Selective Removal of Phenolic Compounds by Peroxydisulfate Activation: Inherent Role of Hydrophobicity and Interface ROS

Sustainable electro-Fenton simultaneous reduction of Cr (VI) and degradation of organic pollutants via dual-site porous carbon cathode driving uncoordinated molybdenum sites conversion

Simultaneous removal of heavy metals and organic contaminants remains a substantial challenge in the electro-Fenton (EF) system. Herein, we propose a facile and sustainable "iron-free" EF system capable of simultaneously removing hexavalent chromium (Cr (VI)) and para-chlorophenol (4-CP). The system comprises a nitrogen-doped and carbon-deficient porous carbon (dual-site NPC-D) cathode coupled with a MoS2 nanoarray promoter (MoS2 NA). The NPC-D/MoS2 NA system exhibits exceptional synergistic electrocatalytic activity, with removal rates for Cr (VI) and 4-CP that are 20.3 and 4.4 times faster, respectively, compared to the NPC-D system. Mechanistic studies show that the dual-site structure of NPC-D cathode favors the two-electron oxygen reduction pathway with a selectivity of 81 %. Furthermore, an electric field-driven uncoordinated Mo valence state conversion of MoS2 NA enchances the generation of dynamic singlet oxygen and hydroxyl radicals. Notably, this system shows outstanding recyclability, resilience in real wastewater, and sustainability during a 3 L scale-up operation, while effectively mitigating toxicity. Overall, this study presents an effective approach for treating multiple-component wastewater and highlights the importance of structure-activity correlation in synergistic electrocatalysis.

Enhanced degradation of reactive black 5 via persulfate activation by natural bornite: influencing parameters, mechanism and degradation pathway

Reactive black 5 (RBk5) is a refractory azo dye that constitutes a serious threat to the environment and humans. Herein, natural bornite (Nbo) was utilized to activate persulfate (PDS) for the RBk5 removal. The particle size of the Nbo catalyst was optimized and the RBk5 degradation rate constant that responded positively to the particle size of the Nbo catalyst was exhibited. Then, the operational factors affecting RBk5 removal were comprehensively investigated. With the addition of 1.5 g L-1 Nbo and 1.5 mM PDS, 99.05% of the RBk5 (20 mg L-1) was removed in 150 min compared with 0.46% removal with PDS only, which was caused by the additional reactive oxygen species (ROS) produced by the synergistic action of Fe-Cu bimetallic metal and reductive sulfur species. The Nbo catalyst presented high stability and reusability toward RBk5 removal. Identification of reactive oxygen species revealed that SO 4 ⋅ - , ·OH, O 2 ⋅ - and 1O2 collectively participated in RBk5 removal. Additionally, a possible degradation pathway for RBk5 was proposed, including cleavage of the azo, C-S and S-O bonds, hydroxylation, hydrolyzation, direct oxidation and other pathways. This work developed a highly effective and low-cost natural mineral-based bimetallic sulfide material for PDS activation for the degradation of contaminants and environmental remediation.

Mediated Peroxymonosulfate Activation at the Single Atom Fe-N3O1 Sites: Synergistic Degradation of Antibiotics by Two Non-Radical Pathways

The activation of persulfates to degrade refractory organic pollutants is a hot issue in advanced oxidation right now. Here, it is reported that single-atom Fe-incorporated carbon nitride (Fe-CN-650) can effectively activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. Through some characterization techniques and DFT calculation, it is proved that Fe single atoms in Fe-CN-650 exist mainly in the form of Fe-N3O1 coordination, and Fe-N3O1 exhibited better affinity for PMS than the traditional Fe-N4 structure. The degradation rate constant of SMX in the Fe-CN-650/PMS system reached 0.472 min-1, and 90.80% of SMX can still be effectively degraded within 10 min after five consecutive recovery cycles. The radical quenching experiment and electrochemical analysis confirm that the pollutants are mainly degraded by two non-radical pathways through 1O2 and Fe(IV)═O induced at the Fe-N3O1 sites. In addition, the intermediate products of SMX degradation in the Fe-CN-650/PMS system show toxicity attenuation or non-toxicity. This study offers valuable insights into the design of carbon-based single-atom catalysts and provides a potential remediation technology for the optimum activation of PMS to disintegrate organic pollutants.

Enhanced Selective Degradation of Pharmaceutical and Personal Care Products by β-Cyclodextrin-Decorated ZIF-67 Nanocomposites in Reclaimed Water

A peroxymonosulfate oxidation system was developed via modification of β-cyclodextrin (β-CD) on the surface of Fe2+-doped ZIF-67 (CD/Fe@ZIF-67) as an activator. The 99.7% carbamazepine, 91.3% bisphenol A (BPA), and 95.4% diclofenac (DCF) degradation efficiency were achieved within 10 min, 60, and 1 min, respectively. The hydrophobicity of these three pollutants is positively correlated with their adsorption kinetic constants by CD/Fe@ZIF-67 due to the introduction of β-CD. Scavenger experiments and electron spin resonance spectra confirmed that carbamazepine was preferentially oxidized by SO4•- [λ(SO4•-)(70.5%) > λ(•OH)(28.2%) > λ(O2•-)(1.3%)], where SO4•- and O2•- played dominant roles in the degradation of BPA [λ(SO4•-)(71.7%) > λ(O2•-)(22.8%) > λ(•OH)(5.5%)], and O2•- was responsible for DCF removal [λ(O2•-) = 93.2%]. Additionally, the particulate catalyst was immobilized in the shell side of a ceramic membrane in a membrane reactor for catalyst recovery. This reactor achieved nearly 100% removal efficiency under optimal conditions: 0.036 wt % catalyst loading, 0.5 mM peroxymonosulfate concentration, 1 L inflow, 10 mg/L initial carbamazepine concentration, and 0.012 L/min hydraulic retention time. In summary, this study elucidates the active role of β-CD in a polymetallic/peroxymonosulfate system and provides valuable insights into the development of effective oxidation methods for pharmaceutical and personal care products in wastewater.

Direct Electron Transfer-Driven Nontoxic Oligomeric Deposition of Sulfonamide Antibiotics onto Carbon Materials for In Situ Water Remediation

The rising in situ chemical oxidation (ISCO) technologies based on polymerization reactions have advanced the removal of emerging contaminants in the aquatic environment. However, despite their promise, uncertainties persist regarding their effectiveness in eliminating structurally complex contaminants, such as sulfonamide antibiotics (SAs). This study elucidated that oligomerization, rather than mineralization, predominantly governs the removal of SAs in the carbon materials/periodate system. The amine groups in SAs played a crucial role in forming organic radicals and subsequent coupling reactions due to their high f- index and low bond orders. Moreover, the study highlighted the robust adhesion of oligomers to the catalyst surface, facilitated by enhanced van der Waals forces and hydrophobic interactions. Importantly, plant and animal toxicity assessments confirmed the nontoxic nature of oligomers deposited on the carbon material surface, affirming the efficacy of carbon material-based ISCO in treating contaminated surface water and groundwater. Additionally, a novel classification approach, Δlog k, was proposed to differentiate SAs based on their kinetic control steps, providing deeper insights into the quantitative structure-activity relationship (QSAR) and facilitating the selection of optimal descriptors during the oligomerization processes. Overall, these insights significantly enhance our understanding of SAs removal via oligomerization and demonstrate the superiority of C-ISCO based on polymerization in water decontamination.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

pH-modulated oxidation of organic pollutants for water decontamination: A deep insight into reactivity and oxidation pathway

Solution pH is one of the primary factors affecting the efficiency of water decontamination. Although the influence of pH on oxidants activation, catalyst activity, and reactive oxygen species have been widely explored, there is still a scarcity of systemic studies on the changes in the oxidation behavior of organic pollutants at different pH levels. Herein, we report the influence laws of pH on the forms, reactivities, active sites, degradation pathways, and products toxicities of organic pollutants. Changes in pH cause the protonation or deprotonation of organic pollutants and further affect their forms and chemistry (e.g., electrostatic force, hydrophobicity, and oxidation potential). The oxidation potential of organic pollutants follows the order: protonated form > pristine form > deprotonated form. Moreover, protonation or deprotonation can modify the active sites and degradation pathways of organic pollutants, wherein deprotonation renders them more susceptible to electrophilic attack, while protonation reduces their activity against electrophilic and nucleophilic attacks. Additionally, pH adjustments can modify the degradation pathway and the toxicity of transformation products. Overall, pH changes can affect the oxidation fate of organic pollutants by altering their structure, which distinguishes it from the effect of pH on oxidants or oxidant activation processes.

Unveiling the activity difference cause and ring-opening reaction routes of typical radicals induced degradation of toluene

This study employs five UV-AOPs (PMS, PDS, H2O2, NaClO and NaClO2) to produce radicals (•OH, SO4•-, ClO•, O2•- and 1O2) and further comparatively studies their activity sequence and activity difference cause in toluene degradation. The toluene mineralization efficiency as a descending order is 73 % (UV-PMS) > 71 % (UV-PDS) > 70 % (acidified-UV-NaClO) > 55 % (UV-H2O2) > 36 % (UV-NaClO) > 35 % (UV-NaClO2); that of conversion efficiency is 99 % (acidified-UV-NaClO) > 95 % (UV-PMS) > 90 % (UV-PDS) > 74 % (UV-H2O2) > 44 % (UV-NaClO) > 41 % (UV-NaClO2). Acidic pretreatment significantly boosts the reactivity of UV-NaClO. ESR combined with radical quenching tests reveals the radicals' generation and evolution, and their contribution rates to toluene conversion, i.e. ClO• > SO4•- > O2•- > 1O2 > •OH. Theoretical calculations further unveil the ring-opening reaction routes and the nature of the activity difference of different radicals. The minimum energy required for ring-opening reaction is 116.77, 150.63, 168.29 and 191.92 kJ/mol with respect to ClO•, SO4•-, 1O2 and •OH, and finding that the ClO•-HO• pair is the best for toluene mineralization. The difficulty for eliminating typical VOCs by using UV-AOPs method is determined as toluene > chlorobenzene > benzene > ethyl acetate.

Oxygen-containing functional groups in Fe3O4@three-dimensional graphene nanocomposites for enhancing H2O2 production and orientation to 1O2 in electro-Fenton

In electro-Fenton (EF), development of a bifunctional electrocatalyst to realize simultaneous H2O2 generation and activation efficiently for generating reactive species remains a challenge. In particular, a nonradical-mediated EF is more favorable for actual wastewater remediation, and deserves more attention. In this study, three-dimensional graphene loaded with Fe3O4 nanoparticles (Fe3O4@3D-GNs) with abundant oxygen-containing functional groups (OFGs) was synchronously synthesized using a NaCl-template method and served as a cathode to establish a highly efficient and selective EF process for contaminant degradation. The amounts of OFGs can be effectively modulated via the pyrolysis temperature to regulate the 2e- oxygen reduction reaction activity and reactive oxygen species (ROS) production. The optimized Fe3O4@3D-GNs synthesized at 750 °C (Fe3O4@3D-GNs-750) with the highest -C-O-C and -C꞊O group ratios exhibited the maximum H2O2 and 1O2 yields during electrocatalysis, thus showing remarkable versatility for eliminating organic contaminants from surface water bodies. Experiments and theoretical calculations have demonstrated the dominant role of -C-O-C in generating H2O2 and the positive influence of -C꞊O sites on the production of 1O2. Moreover, the surface-bound Fe(II) favors the generation of surface-bound •OH, which steers a more favorable oxidative conversion of H2O2 to 1O2. Fe3O4@3D-GNs were proven to be less pH-dependent, low-energy, stable, and recyclable for practical applications in wastewater purification. This study provides an innovative strategy to engineer active sites to achieve the selective electrocatalysis for eliminating pollution and reveals a novel perspective for 1O2-generation mechanism in the Fenton reaction.

The Application of Metal-Organic Frameworks in Water Treatment and Their Large-Scale Preparation: A Review

Over the last few decades, there has been a growing discourse surrounding environmental and health issues stemming from drinking water and the discharge of effluents into the environment. The rapid advancement of various sewage treatment methodologies has prompted a thorough exploration of promising materials to capitalize on their benefits. Metal-organic frameworks (MOFs), as porous materials, have garnered considerable attention from researchers in recent years. These materials boast exceptional properties: unparalleled porosity, expansive specific surface areas, unique electronic characteristics including semi-conductivity, and a versatile affinity for organic molecules. These attributes have fueled a spike in research activity. This paper reviews the current MOF-based wastewater removal technologies, including separation, catalysis, and related pollutant monitoring methods, and briefly introduces the basic mechanism of some methods. The scale production problems faced by MOF in water treatment applications are evaluated, and two pioneering methods for MOF mass production are highlighted. In closing, we propose targeted recommendations and future perspectives to navigate the challenges of MOF implementation in water purification, enhancing the efficiency of material synthesis for environmental stewardship.

From nano- to macroarchitectures: designing and constructing MOF-derived porous materials for persulfate-based advanced oxidation processes

Persulfate-based advanced oxidation processes (PS-AOPs) have gained significant attention as an effective approach for the elimination of emerging organic contaminants (EOCs) in water treatment. Metal-organic frameworks (MOFs) and their derivatives are regarded as promising catalysts for activating peroxydisulfate (PDS) and peroxymonosulfate (PMS) due to their tunable and diverse structure and composition. By the rational nanoarchitectured design of MOF-derived nanomaterials, the excellent performance and customized functions can be achieved. However, the intrinsic fine powder form and agglomeration ability of MOF-derived nanomaterials have limited their practical engineering application. Recently, a great deal of effort has been put into shaping MOFs into macroscopic objects without sacrificing the performance. This review presents recent advances in the design and synthetic strategies of MOF-derived nano- and macroarchitectures for PS-AOPs to degrade EOCs. Firstly, the strategies of preparing MOF-derived diverse nanoarchitectures including hierarchically porous, hollow, yolk-shell, and multi-shell structures are comprehensively summarized. Subsequently, the approaches of manufacturing MOF-based macroarchitectures are introduced in detail. Moreover, the PS-AOP application and mechanisms of MOF-derived nano- and macromaterials as catalysts to eliminate EOCs are discussed. Finally, the prospects and challenges of MOF-derived materials in PS-AOPs are discussed. This work will hopefully guide the design and development of MOF-derived porous materials in SR-AOPs.

Transformative Removal of Aqueous Micropollutants into Polymeric Products by Advanced Oxidation Processes

This perspective presents the latest advancements in selective polymerization pathways in advanced oxidation processes (AOPs) for removal of featured organic pollutants in wastewater. In radical-based homogeneous reactions, SO4• --based systems exhibit superior oxidative activity toward aromatics with electron-donating substituents via single electron transfer and radical adduct formation (RAF). The produced organic radical cations subsequently undergo coupling and polymerization reactions to produce polymers. For •OH-based oxidation, metal ions facilitate the production of monomer radicals via RAF. Additionally, heterogeneous catalysts can mediate both coupling and polymerization reactions via persulfate activation without generating inorganic radicals. Metal-based catalysts will mediate a direct oxidation pathway toward polymerization. In contrast, carbon-based catalysts will induce coupling reactions to produce low-molecular-weight oligomers (≤4 units) via an electron transfer process. In comparison to mineralization, polymerization pathways remarkably reduce peroxide usage, quickly separate pollutants from the aqueous phase, and generate polymeric byproducts. Thus, AOP-driven polymerization systems hold significant promise in reducing carbon emission and realizing carbon recycling in water treatment processes.

Green rGO/FeNPs nanocomposites activated peroxydisulfate for the removal of mixed 17β-estradiol and estriol

Reduced graphene oxide/iron nanoparticles (rGO/FeNPs) synthesized by the chemical method have been used in Fenton oxidation of organic contaminants, yet little is known about biosynthesized rGO/FeNPs using green tea extract (GT) as how to activate persulfate in sulfate radical-based advanced oxidation processes. In this study, rGO/FeNPs were used to activate peroxydisulfate (PDS) for 17β-estradiol (βE2) and estriol (E3) removal. The rGO/FeNPs-PDS system removed 83.6% of βE2 and 62.5% of E3 within 240 min, which was confirmed by a combination of adsorption and degradation via both radical and non-radical pathways. Four main reactive species in βE2 and E3 degradation were observed, i.e., hydroxyl radical (·OH), sulfate radical (SO4·-), singlet oxygen (1O2) and electron transfer, with the respective contributions of ·OH (32.9 and 34.7%), SO4·- (16.1 and 19.7%), 1O2 (12.2 and 14.1%) and electron transfer (8.0 and 7.2%). Analysis of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Electron Paramagnetic Resonance (EPR) and electrochemical measurements all indicated that beside the well-known role of Fe, CO from rGO through the generation of ·OH, SO4·-, 1O2 and electron transfer, as well as GT through electron transfer also participated in the activation of PDS. Finally, the degradation pathways of βE2/E3 were proposed. Overall, this study provides a new insight into the biosynthesis of rGO/FeNPs to activate PDS for the oxidation of mixed emerging contaminants.

Origins of Selective Oxidation in Carbon-Based Nonradical Oxidation Processes toward Organic Pollutants: Quantitative Structure-Activity Relationships (QSARs)

Metal-free carbon material-mediated nonradical oxidation processes (C-NOPs) have emerged as a research hotspot due to their excellent performance in selectively eliminating organic pollutants in aqueous environments. However, the selective oxidation mechanisms of C-NOPs remain obscure due to the diversity of organic pollutants and nonradical active species. Herein, quantitative structure-activity relationship (QSAR) models were employed to unveil the origins of C-NOP selectivity toward organic pollutants in different oxidant systems. QSAR analysis based on adsorption and oxidation descriptors revealed that C-NOP selectivity depends on the oxidation potentials of organic pollutants rather than on adsorption interactions. However, the dominance of electronic effects in selective oxidation decreases with increasing structural complexity of organic pollutants. Moreover, the oxidation threshold solely depends on the inherent electronic nature of organic pollutants and not on the reactivity of nonradical active species. Notably, the accuracy of substituent descriptors (Hammett constants) and theoretical descriptors (e.g., highest occupied molecular orbital energy, ionization potential, and single-electron oxidation potential) is significantly influenced by the complexity and molecular state of organic pollutants. Overall, the study findings reveal the origins of organic pollutant-oriented selective oxidation and provide insight into the application of descriptors in QSAR analysis.

Understanding the Distance Effect of the Single-Atom Active Sites in Fenton-Like Reactions for Efficient Water Remediation

Emerging single-atom catalysts (SACs) are promising in water remediation through Fenton-like reactions. Despite the notable enhancement of catalytic activity through increasing the density of single-atom active sites, the performance improvement is not solely attributed to the increase in the number of active sites. The variation of catalytic behaviors stemming from the increased atomic density is particularly elusive and deserves an in-depth study. Herein, single-atom Fe catalysts (FeSA-CN) with different distances (dsite) between the adjacent single-atom Fe sites are constructed by controlling Fe loading. With the decrease in dsite value, remarkably enhanced catalytic activity of FeSA-CN is realized via the electron transfer regime with peroxymonosulfate (PMS) activation. The decrease in dsite value promotes electronic communication and further alters the electronic structure in favor of PMS activation. Moreover, the two adjacent single-atom Fe sites collectively adsorb PMS and achieve single-site desorption of the PMS decomposition products, maintaining continuous PMS activation and contaminant removal. Moreover, the FeSA-CN/PMS system exhibits excellent anti-interference performance for various aquatic systems and good durability in continuous-flow experiments, indicating its great potential for water treatment applications. This study provides an in-depth understanding of the distance effect of single-atom active sites on water remediation by designing densely populated SACs.

Development of natural attapulgite derived ferromanganese spinel oxides as heterogeneous catalysts for persulfate activation of tetracycline degradation

Ferromanganese spinel oxides (MnFe2O4, MFO) have been proven effective in activating persulfate for pollutants removal. However, their inherent high surface energy often leads to agglomeration, diminishing active sites and consequently restricting catalytic performance. In this study, using Al-MCM-41 (MCM) mesoporous molecular sieves derived from natural attapulgite as a support, the MFO/MCM composite was synthesized through dispersing MnFe2O4 nanoparticles on MCM carrier by a simple hydrothermal method, which can effectively activate persulfate (PS) to degrade Tetracycline (TC). The addition of Al-MCM-41 can effectively improve the specific surface area and adsorption performance of MnFe2O4, but also reduce the leaching amount of metal ions. The MFO/MCM composite exhibited superior catalytic reactivity towards PS and 84.3% removal efficiency and 64.7% mineralization efficiency of TC (20 mg/L) was achieved in 90 min under optimized conditions of 0.05 mg/L catalyst dosage, 5 mM PS concentration, room temperature and no adjustment of initial pH. The effects of various stoichiometric MFO/MCM ratio, catalyst dosage, PS concentration, initial pH value and co-existing ions on the catalytic performance were investigated in detail. Moreover, the possible reaction mechanism in MFO-MCM/PS system was proposed based on the results of quenching tests, electron paramagnetic resonance (EPR) and XPS analyses. Finally, major degradation intermediates of TC were detected by liquid chromatography mass spectrometry technologies (LC-MS) and four possible degradation pathways were proposed. This study enhances the design approach for developing highly efficient, environmentally friendly and low-cost catalysts for the advanced treatment process of antibiotic wastewater.

Using waste to treat waste: facile synthesis of hollow carbon nanospheres from lignin for water decontamination

Lignin, the most abundant natural material, is considered as a low-value commercial biomass waste from paper mills and wineries. In an effort to turn biomass waste into a highly valuable material, herein, a new-type of hollow carbon nanospheres (HCNs) is designed and synthesized by pyrolysis of biomass dealkali lignin, as an efficient nanocatalyst for the elimination of antibiotics in complex water matrices. Detailed characterization shows that HCNs possess a hollow nanosphere structure, with abundant graphitic C/N and surface N and O-containing functional groups favorable for peroxydisulfate (PDS) activation. Among them, HCN-500 provides the maximum degradation rate (95.0%) and mineralization efficiency (74.4%) surpassing those of most metal-based advanced oxidation processes (AOPs) in the elimination of oxytetracycline (OTC). Density functional theory (DFT) calculations and high-resolution mass spectroscopy (HR-MS) were employed to reveal the possible degradation pathway of OTC elimination. In addition, the HCN-500/PDS system is also successfully applied to real antibiotics removal in complex water matrices (e.g. river water and tap water), with excellent catalytic performances.

Significantly Accelerated Photochemical Perfluorooctanoic Acid Decomposition at the Air-Water Interface of Microdroplets

The efficient elimination of per- and polyfluoroalkyl substances (PFASs) from the environment remains a huge challenge and requires advanced technologies. Herein, we demonstrate that perfluorooctanoic acid (PFOA) photochemical decomposition could be significantly accelerated by simply carrying out this process in microdroplets. The almost complete removal of 100 and 500 μg/L PFOA was observed after 20 min of irradiation in microdroplets, while this was achieved after about 2 h in the corresponding bulk phase counterpart. To better compare the defluorination ratio, 10 mg/L PFOA was used typically, and the defluorination rates in microdroplets were tens of times faster than that in the bulk phase reaction system. The high performances in actual water matrices, universality, and scale-up applicability were demonstrated as well. We revealed in-depth that the great acceleration is due to the abundance of the air-water interface in microdroplets, where the reactants concentration enrichment, ultrahigh interfacial electric field, and partial solvation effects synergistically promoted photoreactions responsible for PFOA decomposition, as evidenced by simulated Raman scattering microscopy imaging, vibrational Stark effect measurement, and DFT calculation. This study provides an effective approach and highlights the important roles of air-water interface of microdroplets in PFASs treatment.

Cyano-Regulated Organic Polymers for Highly Efficient Photocatalytic H2 O2 Production in Various Actual Water Bodies

Photocatalytic production of H2 O2 has drawn significant attention in recent years, but the yield rate of current photocatalytic systems is still unsatisfactory. Moreover, the presence of various components in actual water bodies will consume the photogenerated charges and deactivate the catalyst, severely limiting the real applications of photocatalytic H2 O2 production. Herein, a cyano-modified polymer photocatalyst is synthesized by Knoevenagel condensation with subsequent thermal polymerization. The introduction of cyano group and sulfer (S), oxygen (O) elements modulates the microstructure and energy band of the polymer catalyst, and the cyano group sites can effectively adsorb and activate O2 , realizing the generation of H2 O2 in the two-step single-electron oxygen reduction process. The reported system achieves high H2 O2 generation rate up to 1119.2 µmol g-1 h-1 in various water bodies including tap water, river water, seawater, and secondary effluent. This simple and readily available catalyst demonstrates good anti-interference performance and pH adaptability in photocatalytic H2 O2 production in actual water bodies, and its photodegradation and sterilization applications are also demonstrated. This study offers new insights in developing polymer catalysts for efficient photocatalytic production of H2 O2 in various water bodies for practical application.

Insight into the selection of oxidant in persulfate activation system: The effect of the target pollutant properties

As a rising branch of advanced oxidation processes, persulfate activation has attracted growing attention. Unlike catalysts that have been widely studied, the selection of persulfate is previously overlooked. In this study, the affecting factors of persulfates were studied. The effect of target pollutant properties on superior persulfate species (the species with a higher degradation efficiency) was investigated by multiwalled carbon nanotube (MWCNT)/persulfate catalytic systems. Innovatively, the EHOMO (or vertical ionization potential (VIP)) value of the target pollutant was proposed to be an index to judge the superior persulfate species, and the threshold is VIP= 6.397-6.674 eV, EHOMO= -8.035∼- 7.810 eV, respectively. To be specific, when the VIP of phenolic compounds is higher (or EHOMO of phenolic compounds is lower) than the threshold, the catalytic performance of peroxymonosulfate would be higher than that of peroxydisulfate. Moreover, the effects of coexisting cations on peroxydisulfate superior species were further investigated. It was illustrated that the hydrated cation radius of coexisting cations would influence the pollutant degradation efficiency under some circumstances. This study provides a new approach to improve the cost of persulfate activation systems and promotes the underlying downstream application of persulfate activation systems.

Selective and nonselective removal of hydrophobic compounds by coupling engineered FeOCl in a cathode-anode synergistic electrochemical platform

Efficient and selective removal of water pollutants remains a critical challenge. Here, we addressed this challenge by ingeniously engineering FeOCl via polyaniline intercalation and dodecyl group modification (FeOCl-P-S) to improve its activity and selectivity for the in situ removal of hydrophobic phenolic compounds. We further encapsulated the catalyst inside commercial cheap corundum balls and developed a "millimeter-scale reactor", which maintained a high efficiency of 86.02% after ten cycles with negligible physical changes. Moreover, we established the synergy between anodic (generating H+, O2, and IrO3) and cathodic reactions (utilizing H+ and O2) for H2O2 generation and direct anodic oxidation, an unexplored process, in a vertical bidirectional gas diffusion electrochemical system (VB-GDE). By combining the "reactor" and VB-GDE, we constructed a new platform for selective and nonselective continuous pollutant oxidation in a self-sustaining acidic environment with minimal chemical residues. This work presents a promising electrochemical technology for the efficient and selective removal of water pollutants.

Spin state-dependent in-situ photo-Fenton-like transformation from oxygen molecule towards singlet oxygen for selective water decontamination

The development of 1O2-dominanted selective decontamination for water purification was hampered by extra H2O2 consumption and poor 1O2 generation. Herein, we proposed the reconstruction of Fe spin state using near-range N atom and long-range N vacancies to enable efficient generation of H2O2 and sequential activation of H2O2 into 1O2 after visible-light irradiation. Theoretical and experimental results revealed that medium-spin Fe(III) strengthened O2 adsorption, penetrated eg electrons to antibonding p-orbital of oxygen, and lowered the free energy of O2 activation, enabling the oxygen protonation for H2O2 generation. Thereafter, the electrons of H2O2 could be extracted by low-spin Fe(III) and rapidly converted into 1O2 in a nonradical path. The developed 1O2-dominated in-situ photo-Fenton-like system had an excellent pH universality and anti-interference to inorganic ions, dissolved organic matter, and even real water matrixes (e.g., tap water and secondary effluent). This work provided a novel insight for sustainable and efficient 1O2 generation, which motivated the development of new-generation selective water treatment technology.

Selective Removal of Organic Pollutants in Groundwater and Surface Water by Persulfate-Assisted Advanced Oxidation: The Role of Electron-Donating Capacity

The efficiency of persulfate-assisted advanced oxidation processes (PS-AOPs) in degrading organic pollutants is affected by the electron-donating capability of organic substances present in the water source. In this study, we systematically investigate the electron-donating capacity (EDC) difference between groundwater and surface water and demonstrate the dependence of removal efficiency on the EDC of target water by PS-AOPs with carbon nanotubes (CNTs) as a catalyst. Laboratory analyses and field experiments reveal that the CNT/PS system exhibits higher performance in organic pollutant removal in groundwater with a high concentration of phenols, compared to surface water, which is rich in quinones. We attribute this disparity to the selective electron transfer pathway induced by potential difference between PS-CNT and organic substance-CNT intermediates, which preferentially degrade organic substances with stronger electron-donating capability. This study provides valuable insights into the inherent selective removal mechanism and application scenarios of electron transfer process-dominated PS-AOPs for water treatment based on the electron-donating capacity of organic pollutants.

Selective degradation of organic micropollutants by activation of peroxymonosulfate by Se@NC: Role of Se doping and nonradical pathway mechanism

In this study, Se@NC-x decorated with Se was successfully prepared via two-step calcination with zeolitic imidazole framework (ZIF) as a precursor. Mechanistic studies show that PMS would be adsorbed onto the surface of Se@NC-900 to form an active complex (Se@NC-900/PMS*), and the active Se@NC-900/PMS* could oxidize phenol by the rapid decomposition of PMS. Specifically, electrons are extracted by Se@NC-900/PMS* and then transferred to the surface of Se@NC-900, which can trigger the degradation of phenol. Notably, it is found that the local charge redistribution caused by the doping of Se can activate the catalytic potential of the intrinsically inert carbon skeleton through density flooding theory (DFT) calculations. The XLogP, ΔE, VIP, and E_{LUMO (Se@NC/PMS)-HOMO (pollutants)} and degradation rate constants of different micropollutants were correlated well linearly. This indicates that the Se@NC-900/PMS system has a great selectivity for the degradation of pollutants. Overall, these findings not only illustrate the role of Se in tuning the electronic structure of Se@NC-x to enhance the activation of PMS, but also bridge the gap in our knowledge about the physicochemical properties and degradation performance of Se@NC catalysts.

Carbon-defect-driven persulfate activation for highly efficient degradation of extracellular DNA contaminant: Radical oxidation and electron transfer pathways

Extracellular DNA (eDNA), as a dynamic repository for antibiotic-resistant genes (ARGs), is a rising threat to public health. This work used a ball-milling method to enhance defect structures of activated carbon, and carbon defects exhibited an excellent capacity in persulfate (PS) activation for model eDNA and real ARGs degradation. The eDNA removal by defect-rich carbon with PS was 2.3-fold higher than that by unmilled activated carbon. The quenching experiment, electrochemical analysis and thermodynamic calculation showed that carbon defects could not only enhance the generation of SO₄^•- and ^•OH, but formed an electron transfer bridge between eDNA and PS, leading to the non-radical oxidation of eDNA. According to molecular calculations, the nitrogenous bases of DNA were the easiest sites to be oxidized by electron transfer pathway. This research offers a new way using defective carbon materials as PS activator for eDNA pollutants, and an insight into the non-radical mechanism of eDNA degradation.

3D variable Co species carbon foam enhanced reactive oxygen species generation and ensured long-term stability for water purification

Cobalt (Co) and oxides are the most common catalysts for activating peroxymonosulfate (PMS). However, practical applications of Co-based PMS-advanced oxidation processes are difficult to realize the degradation of the targeted pollutants due to poor yield of reactive oxygen species (ROS) and inaccessible active sites. Here, we designed 3D oxygen vacancy-rich (V_o-rich) variable Co species@carbon foam (Co_xO_y@CF) via coupling solvent-free and pyrolysis strategies for degrading tetracycline by PMS activation. The kinetic rate of optimized (Co@CoO) Co_xO_y@CF-1.0 (1.0 presented the molar ratio of Co²⁺ and 2-methylimidazole) enhanced by an order of magnitude compared to that of ZIFs derivatives (ZIFs-500) (0.073 vs 0.155 min^-1) due to the special structure. The flow-through unit maintained over 90% removal within 12 h, which was far better than that of ZIFs-500/PMS system. We used electrochemical analysis, quenching experiment, in-situ FTIR and Raman spectra to further investigate the possible mechanism of the 3D Co_xO_y@CF-1.0/PMS system. 3D Co_xO_y@CF-1.0 stimulated the production of the metastable catalyst-PMS* complex obtained O₂^- as intermediates accompanied by the redox cycling of Co²⁺/Co³⁺, which created the dominant ROS (more ¹O₂) in the presence of V_o, which was completely different for ZIFs-500/PMS with coordinated and dominant radical and non-radical pathways. This study could large-scale generate variable cobalt-based catalysts for enhanced ROS generation, leading the new insight for boosting practical applications.

Single atom Mn anchored on N-doped porous carbon derived from spirulina for catalyzed peroxymonosulfate to degradation of emerging organic pollutants

Highly efficient single atom catalysts are critical to substantially promote for peroxymonosulfate (PMS) activation to organic pollutant degradation, but it remains a challenge at present. Herein, single atom Mn anchored on N-doped porous carbon (SA-Mn-NSC) was synthesized by ball milling of Mn-doped carbon nitride and spirulina biochar to dominantly activate PMS. The precursor of carbon nitride and spirulina possessed a strong coordinating capability for Mn(II), facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (Mn-N₄). The SA-Mn-NSC catalyst exhibited high activity and stability in the heterogeneous activation of PMS to degrade a wide range of pollutants within 10 min, showing an outstanding degradation rate constant of 0.31 min^-1 in enrofloxacin (ENR) degradation. The high surface density of Mn-N₄ sites and abundant interconnected meso-macro pores were highly favorable for activating PMS to produce ¹O₂ and high-valent manganese (Mn(IV)) for pollutant degradation. This work offers a new pathway of using a low-cost and easily accessible single-atom catalysts (SACs) and could inspire more catalytic oxidation strategies.

Covalent organic frameworks@ZIF-67 derived novel nanocomposite catalyst effectively activated peroxymonosulfate to degrade organic pollutants

Metal organic frameworks-Covalent organic frameworks (MOFs-COFs) nanocomposites could improve the catalytic performance. Herein, a novel nanocomposite catalyst (CC@Co₃O₄) derived from MOFs-COFs (COF@ZIF-67) was prepared on peroxymonosulfate (PMS) activation for bisphenol A (BPA) and rhodamine B (RhB) degradation. Owing to the Co species, oxygen vacancy (O_V), surface hydroxyl (-OH), graphite N and ketone groups (C=O), the CC@Co₃O₄ exhibited higher catalytic degradation performance and total organic carbon (TOC) for BPA (93.8% and 22.3%) and RhB (98.2% and 82.5%) with a small quantity of catalyst (0.10 g/L) and low concentration of PMS (0.20 g/L) even without pH adjustment. Sulfate radicals (•SO₄^-), hydroxyl radicals (•OH), single oxygen (¹O₂), superoxide radicals (•O₂^-) and electron transfer process were all involved in the degradation of BPA and RhB. Among them, the degradation of BPA and RhB mainly depended on •O₂^- and ¹O₂, respectively. Meanwhile, the degradation pathways of BPA and RhB were proposed, and the biotoxicity of the degradation products was evaluated by freshwater chlorella. The results illustrated that the degradation products were environmentally friendly to organisms. In addition, the role of COF in the nanocomposites was also studied. The addition of COF remarkably improved the catalytic performance of CC@Co₃O₄ due to the faster electron transfer, more graphite N and C=O. Overall, this work may open the door to the development of COF-based catalysts in the field of water pollutant remediation.

Efficient Activation of Peroxymonosulfate by V-Doped Graphitic Carbon Nitride for Organic Contamination Remediation

Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been developed as an ideal pathway for completely eradication of recalcitrant organic pollutants from water environment. Herein, the V-doped graphitic carbon nitride (g-C₃N₄) is rationally fabricated by one-step thermal polymerization method to activate PMS for contamination decontamination. The results demonstrate the V atoms are successfully integrated into the framework of g-C₃N₄, which can effectively improve light absorption intensity and enhance charge separation. The V-doped g-C₃N₄ displays superior catalytic performance for PMS activation. Moreover, the doping content has a great influence on the activation performances. The radical quenching experiments confirm •O₂^-, SO₄^•-, and h⁺ are the significant species in the catalytic reaction. This work would provide a feasible strategy to exploit efficient g-C₃N₄-based material for PMS activation.

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar for enhancing the degradation of sulfathiazole antibiotics by peroxymonosulfate and its effects on bacterial community dynamics

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar (denoted as N-CSBC, O-CSBC, and B-CSBC, respectively) were fabricated in a one-step pyrolysis process to promote peroxymonosulfate (PMS) activation for the elimination of sulfathiazole (STZ) from aquaculture water. B-CSBC exhibited remarkably high catalytic activity with 92% of STZ degradation in 30 min attributed to the presence of meso-/micro-pores and B-containing functional groups (including B-N, B-C, and B₂O₃ species). Radical quenching tests revealed SO₄^•-, HO•, and ¹O₂ being the major electron acceptors contributing to STZ removal by PMS over B-CSBC catalyst. The B-CSBC catalyst has demonstrated high sustainability in multiple consecutive treatment cycles. High salinity and the presence of inorganic ions such as chloride, enhanced the performance of the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOPs) as pretreatment strategy that significantly facilitated the removal of STZ from aquaculture water. Furthermore, a potential sulfonamide-degrading microorganism, Cylindrospermum_stagnale, belonging to the phylum Cyanobacteria, was the dominant functional bacteria according to the results of high-throughput 16S rRNA gene sequencing conducted after the B-CSBC/PMS treatment. This study provides new insights into the SR-CAOP combined with bioprocesses for removing STZ from aqueous environments.

Efficient Activation of Peroxymonosulfate by Biochar-Loaded Zero-Valent Copper for Enrofloxacin Degradation: Singlet Oxygen-Dominated Oxidation Process

The removal of contaminants of emerging concern (CECs) has become a hot research topic in the field of environmental engineering in recent years. In this work, a simple pyrolysis method was designed to prepare a high-performance biochar-loaded zero-valent copper (CuC) material for the catalytic degradation of antibiotics ENR by PMS. The results showed that 10 mg/L of ENR was completely removed within 30 min at an initial pH of 3, CuC 0.3 g/L, and PMS 2 mmol/L. Further studies confirmed that the reactive oxygen species (ROS) involved in ENR degradation are ·OH, SO4-·, ¹O₂, and O2-. Among them, ¹O₂ played a major role in degradation, whereas O2-· played a key role in the indirect generation of ¹O₂. On the one hand, CuC adsorbed and activated PMS to generate ·OH, SO4-· and O2-·. O2-· was unstable and reacted rapidly with H₂O and ·OH to generate large amounts of ¹O₂. On the other hand, both the self-decomposition of PMS and direct activation of PMS by C=O on biochar also generated ¹O₂. Five byproducts were generated during degradation and eventually mineralized to CO₂, H₂O, NO3-, and F^-. This study provides a facile strategy and new insights into the biochar-loaded zero-valent transition-metal-catalyzed PMS degradation of CECs.

Unveiling the Origins of Selective Oxidation in Single-Atom Catalysis via Co-N4-C Intensified Radical and Nonradical Pathways

Single-atom catalysts (SACs)-based peroxymonosulfate (PMS) systems are highly selective to the type of organic pollutants while the mechanisms remain ambiguous. In this work, we carried out experimental and theoretical investigations to reveal the origins of selectivity of radical and nonradical pathways in a designated Co-N₄-C/PMS system. Two typical pollutants [bisphenol A (BPA) and metronidazole (MNZ)] with different molecular structures were employed for comparison. We found that radical oxidation (SO₄^•- and HO^•) and nonradical electron-transfer pathway (ETP) co-existed in the Co-N₄-C/PMS system. Pollutants (e.g., MNZ) with a high redox potential were degraded primarily by free radicals rather than ETP, while the oxidization of low-redox pollutants (e.g., BPA) was dominated by ETP at the surface region of Co-N₄-C which overwhelmed the contributions of radicals in the homogeneous phase. Intriguingly, the contributions of radical and nonradical pathways could be manipulated by the PMS loading, which simultaneously increased the radical population and elevated the oxidation potential of Co-N₄-C-PMS* complexes in ETP. Findings from this work will unravel the mysterious selective behavior of the SACs/PMS systems in the oxidation of different micropollutants.

Promotion of Phenol Electro-oxidation by Oxygen Evolution Reaction on an Active Electrode for Efficient Pollution Control and Hydrogen Evolution

We report an electrolysis system using NiFe layered double hydroxide/CoMoO₄/nickel foam (NFLDH/CMO/NF) as the anode and CMO/NF as the cathode for simultaneous phenol electro-oxidation and water electrolysis. This system shows high performance for both phenol degradation and hydrogen evolution. We demonstrate that the degradation rate of phenol on the active anode is governed by the mass transfer rate at a low phenol concentration (0.5-2 mM) and by the electro-oxidation rate at a high phenol concentration (5 mM). The anodic oxygen evolution reaction (OER) can promote the phenol degradation through enhanced mass transfer efficiency. More importantly, the common deactivation issue of phenol electro-oxidation on the inert anode can be eliminated by the high OER activity of the active anode. The constructed full electrolytic cell only needs a low potential of 1.498 V to achieve 10 mA/cm² for water electrolysis. The reported promotion effect of phenol degradation by OER as well as the improved anode resistance to deactivation offer new insights into efficient and robust waste-to-resource electrolysis system for water treatment.