The Need for Testing Isomer Profiles of Perfluoroalkyl Substances to Evaluate Treatment Processes

Isomer-specific sediment-water partitioning and bioaccumulation of perfluoroalkyl sulfonyl fluorides

Perfluoroalkyl sulfonyl fluorides (PFASFs) have long been used as crucial synthetic intermediates in the production of various perfluoroalkyl substances. While, knowledge on the environmental occurrence and behaviors of PFASFs in the aquatic environment is still very limited, especially at the isomer-specific level. In this study, surface water, sediment, and fish samples were collected from the water environment near a wastewater treatment plant outlet, and analyzed them for five PFASFs. The highest mean water concentration was observed for linear perfluorobutyl sulfonyl fluoride (l-PFBSF; 122 ng/L, 10-457 ng/L). While, linear perfluorooctane sulfonyl fluoride (l-PFOSF) displayed the highest mean concentration in collected sediment (108 ng/g dw, 78-271 ng/g dw) and fish (113 ng/g ww, 48-244 ng/g ww). For detected PFASFs, their branched isomers accounted for mean 16-29 %, 8.2-11 %, and 16-25 % of total PFASFs (sum of linear and branched isomers) in water, sediment, and fish samples, respectively. Calculated log-transformed sediment-water partitioning coefficients (log Koc) of linear PFASFs linearly increased with the increasing carbon chain length, with the mean values ranging from 2.1 ± 0.36 (l-PFBSF) to 3.9 ± 0.18 (l-PFOSF). Calculated log-transformed bioaccumulation factors (log BAF) of linear PFASFs increased from 1.7 ± 0.34 (l-PFBSF) to 3.0 ± 0.27 (l-PFOSF) with the carbon chain length. Branched isomers of detected PFASFs displayed lower log Koc and log BAF values than their respective linear isomers. To our knowledge, this study provides the first evidence on isomer-specific environmental behaviors of PFASFs, which is crucial for assessing the ecological risks these compounds may pose.

Assessing PFAS in drinking water: Insights from the Czech Republic's risk-based monitoring approach

This study investigates the presence of perfluoroalkyl substances (PFAS) in the drinking water supplies in the Czech Republic using a risk-based monitoring approach. Tap water samples (n = 27) from sources close to areas potentially contaminated with PFAS were analysed. A total of 28 PFAS were measured using ultra-performance liquid chromatography with tandem mass spectrometry after solid phase extraction. Total PFAS concentrations (∑PFAS) varied from undetectable to 90.8 ng/L, with perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA) and perfluorobutane sulfonic acid (PFBS) being the most abundant, detected in over 70% of samples. Risk-based monitoring in drinking water showed that commercial wells had higher PFAS levels compared to tap water, particularly C4-C9 perfluorocarboxylic acids (PFCAs), possibly due to proximity to industrial areas. However, the hypothesis that risk-based monitoring is more effective than random monitoring was not confirmed, possibly because specific sources did not produce the target PFAS or because of the wide range and less obvious sources of potential contamination. The study also assessed exposure risks and compliance with regulatory thresholds. Weekly intake estimates for adults and children indicated that regular consumption of most contaminated water sample would exceed the tolerable weekly intake. Compared to EU regulations, none of the tap water samples exceeded the 'Sum of PFAS' parametric value of 100 ng/L, though one sample approached this limit. In addition, surface water samples from the Jizera River (n = 21) showed a wider range of PFAS, with C7-C10 PFCAs, PFBS, and perfluorooctane sulfonic acid (PFOS) in every sample, with higher PFOS concentrations at a median of 2.56 ng/L. ∑PFAS concentrations increased downstream, rising from 1.08 ng/L near the spring to 26 ng/L downstream. This comprehensive analysis highlights the need for detailed/areal monitoring to also address hidden or non-obvious sources of PFAS contamination.

High-throughput screening of protein interactions with per- and polyfluoroalkyl substances (PFAS) used in photolithography

Per- and polyfluoroalkyl substances (PFAS) are synthetic chemicals used extensively across industries, including semiconductor manufacturing. Semiconductors are ubiquitous, and there is increasing global demand for semiconductors, e.g., for advanced technologies and the automotive industry. Despite their extensive use, the toxicity and bioaccumulation potential of PFAS used in photolithography, a critical process in semiconductor manufacturing, remain poorly understood. Moreover, most lack experimental data and standards for testing. Here, we identified 96 photolithography-relevant PFAS and developed a computational framework to evaluate their potential hazards through protein binding. By integrating molecular dynamics (MD) and docking, we predicted the binding affinities and positions of PFAS to five proteins-liver fatty acid binding protein (LFABP), serum albumin (SA), peroxisome proliferator-activated receptors α and γ (PPARα and PPARγ), and transthyretin (TTR). These proteins were chosen as their binding with PFAS has been linked to PFAS bioaccumulation and to hepatic, reproductive, developmental, and endocrine disruption. Comparisons with empirical data demonstrated our approach balances simulation speed and robustness, better estimating absolute and relative binding affinities than docking alone. PFAS-protein binding affinities were generally positively associated with fluorinated chain length and the presence of aromatic rings, but limited by the protein binding pocket dimensions. Notably, we identified 22 PFAS with stronger predicted binding than perfluorooctane sulfonic acid (PFOS), a known hazardous PFAS, to at least one target protein, suggesting the potential for toxicological concern. By enabling proactive evaluation of PFAS that are unavailable for experimental testing, this work contributes to safeguarding environmental and human health amidst rising semiconductor demands.

Assessment of the Variability in the Occurrence of PFAS in Fish Tissues from Selected Fisheries in the Baltic Sea

In this study, the results of a comprehensive assessment of the variability in the occurrence of ten perfluorinated compounds (PFAS) in fish tissues originating from 2014 to 2019 from six fisheries in the Baltic Sea are presented. A total of 360 fish samples of three species (perch, herring and flatfish) were analysed. For the determination of PFAS, both linear and branched stereoisomers, LC-ESI-MS/MS technique preceded by simultaneous SPE isolation was validated and applied. The total concentration of all determined PFAS compounds shows that the highest levels were observed in the Szczecin Lagoon (4.8 ± 0.7 µg/kg) and the lowest in the Pomeranian Bay (1.9 ± 0.1 µg/kg). In most samples, the dominant compound was perfluorooctane sulfonic acid (PFOS). The present research enabled the assessment of the variability in the occurrence of PFAS stereoisomers in marine fish.

Non-targeted analysis reveals hundreds of per- and polyfluoroalkyl substances (PFAS) in UK freshwater in the vicinity of a fluorochemical plant

There are now over 7 million recognised per- and polyfluoroalkyl substances (PFAS), however the majority of routine monitoring programmes and policy decisions are based on just a handful of these. There is need for a shift towards gaining a better understanding of the total PFAS present in a sample rather than relying on targeted analysis alone. Total PFAS methods help us to understand if targeted methods are missing a mass of PFAS, but they do not identify which PFAS are missing. Non-targeted methods fill this knowledge gap by using high resolution mass spectrometry to identify the PFAS present in a sample. In this manuscript we use complimentary targeted and non-targeted analysis (NTA) to detect hundreds of PFAS in five freshwater samples obtained from the Northwest of the UK. Targeted analysis revealed PFOA at a maximum concentration of 12,100 ng L-1, over three orders of magnitude greater than the proposed environmental quality standard (EQS) of 100 ng L-1. A conservative assessment calculated an average total PFAS concentration of approximately 40 μg L-1 across all samples. A suspect screening approach identified between 1175 (least conservative) to 89 (most conservative) PFAS at confidence level 4. Exploratory data analysis was used to identify 33 PFAS at confidence level 3 and 10 PFAS at a confidence level of 2. Only 8 of these 43 PFAS (representing 17% of the total PFAS peak area) are regularly monitored in the UK as part of the UK DWI 47 PFAS. Our results suggested the presence of a novel group of unsaturated perfluoroalkyl ether carboxylic acids (U-PFECAs) related to EEA-NH4, a perfluoroalkyl ether carboxylic acid (PFECA), providing an example of the benefits of non-targeted screening. This study highlights the merits of non-targeted methods and demonstrates that future monitoring programmes and regulations would benefit from incorporating a non-targeted element.

Development, validation, and clinical assessment of a liquid chromatography-tandem mass spectrometry serum assay for per- and polyfluoroalkyl substances (PFAS) recommended by the National Academies of Science, Engineering, and Medicine (NASEM)

Per- and polyfluoroalkyl substances (PFAS) are widely used in industry, residential, and consumer products. Studies have shown associations between high PFAS exposure and adverse health effects. In 2022, the National Academies of Science, Engineering, and Medicine (NASEM) published Guidance on PFAS Exposure, Testing, and Clinical Follow-up providing laboratory and clinical direction. The Guidance suggests nine PFAS should be measured in serum or plasma specimens and summed to provide a total PFAS concentration using a NASEM-recommended method. Follow-up clinical recommendations are based on the calculated PFAS NASEM summation. We developed and validated a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method in accordance with NASEM recommendations but distinguished by the ability to separate closely related structural isomers. As part of our validation, PFAS prevalence was evaluated in a population survey comprised of clinical donor and remnant specimens (n = 1023 in total). In this study, 82.2% of the specimens had PFAS NASEM summations of 2 to < 20 ng/mL and 2.5% had a summation ≥ 20 ng/mL. The median PFAS NASEM summation was 4.65 ng/mL in this study, lower than the 7.74 ng/mL median observed in the 2017-2020 Centers for Disease Control and Prevention, National Health and Nutrition Examination Survey (n = 3072). This lower median PFAS NASEM summation may reflect a decline in PFAS population levels over time or sample population exposure differences.

Characterization of PFOA isomers from PFAS precursors and their reductive defluorination

Perfluorooctanoic acid (PFOA) including linear and branched isomers is one of only three PFAS included in the Stockholm convention on Persistent Organic Pollutants. Unfortunately, PFOA branched isomers have received less attention than the linear due to analytical difficulties and perceived lower environmental concentrations. In this study, we revealed a environmentally relevant pathway for the formation of branched PFOA from PFAS precursors. AFFF samples showed a doubling of branched PFOA concentrations (138 mg/L) after TOP assay oxidation (307 mg/L). These findings indicate that branched PFOA may be more pervasive in the environment than previously thought. Additionally, we investigated the reductive degradability of PFOA using vitamin B12 (VB12) (a naturally occurring electron shuttle) in combination with either zero-valent zinc (ZVZ) or zero-valent iron (ZVI). Linear PFOA, as well as two branched isomers (3-methyl PFOA and 5,5-dimethyl PFOA), resisted reductive defluorination under the experimental conditions. However, all other branched isomers degraded within 10 days in the ZVZ-VB12 system. The experimental rate constants for specific PFOA isomers generally correlate with their calculated reduction potentials, except for 6-methyl PFOA. A potential defluorination pathway was proposed based on high-resolution mass spectrometry (LC-Orbitrap) and density functional theory (DFT) studies.

Accumulation of Per- and Polyfluoroalkyl Substances (PFAS) in Coastal Sharks from Contrasting Marine Environments: The New York Bight and The Bahamas

Per- and polyfluoroalkyl substances (PFAS) enter the marine food web, accumulate in organisms, and potentially have adverse effects on predators and consumers of seafood. However, evaluations of PFAS in meso-to-apex predators, like sharks, are scarce. This study investigated PFAS occurrence in five shark species from two marine ecosystems with contrasting relative human population densities, the New York Bight (NYB) and the coastal waters of The Bahamas archipelago. The total detected PFAS (∑PFAS) concentrations in muscle tissue ranged from 1.10 to 58.5 ng g-1 wet weight, and perfluorocarboxylic acids (PFCAs) were dominant. Fewer PFAS were detected in Caribbean reef sharks (Carcharhinus perezi) from The Bahamas, and concentrations of those detected were, on average, ∼79% lower than in the NYB sharks. In the NYB, ∑PFAS concentrations followed: common thresher (Alopias vulpinus) > shortfin mako (Isurus oxyrinchus) > sandbar (Carcharhinus plumbeus) > smooth dogfish (Mustelus canis). PFAS precursors/intermediates, such as 2H,2H,3H,3H-perfluorodecanoic acid and perfluorooctanesulfonamide, were only detected in the NYB sharks, suggesting higher ambient concentrations and diversity of PFAS sources in this region. Ultralong-chain PFAS (C ≥ 10) were positively correlated with nitrogen isotope values (δ15N) and total mercury in some species. Our results provide some of the first baseline information on PFAS concentrations in shark species from the northwest Atlantic Ocean, and correlations between PFAS, stable isotopes, and mercury further contextualize the drivers of PFAS occurrence.

Levels and spatial profile of per- and polyfluoroalkyl substances in edible shrimp products from Japan and neighboring countries; a potential source of dietary exposure to humans

Exposure to per- and polyfluoroalkyl substances (PFAS) is of great concern for human health because of their persistence and potentially adverse effects. Dietary intake, particularly through aquatic products, is a significant route of human exposure to PFAS. We analyzed perfluoroalkyl sulfonic acid (PFSA with carbon numbers from 6 to 8 and 10 (C６-C8, C10)) and perfluorooctanesulfonamide (FOSA), and perfluoroalkyl carboxylic acid (PFCA with carbon numbers from 6 to 15 (C6-C15)) in 30 retail packs of edible shrimps, which included seven species from eight coastal areas of Japan and neighboring countries. The most prevalent compounds were perfluorooctane sulfonate (PFOS, C8) and perfluoroundecanoic acid (PFUnDA, C11), accounting for 46 % of total PFAS. The concentrations ranged from 6.5 to 44 ng/g dry weight (dw) (equivalent to 1.5 to 10 ng/g wet weight (ww)) and varied according to species and location. For example, Alaskan pink shrimp (Pandalus eous) from the Hokuriku coast, Japan contained high levels of long-chain PFCAs (38 ng/g dw (equivalent to 8.7 ng/g ww)), while red rice prawn (Metapenaeopsis barbata) from Yamaguchi, Japan contained a high concentration of PFOS (29 ng/g dw (equivalent to 6.7 ng/g ww)). We also observed regional differences in the PFAS levels with higher concentrations of long-chain PFCAs in Japanese coastal waters than in the South China Sea. The PFAS profiles in shrimp were consistent with those in the diet and serum of Japanese consumers, suggesting that consumption of seafood such as shrimp may be an important source of exposure. The estimated daily intake of sum of all PFAS from shrimp from Japanese coastal water was 0.43 ng/kg body weight/day in average, which could reach the weekly tolerable values (4.4 ng/kg body weight /week) for the sum of the four PFSA set by the EFSA for heavy consumers. The high concentration of PFAS in shrimp warrants further investigation.

Four Decades of Spatiotemporal Variability of Per- and Polyfluoroalkyl Substances (PFASs) in the Baltic Sea

Temporal and spatial variability of per- and polyfluoroalkyl substances (PFASs) in herring, cod, eelpout, and guillemot covering four decades and more than 1000 km in the Baltic Sea was investigated to evaluate the effect of PFAS regulations and residence times of PFASs. Overall, PFAS concentrations responded rapidly to recent regulations but with some notable basin- and homologue-specific variability. The well-ventilated Kattegat and Bothnian Bay showed a faster log-linear decrease for most PFASs than the Baltic Proper, which lacks a significant loss mechanism. PFOS and FOSA, for example, have decreased with 0-7% y-1 in the Baltic Proper and 6-16% y-1 in other basins. PFNA and partly PFOA are exceptions and continue to show stagnant or increasing concentrations. Further, we found that Bothnian Bay herring contained the highest concentrations of >C12 perfluoroalkyl carboxylic acids (PFCAs), likely from rivers with high loads of dissolved organic carbon. In the Kattegat, low PFAS concentrations, but a high FOSA fraction, could be due to influence from the North Sea inflow below the halocline and possibly a local source of FOSA and/or isomer-specific biotransformation. This study represents the most comprehensive spatial and temporal investigation of PFASs in Baltic wildlife while providing new insights into cycling of PFASs within the Baltic Sea ecosystem.

Application of electron beam technology to decompose per- and polyfluoroalkyl substances in water

The widespread detection of per- and polyfluoroalkyl substances (PFAS) in environmental compartments across the globe has raised several health concerns. Destructive technologies that aim to transform these recalcitrant PFAS into less toxic, more manageable products, are gaining impetus to address this problem. In this study, a 9 MeV electron beam accelerator was utilized to treat a suite of PFAS (perfluoroalkyl carboxylates: PFCAs, perfluoroalkyl sulfonates, and 6:2 fluorotelomer sulfonate: FTS) at environmentally relevant levels in water under different operating and water quality conditions. Although perfluorooctanoic acid and perfluorooctane sulfonic acid showed >90% degradation at <500 kGy dose at optimized conditions, a fluoride mass balance revealed that complete defluorination occurred only at/or near 1000 kGy. Non-target and suspect screening revealed additional degradation pathways differing from previously reported mechanisms. Treatment of PFAS mixtures in deionized water and groundwater matrices showed that FTS was preferentially degraded (∼90%), followed by partial degradation of long-chain PFAS (∼15-60%) and a simultaneous increase of short-chain PFAS (up to 20%) with increasing doses. The increase was much higher (up to 3.5X) in groundwaters compared to deionized water due to the presence of PFAS precursors as confirmed by total oxidizable precursor (TOP) assay. TOP assay of e-beam treated samples did not show any increase in PFCAs, confirming that e-beam was effective in also degrading precursors. This study provides an improved understanding of the mechanism of PFAS degradation and revealed that short-chain PFAS are more resistant to defluorination and their levels and regulation in the environment will determine the operating conditions of e-beam and other PFAS treatment technologies.

Sorption of per- and poly-fluoroalkyl substances and their precursors on activated carbon under realistic drinking water conditions: Insights into sorbent variability and PFAS structural effects

Recent stringent drinking water quality standards create challenges for water utilities to meet these standards. Advanced treatment techniques will have to be applied on many drinking water production locations to meet these quality standards. This study investigated the sorption of per- and polyfluorinated-alkyl substances (PFAS) onto granular activated carbon (GAC). The study was performed at environmentally relevant PFAS concentrations and a realistic water-to-GAC ratio, providing a realism often overlooked in existing studies. Three different forms of GAC were evaluated, differing in micropore and mesopore structures. Tap water spiked with 5 ng/L of each of 31 PFAS was used in the sorption experiments, i.e. perfluorocarboxylic acids (C4-C12), perfluorosulfonic acids (PFSA, C5-C10) including linear and branched isomers, and three groups of PFAS precursors (per-/polyfluoroalkyl ether acids, sulfonamides, and sulfonamide acetic acids). The three studied GAC did not exhibit distinct differences in PFAS sorption. The removal of PFAS was below 50 % for most studied PFAS, except for the short-chain PFAS precursors. Sorption was affected by both the carbon chain length and functional groups for PFAS, while this was not observed for PFAS precursors. The presence of ether linkages and sulfonamide groups notably enhanced sorption. Linear and branched PFSA demonstrated similar sorption behavior, whereas branched isomers of the sulfonamide acetic acid precursors exhibited significantly higher sorption. This indicates that sorption was determined by both hydrophobic and electrostatic interactions. Given the relatively low PFAS removal by GAC under environmentally relevant test conditions, further improvements in sorbents are required to ensure that PFAS concentrations in produced drinking water comply with drinking water standards.

Estimation of per- and polyfluoroalkyl substances (PFAS) half-lives in human studies: a systematic review and meta-analysis

BACKGROUND

Per- and polyfluoroalkyl substances (PFAS) constitute a heterogeneous group of synthetic compounds widely used in industrial applications. The estimation of PFAS half-life (t1/2) is essential to quantify their persistence, their toxicity and mechanism of action in humans.

OBJECTIVES

The purpose of this review is to summarize the evidence on PFAS half-lives in humans from the available literature, and to investigate the limitations and uncertainties characterizing half-life estimation.

METHODS

The search was conducted on PubMed, Scopus, and Embase databases up to July 03, 2023 and was aimed at identifying all papers that estimated PFAS half-life in human populations. We excluded studies on temporal trends or providing estimates of half-life based solely on renal clearance. As persistent and ongoing exposures can influence half-life estimation, we decided to include only studies that were conducted after the main source of exposure to PFAS had ceased. A random-effects meta-analysis was conducted on studies that reported perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS) or perfluorohexanesulfonic acid (PFHxS) half-life estimation. Risk of bias was evaluated using the OHAT tool.

RESULTS

A total of 13 articles were included in the review, with 5 studies conducted in exposed general populations and 8 studies conducted in exposed workers; the estimated mean half-life ranged from 1.48 to 5.1 years for PFOA, from 3.4 to 5.7 years for total PFOS, and from 2.84 to 8.5 years for PFHxS. High heterogeneity among studies was observed; potential reasons include the variability among the investigated populations, discrepancies in considering ongoing exposures, variability in PFAS isomeric compositions, accounting for background exposure, time since exposure stopped and methods used for half-life estimation.

DISCUSSION

Despite the efforts made to better understand PFAS toxicokinetics, further studies are needed to identify important characteristics of these persistent chemicals. Biomonitoring studies should focus on persistent and unaccounted sources of exposure to PFAS and on individual characteristics potentially determining half-life, to ensure accurate estimates.

PFΔScreen - an open-source tool for automated PFAS feature prioritization in non-target HRMS data

Per- and polyfluoroalkyl substances (PFAS) are a huge group of anthropogenic chemicals with unique properties that are used in countless products and applications. Due to the high stability of their C-F bonds, PFAS or their transformation products (TPs) are persistent in the environment, leading to ubiquitous detection in various samples worldwide. Since PFAS are industrial chemicals, the availability of authentic PFAS reference standards is limited, making non-target screening (NTS) approaches based on high-resolution mass spectrometry (HRMS) necessary for a more comprehensive characterization. NTS usually is a time-consuming process, since only a small fraction of the detected chemicals can be identified. Therefore, efficient prioritization of relevant HRMS signals is one of the most crucial steps. We developed PFΔScreen, a Python-based open-source tool with a simple graphical user interface (GUI) to perform efficient feature prioritization using several PFAS-specific techniques such as the highly promising MD/C-m/C approach, Kendrick mass defect analysis, diagnostic fragments (MS2), fragment mass differences (MS2), and suspect screening. Feature detection from vendor-independent MS raw data (mzML, data-dependent acquisition) is performed via pyOpenMS (or custom feature lists) with subsequent calculations for prioritization and identification of PFAS in both HPLC- and GC-HRMS data. The PFΔScreen workflow is presented on four PFAS-contaminated agricultural soil samples from south-western Germany. Over 15 classes of PFAS (more than 80 single compounds with several isomers) could be identified, including four novel classes, potentially TPs of the precursors fluorotelomer mercapto alkyl phosphates (FTMAPs). PFΔScreen can be used within the Python environment and is easily automatically installable and executable on Windows. Its source code is freely available on GitHub ( https://github.com/JonZwe/PFAScreen ).

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Coexisting ions and long-chain per- and polyfluoroalkyl substances (PFAS) inhibit the adsorption of short-chain PFAS by granular activated carbon

We assessed the competitive adsorption between long-chain and short-chain PFAS and the impact of coexisting ions to understand the mechanisms leading to the early breakthrough of short-chain PFAS from granular activated carbon (GAC) filters. Three pairs of short-chain and long-chain PFAS representing different functional groups were studied using GAC (Filtrasorb 400) in batch systems. In bisolute systems, the presence of long-chain PFAS decreased the adsorption of short-chain PFAS by 30-50% compared to their single solute adsorption capacity (0.22-0.31 mmol/g). In contrast to the partial decrease observed in bisolute systems, the addition of long-chain PFAS to GAC pre-equilibrated with short-chain PFAS completely desorbed all short-chain PFAS from GAC. This suggested that the outermost adsorption sites on GAC were preferentially occupied by short-chain PFAS in the absence of competition but were prone to displacement by long-chain PFAS. The presence of inorganic/organic ions inhibited the adsorption of short-chain PFAS (up to 60%) but had little to no impact on long-chain PFAS, with the inhibitory trend inversely correlated with Kow values. Study results indicated that the displacement of short-chain PFAS by long-chain PFAS and charge neutralization are important mechanisms contributing to the early breakthrough of short-chain PFAS from GAC systems.

Identification and characterization of diverse isomers of per- and polyfluoroalkyl substances in Chinese municipal wastewater

Linear and branched isomers of per- and polyfluoroalkyl substances (PFASs) are simultaneously present in the environment. However, isomer profiles of PFASs in municipal wastewater treatment plants (WWTPs) are still unknown because of the limitations of standards. Here, influent and effluent samples from 148 municipal WWTPs in China were collected. Ion mobility spectrometry was introduced into high-resolution mass spectrometry-based suspect screening methods to identify the target and suspect PFAS isomers. A total of 38 branched isomers of 14 typical PFASs were identified in wastewater samples. Linear PFASs had higher detection rates (22.3%-100%) than branched isomers (2.0%-98%). Compared to the influents, proportions of branched isomers of most PFASs (except for perfluoropentanoic acid and perfluorohexanoic acid) increased in the effluents. The conventional biological treatment processes (such as anaerobic-anoxic-aerobic and oxidation ditch treatments) had poor removal efficiency for linear PFASs (<21.4%) and branched isomers (<13.4%). No difference on removal efficiency among treatment processes was found. Furthermore, isomer composition in the WWTPs showed obvious differences between East China region and other regions, and the usage of short-chain PFASs (perfluorobutanesulfonic acid and perfluorohexanesulfonic acid) may be a key factor for driving this difference. This study sheds lights on the identification and characterization of PFAS isomers in WWTPs, which would be useful for development of monitoring and control strategies of PFASs.