Rightsizing Nanochannels in Reduced Graphene Oxide Membranes by Solvating for Dye Desalination

Low Fouling Polyelectrolyte Layer-by-Layer Self-Assembled Membrane for High Performance Dye/Salt Fractionation: Sequence Effect of Self-Assembly

Layer-by-layer (LbL) self-assembly of oppositely charged polyelectrolytes (PEs) is usually performed on a conventional ultrafiltration base substrate (negative zeta potential) by depositing a cationic PE as a first layer. Herein, we report the facile and fast formation of high performance molecular selective membrane by the nonelectrostatic adsorption of anionic PE on the polyvinylidene fluoride (PVDF, zeta potential -17 mV) substrate followed by the electrostatic LbL assembly. Loose nanofiltration membranes have been prepared via both concentration-polarization (CP-LbL, under applied pressure) driven and conventional (C-LbL, dipping) LbL self-assembly. When the first layer is poly(styrene sodium) sulfonic acid, the LbL assembled membrane contains free -SO3- groups and exhibits higher rejection of Na2SO4 and lower rejection of MgCl2. The reversal of salt rejection occurs when the first layer is quaternized polyvinyl imidazole (PVIm-Me). The membrane (five layers) prepared by first depositing PStSO3Na shows higher rejection of several dyes (97.9 to >99.9%), higher NaCl to dye separation factor (52-1800), and higher dye antifouling performance as compared to the membrane prepared by first depositing PVIm-Me (97.5-99.5% dye rejection, separation factor ∼40-200). However, the C-LbL membrane requires a longer time of self-assembly or higher PE concentration to reach a performance close to the CP-LbL membranes. The membranes exhibit excellent pressure, pH (3-12), and salt (60 g L-1) stability. This work provides an insight for the construction of low fouling and high-performance membranes for the fractionation of dye and salt based on the LbL self-assembly sequence.

From Sheep Track to Motorway: Supramolecular-Mediated 2D Nanofluidic Channels for Ultrafast Water Transport

Atomic thick 2D materials hold great potential as building blocks to construct highly permeable membranes, yet the permeability of laminar 2D material membranes is still limited by their irregularity sheep track-like interlayer channels. Herein, a supramolecular-mediated strategy to induce the regular assembly of high-throughput 2D nanofluidic channels based on host-guest interactions is proposed. Inspired by the characteristics of motorways, supramolecular-mediated ultrathin 2D membranes with broad and continuous regular water transport channels are successfully constructed using graphene oxide (GO) as an example. The prepared membrane achieves an ultrahigh water permeability (369.94 LMH bar-1) more than six times higher than that of the original membranes while maintaining dye rejection above 98.5%, which outperforms the reported 2D membranes. Characterization and simulation results show that the introduction of hyaluronate-grafted β-cyclodextrin not only expands the interlayer channels of GO membranes but also enables the membranes to operate stably under harsh conditions with the help of host-guest interactions. This universal supramolecular assembly strategy provides new opportunities for the preparation of 2D membranes with high separation performance and reliable and stable nanofluidic channels.

Role of tea polyphenols in enhancing the performance, sustainability, and catalytic cleaning capability of membrane separation for water-soluble pollutant removal

Tea polyphenols (TPs), like green tea polyphenol (GTP) and black tea polyphenol (BTP), with phenolic hydroxyl structures, form coordination and hydrogen bonds, making them effective for bridging inorganic catalysts and membranes. Here, TPs were employed as interface agents for the preparation of TPs-modified needle-clustered NiCo-layered double hydroxide/graphene oxide membranes (NiCo-LDH-TPs/GO). The incorporation of porous guest material, NiCo-LDH-TPs, facilitated water channel expansion, enhancing membrane permeability and resulting in the development of high-performance, sustainable catalytic cleaning membranes. The introduction of TPs through coordination weakened the surface electronegativity of NiCo-LDH, promoting a uniform mixed dispersion with GO and facilitating membrane self-assembly. NiCo-LDH-GTP/GO-5 and NiCo-LDH-BTP/GO-5 membranes demonstrated permeances of 85.98 and 90.76 L m-2 h-1 bar-1, respectively, with rejections of 98.73% and 99.54% for methylene blue (MB). Notably, the NiCo-LDH-BTP/GO-5 membrane maintained a high rejection of 97.11% even after 18 cycles in the catalytic cleaning process. Furthermore, the modification of GTP and BTP enhanced MB degradation through PMS activation, resulting in a 0.33% and 0.35% increase in the reaction rate constants of NiCo-LDH, respectively, while reducing metal ion spillover. These findings highlighted the potential of TPs in enhancing the efficiency and sustainability of catalytic cleaning GO membranes for water purification and separation processes.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Interfacial Polymerization of Highly Active Thiolated Cyclodextrin for the Fabrication of a Loose Nanofiltration Membrane with a Chlorine-Resistant Poly(thioester) Linkage

Cyclodextrins have been frequently used to fabricate membranes via interfacial polymerization (IP). However, the relatively low reactivity of pristine cyclodextrins often induces a lower cross-linking density and unsatisfactory separation performance. In this work, to introduce a highly active thiolated β-cyclodextrin (CD-SH) monomer into IP progress, we constructed a dense and porous poly(thioester) linkage on a commercial membrane surface with loose nanofiltration by IP of CD-SH and trimesoyl trichloride (TMC) as the monomer in an aqueous phase and organic phase separately for the first time. Furthermore, the reactivity of CD-SH has been fully demonstrated by the two-phase IP aiming at unmodified β-CD, a CD-SH/TMC freestanding membrane with a thicker interfacial layer and a smoother surface, and a PAN/CD-SH membrane with a narrow porous distribution. The composite membrane possessed superior separation performance for a high rejection (83.1-99.6%) of different anionic dyes and a low rejection (<20%) of salts, as well as a high-efficiency sieving ability of dye/dye and dye/salt mixtures. The membrane with a poly(thioester) selective layer could steadily operate in a long-term filtration test and exhibit great stability, chloride-resistance performance, and recyclability.

High-Flux lamellar MoSe2 membranes for efficient dye/salt separation

Membrane-based technology is emerging as an efficient technique for wastewater treatment in recent years. Membranes made up of two-dimensional materials provide high selectivity and water flux compared to conventional polymeric membranes. Herein, we report the synthesis and use of MoSe₂ membrane for dye and drug separation in wastewater, mainly from textile and pharmaceutical industries. The as-prepared MoSe₂ membrane shows ∼ 100% rejection for organic dyes and ciprofloxacin drug with a water flux reaching up to ∼ 900 Lm^-2h^-1bar^-1. Further, the MoSe₂ membrane shows lower NaCl rejection of ∼ 1.9% for the dye/salt mixture. The interlayer spacing in the MoSe₂ membrane allows the water molecules and ions from the salt to pass through freely but restricts the movement of large contaminants. The membrane is stable against the bovine albumin serum fouling with a flux recovery rate of 96%. It also shows good performance even in harsh environments (pH 3-10). To the best of our knowledge, the MoSe₂ membranes were fabricated for the first time for wastewater treatment application. The dye/salt separation performance of the MoSe₂ membrane is significantly better than several other membranes. This work highlights the promising potential for using two-dimensional materials for textile and pharmaceutical wastewater treatment.

Electrochemical Opening of Impermeable Nanochannels in Laminar Graphene Membranes for Ultrafast Nanofiltration

Reduced graphene oxide (rGO) could be theoretically used to construct highly permeable laminar membranes with nearly frictionless nanochannels for water treatment. However, their pristine (sp² C-C) regions usually restack into impermeable channels as a result of van der Waals interactions, resulting in a much low permeance. In this study, we demonstrate that the restacked regions could be electrochemically expanded to form ultrafast water transport nanochannels by providing a low positive potential (e.g., +1.00 V vs SCE) to the rGO membrane. Experimental investigations indicate that the structural expansion is attributed to the intercalation of water molecules into the restacked regions, driven by hydrogen bond interactions between water molecules and hydroxyl groups that are electrochemically produced on edges of rGO nanosheets. The structural expansion could be promoted by weakening the graphene-OH^- interactions through intermittent application of the potential. As a result of more ultrafast water transport nanochannels available, the electrochemically treated rGO membranes could have a permeance 2 orders of magnitude higher than that of the pristine one and ∼3 times higher than that of graphene oxide membranes. Because of their smaller average pore size, the rGO membranes also have a higher ionic/molecular rejection performance than graphene oxide membranes.

Recent Advances on the Fabrication of Antifouling Phase-Inversion Membranes by Physical Blending Modification Method

Membrane technology is an essential tool for water treatment and biomedical applications. Despite their extensive use in these fields, polymeric-based membranes still face several challenges, including instability, low mechanical strength, and propensity to fouling. The latter point has attracted the attention of numerous teams worldwide developing antifouling materials for membranes and interfaces. A convenient method to prepare antifouling membranes is via physical blending (or simply blending), which is a one-step method that consists of mixing the main matrix polymer and the antifouling material prior to casting and film formation by a phase inversion process. This review focuses on the recent development (past 10 years) of antifouling membranes via this method and uses different phase-inversion processes including liquid-induced phase separation, vapor induced phase separation, and thermally induced phase separation. Antifouling materials used in these recent studies including polymers, metals, ceramics, and carbon-based and porous nanomaterials are also surveyed. Furthermore, the assessment of antifouling properties and performances are extensively summarized. Finally, we conclude this review with a list of technical and scientific challenges that still need to be overcome to improve the functional properties and widen the range of applications of antifouling membranes prepared by blending modification.

Graphene Synthesis Techniques and Environmental Applications

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp² hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO₂ conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

Positively charged membranes for dye/salt separation based on a crossover combination of Mannich reaction and prebiotic chemistry

With the advent of increasingly loose nanofiltration membranes for dye desalination, synthesis methods based on interfacial polymerization and bio-inspired materials such as polydopamine (pDA) have been investigated. However, the long polymerization time of pDA greatly limits the synthesis and application of fast dye/salt separation membranes. In this work, prebiotic chemistry-inspired aminomalononitrile (AMN) was used as a binder to co-deposit the Mannich reaction of tetrakis(hydroxymethyl)phosphonium chloride (THPC) and polyethyleneimine (PEI) to form the positively charged selective layer rapidly. The optimum membrane had a water permeance of 30.7 LMH bar^-1 and a rejection of positively charged Victoria blue B (VBB, 200 ppm) and Na₂SO₄ (1 g/L) of 99.5 % and 9.9 %, respectively. Moreover, the results of a practical application test showed that it had excellent separation performance towards various positively charged dyes and salts. In addition, the actual application test results show that the membrane has good long-term stability during application. In terms of antifouling and antibacterial, the membrane has excellent antibacterial and antifouling properties., Further antibacterial tests were carried out, and the inactivation effect of the membrane on E. coli was also confirmed. The preparation method proposed in this work provides technical support for developing new dye/salt separation membranes.

Absolute film separation of dyes/salts and emulsions with a superhigh water permeance through graded nanofluidic channels

The development of multifunctional films with a high permeability has been of great concern for effective separation of complex aqueous contaminants, especially in the face of zero or near-zero release regulations. Inspired by the natural structure of sandy soils, polydopamine-wrapped/connected polypyrrole sub-micron spheres (PPSM) were closely packed onto a polypyrrole-coated bacterial cellulose (PBC) support, by which a new two-layered PBC/PPSM composite film formed with graded nanofluidic channels. Interestingly, after being soaked in complex water environments of ethanol, acids, bases, heat, cold and high salinity, or else bended/folded for more than 10 times, the structure and performance of this film still stayed the same, validating its high structural stability and flexibility. Even in a high salinity environment over seawater, this PBC/PPSM film exhibits a dye-separation capacity of almost 100% with a surprisingly superhigh water permeance over one thousand L h^-1 m^-2 bar^-1, one or two magnitudes higher than that of the related films reported in the literature. Meanwhile, the ability for effective oil-water-separation was also validated. Besides the superhydrophilicity and underwater superoleophobicity, the synapse-like-structure-induced graded nanofluidic channels are also proposed to play a key role for rendering such an outstandingly comprehensive performance of the film by greatly overcoming fluid resistance and reducing permeation viscosity.

Antibacterial polyvinyl alcohol nanofiltration membrane incorporated with Cu(OH)2 nanowires for dye/salt wastewater treatment

In many important industries, such as the textile printing industry, a large amount of dye/salt wastewater is often discharged, which can destroy the ecological environment of the water body. Membrane technology has a great potential in the treatment of environmental problems caused by dye/salt wastewater. Polyvinyl alcohol (PVA) nanofiltration (NF) membrane has a bright future in dye/salt wastewater treatment, however, works on this are rare. Herein, antibacterial PVA NF membrane incorporated with Cu(OH)₂ nanowires for the dye/salt wastewater treatment is reported. The membrane was prepared via coating the solutions containing PVA, glutaraldehyde and Cu(OH)₂ nanowires on the polyethersulfone ultrafiltration membrane. Cu(OH)₂ nanowires has a diameter of 60 nm and was successfully introduced into the membrane. The introduction of nanowires improved the membrane hydrophilicity and roughness, which is conducive to the improvement of membrane flux. Membrane separation performance for one component solution and dye/salt solution were investigated. The introduction of Cu(OH)₂ increases the flux of the membrane obviously (the highest increase is 178.78% (from 21.49 to 38.42 L·m^-2·h^-1·bar^-1, for NaCl solution as the feed). Besides, the membrane doped with nanowires also possessed a high dye/salt selectivity. For one component solution, the dye removal rate was over 97.00% while the salt rejection was low (the lowest was 13.18% (NaCl)). For the dye/salt solution, the dye (Congo Red) rejection kept at a high level (98.91%) and the salt (NaCl) rejection was still low (13.71%), while the flux was also high (37.56 L·m^-2·h^-1·bar^-1). The performance is superior to that of many membranes reported in previous works. Moreover, the Cu(OH)₂ nanowires endowed the membrane with an improved and high antibacterial property. The sterilization rate of Escherichia coli and Staphylococcus aureus reached more than 99.99%.

D-spacing controllable GO membrane intercalated by sodium tetraborate pentahydrate for dye contamination wastewater treatment

Sodium tetraborate pentahydrate (STB) was intercalated into graphene oxide (GO) nanosheets to form a nanocomposite (STB@GO). Subsequently, it was self-assembled on a substrate membrane to prepare STB@GO nanofiltration membrane. The properties of the STB@GO powder samples and the nanofiltration membrane were studied using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), contact angle (CA), and zeta potential. When the STB concentration was 1.0 g/L in the cross-linking reaction, the membrane was described as the STB₂@GO membrane and exhibited a large interlayer space (d-spacing = 1.347 nm), high hydrophilicity (CA = 22.2°), and high negative potential (zeta = -18.0 mV). Meanwhile, the pure water flux of the membrane was significantly increased by 56.60% than that of the GO membrane. In addition, the STB₂@GO membrane exhibited a favorable capability for dye rejection,98.52% for Evans blue (EB), 99.26% for Victoria blue B (VB), 91.94% for Alizarin yellow (AY), and 93.21% for Neutral red (NR). Furthermore, the STB₂@GO membrane performed better in dye separation under various types and concentrations of dye, pH values, and ions in solution. Thus, this study provides a promising method for preparing laminated GO nanofiltration membranes for dye wastewater treatment.

Tailored design of nanofiltration membranes for water treatment based on synthesis-property-performance relationships

Tailored design of high-performance nanofiltration (NF) membranes is desirable because the requirements for membrane performance, particularly ion/salt rejection and selectivity, differ among the various applications of NF technology ranging from drinking water production to resource mining. However, this customization greatly relies on a comprehensive understanding of the influence of membrane fabrication methods and conditions on membrane properties and the relationships between the membrane structural and physicochemical properties and membrane performance. Since the inception of NF, much progress has been made in forming the foundation of tailored design of NF membranes and the underlying governing principles. This progress includes theories regarding NF mass transfer and solute rejection, further exploitation of the classical interfacial polymerization technique, and development of novel materials and membrane fabrication methods. In this critical review, we first summarize the progress made in controllable design of NF membrane properties in recent years from the perspective of optimizing interfacial polymerization techniques and adopting new manufacturing processes and materials. We then discuss the property-performance relationships based on solvent/solute mass transfer theories and mathematical models, and draw conclusions on membrane structural and physicochemical parameter regulation by modifying the fabrication process to improve membrane separation performance. Next, existing and potential applications of these NF membranes in water treatment processes are systematically discussed according to the different separation requirements. Finally, we point out the prospects and challenges of tailored design of NF membranes for water treatment applications. This review bridges the long-existing gaps between the pressing demand for suitable NF membranes from the industrial community and the surge of publications by the scientific community in recent years.

Tunable Graphene Oxide Nanofiltration Membrane for Effective Dye/Salt Separation and Desalination

Effective dye separation and desalination are critical for the treatment of highly saline textile wastewater with dye mixtures. In this study, a graphene oxide (GO) membrane with a tunable interlayer distance (d) was fabricated to generate clean water via two-stage filtration, namely, the dye/salt separation and desalination stages. In the first stage, under low pressure (e.g., 0.3 MPa), the membrane with a d value of ca. 7.60 Å was suitable for removing the dye from the saline wastewater. The dye and salt (i.e., Na₂SO₄) rejection rates of >99% and <6.5% were achieved, respectively, indicating the significant potential to recycle the dyes from the highly saline dye wastewater. In the second stage, under a higher pressure (e.g., 0.8 MPa), the d value was reduced to ca. 7.15 Å, bestowing the membrane with a desalination function. The desalination rate of a single filtration process could reach up to 51.8% from 1.0 g/L saline (i.e., Na₂SO₄) water. The as-prepared membrane also exhibited excellent practical advantages, including ultrahigh permeability, significant antifouling (against dye) performance, and excellent stability. Furthermore, with the stacking of multistage filtration systems, the proposed membrane technology will be capable of regenerating dye and producing clean water.

A novel water-stable two-dimensional zeolitic imidazolate frameworks thin-film composite membrane for enhancements in water permeability and nanofiltration performance

Polymer membranes for water treatment are constrained by the permeability-separation trade-off. Herein, two-dimensional (2D) zeolitic imidazolate frameworks (ZIFs) made of benzimidazole interconnected with Zn ions are used to create 2D Zn₂(Bim)₄ molecular sieve nanosheets, which is explored as an asymmetric, thin-film composite (TFC) nanofiltration (NF) membrane for removing organic dyes and salts from water with a high water permeability under a low operating pressure (1 bar). The 2D Zn₂(Bim)₄ TFC NF membrane is synthesized via ionic bonds between polycations and the peripheral hydroxy groups of 2D Zn₂(Bim)₄ nanosheets, regulating the assembly of 2D Zn₂(Bim)₄ to create a novel crack-free functional layer on top of a polyvinylidene fluoride (PVDF) ultrafiltration membrane. FESEM and XPS confirmed the presence of a polycations-regulated ultrathin functional layer with a thickness of ∼37 nm on the PVDF support. Benefiting from its structural feature, our 2D Zn₂(Bim)₄ TFC NF membrane could achieve an ultra-high flux of ∼290 L/(m²·h·bar) (5-10-fold higher than that of graphene-based membranes), good anti-fouling properties and high rejection rates (above 98%) for organic dyes. Moreover, the desalinization rate is 50-75%. That is, our membrane is endowed with NF capability, and its intrinsic ultrafiltration features (high water permeance, ultrafast, and energy-saving) are also well maintained.

Zwitterionic Hydrogel-Impregnated Membranes with Polyamide Skin Achieving Superior Water/Salt Separation Properties

Support-free nonporous membranes have emerged as a new material platform for osmotic pressure-driven processes due to its insusceptibility to internal concentration polarization (ICP). Herein, we demonstrate high-performance membranes of zwitterionic hydrogels impregnated in porous membranes with a skin layer of highly cross-linked polyamides on both sides prepared by gel-liquid interfacial polymerization (GLIP). Such a configuration eliminates the pores and thus ICP, while the thin polyamide layer provides high salt rejection but negligible resistance to the water transport compared with the hydrogels. The polyamide skin layers are characterized using scanning electron microscopy and atomic force microscopy. The effect of the hydrogel compositions and polyamide formation conditions on the water/salt separation properties is thoroughly investigated. Example membranes show water permeance and salt rejection comparable to state-of-the-art commercial forward osmosis membranes and essentially no ICP.

Grafting Activated Graphene Oxide Nanosheets onto Ultrafiltration Membranes Using Polydopamine to Enhance Antifouling Properties

Graphene oxide (GO) nanosheets are negatively charged and exhibit excellent antifouling properties. However, their hydrophilicity makes it challenging for their grafting onto membrane surfaces to improve antifouling properties for long-term underwater operation. Herein, we demonstrate a versatile approach to covalently graft GO onto ultrafiltration membrane surfaces in aqueous solutions at ≈22 °C. The membrane surface is first primed using dopamine and then reacted with activated GO (aGO) containing amine-reactive esters. The aGO grafting improves the membrane surface hydrophilicity without decreasing water permeance. When the membranes are challenged with 1.0 g/L sodium alginate in a constant-flux crossflow system, the aGO grafting increases the critical flux by 20% and reduces the fouling rate by 63% compared with the pristine membrane. The modified membranes demonstrate stability for 48 h operation and interval cleanings using NaOH solutions.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Mesoporous Silica Thin Membrane with Tunable Pore Size for Ultrahigh Permeation and Precise Molecular Separation

We report on our use of a thin-layered vertical mesoporous silica thin film (MSTF) with tunable pore size overlaid on an anodic aluminum oxide (AAO) membrane for advancing water purification. The features of ultrathin thickness (about 20 nm), a uniform vertical pore orientation, low tortuosity, high porosity, and a hydrophilic surface endow the MSTF membranes with ultrahigh water permeability compared with that of state-of-the-art membranes. The modified E-MSTF membrane with a small pore diameter of 2.1 ± 0.1 nm demonstrates superior nanofiltration performance for dye molecules with a cutoff of 520 Da and ultrahigh water permeability of 310 ± 8 L m^-2 h^-1 bar^-1. Furthermore, the precise molecular sieving of dye/salt mixtures was realized with outstanding salt permeation (97.5% NaCl, 96.0% Na₂SO₄) and a high retention of dye (99.0%). The water permeance and selectivity of the modified E-MSTF membrane are higher than that of reported membranes with similar dye rejections. This work opens up new avenues for constructing tailor-made membranes with tunable pore size and remarkable separation performance.

Reduced Holey Graphene Oxide Membranes for Desalination with Improved Water Permeance

Reduced graphene oxide (r-GO) membranes with narrow channels exhibit salt rejections comparable to conventional nanofiltration (NF) membranes. However, their water permeances are much lower because of the high tortuosity for water permeation. Herein, we report a facile solution-processable approach to create in-plane nanopores on GO nanosheets before reduction, dramatically decreasing the tortuosity and increasing water permeance while retaining the salt rejection. Specifically, holey GO (HGO) nanosheets were prepared via chemical etching using hydrogen peroxide followed by the deposition on a porous support by vacuum filtration and then reduction via exposure to hydriodic acid solutions to generate the reduced HGO (r-HGO) membrane. The generation of nanopores increases the water permeance from 0.4 L m^-2 h^-1 bar^-1 (LMH/bar) to 6.6 LMH/bar with Na₂SO₄ rejection greater than 98.5%, and the membranes were robust under strong cross-flow shearing force for 36 h. Both water permeance and Na₂SO₄ rejection of these r-HGO membranes for the first time simultaneously reach the level of the commercial polyamide-based NF membranes. Given their good antibacterial properties and resistance to aggressive chemical washing, the r-HGO membranes show promise as next-generation NF membranes for desalination.

Regulating the Interlayer Spacing of Graphene Oxide Membranes and Enhancing their Stability by Use of PACl

Graphene oxide (GO) is an ideal membrane material for water treatment due to its outstanding physicochemical properties and unique lamellar structure. However, the separation performance and practical application of GO membranes are mainly affected by the interlayer spacing and stability in aqueous solutions. Here, we report a novel and facile approach to fabricating GO membranes with adjustable interlayer spacing and high stability in aqueous solutions through cross-linking with polyaluminum chloride (PACl). With this approach, the lamellar spacing can be adjusted by changing the OH/Al ratios (B values) of the PACl, and the GO nanosheets can be tightly bonded by the strong electrostatic effect that PACl provides between them. The average interlayer spacing of the GO layer could be varied approximately in the range of 0.80-1.09 nm. The PACl-GO membranes demonstrated excellent stability in water and inorganic/organic solutions when the concentration of PACl was 0.1, 1, and 10 mM, remaining unchanged for at least 2 weeks. Moreover, the PACl-GO membranes featured exceptional sieving capabilities for model and natural organic substrates, while it was also observed that increasing the interlayer spacing of the PACl-GO membranes increased both the membrane flux and the separation performance of organic matter.