Real-Time Imaging Revealed That Exoelectrogens from Wastewater Are Selected at the Center of a Gradient Electric Field

Establishing electro-functionalized gravity-driven ceramic membrane filtration (EGDCM) for decentralized treatment of algae-laden brackish water: Comparison of in-situ electro-oxidation and ex-situ electro-coagulation

Algae-laden brackish water (ABW) has remarkably threatened drinking water safety in warm coastal areas. Although gravity-driven ceramic membrane filtration (GDCM) exhibits high potential in ABW treatment during decentralized water supply, membrane fouling is still a critical problem. Herein, GDCM was skillfully electro-functionalized (EGDCM) by in-situ electro-oxidation (ISEO) based on self-fabricated Ti/SnO2-Sb dimensionally stable anode (DSA) (EO-EGDCM) and ex-situ electro-coagulation (ESEC) based on iron anode (EC-EGDCM) in this study. EO-EGDCM with KMnO4 augment (MnEO-EGDCM) was also established for comparison. Results show that ISEO increased GDCM membrane permeability by 22 %, while EC-EGDCM membrane flux was nearly 4.8 times that of GDCM. ISEO enhanced the early removal of organic pollution, and KMnO4 facilitated the active chlorine oxidization of ammonia and algal toxins on electrified Ti/SnO2-Sb DSA by suppressing the transformation of free chlorine to less reactive chloramines. Both algae cell permeabilization and intracellular organic matter release were enhanced by ISEO. But SEM-EDS, CLSM and biomass analysis evidenced that membrane biological process, which was improved by 32 %∼323 % by electrical stimulation, developed porous structures in the fouling layer in EO-EGDCM/MnEO-EGDCM. According to energy consumption and carbon emissions evaluation, GDCM was confirmed as an energy-saving system for treating ABW with the consumption of only 3.47 × 10-3 kWh/m3. Electricity demand was increased for EGDCM but still considerably lower than that for other algae-laden water treatment processes. EC-EGDCM reduced energy consumption and carbon emission by around 80 % compared to EC-EGDCM/MnEO-EGDCM. Electro-functionalization was a promising option to improve GDCM treatment of ABW via multiple mechanisms but further optimization was still required.

Linking proteomic function and structure to electroactive biofilms development across electrode orientations

The functionality of electroactive biofilms (EABs) is profoundly influenced by the proteomic dynamics within microbial communities, particularly through the participation of proteins in electron transfer. This study explored the impact of electrode surface orientation, measured by varying oblique angles, on the performance of EABs in bioelectrochemical systems (BES). Utilizing quantitative proteomics, results indicated that a slightly oblique angle (45°) optimized the spatial arrangement of microbial cells, enhancing electron transport efficiency compared to other angles tested. Specifically, the 45° orientation resulted in a 2.36-fold increase in the abundance of c-type cytochromes compared to the 90°. Additionally, Geobacter, showed a relative abundance of 83.25 % at 45°, correlating with a peak current density of 1.87 ± 0.04 A/m2. These microbial and proteomic adaptations highlighted the intricate balance between microbial behavior and the physical environment, which could be tuned to optimize operations. The findings provided new insights into the design and enhancement of BES.

Natural defence mechanisms of electrochemically active biofilms: From the perspective of microbial adaptation, survival strategies and antibiotic resistance

Electrochemically active biofilms (EABs) play an ever-growingly critical role in the biological treatment of wastewater due to its low carbon footprint and sustainability. However, how the multispecies biofilms adapt, survive and become tolerant under acute and chronic toxicity such as antibiotic stress still remains well un-recognized. Here, the stress responses of EABs to tetracycline concentrations (CTC) and different operation schemes were comprehensively investigated. Results show that EABs can quickly adapt (start-up time is barely affected) to low CTC (≤ 5 μM) exposure while the adaptation time of EABs increases and the bioelectrocatalytic activity decreases at CTC ≥ 10 μM. EABs exhibit a good resilience and high anti-shocking capacity under chronic and acute TC stress, respectively. But chronic effects negatively affect the metabolic activity and extracellular electron transfer, and simultaneously change the spatial morphology and microbial community structure of EABs. Particularly, the typical exoelectrogens Geobacter anodireducens can be selectively enriched under chronic TC stress with relative abundance increasing from 45.11% to 85.96%, showing stronger TC tolerance than methanogens. This may be attributed to the effective survival strategies of EABs in response to TC stress, including antibiotic efflux regulated by tet(C) at the molecular level and the secretion of more extracellular proteins in the macro scale, as the C=O bond in amide I of aromatic amino acids plays a critical role in alleviating the damage of TC to cells. Overall, this study highlights the versatile defences of EABs in terms of microbial adaptation, survival strategies, and antibiotic resistance, and deepens the understanding of microbial communities' evolution of EABs in response to acute and chronic TC stress.

Towards rapid formation of electroactive biofilm: insights from thermodynamics and electric field manipulation

Electroactive biofilm (EAB) has garnered significant attention due to its effectiveness in pollutant remediation, electricity generation, and chemical synthesis. However, achieving precise control over the rapid formation of EAB presents challenges for the practical implementation of bioelectrochemical technology. In this study, we investigated the regulation of EAB formation by manipulating applied electric potential. We developed a modified XDLVO model for the applied electric field and quantitatively assessed the feasibility of existing rapid formation strategies for EAB. Our results revealed that electrostatic (EL) force significantly influenced EAB formation in the presence of the applied electric field, with the potential difference between the electrode and the microbial solution being the primary determinant of EL force. Compared to -0.2 V and 0 V vs.Ag/AgCl, EAB exhibited the highest electrochemical performance at 0.2 V vs.Ag/AgCl, with a maximum current density of 6.044 ± 0.10 A/m2, surpassing that at -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl by 1.73 times and 1.31 times, respectively. Furthermore, EAB demonstrated the highest biomass accumulation, measuring a thickness of 25 ± 2 μm at 0.2 V vs. Ag/AgCl, representing increases of 1.67 and 1.25 times compared to -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl, respectively. The strong electrostatic attraction under the anodic potential promoted the formation of a monolayer of biofilm. Additionally, the hydrophilicity and hydrophobicity of the biofilm were altered following inversion culture. The Lewis acid-base (AB) attraction offset the electrostatic repulsion caused by negative charges, it is beneficial for the formation of biofilms. This study, for the first time, elucidated the difference in the formation of cathode and anode biofilm from a thermodynamic perspective in the context of electric field introduction, laying the theoretical foundation for the directional regulation of the rapid formation of typical electroactive biofilms.

Enhancing the microbial advanced oxidation of P-nitrophenol in sediment through accelerating extracellular respiration with electrical stimulation

Microbial advanced oxidation, a fundamental process for pollutant degradation in nature, is limited in efficiency by the weak respiration of indigenous microorganisms. In this study, an electric field was employed to enhance microbial respiration and facilitate the microbial advanced oxidation of p-nitrophenol (PNP) in simulated wetlands with alternation of anaerobic and aerobic conditions. With intermittent air aeration, an electric field of 0.8 V promoted extracellular electron transfer to increase Fe2+ generation through dissimilatory iron reduction and the production of hydroxyl radicals (•OH) through Fenton-like reactions. As a result, the PNP removal rate of the electrically-stimulated group was higher than that of the control (72.15 % vs 46.88 %). Multiple lines of evidence demonstrated that the electrically-induced polarization of respiratory enzymes expedited proton-coupled electron transfer within the respiratory chain to accelerate microbial advanced oxidation of PNP. The polarization of respiratory enzymes with the electric field hastened proton outflow to increase cell membrane potential for adenosine triphosphate (ATP) generation, which enhanced intracellular electron transportation to benefit reactive oxygen species generation. This study provided a new method to enhance microelectrochemical remediation of the contaminant in wetlands via the combination of intermittent air aeration.

Enhanced Stability and Detection Range of Microbial Electrochemical Biotoxicity Sensor by Polydopamine Encapsulation

With the rapid development of modern industry, it is urgently needed to measure the biotoxicity of complex chemicals. Microbial electrochemical biotoxicity sensors are an attractive technology; however, their application is usually limited by their stability and reusability after measurements. Here, we improve their performance by encapsulating the electroactive biofilm with polydopamine (PDA), and we evaluate the improvement by different concentrations of heavy metal ions (Cu2+, Ag+, and Fe3+) in terms of inhibition ratio (IR) and durability. Results indicate that the PDA-encapsulated sensor exhibits a more significant detection concentration than the control group, with a 3-fold increase for Cu2+ and a 1.5-fold increase for Ag+. Moreover, it achieves 15 more continuous toxicity tests than the control group, maintaining high electrochemical activity even after continuous toxicity impacts. Images from a confocal laser scanning microscope reveal that the PDA encapsulation protects the activity of the electroactive biofilm. The study, thus, demonstrates that PDA encapsulation is efficacious in improving the performance of microbial electrochemical biotoxicity sensors, which can extend its application to more complex media.

Enhancing CH4 production in microbial electrolysis cells: Optimizing electric field via carbon cathode resistivity

Microbial electrolysis cells (MECs) are increasingly recognized as a promising technology for converting CO2 to CH4, offering the dual benefits of energy recovery from organic wastewater and CO2 emission reduction. A critical aspect of this technology is the enhancement of the electron-accepting capacity of the methanogenic biocathode to improve CH4 production efficiency. This study demonstrates that adjusting the cathode resistivity is an effective way to control the electric field intensity, thereby enhancing the electron accepting capacity and CH4 production. By maintaining the electric field intensity within approximately 8.50-10.83 mV·cm-1, the CH4 yield was observed to increase by up to two-fold. The improvement in CH4 production under optimized electric field conditions was attributed to the enhancement of the direct accepting capacity of the biocathode. This enhancement was primarily due to an increase in the relative abundance of Methanosaeta by approximately 10 % and an up to 83.78 % rise in the electron-accepting capacity of the extracellular polymeric substance. These insights offer a new perspective on the operation of methanogenic biocathodes and propose a novel biocathode construction methodology based on these findings, thus contributing to the enhancement of MEC efficiency.

Layered Design of a Highly Repeatable Electroactive Biofilm for a Standardized Biochemical Oxygen Demand Sensor

Microbial electrochemical sensors are promising to monitor bioavailable organics in real environments, but their application is restricted by the unpredictable performance of the electroactive biofilm (EAB), which is randomly acclimated from environmental microflora. With a long-term stable EAB as a template, we successfully designed EAB (DEAB) by the sequential growth of Geobacter anodireducens and automatched microbes, achieving a reproducible high current than those naturally acclimated from wastewater (NEAB). Pre-inoculation of planktonic aerobes as oxygen bioscavengers was necessary to ensure the colonization of Geobacter in the inner layer, and the abundant Geobacter (50%) in DEAB guaranteed 4 times higher current density with a 15-fold smaller variation among 20 replicates than those of NEAB. The sensor constructed with DEAB exhibited a shorter measuring time and a precise biochemical oxygen demand (BOD) measurement with acetate, real domestic wastewater, and supernatant of anaerobic digestion. Here, we for the first time proposed an applicable strategy to standardize EABs for BOD sensors, which is also crucial to ensure a stable performance of all bioelectrochemical technologies.

Reduction of S0 deposited on electroactive biofilm under an oxidative potential

The inevitable deposition of S⁰ on the electroactive biofilm (EAB) via anodic sulfide oxidation affects the stability of bioelectrochemical systems (BESs) when an accidental discharge of sulfide occurred, leading to the inhibition of electroacitivity, because the potential of anode (e.g., 0 V versus Ag/AgCl) is ~500 mV more positive than the redox potential of S^2-/S⁰. Here we found that S⁰ deposited on the EAB can be spontaneously reduced under this oxidative potential independent of microbial community variation, leading to a self-recovery of electroactivity (> 100 % in current density) with biofilm thickening (~210 μm). Transcriptomics of pure culture indicated that Geobacter highly expressed genes involving in S⁰ metabolism, which had an additional benefit to improve the viability (25 % - 36 %) of bacterial cells in biofilm distant from the anode and the cellular metabolic activity via electron shuttle pair of S⁰/S^2-(S_x^2-). Our findings highlighted the importance of spatially heterogeneous metabolism to its stability when EABs encountered with the problem of S⁰ deposition, and that in turn improved the electroactivity of EABs.

Prophage Induction Causes Geobacter Electroactive Biofilm Decay

Sustaining a metabolically active electroactive biofilm (EAB) is essential for the high efficiency and durable operation of microbial fuel cells (MFCs). However, EABs usually decay during long-term operation, and, until now, the causes remain unknown. Here, we report that lysogenic phages can cause EAB decay in Geobacter sulfurreducens fuel cells. A cross-streak agar assay and bioinformatic analysis revealed the presence of prophages on the G. sulfurreducens genome, and a mitomycin C induction assay revealed the lysogenic to lytic transition of those prophages, resulting in a progressive decay in both current generation and the EAB. Furthermore, the addition of phages purified from decayed EAB resulted in accelerated decay of the EAB, thereafter contributing to a faster decline in current generation; otherwise, deleting prophage-related genes rescued the decay process. Our study provides the first evidence of an interaction between phages and electroactive bacteria and suggests that attack by phages is a primary cause of EAB decay, having significant implications in bioelectrochemical systems.

Electrostimulation triggers an increase in cross-niche microbial associations toward enhancing organic nitrogen wastewater treatment

As an efficient wastewater pretreatment biotechnology, electrostimulated hydrolysis acidification (eHA) has been used to accelerate the removal of refractory pollutants, which is closely related to the effects of electrostimulation on microbial interspecies associations. However, the ecological processes underpinning such linkages remain unresolved, especially for the microbial communities derived from different niches, such as the electrode surface and plankton. Herein, the principles of cross-niche microbial associations and community assembly were investigated using molecular ecological network and phylogenetic bin-based null model analysis (iCAMP) based on 16S rRNA gene sequences. The electrostimulated planktonic sludge and electrode biofilm displayed significantly (P < 0.05) 1.67 and 1.53 times higher organic nitrogen pollutant (azo dye Alizarin Yellow R) degradation efficiency than non-electrostimulation group, and the corresponding microbial community composition and structure were significantly (P < 0.05) changed. Electroactive bacteria and functional degraders were enriched in the electrode biofilm and planktonic sludge, respectively. Notably, electrostimulation strengthened the synergistic microbial associations (1.8 times more links) between sludge and biofilm members. Additionally, both electrostimulation and cross-niche microbial associations induced greater importance of deterministic assembly. Overall, this study highlights the specificity of cross-electrode surface microbial associations and ecological processes with electrostimulation and advances our understanding of the manipulation of sludge microbiomes in engineered wastewater treatment systems.

Endogenous electric field accelerates phenol degradation in bioelectrochemical systems with reduced electrode spacing

Reducing the electrode spacing in bioelectrochemical systems (BESs) are widely reported to improve power output, which was mainly attributed to the decrease of ohmic resistance (R_ohm) for a long time. Here we found the change of endogenous electric field (EF) intensity was the key to improve electroactivity in response to a reduced electrode spacing, which also accelerated phenol biodegradation. Correlation and principal components analysis revealed that the microbial community of electroactive biofilm (EAB) was independent of R_ohm, while the EF intensity was found closely related to most of predominant genera. A strong EF selectively enriched phenol-degrading bacteria Comamonas in suspension and Geobacter in EAB, contributed to the improvement of degradation efficiency. EF also induced the secretion of extracellular polymeric substances, protected EAB from being inactivated by phenol. Our findings highlighted the importance of EF intensity on BESs performance, providing new insights into the design and application of BESs in wastewater treatment.

High current density with spatial distribution of Geobacter in anodic biofilm of the microbial electrolysis desalination and chemical-production cell with enlarged volumetric anode

The aim of this study was to establish the relationship between spatial distribution of Geobacter and electric intensity in the microbial electrolysis desalination and chemical-production cell (MEDCC) and to investigate the effect of enlarged volumetric anode on the performance of MEDCC. The MEDCC was constructed with nine carbon brush anodes (length × diameter = 11 cm × 3 cm) as enlarged volumetric anode, and operated by feeding with 1 g/L acetate as substrate and 35 g/L NaCl as artificial seawater under the applied voltages of 1.2-4.5 V. Spatial distribution of Geobacter in the anodic biofilm was determined according to the bacterial community analysis on 27 biofilm samples from the top, middle and bottom layers of anodes (i.e., with distance of 4.5, 10, and 15.5 cm to the cathode, respectively). Results showed that the enlarged volumetric anode significantly improved the performance of MEDCC. The maximum desalination rate and current density reached 338.5 ± 21.8 mg/L∙h and 55.7 ± 3.7 A/m² in the MEDCC, respectively. The electric intensity values decreased with the distance from the anode to the cathode and formed an uneven distribution in the anode chamber. The samples in the top layer of anodes had the highest average 16S rRNA gene copy number of Geobacter of 1.55 × 10⁷ copies/μL, which was 18 times higher than that in the bottom layer of anodes. A linear relation was established between the spatial distribution of Geobacter and electric intensity (R² = 0.994-0.999). The electric intensity gradient created the uneven spatial distribution of Geobacter in the biofilms of volumetric anode. Results from this study could be useful to enrich Geobacter in the anodic biofilm thus to improve the performance of MEDCC.

Light alters microbiota and electron transport: Evidence for enhanced mesophilic digestion of municipal sludge

Light as an environmental factor can affect the process of anaerobic digestion, but there is no systematic study in municipal wastewater sludge mesophilic digestion. In this study, the effects of light on the performance of the anaerobic digestion system and photo-anaerobic microbiota (PAM) were evaluated in lighted anaerobic batch digesters (LABRs). The methane yield from the reactor under the dark condition (LABR0) was 179.2 mL CH₄/g COD, which was lower than 305.4 mL CH₄/g COD and 223.0 mL CH₄/g COD (n = 3, p < 0.05) from reactors under the light intensity of 3600 lm (LABR1) and 7200 lm (LABR2), respectively. The dominant genera in the bacterial and archaeal communities were Bacillus and Methanosarcina under light conditions, Enterococcus and Methanobacterium under dark conditions. And these two bacteria acted as electroactive bacterial genera, indicating that light changes the combination of direct interspecies electron transfer (DIET) microbial partners and activates the DIET pathway for methane production. The electron conduction pathways analysis further suggests that biological DIET (bDIET) between microbial biomass, rather than DIET via conductive material (cDIET) between microbes and conductive materials, is promoted and behaves as the dominant factor enhancing methane production under light conditions. The morphology of microorganisms and the amount and properties of EPS corroborate these views. Our findings are guided to anaerobic digester constructions under the outdoor environment with light exposure.

Two key Geobacter species of wastewater-enriched electroactive biofilm respond differently to electric field

Electroactive biofilms have attracted increasing attention due to their unique ability to exchange electrons with electrodes. Geobacter spp. are widely found to be dominant in biofilms in acetate-rich environments when an appropriate voltage is applied, but it is still largely unknown how these bacteria are selectively enriched. Herein, two key Geobacter spp. that have been demonstrated predominant in wastewater-enriched electroactive biofilm after long-term operation, G. sulfurreducens and G. anodireducens, responded to electric field (EF) differently, leading to a higher abundance of EF-sensitive G. anodireducens in the strong EF region after cocultivation with G. sulfurreducens. Transcriptome analysis indicated that two-component systems containing sensor histidine kinases and response regulators were the key for EF sensing in G. anodireducens rather than in G. sulfurreducens, which are closely connected to chemotaxis, c-di-GMP, fatty acid metabolism, pilus, oxidative phosphorylation and transcription, resulting in an increase in extracellular polymeric substance secretion and rapid cell proliferation. Our data reveal the mechanism by which EF select specific Geobacter spp. over time, providing new insights into Geobacter biofilm formation regulated by electricity.

Physiological metabolism of electrochemically active bacteria directed by combined acetate and Cd(II) in single-chamber microbial electrolysis cells

It is of great interest to explore physiological metabolism of electrochemically active bacteria (EAB) for combined organics and heavy metals in single-chamber microbial electrolysis cells (MECs). Four pure culture EAB varying degrees responded to the combined acetate (1.0-5.0 g/L) and Cd(II) (20-150 mg/L) at different initial concentrations in the single-chamber MECs, shown as significant relevance of Cd(II) removal (2.57-7.35 mg/L/h) and H₂ production (0-0.0011 m³/m³/h) instead of acetate removal (73-130 mg/L/h), to these EAB species at initial Cd(II) below 120 mg/L and initial acetate below 3.0 g/L. A high initial acetate (5.0 g/L) compensated the Cd(II) inhibition and broadened the removal of Cd(II) to 150 mg/L. These EAB physiologically released variable amounts of extracellular polymeric substances with a compositional diversity in response to the changes of initial Cd(II) and circuital current whereas the activities of typical intracellular enzymes were more apparently altered by the initial Cd(II) than the circuital current. These results provide experimental validation of the presence, the metabolic plasticity and the physiological response of these EAB directed by the changes of initial Cd(II) and acetate concentrations in the single-chamber MECs, deepening our understanding of EAB physiological coping strategies in metallurgical microbial electro-ecological cycles.

Dibutyl phthalate weakens the role of electroactive biofilm as an efficient wastewater handler and related mechanism

Plasticizer plays an imperceptible role in interfering with the structure and function of wastewater biofilms, but the inherent influence mechanism still remains unknown. Here, the responses in electrochemical, structural, microbial properties of electroactive biofilm (EAB) to plasticizer (dibutyl phthalate, DBP) were comprehensively elucidated, especially for the property variation of extracellular polymeric substances (EPS). The biofilm-0 in DBP-absent environment contributed to 22.9% and 63.9% higher current, compared to those in 1 mg/L and 10 mg/L DBP environment (biofilm-1 and biofilm-10). Chronic exposure to high-concentration DBP significantly boosted the content and distribution width of polysaccharide in EPS, but the electron exchange capacity of EPS decreased 76.6% to 0.146 μmol e^-/mg EPS for biofilm-10. The bacteria were subjected to metabolic function loss, in terms of esterase activity and membrane integrity, by using flow cytometry. The DBP exposure also imposed selective pressure on enrich EPS-secretion-related bacteria, while the Geobacter species decreased from 71.2% (biofilm-0) to 55.8% (biofilm-10). Consequently, the DBP exposure suppressed the pollutant degradation rate, which provided new insights into the EAB role as a promising core for wastewater treatment in plasticizer-existing environments.

Heterogeneous Structure Regulated by Selection Pressure on Bacterial Adhesion Optimized the Viability Stratification Structure of Electroactive Biofilms

As the core of microbial fuel cells (MFCs), the components and structure of electroactive biofilms (EABs) are essential for MFC performance. Bacterial adhesion plays a vital role in shaping the structure of EABs, but the effect of bacterial adhesion under selection pressure on EABs has not been systematically studied. Here, the response of the composition, structure, and electrochemical performance of EABs to the selective adhesion pressure due to the selective coordination of Fe(III) and Co(II) with thiol and the different affinities for bacteria on hybrid electrodes (Fe₁Co, Fe₄Co, and Fe₁₀Co) were comprehensively investigated. Compared with carbon cloth (CC), the appropriate selective adhesion pressure of Fe₄Co activated the dead inner core of EABs and optimized their viability stratification structure. Both the total viability and the viability of the inner core layer in the Fe₄Co EAB (0.67, 0.70 ± 0.01) were higher than those of the CC (0.46, 0.54 ± 0.01), Fe₁Co (0.50, 0.48 ± 0.03), and Fe₁₀Co (0.51, 0.51 ± 0.03). Moreover, a higher proportion of proteins was detected in the Fe₄Co EAB, enhancing the redox activity of extracellular polymeric substances. Fe₄Co enriched Geobacter and stimulated microbial metabolism. Electrochemical analysis revealed that the Fe₄Co EAB was the most electroactive EAB, with a maximum power density of 2032.4 mW m^-2, which was 1.7, 1.3, and 1.1 times that of the CC (1202.6 mW m^-2), Fe₁Co (1610.3 mW m^-2), and Fe₁₀Co (1824.4 mW m^-2) EABs, respectively. Our findings confirmed that highly active EABs could be formed by imposing selection pressure on bacterial adhesion.

Responses of electroactive biofilms to chronic chlorine exposure: Insights from the composition and spatial structure of extracellular polymeric substances

Extensive amounts of chlorine disinfectants have been applied to wastewater system since the outbreak of coronavirus disease 2019 (COVID-19), which inevitably affects the pollutant degradation via interfering with electron transfer mediated by electroactive bacteria. Herein, the response of electroactive biofilm (EAB) to chronic chlorine exposure was investigated. Results showed the EAB formed without exposure (EAB-0) exhibited a 53% and 123% higher current output than that formed with 0.1 mg L-1 (EAB-0.1) and 0.5 mg L-1 (EAB-0.5) chlorine, respectively. The chronic chlorine exposure of EAB boosted the contents of extracellular polymeric substances (EPS) in EAB-0.1 and EAB-0.5 by over secretion of extracellular polysaccharides. The EAB-0.1 and EAB-0.5 also presented lower electron exchange capacities (EECs) of EPS, coincided with reduced relative abundance of Geobacter from 61% in EAB-0 to 52% in EAB-0.5. This study provided new insights into the application of engineered EAB for wastewater treatment in a disinfection environment.

Sessile methanogens dominated cathodic biofilm: Distribution and network in physiological transitions

A mature cathodic biofilm plays the key role in biocathode electron transfer. The physiological transitions of it were of great interests as the sessile and dispersed (planktonic) work in a balance while it is still lack of understanding. In this study, an improved sampling method was used for detecting sessile, detached, and dispersed microorganisms. The results indicated a certain number of methanogens (82.6%) and its associated phyla (60%-90%) are immobilized as sessile biofilm. The Tax4Fun predicted a lower abundance of mobility associated genes and a significant enrichment (t-test, P = 0.003) of c-di-GMP in sessile biofilm. Overall, the microbial interaction and motility were predicted as two factors to affect the physiological transitions of cathodic biofilm. This finding could shed a light on the investigation of cathodic biofilm in a dynamic transition rather than a static community, playing a pivotal role in understanding the relation between specific property of biofilm.

Long-Term Succession Shows Interspecies Competition of Geobacter in Exoelectrogenic Biofilms

Geobacter spp. are well-known exoelectrogenic microorganisms that often predominate acetate-fed biofilms in microbial fuel cells (MFCs) and other bioelectrochemical systems (BESs). By using an amplicon sequence variance analysis (at one nucleotide resolution), we observed a succession between two closely related species (98% similarity in 16S RNA), Geobacter sulfurreducens and Geobacter anodireducens, in the long-term studies (20 months) of MFC biofilms. Geobacter spp. predominated in the near-electrode portion of the biofilm, while the outer layer contained an abundance of aerobes, which may have helped to consume oxygen but reduced the relative abundance of Geobacter. Removal of the outer aerobes by norspermidine washing of biofilms revealed a transition from G. sulfurreducens to G. anodireducens. This succession was also found to occur rapidly in co-cultures in BES tests even in the absence of oxygen, suggesting that oxygen was not a critical factor. G. sulfurreducens likely dominated in early biofilms by its relatively larger cell size and production of extracellular polymeric substances (individual advantages), while G. anodireducens later predominated due to greater cell numbers (quantitative advantage). Our findings revealed the interspecies competition in the long-term evolution of Geobacter genus, providing microscopic insights into Geobacter's niche and competitiveness in complex electroactive microbial consortia.

Electrical selection for planktonic sludge microbial community function and assembly

Electrostimulated hydrolysis acidification (eHA) has been used as an efficient biological pre-treatment of refractory industrial wastewater. However, the effects of electrostimulation on the function and assembly of planktonic anaerobic sludge microbial communities are poorly understood. Using 16S rRNA gene and metagenomic sequencing, we investigated planktonic sludge microbial community structure, composition, function, assembly, and microbial interactions in response to electrostimulation. Compared with a conventional hydrolysis acidification (HA) reactor, the planktonic sludge microbial communities selected by electrostimulation promoted biotransformation of the azo dye Alizarin Yellow R. The taxonomic and functional structure and composition were significantly shifted upon electrostimulation with azo dyes degraders (e.g. Acinetobacter and Dechloromonas) and electroactive bacteria (e.g. Pseudomonas) being enriched. More microbial interactions between fermenters and decolorizing and electroactive bacteria, as well as fewer interactions between different fermenters evolved in the eHA microbial communities. Moreover, the decolorizing bacteria were linked to the higher abundance of genes encoding for azo- and nitro-reductases and redox mediator (e.g. ubiquinone) biosynthesis involved in the transformation of azo dye. Microbial community assembly was more driven by deterministic processes upon electrostimulation. This study offers new insights into the effects of electrostimulation on planktonic sludge microbial community function and assembly, and provides a promising strategy for the manipulation of anaerobic sludge microbiomes in HA engineering systems.

External resistance acclimation regulates bio-anode: new perspective from biofilm structure and its correlation with anode performance

External resistance is important for the anode and cell performance. However, little attentions were paid on the effect of external resistance on the variation of biofilm structure. Here, we used external resistance ranged from 4000 to 500 Ω for anodic acclimation to investigate the correlation between anode performance and biofilm structure. With the reduce of external resistance, the maximum current density of anode increased from 1.0 to 3.4 A/m², which was resulted from a comprehensive effect of reduced charge transfer resistance and increased diffusion resistance. Biological analysis showed that with the reduce of external resistance, biomass and extracellular polymeric substances content increased by 109 and 286%, cell viability increased by 22.7%, which contributed to the reduced charge transfer resistance. But the porosity of anodic biofilm decreased by 27.8%, which led to an increased diffusion resistance of H⁺. This work provided a clear correlation between the electrochemical performance and biofilm structure.

A highly sensitive bioelectrochemical toxicity sensor and its evaluation using immediate current attenuation

Electroactive biofilm (EAB) sensor had shown great potential in the field of early warning of toxicants in water because of the low-cost and broad-spectrum. However, the traditional calculation of sensitivity strongly relied on the time and concentration gradient which weakened time-efficiency of the sensor. Moreover, the sensitivity could be further improved to respond trace concentrations. Here EAB sensors with different substrate concentrations were formed to respond different concentrations formaldehyde ranging from 1 ppm to 50 ppm and immediate current attenuation (ICA) was induced to evaluate the sensitivity. The ICA (~70 s) exhibited a shorter time than that calculated by calculable sensitivity (CS) and current attenuation (CA), which not only achieved the response of trace concentration but also improved the time-efficiency of the sensor. The EAB formed with 0.1 g/L acetate (EAB-0.1) had a 380% higher sensitivity than that formed with 1.0 g/L acetate (EAB-1.0), leading to a significant electrochemical toxicity response to 1 ppm of formaldehyde. The results of electrochemical response coefficient confirmed that EAB-0.1 was 1.5-6.3 times of that formed with acetate from 0.2 to 1.0 g/L, which was related with microbial community and component of EAB as described in our previous study. Our findings demonstrated that calculation of sensitivity could be optimized to reflect time-efficiency and EAB with limit acetate could be applied in trace toxicant detection.

A modelling study of the spatially heterogeneous mutualism between electroactive biofilm and planktonic bacteria

Microbial cooperation widely exists in anaerobic reactors degrading complex pollutants, conventionally studied separately inside the biofilm or the planktonic community. Recent experiments discovered the mutualism between the planktonic bacteria and electroactive biofilm treating propionate, an end-product usually accumulated in anaerobic digesters. Here, a one-dimensional multispecies model found the preference on acetate-based pathway over the hydrogen-based in such community, evidenced by the fact that acetate-originated current takes 66% of the total value and acetate-consuming anode-respiring bacteria takes over 80% of the biofilm. Acetate-based anodic respiration most apparently influences biofilm function while propionate fermentation is the dominant planktonic bio-reaction. Additionally, initial planktonic propionate level shows the ability of coordinating the balance between these two extracellular electron transfer pathways. Increasing the propionate concentration from 2 to 50 mM would increase the steady hydrogen-originated current by 210% but decrease the acetate-originated by 26%, suggesting a vital influence of the planktonic microbial process to the metabolic balance in biofilm. Best strategy to promote the biofilm activity is to increase the biomass density and biofilm conductivity simultaneously, which would increase the current density by 875% without thickening the biofilm thickness or prolonging the growth apparently.

Light exposure interferes with electroactive biofilm enrichment and reduces extracellular electron transfer efficiency

Light plays a vital role in shaping the structure of natural biofilms, but the effect of light on electroactive biofilm (EAB) has not been systematically studied. Herein, the influence of light on the formation of EAB was investigated. The EAB grown in darkness was more electroactive (EAB-0) with a peak current of ∼4.5 A/m², which was 196 and 5556 times higher than EABs formed under light intensities of 600 (EAB-600) and 1200 lux (EAB-1200). A thin EAB (30 μm) with spherical pink aggregates was obtained after 13 days in the darkness, comparing to a dense and flat biofilm grown under light conditions. Although the biomass in EAB-1200 (38.5 ± 1.6 mg/L) was 3 times larger than that in EAB-0 (11.4 ± 1.8 mg/L), the degradation of substrate was not sufficient. EAB-0 contained 85% Geobacter species, while the Rhodopseudomonas species made up 66% and 75% of EAB-600 and EAB-1200, respectively. The polysaccharides produced by EAB-1200 was 4801 ± 253 mg/m², which were 2.3 times higher than 2073 ± 160 mg/m² of EAB-0, resulting in lower electro-conductivity of the extracellular polymeric substances (EPS) under light conditions. Our findings confirmed that the light exposure affected EAB performance by altering the microbial components, electron transfer capacity, and biofilm morphology, which can be used in predictions of the formation and properties of engineered EAB in outdoor environments.

Microfluidic Microbial Bioelectrochemical Systems: An Integrated Investigation Platform for a More Fundamental Understanding of Electroactive Bacterial Biofilms

It is the ambition of many researchers to finally be able to close in on the fundamental, coupled phenomena that occur during the formation and expression of electrocatalytic activity in electroactive biofilms. It is because of this desire to understand that bioelectrochemical systems (BESs) have been miniaturized into microBES by taking advantage of the worldwide development of microfluidics. Microfluidics tools applied to bioelectrochemistry permit even more fundamental studies of interactions and coupled phenomena occurring at the microscale, thanks, in particular, to the concomitant combination of electroanalysis, spectroscopic analytical techniques and real-time microscopy that is now possible. The analytical microsystem is therefore much better suited to the monitoring, not only of electroactive biofilm formation but also of the expression and disentangling of extracellular electron transfer (EET) catalytic mechanisms. This article reviews the details of the configurations of microfluidic BESs designed for selected objectives and their microfabrication techniques. Because the aim is to manipulate microvolumes and due to the high modularity of the experimental systems, the interfacial conditions between electrodes and electrolytes are perfectly controlled in terms of physicochemistry (pH, nutrients, chemical effectors, etc.) and hydrodynamics (shear, material transport, etc.). Most of the theoretical advances have been obtained thanks to work carried out using models of electroactive bacteria monocultures, mainly to simplify biological investigation systems. However, a huge virgin field of investigation still remains to be explored by taking advantage of the capacities of microfluidic BESs regarding the complexity and interactions of mixed electroactive biofilms.

Intermittent electro field regulated mutualistic interspecies electron transfer away from the electrodes for bioenergy recovery from wastewater

Lately, extracellular electron transfer (EET) is widely disclosed on the surface of the bioelectrodes, and conductive (bio)carriers involved in anaerobic biodegradation/biosynthesis. By electrostimulation, microbial consortia colonize the electrodes and accelerate substrate (waste/wastewater) metabolization on the bioanode or biosynthesize value-added products (methane, acetate, etc.) on the biocathode. However, the connections and contributions of planktonic microbial communities have not been effectually understood. Herein, electromethanogenesis were comprehensively investigated in response to different driving-force modes: intermittent electric field applied by manual on-off or natural solar power and continuous electrical field. Intermittent modes implied preferable electron transfer efficiency, higher methane yield and energy recovery efficiencies from wastewater by the microbes in the bulk solutions. Microbial community analysis revealed that less electroactive microorganisms and acetotrophic methanogens in the bulk solutions were accommodated under the intermittent modes than the continuous electrical field, whereas more fermentative bacteria and hydrogenotrophic methanogens evolved in the intermittent driving modes, implying that the interspecies electron transfer both on and away from the electrodes were favorably regulated. Redundancy and network analysis proved that more complicated ecological interactions were shown in the bulk solutions with the periodic on/off of electrical field. These results hinted that the electrostimulation effectively regulated EET bacteria, even in the bulk solutions, while more efficient electron flow to methane through interspecies electron transfer was developed during the intermittent driving regulation.

Towards the practical application of bioelectrochemical anaerobic digestion (BEAD): Insights into electrode materials, reactor configurations, and process designs

Anaerobic digestion (AD) is one of the most widely adopted bioenergy recovery technologies globally. Despite the wide adoption, AD has been challenged by the unstable performances caused by imbalanced substrate and/or electron availability among different reaction steps. Bioelectrochemical anaerobic digestion (BEAD) is a promising concept that has demonstrated potential for balancing the electron transfer rates and enhancing the methane yield in AD during shocks. While great progress has been made, a wide range of, and sometimes inconsistent engineering and technical strategies were attempted to improve BEAD. To consolidate past efforts and guide future development, a comprehensive review of the fundamental bioprocesses in BEAD is provided herein, followed by a critical evaluation of the engineering and technical optimizations attempted thus far. Further, a few novel directions and strategies that can enhance the performance and practicality of BEAD are proposed for future research to consider. This review and outlook aim to provide a fundamental understanding of BEAD and inspire new research ideas in AD and BEAD in a mechanism-informed fashion.

Activation of Protein Expression in Electroactive Biofilms

Microbes that form biofilms on electrodes and generate electrical current responses could be integrated into devices to perform sensing, conduct signals, or act as living microprocessors. A challenge in working with these species is the ability to visualize biofilm formation and protein expression in real-time while also measuring current, which is not possible with typical bio-electrochemical reactors. Here, we present a three-dimensional-printed flow cell for simultaneous electrochemistry and fluorescence imaging. Current-producing biofilms of Marinobacter atlanticus constitutively expressing green fluorescent protein were grown on the flow cell working electrode. Increasing current corresponded with increasing surface coverage and was comparable to biofilms grown in typical stirred-batch reactors. An isopropyl β-d-1-thiogalactopyranoside (IPTG) inducible system driving yellow fluorescent protein was used to assess the spatiotemporal activation of protein expression within the biofilm at different stages of growth and induction dynamics. The response time ranged from 30 min to 5 h, depending on the conditions. These data demonstrate that the electrochemical flow cell can evaluate the performance of an electrically active environmental bacterium under conditions relevant for development as a living electronic sensor.

Biofilm's morphology design for high sensitivity of bioelectrochemical sensor: An experimental and modeling study

High sensitivity is essential for the application of bioelectrochemical system-based sensor (BES sensor) in water quality early-warning, where the electroactive biofilm is of vital importance as it delivers a responsive electric signal to toxic substances. This study artificially designed the morphology of a naturally formed biofilm by employing a serrated knife to scrape the biofilm and thus obtained a reduced thickness and roughness. Then it was further cut by half to halve the biomass. BES sensors equipped with control and processed biofilms were operated under constant anode potential (CAP) and tested at different Cu(II) concentrations to study their sensitivities. Results revealed that the scraped biofilms delivered much increased sensitivity towards Cu(II) shock, which was attributed to a reduced thickness as illustrated by macroscopic and microscopic morphology analysis. Another finding was that biomass per unit interfacial area, rather than the biomass, also affected the sensitivity. To further describe how the inner biofilm responded the toxicity after morphology design, a one-dimension mass transfer model was developed to simulate the mass transfer of Cu(II) in the biofilms with different thicknesses. The relative threshold value of inlet Cu(II) concentration was employed to fit the modeling and experimental results, indicating that decreased biofilm thickness was beneficial for improving the sensitivity.

Electron Flow Shifts from Anode Respiration to Nitrate Reduction During Electroactive Biofilm Thickening

As electrons generated through substrate oxidation compete with electrodes, dissimilatory nitrate reduction to ammonium (DNRA), denitrification in bioelectrochemical systems in the presence of nitrate, and nitrate reduction through an electroactive biofilm (EAB) are unpredictable. We find that pathways of nitrate reduction are related to EAB thickness and that 76 ± 2 μm is the critical thickness of a biofilm at which both the inner and outer layers simultaneously include DNRA, leading to a maximum level of DNRA efficiency of 42%. Fractions of electrons flowing during nitrate reduction are relatively stable, but their distributions between DNRA and denitrification vary with biofilm thickness. Electrons prefer denitrification in an EAB that is 66 ± 2 μm, while DNRA reversely surpasses denitrification when the thickness increases in the range of 76 ± 2 to 210 ± 2 μm. Biofilm thickening enhances the DNRA of all biofilms close to solution, where nirK remains constant and nrfA is significantly upregulated. However, nrfA is downregulated in layers close to the electrode when the biofilm is thicker than 76 ± 2 μm. These findings reveal the spatially heterogeneous reduction of nitrate in thick EABs, highlighting the importance of biofilm thickness to the regulation of end products of nitrate reduction.

The new insight about electrode interface behaviour via in situ ultrasound three-dimensional representation monitoring based on a bio-electrochemical system

Behaviour of the electrode interface is a determining factor that affects the performance of a bio-electrochemical system (BES). Examples include the formation of an electroactive biofilm, electrode degradation and renewal. However, underlying mechanisms are unclear, and traditional approaches make it difficult to achieve in situ monitoring. In this study, a novel technology using ultrasound three-dimensional representation (UTDR) was used to track in situ electrode interface behaviour based on the correspondence between acoustic and electrical signals. A series of wavelet analyses showed that the formation of an electroactive biofilm is a lengthy process with multiple physiological steps, and biofilm thickness increased by approximately 600 μm after 40 days of operation. At the same time, directional migration of Ca²⁺, Mg²⁺ confirmed acceleration of the salting out on the cathode, which forms a compacted structure with the biological layer. Furthermore, UTDR combined with electrochemical methods allowed for comprehensive evaluation of AC impact, and indicated that AC (1 Hz, 20 V) could effectively desquamate the contaminating solids and restore power density to 93.4% of initial. These results show that UTDR is a sensitive and effective method for revealing microscopic changes on the electrode surface, which gives it potential wide applicability to interfacial processes.

Acetate limitation selects Geobacter from mixed inoculum and reduces polysaccharide in electroactive biofilm

Bioelectrochemical systems (BESs) are widely investigated as a promising technology to recover bioenergy or synthesize value-added products from wastewaters. The performance of BES depends on the activity of electroactive biofilm (EAB). As the core of BES, it is still unclear how the EAB is formed from mixed inoculum, and how exoelectrogens compete with non-exoelectrogens. Here we confirmed that microbial community composition and the morphology of EAB on the electrode including the thickness and porosity of the biofilm are critical for the performance of BES, and these properties can be simply controlled by the substrate concentration during EAB formation. The EAB formed with 0.1 g/L of acetate (EAB-0.1) exhibited a 90% higher current density than that formed with 1.0 g/L acetate (EAB-1.0). EAB-0.1 had a 50% higher electroactivity per biomass and a 20% thinner thickness than EAB-1.0, which was partly due to the 54% decrease of insulative polysaccharide in biofilm. Limited acetate also imposed a selective pressure to enrich Geobacter up to 88% compared to 72% when acetate was abundant. Our findings demonstrate that a highly active EAB can be formed by limiting substrate concentration, providing a broader understanding of the EAB formation process, the ecology of interspecies competitions and potential applications for bioenergy recovery and trace toxicant detection in the future.

Electrical tension-triggered conversion of anaerobic to aerobic respiration of Shewanella putrefaciens CN32 cells while promoting biofilm growth in microbial fuel cells

A global gene expression analysis of Shewanella putrefaciens CN32 cells nearby a nanostructured microbial anode reveals an electrical tension-triggered conversion of anaerobic respiration to aerobic respiration with increased excretion of flavin electron shuttles and cytochrome C proteins, which sheds light on the role of electric tension in cell organisms.

The metolachlor degradation kinetics and bacterial community evolution in the soil bioelectrochemical remediation

Herbicide-polluted soils have posed a threat to the crop growth and agro-product quality and safety. Even worse, the low-content of residue is still appreciable for a long time in subsurface soils. The soil bioelectrochemical remediation system (BERS) provides an inexhaustible electron acceptor to cause in situ indigenous microorganisms to generate biocurrent and accelerate the removal of metolachlor (ML). As a result of carbon fiber amendment, the highest current density (637 ± 19 mA/m²) to date has been generated in a soil BERS. The ML half-life and complete removal time decreased from 21 to 3 d and from 245 to 109 d, respectively. Importantly, the soil BERS was verified to be an effective treatment method for low-polluted sediments/soils, whether by ML or by its degradates. The quantitative degradates of ML showed that the first step was dechlorination based on the bioelectrochemical degradation pathway. The biocurrent selectively enriched special species, e.g., Geobacter and Thermincola for bioelectricity generation and Ralstonia, Phyllobacterium and Stenotrophomonas for degradation in soils. Meanwhile, Flavisolibacter and Gemmatimonas occupied the core niche in strengthening interspecific relationships by the biocurrent. This study firstly revealed the explicit abundance of Geobacter in agricultural soils and laid a foundation for the function design of mixed bacteria in the sediment/soil BERS.

Unignorable toxicity of formaldehyde on electroactive bacteria in bioelectrochemical systems

Formaldehyde poses significant threats to the ecosystem and is widely used as a toxicity indicator to obtain electrical signal feedback in electroactive biofilm (EAB)-based sensors. Although many optimizations have been adopted to improve the performance of EAB to formaldehyde, nearly no studies have discussed the toxicity of formaldehyde to EAB. Here, EABs were acclimated with a stable current density (8.9 ± 0.2 A/m²) and then injected with formaldehyde. The current density decreased by 27% and 98% after the injection of 1 and 10 ppm formaldehyde, respectively, compared with that in the control. The ecotoxicity of formaldehyde caused the irreversible loss of current with 3% (1 ppm) and 81% (10 ppm). Confocal laser scanning microscopy and scanning electron microscopy results showed that the redox activity was inhibited by formaldehyde, and the number of dead/broken cells increased from 2% to 40% (1 ppm) and 91% (10 ppm). The contents of the total protein and extracellular polymer substances decreased by more than 28% (1 ppm) and 75% (10 ppm) because of the cleavage reaction caused by formaldehyde. Bacterial community analysis showed that the proportion of Geobacter decreased from 81% to 53% (1 ppm) and 24% (10 ppm). As a result, the current production was significantly impaired, and the irreversible loss increased. Toxicological analysis demonstrated that formaldehyde disturbed the physiological indices of cells, thereby inducing apoptosis. These findings fill the gap of ecotoxicology of toxicants to EAB in a bioelectrochemical system.

Nutrient conversion and recovery from wastewater using electroactive bacteria

Wastewater is widely recognized as a sink of active nitrogen and phosphorus, and the recovery of both nutrients as fertilizers is widely studied in recent years. Electroactive bacteria increasingly attract attentions in this area because they are able to produce an electric field in microbial electrochemical systems to concentrate ammonium and phosphate for recovery. Importantly, these unique bacteria are able to convert nitrate and nitrite directly to ammonium, maximizing the active nitrogen species capable of recovery. Ferric ions produced by electroactive bacteria can be precipitated with phosphate to recover as vivianite in neutral wastewaters. All these processes employed electroactive bacteria as both nitrate and iron reducer and bioelectric field generator. The mechanism as well as technologies are summarized, and the challenges to further improve their performance are discussed.

Potassium channel blocker inhibits the formation and electroactivity of Geobacter biofilm

Bacteria in biofilms are able to utilize potassium ion channel-mediated electrical signaling to achieve cell-cell communication. However, it remains unclear whether these signals play a role in Geobacter sp. when surrounded by an intense electric field. This study used a potassium channel blocker (tetraethylammonium, TEA) that interfered with the release of K⁺ but not bacterial growth to demonstrate that potassium ion channel-mediated electrical signaling affected the formation and electroactivity of Geobacter sulfurreducens. The results showed that 5 mM TEA slowed the formation of Geobacter sulfurreducens biofilm, and the current density was ~50% lower than in the control. The electrochemical analyses showed that the electroactivity of the biofilms with TEA addition was inferior. In particular, the micrometer- scale biofilm with TEA exhibited fewer high current peaks, and the species of outermost groups that participated in the electron transfer in Geobacter sulfurreducens biofilms was different from the control. This work provides initial evidence to reveal the role of potassium channels in Geobacter sulfurreducens electroactive biofilms.

Direct current triggering enhanced anaerobic treatment of acetyl pyrimidine-containing wastewater in up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system

In this study, the novel up-flow anaerobic sludge blanket coupled with bioelectrocatalytic system (UASB-BEC) was developed with the attempt to enhance treatment of acetyl pyrimidine-containing wastewater. The results revealed that higher current applied had a positive effect on acetyl pyrimidine (AP) degradation but a negative impact could be followed by the overhigh current (>1.26 A m^-3). Removal efficiencies of AP and total organic carbon (TOC) were as high as 96.3 ± 2.6% and 92.9 ± 3.2% while methane production reached up to 0.70 ± 0.03 NL-CH₄ L^-1-reactor d^-1 at applied current of 1.26 A m^-3, which were significantly higher those in control system. Moreover, high-throughput 16S rRNA gene pyrosequencing further indicated that Desulfovibrio and Methanimicrococcus species were specially enriched in suspended sludge and cathodic biofilm with current involvement. It could be reasonably speculated that enrichment of Desulfovibrio and Methanimicrococcus species could promote biotransformation of AP and final H₂-depended methylotrophic methanogenesis. This study could shed light on better understanding of AP transformation in bioelectrocatalytic system and provide a valuable reference to practical application of anaerobic AP-containing wastewater treatment.

Shear Stress Affects Biofilm Structure and Consequently Current Generation of Bioanode in Microbial Electrochemical Systems (MESs)

Shear stress is an important factor that affects the formation and structure of anode biofilms, which are strongly related to the extracellular electron transfer phenomena and bioelectric performance of bioanodes. Here, we show that using nitrogen sparging to induce shear stress during anode biofilm formation increases the linear sweep voltammetry peak current density of the mature anode biofilm from 2.37 ± 0.15 to 4.05 ± 0.25 A/m². Electrochemical impedance spectroscopy results revealed that the shear-stress-enriched anode biofilm had a low charge transfer resistance of 46.34 Ω compared to that of the unperturbed enriched anode biofilm (72.2 Ω). Confocal laser scanning microscopy observations showed that the shear-stress-enriched biofilms were entirely viable, whereas the unperturbed enriched anode biofilm consisted of a live outer layer covering a dead inner-core layer. Based on biomass and community analyses, the shear-stress-enriched biofilm had four times the biofilm density (136.0 vs. 27.50 μg DNA/cm³) and twice the relative abundance of Geobacteraceae (over 80 vs. 40%) in comparison with those of the unperturbed enriched anode biofilm. These results show that applying high shear stress during anode biofilm enrichment can result in an entirely viable and dense biofilm with a high relative abundance of exoelectrogens and, consequently, better performance.

Continuous shear stress alters metabolism, mass-transport, and growth in electroactive biofilms independent of surface substrate transport

Electroactive bacteria such as Geobacter sulfurreducens and Shewanella onedensis produce electrical current during their respiration; this has been exploited in bioelectrochemical systems. These bacteria form thicker biofilms and stay more active than soluble-respiring bacteria biofilms because their electron acceptor is always accessible. In bioelectrochemical systems such as microbial fuel cells, corrosion-resistant metals uptake current from the bacteria, producing power. While beneficial for engineering applications, collecting current using corrosion resistant metals induces pH stress in the biofilm, unlike the naturally occurring process where a reduced metal combines with protons released during respiration. To reduce pH stress, some bioelectrochemical systems use forced convection to enhance mass transport of both nutrients and byproducts; however, biofilms’ small pore size limits convective transport, thus, reducing pH stress in these systems remains a challenge. Understanding how convection is necessary but not sufficient for maintaining biofilm health requires decoupling mass transport from momentum transport (i.e. fluidic shear stress). In this study we use a rotating disc electrode to emulate a practical bioelectrochemical system, while decoupling mass transport from shear stress. This is the first study to isolate the metabolic and structural changes in electroactive biofilms due to shear stress. We find that increased shear stress reduces biofilm development time while increasing its metabolic rate. Furthermore, we find biofilm health is negatively affected by higher metabolic rates over long-term growth due to the biofilm’s memory of the fluid flow conditions during the initial biofilm development phases. These results not only provide guidelines for improving performance of bioelectrochemical systems, but also reveal features of biofilm behavior. Results of this study suggest that optimized reactors may initiate operation at high shear to decrease development time before decreasing shear for steady-state operation. Furthermore, this biofilm memory discovered will help explain the presence of channels within biofilms observed in other studies.