The Role of Ligands in the Chemical Synthesis and Applications of Inorganic Nanoparticles

Bi-magnetic Mn3O4@Ni core-shell binary superparticles: Self-assembly preparation and magnetic behaviors

Binary superparticles formed by self-assembling two different types of nanoparticles may utilize the synergistic interactions and create advanced multifunctional materials. Bi-magnetic superparticles with a core-shell structure have unique properties due to their specific spatial configurations. Herein, we built Mn3O4@Ni core-shell binary superparticles via an emulsion self-assembly technique. The superparticles are generated with a spherical morphology, and have a typical average size of about 240 nm. By altering the ratio of the two magnetic nanoparticles, the thickness of Ni shells can be adjusted. Oleic acid ligands are crucial for the formation of core-shell structure. Magnetic analysis suggests that core-shell superparticles display dual-phase magnetic interactions, contrasting with the single-phase magnetic behaviors of commonly core-shell magnetic nanoparticles. The calculation on the effective magnetic anisotropy constants indicates that the presence of Ni shell layers reduces the dipole interactions among the Mn3O4 core particles. Due to the presence of Ni nanoparticle shells, the blocking temperature of Mn3O4 is reduced, while the Curie temperature of Mn3O4 is independent on Ni content. Tunable magnetic properties can be achieved by modulating the Ni nanoparticle shell thickness. This study offers insights for the development of core-shell superparticles with varied magnetic characteristics.

Dissolution of EAF slag minerals in aqueous media: Effects of sonication on brownmillerite and gehlenite

The accumulation of electric arc furnace slag (EAFS) in landfills has been causing severe environmental problems. This study examines the dissolution properties of EAFS minerals, including brownmillerite and gehlenite, essential for their possible use in resource recovery. An investigation was conducted to compare the effects of sonication and stirring on mineral dissolution while also assessing the usage of citrate as a complexing agent for gehlenite. Synthetic brownmillerite and gehlenite minerals were dissolved in aqueous solutions at room temperature using a 1:100 g/ml ratio. The dissolved elements were measured using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), while zeta potential and X-ray Photoelectron Spectroscopy (XPS) were used to assess changes in surface chemistry. Brownmillerite had significant dissolution extents, with Al and Ca dissolving up to 16 % and 8 %, respectively, in contrast to gehlenite, which dissolved less than 2 % under similar conditions. Sonication significantly increased the dissolution of brownmillerite by up to 100 %, although its impact on gehlenite dissolution varied depending on the duration of time. Besides, adding citrate enhanced the leaching of Al and Ca from gehlenite by facilitating complexation. XPS data demonstrated differences in elemental ratios on brownmillerite and gehlenite surfaces affected by the method used and the presence of citrate. Lastly, the dissolution extents of Al and Ca from EAFS were up to 12 %, depending on time and mixing method, with a preference for sonication over stirring. In conclusion, this study showed that minerals in EAFS have distinct dissolution characteristics, and sonication and citrate can considerably enhance dissolution.

Ultrathin Flexible Silica Nanosheets with Surface Chemistry-Modulated Affinity to Mammalian Cells

Flexibility of nanomaterials is challenging but worthy to tune for biomedical applications. Biocompatible silica nanomaterials are under extensive exploration but are rarely observed to exhibit flexibility despite the polymeric nature. Herein, a facile one-step route is reported to ultrathin flexible silica nanosheets (NSs), whose low thickness and high diameter-to-thickness ratio enables folding. Thickness and diameter can be readily tuned to enable controlled flexibility. Mechanism study reveals that beyond the commonly used surfactant, the "uncommon" one bearing two hydrophobic tails play a guiding role in producing sheeted/layered/shelled structures, while addition of ethanol appropriately relieved the strong interfacial tension of the assembled surfactants, which will otherwise produce large curled sheeted structures. With these ultrathin NSs, it is further shown that the cellular preference for particle shape and rigidity is highly dependent on surface chemistry of nanoparticles: under high particle-cell affinity, NSs, and especially the flexible ones will be preferred by mammalian cells for internalization or attachment, while this preference is basically invalid when the affinity is low. Therefore, properties of the ultrathin silica NSs can be effectively expanded and empowered by surface chemistry to realize improved bio-sensing or drug delivery.

Experimental Determination of the Chiral and Achiral Shape Diagrams of Tellurium Nanocrystals

The interface between chirality and crystallization and mechanisms by which chirality propagates from crystal structure to overall shapes of crystals are a key topic in crystallography and stereochemistry. Recently, nanocrystals attracted attention as useful model systems for this kind of studies. Specifically, tellurium nanocrystals have been used to address questions on relations between chirality of the crystal structure and that of the overall shape. Previous studies of this system did not offer a comprehensive shape diagram and did not survey all the factors that determine whether shapes that form are chiral or not. In the current report, the distribution of chiral and achiral shapes in this system as a function of different physical and chemical parameters is determined experimentally. It is shown that there is a common logic for formation of chiral shapes, that is, growth at conditions that favor the growth of more reactive nuclei. The experiments also reveal more morphologies than previously encountered, suggesting that a systematic change of conditions in nanocrystal growth is key for identifying morphologies that exist only in a narrow range of conditions.

Atomic-Level Structure of the Organic-Inorganic Interface of Colloidal ZnO Nanoplatelets from Dynamic Nuclear Polarization-Enhanced NMR

Colloidal semiconductor nanoplatelets (NPLs) have emerged as a new class of nanomaterials that can exhibit substantially distinct optical properties compared to those of isotropic quantum dots, which makes them prime candidates for new-generation optoelectronic devices. Insights into the structure and anisotropic growth of NPLs can offer a blueprint for their controlled fabrication. Here, we present an atomic-level investigation of the organic-inorganic interface structure in ultrathin and stable benzamidine (bza)-supported ZnO NPLs prepared by the modified one-pot self-supporting organometallic approach. High-resolution transmission electron microscopy analysis showed a well-faceted hexagonal shape of ZnO NPLs with lateral surfaces terminated by nonpolar (101̅0) facets. The basal surfaces are flat and well-formed on one side and corrugated on the other side, which indicates that the layer-by-layer growth in the thickness of the NPLs likely occurs only in one direction via the expansion of 2D islands on the surface. The ligand coordination modes were elucidated using state-of-the-art dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy supported by density functional theory chemical shift calculations. Specifically, it was found that (101̅0) nonpolar facets are stabilized by neutral L-type bza-H ligands with hydrogen bond-supported η1-coordination mode, while polar (0001) and (0001̅) facets are covered by μ2-coordinated X-type anionic bza ligands with different conformations of aromatic rings. Moreover, the ligand packing on (101̅0) lateral facets was determined using 13C natural abundance (∼1.1%) homonuclear dipolar correlation experiments. Overall, an in-depth understanding of the growth mechanism and the unique bimodal X-type/L-type ligand coordination shell of ZnO NPLs is provided, which will facilitate further design of anisotropic nano-objects.

Predicting Colloidal Interaction Parameters from Small-Angle X-ray Scattering Curves Using Artificial Neural Networks and Markov Chain Monte Carlo Sampling

Small-angle X-ray scattering (SAXS) is a characterization technique that allows for the study of colloidal interactions by fitting the structure factor of the SAXS profile with a selected model and closure relation. However, the applicability of this approach is constrained by the limited number of existing models that can be fitted analytically, as well as the narrow operating range for which the models are valid. In this work, we demonstrate a proof of concept for using an artificial neural network (ANN) trained on SAXS curves obtained from Monte Carlo (MC) simulations to predict values of the effective macroion valency (Z eff) and the Debye length (κ-1) for a given SAXS profile. This ANN, which was trained on 200,000 simulated SAXS curves, was able to predict values of Z eff and κ-1 for a test set containing 25,000 simulated SAXS curves, where most predicted values had errors smaller than 20%. Subsequently, an ANN was used as a surrogate model in a Markov chain Monte Carlo sampling algorithm to obtain maximum a posteriori estimates of Z eff and κ-1, as well as the associated confidence intervals and correlations between Z eff and κ-1 for an experimentally obtained SAXS profile.

Highly Stable Carboranyl Ligated Gold Nano-Catalysts for Regioselective Aromatic Bromination

Achieving electronic/steric control and realizing selectivity regulation in nanocatalysis remains a formidable challenge, as the dynamic nature of metal-ligand interfaces, including dissolution (metal leaching) and structural reconstruction, poses significant obstacles. Herein, we disclose carboranyls (CBs) as unprecedented carbon-bonded functional ligands (Eads.CB-Au(111)=-2.90 eV) for gold nanoparticles (AuNPs), showcasing their exceptional stabilization capability that is attributed by strong Au-C bonds combined with B-H⋅⋅⋅Au interactions. The synthesized CB@AuNPs exhibit core(Aun)-satellite(CB2Au-) structure, showing high stability towards multiple stimuli (110 °C, pH=1-12, thiol etchants). In addition, different from conventional AuNP catalysts such as triphenylphosphine (PPh3) stabilized AuNPs, dissolution of catalytically active gold species was suppressed in CB@AuNPs under the reaction conditions. Leveraging these distinct features, CB@AuNPs realized outstanding p : o selectivities in aromatic bromination. Unbiased arenes including chlorobenzene (up to >30 : 1), bromobenzene (15 : 1) and phenyl acrylate were examined using CB@AuNPs as catalysts to afford highly-selective p-products. Both carboranyl ligands and carboranyl derived counterions are crucial for such regioselective transformation. This work has provided valuable insights for AuNPs in realizing diverse regioselective transformations.

Carboxylic Acid-Assisted Synthesis of Tin(II) Iodide: Key for Stable Large-Area Lead-Free Perovskite Solar Cells

Despite significant progress in tin-based perovskites, the development of stable and high-performance tin-based perovskite solar cells (TPSCs) remains a challenge. In this pursuit, a multitude of strategies have been explored, encompassing the use of reducing agents, antioxidants, bulky cations, and customized solvent systems. We propose an improved approach for synthesizing SnI2 from elemental tin and iodine. Here, we generate tin nanoparticles grafted with a carboxylic acid in situ from tin powder-carboxylic acid-assisted synthesis (CAAS). This methodology not only improves the synthesis process of SnI2 but also enhances precursor stability against oxidation. We use 119Sn MAS NMR to study the atomic-level structure of the resulting FASnI3 thin films and find that the CAAS approach leads to highly pure and unoxidized material. We report remarkable reproducibility in fabricating large-area (1 cm2) flexible TPSCs with significant improvement in open-circuit voltage leading to the champion device showing a power conversion efficiency of 8.35%.

Advances in Nanoparticles as Non-Viral Vectors for Efficient Delivery of CRISPR/Cas9

The clustered regularly interspaced short palindromic repeat (CRISPR)/Cas9 system is a gene-editing technology. Nanoparticle delivery systems have attracted attention because of the limitations of conventional viral vectors. In this review, we assess the efficiency of various nanoparticles, including lipid-based, polymer-based, inorganic, and extracellular vesicle-based systems, as non-viral vectors for CRISPR/Cas9 delivery. We discuss their advantages, limitations, and current challenges. By summarizing recent advancements and highlighting key strategies, this review aims to provide a comprehensive overview of the role of non-viral delivery systems in advancing CRISPR/Cas9 technology for clinical applications and gene therapy.

Influence of Nitrogen-Doped Carbon Dots on H• Radical-Mediated Au-H Formation in the Hydrogenation of 4-Nitrophenol Using NCDs-Au Nanohybrids

The hydrogenation of 4-nitrophenol using carbon dot-stabilized gold (Au) nanoparticles is well-studied, with Au-H species known to catalyze the reaction. However, the impact of specific nitrogen moieties in nitrogen-doped carbon dots on Au-H formation and catalytic activity remains unexplored. These nitrogen species, acting as surface ligands, may influence the catalytic properties through the generation of Au-H species via H• radicals. In this regard, modulation of the catalytic properties of Au nanoparticles has been explored by conjugating their surface with nitrogen-doped carbon dots (NCDs). Three distinct nanohybrid formulations comprising NCDs and Au nanoparticles (i.e., NCDs-Au) have been prepared, where the NCDs were derived from different carbon sources (e.g., citric acid and l-malic acid) and varying mole ratios of the nitrogen source (i.e., urea). The impact of NCDs on Au nanoparticle-mediated catalysis has been investigated using the model reaction of hydrogenation of 4-nitrophenol (4-NP) in the presence of NaBH4. The fractions of different nitrogen species (such as pyrrolic, pyridinic, and amidic) in the different NCDs-Au nanohybrids were quantified through XPS analysis, and their roles in catalytic performance have been studied. Further, the size, shape, crystallinity, defects, and exposed facets of the NCDs-Au nanohybrids have also been assessed (through XRD, HRTEM, and Raman studies), and their structure-activity relationships have been corroborated. The hydrogenation of 4-NP is proposed to happen through the formation of gold-hydride (Au-H) species facilitated by H• radicals, as confirmed by EPR analysis. The NCDs-Au nanohybrid, synthesized from NCDs derived from a 1:3 molar ratio of l-malic acid and urea (MU13-Au), exhibits superior catalytic efficiency with a rate constant of 1.013 min-1, attributed to its abundant defects and a notably high relative content of catalytically favorable pyridinic nitrogen species compared to other tested nanohybrids.

Customizable ligand exchange on the surface of gold nanotriangles enables their application in LSPR-based sensing

Nanomaterials made of noble metals have been actively utilized in sensorics and bioanalytics. Nanoparticles of anisotropic shapes are promising for increasing sensitivity due to the generated hotspots of electron density. Such structures can be effectively manufactured by a relatively accessible colloidal synthesis. However, the shape control requires the attachment of a surfactant on specific crystal facets during their growth. Commonly used cetrimonium halides form a closely packed bilayer, lowering the surface accessibility for subsequent (bio)functionalization steps. While there are numerous studies on functionalizing gold nanospheres, novel materials, such as nanotriangles (AuNTs), often require thorough studies to adapt the existing procedures. This is mainly caused by the incomplete characterization of initial nanoparticle colloids in empirically developed protocols. Herein, we report a rational approach utilizing the surface area of AuNTs as a function of both their dimensions and concentration, determined with an express UV-VIS analysis. We demonstrate its efficiency for the exchange of cetyltrimethylammonium chloride (CTAC) with polystyrene sulfonate (PSS) and with biocompatible citrate using direct and indirect methods, respectively. Fourier-transform infrared spectroscopy unequivocally proves the ligand exchange. Such functionalization allows evaluating the bulk refractive index sensitivity of AuNTs as a measure of their potential in LSPR-based sensing.

Strategies for Making High-Performance Artificial Spider Silk Fibers

Artificial spider silk is an attractive material for many technical applications since it is a biobased fiber that can be produced under ambient conditions but still outcompetes synthetic fibers (e.g., Kevlar) in terms of toughness. Industrial use of this material requires bulk-scale production of recombinant spider silk proteins in heterologous host and replication of the pristine fiber's mechanical properties. High molecular weight spider silk proteins can be spun into fibers with impressive mechanical properties, but the production levels are too low to allow commercialization of the material. Small spider silk proteins, on the other hand, can be produced at yields that are compatible with industrial use, but the mechanical properties of such fibers need to be improved. Here, the literature on wet-spinning of artificial spider silk fibers is summarized and analyzed with a focus on mechanical performance. Furthermore, several strategies for how to improve the properties of such fibers, including optimized protein composition, smarter spinning setups, innovative protein engineering, chemical and physical crosslinking as well as the incorporation of nanomaterials in composite fibers, are outlined and discussed.

Variations in CTAC batches from different suppliers highly affect the shape yield in seed-mediated synthesis of gold nanotriangles

The rapidly developing miniaturization in numerous fields require low-demanding but robust methods of nanomaterial production. Colloidal synthesis provides great flexibility in product material, size, and shape. Gold nanoparticle synthesis has been thoroughly studied, however, recent reports on mechanistic insights of crystal formation have been hindered by the numerous procedures and parameter optimization works. With every new study, scientists fill another blank space on the map of understanding anisotropic growth and find out the critical parameters. In the current work, we highlight the choice importance for surfactant supplier in achieving the gold nanotriangle formation. We systematically study the variation in the shape yield when utilizing five batches of cetyltrimethylammonium chloride (CTAC) from varied suppliers. Using analytical techniques, we search for deviations causing such variation, e.g. different impurity content. We found only a marginal effect of iodine contamination on the studied system, excluding this factor as decisive in contrast to what was proposed earlier in the literature, and leaving the high dependency of the yield to originate from yet unknown reagent characteristics. A deeper understanding of these factors would provide highly effective protocols lowering the reagent consumption and increasing the accessibility of nanomaterials manufactured in a sustainable manner.

Catalytic system having an organotellurium ligand on graphene oxide: immobilization of Pd(0) nanoparticles and application in heterogeneous catalysis of cross-coupling reactions

First heterogeneous catalytic system, having a covalently linked hybrid bidentate organotellurium ligand [i.e., PhTe-CH2-CH2-NH2] on the surface of graphene oxide, has been synthesized with immobilized and stabilized Pd(0) nanoparticles. To the best of our knowledge, it is the first such catalytic system in which a heterogenized organotellurium ligand has been used. It has been well-characterized using different physicochemical characterization techniques viz. P-XRD, XPS, HR-TEM, EELS, FE-SEM, EDX, TGA, BET surface area analysis, FT-IR spectroscopy, and Raman spectroscopy. The Pd content of the final system has been quantified using ICP-OES. Its applications have been explored in Suzuki-Miyaura C-C cross coupling and C-O cross coupling reactions. Hot filtration experiments corroborate the heterogeneous nature of the catalysis. It is recyclable for up to five reaction cycles in Suzuki-Miyaura and C-O cross coupling with marginal loss in performance. It also catalyzes the reactions of chloroarenes such as chlorobenzene, 4-chloroaniline, 1-chloro-4-nitrobenzene, 4-chloroacetophenone, 4-chlorobenzophenone for Suzuki coupling, and 1-chloro-4-nitrobenzene, 4-chlorobenzonitrile, chlorobenzene, and 4-chlorotoluene for C-O coupling. P-XRD, FE-SEM, and EDX study reveals that the catalytic system retains its structural originality and functionality after recycling.

Ligand-Engineered Structural and Physiochemical Properties of 1D Molybdenum-MOFs: A Seldom Explored System for Photocatalytic Applications

As one of the seldom explored systems, molybdenum-based metal-organic frameworks (Mo-MOFs) with different ligands such as terephthalic acid (Mo-TA), 2-aminoterephthalic acid (Mo-ATA), benzenetricarboxylic acid (Mo-BTC), 2-methylimidazole (Mo-2MI), 2-bipyridine (Mo-2bpy), and 4-bipyridine (Mo-4bpy) were developed in this study. X-ray diffraction (XRD), Raman, and attenuated total reflectance-infrared (ATR-IR) analyses confirmed the ligand-dependent crystal structure of the Mo-MOFs along with the characteristic functional groups present in the respective systems. Interestingly, the morphology of all of these the developed Mo-MOFs was found to be a one-dimensional rod-like structure, which was attributed to the binding nature of the ligands onto the growing Mo-frameworks. Optical analysis indicated that all these Mo-MOFs exhibit ultraviolet (UV) light absorption properties with band gap energy in the range of 3.47-3.03 eV. Among the various Mo-MOFs developed, Mo-4bpy MOF degraded a maximum of ∼76 and 62% of malachite green and Congo red dyes, respectively, under sunlight irradiation. The observed improved photocatalytic efficiency of Mo-4bpy MOF was attributed to its appropriate band edge potential, confirmed by Mott-Schottky analysis, improved carrier lifetime (∼34.6 ns) estimated using the time-resolved photoluminescence (TRPL) spectrum, presence of elements with stable oxidation states in the system confirmed by X-ray photoelectron spectroscopy (XPS), improved charge transfer characteristics, and decreased recombination resistance, as confirmed by impedance and PL analyses, respectively. The degradation of Mo-4bpy MOFs mediated by superoxide (•O2-) and hydroxyl radicals (OH•) was further confirmed by scavenger studies. Cyclic studies performed for up to 5 cycles suggested that the degradation efficiency of the Mo-4bpy MOF was stable, attributed to its excellent structural, optical, and morphological features confirmed via postcharacterization of the recycled photocatalyst.

Direct Reductive Amination of HMF to 5-(Aminomethyl)-2-furanmethanol Using Supported Iridium-based Catalysts

In this work, partial reductive amination of 5-hydroxymethylfurfural (HMF) with gaseous ammonia over iridium supported on γ-Al2O3, TiO2, SiO2 and carbon has been studied. The influence of the support and pressure was investigated in the valorization under mild conditions of HMF to 5-(aminomethyl)-2-furanmethanol (AMFM). The catalysts were characterized by TEM, SEM-EDS, N2 sorption Isotherms, TGA, CO-Chemisorption, TPR, XRD, NH3-TPD, ICP-AES and XPS. The maximum activity and high rates were obtained for all catalytic systems. At 50 minutes of the reaction the Ir/C catalyst achieved 93 % of conversion and exhibited the highest yield and selectivity of 92 % and 99 % respectively, to the desired product 5-(aminomethyl)-2-furanmethanol. The main properties that influence activity and selectivity are related to the amount of iridium on the surface and catalyst acidity. After the third cycle, 63 % and 59 % of selectivity and yield to AMFM respectively at 93 % of conversion were obtained.

Heavy-Metal-Free Colloidal Quantum Dots: Progress and Opportunities in Solar Technologies

Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Facile Synthesis of Novel Short-Chain Ligand-Capped Colloidal Metal Oxide Nanoparticles for Printed Flexible Devices

Colloidal metal oxide nanoparticles are key materials for achieving cost-effective and large-scale production of flexible devices, as they enable the formation of functional oxide thin films at low temperatures (<400 °C) through printing techniques such as inkjet printing, gravure coating, and microcontact printing. The conventional solvothermal synthesis of colloidal metal oxide nanoparticles through the thermal decomposition of precursors results in particles with bulky, long-chain ligands on their surfaces, which hinder the formation of dense oxide films when depositing the colloidal metal oxide nanoparticles. Herein, we have developed a simple and versatile method for synthesizing colloidal metal oxide nanoparticles using base-induced hydrolysis and the condensation of metal acetates as precursors. Various binary and ternary colloidal metal oxide nanoparticles (CuO, Mn3O4, Co3O4, CeO2, In2O3, Co1.8Mn1.2O4) were synthesized using short-chain acetate ligands on their surfaces. The thin acetate ligand-containing colloidal Co1.8Mn1.2O4 nanoparticle film exhibited lower resistivity than the same with long-chain oleate ligands. The films coated onto a polyimide substrate formed a flexible negative temperature coefficient thermistor that exhibited the temperature dependence of resistance comparable to bulk materials with a bending durability of up to 5 mm radius. These findings highlight the effectiveness of utilizing colloidal metal oxide nanoparticles with short-chain ligands in flexible devices.

Understanding Flexdispersion: Structure-Function Relationship Studies of Organic Amphiphilic Ligands

Since inorganic nanoparticles have unique properties that differ from those of bulk materials, their material applications have attracted attention in various fields. In order to utilize inorganic nanoparticles for functional materials, they must be dispersed without agglomeration. Therefore, the surfaces of inorganic nanoparticles are typically modified with organic ligands to improve their dispersibility. Nevertheless, the relationship between the tail group structure in organic ligands and the dispersibility of inorganic nanoparticles in organic solvents remains poorly understood. We previously developed amphiphilic ligands that consist of ethylene glycol chains and alkyl chains to disperse inorganic nanoparticles in a variety of organic solvents. However, the structural requirements for amphiphilic ligands to "flexibly" disperse nanoparticles in less polar to polar solvents are still unclear. Here, we designed and synthesized several phosphonic acid ligands for structure-function relationship studies of flexdispersion. Dynamic light scattering analysis and visible light transmittance measurements revealed that the ratio of alkyl/ethylene glycol chains in organic ligands alone does not determine the dispersibility of the nanoparticles in organic solvents, but the arrangement of the individual chains also has an effect. From a practical application standpoint, it is preferable to design ligands with ethylene glycol chains on the outside relative to the particle surface.

From lab to field: Prussian blue frameworks as sustainable cathode materials

Prussian blue and Prussian blue analogues have attracted increasing attention as versatile framework materials with a wide range of applications in catalysis, energy conversion and storage, and biomedical and environmental fields. In terms of energy storage and conversion, Prussian blue-based materials have emerged as suitable candidates of growing interest for the fabrication of batteries and supercapacitors. Their outstanding electrochemical features such as fast charge-discharge rates, high capacity and prolonged cycling life make them favorable for energy storage application. Furthermore, Prussian blue and its analogues as rechargeable battery anodes can advance significantly by the precise control of their structure, morphology, and composition at the nanoscale. Their tunable structural and electronic properties enable the detection of many types of analytes with high sensitivity and specificity, and thus, they are ideal materials for the development of sensors for environmental detection, disease trend monitoring, and industrial safety. Additionally, Prussian blue-based catalysts display excellent photocatalytic performance for the degradation of pollutants and generation of hydrogen. Specifically, their excellent light capturing and charge separation capabilities make them stand out in photocatalytic processes, providing a sustainable option for environmental remediation and renewable energy production. Besides, Prussian blue coatings have been studied particularly for corrosion protection, forming stable and protective layers on metal surfaces, which extend the lifespan of infrastructural materials in harsh environments. Prussian blue and its analogues are highly valuable materials in healthcare fields such as imaging, drug delivery and theranostics because they are biocompatible and their further functionalization is possible. Overall, this review demonstrates that Prussian blue and related framework materials are versatile and capable of addressing many technical challenges in various fields ranging from power generation to healthcare and environmental management.

Multidentate polyoxometalate modification of metal nanoparticles with tunable electronic states

To respond to the increasing demands for practical applications, stabilization and property modulation of metal nanoparticles have emerged as a key research subject. Herein, we present a viable protocol for preparing small metal nanoparticles (<5 nm; Ag, Pd, Pt, and Ru) via multidentate polyoxometalate (POM, [SiW9O34]10-) modification. In addition to enhancing stability, the POMs can modulate the electronic states of metal nanoparticles. Moreover, immobilization of the POM-modified metal nanoparticles on solid supports enables further tuning of the electronic states via a cooperative effect between the POMs and the supports without altering the particle size. Notably, POM-modified Pd nanoparticles on carbon support exhibited superior catalytic activity and selectivity in hydrogenation reactions in comparison with the catalyst without the POM modification.

Supramolecular dye nanoassemblies for advanced diagnostics and therapies

Dyes have conventionally been used in medicine for staining cells, tissues, and organelles. Since these compounds are also known as photosensitizers (PSs) which exhibit photoresponsivity upon photon illumination, there is a high desire towards formulating these molecules into nanoparticles (NPs) to achieve improved delivery efficiency and enhanced stability for novel imaging and therapeutic applications. Furthermore, it has been shown that some of the photophysical properties of these molecules can be altered upon NP formation thereby playing a major role in the outcome of their application. In this review, we primarily focus on introducing dye categories, their formulation strategies and how these strategies affect their photophysical properties in the context of photothermal and non-photothermal applications. More specifically, the most recent progress showing the potential of dye supramolecular assemblies in modalities such as photoacoustic and fluorescence imaging, photothermal and photodynamic therapies as well as their employment in photoablation as a novel modality will be outlined. Aside from their photophysical activity, we delve shortly into the emerging application of dyes as drug stabilizing agents where these molecules are used together with aggregator molecules to form stable nanoparticles.

Supramolecular Self-Assembled Nanostructures Derived from Amplified Structural Isomerism of Zn(II)-Sn(IV)-Zn(II) Porphyrin Triads and Their Visible Light Photocatalytic Degradation of Pollutants

Two structural isomeric porphyrin-based triads (Zn(II)porphyrin-Sn(IV)porphyrin-Zn(II)porphyrin) denoted as T1 and T2 were prepared from the reaction of meso-[5-(4-hydroxyphenyl)-10,15,20-tris(3,5-di-tert-butylphenyl)porphyrinato]zinc(II) (ZnL) with trans-dihydroxo-[5,10-bis(3-pyridyl)-15,20-bis(phenyl)porphyrinato]tin(IV) (SnP1) and trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP2), respectively. All the compounds were characterized using UV-vis spectroscopy, emission spectroscopy, ESI-MS, 1H NMR spectroscopy, and FE-SEM. Most importantly, the two structurally isomeric porphyrin-based triads supramolecularly self-assembled into completely different nanostructures. T1 exhibits a nanosphere morphology, whereas T2 exhibits a nanofiber morphology. The amplified geometric feature in the structural isomeric porphyrin-based triads dictates the physical and chemical properties of the two triads. Both compounds showed the morphology-dependent visible light catalytic photodegradation of rhodamine B dye (74-97% within 90 min) and tetracycline antibiotic (44-71% within 45 min) in water. In both cases, the photodegradation efficiency of T2 was higher than that of T1. The present investigation can significantly contribute to the remediation of wastewater by tuning the conformational changes in porphyrin-based photocatalysts.

Vacancy-Rich SnO2 Quantum Dot Stabilized by Polyoxomolybdate as Electrocatalyst for Selective NH3 Production

The pronounced conductivity of tin dioxide (SnO2) nanoparticles makes it an ideal multifunctional electrode material, while the challenge is to stabilize the quantum dot (QD) SnO2 nanocore in water. An Anderson-type polyoxomolybdate, (NH4)6[Mo7O24], is employed as an inorganic ligand to stabilize a ca. 6 nm SnO2 QD (Mox@SnO2). X-ray scattering and diffraction studies confirm the tetragonal SnO2 nanocore in Mox@SnO2. Elemental analyses are in good agreement with the mass spectrometric detection of the [Mo7O24]6- cluster present in Mox@SnO2. The ionic POMs attached to the SnO2 surface through [Mo-O-Sn] covalent linkages have been established by surface zeta potential, shift of the [Mo = O]t Raman vibration, and extended X-ray absorption fine structure (EXAFS) analyses. The presence of the [Mo7O24]6- cluster in the Mox@SnO2 is responsible for the remarkable aqueous stability of Mox@SnO2 in the pH range of 3-9. Dominant oxygen vacancy in the SnO2 core, identified by EXAFS data and the anisotropic electron paramagnetic resonance (EPR) signals (g ∼ 2.4 and 1.9), results in facile electronic conduction in Mox@SnO2 while being deposited on the electrode surface. Mox@SnO2 acts as an active catalyst for the electrocatalytic nitrate reduction (eNOR) to ammonia with 94% faradaic efficiency (FE) at -0.2 V vs RHE and a yield rate of 28.9 mg h-1 cm-2. The stability of Mox@SnO2 in acidic pH provides scope to reuse the Mox@SnO2 electrode at least four times with notable NH3 selectivity and a superior production rate (239.06 mmol g-1(cat) h-1). This study demonstrates the essential role of POM in stabilizing SnO2 QD, harnessing its electrochemical activity toward electrocatalytic ammonia production.

Universal Click-Chemistry Approach for the DNA Functionalization of Nanoparticles

Nanotechnology has revolutionized the fabrication of hybrid species with tailored functionalities. A milestone in this field is the deoxyribonucleic acid (DNA) conjugation of nanoparticles, introduced almost 30 years ago, which typically exploits the affinity between thiol groups and metallic surfaces. Over the last decades, developments in colloidal research have enabled the synthesis of an assortment of nonmetallic structures, such as high-index dielectric nanoparticles, with unique properties not previously accessible with traditional metallic nanoparticles. However, to stabilize, integrate, and provide further functionality to nonmetallic nanoparticles, reliable techniques for their functionalization with DNA will be crucial. Here, we combine well-established dibenzylcyclooctyne-azide click-chemistry with a simple freeze-thaw method to achieve the functionalization of silica and silicon nanoparticles, which form exceptionally stable colloids with a high DNA surface density of ∼0.2 molecules/nm2. Furthermore, we demonstrate that these functionalized colloids can be self-assembled into high-index dielectric dimers with a yield of over 50% via the use of DNA origami. Finally, we extend this method to functionalize other important nanomaterials, including oxides, polymers, core-shell, and metal nanostructures. Our results indicate that the method presented herein serves as a crucial complement to conventional thiol functionalization chemistry and thus greatly expands the toolbox of DNA-functionalized nanoparticles currently available.

Unveiling Crucial Chemical Processing Parameters Influencing the Performance of Solution-Processed Inorganic Thermoelectric Materials

Production of thermoelectric materials from solution-processed particles involves the synthesis of particles, their purification and densification into pelletized material. Chemical changes that occur during each one of these steps render them performance determining. Particularly the purification steps, bypassed in conventional solid-state synthesis, are the cause for large discrepancies among similar solution-processed materials. In present work, the investigation focuses on a water-based surfactant free solution synthesis of SnSe, a highly relevant thermoelectric material. We show and rationalize that the number of leaching steps, purification solvent, annealing, and annealing atmosphere have significant influence on the Sn : Se ratio and impurity content in the powder. Such compositional changes that are undetectable by conventional characterization techniques lead to distinct consolidated materials with different types and concentration of defects. Additionally, the profound effect on their transport properties is demonstrated. We emphasize that understanding the chemistry and identifying key chemical species and their role throughout the process is paramount for optimizing material performance. Furthermore, we aim to demonstrate the necessity of comprehensive reporting of these steps as a standard practice to ensure material reproducibility.

Efficient, Color-Stable, Pure-Blue Light-Emitting Diodes Based on Aromatic Ligand-Engineered Perovskite Nanoplatelets

Perovskite nanoplatelets (NPLs) show great potential for high-color-purity light-emitting diodes (LEDs) due to their narrow line width and high exciton binding energy. However, the performance of perovskite NPL LEDs lags far behind perovskite quantum dot-/film-based LEDs, owing to their material instability and poor carrier transport. Here, we achieved efficient and stable pure blue-emitting CsPbBr3 NPLs with outstanding optical and electrical properties by using an aromatic ligand, 4-bromothiophene-2-carboxaldehyde (BTC). The BTC ligands with thiophene groups can guide two-dimensional growth and inhibit out-of-plane ripening of CsPbBr3 NPLs, which, meanwhile, increases their structural stability via strongly interacting with PbBr64- octahedra. Moreover, aromatic structures with delocalized π-bonds facilitate charge transport, diminish band tail states, and suppress Auger processes in CsPbBr3 NPLs. Consequently, the LEDs demonstrate efficient and color-stable blue emissions at 465 nm with a narrow emission line width of 17 nm and a maximum external quantum efficiency (EQE) of 5.4%, representing the state-of-the-art CsPbBr3 NPL LEDs.

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

Chitin Nanofibers Enable the Colloidal Dispersion of Carbon Nanomaterials in Aqueous Phase and Hybrid Material Coassembly

Chitin nanofibrils (ChNF) sourced from discarded marine biomass are shown as effective stabilizers of carbon nanomaterials in aqueous media. Such stabilization is evaluated for carbon nanotubes (CNT) considering spatial and temporal perspectives by using experimental (small-angle X-ray scattering, among others) and theoretical (atomistic simulation) approaches. We reveal that the coassembly of ChNF and CNT is governed by hydrophobic interactions, while electrostatic repulsion drives the colloidal stabilization of the hybrid ChNF/CNT system. Related effects are found to be transferable to multiwalled carbon nanotubes and graphene nanosheets. The observations explain the functionality of hybrid membranes obtained by aqueous phase processing, which benefit from an excellent areal mass distribution (correlated to piezoresistivity), also contributing to high electromechanical performance. The water resistance and flexibility of the ChNF/CNT membranes (along with its tensile strength at break of 190 MPa, conductivity of up to 426 S/cm, and piezoresistivity and light absorption properties) are conveniently combined in a device demonstration, a sunlight water evaporator. The latter is shown to present a high evaporation rate (as high as 1.425 kg water m-2 h-1 under one sun illumination) and recyclability.

Leveraging high-throughput screening technologies in targeted mRNA delivery

Messenger ribonucleic acid (mRNA) has emerged as a promising molecular preventive and therapeutic approach that opens new avenues for healthcare. Although the use of delivery systems, especially lipid nanoparticles (LNPs), greatly improves the efficiency and stability of mRNA, mRNA tends to accumulate in the liver and hardly penetrates physiological barriers to reach the target site after intravenous injection. Hence, the rational design of targeting strategies aimed at directing mRNA to specific tissues and cells remains an enormous challenge in mRNA therapy. High-throughput screening (HTS) is a cutting-edge targeted technique capable of synthesizing chemical compound libraries for the large-scale experiments to validate the efficiency of mRNA delivery system. In this review, we firstly provide an overview of conventional low-throughput targeting strategies. Then the latest advancements in HTS techniques for mRNA targeted delivery, encompassing optimizing structures of large-scale delivery vehicles and developing large-scale surface ligands, as well as the applications of HTS techniques in extrahepatic systemic diseases are comprehensively summarized. Moreover, we illustrate the selection of administration routes for targeted mRNA delivery. Finally, challenges in the field and potential solutions to tackle them are proposed, offering insights for future development toward mRNA targeted therapy.

Multiplexable and Scalable Aqueous Synthesis Platform for Oleate-Based, Bilayer-Coated Gold Nanoparticles

Despite gold-based nanomaterials having a unique role in nanomedicine, among other fields, synthesis limitations relating to reaction scale-up and control result in prohibitively high gold nanoparticle costs. In this work, a new preparation procedure for lipid bilayer-coated gold nanoparticles in water is presented, using sodium oleate as reductant and capping agent. The seed-free synthesis not only allows for size precision (8-30 nm) but also remarkable particle concentration (10 mm Au). These reaction efficiencies allow for multiplexing and reaction standardization in 96-well plates using conventional thermocyclers, in addition to simple particle purification via microcentrifugation. Such a multiplexing approach also enables detailed spectroscopic investigation of the nonlinear growth process and dynamic sodium oleate/oleic acid self-assembly. In addition to scalability (at gram-level), resulting gold nanoparticles are stable at physiological pH, in common cell culture media, and are autoclavable. To demonstrate the versatility and applicability of the reported method, a robust ligand exchange with thiolated polyethylene glycol analogues is also presented.

Formulation optimization of lyophilized aptamer-gold nanoparticles: Maintained colloidal stability and cellular uptake

Anti-nucleolin (NCL) aptamer AS1411 is the first anticancer aptamer tested in clinical trials. Gold nanoparticles (AuNP) have been widely exploited for various biomedical applications due to their unique functional properties. In this study, we evaluated the colloidal stability and targeting capacity of AS1411-funtionalized AuNP (AuNP/NCL-Apt) against MCF-7 breast cancer cell line before and after lyophilization. Trehalose, mannitol, and sucrose at various concentrations were evaluated to determine their cryoprotection effects. Our results indicate that sucrose at 10 % (w/v) exhibits the best cryoprotection effect and minimal AuNP/NCL-Apt aggregation as confirmed by UV-Vis spectroscopy and dynamic light scattering (DLS) measurements. Moreover, the lyophilized AuNP/NCL-Apt at optimized formulation maintained its targeting and cytotoxic functionality against MCF-7 cells as proven by the cellular uptake assays utilizing flow cytometry and confocal laser scanning microscopy (CLSM). Quantitative PCR (qPCR) analysis of nucleolin-target gene expression also confirmed the effectiveness of AuNP/NCL-Apt. This study highlights the importance of selecting the proper type and concentration of cryoprotectant in the typical nanoparticle lyophilization process and contributes to our understanding of the physical and biological properties of functionalized nanoparticles upon lyophilization.

Biosynthesis and characterizations of silver nanoparticles by using green banana peel extract: Evaluation of their antibacterial and electrical performances

Biosynthesized silver nanoparticles (Ag NPs) hold tremendous promise in nano-bioscience, with applications spanning engineering, science, and industry. This study delves into their fabrication process, crystallographic characteristics, and nanostructures. Employing green banana peel extract (GBPE), Ag NPs were synthesized. Various analytical techniques, such as UV-Vis absorption spectrophotometry (UV), X-ray diffraction (XRD), Gas chromatography-mass spectrometry (GC-MS), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), and Transmission electron microscopy (TEM) elucidate their attributes. UV-visible analysis reveals a 413 nm absorption band due to surface plasmon resonance. The Ag NPs exhibit a face-centered cubic structure with an average crystallite size of 45.87 nm. Lattice parameters and dislocation density are also determined. When tested against harmful bacteria, such as E. coli and S. epidermidis, advanced microscopy reveals a median size of particles of 55.12 nm and demonstrates their antibacterial characteristics. These environmentally benign Ag NPs also improve the efficiency of bio-electrochemical cells (BECs), opening the door to large-scale manufacturing at a reasonable cost and broadening the range of possible uses.

Thermal Emission Modulation by Electron Population in Quantum Dots

We report an efficient temperature modulation of thermal emissivity near room temperature using quantum dots. The quantum confinement effects result in a unique feature that resembles a quasi-two-level electronic system (QTLES). The QTLES's dielectric function ϵ(ω) is shown to be dependent on the electron population difference δρ(T), which exhibits strong temperature dependence and can be tuned by adjusting the Fermi-level of the solid. Experiments with the Ag_{2}Se quantum dots confirm the theory and showcase a modulate rate dε/dT≈1.5×10^{-3}  K^{-1} that meets the requirements for engineering applications. This study demonstrates an exciting new avenue for temperature modulation of thermal emission and may open up new possibilities for applications like energy harvesting, thermal camouflage, thermal rectifications, and many others.

Encapsulation of Nanoparticles with Statistical Copolymers with Different Surface Charges and Analysis of Their Interactions with Proteins and Cells

Encapsulation with polymers is a well-known strategy to stabilize and functionalize nanomaterials and tune their physicochemical properties. Amphiphilic copolymers are promising in this context, but their structural diversity and complexity also make understanding and predicting their behavior challenging. This is particularly the case in complex media which are relevant for intended applications in medicine and nanobiotechnology. Here, we studied the encapsulation of gold nanoparticles and quantum dots with amphiphilic copolymers differing in their charge and molecular structure. Protein adsorption to the nanoconjugates was studied with fluorescence correlation spectroscopy, and their surface activity was studied with dynamic interfacial tensiometry. Encapsulation of the nanoparticles without affecting their characteristic properties was possible with all tested polymers and provided good stabilization. However, the interaction with proteins and cells significantly depended on structural details. We identified statistical copolymers providing strongly reduced protein adsorption and low unspecific cellular uptake. Interestingly, different zwitterionic amphiphilic copolymers showed substantial differences in their resulting bio-repulsive properties. Among the polymers tested herein, statistical copolymers with sulfobetaine and phosphatidylcholine sidechains performed better than copolymers with carboxylic acid- and dimethylamino-terminated sidechains.

Phenylacetylene-Terminated Poly(Ethylene Glycol) as Ligands for Colloidal Noble Metal Nanoparticles: a New Tool for "Grafting to" Approach

We report a new design of polymer phenylacetylene (PA) ligands and the ligand exchange methodology for colloidal noble metal nanoparticles (NPs). PA-terminated poly(ethylene glycol) (PEG) can bind to metal NPs through acetylide (M-C≡C-R) that affords a high grafting density. The ligand-metal interaction can be switched between σ bonding and extended π backbonding by changing grafting conditions. The σ bonding of PEG-PA with NPs is strong and it can compete with other capping ligands including thiols, while the π backbonding is much weaker. The σ bonding is also demonstrated to improve the catalytic performance of Pd for ethanol oxidation and prevent surface absorption of the reaction intermediates. Those unique binding characteristics will enrich the toolbox in the control of colloidal surface chemistry and their applications using polymer ligands.

Improved Synthesis of Cu2O NPs and Ascorbic Acid-Modified Derivatives for Adsorption of Brilliant Cresyl Blue: Surface and Reusability Studies

This study addresses the critical need for efficient and recyclable photocatalysts for water treatment applications by presenting a novel approach for the synthesis and characterization of copper (I) oxide (Cu2O) nanoparticles modified with ascorbic acid (Cu2O/AA). The motivation for this research stems from the increasing concern about environmental pollution caused by organic pollutants, such as Brilliant Cresyl Blue (BCB), and the necessity for sustainable solutions to mitigate this issue. Through comprehensive characterization techniques including Ultraviolet-Visible spectroscopy (UV-Vis), Fourier Transform Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential measurements, and Brunauer-Emmett-Teller (BET) analysis, we demonstrate a significant modification to the electronic structure, enhancing the photocatalytic activity of Cu2O/AA. BET analysis revealed a mesoporous structure with a specific surface area of 2.7247 m2/g for Cu2O/AA, further emphasizing its potential for enhanced catalytic performance. The photocatalytic degradation studies showcased remarkable efficiency improvements, with degradation coefficients of 30.8% and 73.12% for Cu2O NPs and Cu2O/AA NC, respectively, within a 120 min timeframe. Additionally, recyclability experiments indicated sustained efficiency over five consecutive cycles, with both catalysts retaining crystalline integrity. These findings underscore the promising potential of Cu2O/AA nanoparticles as highly efficient and recyclable photocatalysts for the degradation of organic pollutants, offering superior performance compared to pure Cu2O NPs and addressing the pressing need for sustainable water treatment solutions.

Transformative Dynamics: Self-Assembly of Iron Oxide Hydroxide Nanorods into Iron Oxide Microcubes for Enhanced Perfluoroalkyl Substance Remediation

We report the controlled synthesis of iron oxide microcubes (IOMCs) through the self-assembly arrays of ferric oxide hydroxide nanorods (NRs). The formation of IOMCs involves a complex interplay of nucleation, self-assembly, and growth mechanisms influenced by time, thermal treatment, and surfactant dynamics. The self-assembly of vertically aligned NRs into IOMCs is controlled by dynamic magnetism properties and capping agents like cetyltrimethylammonium bromide (CTAB), whose concentration and temperature modulation dictate growth kinetics and structural uniformity. These controlled structural growths were obtained via a hydrothermal process at 120 °C at various intervals of 8, 16, 24, and 32 h in the presence of CTAB as the capping agent. In this hydrothermal method, the formation of vertically oriented NR arrays was observed without the presence of ligands, binders, harsh drying techniques, and solvent evaporation. The formation of the self-assembly of NRs to IOMCs is obtained with an increase in saturated magnetization to attain the most stable state. The synthesized IOMCs have a uniform size, quasi-shape, and excellent dispersion. Due to its excellent magnetic and catalytic properties, IOMCs were employed to remove the various emerging pollutants known as per- and polyfluorinated substances (PFAS). Various microscopic and spectroscopic techniques were employed for the characterization and interaction studies of IOMCs with various PFAS. The interaction between IOMCs and perfluoroalkyl substances (PFAS) was investigated, revealing strong adsorption tendencies facilitated by electrostatic interactions, as evidenced by UV-vis and FT-IR spectroscopic studies. Furthermore, the higher magnetic and positive surface charge of IOMCs is responsible for an effective remediation eliminating any secondary pollution with ease of recovery after the sorption interaction studies, thereby making it practically worthwhile.

γ-Ray Irradiation Enables Annealing- and Light-Soaking-Free Solution Processable SnO2 Electron Transport Layer for Inverted Organic Solar Cells

The electrode buffer layer is crucial for high-performance and stable OSCs, optimizing charge transport and energy level alignment at the interface between the polymer active layer and electrode. Recently, SnO2 has emerged as a promising material for the cathode buffer layer due to its desirable properties, such as high electron mobility, transparency, and stability. Typically, SnO2 nanoparticle layers require a postannealing treatment above 150°C in an air environment to remove the surfactant ligands and obtain high-quality thin films. However, this poses challenges for flexible electronics as flexible substrates can't tolerate temperatures exceeding 100°C. This study presents solution-processable and annealing-free SnO2 nanoparticles by employing y-ray irradiation to disrupt the bonding between surfactant ligands and SnO2 nanoparticles. The SnO2 layer treated with y-ray irradiation is used as an electron transport layer in OSCs based on PTB7-Th:IEICO-4F. Compared to the conventional SnO2 nanoparticles that required high-temperature annealing, the y-SnO2 nanoparticle-based devices exhibit an 11% comparable efficiency without postannealing at a high temperature. Additionally, y-ray treatment has been observed to eliminate the light-soaking effect of SnO2. By eliminating the high-temperature postannealing and light-soaking effect, y-SnO2 nanoparticles offer a promising, cost-effective solution for future flexible solar cells fabricated using roll-to-roll mass processing.

Molecular-Scale Visualization of Steric Effects of Ligand Binding to Reconstructed Au(111) Surfaces

Direct imaging of single molecules at nanostructured interfaces is a grand challenge with potential to enable new, precise material architectures and technologies. Of particular interest are the structural morphology and spectroscopic signatures of the adsorbed molecule, where modern probes are only now being developed with the necessary spatial and energetic resolution to provide detailed information at the molecule-surface interface. Here, we directly characterize the adsorption of individual m-terphenyl isocyanide ligands on a reconstructed Au(111) surface through scanning tunneling microscopy and inelastic electron tunneling spectroscopy. The site-dependent steric pressure of the various surface features alters the vibrational fingerprints of the m-terphenyl isocyanides, which are characterized with single-molecule precision through joint experimental and theoretical approaches. This study provides molecular-level insights into the steric-pressure-enabled surface binding selectivity as well as its effect on the chemical properties of individual surface-binding ligands.

A mesoporous superparamagnetic iron oxide nanoparticle as a generic drug delivery system for tumor ferroptosis therapy

As a famous drug delivery system (DDS), mesoporous organosilica nanoparticles (MON) are degraded slowly in vivo and the degraded components are not useful for cell nutrition or cancer theranostics, and superparamagnetic iron oxide nanoparticles (SPION) are not mesoporous with low drug loading content (DLC). To overcome the problems of MON and SPION, we developed mesoporous SPIONs (MSPIONs) with an average diameter of 70 nm and pore size of 3.9 nm. Sorafenib (SFN) and/or brequinar (BQR) were loaded into the mesopores of MSPION, generating SFN@MSPION, BQR@MSPION and SFN/BQR@MSPION with high DLC of 11.5% (SFN), 10.1% (BQR) and 10.0% (SNF + BQR), demonstrating that our MSPION is a generic DDS. SFN/BQR@MSPION can be used for high performance ferroptosis therapy of tumors because: (1) the released Fe2+/3+ in tumor microenvironment (TME) can produce •OH via Fenton reaction; (2) the released SFN in TME can inhibit the cystine/glutamate reverse transporter, decrease the intracellular glutathione (GSH) and GSH peroxidase 4 levels, and thus enhance reactive oxygen species and lipid peroxide levels; (3) the released BQR in TME can further enhance the intracellular oxidative stress via dihydroorotate dehydrogenase inhibition. The ferroptosis therapeutic mechanism, efficacy and biosafety of MSPION-based DDS were verified on tumor cells and tumor-bearing mice.

Putting Hybrid Nanomaterials to Work for Biomedical Applications

Hybrid nanomaterials have found use in many biomedical applications. This article provides a comprehensive review of the principles, techniques, and recent advancements in the design and fabrication of hybrid nanomaterials for biomedicine. We begin with an introduction to the general concept of material hybridization, followed by a discussion of how this approach leads to materials with additional functionality and enhanced performance. We then highlight hybrid nanomaterials in the forms of nanostructures, nanocomposites, metal-organic frameworks, and biohybrids, including their fabrication methods. We also showcase the use of hybrid nanomaterials to advance biomedical engineering in the context of nanomedicine, regenerative medicine, diagnostics, theranostics, and biomanufacturing. Finally, we offer perspectives on challenges and opportunities.

Development of masked silica tanning system for sustainable leather production

Amid mounting pressure on the long-term recyclability of chromium in tanned leather and the associated environmental hazards, the quest for an alternative, cleaner tanning system has gained tremendous momentum. In this context, our study explores the remarkable potential of silicates as a versatile platform for skin/hide tanning, circumventing the inherent risks and ecological threats posed by chromium exposure and leaching. We present an alternative approach of using a silica-based tanning system, employing a Taguchi model, to optimize a masked silica (MaSil) tanning product/process for achieving effective collagen stabilization. Our results demonstrate the significant advancements made in hydrothermal denaturation temperature, reaching an impressive 79 °C through precise Taguchi parameters-5% SiO2, masked with 0.3 mole of citrate salt, and a tanning process fixation pH of 4.5. Notably, the mechanical strength analysis reveals compliance with the stringent upper leather recommendation standards, validating the practicality and quality of MaSil crust leather. Moreover, our research highlights the unprecedented environmental benefits of the first reported application of Taguchi's approach to the MaSil tanning system. The developed tanning system remarkably reduces total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and overall water load by 68.4%, 25.4%, 59.5%, and 33.7%, respectively, heralding a promising era of water and environmental sustainability in the leather sector. This study holds the potential to transform leather production, wherein the envisioned future on the use of the Taguchi model and optimized MaSil tanning system could find a place in shaping a cleaner, greener, and more sustainable leather industry.

Probing Protein Corona Formation around Gold Nanoparticles: Effects of Surface Coating

There has been much interest in integrating various inorganic nanoparticles (nanoscale colloids) in biology and medicine. However, buildup of a protein corona around the nanoparticles in biological media, driven by nonspecific interactions, remains a major hurdle for the translation of nanomedicine into clinical applications. In this study, we investigate the interactions between gold nanoparticles and serum proteins using a series of dihydrolipoic acid (DHLA)-based ligands. We employed gel electrophoresis combined with UV-vis absorption and dynamic light scattering to correlate protein adsorption with the nature and size of the ligand used. For instance, we found that AuNPs capped with DHLA alone promote nonspecific protein adsorption. In comparison, capping AuNPs with polyethylene glycol- or zwitterion-appended DHLA essentially prevents corona formation, regardless of ligand charge and size. Our results highlight the crucial role of surface chemistry and core material in protein corona formation and offer valuable information for the design of colloidal nanomaterials for biological applications.

Stable Interfacial Ruthenium Species for Highly Efficient Polyolefin Upcycling

The present polyolefin hydrogenolysis recycling cases acknowledge that zerovalent Ru exhibits high catalytic activity. A pivotal rationale behind this assertion lies in the propensity of the majority of Ru species to undergo reduction to zerovalent Ru within the hydrogenolysis milieu. Nonetheless, the suitability of zerovalent Ru as an optimal structural configuration for accommodating multiple elementary reactions remains ambiguous. Here, we have constructed stable Ru0-Ruδ+ complex species, even under reaction conditions, through surface ligand engineering of commercially available Ru/C catalysts. Our findings unequivocally demonstrate that surface-ligated Ru species can be stabilized in the form of a Ruδ+ state, which, in turn, engenders a perturbation of the σ bond electron distribution within the polyolefin carbon chain, ultimately boosting the rate-determining step of C-C scission. The optimized catalysts reach a solid conversion rate of 609 g·gRu-1·h-1 for polyethylene. This achievement represents a 4.18-fold enhancement relative to the pristine Ru/C catalyst while concurrently preserving a remarkable 94% selectivity toward valued liquid alkanes. Of utmost significance, this surface ligand engineering can be extended to the gentle mixing of catalysts in ligand solution at room temperature, thus rendering it amenable for swift integration into industrial processes involving polyolefin degradation.

Alginic acid-functionalized silver nanoparticles: A rapid monitoring tool for detecting the technology-critical element tellurium

The increasing global demand for tellurium, driven by its critical role in alloys, photovoltaic devices, and electronics, has raised concerns about its environmental pollution and neurotoxicity. In response, the potential of alginic acid (AA), a renewable, low-cost, and sustainable biopolymer, was explored for the biosynthesis of ultra-small silver nanoparticles (AgNPs) and their application in the detection of tellurium (Te(IV)). The effect of key synthesis parameters on desired physicochemical properties and yield of AgNPs was established to ensure high specificity and sensitivity towards Te(IV). The purified AgNPs with AA surface ligands were utilized to demonstrate a ratiometric absorbance sensor that exhibits excellent linearity and nanomolar-level affinity. This approach achieved a high correlation coefficient of ∼ 0.982, with a low detection limit of about 22 nM. Further investigations into the effect of pH, ionic strength, and organic molecules were conducted to elucidate detection performance and molecular understanding. The detection mechanism relies on the coordination between Te(IV) ions and the carboxylate groups of AA, which initiates aggregation-induced plasmon coupling in adjacent AgNPs. The capability of this analytical method to monitor Te(IV) in real-world water samples features its rapidity, user-friendliness, and suitability for point-of-care monitoring, making it a promising alternative to more complex techniques.

Structural characterization of a new samarium-sodium heterometallic coordination polymer

Lanthanide-containing materials are of inter-est in the field of crystal engin-eering because of their unique properties and distinct structure types. In this context, a new samarium-sodium heterometallic coordination polymer, poly[tetra-kis-(μ2-2-formyl-6-meth-oxy-phenolato)samarium(III)sodium(I)], {[SmNa(C8H7O3)4]·solvent}n (Sm-1), was synthesized and crystallized via slow evaporation from a mixture of ethanol and aceto-nitrile. The compound features alternating SmIII and NaI ions, which are linked by ortho-vanillin (o-vanillin) ligands to form a mono-periodic chain-like coordination polymer. The chains propagate along the [001] direction. Residual electron density of disordered solvent mol-ecules in the void space could not be reasonably modeled, thus the SQUEEZE function was applied. The structural, vibrational, and optical properties are reported.

Noble Metal Nanoparticles with Nanogel Coatings: Coinage Metal Thiolate-Stabilized Glutathione Hydrogel Shells

Developing biocompatible nanocoatings is crucial for biomedical applications. Noble metal colloidal nanoparticles with biomolecular shells are thought to combine diverse chemical and optothermal functionalities with biocompatibility. Herein, we present nanoparticles with peptide hydrogel shells that feature an unusual combination of properties: the metal core possesses localized plasmon resonance, whereas a few-nanometer-thick shells open opportunities to employ their soft framework for loading and scaffolding. We demonstrate this concept with gold and silver nanoparticles capped by glutathione peptides stacked into parallel β-sheets as they aggregate on the surface. A key role in the formation of the ordered structure is played by coinage metal(I) thiolates, i.e., Ag(I), Cu(I), and Au(I). The shell thickness can be controlled via the concentration of either metal ions or peptides. Theoretical modeling of the shell's molecular structure suggests that the thiolates have a similar conformation for all the metals and that the parallel β-sheet-like structure is a kinetic product of the peptide aggregation. Using third-order nonlinear two-dimensional infrared spectroscopy, we revealed that the ordered secondary structure is similar to the bulk hydrogels of the coinage metal thiolates of glutathione, which also consist of aggregated stacked parallel β-sheets. We expect that nanoparticles with hydrogel shells will be useful additions to the nanomaterial toolbox. The present method of nanogel coating can be applied to arbitrary surfaces where the initial deposition of the seed glutathione monolayer is possible.

Uncovering the Importance of Ligand Mobility on Cellular Uptake of Nanoparticles: Insights from Experimental, Computational, and Theoretical Investigations

The cellular uptake of nanoparticles (NPs) by biological cells is an important and fundamental process in drug delivery. Previous studies reveal that the physicochemical properties of nanoparticles as well as those of functionalized ligands can both critically affect the uptake behaviors. However, the effect of the conjugation strategy (i.e., the "bond" between the ligand and the NP) on the cellular uptake is overlooked and remains largely elusive. Here, by taking the broadly employed gold nanoparticle as an example, we comprehensively assessed the relationship between the conjugation strategy and uptake behaviors by introducing three ligands with the same functional terminal but different anchoring sites. As revealed by in vitro cell experiments and multiscale molecular simulations, the uptake efficiency of gold NPs was positively correlated with the strength of the "bond" and more specifically the ligand mobility on the NP surface. Moreover, we validated the results presented above by proposing a thermodynamic theory for the wrapping of NPs with mobile ligands. Further, we also showed that the endocytic pathway of NPs was highly dependent on ligand mobility. Overall, this study uncovered a vital role of conjugation strategy in the cellular uptake and may provide useful guidelines for tailoring the biobehaviors of nanoparticles.