], and [(C₈H₁₄N₂)₂Hg][AgCl₃] are NHC complexes (NHC: N-heterocyclic carbene) with M-C bonds (M: Cu, Ag, Au, Hg). Whereas (C₈H₁₄N₂)CuCl and (C₈H₁₄N₂)AgI crystallize as single molecules, (C₆H₁₀N₂)AuCl is dimerized via aurophilic interactions. [(C₈H₁₄N₂)₂Hg][CuCl₃] and [(C₈H₁₄N₂)₂Hg][AgCl₃] exhibit Hg atoms with two Hg-C bonds. Moreover, (C₈H₁₄N₂)AgI shows intense green fluorescence at room temperature with a quantum yield of 44%, whereas all other compounds do not show any emission at room temperature. Finally, [EMIm][Ag₂I₂Cl] is not an NHC compound but contains _∞ ¹[AgI_1/2I_2/4Cl_1/2]^- chains with infinite d¹⁰-d¹⁰ interaction of the silver atoms. The title compounds are characterized by single-crystal structure analysis, infrared spectroscopy, thermogravimetry, and fluorescence spectroscopy.

Self-Assembled Encapsulation of CuX2- (X = Br, Cl) in a Gold Phosphine Box-like Cavity with Metallophilic Au-Cu Interactions

Synthetic routes to the crystallization of two new box-like complexes, [Au6(Triphos)4(CuBr2)](OTf)5·(CH2Cl2)3·(CH3OH)3·(H2O)4 (1) and [Au6(Triphos)4 (CuCl2)](PF6)5·(CH2Cl2)4 (2) (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine), have been developed. The two centrosymmetric cationic complexes have been structurally characterized through single-crystal X-ray diffraction and shown to contain a CuX2- (X = Br or Cl) unit suspended between two Au(I) centers without the involvement of bridging ligands. These colorless crystals display green luminescence (λem = 527 nm) for (1) and teal luminescence (λem = 464 nm) for (2). Computational results document the metallophilic interactions that are involved in positioning the Cu(I) center between the two Au(I) ions and in the luminescence.

Organometallic Borromean Rings and [2]Catenanes Featuring Di-NHC Ligands

We report herein a series of organometallic Borromean rings (BRs) and [2]catenanes prepared from benzobiscarbene ligands. The reaction of dinickel complexes of the benzobiscarbenes 1 a-1 c with a thiazolothiazole bridged bipyridyl ligand L² led by self-assembly to a series of organometallic BRs. Solvophobic effects played a crucial role in the formation and stability of the interlocked species. The stability of BRs is related to the N-alkyl substituents at the precursors 1 a-1 c, where longer alkyl substitutes improve stability and inter-ring interactions. Solvophobic effects are also important for the stability of [2]catenanes prepared from 1 a-1 c and a flexible bipyridyl ligand L³ . In solution, an equilibrium between the [2]catenanes and their macrocyclic building blocks was observed. High proportions of [2]catenanes were obtained in concentrated solutions or polar solvents. The proportion of [2]catenanes in solution could be further enhanced by lengthening of the N-alkyl substitutes.

Synthesis of triarylborane-centered N-heterocyclic carbene cages with tunable photophysical properties

Triarylborane-based discrete metal-carbene supramolecular cages [M₃(1)₂](PF₆)₃ (M = Ag, Au) were synthesized and characterized. The new hexacarbene assemblies show a significant solvatochromic effect in solvents of different polarity. Furthermore, the reversible fluoride binding property of [Au₃(1)₂](PF₆)₃ was investigated by UV-vis absorption and fluorescence titrations. This work holds promise for future developments in the area of highly emissive and stimulus-responsive NHC-metal assemblies.

Formation of Metallosupramolecular Helicates and Mesocates from Poly-N-Heterocyclic Carbene Ligands

In this work, a series of poly-NHC-based tetranuclear silver helicates and mesocates were synthesized from the silver-mediated self-assembly of the ligands involving multiple tridentate CNC-type pincer units and NHC coordination sites. The silver helicate was found to be transferred to a gold mesocate upon metal exchange reaction. The metallosupramolecular helicates and mesocates have been fully characterized by single-crystal X-ray crystallography, mass spectrometry, and multinuclear nuclear magnetic resonance spectroscopies. This study provides an example of the selective preparation of poly-NHC-based helicates or mesocates depending on the size of metal ions and the steric effect of ligands.

Solvato-Controlled Assembly and Structural Transformation of Emissive Poly-NHC-Based Organometallic Cages and Their Applications in Amino Acid Sensing and Fluorescence Imaging

Stimuli-induced structural transformation of supramolecular cages has drawn increasing attention because of their sensitive feature to external variations as model systems to simulate biological processes. However, combining structural transformation and useful functions has remained a difficult task. This study reports the solvato-controlled self-assembly of two unique topologies with different emission characteristics, a water-soluble Ag₈ L₄ cage (A) and an Ag₄ L₂ cage (B), produced from the same sulfonate-pendant tetraphenylethene (TPE) bridged tetrakis-(1,2,4-triazolium) ligand. Both cages show interesting solvent-responsive reversible structural transformation, and the change of fluorescence signals can efficiently track the process. Additionally, water-soluble cage A exhibits unique properties in thermochromism, thiol amino acid sensing, and subcellular imaging in aqueous media.

Diantimony Complexes [CpR 2 Mo2 (CO)4 (μ,η2 -Sb2 )] (CpR =C5 H5 , C5 H4 t Bu) as Unexpected Ligands Stabilizing Silver(I)n (n=1-4) Monomers, Dimers and Chains

Synthesis and reactivity of transition metal compounds bearing "naked" pnictogen atoms is an active research area with remarkable bonding patterns observed in the formed compounds. Within this field, intense investigations on the coordination behavior of complexes possessing Pn and Asn (2≤n≤5) moieties have been conducted. However, studies on heavier analogues have been ignored so far due to arduous challenges related to low yields and moderate air stability. Herein, we present the first in-depth study addressing the reactivity of organometallic complexes containing Sb-donor atoms with several AgI salts. These reactions afforded twelve unprecedented aggregates as monomers, dimers as well as three- and four-membered chains of AgI ions claimed in the literature to be inaccessible. Interatomic distances as well as computational evidence obtained with help of several different methods suggest the presence of Ag⋅⋅⋅Ag interactions in all complexes containing more than one AgI ion.

In vivo visualization of enantioselective targeting of amyloid and improvement of cognitive function by clickable chiral metallohelices

The pathogenesis of Alzheimer's disease (AD) is closely related to several contributing factors, especially amyloid-β (Aβ) aggregation. Bioorthogonal reactions provide a general, facile, and robust route for the localization and derivatization of Aβ-targeted agents. Herein, a pair of chiral alkyne-containing metallohelices (ΛA and ΔA) were demonstrated to enantioselectively target and modulate Aβ aggregation, which has been monitored in triple-transgenic AD model mice and proved to improve cognitive function. Compared with its enantiomer ΔA, ΛA performed better in blocking Aβ fibrillation, relieving Aβ-triggered toxicity, and recovering memory deficits in vivo. Moreover, clickable ΛA could act as a functional module for subsequent visualization and versatile modification of amyloid via bioorthogonal reaction. As a proof-of-concept, thioflavin T, tacrine, and magnetic nanoparticles were conjugated with ΛA to realize Aβ photo-oxygenation, acetylcholinesterase inhibition, and Aβ clearance, respectively. This proof-of-principle work provided new insights into the biolabeling and bioconjugation of multifunctional metallosupramolecules through click reactions for AD therapy.

Post-Synthetic Modification of a Porous Hydrocarbon Cage to Give a Discrete Co24 Organometallic Complex

A new alkyne-based hydrocarbon cage was synthesized in high overall yield using alkyne-alkyne coupling in the cage forming step. The cage is porous and displays a moderately high BET surface area (546 m2  g-1 ). The cage loses crystallinity on activation and thus is porous in its amorphous form, while very similar cages have been either non-porous, or retained crystallinity on activation. Reaction of the cage with Co2 (CO)8 results in exhaustive metalation of its 12 alkyne groups to give the Co24 (CO)72 adduct of the cage in good yield.

The first synthesis of an isocyanide-functionalized imidazolium salt and transition metal complexes thereof

An isocyanide-functionalized imidazole was obtained from 4-(1H-imidazol-1-yl)aniline by the Ugi method and subsequently transformed into the corresponding imidazolium salt by treatment with MeI. Coordination of the isocyanide residue allowed the synthesis of several transition metal complexes containing a peripheral imidazolium cation, which are suitable starting materials for the formation of mixed ligand isocyanide-NHC heterometallic complexes.

Synthesis of N-Heterocyclic Carbenes and Their Complexes by Chloronium Ion Abstraction from 2-Chloroazolium Salts Using Electron-Rich Phosphines

N-Heterocyclic carbenes (NHCs) are commonly prepared by deprotonation of azolium salts using strong anionic bases. This reaction is often unselective, yielding alkali metal NHC complexes or dimerized NHCs. Alternatively, free NHCs are obtained by the dechlorination of 2-chloroazolium salts using electron-rich phosphines. PPh3 , PCy3 , and PtBu3 are unsuitable for Cl+ abstraction, while the sterically encumbered tris(1,3-tert-butylimidazolidin-2-ylidenamino)phosphine 1 selectively removes Cl+ from 2-chloroazolium salts. Since bulky 1 does not bind to metal complexes, it was used for the preparation of NHC complexes via in situ Cl+ abstraction from 2-chloroazolium salts. The dechlorination was employed for the site-selective monometallation with IrI , IrIII , RhI , RhIII , and RuII of a bis-NHC precursor composed of a 2-chlorobenzimidazolium and a 2-chlorobenzimidazole group, followed by the preparation of the heterobimetallic IrIII /PdII complex [18](BF4 )2 by a dechlorination/oxidative addition reaction sequence.

A Fluoroponytailed NHC-Silver Complex Formed from Vinylimidazolium/AgNO3 under Aqueous-Ammoniacal Conditions

3-(1H,1H,2H,2H-Perfluorooctyl)-1-vinylimidazolium chloride [2126844-17-3], a strong fluorosurfactant with remarkably high solubility in water, was expediently converted into the respective doubly NHC-complexed silver salt with nitrate as counter ion in quantitative yield. Due to its vinyl substituents, [bis(3-(1H,1H,2H,2H-perfluorooctyl)-1-vinylimidazol-2-ylidene)silver(I)] nitrate, Ag(FNHC)2NO3, represents a polymerizable N-heterocyclic carbene transfer reagent, thus potentially offering simple and robust access to coordination polymers with crosslinking metal bridges. The compound was characterized by infrared and NMR spectroscopy, mass spectrometry as well as elemental analysis, and supplemented by X-ray single-crystal structure determination. It crystallizes in the monoclinic crystal system in the space group P21/c. With 173.3°, the geometry of the Ag-carbene bridge deviates slightly from linearity. The disordered perfluoroalkyl side chains exhibit a helical conformation.

N-heterocyclic carbene-stabilized metal nanoparticles within porous organic cages for catalytic application

Tuning the surface-embellishing ligands of metal nanoparticles (NPs) is a powerful strategy to modulate their morphology and surface electronic and functional features, impacting their catalytic activity and selectivity. In this work, we report the design and synthesis of a polytriazolium organic cage PIC-T, capable of stabilizing PdNPs within its discrete cavity. The obtained material (denoted Pd@PCC-T) is highly durable and monodispersed with narrow particle-size distribution of 2.06 ± 0.02 nm, exhibiting excellent catalytic performance and recyclability in the Sonogashira coupling and tandem reaction to synthesize benzofuran derivatives. Further investigation indicates that the modulation of N-heterocyclic carbene sites embedded in the organic cage has an impact on NPs' catalytic efficiency, thus providing a novel methodology to design superior NP catalysts.

Controllable multiple-step configuration transformations in a thermal/photoinduced reaction

Solid-state photochemical reactions of olefinic compounds have been demonstrated to represent powerful access to organic cyclic molecules with specific configurations. However, the precise control of the stereochemistry in these reactions remains challenging owing to complex and fleeting configuration transformations. Herein, we report a unique approach to control the regiospecific configurations of C = C groups and the intermediates by varying temperatures in multiple-step thermal/photoinduced reactions, thus successfully realizing reversible ring closing/opening changes using a single-crystal coordination polymer platform. All stereochemical transitions are observed by in situ single-crystal X-ray diffraction, powder X-ray diffraction and infrared spectroscopy. Density functional theory calculations allow us to rationalize the mechanism of the synergistic thermal/photoinduced transformations. This approach can be generalized to the analysis of the possible configuration transformations of functional groups and intermediates and unravel the detailed mechanism for any inorganic, organic and macromolecular reactions susceptible to incorporation into single-crystal coordination polymer platforms.

Solid-state photochemical reactions of olefinic compounds provide access to organic cyclic molecules with specific configurations but the precise control of the stereochemistry in these reactions remains challenging. Here, the authors demonstrate control of the regiospecific configurations of C=C groups and the intermediates by varying temperatures in multi-step thermal and photoinduced ring opening and closing reactions using a single-crystal coordination polymer platform.

A Redox-Active Supramolecular Fe4L6 Cage Based on Organic Vertices with Acid-Base-Dependent Charge Tunability for Dehydrogenation Catalysis

Supramolecular cage chemistry is of lasting interest because, as artificial blueprints of natural enzymes, the self-assembled cage structures not only provide substrate-hosting biomimetic environments but also can integrate active sites in the confined nanospaces for function synergism. Herein, we demonstrate a vertex-directed organic-clip chelation assembly strategy to construct a metal-organic cage Fe₄L₆⁸⁺ (MOC-63) incorporating 12 imidazole proton donor-acceptor motifs and four redox-active Fe centers in an octahedral coordination nanospace. Different from regular supramolecular cages assembled with coordination metal vertices, MOC-63 comprises six ditopic organic-clip ligands as vertices and four tris-chelating Fe(N∩N)₃ moieties as faces, thus improving its acid, base, and redox robustness by virtue of cage-stabilized dynamics in solution. Improved dehydrogenation catalysis of 1,2,3,4-tetrahydroquinoline derivatives is accomplished by MOC-63 owing to a supramolecular cage effect that synergizes multiple Fe centers and radical species to expedite intermediate conversion of the multistep reactions in a cage-confined nanospace. The acid-base buffering imidazole motifs play a vital role in modulating the total charge state to resist pH variation and tune the solubility among varied solvents, thereby enhancing reaction acceleration in acidic conditions and rendering a facile recycling catalytic process.