Asymmetric Preparation of Polysubstituted Cyclopropanes Based on Direct Functionalization of Achiral Three-Membered Carbocycles

Dynamic stereomutation of vinylcyclopropanes with metalloradicals

The ever increasing demands for greater sustainability and lower energy usage in chemical processes call for fundamentally new approaches and reactivity principles. In this context, the pronounced prevalence of odd-oxidation states in less precious metals bears untapped potential for fundamentally distinct reactivity modes via metalloradical catalysis1-3. Contrary to the well-established reactivity paradigm that organic free radicals, upon addition to a vinylcyclopropane, lead to rapid ring opening under strain release-a transformation that serves widely as a mechanistic probe (radical clock)4 for the intermediacy of radicals5-we herein show that a metal-based radical, that is, a Ni(I) metalloradical, triggers reversible cis/trans isomerization instead of opening. The isomerization proceeds under chiral inversion and, depending on the substitution pattern, occurs at room temperature in less than 5 min, requiring solely the addition of the non-precious catalyst. Our combined computational and experimental mechanistic studies support metalloradical catalysis as origin of this profound reactivity, rationalize the observed stereoinversion and reveal key reactivity features of the process, including its reversibility. These insights enabled the iterative thermodynamic enrichment of enantiopure cis/trans mixtures towards a single diastereomer through multiple Ni(I) catalysis rounds and also extensions to divinylcyclopropanes, which constitute strategic motifs in natural product- and total syntheses6. While the trans-isomer usually requires heating at approximately 200 °C to trigger thermal isomerization under racemization to cis-divinylcyclopropane, which then undergoes facile Cope-type rearrangement, the analogous contra-thermodynamic process is herein shown to proceed under Ni(I) metalloradical catalysis under mild conditions without any loss of stereochemical integrity, enabling a mild and stereochemically pure access to seven-membered rings, fused ring systems and spirocycles.

An Artificial Enzyme for Asymmetric Nitrocyclopropanation of α,β-Unsaturated Aldehydes-Design and Evolution

The introduction of an abiological catalytic group into the binding pocket of a protein host allows for the expansion of enzyme chemistries. Here, we report the generation of an artificial enzyme by genetic encoding of a non-canonical amino acid that contains a secondary amine side chain. The non-canonical amino acid and the binding pocket function synergistically to catalyze the asymmetric nitrocyclopropanation of α,β-unsaturated aldehydes by the iminium activation mechanism. The designer enzyme was evolved to an optimal variant that catalyzes the reaction at high conversions with high diastereo- and enantioselectivity. This work demonstrates the application of genetic code expansion in enzyme design and expands the scope of enzyme-catalyzed abiological reactions.

Cooperative Photoredox and Cobalt-Catalyzed Acceptorless Dehydrogenative Functionalization of Cyclopropylamides towards Allylic N,O-Acyl-acetal Derivatives

We disclose herein a novel photoredox and cobalt co-catalyzed ring-opening/acceptorless dehydrogenative functionalization of mono-donor cyclopropanes. This sustainable and atom-economic approach allows the rapid assembly of a wide range of allylic N,O-acyl-acetal derivatives. The starting materials are readily available and the reaction features mild conditions, broad substrate scope, and excellent functional group compatibility. The optimized conditions accommodate assorted cycloalkylamides and primary, secondary, and tertiary alcohols, with applications in late-stage functionalization of pharmaceutically relevant compounds, stimulating further utility in medicinal chemistry. Moreover, selective nucleophilic substitutions with various carbon nucleophiles were achieved in a one-pot fashion, offering a reliable avenue to access some cyclic and acyclic derivatives.

Merging of Palladium and Organocatalysis Enabled Asymmetric Decarboxylative (2+1) Cycloadditions toward Cyclopropanes

A cascade reaction enabling enantio- and diastereoselective construction of strained cyclopropanes is described. This asymmetric (2+1) annulation process uses vinyl methylene carbonate and 2-cyanoacrylate as reaction partners in the presence of Pd(PPh3)4 as a precatalyst and an enantioenriched phosphoramidite ligand featuring a morpholine functionality. Mechanistic investigations unveil that the PPh3 derived from the Pd(PPh3)4 and the morpholine-containing phosphoramidite work as cooperative phosphorus and Brønsted base catalysts to promote the reaction.

Nickel-catalyzed γ-alkylation of cyclopropyl ketones with unactivated primary alkyl chlorides: balancing reactivity and selectivity via halide exchange

A novel method was developed for synthesizing γ-alkyl ketones via nickel-catalyzed cross-electrophile coupling of cyclopropyl ketones and non-activated primary alkyl chlorides. High reactivity and selectivity can be achieved with sodium iodide as a crucial cocatalyst that generates a low concentration of alkyl iodide via halide exchange, thus avoiding the formation of alkyl dimers. This reaction possessed excellent regioselectivity and high step economy circumventing in situ or pregenerated organometallics.

Catalytic Enantioselective Primary C-H Borylation for Acyclic All-Carbon Quaternary Stereocenters

Creating a perfect catalyst to operate enzyme-like chiral recognition has been a long-sought aim. A challenging example in this context is constructing acyclic all-carbon quaternary stereogenic centers by transition metal-catalyzed enantioselective C-H activation. We now report highly enantioselective iridium-catalyzed primary C-H borylation of α-all-carbon substituted 2,2-dimethyl amides enabled by a tailor-made chiral bidentate boryl ligand (CBL). The success of the current transformation is attributed to the CBL/iridium catalyst, which has a confined chiral pocket. This protocol provides a diverse array of acyclic all-carbon quaternary stereocenters with excellent enantiocontrol and distinct structural features. Computational study reveals that steric hindrance of CBL could regulate the type of dominant orbital interaction between the catalyst and substrate, which is crucial to conferring high chiral induction.

3-Fluoro-2H-azirine: Generation, Characterization, and Photochemistry

The elusive 3-fluoro-2H-azirine, cyclic NCH2CF, has been generated through the stepwise decomposition of the acryloyl azide CH2CFC(O)N3 in an N2-matrix at 10 K. The characterization of cyclic NCH2CF with matrix-isolation IR spectroscopy is supported by 15N isotope labeling and the calculations with density functional theory (DFT) at the B3LYP/6-311++G(3df,3pd) level of theory. Upon irradiation at 193 nm, cyclic NCH2CF undergoes ring opening by forming the more stable nitrile isomer CH2FCN. In contrast to the photodecomposition reactions, the high-vacuum flash pyrolysis of CH2CFC(O)N3 in the gas phase at 500 °C yields the Curtius rearrangement product CH2CFNCO along with secondary fragmentation to the atmospherically relevant fluorocarbonyl radical (FCO) and cyanomethyl radical (CH2CN). Calculations on the potential energy profile for the decomposition reactions of CH2CFC(O)N3 demonstrate that the excessive energy, arising from the highly exothermic Curtius rearrangement of the azide, plays a key role in driving further dissociation reactions of CH2CFNCO by overcoming the formidable barriers (>50 kcal mol-1) under the pyrolysis conditions.

Bisphospholane Josiphos-type Ligands in Rhodium Asymmetric Catalysis

Asymmetric catalysis has become a universal and powerful method for constructing chiral compounds. In rhodium asymmetric catalysis, bisphospholane Josiphos-type ligands and their rhodium complexes are receiving increasing attention. This review provides comprehensive information on the bisphospholane Josiphos-type ligands in rhodium asymmetric catalysis. The scope of the literature covers from 2013 to now. The application of bisphospholane Josiphos-type ligands in rhodium asymmetric catalysis is summarized as follows: (i) asymmetric addition to C(sp2 )-C(sp2 ) bonds, (ii) asymmetric addition to C(sp2 )-C(sp) bonds of allenes, (iii) asymmetric hydrogenation of C(sp2 )-N bonds, C(sp2 )-O bonds and pyridinium salts, and (iv) asymmetric silanization of C-H and O-H bonds.

Organocatalytic Reductive Amination of the Chiral Formylcyclopropanes: Scope and Applications

We developed a sustainable three-component reductive amination protocol for the chemoselective coupling of optically active functionally rich donor-acceptor carbonyl-cyclopropanes with various amines under 10 mol % of diphenyl phosphate in the presence of Hantzsch ester as a hydride source. The catalytic selective reductive C-N coupling has wide advantages like no epimerization, no ring opening, large substrate scope, generating only mono N-alkylation products and simultaneously resulting in chiral cyclopropane-containing amines possessing many applications in the medicinal chemistry. In this article, we have shown the synthetic applications of reductive C-N coupling reaction to make chiral α-carbonyl-cyclopropane containing amines 8, double C-N coupled cyclopropane-amines 10, unusual C-N/C-C coupled cyclopropane-amines 12, chiral tert-butylsulfinamide containing cyclopropanes 14/15, and functionally rich chiral cyclopropane-fused N-heterocycles 16/18/19. Many of these chiral cyclopropane-amines 5-19 can serve as building blocks for the synthesis of drug-like small molecules, natural products, pharmaceuticals, and their analogues.

Aryl Chloride-Directed Enantioselective C(sp2)-H Borylation Enabled by Iridium Catalysis

We herein report the iridium-catalyzed enantioselective C-H borylation of aryl chlorides. A variety of prochiral biaryl compounds could be well-tolerated, affording a vast array of axially chiral biaryls with high enantioselectivities. The current method exhibits a high turnover number (TON) of 7000, which represents the highest in functional-group-directed asymmetric C-H activation. The high TON was attributed to a weak catalyst-substrate interaction that was caused by mismatched chirality between catalyst and substrate. We also demonstrated the synthetic application of the current method by C-B, ortho-C-H, and C-Cl bond functionalization, including programmed Suzuki-Miyaura coupling for the synthesis of axially chiral polyarenes.

Copper(I)-Catalyzed Asymmetric Hydrophosphination of 3,3-Disubstituted Cyclopropenes

Herein, a copper(I)-catalyzed asymmetric hydrophosphination of 3,3-disubstituted cyclopropenes is reported. It provides a series of phosphine derivatives in high to excellent diastereo- and enantioselectivities. The methodology enjoys broad substrate scope on both 3,3-disubstituted cyclopropenes and diarylphosphines. The high stereoselectivity is attributed to both the high stability of the Cu(I)-(R,R)-QUINOXP* complex in the presence of stoichiometric HPPh2 and the produced phosphines, and the high-performance asymmetric induction of the Cu(I)-(R,R)-QUINOXP* complex. Finally, the method is used for the synthesis of new chiral phosphine-olefin compounds built on a cyclopropane skeleton, one of which serves as a wonderful ligand in Rh-catalyzed asymmetric conjugate addition of phenylboronic acid to various α,β-unsaturated compounds.

Semipinacol Rearrangement of Cyclopropenylcarbinols for the Synthesis of Highly Substituted Cyclopropanes

An electrophile-induced semipinacol rearrangement of cyclopropenylcarbinols is reported. This transformation gives access to various polyfunctionalized cyclopropanes under mild metal-free conditions. The scope of the reaction includes iodine, sulfur and selenium electrophiles, aryl and strained ring migrating groups, and diverse substitution patterns on the cyclopropene. The reaction is particularly efficient for the synthesis of small ring-containing spirocycles, which are important rigid three-dimensional building blocks for medicinal chemistry.

Electrochemical 1,3-Alkyloxylimidation of Arylcyclopropane Radical Cations: Four-Component Access to Imide Derivatives

Herein, a general electrochemical radical-cation-mediated four-component ring-opening 1,3-alkyloxylimidation of arylcyclopropanes, acetonitrile, carboxylic acids, and alcohols is described, providing a facile and sustainable approach to quickly construct structurally diverse imide derivatives from easily available raw materials in an operationally simple undivided cell. This metal-catalyst- and oxidant-free single-electron oxidation strategy offers a green alternative for the formation of highly reactive cyclopropane-derived radical cations, and this protocol features a broad functional group tolerance.

Engaging Isatins and Amino Acids in Multicomponent One-Pot 1,3-Dipolar Cycloaddition Reactions-Easy Access to Structural Diversity

Multicomponent reactions (MCRs) have undoubtedly emerged as the most indispensable tool for organic chemists worldwide, finding extensive utility in the synthesis of intricate natural products, heterocyclic molecules with significant bioactivity, and pharmaceutical agents. The multicomponent one-pot 1,3-dipolar cycloaddition reactions, which were initially conceptualized by Rolf Huisgen in 1960, find extensive application in contemporary heterocyclic chemistry. In terms of green synthesis, the multicomponent 1,3-dipolar cycloaddition is highly favored owing to its numerous advantages, including high step- and atom-economies, remarkable product diversity, as well as excellent efficiency and diastereoselectivity. Among the numerous pieces of research, the most fascinating reaction involves the utilization of azomethine ylides generated from isatins and amino acids that can be captured by various dipolarophiles. This approach offers a highly efficient and convenient method for constructing spiro-pyrrolidine oxindole scaffolds, which are crucial building blocks in biologically active molecules. Consequently, this review delves deeper into the dipolarophiles utilized in the 1,3-dipolar cycloaddition of isatins and amino acids over the past six years.

Late-Stage Aryl C-H Bond Cyclopropenylation with Cyclopropenium Cations

Herein, we disclose the first regio-, site- and chemoselective late-stage (hetero)aryl C-H bond cyclopropenylation with cyclopropenium cations (CPCs). The process is fast, operationally simple and shows an excellent functional group tolerance in densely-functionalized drug molecules, natural products, agrochemicals and fluorescent dyes. Moreover, we discovered that the installation of the cyclopropene ring in drug molecules could not only be used to shield against metabolic instability but also as a synthetic tool to reach medicinally-relevant sp3 -rich scaffolds exploiting the highly-strained nature of the cyclopropene ring with known transformations.

Copper-Phosphido Catalysis: Enantioselective Addition of Phosphines to Cyclopropenes

We describe a copper catalyst that promotes the addition of phosphines to cyclopropenes at ambient temperature. A range of cyclopropylphosphines bearing different steric and electronic properties can now be accessed in high yields and enantioselectivities. Enrichment of phosphorus stereocenters is also demonstrated via a Dynamic Kinetic Asymmetric Transformation (DyKAT) process. A combined experimental and theoretical mechanistic study supports an elementary step featuring insertion of a CuI -phosphido into a carbon-carbon double bond. Density functional theory calculations reveal migratory insertion as the rate- and stereo-determining step, followed by a syn-protodemetalation.

Diastereo- and Enantioselective Hydrophosphination of Cyclopropenes under Lanthanocene Catalysis

The asymmetric hydrophosphination of cyclopropenes with phosphines is of much interest and importance, but has remained hardly explored to date probably because of the lack of suitable catalysts. We report here the diastereo- and enantioselective hydrophosphination of 3,3-disubstituted cyclopropenes with phosphines by a chiral lanthanocene catalyst bearing the C2 -symmetric 5,6-dioxy-4,7-trans-dialkyl-substituted tetrahydroindenyl ligands. This protocol offers a selective and efficient route for the synthesis of a new family of chiral phosphinocyclopropane derivatives, featuring 100 % atom efficiency, good diastereo- and enantioselectivity, broad substrate scope, and no need for a directing group.

Copper-Catalyzed Hydroamination: Enantioselective Addition of Pyrazoles to Cyclopropenes

Chiral N-cyclopropyl pyrazoles and structurally related heterocycles are prepared using an earth-abundant copper catalyst under mild reaction conditions with high regio-, diastereo-, and enantiocontrol. The observed N2:N1 regioselectivity favors the more hindered nitrogen of the pyrazole. Experimental and DFT studies support a unique mechanism that features a five-centered aminocupration.

Metal-catalysed C-C bond formation at cyclopropanes

Cyclopropanes are important substructures in natural products and pharmaceuticals. Although traditional methods for their incorporation rely on cyclopropanation of an existing scaffold, the advent of transition-metal catalysis has enabled installation of functionalized cyclopropanes using cross-coupling reactions. The unique bonding and structural properties of cyclopropane render it more easily functionalized in transition-metal-catalysed cross-couplings than other C(sp³) substrates. The cyclopropane coupling partner can participate in polar cross-coupling reactions either as a nucleophile (organometallic reagents) or as an electrophile (cyclopropyl halides). More recently, single-electron transformations featuring cyclopropyl radicals have emerged. This Review will provide an overview of transition-metal-catalysed C-C bond formation reactions at cyclopropane, covering both traditional and current strategies, and the benefits and limitations of each.

Cascade C-H Activation/Annulation of Sulfoxonium Ylides with Vinyl Cyclopropanes: Access to Cyclopropane-Fused α-Tetralones

Rh-catalyzed weak and traceless directing-group-assisted cascade C-H activation and annulation of sulfoxonium ylides with vinyl cyclopropanes as a coupling partner have been accomplished to furnish functionalized cyclopropane-fused tetralones at moderate temperature. The C-C bond formation, cyclopropanation, functional group tolerance, late-stage diversifications of drug molecules, and scale-up are the important practical features.

Sulfur-Mediated Formal Allylic C-H Cyclopropanation of α-Methylstyrenes

Allylic C-H cyclopropanation of α-methylstyrene and its derivatives was realized through a one-pot two-step sequence, formally converting two aliphatic C-H bonds to C-C bonds with a good yield and high diastereoselectivity, thus providing a quick entry to the synthetically useful vinyl cyclopropane structures.

Simple Ether-Directed Enantioselective C(sp3 )-H Borylation of Cyclopropanes Enabled by Iridium Catalysis

Reported here is an efficient and simple ether-directed iridium-catalyzed enantioselective C(sp³ )-H borylation of cyclopropanes. Various functional groups were well-tolerated, affording a vast array of chiral cyclopropanes with high enantioselectivities. We also demonstrated that the turnover numbers of the current reaction could be up to 335.

Cobalt-Catalyzed Diastereo- and Enantioselective Carbon-Carbon Bond Forming Reactions of Cyclobutenes

Catalytic enantioselective functionalization of cyclobutenes constitutes a general and modular strategy for construction of enantioenriched complex cyclobutanes bearing multiple stereogenic centers, as chiral four-membered rings are common motifs in biologically active molecules and versatile intermediates in organic synthesis. However, enantioselective synthesis of cyclobutanes through such a strategy remained significantly limited. Herein, we report a series of unprecedented cobalt-catalyzed carbon-carbon bond forming reactions of cyclobutenes that are initiated through enantioselective carbometalation. The protocols feature diastereo- and enantioselective introduction of allyl, alkynyl, and functionalized alkyl groups. Mechanistic studies indicated an unusual 1,3-cobalt migration and subsequent β-carbon elimination cascade process occurred in the allyl addition. These new discoveries established a new elementary process for cobalt catalysis and an extension of diversity of nucleophiles for enantioselective transformations of cyclobutenes.

Site- and Stereoselective C(sp3 )-H Borylation of Strained (Hetero)Cycloalkanols Enabled by Iridium Catalysis

Transition metal-catalyzed site- and stereoselective C-H activation of strained (hetero)cycloalkanes remains a formidable challenge. We herein report a carbamate-directed iridium-catalyzed asymmetric β-C(sp³ )-H borylation of cyclopropanol derivatives. A variety of densely functionalized cyclopropanols were obtained in good enantioselectivities via desymmetrization and kinetic resolution. In addition, site-selective C(sp³ )-H borylation of methine groups furnished α-borylated (hetero)cycloalkanols in moderate to good yields. The synthetic utility of the method was further shown in a gram-scale synthesis and diverse downstream transformations of borylated products.

Catalytic Asymmetric Deoxygenative Cyclopropanation Reactions by a Chiral Salen-Mo Catalyst

The catalytic asymmetric cyclopropanation reaction of alkenes with diazo compounds is a direct and powerful method to construct chiral cyclopropanes that are essential to drug discovery. However, diazo compounds are potentially explosive and often require hazardous reagents for their preparation. Here, we report on the use of 1,2-dicarbonyl compounds as safe and readily available surrogates for diazo compounds in the direct catalytic asymmetric deoxygenative cyclopropanation reaction. Enabled by a class of simple and readily accessible chiral salen-Mo catalysts, the reaction proceeded with generally good enantioselectivities and yields toward a wide range of substrates (80 examples). Preliminary mechanistic studies suggested that the proposed μ-oxo bridged dinuclear Mo(III)-species was the catalytically active species. This strategy not only provides a promising route for the synthesis of chiral cyclopropanes but also opens a new window for the potential applications of chiral salen-Mo complexes in asymmetric catalysis.

(Thiolan-2-yl)diphenylmethanol Benzyl Ether-Catalyzed Asymmetric Cyclopropanation of Chalcones

We devised a new method for asymmetric cyclopropanation by employing (S)-(thiolan-2-yl)diphenylmethanol benzyl ether as an organocatalyst. Under optimal conditions, an in situ generated sulfur ylide reacts with (E)-chalcones via a Johnson-Corey-Chaykovsky reaction to afford a variety of cyclopropanes in excellent yields and stereoselectivities. This strategy employs low-environmental-risk reaction conditions and reusable catalysts. Hence, it is a green and efficient method for constructing cyclopropane scaffolds.

A Stereodivergent Approach to the Synthesis of gem-Diborylcyclopropanes

We report a designed stereodivergent strategy for the synthesis of gem-diborylcyclopropanes. The reaction provides a highly modular approach to prepare cyclopropane ring variants bearing gem-(Bpin,Bpin), gem-(Bpin,Bdan), and gem-(Bpin,BF₃ K), with outstanding levels of stereocontrol. This was achieved by diastereoselective Pd-catalyzed cyclopropanation reactions of gem-diborylalkenes with α-diazoarylacetates and α-diazoaryl-trifluoromethyl. The key to the success of this general protocol was the diastereoselective trifluorination reaction of gem-diborylcyclopropanes, followed by the stereospecific interconversion of the trifluoroborate salts into the Bdan group.

Palladium Hydride-Enabled Hydroalkenylation of Strained Molecules

We report the first palladium hydride enabled hydroalkenylation of strained molecules. This new mild protocol proceeds via a regio- and chemoselective hydropalladation step, followed by a photoinduced radical alkyl Heck reaction. This methodology represents a new reactivity mode for strained molecules and opens new avenues for photoinduced palladium catalysis. The reaction is compatible with a wide range of functional groups and can be applied to complex structures, delivering a diverse array of highly valuable and modifiable alkenylated cyclobutanes and cyclopropanes. A hydroalkenylation/diastereoselective rearrangement cascade toward a cyclopentene scaffold has also been demonstrated.

Preparation of Chiral Enantioenriched Densely Substituted Cyclopropyl Azoles, Amines, and Ethers via Formal SN2′ Substitution of Bromocylopropanes

Enantiomerically enriched cyclopropyl ethers, amines, and cyclopropylazole derivatives possessing three stereogenic carbon atoms in a small cycle are obtained via the diastereoselective, formal nucleophilic substitution of chiral, non-racemic bromocyclopropanes. The key feature of this methodology is the utilization of the chiral center of the cyclopropene intermediate, which governs the configuration of the two adjacent stereocenters that are successively installed via 1,4-addition/epimerization sequence.

Regio- and Diastereoselective Carbometalation Reaction of Cyclopropenes

The various facets of the chemistry of cyclopropane derivatives, the smallest carbocycle, are amazingly diverse and continue to fascinate theoreticians, synthetic or structural chemists having interest in fundamental physical, medicinal chemistry, and natural product synthesis. The challenges generated by this intriguing cyclic arrangement of only three tetravalent carbons represent a wide area of the chemical spectrum. From fundamental aspects of bonding through the synthesis of highly strained molecules, the understanding of the mode of action in biological systems to the selective cleavage into acyclic substrates makes the chemistry of these small rings fascinating. Therefore, efficient routes to prepare differently polysubstituted cyclopropanes have always been of a primordial importance. In the past decade, we and others have expanded the scope of the carbometalation reaction of cyclopropenes as a broad and general method to the formation of stereodefined cyclopropane derivatives. Although cyclopropenes, with their even higher strain energy, easily undergo addition reactions of organometallic reagents, their carbometalation reactions generate new regio-, diastereo-, and enantioselectivity issues that needed to be addressed. These various stereochemical aspects accompanied our research from its origins to today, and we are proposing in this Account, a didactic overview of the different ways by which cyclopropenes can lead to the formation of polysubstituted cyclopropanes or open-products possessing several stereogenic centers as a single regio- and diastereomer.We initially launched our research campaign on the chemistry of these strained three-membered rings by the regio- and diastereoselective copper-catalyzed carbomagnesiation of enantiomerically enriched cyclopropenyl carbinols. The directing alcohol governed both the regio- and diastereoselectivity of the addition and also served as a good leaving group as it undergoes a selective 1,2-elimination reaction to provide enantioenriched alkylidenecyclopropanes in excellent yields and enantiomeric excesses. Then, we turned our attention to the regio- and stereoselective synthesis of stereodefined tri- and tetrasubstituted cyclopropanes through the diastereoselective addition to sp²- monosubstituted cyclopropenyl ester derivatives. With the aim to further expand this concept to the formation of penta- and hexa-substituted cyclopropanes as single isomer, we had first to design the preparation of the required 1,2-disubstituted cyclopropenes that would control the regioselective addition of the organometallic derivatives. The synthesis of penta- and hexa-substituted cyclopropanes was then reported for the first time as a single regio- and diastereomer. It should be noted that the in situ formed cyclopropyl-metal intermediate is configurationally stable and can be subsequently functionalized with pure retention of the configuration by addition of electrophiles. Then, the enantioselective-catalyzed carbometalation reaction of achiral cyclopropenes allowed the synthesis of several new classes of cyclopropane derivatives in high enantiomeric ratios. Finally, by combining the regio- and diastereoselective carbometalation reaction of a cyclopropene with a subsequent reaction of the resulting cyclopropylmetal species, a selective carbon-carbon bond cleavage was observed to lead to the preparation of acyclic substrates possessing several stereocenters including a quaternary carbon stereogenic center. Our original vision of using strain within an embedded double bond in a three-membered ring has provided new routes to the stereoselective synthesis of polysubstituted cyclopropanes and has been extremely successful, as it represents a current new tool for the synthesis of persubstituted cyclopropanes as a single diastereomer.

Catalytic Synthesis of Cyclopropenium Cations with Rh-Carbynoids

Herein, we report the first catalytic one-step synthesis of cyclopropenium cations (CPCs) with readily available alkynes and hypervalent iodine reagents as carbyne sources. Key to the process is the catalytic generation of a novel Rh-carbynoid that formally transfers monovalent cationic carbynes (:⁺C-R) to alkynes via an oxidative [2+1] cycloaddition. Our process is able to synthesize a new type of CPC substituted with an ester group that underpins the regioselective attack of a broad range of carbon and heteroatomic nucleophiles, thus providing a new platform for the synthesis of valuable cyclopropenes difficult or not possible to make by current methodologies.

Preparation of Distant Quaternary Carbon Stereocenters by Double Selective Ring-Opening of 1,1-Biscyclopropyl Methanol Derivatives

The diastereoselective double carbometalation reaction of cyclopropenes provides, in a single‐pot operation, two ω‐ene‐[1,1]‐bicyclopropyl ester derivatives. One regioisomer then undergoes a Pd‐catalyzed addition of aryl iodide to provide skipped dienes possessing several distant stereocenters including two congested quaternary carbon centers with excellent diastereoselectivity.

Phosphine-Catalyzed Enantioselective (3+2) Annulation of Vinylcyclopropanes with Imines for the Synthesis of Chiral Pyrrolidines

A phosphine-catalyzed highly enantioselective and diastereoselective (up to 98 % ee and >20 : 1 dr) (3+2) annulation between vinylcyclopropanes and N-tosylaldimines has been developed, which allows facile access to a range of highly functionalized chiral pyrrolidines. Notably, this method makes use of vinylcyclopropanes as a synthon for phosphine-mediated asymmetric annulation reaction, which will offer new opportunities for potential applications of cyclopropanes substrates in phosphine-catalyzed organic transformations.

Copper-Catalyzed Enantioselective Hydrosilylation of gem-Difluorocyclopropenes Leading to a Stereochemical Study of the Silylated gem-Difluorocyclopropanes

Optically active cyclopropanes have been widely investigated especially from the views of pharmaceutical and agrochemical industries, and substituting one of the methylenes with the difluoromethylene unit should be promising for developing novel biologically relevant compounds and functional materials. In this paper, the copper‐catalyzed enantioselective hydrosilylation of gem‐difluorocyclopropenes to provide the corresponding chiral gem‐difluorocyclopropanes is presented. The use of copper(I) chloride, chiral ligands including bidentate BINAPs and monodentate phosphoramidites, and silylborane Me₂PhSi‐Bpin accompanying sodium tert‐butoxide in methanol was appropriate for the enantioselective hydrosilylation of the strained C=C double bond, and the resultant chiral difluorinated three‐membered ring was unambiguously characterized. Subsequent activation of the silyl groups in enantio‐enriched gem‐difluorocyclopropanes showed substantial reduction of the enantiopurity, indicating cleavage of the distal C−C bond leading to the transient acyclic intermediates.

Construction of heterocyclic rings from cyclopropenes

Heterocyclic rings are the fundamental building blocks of biological systems and have wide applications in synthetic chemistry and medicinal science. The development of novel synthetic methodology for heterocyclic skeletons from a variety of starting materials has made great progress in the past decades. Meanwhile, highly strained cyclopropenes as reactive reagents in organic transformations have drawn much attention from chemists. The rich chemical reactivity and reaction routes have been well investigated, and some review articles related to the reactivity of cyclopropenes and the construction of carbocycles and acyclic compounds have appeared in these years. Thus, this review mainly focuses on the progress in the construction of heterocyclic rings starting from various cyclopropenes including the reactions of commonly available stable cyclopropenes, in situ generated reactive cyclopropenes and cyclopropene precursors during this decade. Firstly, the transformations of common cyclopropenes into donor-type vinyl metal carbenes via transition metal induced ring opening, direct metalation of the CC bond of metal complexes, and cycloaddition reactions with 1,3-dipoles are described. Next, the annulation reactions of reactive cyclopropenes generated in situ with donor-acceptor reagents, intramolecular nucleophilic addition, and the cycloaddition reactions with 1,3-dipoles are introduced. Then, the transformation of cyclopropene precursors such as alkyl 1-chloro- or 1-alkoxy-2-aroylcyclopropanecarboxylates into five-membered heteroaromatic compounds is also mentioned. In addition, a brief outlook of the opportunity and challenges in the field of bio-orthogonal reactions related to cyclopropenes is given.

Iridium-Catalyzed Enantioselective C(sp3 )-H Borylation of Aminocyclopropanes

Transition-metal-catalyzed regio- and stereo-controllable C-H functionalization remains a formidable challenge in asymmetric catalysis. Herein, we disclose the first example of iridium-catalyzed C(sp³ )-H borylation of aminocyclopropanes by using simple imides as weakly coordinating directing groups under mild reaction conditions. The reaction proceeded via a six-membered iridacycle, affording a vast range of chiral aminocyclopropyl boronates. The current method features a broad spectrum of functional groups (36 examples) and high enantioselectivities (up to 99 %). We also demonstrated the synthetic utility by a preparative scale C-H borylation, C-B bond transformations, and conversion of the directing group.

Stereospecific Construction of Quaternary Carbon Stereocenters from Quaternary Carbon Stereocenters

Organoaluminum species promote a smooth nucleophilic substitution at the quaternary carbon stereocenter of stereodefined polysubstituted cyclopropyl methyl phosphate with a complete inversion of configuration, even when more reactive functional groups are present. The regio- and diastereoselectivity of the substitution is attributed to the existence of a bicyclobutonium intermediate.

A Green Chemistry Approach toward the Stereospecific Synthesis of Densely Functionalized Cyclopropanes via the Solid-State Photodenitrogenation of Crystalline 1-Pyrazolines

The cyclopropane ring features prominently in active pharmaceuticals, and this has spurred the development of synthetic methodologies that effectively incorporate this highly strained motif into such molecules. As such, elegant solutions to prepare densely functionalized cyclopropanes, particularly ones embedded within the core of complex structures, have become increasingly sought-after. Here we report the stereospecific synthesis of a set of cyclopropanes with vicinal quaternary stereocenters via the solvent-free solid-state photodenitrogenation of crystalline 1-pyrazolines. Density functional theory calculations at the M062X/6-31+G(d,p) level of theory were used to determine the origin of regioselectivity for the synthesis of the 1-pyrazolines; favorable in-phase frontier molecular orbital interactions are responsible for the observation of a single pyrazoline regioisomer. It was also shown that the loss of N₂ may take place via a highly selective solid-state thermal reaction. Scalability of the solid-state photoreaction is enabled through aqueous nanocrystalline suspensions, making this method a "greener" alternative to effectively facilitate the construction of cyclopropane-containing molecular scaffolds.