Oxidation of Catechols at the Air-Water Interface by Nitrate Radicals

Tandem MS Elucidation of the Late-Stage Degradation Mechanism of Nitroplasticizer

Understanding the degradation behavior of nitroplasticizer (NP) and the subsequent production of nitro-organics is crucial for both environmental monitoring and material development. A nontargeted approach via LC-QTOF-MS was employed to thoroughly study the degradation mechanism of NP in its late aging stage. Both positive and negative modes of ESI were performed to increase the compound coverage. To shed light on the fragmentation behavior of NP degradants (e.g., compounds containing a high density of NO2 moieties and oxygen sites) in the positive mode, which is rarely reported, the high-resolution tandem MS information on precursor ions at m/z 251(+), 254(+), 266(+), and 270(+) and a pair of isomeric ions at m/z 284(+) was investigated to extract their common diagnostic ions and dissociation channels, including the neutral loss of 2,2-dinitropropanol, nitro-nitrite rearrangement, homolytic cleavage of NO2, and simple inductive cleavage. Additionally, leveraging the sensitivity for nitroaromatics in the negative polarity, negative ions m/z 182(-) and 233(-) are identified as dinitroaniline and dinitronaphthol, respectively, which confirm the secondary hydrolysis pathway of the antioxidant (e.g., N-phenyl-2-naphthylamine) postulated in our previous work. In addition to earlier findings, the detection of these eight degradants further supports the evidence of increased acid concentration and aging temperatures in the late-stage NP environment, which contribute to intricate degradation behaviors in different aging environments.

3-methoxycatechol causes vasodilation likely via KV channels: ex vivo, in silico docking and in vivo study

Substituted catechols include both natural and synthetic compounds found in the environment and foods. Some of them are flavonoid metabolites formed by the gut microbiota which are absorbed afterwards. Our previous findings showed that one of these metabolites, 4-methylcatechol, exerts potent vasorelaxant effects in rats. In the current study, we aimed at testing of its 22 structural congeners in order to find the most potent structure and to investigate the mechanism of action. 3-methoxycatechol (3-MOC), 4-ethylcatechol, 3,5-dichlorocatechol, 4-tert-butylcatechol, 4,5-dichlorocatechol, 3-fluorocatechol, 3-isopropylcatechol, 3-methylcatechol and the parent 4-methylcatechol exhibited high vasodilatory activities on isolated rat aortic rings with EC50s ranging from ∼10 to 24 μM. Some significant sex-differences were found. The most potent compound, 3-MOC, relaxed also resistant mesenteric artery but not porcine coronary artery, and decreased arterial blood pressure in both male and female spontaneously hypertensive rats in vivo without affecting heart rate. It potentiated the vasodilation mediated by cAMP and cGMP, but did not impact L-type Ca2+-channels. By using two inhibitors, activation of voltage-gated potassium channels (KV) was found to be involved in the mechanism of action. This was corroborated by docking analysis of 3-MOC with the KV7.4 channel. None of the most active catechols decreased the viability of the A-10 rat embryonic thoracic aorta smooth muscle cell line. Our findings showed that various catechols can relax vascular smooth muscles and hence could provide templates for developing new antihypertensive vasodilator agents without affecting coronary circulation.

High-Performance Dopamine-Based Supramolecular Bio-Adhesives

The need for wound closure or surgical procedures has been commonly met by the application of sutures. Unfortunately, these are often invasive or subject to contamination. Alternative solutions are offered by surgical adhesives that can be applied and set without major disruption; a new class of supramolecular-based adhesives provides potential solutions to some of these challenges. In this study, a series of polymers utilizing dopamine as a self-assembling unit are synthesized. It is found that these motifs act as extremely effective adhesives, with control over the mechanical strength of the adhesion and materials' tensile properties enabled by changing monomer feed ratios and levels of cross-linking. These materials significantly outperform commercially available bio-adhesives, showing yield strengths after adhesion at least two times higher than that of BioGlue and Tisseel, as well as the ability to re-adhere with significant recovery of adhesion strength. Promisingly, the materials are shown to be non-cytotoxic, with cell viability > 90%, and able to perform in aqueous environments without significant loss in strength. Finally, the removal of the materials, is possible using benign organic solvents such as ethanol. These properties all demonstrate the effectiveness of the materials as potential bio-adhesives, with potential advantages for use in surgery.

The Chemical Landscape of Leaf Surfaces and Its Interaction with the Atmosphere

Atmospheric chemists have historically treated leaves as inert surfaces that merely emit volatile hydrocarbons. However, a growing body of evidence suggests that leaves are ubiquitous substrates for multiphase reactions-implying the presence of chemicals on their surfaces. This Review provides an overview of the chemistry and reactivity of the leaf surface's "chemical landscape", the dynamic ensemble of compounds covering plant leaves. We classified chemicals as endogenous (originating from the plant and its biome) or exogenous (delivered from the environment), highlighting the biological, geographical, and meteorological factors driving their contributions. Based on available data, we predicted ≫2 μg cm-2 of organics on a typical leaf, leading to a global estimate of ≫3 Tg for multiphase reactions. Our work also highlighted three major knowledge gaps: (i) the overlooked role of ambient water in enabling the leaching of endogenous substances and mediating aqueous chemistry; (ii) the importance of phyllosphere biofilms in shaping leaf surface chemistry and reactivity; (iii) the paucity of studies on the multiphase reactivity of atmospheric oxidants with leaf-adsorbed chemicals. Although biased toward available data, we hope this Review will spark a renewed interest in the leaf surface's chemical landscape and encourage multidisciplinary collaborations to move the field forward.

Research Progress on the Degradation of Organic Pollutants in Water by Activated Persulfate Using Biochar-Loaded Nano Zero-Valent Iron

Biochar (BC) is a new type of carbon material with a high specific surface area, porous structure, and good adsorption capacity, which can effectively adsorb and enrich organic pollutants. Meanwhile, nano zero-valent iron (nZVI) has excellent catalytic activity and can rapidly degrade organic pollutants through reduction and oxidation reactions. The combined utilization of BC and nZVI can not only give full play to their advantages in the adsorption and catalytic degradation of organic pollutants, but also help to reduce the agglomeration of nZVI, thus improving its efficiency in water treatment and providing strong technical support for water resources protection and environmental quality improvement. This article provides a detailed introduction to the preparation method and characterization technology, reaction mechanism, influencing factors, and specific applications of BC and nZVI, and elaborates on the research progress of BC-nZVI in activating persulfate (PS) to degrade organic pollutants in water. It has been proven experimentally that BC-nZVI can effectively remove phenols, dyes, pesticides, and other organic pollutants. Meanwhile, in response to the existing problems in current research, this article proposes future research directions and challenges, and summarizes the application prospects and development trends of BC-nZVI in water treatment. In summary, BC-nZVI-activated PS is an efficient technology for degrading organic pollutants in water, providing an effective solution for protecting water resources and improving environmental quality, and has significant application value.

Coupling Fe-Co atomic pair to promote the selective reduction of nitroaromatics under mild conditions

Selectively reducing nitroaromatics into aromatic amines will not only remove nitroaromatic pollutants in waste effluents to reduce environmental risks, but also yield important feedstocks for chemical industrial manufactures. In this study, a FeCo-co-embedded N-doped Carbon (FeCo-N-C) catalyst with Fe-Co atomic pair has been identified with favorable activity, superior selectivity, excellent reusability, as well as outstanding performance in the treatment of real water. The combined results from theoretical study and experimental tests indicate that the improved catalytic performance of FeCo-N-C is owing to the narrowed band gap and electron delocalization caused by the Fe-Co atomic pair which can improve electron transport in its catalytic reaction. The results of isotope experiments and H* quenching experiments confirm that H2O is the source of hydrogen in catalytic reduction of PNP. FeCo-N-C is identified as a superior catalyst to replace multitudinous currently used noble-metal catalysts for the selective catalytic reduction of nitroaromatics in wastewater treatment.

Wetting vs Droplet Aggregation: A Broadband Rotational Spectroscopic Study of 3-Methylcatechol⋅⋅⋅Water Clusters

Two competing solvation pathways of 3-methylcatechol (MC), an atmospherically relevant aromatic molecule, with up to five water molecules were explored in detail by using a combination of broadband rotational spectroscopy and computational chemistry. Theoretically, two different pathways of solvation emerge: the commonly observed droplet pathway which involves preferential binding among the water molecules while the solute serves as an anchor point for the formation of a water cluster, and an unexpected wetting pathway which involves interactions between the water molecules and the aromatic face of MC, i.e., a wetting of the π-surface. Conclusive identification of the MC hydrate structures, and therefore the wetting pathway, was facilitated by rotational spectra of the parent MC hydrates and several H2 18 O and 13 C isotopologues which exhibit splittings associated with methyl internal rotation and/or water tunneling motions. Theoretical modelling and analyses offer insights into the tunneling and conversion barriers associated with the observed hydrate conformers and the nature of the non-covalent interactions involved in choosing the unusual wetting pathway.

Roles of HNO x and Carboxylic Acids in the Thermal Stability of Nitroplasticizer

In the thermal aging of nitroplasticizer (NP), the produced nitrous acid (HONO) can decompose into reactive nitro-oxide species and nitric acid (HNO₃). These volatile species are prone to cause cascaded deterioration of NP and give rise to various acidic constituents. To gain insight on the early stage of NP degradation, an adequate method for measuring changes in the concentrations of HONO, HNO₃, and related acidic species is imperative. The typical assessment of acidity in nonaqueous solutions (i.e., acid number) cannot differentiate acidic species and thus presents difficulty in the measurement of HONO and HNO₃ at a micromolar concentration level. Using liquid-liquid extraction and ion chromatography (IC), we developed a fast and unambiguous analytical method to accurately determine the concentration of HONO, HNO₃, acetic/formic acids, and oxalic acid in aged NP samples. Given by the overlay analysis results of liquid chromatography coupled with quadrupole time-of-flight mass spectrometry and IC, the prominent increase of produced HONO after the depletion of antioxidants is the primary cause of HNO₃ formation in the late stage of NP degradation, which results in the acid-catalyzed hydrolysis of NP into 2,2-dinitropropanol and acetic/formic acids. Our study has demonstrated that the aging temperature plays a crucial role in accelerating the formation and decomposition of HONO, which consequently increases the acidity of aged NP samples and hence accelerates the hydrolyzation of NP. Therefore, to prevent NP from undergoing rapid degradation, we suggest that the concentration of HNO₃ should be maintained below 1.35 mM and the temperature under 38 °C.

Spontaneous dark formation of OH radicals at the interface of aqueous atmospheric droplets

Hydroxyl radical (OH) is a key oxidant that triggers atmospheric oxidation chemistry in both gas and aqueous phases. The current understanding of its aqueous sources is mainly based on known bulk (photo)chemical processes, uptake from gaseous OH, or related to interfacial O3 and NO3 radical-driven chemistry. Here, we present experimental evidence that OH radicals are spontaneously produced at the air-water interface of aqueous droplets in the dark and the absence of known precursors, possibly due to the strong electric field that forms at such interfaces. The measured OH production rates in atmospherically relevant droplets are comparable to or significantly higher than those from known aqueous bulk sources, especially in the dark. As aqueous droplets are ubiquitous in the troposphere, this interfacial source of OH radicals should significantly impact atmospheric multiphase oxidation chemistry, with substantial implications on air quality, climate, and health.

The spatiotemporal variation of PM2.5-O3 association and its influencing factors across China: Dynamic Simil-Hu lines

In recent years, PM_2.5 and O₃ composite airborne pollution has become one of the most severe environment issues in China. To get a better understanding and tackle these problems, we employed multi-year data to explore the spatiotemporal variation of the PM_2.5-O₃ relationship in China and investigated its major driving factors. Firstly, interesting patterns were found that named dynamic Simil-Hu lines, which presented a combined effect of natural and anthropogenic influences, were closely related to the spatial patterns of PM_2.5-O₃ association across seasons. Furthermore, regions with lower altitudes, higher humidity, higher atmospheric pressure, higher temperature, fewer sunshine hours, more accumulated precipitation, denser population and higher GDP often show positive PM_2.5-O₃ associations, regardless of seasonal variations. Amongst these factors, humidity, temperature and precipitation were dominant factors. This research suggests that the collaborative governance of composite atmospheric pollution should be implemented dynamically, in consideration of geographical locations, meteorological conditions and socioeconomic conditions.