Structure-Property-Toxicity Relationships of Graphene Oxide: Role of Surface Chemistry on the Mechanisms of Interaction with Bacteria

Photo-transformation of graphene oxide in synthetic and natural waters

Graphene oxide (GO) is widely employed due to its outstanding properties, leading to an increasing release into the environment and natural waters. Although some studies have reported on the photo-transformation of GO, its behavior in complex natural waters remains inadequately explored. This study demonstrates that different types of ions may promote the photoreduction of GO in the order of Ca2+ > K+ > NO3- > Na+ by interacting with the functional groups on the surface of GO, and the photoreduction is enhanced with increasing ion concentrations. Additionally, natural organic matter (NOM) can inhibit the photoreduction of GO by scavenging reactive oxygen species. However, with increasing NOM concentrations (≥ 5 mgC/L), more NOM adsorb onto the surface of GO through hydrogen bonding, Lewis acid-base interactions, and π-π interactions, thereby enhancing the photoreduction of GO. On this basis, our results further indicate that the combined effects of different ions, such as Ca2+, Mg2+, NOM, and other complex hydrochemical conditions in different natural waters can promote the photoreduction of GO, resulting in a reduction in oxygen functional groups and the formation of defects. This study provides a theoretical basis for assessing the long-term transformation and fate of GO in natural waters.

Identifying the Stripping of Oxide Debris from Graphene Oxide: Evidence from Experimental Analysis and Molecular Simulation

In this study, characteristics of oxidation debris (OD) and its stripping mechanism from graphene oxide (GO) were explored. The results demonstrated that OD contains three components, namely, protein-, fulvic acid-, and humic acid-like substances; among these, protein-like substances with lower molecular weight and higher hydrophilicity were most liable to be stripped from GO and were the primary components stripped from GO at pH < 10, whereas humic acid- and fulvic acid-like substances were stripped from GO at pH > 10. During the stripping of OD, hydrogen bonds from carboxyl and carbonyl were the first to break, followed by hydrogen bonds from epoxy. Subsequently, π-π interactions were broken, and hydrogen bond interactions induced by hydroxyl groups were the hardest to break. After the stripping of OD, the recombination of OD on GO was observed, and regions containing relatively fewer oxygen-containing functional groups were favorable binding sites for the readsorbed OD. The stripping and recombination of OD on GO resulted in an uneven GO surface, which should be considered during the development of GO-based environmental materials and the evaluation of their environmental behavior.

Assessment of co-contaminated soil amended by graphene oxide: Effects on pollutants, microbial communities and soil health

Graphene oxide (GOx) is a nanomaterial with demonstrated capacity to remove metals from water. However, its effects on organic pollutants and metal(loid)s present in polluted soils when used for remediation purposes have not been extensively addressed. Likewise, few studies describe the effects of GOx on edaphic properties and soil biology. In this context, here we assessed the potential of GOx for remediating polluted soil focusing also on different unexplored effects of GOx in soil. To achieve this, we treated soil contaminated with concurrent inorganic (As and metals) and organic pollution (TPH and PAHs), using GOx alone and in combination with nutrients (N and P sources). In both cases increased availability of As and Zn was observed after 90 days, whereas Cu and Hg availability was reduced and the availability of Pb and the concentration of organic pollutants were not significantly affected. The application of GOx on the soil induced a significant and rapid change (within 1 week) in microbial populations, leading to a transient reduction in biodiversity, consistent with the alteration of several soil properties. Concurrently, the combination with nutrients exhibited a distinct behaviour, manifesting a more pronounced and persistent shift in microbial populations without a decrease in biodiversity. On the basis of these findings, GOx emerges as a versatile amendment for soil remediation approaches.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Cerium oxide nanoparticles: Synthesis methods and applications in wound healing

Wound care and treatment can be critical from a clinical standpoint. While different strategies for the management and treatment of skin wounds have been developed, the limitations inherent in the current approaches necessitate the development of more effective alternative strategies. Advances in tissue engineering have resulted in the development of novel promising approaches for accelerating wound healing. The use of various biomaterials capable of accelerating the regeneration of damaged tissue is critical in tissue engineering. In this regard, cerium oxide nanoparticles (CeO2 NPs) have recently received much attention because of their excellent biological properties, such as antibacterial, anti-inflammatory, antioxidant, and angiogenic features. The incorporation of CeO2 NPs into various polymer-based scaffolds developed for wound healing applications has led to accelerated wound healing due to the presence of CeO2 NPs. This paper discusses the structure and functions of the skin, the wound healing process, different methods for the synthesis of CeO2 NPs, the biological properties of CeO2 NPs, the role of CeO2 NPs in wound healing, the use of scaffolds containing CeO2 NPs for wound healing applications, and the potential toxicity of CeO2 NPs.

Toxicity mechanisms of graphene oxide and cadmium in Microcystis aeruginosa: evaluation of photosynthetic and oxidative responses

The potential ecotoxicological hazard of gaphene oxide (GO) is not fully clarified for photoautotrophic organisms, especially when the interactions of GO with other environmental toxicants are considered. The objective of the current study was to better understand the mechanisms of toxicity of GO in the cyanobacteria Microcystis aeruginosa, and to identify its interactions with cadmium (Cd). The individual and combined contribution of both pollutants in cyanobacteria were evaluated after 96 hours of exposure to GO and/or Cd, using photosynthetic pigments, photosynthetic parameters, cellular indicators of peroxidative damage, viability, and intracellular ROS formation as indicators of toxicity. Interactions between GO and Cd were evaluated using Toxic Units based on the EC50 of each parameter evaluated. The results of this study indicate that single concentrations ≥ 5 µg mL-1 of GO and ≥ 0.1 µg mL-1 of Cd induced a decrease in cell biomass and a change in the photosynthetic parameters associated with primary productivity in M. aeruginosa. In the combined experiments, higher GO ratios (≥ 9.1 µg mL-1) in terms of Toxic Units decreased photochemical processes and cellular metabolism, increased oxidative stress, and ultimately affected the size of M. aeruginosa. Finally, the relationship between GO concentration, Cd concentration, and the adsorption capacity of GO with respect to the co-pollutant must be taken into account when assessing the environmental risk of GO in aquatic environments.

Graphene oxide affects bacteriophage infection of bacteria by promoting the formation of biofilms

Graphene oxide (GO) is increasingly used in a range of fields, such as electronics, biosensors, drug delivery, and water treatment, and the likelihood of its release into the environment is increasing correspondingly. GO is involved in the formation of biofilms and leads bacteria to over proliferate, but the effects of GO on bacteriophage infection remain unexplored. We noted bacterial overgrowth in experiments when GO was used to treat the bacterial culture medium, leading us to question whether bacterial proliferation caused by GO affects phage infection of target bacteria. Treating Pseudomonas aeruginosa with GO at a low dosage (0.02 mg/mL) led to biofilm expansion in LB medium. Biofilm formation in the presence of GO affected the ability of bacteriophages to kill bacteria and reproduce. Similarly, the presence of GO deposits increased the ratio of bacteria to phage, providing a favorable environment for bacterial growth. Additionally, increasing the positive electrical charge in the culture environment inhibited the rejection of bacteriophages by negatively charged GO, improving phage reproduction. Finally, adding GO to sewage in imitation field experiments significantly increased the bacterial diversity and richness in the sewage, stimulating a significant increase in the variety and number of bacteria. Collectively, these results indicate that GO hinders phage infection by providing a bacterial refuge. The results of this study provide valuable insights into how GO interacts with bacteriophages to explore the effects on bacterial growth.

Defining the Surface Oxygen Threshold That Switches the Interaction Mode of Graphene Oxide with Bacteria

As antimicrobials, graphene materials (GMs) may have advantages over traditional antibiotics due to their physical mechanisms of action which ensure less chance of development of microbial resistance. However, the fundamental question as to whether the antibacterial mechanism of GMs originates from parallel interaction or perpendicular interaction, or from a combination of these, remains poorly understood. Here, we show both experimentally and theoretically that GMs with high surface oxygen content (SOC) predominantly attach in parallel to the bacterial cell surface when in the suspension phase. The interaction mode shifts to perpendicular interaction when the SOC reaches a threshold of ∼0.3 (the atomic percent of O in the total atoms). Such distinct interaction modes are highly related to the rigidity of GMs. Graphene oxide (GO) with high SOC is very flexible and thus can wrap bacteria while reduced GO (rGO) with lower SOC has higher rigidity and tends to contact bacteria with their edges. Neither mode necessarily kills bacteria. Rather, bactericidal activity depends on the interaction of GMs with surrounding biomolecules. These findings suggest that variation of SOC of GMs is a key factor driving the interaction mode with bacteria, thus helping to understand the different possible physical mechanisms leading to their antibacterial activity.

Role of Nanomaterials in the Fabrication of bioNEMS/MEMS for Biomedical Applications and towards Pioneering Food Waste Utilisation

bioNEMS/MEMS has emerged as an innovative technology for the miniaturisation of biomedical devices with high precision and rapid processing since its first R&D breakthrough in the 1980s. To date, several organic including food waste derived nanomaterials and inorganic nanomaterials (e.g., carbon nanotubes, graphene, silica, gold, and magnetic nanoparticles) have steered the development of high-throughput and sensitive bioNEMS/MEMS-based biosensors, actuator systems, drug delivery systems and implantable/wearable sensors with desirable biomedical properties. Turning food waste into valuable nanomaterials is potential groundbreaking research in this growing field of bioMEMS/NEMS. This review aspires to communicate recent progress in organic and inorganic nanomaterials based bioNEMS/MEMS for biomedical applications, comprehensively discussing nanomaterials criteria and their prospects as ideal tools for biomedical devices. We discuss clinical applications for diagnostic, monitoring, and therapeutic applications as well as the technological potential for cell manipulation (i.e., sorting, separation, and patterning technology). In addition, current in vitro and in vivo assessments of promising nanomaterials-based biomedical devices will be discussed in this review. Finally, this review also looked at the most recent state-of-the-art knowledge on Internet of Things (IoT) applications such as nanosensors, nanoantennas, nanoprocessors, and nanobattery.

Early Antimicrobial Evaluation of Nanostructured Surfaces Based on Bacterial Biological Properties

Nanostructured physical antibacterial surfaces are of great interest due to the increasing antibiotic resistance. In this work, the titania nanotube (TNT) array, a potential physical antibacterial surface, was used for antimicrobial evaluation. The early antibacterial properties of TNTs were assessed based on three growth phases of Staphylococcus aureus (S. aureus), and the physical factors influencing the antibacterial properties were comprehensively discussed. The results show apparent early antibacterial effects of TNTs, including the anti-initial attachment during the lag phase, the inhibition of proliferation and bactericidal effect during the logarithmic phase, and the inhibition of biofilm formation during the stationary phase. These antimicrobial effects are closely related to the combined influence of various physical properties of TNTs, such as diameter, hydrophilicity, roughness, and charge. The present work suggests that the evaluation of the early antimicrobial behavior of biomaterials should pay more attention on the biological characteristics of bacteria.

"Attacking-Attacking" Anti-biofouling Strategy Enabled by Cellulose Nanocrystals-Silver Materials

The development of high-performance anti-biofouling surfaces is paramount for controlling bacterial attachment and biofilm growth in biomedical devices, food packing, and filtration membranes. Cellulose nanocrystals (CNCs), a carbon-nanotube-like nanomaterial, have emerged as renewable and sustainable antimicrobial agents. However, CNCs inactivate bacteria under contact-mediated mechanisms, limiting its antimicrobial property mostly to the attached bacteria. This study describes the combination of CNCs with silver nanoparticles (CNC/Ag) as a strategy to increase their toxicity and anti-biofouling performance. CNC/Ag-coated surfaces inactivated over 99% of the attached Escherichia coli and Bacillus subtilis cells compared to 66.9 and 32.9% reduction shown by the pristine CNC, respectively. CNC/Ag was also very toxic to planktonic cells, displaying minimal inhibitory of 25 and 100 μg/mL against B. subtilis and E. coli, respectively. CNC/Ag seems to inactivate bacteria through an "attacking-attacking" mechanism where CNCs and silver nanoparticles play different roles. CNCs can kill bacteria by piercing the cell membrane. This physical membrane stress-mediated mechanism is demonstrated as lipid vesicles release their encapsulated dye upon contact with CNCs. Once the cell membrane is punctured, silver ions can enter the cell passively and compromise the integrity of DNA and other organelles. Inside the cells, Ag⁺ may damage the cell membrane by selectively interacting with sulfur and nitrogen groups of enzymes and proteins or by harming DNA via accumulation of reactive oxygen species. Therefore, CNC/Ag toxicity seems to combine the puncturing effect of the needle-like CNC and the silver's ability to impair the cell membrane and DNA functionalities.

Controlled Release of Molecular Intercalants from Two-Dimensional Nanosheet Films

Solution co-deposition of two-dimensional (2D) nanosheets with chemical solutes yields nanosheet-molecular heterostructures. A feature of these macroscopic layered hybrids is their ability to release the intercalated molecular agent to express chemical functionality on their surfaces or in their near surroundings. Systematic design methods are needed to control this molecular release to match the demand for rate and lifetime in specific applications. We hypothesize that release kinetics are controlled by transport processes within the layered solids, which primarily involve confined molecular diffusion through nanochannels formed by intersheet van der Waals gaps. Here a variety of graphene oxide (GO)/molecular hybrids are fabricated and subject to transient experiments to characterize release kinetics, locations, and mechanisms. The measured release rate profiles can be successfully described by a numerical model of internal transport processes, and the results used to extract effective Z-directional diffusion coefficients for various film types. The diffusion coefficients are found to be 8 orders of magnitude lower than those in free solution due to nanochannel confinement and serpentine path effects, and this retardation underlies the ability of 2D materials to control and extend release over useful time scales. In-plane texturing of the heterostructured films by compressive wrinkling or crumpling is shown to be a useful design tool to control the release rate for a given film type and molecular intercalant. The potential of this approach is demonstrated through case studies on the controlled release of chemical virucidal agents.

Mechanisms of the Aggregation of Graphene Oxide at High pH: Roles of Oxidation Debris and Metal Adsorption

In this work, aggregation of graphene oxide (GO) in synthetic surface water at high pH was elaborated, and experimental characterizations and molecular dynamics simulations were employed to uncover the mechanisms. According to previous studies, aggregation of GO is supposed to be impossible at high pH considering the deprotonation of functional groups on GO and the increased electrostatic repulsions. However, significant aggregations and a reversed trend in zeta potential at high pH were observed. One of the mechanisms was that the promoted metal adsorption at high pH can offset the negative charges generated by the deprotonation. Additionally, the stripping of oxidation debris (OD) on GO also contributes to the unexpected trend in the aggregation behavior and zeta potential. GO consists of lightly oxidized functionalized graphene (FG) sheets and highly oxidized OD. Upon the increase of pH and the deprotonation of functional groups on FG and OD, OD was stripped from FG, which decreased the electrostatic repulsions between FG sheets and accelerated the aggregation. The stripped ODs may recombine to FG edges and bridged FG sheets, which also contribute to the aggregation. Upon the stripping of OD and microstructure transformation of FG, FG-water-OD aggregates formed. According to this study, the aggregation of GO was accompanied by deprotonation of functional groups, metal adsorption, and surface property transformation triggered by the stripping of ODs and should be considered during the development of GO-related nanomaterials and the evaluation of its environmental impact.

Direct and Indirect Genotoxicity of Graphene Family Nanomaterials on DNA-A Review

Graphene family nanomaterials (GFNs), including graphene, graphene oxide (GO), reduced graphene oxide (rGO), and graphene quantum dots (GQDs), have manifold potential applications, leading to the possibility of their release into environments and the exposure to humans and other organisms. However, the genotoxicity of GFNs on DNA remains largely unknown. In this review, we highlight the interactions between DNA and GFNs and summarize the mechanisms of genotoxicity induced by GFNs. Generally, the genotoxicity can be sub-classified into direct genotoxicity and indirect genotoxicity. The direct genotoxicity (e.g., direct physical nucleus and DNA damage) and indirect genotoxicity mechanisms (e.g., physical destruction, oxidative stress, epigenetic toxicity, and DNA replication) of GFNs were summarized in the manuscript, respectively. Moreover, the influences factors, such as physicochemical properties, exposure dose, and time, on the genotoxicity of GFNs are also briefly discussed. Given the important role of genotoxicity in GFNs exposure risk assessment, future research should be conducted on the following: (1) developing reliable testing methods; (2) elucidating the response mechanisms associated with genotoxicity in depth; and (3) enriching the evaluation database regarding the type of GFNs, applied dosages, and exposure times.

Plasma induced efficient removal of antibiotic-resistant Escherichia coli and antibiotic resistance genes, and inhibition of gene transfer by conjugation

Antibiotic-resistant bacteria (ARB) and their resistance genes (ARGs) are emerging environmental pollutants that pose great threats to human health. In this study, a novel strategy using plasma was developed to simultaneously remove antibiotic-resistant Escherichia coli (AR bio-56954 E. coli) and its ARGs, aiming to inhibit gene transfer by conjugation. Approximately 6.6 log AR bio-56954 E. coli was inactivated within 10 min plasma treatment, and the antibiotic resistance to tested antibiotics (tetracycline, gentamicin, and amoxicillin) significantly decreased. Reactive oxygen and nitrogen species (RONS) including •OH, ¹O₂, O₂•^-, NO₂^-, and NO₃^- contributed to ARB and ARGs elimination; their attacks led to destruction of cell membrane, accumulation of excessive intracellular reactive oxygen substances, deterioration of conformational structures of proteins, and destroy of nucleotide bases of DNA. As a result, the ARGs (tet(C), tet(W), blaTEM-1, aac(3)-II), and integron gene intI1), and conjugative transfer frequency of ARGs significantly decreased after plasma treatment. The results demonstrated that plasma has great prospective application in removing ARB and ARGs in water, inhibiting gene transfer by conjugation.

Similar toxicity mechanisms between graphene oxide and oxidized multi-walled carbon nanotubes in Microcystis aeruginosa

In photosynthetic microorganisms, the toxicity of carbon nanomaterials (CNMs) is typically characterized by a decrease in growth, viability, photosynthesis, as well as the induction of oxidative stress. However, it is currently unclear how the shape of the carbon structure in CNMs, such as in the 1-dimensional carbon nanotubes (CNTs) compared to the two-dimensional graphene oxide (GO), affects the way they interact with cells. In this study, the effects of GO and oxidized multi-walled CNTs were compared in the cyanobacterium Microcystis aeruginosa to determine the similarities or differences in how the two CNMs interact with and induce toxicity to cyanobacteria. Using change in Chlorophyll a concentrations, the effective concentrations inducing 50% inhibition (EC₅₀) at 96 h are found to be 11.1 μg/mL and 7.38 μg/mL for GO and CNTs, respectively. The EC₅₀ of the two CNMs were not found to be statistically different. Changes in fluorescein diacetate and 2',7'-dichlorodihydrofluorescein diacetate fluorescence, measured at the EC₅₀ concentrations, suggest a decrease in esterase enzyme activity but no oxidative stress. Scanning and transmission electron microscopy imaging did not show extensive membrane damage in cells exposed to GO or CNTs. Altogether, the decrease in metabolic activity and photosynthetic activity without oxidative stress or membrane damage support the hypothesis that both GO and CNTs induced indirect toxicity through physical mechanisms associated with light shading and cell aggregation. This indirect toxicity explains why the intrinsic differences in shape, size, and surface properties between CNTs and GO did not result in differences in how they induce toxicity to cyanobacteria.

Environmental transformation of graphene oxide in the aquatic environment

In recent years, research on graphene oxide (GO) has developed rapidly in both academic and industrial applications such as electronic, biosensor, drug delivery, water treatment and so forth. Based on the large amount of applications, it is anticipated that GO will inevitably find its own way to the environment, if used are not restricted to prevent their release. Environmental transformation is an important transformation process in the natural environment. In this review, we will summarize the recent developments on environmental transformation of GO in the aquatic environment. Although papers on environmental transformation of graphene-based nanomaterials can be found, a systematic picture describing photo-transformation of GO (dividing into different irradiation sources), environmental transformation of GO in the dark environmental, the environmental toxicity of GO are still lacking. Thus, it is essential to summarize how different light sources will affect the GO structure and reactive oxygen species generation in the photo-transformation process, how GO will react with various natural constituents in the aquatic environment, whether GO will toxic to different aquatic organisms and what will be the interactions between GO and the intracellular receptors in the intracellular level once GO released into the aquatic environment. This review will arouse the realization of potential risk that GO can bring to the aquatic environment and enlighten us to pay attention to behaviors of other two-dimensional GO-like nanomaterials, which have been intensively applied and studied in recent years.

Locally Enhanced Electric Field Treatment (LEEFT) Promotes the Performance of Ozonation for Bacteria Inactivation by Disrupting the Cell Membrane

The adoption of ozonation for water disinfection is hindered by its high ozone demand and the resulting high cost. Electric field treatment inactivates bacteria by physically disrupting the integrity of the cell membrane. Assisted by nanowire-modified electrodes, locally enhanced electric field treatment (LEEFT) reduces the required voltage to several volts to induce sufficient electric field strength for efficient bacteria inactivation. In this study, the LEEFT is applied as a pretreatment of ozonation for bacteria inactivation. Our results show that a low-voltage (<0.4 V) LEEFT has no obvious effect on the following ozonation, but a higher-voltage (0.6-1.2 V) LEEFT significantly enhances the ozone inactivation. After the LEEFT, a large number of viable cells with impaired cell membranes are observed, shown by both selective plate count and staining methods. The mechanism inducing the enhancement is explained by the initially reparable pores generated by LEEFT that cannot recover in the subsequent ozonation and the greater intracellular diffusion of ozone after the membrane disruption induced by LEEFT. The application of LEEFT as a pretreatment process is beneficial to reduce the ozone dosage and disinfection by-product formation with a broader inactivation spectrum, which facilitates the application of ozonation in primary water disinfection.

Unveiling the Synergistic Role of Oxygen Functional Groups in the Graphene-Mediated Oxidation of Glutathione

This is the first report of an atomic-scale direct oxidation mechanism of the thiol group in glutathione (GSH) by epoxides on graphene oxide (GO) at room temperature. The proposed reaction mechanism is determined using a coupled experimental and computational approach; active sites for the reaction are determined through examination of GO surface chemistry changes before and after exposure to GSH, and density functional theory (DFT) calculations determine the reaction barriers for the possible GO-GSH reaction schemes. The findings build on the previously established catalytic mechanism of GSH oxidation by graphenic nanocarbon surfaces and importantly identify the direct reaction mechanism which becomes important in low-oxygen environments. Experimental results suggest epoxides as the active sites for the reaction with GSH, which we confirm using DFT calculations of reaction barriers and further identify a synergism between the adjacent epoxide and hydroxyl groups on the GO surface. The direct oxidation mechanism at specific oxygen sites offers insight into controlling GO chemical reactivity through surface chemistry manipulations. This insight is critical for furthering our understanding of GO oxidative stress pathways in cytotoxicity as well as for providing rational material design for GO applications that can leverage this reaction.

Recent advances in ultrathin two-dimensional materials and biomedical applications for reactive oxygen species generation and scavenging

Graphene and graphene-like two-dimensional (2D) nanomaterials, such as black phosphorus (BP), transition metal carbides/carbonitrides (MXene) and transition metal dichalcogenides (TMD), have been extensively studied in recent years due to their unique physical and chemical properties. With atomic-scale thickness, these 2D materials and their derivatives can react with ROS and even scavenge ROS in the dark. With excellent biocompatibility and biosafety, they show great application potential in the antioxidant field and ROS detection for diagnosis. They can also generate ROS under light and be applied in antibacterial, photodynamic therapy (PDT), and other biomedical fields. Understanding the degradation mechanism of 2D nanomaterials by ROS generated under ambient conditions is crucial to developing air stable devices and expanding their application ranges. In this review, we summarize recent advances in 2D materials with a focus on the relationship between their intrinsic structure and the ROS scavenging or generating ability. We have also highlighted important guidelines for the design and synthesis of highly efficient ROS scavenging or generating 2D materials along with their biomedical applications.

Photo-transformation of graphene oxide in the presence of co-existing metal ions regulated its toxicity to freshwater algae

Graphene oxide (GO) sheets are unstable in aqueous environments, and the effect of photo-transformation on GO toxicity to freshwater algae (Chlorella pyrenoidosa) was investigated. Our results demonstrated that GO underwent photo-reduction under 25-day sunlight irradiation, and the transformation was generally completed at Day 8. The toxicological investigation showed that 8-day sunlight irradiation significantly increased growth inhibition of GO (25 mg/L) to algal cells by 11.2%, due to enhanced oxidative stress and stronger membrane damage. Low molecular weight (LMW) species were produced during the 8-day GO transformation, and they were identified as two types of aromatic compounds, which played a crucial role in increasing toxicity. The combined toxicity of GO and Cu²⁺ ions before and after light irradiation was further investigated. Antagonistic effect was observed between the toxicity of pristine GO and co-existing Cu²⁺ ions. After co-irradiation of GO and Cu²⁺ ions for 8 days, their combined toxicity was unexpectedly lower or insignificant in comparison with the treatments of pristine GO, or pristine GO in the presence of Cu²⁺ ions. Two mechanisms were revealed for this finding: (1) Cu²⁺ ions suppressed the photo-transformation of GO; (2) the toxicity of free Cu²⁺ ions was decreased through the adsorption/retention of Cu²⁺ ions and formation of Cu-based nanoparticles (e.g., Cu₂O and Cu₂S) on the photo-transformed GO. The provided data are helpful for better understanding the environmental process and risk of GO under natural conditions.