Platinum Recovery from Synthetic Extreme Environments by Halophilic Bacteria

Halo-alkaliphilic microbes as an effective tool for heavy metal pollution abatement and resource recovery: challenges and future prospects

The current study presents an overview of heavy metals bioremediation from halo-alkaline conditions by using extremophilic microorganisms. Heavy metal remediation from the extreme environment with high pH and elevated salt concentration is a challenge as mesophilic microorganisms are unable to thrive under these polyextremophilic conditions. Thus, for effective bioremediation of extreme systems, specialized microbes (extremophiles) are projected as potential bioremediating agents, that not only thrive under such extreme conditions but are also capable of remediating heavy metals from these environments. The physiological versatility of extremophiles especially halophiles and alkaliphiles and their enzymes (extremozymes) could conveniently be harnessed to remediate and detoxify heavy metals from the high alkaline saline environment. Bibliometric analysis has shown that research in this direction has found pace in recent years and thus this review is a timely attempt to highlight the importance of halo-alkaliphiles for effective contaminant removal in extreme conditions. Also, this review systematically presents insights on adaptive measures utilized by extremophiles to cope with harsh environments and outlines the role of extremophilic microbes in industrial wastewater treatment and recovery of metals from waste with relevant examples. Further, the major challenges and way forward for the effective applicability of halo-alkaliphilic microbes in heavy metals bioremediation from extremophilic conditions are also highlighted.

Process optimization and modeling of Cd2+ biosorption onto the free and immobilized Turbinaria ornata using Box-Behnken experimental design

The release of effluents containing cadmium ions into aquatic ecosystems is hazardous to humans and marine organisms. In the current investigation, biosorption of Cd²⁺ ions from aqueous solutions by freely suspended and immobilized Turbinaria ornata biomasses was studied. Compared to free cells (94.34%), the maximum Cd²⁺ removal efficiency reached 98.65% for immobilized cells obtained via Box–Behnken design under optimized conditions comprising algal doses of 5.04 g L⁻¹ and 4.96 g L⁻¹, pH values of 5.06 and 6.84, and initial cadmium concentrations of 25.2 mg L⁻¹ and 26.19 mg L⁻¹, respectively. Langmuir, Freundlich, and Temkin isotherm models were suitably applied, providing the best suit of data for free and immobilized cells, but the Dubinin–Radushkevich model only matched the immobilized algal biomass. The maximum biosorption capacity of Cd²⁺ ions increased with the immobilized cells (29.6 mg g⁻¹) compared to free cells (23.9 mg g⁻¹). The Cd²⁺ biosorption data obtained for both biomasses followed pseudo-second-order and Elovich kinetic models. In addition, the biosorption process is controlled by film diffusion followed by intra-particle diffusion. Cd²⁺ biosorption onto the free and immobilized biomasses was spontaneous, feasible, and endothermic in nature, according to the determined thermodynamic parameters. The algal biomass was further examined via SEM/EDX and FTIR before and after Cd²⁺ biosorption. SEM/EDX analysis revealed Cd²⁺ ion binding onto the algal surface. Additionally, FTIR analysis confirmed the presence of numerous functional groups (hydroxyl, carboxyl, amine, phosphate, etc.) participating in Cd²⁺ biosorption. This study verified that immobilized algal biomasses constitute a cost-effective and favorable biosorbent material for heavy metal removal from ecosystems.

Electrified bioreactors: the next power-up for biometallurgical wastewater treatment

Over the past decades, biological treatment of metallurgical wastewaters has become commonplace. Passive systems require intensive land use due to their slow treatment rates, do not recover embedded resources and are poorly controllable. Active systems however require the addition of chemicals, increasing operational costs and possibly negatively affecting safety and the environment. Electrification of biological systems can reduce the use of chemicals, operational costs, surface footprint and environmental impact when compared to passive and active technologies whilst increasing the recovery of resources and the extraction of products. Electrification of low rate applications has resulted in the development of bioelectrochemical systems (BES), but electrification of high rate systems has been lagging behind due to the limited mass transfer, electron transfer and biomass density in BES. We postulate that for high rate applications, the electrification of bioreactors, for example, through the use of electrolyzers, may herald a new generation of electrified biological systems (EBS). In this review, we evaluate the latest trends in the field of biometallurgical and microbial‐electrochemical wastewater treatment and discuss the advantages and challenges of these existing treatment technologies. We advocate for future research to focus on the development of electrified bioreactors, exploring the boundaries and limitations of these systems, and their validity upon treating industrial wastewaters.

Roles of cation efflux pump in biomineralization of cadmium into quantum dots in Escherichia coli

Cadmium (Cd) is a typical and widely present toxic heavy metals in environments. Biomineralization of Cd ions could alleviate the toxicity and produce valuable products in certain waste streams containing selenite. However, the impact of the intrinsic Cd(II) efflux system on the biotransformation process remains unrevealed. In this work, the significance of the efflux system on Cd biomineralization was evaluated by constructing engineered Escherichia coli strains, including ΔzntA with suppressed Cd(II) efflux system and pYYDT-zntA with strengthened Cd(II) efflux system. Compared to the wild type (WT), 20% more Cd ions were accumulated in ΔzntA and 17% less were observed in pYYDT-zntA in the presence of selenite as determined by inductively coupled plasma atomic emission spectrometer. Through combination with X-ray absorption fine structure analysis, it was discovered that 50% higher production of CdS_xSe_1-x quantum dots (QDs) was achieved in the ΔzntA cells than that in the WT cells. Moreover, the ΔzntA cells exhibited the same viability as the WT cells and the pYYDT-zntA cells because accumulated Cd ions were transformed into biocompatible QDs. In addition, the biosynthesized QDs had a uniform particle size (3.82 ± 0.53 nm) and a long fluorescence lifetime (45.6 ns), which could potentially be utilized for bio-imaging. These results not only elucidate the significance of Cd(II) efflux system in the biotransformation of Cd ions and selenite, but also provide a promising way to recover Cd and Se as valuable products in certain waste streams.

Fungal Tolerance: An Alternative for the Selection of Fungi with Potential for the Biological Recovery of Precious Metals

The behavior of various filamentous fungi in the presence of metals such as Cu, Zn, Ni, Fe, Mn, and V has been widely reported. However, there is little information regarding metals such as Au, Ag and Pt that are not in the form of nanoparticles. The growth of eight filamentous fungi was evaluated at increasing doses of Au, Ag and Pt. The fungi were reactivated in Petri dishes with potato dextrose agar. Subsequently, individual mycelial disks from each strain were inoculated in PDA plates with the following doses of AuCl3, Ag2SO4 and PtCl4: 0, 50, 150 and 300 mg L−1, respectively. The plates were then incubated for 20 days—a period in which the diameter of the colony was measured every 24 h. Au showed the highest toxicity for the tested fungi. All silver doses decreased the growth of most of the fungi, while platinum did not cause any inhibitory effect on the growth of the eight tested fungi. With a simple test, it was possible to observe the effect of precious metals (PMs) on the growth of filamentous fungi and consider their possible biotechnological applications in the recovery of PMs from primary or secondary sources.

Recent advances in the recovery of metals from waste through biological processes

Wastes containing critical metals are generated in various fields, such as energy and computer manufacturing. Metal-bearing wastes are considered as secondary sources of critical metals. The conventional physicochemical methods of metals recovery are energy-intensive and cause further pollution. Low-cost and eco-friendly technologies including biosorbents, bioelectrochemical systems (BESs), bioleaching, and biomineralization, have become alternatives in the recovery of critical metals. However, a relatively low recovery rate and selectivity severely hinder their large-scale applications. Researchers have expanded their focus to exploit novel strain resources and strategies to improve the biorecovery efficiency. The mechanisms and potential applicability of modified biological techniques for improving the recovery of critical metals need more attention. Hence, this review summarize and compare the strategies that have been developed for critical metals recovery, and provides useful insights for energy-efficient recovery of critical metals in future industrial applications.

Application of the kinetic and isotherm models for better understanding of the mechanism of biomineralization process induced by Purpureocillium lilacinum Y3

Purpureocillium lilacinum can promote the biomineralization of jarosite by secreting extracellular polymeric substances (EPS), but the detailed mechanism is not clear. In this study, the biosynthesis process of jarosite induced by P. lilacinum Y3 and hypha cell surface characterization were investigated. X-ray diffraction (XRD) analysis indicated that P. lilacinum Y3 could induce the formation of jarosite crystal and enhance mineralization kinetics. The kinetic and isotherm models confirmed that the metal ions transferring from the solution to the mycelium surface was controlled by diffusion process and the active interfacial sites on hypha cell surface played a pivotal role in the biomineralization process. Furthermore, transmission electron microscopy (TEM) pictures illustrated that the P. lilacinum Y3 mainly induced the generation of mineral precipitate extracellularly, but not intracellularly. Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectrum results further revealed the extracellular compounds such as fulvic-acid-like and protein-like substances participated in the mineralization process.

Biomineralization of Platinum by Escherichia coli

The widespread use of platinum in many industrial applications has led to its release into the environment at elevated concentrations with potential adverse effects on human and environmental health. However, the nature of interactions between mobile platinum complexes and the biotic components of the environment, which are increasingly being exposed to platinum, is poorly studied. The aim of this study was to assess the impact of Pt(IV)-chloride on the growth and activity of the well-characterized bacteria Escherichia coli. Bacterial survival and viability in the presence of different concentrations of Pt(IV)-chloride were assessed in liquid culture, while platinum retention was assessed using experimentation with sand-filled columns with the residual platinum concentration measured by atomic absorption spectroscopy. Bacterial biomineralization of platinum was studied with scanning electron microscopy. The results showed that E. coli tolerated PtCl4 at concentrations of up to 10,000 µM over 21 days and remained viable after 112 days of incubation with PtCl4 at 10,000 µM in sand columns. Overall, 74 wt.% and 50 wt.% of platinum was mineralized in E. coli and blank sand columns, respectively. The results of this study confirm that E. coli is capable of biomineralizing platinum. The results confirm that the interaction of platinum with bacteria is not limited to known metal-resistant bacterial species.

Genomic and Transcriptomic Changes that Mediate Increased Platinum Resistance in Cupriavidus metallidurans

The extensive anthropogenic use of platinum, a rare element found in low natural abundance in the Earth's continental crust and one of the critical raw materials in the EU innovation partnership framework, has resulted in increased concentrations in surface environments. To minimize its spread and increase its recovery from the environment, biological recovery via different microbial systems is explored. In contrast, studies focusing on the effects of prolonged exposure to Pt are limited. In this study, we used the metal-resistant Cupriavidus metallidurans NA4 strain to explore the adaptation of environmental bacteria to platinum exposure. We used a combined Nanopore⁻Illumina sequencing approach to fully resolve all six replicons of the C. metallidurans NA4 genome, and compared them with the C. metallidurans CH34 genome, revealing an important role in metal resistance for its chromid rather than its megaplasmids. In addition, we identified the genomic and transcriptomic changes in a laboratory-evolved strain, displaying resistance to 160 µM Pt4+. The latter carried 20 mutations, including a large 69.9 kb deletion in its plasmid pNA4_D (89.6 kb in size), and 226 differentially-expressed genes compared to its parental strain. Many membrane-related processes were affected, including up-regulation of cytochrome c and a lytic transglycosylase, down-regulation of flagellar and pili-related genes, and loss of the pNA4_D conjugative machinery, pointing towards a significant role in the adaptation to platinum.

Enhanced Removal of Dissolved Hg(II), Cd(II), and Au(III) from Water by Bacillus subtilis Bacterial Biomass Containing an Elevated Concentration of Sulfhydryl Sites

In this study, the sorption of Hg(II), Cd(II), and Au(III) onto Bacillus subtilis biomass with an elevated concentration of sulfhydryl sites, induced by adding excess glucose to the growth medium (termed 'High Sulfhydryl Bacillus subtilis' or HSBS) was compared to that onto B. subtilis biomass with a low concentration of sulfhydryl sites (termed 'Low Sulfhydryl Bacillus subtilis' or LSBS) and to sorption onto a commercially available cation exchange resin. Our results show that HSBS exhibits sorption capacities for the three studied metals that are two to five times greater than the sorption capacities of LSBS for these metals. After blocking the bacterial cell envelope sulfhydryl sites using a qBBr treatment, the sorption of the metals onto HSBS was significantly inhibited, indicating that the enhanced sorption onto HSBS was mainly due to the elevated concentration of sulfhydryl sites on the bacteria. A direct comparison of the removal capacity of the HSBS and that of the cation exchange resin for the three metals demonstrates that HSBS, compared to this commercially available resin, exhibits superior sorption capacity and selectivity for the removal of Hg(II), Cd(II), and Au(III), especially in systems with dilute metal concentrations. These results suggest that bacterial sulfhydryl sites control the sorption behavior of these three metals, and therefore biomass with induced high concentrations of sulfhydryl sites represents a promising and low cost biosorbent for the effective removal and recovery of chalcophile heavy metals from aqueous media.

Synthetic extreme environments: overlooked sources of potential biotechnologically relevant microorganisms

Synthetic extreme environments like carwash effluent tanks and drains are potential sources of biotechnologically important microorganisms and molecules which have, however, remained unexplored. Using culture‐ and molecular‐based methods, a total of 17 bacterial isolates belonging to the genera Shewanella, Proteus, Paenibacillus, Enterobacter and Citrobacter, Aeromonas, Pseudomonas and Pantoea were identified. Hydrocarbon utilization and enzyme production screening assays showed that Aeromonas sp. CAC11, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 and Citrobacter sp. PCW7 were able to degrade benzanthracene, naphthalene and diesel oil, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 could produce cellulase enzyme, while Proteus sp. BPS2, Pseudomonas sp. SAS8 and Proteus sp. CAL3 could produce lipase. GC‐MS analysis of bacterial secondary metabolites resulted in identification of 107 different compounds produced by Proteus sp. BPS2, Paenibacillus sp. CAC12, Pseudomonas sp. SAS8, Proteus sp. CAL3 and Paenibacillus sp. CAC13. Most of the compounds identified by both GC‐MS and LC‐MS have previously been determined to have antibacterial, antifungal and/or anticancer properties. Further, microbial metabolites which have previously been known to be produced only by plants or microorganisms found in natural extreme environments were also identified in this study. This research has revealed the immense bioresource potential of microorganisms inhabiting synthetic extreme environments.

Biological Recovery of Platinum Complexes from Diluted Aqueous Streams by Axenic Cultures

The widespread use of platinum in high-tech and catalytic applications has led to the production of diverse Pt loaded wastewaters. Effective recovery strategies are needed for the treatment of low concentrated waste streams to prevent pollution and to stimulate recovery of this precious resource. The biological recovery of five common environmental Pt-complexes was studied under acidic conditions; the chloro-complexes PtCl₄^2- and PtCl₆^2-, the amine-complex Pt(NH₃)₄Cl₂ and the pharmaceutical complexes cisplatin and carboplatin. Five bacterial species were screened on their platinum recovery potential; the Gram-negative species Shewanella oneidensis MR-1, Cupriavidus metallidurans CH34, Geobacter metallireducens, and Pseudomonas stutzeri, and the Gram-positive species Bacillus toyonensis. Overall, PtCl₄^2- and PtCl₆^2- were completely recovered by all bacterial species while only S. oneidensis and C. metallidurans were able to recover cisplatin quantitatively (99%), all in the presence of H₂ as electron donor at pH 2. Carboplatin was only partly recovered (max. 25% at pH 7), whereas no recovery was observed in the case of the Pt-tetraamine complex. Transmission electron microscopy (TEM) revealed the presence of both intra- and extracellular platinum particles. Flow cytometry based microbial viability assessment demonstrated the decrease in number of intact bacterial cells during platinum reduction and indicated C. metallidurans to be the most resistant species. This study showed the effective and complete biological recovery of three common Pt-complexes, and estimated the fate and transport of the Pt-complexes in wastewater treatment plants and the natural environment.

Competitive biosorption behavior of Pt(iv) and Pd(ii) by Providencia vermicola

Biosorption is an effective way to recover or remove metal ions from wastewater; however, the biosorption process in a multiple metal ion solution is still unclear.

Platinum recovery from industrial process streams by halophilic bacteria: Influence of salt species and platinum speciation

The increased use and criticality of platinum asks for the development of effective low-cost strategies for metal recovery from process and waste streams. Although biotechnological processes can be applied for the valorization of diluted aqueous industrial streams, investigations considering real stream conditions (e.g., high salt levels, acidic pH, metal speciation) are lacking. This study investigated the recovery of platinum by a halophilic microbial community in the presence of increased salt concentrations (10-80 g L^-1), different salt matrices (phosphate salts, sea salts and NH₄Cl) and a refinery process stream. The halophiles were able to recover 79-99% of the Pt at 10-80 g L^-1 salts and at pH 2.3. Transmission electron microscopy suggested a positive correlation between intracellular Pt cluster size and elevated salt concentrations. Furthermore, the halophiles recovered 46-95% of the Pt-amine complex Pt[NH₃]₄²⁺ from a process stream after the addition of an alternative Pt source (K₂PtCl₄, 0.1-1.0 g L^-1 Pt). Repeated Pt-tetraamine recovery (from an industrial process stream) was obtained after concomitant addition of fresh biomass and harvesting of Pt saturated biomass. This study demonstrates how aqueous Pt streams can be transformed into Pt rich biomass, which would be an interesting feed of a precious metals refinery.