Life-Cycle Greenhouse Gas Emissions and Human Health Trade-Offs of Organic Waste Management Strategies

Greenhouse gases emissions and global climate change: Examining the influence of CO2, CH4, and N2O

An in-depth analysis of the role of greenhouse gases (GHGs) in climate change is examined here along with their diverse sources, including the combustion of fossil fuels, agriculture, and industrial processes. Key GHG components such as carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) are considered, along with data on emissions across various economic sectors. The consequences of climate change are also highlighted, ranging from more frequent and intense extreme weather events to rising sea levels and impacts on ecosystems and human health. The industrial revolution and unrestricted use of fossil fuels are key factors leading to an increase in GHG concentrations in the atmosphere. Global efforts to reduce emissions are considered, starting with the 1997 Kyoto Protocol and culminating in the 2015 Paris Agreement. The limited effectiveness of early initiatives is underscored, emphasizing the significant importance of the Paris Agreement that provides a global framework for establishing goals to reduce GHG emissions by country. The Green Climate Fund and other international financial mechanisms are also considered as essential tools for financing sustainable projects in developing countries. The global community faces the challenge and necessity for more ambitious efforts to achieve the set goals for reducing GHG emissions. Successful strategies are examined by Sweden, Costa Rica, and Denmark to achieve zero GHG emissions that integrate renewable energy sources and technologies. The importance of global cooperation for creating a sustainable future is also emphasized.

Utilization of plant-derived wastes as the potential biohydrogen source: a sustainable strategy for waste management

The sustainable economy has shown a renewed interest in acquiring access to the resources required to promote innovative practices that favor recycling and the reuse of existing, unconsidered things over newly produced ones. The production of biohydrogen through dark anaerobic fermentation of organic wastes is one of the intriguing possibilities for replacing fossil-based fuels through the circular economy. At present, plant-derived waste from the agro-based industry is the main global concern. When these wastes are improperly disposed of in landfills, they become the habitat for several pathogens. Additionally, it contaminates surface water as a result of runoff, and the leachate that is created from the waste enters groundwater and degrades its quality. However, cellulose and hemicellulose-rich plant wastes from agriculture fields and agro-based industries have been employed as the most efficient feedstock since carbohydrates are the primary substrate for the synthesis of biohydrogen. To produce biohydrogen from plant-derived wastes on a large scale, it is necessary to explore comprehensive knowledge of lab-scale parameters and pretreatment strategies. This paper summarizes the problems associated with the improper management of plant-derived wastes and discusses the recent developments in dark fermentation and substrate pretreatment techniques with the goal of gaining significant insight into the biohydrogen production process. It also highlights the utilization of anaerobic digestate, which is left over after biohydrogen gas as feedstock for the development of value-added products such as volatile fatty acids (VFA), biochar, and biofertilizer.

In-depth analysis to develop a social marketing model to promote women's participation in waste segregation behaviour: A qualitative study

Waste separation is one of the key factors in managing solid waste and creating a healthy environment. Waste separation at source has always been associated with challenges. Therefore, this study was conducted to determine the perceptions of housewives and related parties regarding the factors that influence waste separation behaviour and to identify approaches to improve behaviour based on the social marketing framework. This study was conducted as a qualitative content analysis in Amol City in 2022. The data was collected through semi-structured individual interviews. A total of 25 housewives were selected as main participants and 5 stakeholders through purposive selection. The results of the study included lack of awareness of recyclable materials (product), personal, family and environmental barriers (price), lack of doorstep collection of dry waste (place), and lack of use of appropriate technology (promotion). The lack of financial resources, inappropriate political measures and the coronavirus pandemic were also the causes of this challenge. Most participants cited environmental and educational deficits as the main reason for not separating waste. It is possible to improve waste sorting behaviour at source through appropriate behavioural interventions at the individual, social and environmental levels. Researchers can use the results of this study to design, implement and evaluate waste segregation intervention programmes for housewives.

A review on the evaluation models and impact factors of greenhouse gas emissions from municipal solid waste management processes

The total amount of global municipal solid waste (MSW) will reach 3.5 billion tons by 2050, thereby bringing tremendous environmental pressure, especially global warming. Large amounts of greenhouse gases (GHGs) have been released during MSW management (MSWM). Accounting for GHG emissions is a prerequisite for providing recommendations on appropriate treatment options to mitigate emissions from MSWM systems. There are many methods involved in estimating emissions. This paper summarizes the computing models commonly used in each process of the integrated MSWM system and emphasizes the influence of parameters and other factors. Compared with other disposal methods, landfilling has the highest emissions, commonly estimated using first-order decay (FOD) methods. Emission reduction can be realized through waste to energy (WtE) and resource recovery measures. IPCC is commonly used for calculating direct emissions, while LCA-based models can calculate emissions including upstream and downstream processes, whose results depend on assumptions and system boundaries. The estimation results of models vary greatly and are difficult to compare with each other. Besides, large gaps exist between the default emission factors (EFs) provided by models and those F measured in specific facilities. These findings provide a systematic view for a bettering understanding of MSW emissions as well as the estimating methods and also reveal the key points that need be developed in the future.

The Environmental Impact of Gastrointestinal Procedures: A Prospective Study of Waste Generation, Energy Consumption, and Auditing in an Endoscopy Unit

BACKGROUND & AIMS

Gastrointestinal (GI) endoscopy procedures are critical for screening, diagnosis, and treatment of a variety of GI disorders. However, like the procedures in other medical disciplines, they are a source of environmental waste generation and energy consumption.

METHODS

We prospectively collected data on total waste generation, energy consumption, and the role of intraprocedural inventory audit of a single tertiary care academic endoscopy unit over a 2-month period (May-June 2022). Detailed data on items used were collected, including procedure type (esophagogastroduodenoscopy or colonoscopy), accessories, intravenous tubing, biopsy jars, linen, and personal protective equipment use. Data on endoscope reprocessing-related waste generation and energy use in the endoscopy unit (equipment, lights, and computers) were also collected. We used an endoscopy staff-guided auditing and review of the items used during procedures to determine potentially recyclable items going to landfill waste. The waste generated was stratified into biohazardous, nonbiohazardous, or potentially recyclable items.

RESULTS

A total of 450 consecutive procedures were analyzed for total waste management (generation and reprocessing) and energy consumption. The total waste generated during the study period was 1398.6 kg (61.6% directly going to landfill, 33.3% biohazard waste, and 5.1% sharps), averaging 3.03 kg/procedure. The average waste directly going to landfill was 219 kg per 100 procedures. The estimated total annual waste generation approximated the size of 2 football fields (1-foot-high layered waste). Endoscope reprocessing generated 194 gallons of liquid waste per day, averaging 13.85 gallons per procedure. Total energy consumption in the endoscopy unit was 277.1 kW·h energy per day; for every 100 procedures, amounting to 1200 miles of distance traveled by an average fuel efficiency car. The estimated carbon footprint for every 100 GI procedures was 1501 kg carbon dioxide (CO2) equivalent (= 1680 lbs of coal burned), which would require 1.8 acres of forests to sequester. The recyclable waste audit and review demonstrated that 20% of total waste consisted of potentially recyclable items (8.6 kg/d) that could be avoided by appropriate waste segregation of these items.

CONCLUSIONS

On average, every 100 GI endoscopy procedures (esophagogastroduodenoscopy/colonoscopy) are associated with 303 kg of solid waste and 1385 gallons of liquid waste generation, and 1980 kW·h energy consumption. Potentially recyclable materials account for 20% of the total waste. These data could serve as an actionable model for health systems to reduce total waste generation and decrease landfill waste and water waste toward environmentally sustainable endoscopy units.

Whether biorefinery is a promising way to support waste source separation? From the life cycle perspective

Since the implementation of the waste separation policy, the disposal of source-separated food waste (FW) has been more strictly required. Traditional source-separated FW treatment technologies, such as anaerobic digestion (AD) and aerobic composting (AC), suffer from low resource utilization efficiency and poor economic benefits. It is one of the main limiting factors for the promotion of waste separation. Life cycle assessment (LCA) was conducted for five municipal solid waste (MSW) treatment technologies, compared their environmental impacts, and analyzed the impact of waste separation ratios to determine whether biorefinery is a promising way to support waste source separation. The results showed that black soldier fly (BSF) treatment had the lowest net global warming potential (GWP) of all technologies, reduced by 40.8 % relative to the non-source-separated treatment. Ethanol production had the second-lowest net environmental impact potential because bioethanol replaces fossil fuel to avoid the emission of pollutants from its combustion. When two biorefinery technologies with excellent efficiency to avoid environmental impact are used to treat source-separated FW, the increase in the percentage of waste separation will help reduce the environmental impact of MSW treatment. The application of biorefinery technologies is considered a viable option for source-separated FW treatment. AC should not be widely promoted because it showed the worst net environmental benefits, and waste separation will elevate the environmental impact of its treatment process.

Complementary roles for mechanical and solvent-based recycling in low-carbon, circular polypropylene

Plastic recycling presents a vexing challenge. Mechanical recycling offers substantial greenhouse gas emissions savings relative to virgin plastic production but suffers from degraded aesthetic and mechanical properties. Polypropylene, one of the most widely used and lowest-cost plastics, features methyl pendants along the polymer backbone, rendering it particularly susceptible to declining properties, performance, and aesthetics across a succession of mechanical recycles. Advanced processes, such as solvent-assisted recycling, promise near-virgin quality outputs at a greater energy and emissions footprint. Mechanical and advanced recycling are often presented as competing options, but real-world plastic waste streams are likely to require preprocessing regardless of whether they are routed to an advanced process. This study quantifies the life-cycle greenhouse gas implications of multiple recycling strategies and proposes a system in which mechanical and solvent-assisted recycling can be leveraged together to boost recycling rates and satisfy demand for a wider range of product applications. Polypropylene can be recovered from mixed-plastic bales produced at material recovery facilities and processed through mechanical recycling, with a varying fraction sent for further upgrading via solvent-assisted recycling to produce material approved for food packaging and other higher-quality applications. The resulting mechanically recycled rigid polypropylene reduces life-cycle greenhouse gas emissions by 80% relative to the same quantity of virgin material, while the upgraded higher-quality material achieves GHG savings of 30%.

Integrating food waste management into urban wastewater treatment: Economic and environmental impacts

Food waste is the main component of municipal solid waste (MSW) and its sustainable management is a global challenge. Co-treatment of food waste and urban wastewater in wastewater treatment plants (WWTPs) could be a plausible management strategy to reduce the MSW amount that is disposed in landfills, while converting its organic fraction into biogas in the WWTP. However, the increased organic load in the wastewater influent would impact the capital and operating costs of the WWTP, mainly due to the increase in sludge production. In this work, different scenarios for co-treatment of food waste and wastewater were studied from both economic and environmental perspectives. These scenarios were designed based on different sludge disposal and management options. The results showed that the co-treatment of food waste and wastewater would be more environmentally friendly than their separate treatment, but its economic feasibility strongly depends on the ratio between the management costs of MSW and sewage sludge.

Bokashi fermentation of brewery's spent grains positively affects larval performance of the black soldier fly Hermetia illucens while reducing gaseous nitrogen losses

Digestion of waste feedstocks by larvae of the black soldier fly Hermetia illucens (Diptera: Stratiomyidae) (BSF) results in proteins for animal feed and organic fertilizer with a reduced environmental footprint, but it can still have negative environmental effects through greenhouse gas (GHG) and ammonia (NH3) emissions. Both biomass conversion by BSF larvae and associated GHG and NH3 emissions can depend on substrate properties that may be optimized through microbial inoculation pre-treatments, such as bokashi fermentation. Here, we quantified the effects of bokashi fermentation of brewery's spent grains on BSF rearing metrics and associated GHG and NH3 emissions at benchtop scale. We found that bokashi fermentation increased larval biomass by 40% and shortened development time by over two days on average, compared with unfermented spent grains. In line with increased larval growth, CO2 emissions in BSF larvae treatments were 31.0 and 79.0% higher in the bokashi fermented spent grains and Gainesville substrates, respectively, compared to the unfermented spent grains. Adding BSF larvae to the spent grains increased cumulative N2O emissions up to 64.0 mg N2O kg substratedry-1 but there were essentially no N2O emissions when larvae were added to fermented spent grains. Bokashi fermentation also reduced NH3 fluxes from the volatilization of substrate nitrogen in the BSF larvae treatment by 83.7-85.8% during days 7 and 9, possibly by increasing N assimilation by larvae or by reducing the transformation of substrate NH4+ to NH3. Therefore, bokashi fermentation may be applied to improve performance of BSF larvae on a common industrial waste stream and reduce associated emissions.

Informal waste pickers in guayaquil: Recycling rates, environmental benefits, main barriers, and troubles

Systems for managing municipal solid waste are typically ineffective in developing nations because of governments' deficient financial and administrative frameworks, poor rules, and a lack of suitable infrastructure and human resources. The informal sector plays an essential role in these systems by reprocessing waste into secondary raw materials, reducing collection and disposal costs, and, most importantly, benefiting the environment by avoiding incineration and landfilling. However, their actual contributions remain unknown. The present paper aims to understand the role of informal waste pickers (IWPs) in the waste management system of Guayaquil City and their environmental impact through the calculations of the carbon footprint (CF) avoided due to their aid. The survey design gathered information on their personal profiles, types, and rates of collected recyclables, market conditions, their main barriers, and troubles regarding their formalization. The results of the survey demonstrate that waste picking is mostly a male-driven activity, the average daily mass collected per IWP is 13 kg, the most collected recyclable waste is polyethylene terephthalate, their average monthly income is $179, and the total avoided CF of the entire informal waste picking process is almost 14 thousand tons of CO2 eq yearly. Further, IWPs prefer to operate alone, and only 16% of them would join a cooperative, despite their numerous financial, logistical, and personal challenges.

Regionalized life-cycle monetization can support the transition to sustainable rural food waste management in China

Innovative recycling technologies can help curb food waste, yet their implementation often involves trade-offs among different environmental issues and among environmental, economic and social issues. Monetization can provide a solution to integrate all environmental impacts across the life cycle of food waste and to enable a normalized evaluation with economic accounting. Herein, a Chinese regionalized monetization model was applied to various indicators related to the environment, resource depletion and human health to assess ten typical rural food waste recycling technologies in Zhejiang province. The results reveal that biodrying and maturity and two bioconversion options are promising solutions, considering both environmental and economic impacts as well as the shifting of environmental impacts among different compartments as hidden risks. The monetization method proposed here could be applied to other sectors to support decision-making towards more sustainable development.

Non-negligible health risks caused by inhalation exposure to aldehydes and ketones during food waste treatments in megacity Shanghai

Aldehydes and ketones in urban air continue to receive regulatory and scientific attention for their environmental prevalence and potential health hazard. However, current knowledge of the health risks and losses caused by these pollutants in food waste (FW) treatment processes is still limited, especially under long-term exposure. Here, we presented the first comprehensive assessment of chronic exposure to 21 aldehydes and ketones in urban FW-air environments (e.g., storage site, mechanical dewatering, and composting) by coupling substantial measured data (383 samples) with Monte Carlo-based probabilistic health risk and impact assessment models. The results showed that acetaldehyde, acetone, 2-butanone and cyclohexanone were consistently the predominant pollutants, although the significant differences in pollution profiles across treatment sites and seasons (Adonis test, P < 0.001). According to the risk assessment results, the estimated cancer risk (CR; mean range: 1.6 × 10^-5-1.12 × 10^-4) and non-cancer risk (NCR; mean range: 2.98-22.7) triggered by aldehydes and ketones were both unacceptable in most cases (CR: 37.8%-99.3%; NCR: 54.2%-99.8%), and even reached the limit of concern to CR (1 × 10^-4) in some exposure scenarios (6.18%-16.9%). Application of DALYs (disability adjusted life years) as a metric for predicting the damage suggested that exposure of workers to aldehydes and ketones over 20 years of working in FW-air environments could result in 0.02-0.14 DALYs per person. Acetaldehyde was the most harmful constituent of all targeted pollutants, which contributed to the vast majority of health risks (>88%) and losses (>90%). This study highlights aldehydes and ketones in FW treatments may be the critical pollutants to pose inhalation risks.

The temporal and spatial characteristics and influencing factors of CO2 emissions from municipal solid waste in China

Understanding the temporal and spatial characteristics of carbon dioxide (CO₂) emissions from municipal solid waste (MSW) and a quantitative evaluation of the contribution rate of the factors influencing the changes in CO₂ emissions are important for pollution and emission reduction and the realization of the "double carbon" goal. This study analyzed the spatial and temporal evolution of waste generation and treatment based on panel data from 31 Chinese provinces over the past 15 years and then applied the logarithmic mean Divisia index (LMDI) model to study the driving factors of CO₂ emissions from MSW. China's MSW production and CO₂ emissions displayed a rising trend, and the overall CO₂ emissions showed a geographical pattern of being high in the east and low in the west. Carbon emission intensity, economic output, urbanization level, and population size were positive factors that increased CO₂ emissions. The most important factors driving CO₂ emissions were carbon emission intensity and economic output, with cumulative contribution rates of 55.29% and 47.91%, respectively. Solid waste emission intensity was a negative factor in reducing CO₂ emissions, with a cumulative contribution rate of -24.52%. These results have important implications for the design of policies to reduce CO₂ emissions from MSW.

Cradle-to-grave emissions from food loss and waste represent half of total greenhouse gas emissions from food systems

Global greenhouse gas (GHG) emissions from food loss and waste (FLW) are not well characterized from cradle to grave. Here GHG emissions due to FLW in supply chain and waste management systems are quantified, followed by an assessment of the GHG emission reductions that could be achieved by policy and technological interventions. Global FLW emitted 9.3 Gt of CO₂ equivalent from the supply chain and waste management systems in 2017, which accounted for about half of the global annual GHG emissions from the whole food system. The sources of FLW emissions are widely distributed across nine post-farming stages and vary according to country, region and food category. Income level, technology availability and prevailing dietary pattern also affect the country and regional FLW emissions. Halving FLW generation, halving meat consumption and enhancing FLW management technologies are the strategies we assess for FLW emission reductions. The region-specific and food-category-specific outcomes and the trade-off in emission reductions between supply chain and waste management are elucidated. These insights may help decision makers localize and optimize intervention strategies for sustainable FLW management.

Co-Processing Agricultural Residues and Wet Organic Waste Can Produce Lower-Cost Carbon-Negative Fuels and Bioplastics

Scalable, low-cost biofuel and biochemical production can accelerate progress on the path to a more circular carbon economy and reduced dependence on crude oil. Rather than producing a single fuel product, lignocellulosic biorefineries have the potential to serve as hubs for the production of fuels, production of petrochemical replacements, and treatment of high-moisture organic waste. A detailed techno-economic analysis and life-cycle greenhouse gas assessment are developed to explore the cost and emission impacts of integrated corn stover-to-ethanol biorefineries that incorporate both codigestion of organic wastes and different strategies for utilizing biogas, including onsite energy generation, upgrading to bio-compressed natural gas (bioCNG), conversion to poly(3-hydroxybutyrate) (PHB) bioplastic, and conversion to single-cell protein (SCP). We find that codigesting manure or a combination of manure and food waste alongside process wastewater can reduce the biorefinery's total costs per metric ton of CO₂ equivalent mitigated by half or more. Upgrading biogas to bioCNG is the most cost-effective climate mitigation strategy, while upgrading biogas to PHB or SCP is competitive with combusting biogas onsite.

Greenhouse Gas and Air Pollutant Emissions from Composting

Composting can divert organic waste from landfills, reduce landfill methane emissions, and recycle nutrients back to soils. However, the composting process is also a source of greenhouse gas and air pollutant emissions. Researchers, regulators, and policy decision-makers all rely on emissions estimates to develop local emissions inventories and weigh competing waste diversion options, yet reported emission factors are difficult to interpret and highly variable. This review explores the impacts of waste characteristics, pretreatment processes, and composting conditions on CO₂, CH₄, N₂O, NH₃, and VOC emissions by critically reviewing and analyzing 388 emission factors from 46 studies. The values reported to date suggest that CH₄ is the single largest contributor to 100-year global warming potential (GWP₁₀₀) for yard waste composting, comprising approximately 80% of the total GWP₁₀₀. For nitrogen-rich wastes including manure, mixed municipal organic waste, and wastewater treatment sludge, N₂O is the largest contributor to GWP₁₀₀, accounting for half to as much as 90% of the total GWP₁₀₀. If waste is anaerobically digested prior to composting, N₂O, NH₃, and VOC emissions tend to decrease relative to composting the untreated waste. Effective pile management and aeration are key to minimizing CH₄ emissions. However, forced aeration can increase NH₃ emissions in some cases.

Analysis of Worldwide Greenhouse and Carbon Monoxide Gas Emissions: Which Countries Exhibit a Special Pattern? A Closer Look via Twitter

There is significant global concern about the harmful effects of greenhouse gas and carbon monoxide emissions (deforestation, air pollution, global warming, etc.). The 2015 Paris Agreement on climate change aspires to reduce global warming by achieving a climate-neutral world. Research has been carried out to calculate and diminish the aforementioned emissions in waste, power industry, transport, building, in addition to other areas. The aim of this paper is to analyse the carbon and greenhouse gas emissions across countries around the globe in order to find patterns and correlate them to socio-economic indicators [gross national income (GNI), industrial production (IPI) and human development indexes (HDI)] as well as Twitter interactions regarding climate change. For this purpose, time series and socio-economic data have been downloaded from different repositories including EDGAR (Emissions Database for Global Atmospheric Research), World Bank and UNDP (United Nations Development Programme). Although classical clustering algorithms have already been used in the examination of some environmental issues, we use a non-parametric time series clustering method, which has been suggested in certain scientific literature as a more flexible approach, since any ad hoc parametric assumptions are required. The chosen socio-economic indicators have also demonstrated their relevance in pieces of research related to various fields. With respect to Twitter, which is one of the most popular social networks nowadays, significant analysis has also been performed on the basis of capturing citizens' perceptions on a multitude of matters. We found that several countries such as Brazil, India, China, Nigeria, Russia, United States, Spain, Andorra, Greece, and Qatar show differences in carbon and greenhouse gas emissions patterns. Besides, there does not seem to be a correlation between GNI, IPI and HDI as well as the above mentioned emissions ( correlation < 0.16 ) . Regarding Twitter interactions, a dissimilarity in the distribution of hashtags was detected between the aforementioned countries and the rest of the world. This research can help to identify countries in which more governmental measures are needed to reduce the type of emissions analysed in certain industrial sectors. In addition, it points out the topics related to climate change that seem to generate the most debate on Twitter for countries with an unusual pattern.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s41742-023-00510-4.

Environmental and Economic Impacts of Managing Nutrients in Digestate Derived from Sewage Sludge and High-Strength Organic Waste

Increasingly stringent limits on nutrient discharges are motivating water resource recovery facilities (WRRFs) to consider the implementation of sidestream nutrient removal or recovery technologies. To further increase biogas production and reduce landfilled waste, WRRFs with excess anaerobic digestion capacity can accept other high-strength organic waste (HSOW) streams. The goal of this study was to characterize and evaluate the life-cycle global warming potential (GWP), eutrophication potential, and economic costs and benefits of sidestream nutrient management and biosolid management strategies following digestion of sewage sludge augmented by HSOW. Five sidestream nutrient management strategies were analyzed using environmental life-cycle assessment (LCA) and life-cycle cost analysis (LCCA) for codigestion of municipal sewage sludge with and without HSOW. As expected, thermal stripping and ammonia stripping were characterized by a much lower eutrophication potential than no sidestream treatment; significantly higher fertilizer prices would be needed for this revenue stream to cover the capital and chemical costs. Composting all biosolids dramatically reduced the GWP relative to the baseline biosolid option but had slightly higher eutrophication potential. These complex environmental and economic tradeoffs require utilities to consider their social, environmental, and economic values in addition to present or upcoming nutrient discharge limits prior to making decisions in sidestream and biosolids management.

Carbon and N conservation during composting: A review

Composting, as a conventional solid waste treatment method, plays an essential role in carbon and nitrogen conservation, thereby reducing the loss of nutrients and energy. However, some carbon- and nitrogen-containing gases are inevitably released during the process of composting due to the different operating conditions, resulting in carbon and nitrogen losses. To overcome this obstacle, many researchers have been trying to optimize the adjustment parameters and add some amendments (i.e., pHysical amendments, chemical amendments and microbial amendments) to reduce the losses and enhance carbon and nitrogen conservation. However, investigation regarding mechanisms for the conservation of carbon and nitrogen are limited. Therefore, this review summarizes the studies on physical amendments, chemical amendments and microbial amendments and proposes underlying mechanisms for the enhancement of carbon and nitrogen conservation: adsorption or conversion, and also evaluates their contribution to the mitigation of the greenhouse effect, providing a theoretical basis for subsequent composting-related researchers to better improve carbon and nitrogen conservation measures. This paper also suggests that: assessing the contribution of composting as a process to global greenhouse gas mitigation requires a complete life cycle evaluation of composting. The current lack of compost clinker impact on carbon and nitrogen sequestration capacity of the application site needs to be explored by more research workers.

Microorganisms as New Sources of Energy

The use of fossil energy sources has a negative impact on the economic and socio-political stability of specific regions and countries, causing environmental changes due to the emission of greenhouse gases. Moreover, the stocks of mineral energy are limited, causing the demand for new types and forms of energy. Biomass is a renewable energy source and represents an alternative to fossil energy sources. Microorganisms produce energy from the substrate and biomass, i.e., from substances in the microenvironment, to maintain their metabolism and life. However, specialized microorganisms also produce specific metabolites under almost abiotic circumstances that often do not have the immediate task of sustaining their own lives. This paper presents the action of biogenic and biogenic–thermogenic microorganisms, which produce methane, alcohols, lipids, triglycerides, and hydrogen, thus often creating renewable energy from waste biomass. Furthermore, some microorganisms acquire new or improved properties through genetic interventions for producing significant amounts of energy. In this way, they clean the environment and can consume greenhouse gases. Particularly suitable are blue-green algae or cyanobacteria but also some otherwise pathogenic microorganisms (E. coli, Klebsiella, and others), as well as many other specialized microorganisms that show an incredible ability to adapt. Microorganisms can change the current paradigm, energy–environment, and open up countless opportunities for producing new energy sources, especially hydrogen, which is an ideal energy source for all systems (biological, physical, technological). Developing such energy production technologies can significantly change the already achieved critical level of greenhouse gases that significantly affect the climate.

Partial Replacement of Municipal Incinerated Bottom Ash and PET Pellets as Fine Aggregate in Cement Mortars

The objective of this study was to examine the optimal mixing ratio of municipal incinerated bottom ash (MIBA) and PET pellets used as a partial replacement of fine aggregates in the manufacture of cement mortars. As a partial replacement for sand, 15 mortar specimens were prepared by mixing 0%, 10%, 20%, 30%, and 40% municipal incinerated bottom ash (MIBA) (A) and 0%, 10%, and 20% PET pellets (P) in 5 cm × 5 cm × 5 cm cube molds. The cement/aggregate ratio was 1:3, and the water/cement ratio was 0.5 for all specimens. The results showed that the compressive strength of cement mortars decreased when increasing the amount of MIBA and PET pellets. The mortar specimens with 10% PET pellets achieved the highest compressive strength (49.53 MPa), whereas the mortar specimens with 40% MIBA and 20% PET pellets achieved the lowest compressive strength (24.44 MPa). Based on this finding, replacing 10% and 20% sand in cement mortar with only MIBA or only PET pellets could result in compressive strengths ranging from 46.00 MPa to 49.53 MPa.

Anaerobic Digestate from Biogas Plants—Nuisance Waste or Valuable Product?

Biogas production in waste-to-energy plants will support the decarbonization of the energy sector and enhance the EU’s energy transformation efforts. Digestates (DG) formed during the anaerobic digestion of organic wastes contain large amounts of nutrients. Their use for plant fertilization allows for diversifying and increasing the economic efficiency of farming activities. However, to avoid regional production surpluses, processing technologies allowing the acquisition of products that can be transported over long distances are required. This study therefore aimed at determining the effect of applied methods of DG treatment on the chemical composition of the resulting products and their effect on the yields and chemical composition of plants. The following digestate-based products (DGBPs) were tested: two different digestates (DGs), their liquid (LF) and solid fractions (SF) and pellets from DGs (PDG), and pellets form SFs (PSF). Results from the experiment show that during SF/LF separation of DGs, >80% of nitrogen and 87% of potassium flows to LFs, whereas >60% of phosphorus and 70% of magnesium flows to SFs. The highest yields were obtained using untreated DGs and LFs. The application of DGs and LFs was not associated with a leaching of nutrients to the environment (apparent nutrients recovery from these products exceeded 100%). Pelletized DG and SF forms can be used as slow-release fertilizer, although their production leads to significant nitrogen losses (>95%) by ammonia volatilization.

Could termites be hiding a goldmine of obscure yet promising yeasts for energy crisis solutions based on aromatic wastes? A critical state-of-the-art review

Biodiesel is a renewable fuel that can be produced from a range of organic and renewable feedstock including fresh or vegetable oils, animal fats, and oilseed plants. In recent years, the lignin-based aromatic wastes, such as various aromatic waste polymers from agriculture, or organic dye wastewater from textile industry, have attracted much attention in academia, which can be uniquely selected as a potential renewable feedstock for biodiesel product converted by yeast cell factory technology. This current investigation indicated that the highest percentage of lipid accumulation can be achieved as high as 47.25% by an oleaginous yeast strain, Meyerozyma caribbica SSA1654, isolated from a wood-feeding termite gut system, where its synthetic oil conversion ability can reach up to 0.08 (g/l/h) and the fatty acid composition in yeast cells represents over 95% of total fatty acids that are similar to that of vegetable oils. Clearly, the use of oleaginous yeasts, isolated from wood-feeding termites, for synthesizing lipids from aromatics is a clean, efficient, and competitive path to achieve "a sustainable development" towards biodiesel production. However, the lacking of potent oleaginous yeasts to transform lipids from various aromatics, and an unknown metabolic regulation mechanism presented in the natural oleaginous yeast cells are the fundamental challenge we have to face for a potential cell factory development. Under this scope, this review has proposed a novel concept and approach strategy in utilization of oleaginous yeasts as the cell factory to convert aromatic wastes to lipids as the substrate for biodiesel transformation. Therefore, screening robust oleaginous yeast strain(s) from wood-feeding termite gut system with a set of the desirable specific tolerance characteristics is essential. In addition, to reconstruct a desirable metabolic pathway/network to maximize the lipid transformation and accumulation rate from the aromatic wastes with the applications of various "omics" technologies or a synthetic biology approach, where the work agenda will also include to analyze the genome characteristics, to develop a new base mutation gene editing technology, as well as to clarify the influence of the insertion position of aromatic compounds and other biosynthetic pathways in the industrial chassis genome on the expressional level and genome stability. With these unique designs running with a set of the advanced biotech approaches, a novel metabolic pathway using robust oleaginous yeast developed as a cell factory concept can be potentially constructed, integrated and optimized, suggesting that the hypothesis we proposed in utilizing aromatic wastes as a feedstock towards biodiesel product is technically promising and potentially applicable in the near future.

Resistance of blended alkali-activated fly ash-OPC mortar to mild-concentration sulfuric and acetic acid attack

The traditional cementitious product is prone to suffer from a high degree of deterioration in the case of exposure to acid solutions because of the decomposition of the binder network. However, the degradation of concrete structures in service by mild concentrations of acid under conditions involving sewage, industrial waters, and acid rain is more common and results in a significant environmental problem. The utilization of alkali-activated materials has been seen to potentially offer an attractive option with regard to acceptable durability and a low carbon footprint. With the aid of visual observation, mass loss, compressive strength tests, X-ray diffraction, Fourier transform infrared spectroscopy, and field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy, the acid resistance of alkali-activated fly ash mortars in which the precursor was partially replaced (0-30% by mass proportion) with ordinary Portland cement (OPC) was evaluated after 180 days of exposure to mild-concentration sulfuric and acetic solutions (pH = 3). A conventional cement mortar (100% OPC) was used as a reference group. The results demonstrate that the addition of OPC into the alkali-activated system causes a significant increase in compressive strength (around 16.08-36.61%) while showing an opposite influence on durability after acid attack. Based on a linear mean value and nonlinear artificial neural network model simulation, the mass losses of the specimens were evaluated, and the alkali-activated pure-fly ash mortar demonstrated the lowest value (i.e., a maximum of 5.61%) together with the best behavior in the aspect of discreteness at 180 days. The results from microstructure analysis show that the coexistence of the N-A-S-H and C-S-H networks in the blend system occurred by both OPC hydration and FA. However, the formation of the gypsum deposition within the fly ash-OPC blend systems at sulfuric acid was found to impose internal disintegrating stresses, causing a significant area of delamination and cracks. In addition, alkali metal ion leaching, dealumination, as well as the disappearance of some crystalline phases occurred in specimens immersed in both types of acids.

Improving the humification and phosphorus flow during swine manure composting: A trial for enhancing the beneficial applications of hazardous biowastes

Improving the recovery of organic matter and phosphorus (P) from hazardous biowastes such as swine manure using acidic substrates (ASs) in conjunction with aerobic composting is of great interest. This work aimed to investigate the effects of ASs on the humification and/or P migration as well as on microbial succession during the swine manure composting, employing multivariate and multiscale approaches. Adding ASs, derived from wood vinegar and humic acid, increased the degree of humification and thermal stability of the compost. The ³¹P nuclear magnetic resonance spectroscopy and X-ray absorption near-edge structure analyses demonstrated compost P was in the form of struvite crystals, Ca/Al-P phases, and Poly-P (all inorganic P species) as well as inositol hexakisphosphate and Mono-P (organophosphorus species). However, the efficiency of P recovery could be improved by generating more struvite by adding the ASs. The flows among nutrient pools resulted from the diversity in the dominant microbial communities in different composting phases after introducing the ASs and appearance of Bacillus spp. in all phases. These results demonstrate the potential value of ASs for regulating and/or improving nutrients flow during the composting of hazardous biowastes for producing higher quality compost, which may maximize their beneficial benefits and applications.

Life cycle assessment and society willingness to pay indexes of food waste-to-energy strategies

Food waste (FW) has received increasing attention because of its immense production quantities and significance to resource and environmental impacts related to disposal approaches. We combined life cycle assessment (LCA) with society's willingness to pay (WTP) index to evaluate energy, water, and environmental impacts on three food waste-to-energy (FWTE) options in China. For anaerobic digestion (AD) mode, the results showed that 1140 MJ of energy consumption could be saved by power generation from methane, power transmission, and biodiesel production from per ton of FW; the cost of climate change for treating FW was 137.8 kg CO₂e t^-1 FW, failing to be climate-sound due to the end life of digestate in practice. The total impact to AD mode in the form of monetized value for WTP was 13.3 CNY t^-1 FW, of which the collection and transportation, pretreatment, AD reaction, wastewater treatment, biodiesel production, and residue landfilling stages contributed by 10.5%, 6.5%, 19.3%, 27.6%, 4.7%, and 75.7%, respectively, while biogas utilization offset it by 43.9%. Notably, a considerable amount of water used in AD prevented it from showing an advantage compared to incineration (-5.1 CNY t^-1 FW), which performed best overall attributing to the generated electricity compensated for primary energy demand, water, and terrestrial acidification to a great extent. Landfilling turned out to be an unappealing FW disposal method due to the low landfill gas capture ratio. Given that AD is touted for its environmental benefits, potential approaches-such as developing a reliable and supportive technology to facilitate digestate recycling into agriculture-were discussed to improve its competitiveness and attractiveness. Our study employed a way to accumulate and compare impact indicators to better interpret FW management impacts and advantages, considering energy recovery, resource recycling, and the environment.

A Glimpse of the World of Volatile Fatty Acids Production and Application: A review

Sustainable provision of chemicals and materials is undoubtedly a defining factor in guaranteeing economic, environmental, and social stability of future societies. Among the most sought-after chemical building blocks are volatile fatty acids (VFAs). VFAs such as acetic, propionic, and butyric acids have numerous industrial applications supporting from food and pharmaceuticals industries to wastewater treatment. The fact that VFAs can be produced synthetically from petrochemical derivatives and also through biological routes, for example, anaerobic digestion of organic mixed waste highlights their provision flexibility and sustainability. In this regard, this review presents a detailed overview of the applications associated with petrochemically and biologically generated VFAs, individually or in mixture, in industrial and laboratory scale, conventional and novel applications.

A review on biogas upgrading in anaerobic digestion systems treating organic solids and wastewaters via biogas recirculation

Biogas upgrading is an essential process for efficient and safe utilization of biogas produced from anaerobic digestion (AD), a cost-effective and environmentally friendly technology for bioenergy recovery from organic wastes. Biogas recirculation in AD reactors has been recently reported as a cost-effective and promising method to enhance methane content in biogas. This review aimed to summarize the state-of-the-art of biogas recirculation-based AD systems to better understand the possible mechanisms and main factors relating to in-situ biogas upgrading. It shows that biogas recirculation in the AD reactor can not only enhance methane content via both physicochemical and biological effects, but also help establish a robust AD system with high buffering capacity for highly efficient treatment of various organic wastes. More research works are demanding for a better understanding of the mechanisms and the optimization of the whole AD system, targeting its further development for high-calorie bioenergy production.

The implications of facility design and enabling policies on the economics of dry anaerobic digestion

Diverting organic waste from landfills provides significant emissions benefits in addition to preserving landfill capacity and creating value-added energy and compost products. Dry anaerobic digestion (AD) is particularly attractive for managing the organic fraction of municipal solid waste because of its high-solids composition and minimal water requirements. This study utilizes empirical data from operational facilities in California in order to explore the key drivers of dry AD facility profitability, impacts of market forces, and the efficacy of policy incentives. The study finds that dry AD facilities can achieve meaningful economies of scale with organic waste intake amounts larger than 75,000 tonnes per year. Materials handling costs, including the disposal of inorganic residuals from contaminated waste streams and post-digester mass (digestate) management, are both the largest and the most uncertain facility costs. Facilities that utilize the biogas for vehicle fueling and earn associated fuel credits collect revenues that are 4-6x greater than those of facilities generating and selling electricity and 10-12x greater than facilities selling natural gas at market prices. The results suggest important facility design elements and enabling policies to support an increased scale of organic waste handling infrastructure.

Transitioning Wastewater Treatment Plants toward Circular Economy and Energy Sustainability

Aging infrastructure, increasing environmental regulations, and receiving water environment issues stem the need for advanced wastewater treatment processes across the world. Advanced wastewater treatment systems treat wastewater beyond organic carbon removal and aim to remove nutrients and recover valuable products. While the removal of major nutrients (carbon, nitrogen, and phosphorus) is essential for environmental protection, this can only be achieved through energy-, chemical-, and cost-intensive processes in the industry today, which is an unsustainable trend, considering the global population growth and rapid urbanization. Two major routes for developing more sustainable and circular-economy-based wastewater treatment systems would be to (a) innovate and integrate energy- and resource-efficient anaerobic wastewater treatment systems and (b) enhance carbon capture to be diverted to energy recovery schemes. This Mini-Review provides a critical evaluation and perspective of two potential process routes that enable this transition. These process routes include a bioelectrochemical energy recovery scheme and codigestion of organic sludge for biogas generation in anaerobic digesters. From the analysis, it is imperative that integrating both concepts may even result in more energy- and resource-efficient wastewater treatment systems.

Solid digestate disposal strategies to reduce the environmental impact and energy consumption of food waste-based biogas systems

This study examined the environmental impacts and energy consumption of three solid digestate treatment scenarios to quantify their impacts on the entire food waste (FW)-based biogas system: (1) incineration; (2) composting, and; (3) landfill. The results showed that composting had the largest net energy consumption, but least total environmental impact of 57.3 kWh and 8.75 E-03, respectively, whereas landfill showed the opposite pattern. Moreover, there were significant differences (p < 0.05) and relatively high contributions between the digestate treatment subunits among the three scenarios. The most significant contributions of digestate subunits in methods 1-3 to the 100-year global warming potential (GWP₁₀₀) were 70.5%, 52.5%, and 103.4%, respectively. The results indicated that solid digestate treatment had a significant impact, and reasonable disposal of solid digestate could significantly reduce the environmental impacts and energy consumption of the entire FW-based biogas system.

Climate Change Impacts of Electricity Generated at a Waste-to-Energy Facility

Waste-to-energy (WTE) facilities combust both biogenic and nonbiogenic materials comprising municipal solid waste (MSW) in addition to managing waste, leading to a lack of clarity on the life cycle climate change impact (LCCCI) as an electricity generator. In order to investigate the LCCCI of this resource, a cradle-to-gate life cycle assessment (LCA) of a WTE facility in Jamesville, NY, was performed utilizing system expansion to account for avoided landfilling emissions, additional metals recycling, and the loss of potential electricity generation from landfill gas. The LCCCI of electricity from this WTE facility ranges from 0.664 to 0.951 kg CO_2eq/kWh before system expansion, which reduced the impact to -0.280 to 0.593 kg CO_2eq/kWh when accounting for avoided waste management emissions. Combustion is the leading contributor of GHG emissions from cradle-to-gate, and sensitivity analysis indicates that the nonbiogenic fraction of the waste most significantly influences the LCCCI before including cobenefits. The fraction of methane from landfills that is not captured is the most influential variable under system expansion. Before system expansion, the LCCCI of this system is comparable to that of electricity from fossil fuels. With system expansion, the LCCCI ranges from below that of renewable energy to comparable to natural gas based electricity. These results disagree with claims in the reviewed literature that WTE can avoid GHG emissions overall, although avoided emissions reduce the magnitude of its impact.

Air Pollutant Emission Rates for Dry Anaerobic Digestion and Composting of Organic Municipal Solid Waste

Dry anaerobic digestion (AD) of organic municipal solid waste (MSW) followed by composting of the residual digestate is a waste diversion strategy that generates biogas and soil amendment products. The AD-composting process avoids methane (CH₄) emissions from landfilling, but emissions of other greenhouse gases, odorous/toxic species, and reactive compounds can affect net climate and air quality impacts. In situ measurements of key sources at two large-scale industrial facilities in California were conducted to quantify pollutant emission rates across the AD-composting process. These measurements established a strong relationship between flared biogas ammonia (NH₃) content and emitted nitrogen oxides (NO_x), indicating that fuel NO_x formation is significant and dominates over the thermal or prompt NO_x pathways when biogas NH₃ concentration exceeds ∼200 ppm. Composting is the largest source of CH₄, carbon dioxide (CO₂), nitrous oxide (N₂O), and carbon monoxide (CO) emissions (∼60-70%), and dominate NH₃, hydrogen sulfide (H₂S), and volatile organic compounds (VOC) emissions (>90%). The high CH₄ contribution to CO₂-equivalent emissions demonstrates that composting can be an important CH₄ source, which could be reduced with improved aeration. Controlling greenhouse gas and toxic/odorous emissions from composting offers the greatest mitigation opportunities for reducing the climate and air quality impacts of the AD-composting process.

Cost and Life-Cycle Greenhouse Gas Implications of Integrating Biogas Upgrading and Carbon Capture Technologies in Cellulosic Biorefineries

Gaseous streams in biorefineries have been undervalued and underutilized. In cellulosic biorefineries, coproduced biogas is assumed to be combusted alongside lignin to generate process heat and electricity. Biogas can instead be upgraded to compressed biomethane and used as a transportation fuel. Capturing CO₂-rich streams generated in biorefineries can also contribute to greenhouse gas (GHG) mitigation goals. We explore the economic and life-cycle GHG impacts of biogas upgrading and CO₂ capture and storage (CCS) at ionic liquid-based cellulosic ethanol biorefineries using biomass sorghum. Without policy incentives, biorefineries with biogas upgrading systems can achieve a comparable minimum ethanol selling price (MESP) and reduced GHG footprint ($1.38/liter gasoline equivalent (LGE) and 12.9 gCO_2e/MJ) relative to facilities that combust biogas onsite ($1.34/LGE and 24.3 gCO_2e/MJ). Incorporating renewable identification number (RIN) values advantages facilities that upgrade biogas relative to other options (MESP of $0.72/LGE). Incorporating CCS increases the MESP but dramatically decreases the GHG footprint (-21.3 gCO_2e/MJ for partial, -110.7 gCO_2e/MJ for full CCS). The addition of CCS also decreases the cost of carbon mitigation to as low as $52-$78/t CO₂, depending on the assumed fuel selling price, and is the lowest-cost option if both RIN and California's Low Carbon Fuel Standard credits are incorporated.