Colloidal Behaviors of Two-Dimensional Titanium Carbide in Natural Surface Waters: The Role of Solution Chemistry

Recent Advancement in Emerging MXene-Based Photocatalytic Membrane for Revolutionizing Wastewater Treatment

MXene-based photocatalytic membranes provide significant benefits for wastewater treatment by effectively combining membrane separation and photocatalytic degradation processes. MXene represents a pioneering 2D photocatalyst with a variable elemental composition, substantial surface area, abundant surface terminations, and exceptional photoelectric performance, offering significant advantages in producing high-performance photocatalytic membranes. In this review, an in-depth overview of the latest scientific progress in MXene-based photocatalytic membranes is provided. Initially, a brief introduction to the structure and photocatalytic capabilities of MXene is provided, highlighting their pivotal role in promoting the photocatalytic process. Subsequently, in pursuit of the optimal MXene-based photocatalytic membrane, critical factors such as the morphology, hydrophilicity, and stability of MXenes are meticulously taken into account. Various preparation strategies for MXene-based photocatalytic membranes, including blending, vacuum filtration, and dip coating, are also discussed. Furthermore, the application and mechanism of MXene-based photocatalytic membranes in micropollutant removal, oil-water separation, and antibacterial are examined. Lastly, the challenges in the development and practical application of MXene-based photocatalytic membranes, as well as their future research direction are delineated.

Influences of protein-corona on stability and aggregation kinetics of Ti3C2Tx nanosheets in aquatic environment

Proteins existed in aquatic environments strongly influence the transport, fate of nanomaterials due to the formation of protein-corona surrounding nanomaterials. To date, how do proteins affect the aggregation behaviors of MXene, a new family of two-dimensional materials, in aquatic environment remains unknown. Here the aggregation kinetics of MXene Ti₃C₂T_x nanosheets in various electrolytes (NaCl, CaCl₂ and Na₂SO₄) was investigated by time-resolved dynamic light scattering in absence or presence of bovine serum albumin (BSA). Results showed that BSA affected the aggregation of Ti₃C₂T_x in a concentration-dependent manner. Addition of 3 mg/L BSA decreased the critical coagulation concentrations (CCCs) of Ti₃C₂T_x about 1.6-2.1 times, showing obvious destabilization effect; while BSA greater than 30 mg/L created a high-protein environment covering Ti₃C₂T_x, producing high spatial repulsion and enhancing the dispersibility of Ti₃C₂T_x. Ca²⁺ ions have greater effect on the aggregation of Ti₃C₂T_x due to the larger surface charge and bridging effect. The interaction between Ti₃C₂T_x and BSA followed Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and mainly attributed to hydrogen bonding and van der Waals forces, while positively charged lysine and arginine in BSA might attract onto Ti₃C₂T_x through electrostatic attraction. The interaction decreased the content of α-helix structure in BSA from 74.7% to 53.1%. Ti₃C₂T_x easily suffered from aggregation and their long-distance transport seemed impossible in synthetic or natural waters. The present findings provided new insights for understanding the transfer and fate of this nanomaterial in aquatic environments.

Effects of soil colloids on the aggregation and degradation of engineered nanoparticles (Ti3C2Tx MXene)

Soil colloid is a nonnegligible factor when evaluating the environmental risk of engineered nanoparticles (ENPs) in the groundwater. In this study, the environmental fate of an emerging ENP (Ti₃C₂T_x MXene) in the groundwater was investigated for the first time, which currently poses a severe environmental risk due to its cytotoxicity but has received little attention. The colloidal dispersion stability and degradation kinetics of Ti₃C₂T_x MXene in the groundwater were evaluated by considering the effects of soil colloids prepared from sodium humate (SH), montmorillonite (MT), and a natural soil (NS) under variable solution chemistry. The results showed that the affinity of soil colloids with Ti₃C₂T_x followed an SH > MT > NS sequence. Increasing SH concentration led to Ti₃C₂T_x disaggregation by enhancing the electrical and steric repulsive forces, while MT and NS resulted in hetero-aggregation because of the elevated collision frequency. SH and MT enhanced the critical coagulation concentrations of Ti₃C₂T_x by 100 and 10 folders, respectively, via surface coating process, while NS slightly reduced due to the bridging effects induced by the soluble cations. The soil colloids promoted Ti₃C₂T_x degradation compared with their absence and in an SH > MT ≫ NS sequence. SH and MT were through forming Ti-O-C and Si-O-Ti bonds with Ti₃C₂T_x via their carboxyl and hydroxyl groups, respectively, rendering the Ti₃C₂T_x surface more reactive and faster degradation. NS showed a weak promotion effect because of its less affinity with Ti₃C₂T_x and limited organic matter and clay contents with hydroxyl and carboxyl groups. This study demonstrated the unstable environmental behaviors of Ti₃C₂T_x in the groundwater and mitigated its environmental risk concerns.

Insight into UV-induced simultaneous photocatalytic degradation of Ti3C2Tx MXene and reduction of U(VI)

With the development of MXene as the efficient adsorbent for U(VI), the tendency of MXene coming into contact with U(VI) in wastewaters increases. Motivated by UV light irradiation applied in wastewater treatments, the UV light induced photochemical co-transformation of Ti₃C₂T_x MXene and U(VI) is studied. To clarify the role of U(VI) induced Ti₃C₂T_x aggregation in phototransformation of Ti₃C₂T_x, the aggregation kinetics of Ti₃C₂T_x in the presence of various valent radioactive ions are investigated, obtaining the critical coagulation concentrations (CCC) of Ti₃C₂T_x for Cs⁺, Sr²⁺, UO₂²⁺, Eu³⁺, and Th⁴⁺. Besides, the colloidal stability of UV-induced Ti₃C₂T_x as a function of standing time is discussed. The results show that the aggregation behavior of Ti₃C₂T_x induced by radioactive ions follows the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and the Schulze-Hardy rule. The UV irradiation will change the physicochemical properties and colloidal stabilities of Ti₃C₂T_x. Furthermore, the degradation of Ti₃C₂T_x can be accelerated by UV irradiation and further promoted by the presence of U(VI). The removal of U(VI) is highest in the case of Ti₃C₂T_x combined with UV irradiation via adsorption and reduction. This study provides an example demonstrating that the simultaneous transformation of Ti₃C₂T_x (adsorbent) and U(VI) (adsorbate) to mild toxic components.

Safety Assessment of 2D MXenes: In Vitro and In Vivo

MXenes, representing a new class of two-dimensional nanomaterial, have attracted intense interest in a variety of fields as supercapacitors, catalysts, and sensors, and in biomedicine. The assessment of the safety of MXenes and related materials in biological systems is thus an issue that requires significant attention. In this review, the toxic effects of MXenes and their derivatives are summarized through the discussion of current research into their behaviors in mammalian cells, animals and plants. Numerous studies have shown that MXenes have generally low cytotoxicity and good biocompatibility. However, a few studies have indicated that MXenes are toxic to stem cells and embryos. These in vitro and in vivo toxic effects are strongly associated with the dose of material, the cell type, the mode of exposure, and the specific type of MXene. In addition, surface modifications alter the toxic effects of MXenes. The stability of MXenes must be considered during toxicity evaluation, as degradation can lead to potentially toxic byproducts. Although research concerning the toxicity of MXenes is limited, this review provides an overview of the current understanding of interactions of MXenes with biological systems and suggests future research directions.

Synergistic Effect of Metal Cations and Visible Light on 2D MoS2 Nanosheet Aggregation

Aggregation significantly influences the transport, transformation, and bioavailability of engineered nanomaterials. Two-dimensional MoS₂ nanosheets are one of the most well-studied transition-metal dichalcogenide nanomaterials. Nonetheless, the aggregation behavior of this material under environmental conditions is not well understood. Here, we investigated the aggregation of single-layer MoS₂ (SL-MoS₂) nanosheets under a variety of conditions. Trends in the aggregation of SL-MoS₂ are consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) colloidal theory, and the critical coagulation concentrations of cations follow the order of trivalent (Cr³⁺) < divalent (Ca²⁺, Mg²⁺, Cd²⁺) < monovalent cations (Na⁺, K⁺). Notably, Pb²⁺ and Ag⁺ destabilize MoS₂ nanosheet suspensions much more strongly than do their divalent and monovalent counterparts. This effect is attributable to Lewis soft acid-base interactions of cations with MoS₂. Visible light irradiation synergistically promotes the aggregation of SL-MoS₂ nanosheets in the presence of cations, which was evident even in the presence of natural organic matter. The light-accelerated aggregation was ascribed to dipole-dipole interactions due to transient surface plasmon oscillation of electrons in the metallic 1T phase, which decrease the aggregation energy barrier. These results reveal the phase-dependent aggregation behaviors of engineered MoS₂ nanosheets with important implications for environmental fate and risk.

New insights into the colloidal stability of graphene oxide in aquatic environment: Interplays of photoaging and proteins

Wide application leads to release of graphene oxide (GO) in aquatic environment, where it is subjected to photoaging and changes in physicochemical properties. As important component of natural organic matters, proteins may greatly affect the aggregation behaviors of photoaged GO. The effects of a typical model protein (bovine serum albumin, BSA) on the colloidal stability of photoaged GO were firstly investigated. Photoaging reduced the lateral size and oxygen-containing groups of GO, while the graphene domains and hydrophobicity increased as a function of irradiation time (0-24 h). Consequently, the photoaged GO became less stable than the pristine one in electrolyte solutions. Adsorption of BSA on the surface of the photoaged GO decreased as well, leading to thinner BSA coating on the photoaged GO. In the solutions with low concentrations of electrolytes, the aggregation rate constants (k) of all the photoaged GO firstly increased to the maximum agglomeration rate constants (k_fast, regime I), maintained at k_fast (regime Ⅱ) and then decreased to zero (regime Ⅲ) as the BSA concentration increased. In both regime I and III, the photoaged GO were less stable at the same BSA concentrations, and the impacts of BSA on the colloidal stability of the photoaged GO were less than the pristine one, which was attributed to the weaker interactions between the photoaged GO and BSA. This study provided new insights into the colloidal stability and fate of GO nanomaterials, which are subjected to extensive light irradiation, in wastewater and protein-rich aquatic environment.

Colloidal stability and correlated migration of illite in the aquatic environment: The roles of pH, temperature, multiple cations and humic acid

The mobility and environmental risk of colloids and associated pollutants are dependent on their dispersion stability under various conditions. In this work, the stability and correlated migration of illite colloids (IC) were systematically investigated over a wide range of aquatic chemistry conditions. The results showed that IC was aggregation favorable at low pH, low temperature and high ionic strength. The critical coagulation concentration (CCC) of IC increased exponentially with increasing values of r/Z³, following the Schulze-Hardy and Hofmeister series. Humic acid (HA) greatly mitigated colloid aggregation since the attachment of HA on IC surface increased the steric hindrance and electrostatic potential, and the enhancement of stability was linearly correlated with the HA concentration. The Derjaguin-Landau-Verwey-Overbeek (DLVO) model revealed that the interaction force deriving from van der Waals forces and electrostatic double-layer energy evolved as the aquatic chemistry varied, and the reduction in repulsion force between particles facilitated the colloid collision and then aggregation. The migration of IC in the porous sand column was highly correlated with the dispersion stability and filtration effect, the agglomerated colloids were redispersed and released when conditions favored dispersion. The illite colloids acted as efficient carriers for Eu(III) transport. These findings are essential for improving the understanding of the geological fate of environmental colloids and associated radionuclides.

Role of electrostatic interactions in the adsorption of dye molecules by Ti3C2-MXenes

MXenes, a new class of 2D materials, have recently attracted increasing attention as promising adsorbents for environmental remediation. It has been previously demonstrated that MXenes can successfully capture selected organic dyes from aqueous media; however, to date, the adsorption performance of MXenes for a wide variety of dyes in simulated real-life aquatic environments other than clean laboratory deionized (DI) water has not been systematically investigated. In this study, we systematically investigated the adsorption performance of delaminated Ti3C2-MXenes for six different organic dyes in aquatic media at different pH levels and ionic strengths. Our results strongly suggest the importance of the electrostatic interactions between the ionizable functional groups of MXenes and dyes for removal efficiency. The electrostatic repulsions between negatively charged MXenes and certain anionic dyes reduced the removal efficiencies of MXenes for these dyes in DI water; however, the presence of divalent cations significantly improved the removal efficiencies, possibly owing to the charge screening effects and like-charge attractions mediated by cation binding to the functionalities of dyes and MXenes. These results provide a rational strategy for optimizing the conditions for efficient removal of different types of organic dyes using MXenes.

Dispersibility and Photochemical Stability of Delaminated MXene Flakes in Water

The environmental stability of 2D MXene flakes must be systematically studied before their further application. Herein, the colloidal dispersibility and photochemical stability of delaminated Ti₃ C₂ T_x MXene flakes modified with hydrazine (HMH) and KOH and with water as the control (HMH-Ti₃ C₂ , KOH-Ti₃ C₂ , and H₂ O-Ti₃ C₂ , respectively) are experimentally and theoretically studied. Modification greatly increases the dispersibility of Ti₃ C₂ T_x flakes. Their critical coagulation concentrations are 28.7, 106, and 49.1 mm NaCl, and their Hamaker constants are 23.7 × 10^-21 , 19.1 × 10^-21 , and 37.7 × 10^-21 J, respectively; the colloidal interaction follows the classical Derjaguin-Landau-Verwey-Overbeek theory. HMH-Ti₃ C₂ and KOH-Ti₃ C₂ exhibit higher photochemical stability, as indicated by their stronger resistance to oxidation under UV and visible light irradiation. Changes in their physicochemical properties and the generation of reactive oxygen species (ROS) are assayed. Spin-polarized density functional theory calculations and molecular dynamics simulations are used to determine the mechanisms underlying the differences in the photochemical stability of Ti₃ C₂ T_x flakes. K⁺ ions protect the flakes from oxidation by acting as a middle layer to reduce the coupling between Ti³⁺ and ROS, while HMH provides stronger protection by absorbing photoelectrons or reacting with ROS. These findings provide new insight into the environmental transformation and design of functional MXenes.

Polyelectrolyte-grafted Ti3C2-MXenes stable in extreme salinity aquatic conditions for remediation of contaminated subsurface environments

Polyelectrolyte-grafted Ti₃C₂-MXenes display high colloidal stability and low adsorption to mineral substrates in extreme salinity aquatic media, while maintaining decent removal efficiency for aqueous organic dyes.