Single Molecule Photocatalysis on TiO2 Surfaces

Donor-acceptor type triphenylamine-based porous aromatic frameworks (TPA-PAFs) for photosynthesis of benzimidazoles

The development of efficient and recyclable photocatalysts for organic synthesis is of great interest. This study presents the synthesis of triphenylamine-based porous aromatic frameworks (TPA-PAFs) in an alternating donor-acceptor (D-A) manner. The light absorption range and the optical band gaps of TPA-PAFs are effectively tuned by changing the electron acceptor units, which further determine their photocatalytic properties. As a result, TPA-PAFs exhibit excellent catalytic performance for the photosynthesis of benzimidazoles in high yields (up to 99%), broad substrate scope (18 examples), and good recyclability (up to 10 cycles). This work provides a feasible approach toward the facile design and synthesis of efficient and stable PAF-based photocatalysts, which further broadens the application of PAFs catalytic materials in photocatalytic organic synthesis.

Direct Photocatalytic Methane Oxidation to Formaldehyde by N Doping Co-Decorated Mixed Crystal TiO2

In this paper, N-doped TiO2 mixed crystals are prepared via direct calcination of TiN for highly selective oxidation of CH4 to HCHO at room temperature. The structures of the prepared TiO2 samples are characterized to be N-doped TiO2 of anatase and rutile mixed crystals. The crystal structures of TiO2 samples are determined by XRD spectra and Raman spectra, while N doping is demonstrated by TEM mapping, ONH inorganic element analysis, and high-resolution XPS results. Significantly, the production rate of HCHO is as high as 23.5 mmol·g-1·h-1 with a selectivity over 90%. Mechanism studies reveal that H2O is the main oxygen source and acts through the formation of ·OH. DFT calculations indicate that the construction of a mixed crystal structure and N-doping modification mainly act by increasing the adsorption capacity of H2O. An efficient photocatalyst was prepared by us to convert CH4 to HCHO with high yield and selectivity, greatly promoting the development of the photocatalytic CH4 conversion study.

Heterogeneous CuS QDs/BiVO4@Y2O2S Nanoreactor for Monitorable Photocatalysis

Exploration of multifunctional integrated catalysts is of great significance for photocatalysis toward practical application. Herein, a 1D confined nanoreactor with a heterogeneous core-shell structure is designed for synergies of efficient catalysis and temperature monitoring by custom encapsulation of Z-scheme heterojunction CuS quantum dots/BiVO4 (CuS QDs/BiVO4) and Y2O2S-Er, Yb. The dispersed active sites created by the QDs with high surface energy improve the mass transfer efficiency, and the efficient electron transport channels at the heterogeneous interface extend the carrier lifetime, which endows the nanoreactor with excellent catalytic performance. Meanwhile, real-time temperature monitoring is realized based on the thermally coupled levels 2H11/2/4S3/2→4I15/2 of Er3+ using fluorescence intensity ratio, which enables the monitorable photocatalysis. Furthermore, the nanoreactor with a multidimensional structure increases effective intermolecular collisions to facilitate the catalytic process by restricting the reaction within distinct enclosed spaces and circumvents potential unknown interaction effects. The design of multi-space nanoconfined reactors opens up a new avenue to modulate catalyst function, providing a unique perspective for photocatalytic applications in the mineralization of organic pollutants, hydrogen production, and nitrogen fixation.

Activating nickel foam with trace titanium oxide for enhanced water oxidation

Nickel-based electrocatalysts for water oxidation suffer from low activity and poor stability. In this work, 0.015 mg cm-2 TiO2 nanosheets anchored on Ni foam addressed these problems after electrochemical activation. In situ investigations, including Raman spectra, corroborated the enhanced generation of highly active Ni(III)-O-O species on Ni foam in the presence of trace TiO2.

Site-Selective Excitation of Ti3+ Ions in Rutile TiO2 via Anisotropic Intra-Atomic 3d → 3d Transition

Site-selective excitation (SSE), which is usually realized by tuning the wavelength of absorbed light, is an ideal way to study bond-selective chemistry, analyze the crystal structure, investigate protein conformation, etc., eventually leading to active manipulation of desired processes. Herein, SSE has been explored in (110)-, (100)-, and (011)-faced rutile TiO2, a prototypical material in both surface science and photocatalysis fields. Using ultraviolet photoelectron spectroscopy and photon energy-, substrate orientation-, and laser polarization-dependent two-photon photoemission spectroscopy (2PPE), intra-atomic 3d → 3d transition from the split Ti3+ 3d orbitals, i.e., band gap states and excited states at ∼1.00 eV below and ∼2.40 eV above the Fermi level, respectively, has been proven for all of the samples, suggesting that it is a common property of this material. The distinct structure of rutile TiO2 results in the anisotropic 3d → 3d transitions with the transition dipole moment along the long axes ([110] and [11̅0]) of TiO6 blocking units. This anisotropy facilitates the selective excitation of Ti3+ ions in the two types of TiO6, which cannot be realized by conventional wavelength tuning, via polarization alignment of the excitation source. Discovery in this work builds the foundation for future investigation of site-selective photophysical and photochemical processes and eventually possible active manipulation in this material at the atomic level.

Ultrafast Surface-Specific Spectroscopy of Water at a Photoexcited TiO2 Model Water-Splitting Photocatalyst

A critical step in photocatalytic water dissociation is the hole-mediated oxidation reaction. Molecular-level insights into the mechanism of this complex reaction under realistic conditions with high temporal resolution are highly desirable. Here, we use femtosecond time-resolved, surface-specific vibrational sum frequency generation spectroscopy to study the photo-induced reaction directly at the interface of the photocatalyst TiO2 in contact with liquid water at room temperature. Thanks to the inherent surface specificity of the spectroscopic method, we can follow the reaction of solely the interfacial water molecules directly at the interface at timescales on which the reaction takes place. Following the generation of holes at the surface immediately after photoexcitation of the catalyst with UV light, water dissociation occurs on a sub-20 ps timescale. The reaction mechanism is similar at pH 3 and 11. In both cases, we observe the conversion of H2 O into Ti-OH groups and the deprotonation of pre-existing Ti-OH groups. This study provides unique experimental insights into the early steps of the photo-induced dissociation processes at the photocatalyst-water interface, relevant to the design of improved photocatalysts.

Near-Infrared Chiroptical Activity Titanium Dioxide Supraparticles with Circularly Polarized Light Induced Antibacterial Activity

Titanium dioxide (TiO2) has attracted significant attention in the fields of antibacterial activity and pollutant degradation due to its well-known photocatalytic properties. However, the application of TiO2 is significantly limited by its large band gap width, which only allows excitation by ultraviolet light below 400 nm. Here, we propose the use of surface chiral functionalization of TiO2 to tune its band gap width, thus enabling it to be excited by near-infrared-region light (NIR), resulting in the effective separation of electron-hole pairs. By controlling the solvent polarity and forming numerous weak interactions (such as hydrogen bonding) between chiral ligands and TiO2, we successfully prepared chiral TiO2 superparticles (SPs) that exhibited a broad circular dichroism (CD) absorption at 792 nm. Under circularly polarized light (CPL) at 808 nm, the chiral SPs induced the separation of electron-hole pairs in TiO2, thus generating hydroxyl and singlet oxygen radicals. Antibacterial tests under CPL in NIR showed that the chiral TiO2 SPs exhibited excellent antibacterial performance, with inhibition rates of 99.4% and 100% against Gram-positive and Gram-negative bacteria, respectively. Recycling-reuse experiments and biocompatibility evaluation of the material demonstrated that the chiral TiO2 SPs are stable and safe antibacterial materials, thus indicating the potential application of chiral TiO2 SPs in antibacterial aspects of medical implants.

The role of halogens in Au-S bond cleavage for energy-differentiated catalysis at the single-bond limit

The transformation from one compound to another involves the breaking and formation of chemical bonds at the single-bond level, especially during catalytic reactions that are of great significance in broad fields such as energy conversion, environmental science, life science and chemical synthesis. The study of the reaction process at the single-bond limit is the key to understanding the catalytic reaction mechanism and further rationally designing catalysts. Here, we develop a method to monitor the catalytic process from the perspective of the single-bond energy using high-resolution scanning tunneling microscopy single-molecule junctions. Experimental and theoretical studies consistently reveal that the attack of a halogen atom on an Au atom can reduce the breaking energy of Au-S bonds, thereby accelerating the bond cleavage reaction and shortening the plateau length during the single-molecule junction breaking. Furthermore, the distinction in catalytic activity between different halogen atoms can be compared as well. This study establishes the intrinsic relationship among the reaction activation energy, the chemical bond breaking energy and the single-molecule junction breaking process, strengthening our mastery of catalytic reactions towards precise chemistry.

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

Photoredox catalysis plays a crucial role in contemporary synthetic organic chemistry. Since the groundbreaking work of Shang and Fu on photocatalytic decarboxylative alkylations in 2019, a wide range of organic transformations, such as alkylation, alkenylation, cyclization, amination, iodination, and monofluoromethylation, have been progressively achieved using a combination of iodide and PPh3. In this review, we primarily focus on summarizing the recent advancements in inexpensive and readily available iodide/phosphine-mediated photoredox radical transformations.

Mechanistic insight on water dissociation on pristine low-index TiO2 surfaces from machine learning molecular dynamics simulations

Water adsorption and dissociation processes on pristine low-index TiO2 interfaces are important but poorly understood outside the well-studied anatase (101) and rutile (110). To understand these, we construct three sets of machine learning potentials that are simultaneously applicable to various TiO2 surfaces, based on three density-functional-theory approximations. Here we show the water dissociation free energies on seven pristine TiO2 surfaces, and predict that anatase (100), anatase (110), rutile (001), and rutile (011) favor water dissociation, anatase (101) and rutile (100) have mostly molecular adsorption, while the simulations of rutile (110) sensitively depend on the slab thickness and molecular adsorption is preferred with thick slabs. Moreover, using an automated algorithm, we reveal that these surfaces follow different types of atomistic mechanisms for proton transfer and water dissociation: one-step, two-step, or both. These mechanisms can be rationalized based on the arrangements of water molecules on the different surfaces. Our finding thus demonstrates that the different pristine TiO2 surfaces react with water in distinct ways, and cannot be represented using just the low-energy anatase (101) and rutile (110) surfaces.

Bottom-Up Photosynthesis of an Air-Stable Radical Semiconductor Showing Photoconductivity to Full Solar Spectrum and X-Ray

Single-component semiconductors with photoresponse to full solar spectrum are highly desirable to simplify the device structure of commercial photodetectors and to improve solar conversion or photocatalytic efficiency but remain scarce. This work reports bottom-up photosynthesis of an air-stable radical semiconductor using BiI3 and a photochromism-active benzidine derivative as a photosensitive functional motif. This semiconductor shows photoconductivity to full solar spectrum contributed by radical and non-radical forms of the benzidine derivative. It has also the potential to detect X-rays because of strong X-ray absorption coefficient. This finding opens up a new synthetic method for radical semiconductors and may find applications on extending photoresponsive ranges of perovskites, transition metal sulfides, and other materials.

Comparison of H2O Adsorption and Dissociation Behaviors on Rutile (110) and Anatase (101) Surfaces Based on ReaxFF Molecular Dynamics Simulation

The relationship between structure and reactivity plays a dominant role in water dissociation on the various TiO2 crystallines. To observe the adsorption and dissociation behavior of H2O, the reaction force field (ReaxFF) is used to investigate the dynamic behavior of H2O on rutile (110) and anatase (101) surfaces in an aqueous environment. Simulation results show that there is a direct proton transfer between the adsorbed H2O (H2Oad) and the bridging oxygen (Obr) on the rutile (110) surface. Compared with that on the rutile (110) surface, an indirect proton transfer occurs on the anatase (101) surface along the H-bond network from the second layer of water. This different mechanism of water dissociation is determined by the distance between the 5-fold coordinated Ti (Ti5c) and Obr of the rutile and anatase TiO2 surfaces, resulting in the direct or indirect proton transfer. Additionally, the hydrogen bond (H-bond) network plays a crucial role in the adsorption and dissociation of H2O on the TiO2 surface. To describe interfacial water structures between TiO2 and bulk water, the double-layer model is proposed. The first layer is the dissociated H2O on the rutile (110) and anatase (101) surfaces. The second layer forms an ordered water structure adsorbed to the surface Obr or terminal OH group through strong hydrogen bonding (H-bonding). Affected by the H-bond network, the H2O dissociation on the rutile (110) surface is inhibited but that on the anatase (101) surface is promoted.

Synthesis and up-to-date applications of 2D microporous g-C3N4 nanomaterials for sustainable development

In recent years, with the development of industrial technology and the increase of people's environmental awareness, the research on sustainable materials and their applications has become a hot topic. Among two-dimensional (2D) materials that have been selected for sustainable research, graphitic phase carbon nitride (g-C3N4) has become a hot research topic because of its many outstanding advantages such as simple preparation, good electrochemical properties, excellent photochemical properties, and better thermal stability. Nevertheless, the inherent limitations of g-C3N4 due to its relatively poor specific surface area, rapid charge recombination, limited light absorption range, and inferior dispersion in aqueous and organic media have limited its practical application. In the review, we summarize and analyze the unique structure of the 2D microporous nanomaterial g-C3N4, its synthesis method, chemical modification method, and the latest application examples in various fields in recent years, highlighting its advantages and shortcomings, with a view to providing ideas for overcoming the difficulties in its application. Furthermore, the pressing challenges faced by g-C3N4 are briefly discussed, as well as an outlook on the application prospects of g-C3N4 materials. It is expected that the review in this paper will provide more theoretical strategies for the future practical application of g-C3N4-based materials, as well as contributing to nanomaterials in sustainable applications.

Recent Progress in Multifunctional Graphene-Based Nanocomposites for Photocatalysis and Electrocatalysis Application

The global energy shortage and environmental degradation are two major issues of concern in today's society. The production of renewable energy and the treatment of pollutants are currently the mainstream research directions in the field of photocatalysis. In addition, over the last decade or so, graphene (GR) has been widely used in photocatalysis due to its unique physical and chemical properties, such as its large light-absorption range, high adsorption capacity, large specific surface area, and excellent electronic conductivity. Here, we first introduce the unique properties of graphene, such as its high specific surface area, chemical stability, etc. Then, the basic principles of photocatalytic hydrolysis, pollutant degradation, and the photocatalytic reduction of CO₂ are summarized. We then give an overview of the optimization strategies for graphene-based photocatalysis and the latest advances in its application. Finally, we present challenges and perspectives for graphene-based applications in this field in light of recent developments.

Heterogeneous V2O5/TiO2-Mediated Photocatalytic Reduction of Nitro Compounds to the Corresponding Amines under Visible Light

The hydrogenation of nitro compounds to their corresponding amines is developed using a heterogeneous and recyclable catalyst (V₂O₅/TiO₂) under irradiation of blue LED (9 W) at ambient temperature. Hydrazine hydrate is used as a reductant and ethanol is used as a solvent, facilitating green, sustainable, low-cost production. The synthesis of 32 (hetero)arylamines and their pharmaceutically relevant molecules (five) are described. Significant features of the protocol include catalyst recyclability, green solvent, ambient temperature, and gram-scale reactions. Among the other aspects studied are ¹H-NMR-assisted reaction progress monitoring, control experiments for mechanistic studies, protocol applications, and recyclability studies. Furthermore, the developed protocol enabled wide functional group tolerance, chemo-selectivity, high yield, and low-cost, sustainable, and environmentally benign synthesis.

Preparation of chitosan/retinoic acid @ nanocapsules/TiO2 self-cleaning one-dimensional photonic crystals and the study of the visual detection of acute promyelocytic leukemia

Sample exposure to air during optical detection leads to the widespread dispersal of microorganisms in the air, posing a health threat to patients and healthcare workers and potentially causing numerous nosocomial infections. In this study, a TiO₂/CS-nanocapsules-Va visualization sensor was developed by alternatively spin-coating TiO₂, CS and nanocapsules-Va. The uniformly distributed TiO₂ can endow the visualization sensor with good photocatalytic performance, and the nanocapsules-Va can bind specifically to the antigen and change its volume. The research results showed that the visualization sensor cannot only detect acute promyelocytic leukemia conveniently, quickly and accurately, but also kill bacteria, decompose organic residues in blood samples under the influence of sunlight, and have an extensive application prospect in substance detection and disease diagnosis.

Surface Engineering of TiO2 Nanosheets to Boost Photocatalytic Methanol Dehydrogenation for Hydrogen Evolution

Low-cost high-efficiency H₂ evolution is indispensable for its large-scale applications in the future. In the research, we expect to build high active photocatalysts for sunlight-driven H₂ production by surface engineering to adjust the work function of photocatalyst surfaces, adsorption/desorption ability of substrates and products, and reaction activation energy barrier. Single-atom Pt-doped TiO_2-x nanosheets (NSs), mainly including two facets of (001) and (101), with loading of Pt nanoparticles (NPs) at their edges (Pt/TiO_2-x-SAP) are successfully prepared by an oxygen vacancy-engaged synthetic strategy. According to the theoretical simulation, the implanted single-atom Pt can change the surface work function of TiO₂, which benefits electron transfer, and electrons tend to gather at Pt NPs adsorbed at (101) facet-related edges of TiO₂ NSs for H₂ evolution. Pt/TiO_2-x-SAP exhibits ultrahigh photocatalytic performance of hydrogen evolution from dry methanol with a quantum yield of 90.8% that is ∼1385 times higher than pure TiO_2-x NSs upon 365 nm light irradiation. The high H₂ generation rate (607 mmol g_cata^-1 h^-1) of Pt/TiO_2-x-SAP is the basis for its potential applications in the transportation field with irradiation of UV-visible light (100 mW cm^-2). Finally, lower adsorption energy for HCHO on Ti sites originated from TiO₂ (001) doping single-atom Pt is responsible for high selective dehydrogenation of methanol to HCHO, and H tends to favorably gather at Pt NPs on the TiO₂ (101) surface to produce H₂.

Phase Change Thermal Storage Materials for Interdisciplinary Applications

Functional phase change materials (PCMs) capable of reversibly storing and releasing tremendous thermal energy during the isothermal phase change process have recently received tremendous attention in interdisciplinary applications. The smart integration of PCMs with functional supporting materials enables multiple cutting-edge interdisciplinary applications, including optical, electrical, magnetic, acoustic, medical, mechanical, and catalytic disciplines etc. Herein, we systematically discuss thermal storage mechanism, thermal transfer mechanism, and energy conversion mechanism, and summarize the state-of-the-art advances in interdisciplinary applications of PCMs. In particular, the applications of PCMs in acoustic, mechanical, and catalytic disciplines are still in their infancy. Simultaneously, in-depth insights into the correlations between microscopic structures and thermophysical properties of composite PCMs are revealed. Finally, current challenges and future prospects are also highlighted according to the up-to-date interdisciplinary applications of PCMs. This review aims to arouse broad research interest in the interdisciplinary community and provide constructive references for exploring next generation advanced multifunctional PCMs for interdisciplinary applications, thereby facilitating their major breakthroughs in both fundamental researches and commercial applications.

Cerium Synchronous Doping in Anatase for Enhanced Photocatalytic Hydrogen Production from Ethanol-Water Mixtures

Cerium element with a unique electric structure can be used to modify semiconductor photocatalysts to enhance their photocatalytic performances. In this work, Ce-doped TiO₂ (Ce/TiO₂) was successfully achieved using the sol-gel method. The structural characterization methods confirm that Ce was doped in the lattice of anatase TiO₂, which led to a smaller grain size. The performance test results show that the Ce doped in anatase TiO₂ significantly enhances the charge transport efficiency and broadens the light absorption range, resulting in higher photocatalytic performance. The Ce/TiO₂ exhibited a photocurrent density of 10.9 μA/cm² at 1.0 V vs. Ag/AgCl, 2.5 times higher than that of pure TiO₂ (4.3 μA/cm²) under AM 1.5 G light. The hydrogen (H₂) production rate of the Ce/TiO₂ was approximately 0.33 μmol/h/g, which is more than twice as much as that of the pure anatase TiO₂ (0.12 μmol/h/g). This work demonstrates the effect of Ce doping in the lattice of TiO₂ for enhanced photocatalytic hydrogen production.

Selective adsorption of cysteamine molecules on Au/TiO2 boosts visible light-driven photocatalytic hydrogen evolution

Photocatalytic evolution of hydrogen is becoming a research hotspot because it can help to produce clean energy and reduce environmental pollution. Titanium dioxide (TiO₂) and its composites are photocatalysts that are widely used in hydrogen evolution because of their high abundance in nature, low price, and high photo/chemical stability. However, their catalytic performances still need to be further improved, particularly in the visible light spectrum. Herein, visible light-driven photocatalytic evolution of hydrogen on Au/TiO₂ nanocomposite is enhanced ∼ 10 folds by selectively functionalizing the nanocomposite with cysteamine molecules. It is revealed that the amine group (-NH₂) in cysteamine favors the transfer and separation of photo-generated hot carriers. The rate of hydrogen produced can be further tuned by varying the ionization of the functionalized molecules at different pH values. This work provides a simple, convenient, and effective method that can be used to improve the photocatalytic evolution of hydrogen. This method can also be used for many other nanocatalysts (e.g., Au-MoS₂, Au-BiVO₄) and catalytic reactions (e.g., carbon dioxide reduction, nitrogen reduction).

The effect of dissolved chlorides on the photocatalytic degradation properties of titania in wastewater treatment

We investigate the effect of chlorides on the photocatalytic degradation of phenol by titania polymorphs (anatase and rutile). We demonstrate how solubilised chlorides can affect the hydroxyl radical formation on both polymorphs with an overall effect on their photodegradative activity. Initially, the photocatalytic activity of anatase and rutile for phenol degradation is investigated in both standard water and brines. With anatase, a significant reduction of the phenol conversion rate is observed (from a pseudo-first-order rate constant k = 5.3 × 10^-3 min^-1 to k = 3.5 × 10^-3 min^-1). In contrast, the presence of solubilised chlorides results in enhancement of rutile activity under the same reaction conditions (from 2.3 × 10^-3 min^-1 to 4.8 × 10^-3 min^-1). Periodic DFT methods are extensively employed and we show that after the generation of charge separation in the modelled titania systems, adsorbed chlorides are the preferential site for partial hole localisation, although small energy differences are computed between partially localised hole densities over adsorbed chloride or hydroxyl. Moreover, chlorides can reduce or inhibit the ability of r-TiO₂ (110) and a-TiO₂ (101) systems to localise polarons in the slab structure. These results indicate that both mechanisms - hole scavenging and the inhibition of hole localisation - can be the origin of the effect of chlorides on photocatalytic activity of both titania polymorphs. These results provide fundamental insight into the photocatalytic properties of titania polymorphs and elucidate the effect of adsorbed anions over radical formation and oxidative decomposition of organic pollutants.

Critical impacts of interfacial water on C-H activation in photocatalytic methane conversion

On-site and on-demand photocatalytic methane conversion under ambient conditions is one of the urgent global challenges for the sustainable use of ubiquitous methane resources. However, the lack of microscopic knowledge on its reaction mechanism prevents the development of engineering strategies for methane photocatalysis. Combining real-time mass spectrometry and operando infrared absorption spectroscopy with ab initio molecular dynamics simulations, here we report key molecular-level insights into photocatalytic green utilization of methane. Activation of the robust C-H bond of methane is hardly induced by the direct interaction with photogenerated holes trapped at the surface of photocatalyst; instead, the C-H activation is significantly promoted by the photoactivated interfacial water species. The interfacial water hydrates and properly stabilizes hydrocarbon radical intermediates, thereby suppressing their overstabilization. Owing to these water-assisted effects, the photocatalytic conversion rates of methane under wet conditions are dramatically improved by typically more than 30 times at ambient temperatures (~300 K) and pressures (~1 atm) in comparison to those under dry conditions. This study sheds new light on the role of interfacial water and provides a firm basis for design strategies for non-thermal heterogeneous catalysis of methane under ambient conditions.

Heterojunction Design between WSe2 Nanosheets and TiO2 for Efficient Photocatalytic Hydrogen Generation

Design and fabrication of efficient and stable photocatalysts are critically required for practical applications of solar water splitting. Herein, a series of WSe2/TiO2 nanocomposites were constructed through a facile mechanical grinding method, and all of the nanocomposites exhibited boosted photocatalytic hydrogen evolution. It was discovered that the enhanced photocatalytic performance was attributed to the efficient electron transfer from TiO2 to WSe2 and the abundant active sites provided by WSe2 nanosheets. Moreover, the intimate heterojunction between WSe2 nanosheets and TiO2 favors the interfacial charge separation. As a result, a highest hydrogen evolution rate of 2.28 mmol/g·h, 114 times higher than pristine TiO2, was obtained when the weight ratio of WSe2/(WSe2 + TiO2) was adjusted to be 20%. The designed WSe2/TiO2 heterojunctions can be regarded as a promising photocatalysts for high-throughput hydrogen production.

Solid-Phase Synthesis of Titanium Dioxide Micro-Nanostructures

Titanium dioxide (TiO₂) micro-nanostructures are widely utilized in photochemical applications due to their unique band gaps and are of huge demand in scientific research and industrial manufacture. Herein, this work reports a controllable, facile, economical, and green solid-phase synthesis strategy to prepare TiO₂ with governable morphologies containing 1D nanorods, 3D microbulks, and irregular thick plates. Specifically, Ti powders are transformed into TiO₂ micro-nanostructures through dispersing them into a solid NaOH/KOH mixture with a low eutectic point, followed by grinding, heating, ion exchange, and calcination. As no solvents are utilized in the alkali treatment process, the usage of solvents is decreased and high vapor pressure is avoided. Moreover, the band gaps of TiO₂ micro-nanostructures can be regulated from 3.02 to 3.34 eV through altering the synthetic parameters. Notably, the as-prepared TiO₂ micro-nanostructures exhibit high photocatalytic activities in the degradation of rhodamine B and methylene blue under simulated solar light illumination. It is believed that the solid-phase synthesis strategy will be of huge demand for the synthesis of TiO₂ micro-nanostructures.

Reactivity of anatase (001) surface from first-principles many-body Green's function theory

The anatase (001) surface has attracted a lot of interest in surface science due to its excellent performance. However, its reactivity is under debate since it can undergo a (1 × 4) reconstruction. Herein, we applied the many-body Green's function theory to investigate the electronic properties and excitons as well as the water adsorption behavior of the (1 × 4) unreconstructed anatase (001) surface and two reconstructed patterns, namely ADM and AOM. Our results revealed that the high reactivity of the (001) surface is probably not relevant to the reconstructed shape. The unreconstructed (001) surface and reconstructed ADM surface were very reactive for dissociating H₂O molecules among three surfaces, but the lower-energy singlet exciton for ADM was completely confined within the inner atomic layers in TiO₂, which is unfavorable for hole transfer to the reactant on the surface. Also, the required photon energy for initiating photochemical reactions on the reconstructed ADM surface should be higher than for the unreconstructed (001) surface, implying it is more difficult for the reaction to happen on the former surface. The unreconstructed (001) surface exhibited the highest reactivity due to the smaller optical absorption edge and the photoholes distributed on surface sites.

The unreconstructed (001) surface seems to have superior reactivity than the reconstructed shapes.

Plasmonic phenomena in molecular junctions: principles and applications

Molecular junctions are building blocks for constructing future nanoelectronic devices that enable the investigation of a broad range of electronic transport properties within nanoscale regions. Crossing both the nanoscopic and mesoscopic length scales, plasmonics lies at the intersection of the macroscopic photonics and nanoelectronics, owing to their capability of confining light to dimensions far below the diffraction limit. Research activities on plasmonic phenomena in molecular electronics started around 2010, and feedback between plasmons and molecular junctions has increased over the past years. These efforts can provide new insights into the near-field interaction and the corresponding tunability in properties, as well as resultant plasmon-based molecular devices. This Review presents the latest advancements of plasmonic resonances in molecular junctions and details the progress in plasmon excitation and plasmon coupling. We also highlight emerging experimental approaches to unravel the mechanisms behind the various types of light-matter interactions at molecular length scales, where quantum effects come into play. Finally, we discuss the potential of these plasmonic-electronic hybrid systems across various future applications, including sensing, photocatalysis, molecular trapping and active control of molecular switches.

Bio-Inspired C/N/TiO2 Hybrid Composite Heterostructure: Enhanced Photocatalytic Activity under Visible Light

The hydrothermal treatment was used to create a natural hierarchical bio-inspired carbon and nitrogen-doped C/N/TiO2 hybrid composite. It is the goal of this work to investigate the photocatalytic activity of bio-inspired C/N/TiO2 hybrid composite. Techniques such as X-ray powder diffraction, scanning electron microscopy, UV-Vis absorption spectroscopy, FTIR, Raman, and photoluminescence spectroscopy were used to explore the structural, morphological, and photocatalysis characteristics of the bio-inspired C/N/TiO2 hybrid composite. By doping carbon and nitrogen, TiO2 nanotubes were able to improve the photocatalyst properties of the C/N/TiO2 hybrid composite, decrease the energy band gap (∼2.55 eV), and result in increased electron transfer efficiency when compared to pure TiO2. The photocatalytic degradation of pollutants (rhodamine B (RhB)) is made possible by the use of a bio-inspired C/N/TiO2 hybrid composite that has high interconnectivity and an easily accessible surface.

Preparation of High-Porosity B-TiO2/C3N4 Composite Materials: Adsorption-Degradation Capacity and Photo-Regeneration Properties

Adsorption can quickly remove pollutants in water, while photocatalysis can effectively decompose organic matter. B-TiO₂/g-C₃N₄ ternary composite photocatalytic materials were prepared by molten method, and their adsorption-degradation capability under visible light conditions was discussed. The morphology of the B-TiO₂/g-C₃N₄ materials was inspected by SEM, TEM, BET, and EDS, and the results showed that close interfacial connections between TiO₂ and g-C₃N₄, which are favorable for charge transfer between these two semiconductors, formed heterojunctions with suitable band structure which was contributed by the molten B₂O₃. Meanwhile, the molten B₂O₃ effectively increased the specific surface area of TiO₂/C₃N₄ materials, thereby increasing the active sites and reducing the recombination of photogenerated electron-hole pairs and improving the photocatalytic degradation abilities of TiO₂ and g-C₃N₄. Elsewhere, the crystal structure analysis (XRD, XPS, FTIR) results indicated that the polar -B=O bond formed a new structure with TiO₂ and g-C₃N₄, which is not only beneficial for inhibiting the recombination of electron holes but also improving the photocatalytic activity. By removal experiment, the adsorption and degradation performances of B-TiO₂/g-C₃N₄ composite material were found to be 8.5 times and 3.4 times higher than that of g-C₃N₄. Above all, this study prepared a material for removing water pollutants with high efficiency and provides theoretical support and experimental basis for the research on the synergistic removal of pollutants by adsorption and photocatalysis.

Adiabatic models for the quantum dynamics of surface scattering with lattice effects

In this contribution, we review models for the lattice effects in quantum dynamics calculations on surface scattering, which is important to modeling heterogeneous catalysis for achieving an interpretation of experimental measurements. Unlike dynamics models for reactions in the gas phase, those for heterogeneous reactions have to include the effects of the surface. For manageable computational costs in calculations, the effects of static surface (SS) are firstly modeled as this is simply and easily implemented. Then, the SS model has to be improved to include the effects of the flexible surface, that is the lattice effects. To do this, various surface models have been designed where the coordinates of the surface atoms are introduced in the Hamiltonian operator, especially those of the top surface atom. Based on this model Hamiltonian operator, extensive multi-dimension quantum dynamics calculations can be performed to recover the lattice effects. Here, we first review an overview of the techniques in constructing the Hamiltonian operator, which is a sum of the kinetic energy operator (KEO) and potential energy surface (PES). Since the PES containing the coordinates of the surface atoms in a cell is still expensive, the SS model is often accepted. We consider a mathematical model, called the coupled harmonic oscillator (CHO) model, to introduce the concepts of adiabatic and diabatic representations for separating the molecule and surface. Under the adiabatic model, we further introduce the expansion model where the potential function is Taylor expanded around the optimized geometry of the surface. By an expansion model truncated at the first and second order, various coupling surface models between the molecule and surface are derived. Moreover, by further and deeply understanding the adiabatic representation, an effective Hamiltonian operator is obtained by optimizing the total wave function in factorized form. By this factorized form of wave function and effective Hamiltonian operator, the geometry phase of the surface wave function is theoretically found. This theoretical prediction may be measured by carefully designing experiments. Finally, discussions on the adiabatic representation, the PES construction, and possibility of the classical-dynamics solutions are given. Based on these discussions, a simple outlook on the dynamics of photocatalytics is finally given.

Enhanced Photocatalytic Hydrogen Production Activity by Constructing a Robust Organic-Inorganic Hybrid Material Based Fulvalene and TiO2

A novel redox-active organic-inorganic hybrid material (denoted as H₄TTFTB-TiO₂) based on tetrathiafulvalene derivatives and titanium dioxide with a micro/mesoporous nanomaterial structure has been synthesized via a facile sol-gel method. In this study, tetrathiafulvalene-3,4,5,6-tetrakis(4-benzoic acid) (H₄TTFTB) is an ideal electron-rich organic material and has been introduced into TiO₂ for promoting photocatalytic H₂ production under visible light irradiation. Notably, the optimized composites demonstrate remarkably enhanced photocatalytic H₂ evolution performance with a maximum H₂ evolution rate of 1452 μmol g⁻¹ h⁻¹, which is much higher than the prototypical counterparts, the common dye-sensitized sample (denoted as H₄TTFTB-5.0/TiO₂) (390.8 μmol g⁻¹ h⁻¹) and pure TiO₂ (18.87 μmol g⁻¹ h⁻¹). Moreover, the composites perform with excellent stability even after being used for seven time cycles. A series of characterizations of the morphological structure, the photoelectric physics performance and the photocatalytic activity of the hybrid reveal that the donor-acceptor structural H₄TTFTB and TiO₂ have been combined robustly by covalent titanium ester during the synthesis process, which improves the stability of the hybrid nanomaterials, extends visible-light adsorption range and stimulates the separation of photogenerated charges. This work provides new insight for regulating precisely the structure of the fulvalene-based composite at the molecule level and enhances our in-depth fundamental understanding of the photocatalytic mechanism.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Cellulose-derived carbon (CC) dot-directed growth of ZnIn₂ S₄ was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn₂ S₄ nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn²⁺ and In³⁺ and the guided growth of ZnIn₂ S₄ . As a result, the nanosheets of ZnIn₂ S₄ are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn₂ S₄ shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn₂ S₄ sample can reach ∼2980 μmol g^-1 , about 3.4 times that of pristine ZnIn₂ S₄ . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.

Active site regulated Z-scheme MIL-101(Fe)/Bi2WO6/Fe(III) with the synergy of hydrogen peroxide and visible-light-driven photo-Fenton degradation of organic contaminants

Water pollution control is one of the major challenges currently faced. With the development of photocatalytic technology, an increasing number of new and efficient catalysts have been developed, but most of the catalysts have limited light capture ability and catalytic degradation efficiency. Therefore, in this work, hydrogen peroxide was further introduced to establish a photo-Fenton system to improve the photocatalytic effect by constructing a Z-scheme, and the degradation ability of the catalyst was maximized. Moreover, we successfully adhered bismuth tungstate nanosheets onto the surface of a MIL-101(Fe) framework and changed the number of active sites with iron ions of different doping amounts. We found that the number of active sites in the photo-Fenton system does not increase linearly, but increases and decreases regularly, which is similar to the change in band structure after doping. In addition, the results of the radical scavenger experiment and electron paramagnetic resonance (EPR) revealed that both hydroxide radical (˙OH) and superoxide radical (˙O₂^-) participated in methylene blue (MB) degradation, of which ˙OH was the main active species for pollutant degradation. Based on high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis, the possible degradation pathways were proposed. We believed that this work will provide insights into the heterojunction photo-Fenton system.

Photoelectrochemical and photo-Fenton mechanism of enhanced visible light-driven nanocatalyst synthesis of ZnFe2O4/BiOI

Based on the fact that the photo-Fenton process can directly use solar energy to degrade various pollutants, it has received widespread attention. However, it has attracted widespread attention due to the rapid recombination of photo-generated carriers and the low light response range. Therefore, the construction of a Z-scheme heterojunction in this paper can effectively enhance the electron-hole separation, increase the reduction and oxidation potential, and enhance the redox capability of the photocatalysis. This paper reports the successful preparation of visible-light-induced ZnFe₂O₄/BiOI composite photocatalysis. There is a Z-scheme heterojunction structure of ZnFe₂O₄ and BiOI. At the same time, the PL and UV absorption spectra showed that the light absorption performance of the composite nanomaterials was enhanced, the photo-generated carrier recombination rate was reduced, and the photo-Fenton performance was also significantly improved. And the photocurrent of ZnFe₂O₄/BiOI is more than 27 times that of pure ZnFe₂O₄. In addition, ZnFe₂O₄/BiOI can degrade the simulated pollutant RhB 100% within 20 min under simulated sunlight. It shows that ZnFe₂O₄/BiOI binary composite has excellent photo-Fenton properties. In addition, ZnFe₂O₄/BiOI still maintains a high photo-Fenton ability after three cycles. Therefore, it has potential application prospects of the industrial photodegradation of organic pollutants.

Non-Noble Plasmonic Metal-Based Photocatalysts

Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the sustainable approaches to tackle the growing environmental and energy challenges. Among various promising photocatalytic materials, plasmonic-driven photocatalysts feature prominent solar-driven surface plasmon resonance (SPR). Non-noble plasmonic metals (NNPMs)-based photocatalysts have been identified as a unique alternative to noble metal-based ones due to their advantages like earth-abundance, cost-effectiveness, and large-scale application capability. This review comprehensively summarizes the most recent advances in the synthesis, characterization, and properties of NNPMs-based photocatalysts. After introducing the fundamental principles of SPR, the attributes and functionalities of NNPMs in governing surface/interfacial photocatalytic processes are presented. Next, the utilization of NNPMs-based photocatalytic materials for the removal of pollutants, water splitting, CO₂ reduction, and organic transformations is discussed. The review concludes with current challenges and perspectives in advancing the NNPMs-based photocatalysts, which are timely and important to plasmon-based photocatalysis, a truly interdisciplinary field across materials science, chemistry, and physics.

Selective Photoelectrocatalytic Glycerol Oxidation to Dihydroxyacetone via Enhanced Middle Hydroxyl Adsorption over a Bi2O3-Incorporated Catalyst

Photoelectrocatalytic (PEC) glycerol oxidation offers a sustainable approach to produce dihydroxyacetone (DHA) as a valuable chemical, which can find use in cosmetic, pharmaceutical industries, etc. However, it still suffers from the low selectivity (≤60%) that substantially limits the application. Here, we report the PEC oxidation of glycerol to DHA with a selectivity of 75.4% over a heterogeneous photoanode of Bi₂O₃ nanoparticles on TiO₂ nanorod arrays (Bi₂O₃/TiO₂). The selectivity of DHA can be maintained at ∼65% under a relatively high conversion of glycerol (∼50%). The existing p-n junction between Bi₂O₃ and TiO₂ promotes charge transfer and thus guarantees high photocurrent density. Experimental combined with theoretical studies reveal that Bi₂O₃ prefers to interact with the middle hydroxyl of glycerol that facilitates the selective oxidation of glycerol to DHA. Comprehensive reaction mechanism studies suggest that the reaction follows two parallel pathways, including electrophilic OH* (major) and lattice oxygen (minor) oxidations. Finally, we designed a self-powered PEC system, achieving a DHA productivity of 1.04 mg cm^-2 h^-1 with >70% selectivity and a H₂ productivity of 0.32 mL cm^-2 h^-1. This work may shed light on the potential of PEC strategy for biomass valorization toward value-added products via PEC anode surface engineering.

Ag3PO4-based photocatalysts and their application in organic-polluted wastewater treatment

Semiconductor photocatalysis technology has shown great potential in the field of organic pollutant removal, as it can use clean and pollution-free solar energy as driving force. The discovery of silver phosphate (Ag₃PO₄) is a major breakthrough in the field of visible light responsive semiconductor photocatalysis due to its robust capacity to absorb visible light < 520 nm. Furthermore, the holes produced in Ag₃PO₄ under light excitation possess a strong oxidation ability. However, the strong oxidation activity of Ag₃PO₄ is only achieved in the presence of electron sacrifice agents. Otherwise, photocorrosion would greatly reduce the reuse efficiency of Ag₃PO₄. This review thus focuses on the structural characteristics and preparation methods of Ag₃PO₄. Particularly, the recent advances in noble metal deposition, ion doping, and semiconductor coupling, as well as methods of magnetic composite modification for the improvement of catalytic activity and recycling efficiency of Ag₃PO₄-based catalysts, were also discussed, and all of these measures could enhance the catalytic performance of Ag₃PO₄ toward organic pollutants degradation. Additionally, some potential modification methods for Ag₃PO₄ were also proposed. This review thus provides insights into the advantages and disadvantages of the application of Ag₃PO₄ in the field of photocatalysis, clarifies the photocorrosion essence of Ag₃PO₄, and reveals the means to improve photocatalytic activity and stability of Ag₃PO₄. Furthermore, it provides a theoretical and methodological basis for studying Ag₃PO₄-based photocatalyst and also compiles valuable information regarding the photocatalytic treatment of organic polluted wastewater.

A light-heat synergism in the sub-bandgap photocatalytic response of pristine TiO2: a study of in situ diffusion reflectance and conductance

Pristine TiO₂ materials are mainly used as photocatalysts under super-bandgap light illumination. The sub-bandgap (SBG) photocatalytic response has seldom been investigated and the mechanism of action remains unclear. In the current research, we firstly study the SBG light electronic transition of pristine P25 TiO₂ by means of in situ diffusion reflectance and (photo)conductance measurements under finely controllable conditions. It is revealed that the SBG light can promote valence band (VB) electrons to the exponentially-distributed gap states of the TiO₂, which can then be thermally activated to the CB states. A hole in the VB and an electron in the CB can be generated by the synergism of a SBG photon and heat. It is also seen that the photoinduced electrons can transfer to O₂ through the CB states, and that the holes can be captured by isopropanol molecules. As a result, isopropanol dehydrogenation can occur over pristine TiO₂ under SBG light illumination. It is seen that the photocatalytic activity increases with temperature and the energy of the SBG photons, in agreement with the light-heat synergistic electric transition via the exponential gap states. The present research reveals a mechanism for the SBG light photocatalytic response of pristine TiO₂ materials, which is important in designing highly-active visible light active photocatalysts.

Construction of a hierarchical ZnIn2S4/C3N4 heterojunction for the enhanced photocatalytic degradation of tetracycline

Efficient charge separation and sufficiently exposed active sites are both critical limiting factors for solar-driven organic contaminant degradation. Herein, we describe a hierarchical heterojunction photocatalyst fabricated by the in situ growth of ZnIn₂S₄ nanosheets on micro-tubular C₃N₄ (denoted as ZIS/TCN). This ZIS/TCN heterojunction photocatalyst can take advantage of the hollow structure with stronger light absorption capacity and more active sites, and its heterostructure can accelerate the separation and transfer of photogenerated charge carriers. The optimized ZIS/TCN-3 exhibits superb photocatalytic efficiency for the degradation of tetracycline (86.1%, 60 min), maintains excellent stability and recyclability, and provides a facile strategy for the synthesis of efficient heterojuction photocatalysts towards wastewater treatment. In addition, the plausible photocatalytic degradation pathway of tetracycline is proposed according to the intermediates identified by LC-mass analysis.

Developing Atomically Thin Li1.81H0.19Ti2O5·2H2O Nanosheets for Selective Photocatalytic CO2 Reduction to CO

Solar-driven CO₂ conversion to carbon-based fuels is an attractive approach to alleviate the worsening global climate change and increasing energy issues. However, exploring and designing efficient photocatalysts with excellent activity and stability still remain challenging. Herein, layered Li_1.81H_0.19Ti₂O₅·2H₂O (LHTO) nanosheets were explored as the photocatalyst for photocatalytic CO₂ reduction, and atomically thin LHTO nanosheets with one-unit-cell thickness were successfully constructed for photocatalytic CO₂ reduction. The atomically thin LHTO nanosheets exhibited excellent performance for CO₂ photoreduction to CO, with a yield rate of 4.0 μmol g^-1 h^-1, a selectivity of 93%, and over 25 h photostability, dramatically outperforming the bulk LHTO. The better performance of the atomically thin LHTO nanosheets was experimentally verified to benefit from more sites for CO₂ adsorption, faster electron transfer rate, and a more negative conduction band edge compared with bulk LHTO. This work provided a methodological basis for designing more efficient photocatalytic CO₂ reduction catalysts.

A photo-responsive p-Si/TiO2/Ag heterostructure with charge transfer for recyclable surface-enhanced Raman scattering substrates

A Si/TiO2/Ag heterostructure is prepared as a recyclable SERS substrate with EF of 1.23 × 1012 and excellent repeatability, which can boost performance effectively by the synergistic contribution of the EM and CT enhancement effects.

Surface Enriching Promotes Decomposition of Benzene from Air

The low generation rate and short lifetime of reactive oxidation radicals typical like ·OH strictly limit the photocatalytic degradation of benzene in the air. Here, we adopt copper dopant to...