Standardization of a UV LED Peak Wavelength, Emission Spectrum, and Irradiance Measurement and Comparison Protocol

Tailored hybrid microbial water disinfection system using sequentially assembled microbial fuel cells and an ultraviolet C light-emitting diode

An integrated ultraviolet C light-emitting diode (UV-C LED) water disinfection system activated by microbial fuel cells (MFCs) was developed, and optimized via electric circuit and device voltage profiling. The intensity of the renewable energy operated, self-powered UV-C LED for E. coli inactivation was calculated by bio-dosimetry to be 2.4  × 10-2 μW cm-2 using fluence-based rate constant (k) of ∼1.03 (±0.11) cm2/mJ to obtain the reduction equivalent fluence kinetics value. Finally, the first-order rate constant for E. coli inactivation during the tailored hybrid disinfection system was found to be 0.53 (±0.1) cm2/mJ by multiplying intensity with 1.09 (±0.1) × 10-5 s-1 derived from the linear regression of E. coli inactivation as a function of time. Furthermore, selected model microbial consisting of two bacteria (Salmonella sp. and Listeria sp.) and three viruses (MS2 bacteriophage, influenza A virus, and murine norovirus-1) were treated with UV-C LED irradiation under controlled experimental conditions to validate the disinfection efficiency of the system. Consequently, the required to achieve significant removal (i.e., >3-log; 99.9%) UV fluence and dose time were calculated to be 4-7 cm2/mJ and 54-76 h and 33-53 cm2/mJ and 400-622 h for model bacterial and viral, respectively. This study expands the applicability of microbial electrochemical system (MES) for microbial disinfection and could be utilized in future MFCs implementation studies for predicting and measuring the kinetics of microbial elimination using a tailored hybrid water treatment system.

A Critical Review on Ultraviolet Disinfection Systems against COVID-19 Outbreak: Applicability, Validation, and Safety Considerations

The global health-threatening crisis from the COVID-19 pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), highlights the scientific and engineering potentials of applying ultraviolet (UV) disinfection technologies for biocontaminated air and surfaces as the major media for disease transmission. Nowadays, various environmental public settings worldwide, from hospitals and health care facilities to shopping malls and airports, are considering implementation of UV disinfection devices for disinfection of frequently touched surfaces and circulating air streams. Moreover, the general public utilizes UV sterilization devices for various surfaces, from doorknobs and keypads to personal protective equipment, or air purification devices with an integrated UV disinfection technology. However, limited understanding of critical UV disinfection aspects can lead to improper use of this promising technology. In this work, fundamentals of UV disinfection phenomena are addressed; furthermore, the essential parameters and protocols to guarantee the efficacy of the UV sterilization process in a human-safe manner are systematically elaborated. In addition, the latest updates from the open literature on UV dose requirements for incremental log removal of SARS-CoV-2 are reviewed remarking the advancements and existing knowledge gaps. This study, along with the provided illustrations, will play an essential role in the design and fabrication of effective, reliable, and safe UV disinfection systems applicable to preventing viral contagion in the current COVID-19 pandemic, as well as potential future epidemics.

UV Photolysis of Mono- and Dichloramine Using UV-LEDs as Radiation Sources: Photodecay Rates and Radical Concentrations

UV-LEDs with four characteristic wavelengths (255, 265, 285, and 300 nm) were used to investigate the wavelength-dependence of the photolysis of two inorganic chloramines (NH₂Cl and NHCl₂) and their subsequent radical formation. The fluence-based photodecay rates of NH₂Cl decreased with increasing wavelength from 255 to 300 nm, while NHCl₂ photodecay rates exhibited the opposite wavelength-dependence. The fluence-based photodecay rate of NH₂Cl was comparable to that of NHCl₂ at 255 nm, but was lower than NHCl₂ at other tested wavelengths. The wavelength-dependence was more influenced by the molar absorption coefficient than the apparent/innate quantum yield and the lower photosensitivity was mainly attributed to the higher bond (N-Cl) dissociation energy (BDE) of NH₂Cl than NHCl₂. The steady-state concentrations of HO^• and reactive chlorine species (e.g., Cl₂^•-, ClO^•, and Cl^•) that were generated from the photolysis of NH₂Cl and NHCl₂ at different wavelengths were determined experimentally and compared with the simulated results by a kinetic model. UV photolysis of NHCl₂ at 265, 285, and 300 nm generated higher concentrations of radicals (e.g., HO^•, ClO^•, Cl^•, and Cl₂^-•) than NH₂Cl, while UV photolysis of NH₂Cl at 255 nm generated higher concentrations of HO^•, ClO^•, and Cl^• but not Cl₂^-• than NHCl₂. The findings of this study provide fundamental information to be used in selecting specific wavelengths of UV radiation for enhancing/optimizing NH₂Cl/NHCl₂ photodecay in swimming pools and radical generation for micropollutant abatement in drinking water treatment or potable water reuse.