Comparative Life-Cycle Assessment of Aquifer Thermal Energy Storage Integrated with in Situ Bioremediation of Chlorinated Volatile Organic Compounds

Comparative life-cycle sustainability assessment of centralized and decentralized remediation strategies at the city level

Remediation of contaminated soil at industrial sites has become a challenge and an opportunity for sustainable urban land use, considering the substantial secondary impacts resulting from remediation activities. The design of soil remediation strategies for multi-site remediation from a regional perspective is of great significance for cities with a large number of brownfields. Centralized and decentralized facilities have been studied in different environmental fields, yet limited research has focused on centralized soil remediation, specifically the treatment of contaminated soil from different sites through the construction of shared soil treatment facilities. This study proposes a framework for comparing centralized and decentralized strategies for contaminated soil remediation based on the integration of life-cycle sustainability assessment and multi-objective optimization. With Zhuzhou, an industrial city in China, serving as an example, results show that after optimization, the centralized scenario can reduce total environmental impacts by 25 %-41 %. In addition, the centralized scenario can reduce economic costs by 27 %-39 %, saving up to 176 million USD. The advantages of the centralized soil remediation strategy include: (1) increased use of soil washing, (2) reduced use of off-site disposal, and (3) reduced construction and efficient utilization of soil treatment facilities. In conclusion, the centralized strategy is relatively suitable for cities or areas with a large number of medium or small-sized contaminated sites. The built framework can quantitatively evaluate multiple sites soil remediation at both the city and individual site level, allowing for a straightforward and objective comparison with the optimal remediation design.

Integration with carbon capture technology enables a positive carbon balance for sustainable rice paddy remediation with calcium‑silicon composites

In situ stabilization technologies based on lime-derived materials are extensively used for remediating Cd-contaminated paddy soils. However, the environmental impacts and carbon budget associated with these technologies throughout the paddy soil remediation life cycle are gaining increasing attention. Herein, through paddy field trials, two representative lime-derived materials, quicklime and calcium-silicon composite (Ca/Si), are evaluated for their remediation effectiveness and environmental sustainability in the remediation of Cd-contaminated soils. The results demonstrate that both quicklime and Ca/Si can reduce Cd bioavailability and enable the safe use of rice grain. Nevertheless, the life cycle assessment score of the quicklime case is 4.4 times that of the Ca/Si case, indicating that the quicklime case has a greater negative impact on the environment. Furthermore, the net ecosystem carbon budget analysis reveals that both lime-derived materials exhibit outward carbon emissions throughout their life cycle, in which the carbon emission of the quicklime case (-20.2 t CO2-eq/ha) is 20 times that of the Ca/Si case (-1 t CO2-eq/ha). Moreover, the implementation of carbon capture technology results in the Ca/Si case achieving a positive carbon budget and contributing to a carbon neutrality plan. Conversely, the quicklime case falls short, affording only a 24.8 % reduction in carbon emissions. Overall, this study provides valuable insights into the environmental sustainability of different lime-derived materials for paddy soil remediation and carbon mitigation.

Temperature-dependent dynamics of electrokinetic conservative and reactive transport in porous media: A model-based analysis

Electrokinetic techniques employ direct current electric fields to enhance the transport of amendments in low permeability porous media and have been demonstrated effective for in situ remediation of both organic contaminants and heavy metals. The application of electric potential gradients give rise to coupled chemical, hydraulic and electric fluxes, which are at the basis of the main transport mechanisms: electromigration and electroosmosis. Previous research has highlighted the significant impacts of charge interactions and fluid composition, including temperature-dependent properties such as electrolyte conductivity and density, on these transport phenomena. However, current models of electrokinetic applications often assume isothermal conditions and overlook the production of heat resulting from Joule heating. This study provides a detailed model-based investigation, systematically exploring the effects of temperature on electrokinetic conservative and reactive transport in porous media. By incorporating temperature-dependent material properties and progressively investigating the impact of temperature on each transport mechanism, we analyze the effects of temperature variations in both 1D and 2D systems. The study reveals how temperature dynamically influences the physical, chemical and electrostatic processes controlling electrokinetic transport. A temperature increase results in a higher speed of amendments delivery by both electromigration and electroosmosis and increases the kinetics of degradation reactions. The simulations also reveal a feedback mechanism in which higher aqueous conductivity results in increased Joule heating, leading to a faster temperature rise and, subsequently, to higher electrolyte conductivity. Finally, we estimate the electric energy requirements of the system at varying temperatures and show how these changes impact the rate of contaminant removal.

Aniline degradation and As (III) oxidation and immobilization by thermally activated persulfate

In the Pearl River Delta of China, many sites are likely contaminated with aniline in the soil and arsenic (As) in the groundwater because of a high As background level and the prevailing printing and dyeing industry. This study is to explore the remediation performance of thermally activated persulfate oxidation for the sites with these two contaminants, aniline and As. The As influence on the aniline degradation and vice versa are also systematically investigated. When the molar ratio of aniline to persulfate is 1: 4.65, over 85% of aniline can be degraded at 40 °C in 24 h, and 100 μg L-1 As(III) in solution can be completely adsorbed by the soil. A higher pH favored the aniline degradation but disfavored the As(III) oxidation. Due to the strong buffer capacity of the soil, aniline in the soil could be more quickly degraded than those in the solution. The As(III), however, seem more easily oxidized in the absence of soil. The coexisting Fe2+ can substantially improve As(III) oxidation and immobilization, although the dilute Fe2+ solution may suppress the aniline degradation. The presence of aniline severely inhibited the As(III) oxidation and adsorption, likely due to the competition for the generated free radicals and the adsorption sites on the soils. In contrast, the existing As(III) has a slight effect on aniline degradation. These findings are believed to provide the theoretical basis for the remediation of aniline-arsenic contaminated sites.

Assessing the environmental impacts and costs of biochar and monitored natural attenuation for groundwater heavily contaminated with volatile organic compounds

Although biochar (BC) and monitored natural attenuation (MNA) are regarded as green technologies for remediating volatile organic compounds (VOCs) contaminated groundwater, their life cycle environmental impacts and costs have not been systematically quantified. This work assessed the primary and secondary environmental impacts and the cost of three options for remediating the groundwater at a closed pesticide manufacturing plant site, which was contaminated by high levels of multiple VOCs and is undergoing MNA. The studied options include a combination of MNA and BC (MNA + BC), BC, and pump and treat (PT). The environmental impacts were examined through a Life Cycle Assessment (LCA) using the ReCiPe 2016 method. The costs were evaluated using a Life Cycle Cost (LCC) method created in the SimaPro. The LCA results show that the overall environmental impacts follow the sequence of PT > BC > MNA + BC, but MNA + BC shows evident primary impacts. The CO₂ eq emissions generated from PT are more than five times of MNA + BC or BC. The cement, electricity, and steel for construction, and the operation energy are the environmental hotspots in PT. In MNA + BC and BC, the electricity for feedstock pyrolysis is the environmental hotspot, while the use of BC by-products to generate heat and power has positive environmental credit that compensates other negative environmental burdens. Incorporating institutional controls, using renewable energy and recycled or alternative materials, and developing BC with superior adsorption capacity are recommended to optimize the remediation strategies. The LCC results show that PT renders the highest cost, with cement and electricity being the two most expensive items. Electricity is the dominant contributor to the costs of MNA + BC and BC, while the avoided heat and power generation can save the cost of other items. Overall, this study provides scientific support to develop and optimize green remediation solutions for VOCs contaminated groundwater.

Thermally enhanced bioremediation: A review of the fundamentals and applications in soil and groundwater remediation

Thermally enhanced bioremediation (TEB), a new concept proposed in recent years, explores the combination of thermal treatment and bioremediation to address the challenges of the low efficiency and long duration of bioremediation. This study presented a comprehensive review regarding the fundamentals of TEB and its applications in soil and groundwater remediation. The temperature effects on the bioremediation of contaminants were systematically reviewed. The thermal effects on the physical, chemical and biological characteristics of soil, and the corresponding changes of contaminants bioavailability and microbial metabolic activities were summarized. Specifically, the increase in temperature within a suitable range can proliferate enzymes enrichment, extracellular polysaccharides and biosurfactants production, and further enhancing bioremediation. Furthermore, a systematic evaluation of TEB applications by utilizing traditional in situ heating technologies, as well as renewable energy (e.g., stored aquifer thermal energy and solar energy), was provided. Additionally, TEB has been applied as a biological polishing technology post thermal treatment, which can be a cost-effective method to address the contaminants rebounds in groundwater remediation. However, there are still various challenges to be addressed in TEB, and future research perspectives to further improve the basic understanding and applications of TEB for the remediation of contaminated soil and groundwater are presented.

An analysis of design strategies for circular economy through life cycle assessment

The goal of pursuing the circular economy (CE) is spreading more and more in industry, also driven by the introduction of new regulations, considerably affecting product design. However, a quantitative and rigorous evaluation of the environmental impacts of the results obtained by different design strategies used to implementing CE is missing in the literature. Those available only evaluate certain aspects of the life cycle of few products, belonging to specific application fields, in a qualitative way or they refer only to the global warming potential. This study provides a quantitative assessment of the environmental impacts reductions arising from the application of some common design strategies for implementing different CE options (e.g. reuse, waste to energy, remanufacturing), by using some standard indicators. The results were obtained by manually analysing 156 selected case studies of comparative life cycle assessment (LCA), extracted from 136 scientific articles. In them, the environmental impacts of design solutions for CE are compared with those of other solutions were wastes are not exploited. The obtained results have been used to evaluate the different design strategies for CE and to hierarchize them based on environmental sustainability of the solutions associated with them. In addition, an economic evaluation of the strategies, based on the life cycle costing methodology and exploiting the data available in the same articles, was also provided. Among the main achievements, it was found that the hierarchy of the CE options, pursued by the design strategies, to improve environmental sustainability is different from that provided by other studies. In addition, the environmental benefits associated with the different CE options strictly depend by the applied design strategies and the considered products.

Geothermal heating: Is it a boon or a bane for bioremediation?

There has been a worldwide interest in renewable energy technologies, as a means of decreasing reliance on fossil fuels, minimizing climate change effects, and reducing greenhouse emissions. One such technology is geothermal heating where the constant subsurface temperature is used to cool or heat building interiors via heat pumps. In Canada, the use of geothermal heating has become a popular option for heating and cooling buildings, and it is anticipated that, in the near term, most large buildings will include geothermal heating as part of their climate control strategy. However, little is known about the environmental impacts of geothermal heating on the subsurface environment. The present review will examine the effect of geothermal heating on groundwater flow and remediation efforts, whereby the heat generated by geothermal systems may help with urban pollution. "Geothermal Remediation" could leverage the subsurface heating resulting from geothermal systems to accelerate biodegradation of certain petroleum-based pollutants at brown-field sites, while providing building(s) with sustainable heating and cooling. This idea coincides with the rising momentum towards sustainable and green remediation in Europe and the United States. To ensure that Geothermal Remediation is achievable, the effect of heat on bioremediation needs to be examined. This review provides an insight into what we know about heat effects on bioremediation activities and subsurface transport.

Comparative life cycle assessment of sewer corrosion control by iron salts: Suitability analysis and strategy optimization

Sewer deterioration caused by sulfide-induced concrete corrosion is spreading worldwide. Within the strategies to overcome this problem, dosing iron salts into the pipeline has attracted more attention. However, there is not yet research that evaluates this method whether it is overall environmentally friendly. Here, we conducted a comparative Life Cycle Assessment (LCA) to adjudge the benefits of dosing ferric chloride over non-dosing option in three different H₂S concentration levels (High, Medium, Low). Compared with taking no precautions, dosing ferric chloride performs better for all impact categories only in High H₂S situation, which can reduce the environmental impacts by 10% to 50%. In Medium H₂S situation, dosing ferric chloride shows lower environmental impacts of Global Warming, Fossil Fuel Depletion, Acidification, and Eutrophication, while leads to the deterioration of Human Toxicity and Freshwater Ecotoxicity by 10% and 13%, respectively. In Low H₂S situation, dosing ferric chloride performs even worse for all impact categories. Therefore, from an LCA perspective, this study recommends iron salts dosing technology to be applied in severe corrosion conditions caused by high H₂S concentrations. Contribution analysis shows that asphalt and diesel consumed during the sewer construction and renovation dominate all impact categories for non-dosing option, whereas the main contributor of Human Toxicity and Freshwater Ecotoxicity is shifted to ferric chloride production in dosing option, average at around 50%. Sensitivity analysis on the length of pipes protected by iron salts confirms that the initial dosing location is more preferable to be set at upstream of the sewer system. From an LCA perspective, as alternatives to ferric chloride, ferrous chloride is superior in all impact categories, and ferric sulfate could reduce the toxicity-related impacts and other effects at the expense of exacerbation of acidification. In the end, a systematic optimization of salts dosing should be considered in urban sewer management practice.