Detection of the Antimicrobial Triclosan in Environmental Samples by Immunoassay

Development of Methyl Ester Antibody-Based Competitive Indirect ELISA for Quantitative Detection of Mitragynine in Human Urine

Mitragynine is the main psychoactive compound of Mitragyna speciosa Korth. (kratom). This alkaloid could render psychotropic effects and is often misused as a substitute for commercial drugs. Nowadays, the increasing popularity of kratom has led to the development of a rapid and effective detection method. The detection of mitragynine in a biological sample such as urine requires a highly sensitive and specific method due to the complex nature of mitragynine in urine. Enzyme-linked immunosorbent assay (ELISA) is well known as a rapid screening method for biological samples. In this study, a competitive indirect ELISA was successfully developed using MG-22-OCH3 IgG as a detection antibody for mitragynine in human urine. The mitragynine immunoassay showed a limit of detection and a limit of quantification of 0.412 and 1.25 μg/mL, respectively. The measurement range was between 0.01 and 100.0 μg/mL, with a minimal inhibition (IC50) value of 0.152 μg/mL. The developed ELISA was validated using a gold method such as high-performance liquid chromatography-mass spectrometry (HPLC-MS). The percentage of recovery and the coefficient of variation (CV) for the ELISA and LCMS/MS analyses were 84.0-95.70%, 99.20-112.0%, 7.69-9.78%, and 2.86-6.62%, respectively. This indicates that the developed ELISA is a reliable method that can be used as a rapid approach for quantifying mitragynine content in biological samples.

Bimetallic nanozyme triple-emission fluorescence intelligent sensing platform-integrated molecular imprinting for ultrasensitive visual detection of triclosan

Triclosan (TCS) is an endocrine disruptor, which has been widely used in daily chemicals, resulting in the potential risk to the ecosystem and human health. Herein, a smartphone-integrated bimetallic nanozyme triple-emission fluorescence capillary imprinted sensing system was developed for ultrasensitive and intelligent visual microanalysis of TCS. Carbon dots (CDs) and bimetallic organic framework (MOF-(Fe/Co)-NH2) were used as fluorescence sources to synthesize nanozyme fluorescence molecularly imprinted polymer (MOF-(Fe/Co)-NH2@CDs@NMIP), which oxidized o-phenylenediamine to 2,3-diaminophenazine (OPDox), resulting in the derivation of a new fluorescence peak at 556 nm. In the existence of TCS, the fluorescence of MOF-(Fe/Co)-NH2 at 450 nm was restored, the fluorescence of OPDox at 556 nm was suppressed, and the CDs fluorescence of at 686 nm remained constant. The color of triple-emission fluorescence imprinted sensor varied from yellow to pink to purple to blue. The response efficiency (F450/F556/F686) of this sensing platform based on the capillary waveguide effect demonstrated a significant linear relationship toward the concentration of TCS ranged from 1.0 × 10-12 to 1.5 × 10-10 M with the LOD of 8.0 × 10-13 M. Compared with dual-emission capillary fluorescence sensor, this sensing system has higher sensitivity and richer visual color. Combined with the smartphone-integrated portable sensing platform, the color of fluorescence was transformed into an RGB value to calculate TCS concentration with the LOD of 9.6 × 10-13 M, providing a novel method for intelligent visual microanalysis (18 μL/time) of environmental pollutants.

Triclosan and related compounds in the environment: Recent updates on sources, fates, distribution, analytical extraction, analysis, and removal techniques

Triclosan (TCS) has been widely used in daily life because of its broad-spectrum antibacterial activities. The residue of TCS and related compounds in the environment is one of the critical environmental safety problems, and the pandemic of COVID-19 aggravates the accumulation of TCS and related compounds in the environment. Therefore, detecting TCS and related compound residues in the environment is of great significance to human health and environmental safety. The distribution of TCS and related compounds are slightly different worldwide, and the removal methods also have advantages and disadvantages. This paper summarized the research progress on the source, distribution, degradation, analytical extraction, detection, and removal techniques of TCS and related compounds in different environmental samples. The commonly used analytical extraction methods for TCS and related compounds include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and so on. The determination methods include liquid chromatography coupled with different detectors, gas chromatography and related methods, sensors, electrochemical method, capillary electrophoresis. The removal techniques in various environmental samples mainly include biodegradation, advanced oxidation, and adsorption methods. Besides, both the pros and cons of different techniques have been compared and summarized, and the development and prospect of each technique have been given.

Dual amplified ratiometric fluorescence ELISA based on G-quadruplex/hemin DNAzyme using tetrahedral DNA nanostructure as scaffold for ultrasensitive detection of dibutyl phthalate in aquatic system

Dibutyl phthalate (DBP) is considered as one of the most widely used phthalate esters (PAEs), which has attracted worldwide concerns because of its potential threats to eco-environments and human health. Systematic investigations of DBP environmental occurrence contribute to the further risk assessment, which depends on effective and available analytical methods. In this study, an amplified ratiometric fluorescence ELISA was established for sensitive and high-throughput detection of DBP in the aquatic system based on a novel tetrahedral DNA nanostructure (TDN)-scaffolded-DNAzyme (Tetrazyme). Wherein, Tetrazyme was prepared by the precise folding of G-quadruplex sequence on three vertex angles of the TDN, together with hemin as the horseradish peroxidase (HRP)-mimicking enzyme. The rigid TDN avoided the local overcrowding effect to provide a reasonable spatial spacing on the interface for G-quadruplex sequence, increasing the collision chance between DNAzyme and substrates, improving the catalytic ability of DNAzyme effectively. Besides, streptavidin (SA) and biotin (bio) were used to anchor TDN and antibody, in which the specific binding of SA/bio could make more Tetrazyme conjugate on each signal element, resulting in the dual signal amplification. Meanwhile, the accuracy and precision were enhanced owing to the inherent built-in rectification to the environment from the dual output ratiometric fluorescence assay. Under the optimized conditions, the detection limit of this proposed method was 0.17 ng/mL (16 times lower than that of conventional ELISA using the same antibody) with a satisfactory accuracy (recoveries, 79.0%- 116.2%; CV, 2.1-6.5%). Overall, this platform provides a promising way for accurate, sensitive and rapid determination of DBP from environmental waters.

Sensitive and selective determination of triclosan using visual spectroscopy

Triclosan is a commonly used biocide effective against bacterial and fungal infections. However, its overuse in pharmaceutical and personal care products has resulted in its abundance in the natural environment. The detection of triclosan by visual spectroscopy can be carried out using the azo-coupling reaction of diazonium complexes. However, the reaction is also common to other phenolic compounds and aromatic amines, posing significant challenge. In this work, we investigate the azo-coupling reaction of triclosan and several commonly occurring analogous compounds to develop an improved spectroscopic method for the selective determination of triclosan without interference. We find that the azo-coupling reaction between the diazotized derivative and the phenolic compounds is highly dependent on the pH of the reaction media. At pH 7.2, the absorbance of the azo dye product of triclosan shows a peak at 452 nm which has minimal interference from other phenolic azo-dye products with the exception of naphthol. Naphthol shows an interference corresponding to 58% of the analytical signal of equimolar triclosan concentration. To overcome this, we develop an analytical model for the simultaneous determination of triclosan and naphthol from mixed solutions of the compounds. A linear calibration plot from 1.7 to 34 µM was obtained for both triclosan and naphthol with limit-of-detection (LOD) of 0.62 µM and 1.03 µM respectively. The developed protocol was tested for the analysis of water samples collected from various environmental sources spiked with different concentrations of triclosan and naphthol. The samples were enriched by solid-phase-extraction which allowed a 50-fold enhancement in detection of triclosan. The average relative recovery of triclosan in real samples was found to be 98.6% .

Selection and characterisation of triclosan-specific aptamers using a fluorescence microscope-imaging assay

This study reports a fluorescence microscope-imaging assay for determining the binding characteristics of single-stranded DNA aptamers selected against the antibacterial agent, triclosan. The imaging assay utilises fluorescently labelled aptamers and target-immobilised matrices. Upon binding of triclosan-specific aptamers to triclosan-conjugated matrices, the binding complex was visualised and the image was captured with the aid of a fluorescence microscope. Subsequently, the fluorescent intensities of aptamer-bound matrices were analysed using dedicated image-processing software and correlated to known concentrations of selected input aptamers. Thus, by plotting fluorescence intensities against different aptamer concentrations, binding isotherms were generated to determine aptamer K_d values. The imaging assay was applied to characterise the binding affinities and specificities of ten triclosan-specific aptamers H1-H10. One of the candidate aptamers, H6, showed a K_d value of 378 nM, which was comparable with previously published K_d values for aptamer-generated against triclosan analogous. In addition, the utility of the imaging assay for aptamer characterisation was compared with a commonly used affinity column-binding assay. It was concluded that the imaging assay was superior to alternative assays in terms of accuracy, simplicity, and reproducibility.

Rapid capture and SERS detection of triclosan using a silver nanoparticle core - protein satellite substrate

Triclosan (TCS) is a synthetic antimicrobial compound that has been widely used in consumer products. However, increasing evidence suggests adverse effects of TCS to human health and environment, raising great public concerns. The existing methods for detecting TCS are limited to time-consuming and complicated procedure. Here, we developed a rapid method for capture and detection of TCS using surface-enhanced Raman spectroscopy (SERS) based on a silver nanoparticle (Ag NP) core - protein satellite nanostructure. Bovine serum albumin (BSA) assembled on Ag NPs as satellites configuration could anchor a large number of TCS molecules close to the surface of Ag NPs, producing amplified SERS signals. As low as 50 nM TCS standard was successfully detected within 30 min. We also demonstrated its capability for TCS detection in pond water. The developed SERS method holds a great promise for rapid screening of TCS in environmental and food samples.

Toxicological responses, bioaccumulation, and metabolic fate of triclosan in Chlamydomonas reinhardtii

Triclosan (TCS) is a broad-spectrum antimicrobial agent that is broadly used in personal care products. It has been shown to cause the contamination of a variety of aquatic environments. Since algae has been the primary producers of aquatic ecosystems, understanding the toxicological mechanisms and the metabolic fate of TCS is vital for assessing its risk in an aquatic environment. In our study, 0.5-4 mg L^-1 TCS treatments for 72 h in a culture of Chlamydomonas reinhardtii (C. reinhardtii) showed progressive inhibition of cell growth and reduced the chlorophyll content. The EC₅₀ value of C. reinhardtii after 72 h was 1.637 mg L^-1, which showed its higher level of resistance to TCS in comparison with other algal species. The exposure to TCS led to oxidative injuries of algae in relation to the increment of malonaldehyde content, cell membrane permeability, and H₂O₂ levels. Furthermore, the oxidative stress from TCS stimulated a series of antioxidant enzyme activities and their gene expressions. Simultaneously, the accumulated TCS in C. reinhardtii arouses the detoxification/degradation-related enzymes and related gene transcriptions. In the medium, approximately 82% of TCS was removed by C. reinhardtii. Importantly, eight TCS metabolites were identified by ultra-performance liquid chromatography-high-resolution mass spectrometry and their relative abundances were measured in a time-course experiment. Six of these metabolites are reported here for the first time. The metabolic pathways of triclosan via C. reinhardtii including reductive dechlorination, hydroxylation, sulfhydrylation, and binding with thiol/cysteine/GSH/glycosyl were manifested to broaden our understanding of the environmental fate of TCS. Graphical Abstract.

An Immunoaffinity Purification Method for the Simultaneous Analysis of Triclocarban and Triclosan in Foodstuffs by Liquid Chromatography Tandem Mass Spectrometry

Triclocarban (TCC) and triclosan (TCS) have been simultaneously detected in five kinds of foodstuffs using an immunoaffinity purification method coupled with ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the first time. Two highly specific monoclonal antibodies against TCC and TCS were produced and coupled to N-hydroxysuccinimide-activated Sepharose 6B gel to prepare the immunosorbent. Under the optimal conditions, mean recoveries from spiked samples by the IAC-UHPLC-MS/MS method were 70.1-92.8% for TCC and 76.6-102.5% for TCS. Intraday relative standard deviations were below 14.5%. The limits of quantification (LOQs) of TCC were 1 ng/L for beverage samples and 0.01-0.02 μg/kg for food samples. The LOQs of TCS were 0.03 μg/L for beverage samples and 0.2-0.3 μg/kg for food samples. The applicability of the method has been proven by analyzing TCC and TCS in different samples from supermarkets in Beijing. The proposed method is sufficiently sensitive and reliable for monitoring trace concentrations of TCC and TCS in food samples.

Fluorescence Optosensing of Triclosan by Upconversion Nanoparticles with Potassium Permanganate

It is greatly significant to develop a simple and rapid sensing method for triclosan (TCS) because it is a widely used and a chronically toxic compound that adversely affects biological organisms and human health. This paper presents the design and development of a novel simple optosensor that uses carboxylic group-functionalized NaYF₄:Yb³⁺/Er³⁺ upconversion nanoparticles (UCNPs) coated with potassium permanganate (KMnO₄). The sensor enables the rapid, non-autofluorescence, sensitive, and selective detection of TCS based on the "turn off-on fluorescence" technique through fluorescence resonance energy transfer. Under an near-infrared radiation excitation (980 nm), the "turn-off fluorescence" process involves the transfer of fluorescence resonance energy between the UCNPs and KMnO₄, whereas the "turn-on fluorescence" process occurs when KMnO₄ is reduced in the presence of TCS. TCS was detected by recovering the green emission of UCNPs. Under optimized conditions, the resulting sensor offered an excellent response to TCS with 0.2 μM of a limit of detection. The developed sensor showed higher selectivity to TCS than other phenolic compounds. Moreover, the analytical performance of the proposed probe was practically demonstrated to successfully monitor trace levels of TCS in samples of tap water and personal care products. The developed simple and sensitive method may offer a new approach for determining TCS in environmental applications.

Urinary bisphenol analogues and triclosan in children from south China and implications for human exposure

Bisphenols and triclosan (TCS) are widely used in consumer products. However, knowledge on human exposure to these anthropogenic chemicals has remained limited in China, especially for children. In this study, concentrations of seven bisphenols and TCS were determined in 283 urine samples collected from South China children aged between 3 and 11 years old. Bisphenol A (BPA), bisphenol S (BPS) and TCS were frequently detected in urine samples, with a detection rate of 93%, 89%, and 95%, respectively. Urinary concentrations of Σ₇BPs (the sum concentrations of the seven bisphenols) ranged from 0.43 to 31.5 μg/L, with a median value of 0.91 μg/L, while TCS concentrations ranged from < limit of quantification to 21.9 μg/L (median: 0.21 μg/L). BPA was the predominant analogue (median: 0.35 μg/L), accounting for 49.8% of Σ₇BPs. The urinary BPA concentrations in children from Guangzhou were significantly greater than those from Shenzhen. Correlation analysis suggested that multiple exposure sources to South China children likely existed for BPA, BPS, and TCS. Age, but not gender, was negatively associated with urinary residues of BPA and BPS (p < 0.05) and positively with TCS concentrations (p < 0.05). The estimated daily intake of Σ₇BPs (23.9 ng/kg bw/day) or TCS (5.63 ng/kg bw/day) was below the tolerant reference dose of BPA, indicating no considerable health hazard to South China children.

Sustainable exposure prevention through innovative detection and remediation technologies from the NIEHS Superfund Research Program

Innovative devices and tools for exposure assessment and remediation play an integral role in preventing exposure to hazardous substances. New solutions for detecting and remediating organic, inorganic, and mixtures of contaminants can improve public health as a means of primary prevention. Using a public health prevention model, detection and remediation technologies contribute to primary prevention as tools to identify areas of high risk (e.g. contamination hotspots), to recognize hazards (bioassay tests), and to prevent exposure through contaminant cleanups. Primary prevention success is ultimately governed by the widespread acceptance of the prevention tool. And, in like fashion, detection and remediation technologies must convey technical and sustainability advantages to be adopted for use. Hence, sustainability - economic, environmental, and societal - drives innovation in detection and remediation technology. The National Institute of Health (NIH) National Institute of Environmental Health Sciences (NIEHS) Superfund Research Program (SRP) is mandated to advance innovative detection, remediation, and toxicity screening technology development through grants to universities and small businesses. SRP recognizes the importance of fast, accurate, robust, and advanced detection technologies that allow for portable real-time, on-site characterization, monitoring, and assessment of contaminant concentration and/or toxicity. Advances in non-targeted screening, biological-based assays, passive sampling devices (PSDs), sophisticated modeling approaches, and precision-based analytical tools are making it easier to quickly identify hazardous "hotspots" and, therefore, prevent exposures. Innovation in sustainable remediation uses a variety of approaches: in situ remediation; harnessing the natural catalytic properties of biological processes (such as bioremediation and phytotechnologies); and application of novel materials science (such as nanotechnology, advanced membranes, new carbon materials, and materials reuse). Collectively, the investment in new technologies shows promise to reduce the amount and toxicity of hazardous substances in the environment. This manuscript highlights SRP funded innovative devices and tools for exposure assessment and remediation of organic, inorganic, and mixtures of contaminants with a particular focus on sustainable technologies.