Urease-Immobilized Magnetic Graphene Oxide as a Safe and Effective Urea Removal Recyclable Nanocatalyst for Blood Purification

Immobilized Urease Vector System Based on the Dynamic Defect Regeneration Strategy for Efficient Urea Removal

The clearance of urea poses a formidable challenge, and its excessive accumulation can cause various renal diseases. Urease demonstrates remarkable efficacy in eliminating urea, but cannot be reused. This study aimed to develop a composite vector system comprising microcrystalline cellulose (MCC) immobilized with urease and metal-organic framework (MOF) UiO-66-NH2, denoted as MCC@UiO/U, through the dynamic defect generation strategy. By utilizing competitive coordination, effective immobilization of urease into MCC@UiO was achieved for efficient urea removal. Within 2 h, the urea removal efficiency could reach up to 1500 mg/g, surpassing an 80% clearance rate. Furthermore, an 80% clearance rate can also be attained in peritoneal dialyzate from patients. MCC@UiO/U also exhibits an exceptional bioactivity even after undergoing 5 cycles of perfusion, demonstrating remarkable stability and biocompatibility. This innovative approach and methodology provide a novel avenue and a wide range of immobilized enzyme vectors for clinical urea removal and treatment of kidney diseases, presenting immense potential for future clinical applications.

Removal of urea in ultrapure water system by urease-coated reverse osmosis membrane

Among the various substances found in the feed source for the production of ultrapure water (UPW), urea is challenging to remove because it is a small molecular weight molecule that is not easily oxidized and does not carry a charge under neutral pH conditions. Urease enzyme, found in various organisms such as plants and bacteria, catalyze the hydrolysis of urea into carbon dioxide and ammonia. In this study, urease was immobilized on the polyamide layer of a reverse osmosis (RO) membrane to remove urea in UPW systems. The removal efficiency of urea by urease-coated RO membrane showed up to 27.9 % higher urea removal efficiency compared to the pristine membrane. This increase in urea removal can be attributed to both physical and biological effects from the urease coating on the membrane. Firstly, urease on the membrane surface can act as an additional physical barrier for urea to pass through. Secondly, urea can be hydrolyzed by the enzyme when it passes through the urease-coated RO membrane. In a two-pass RO system typical for UPW production, the removal of urea by a urease-coated membrane would be enhanced by twofold. This overall method can significantly increase the removal efficiency of urea in UPW systems, especially when considering the compounded removal by the urease coating, rejection by RO, and additional reactions by other treatment processes. Moreover, urea in UPW systems can be removed without the installment of additional processes by simply coating urease on the existing RO membranes.

Bio-inspired self-pumping microfluidic device for cleaning of urea using reduced graphene oxide (rGO) modified polymeric nanohybrid membrane

In vitro technology facilitates the replication of in vivo tissues more accurately than conventional cell-based artificial organs, enabling researchers to mimic both the structural and functional characteristics of natural systems. Here, we demonstrate a novel spiral-shaped self-pumping microfluidic device for the cleaning of urea by incorporating reduced graphene oxide (rGO) modified a Polyethersulfone (PES) nanohybrid membrane for efficient filtration capacity. The spiral-shaped microfluidic chip is a two-layer configuration of polymethyl methacrylate (PMMA) integrated with the modified filtration membrane. In essence, the device replicates the main features of the kidney (Glomerulus), i.e., a nano-porous membrane modified with reduced graphene oxide to separate the sample fluid from the upper layer and collect the biomolecule-free fluid through the bottom of the device. We have achieved a cleaning efficiency of 97.94 ± 0.6 % using this spiral shaped microfluidic system. The spiral-shaped microfluidic device integrated with nanohybrid membrane has potential for organ-on-a-chips applications.

Effects of microsize on the biocompatibility of UiO67 from protein-adsorption behavior, hemocompatibility, and histological toxicity

The biocompatibility of metal-organic frameworks (MOFs) is necessary to humans but is far from being sufficiently addressed. This study focused on the effects of microsize on the biocompatibility of MOFs by selecting UiO67 with micron and submicron size as the MOFs models. Under the dose metric of surface area, the binding constant between UiO67 and human serum albumin (HSA) gradually increased with increased UiO67 size. Submicron UiO67 induced stronger conformational transformation and more greatly affected the protein surface hydrophobicity than micron UiO67. Micron UiO67 also inhibited the esterase-like activity of HSA through competitive inhibition mechanism, whereas submicron UiO67 inhibited it through noncompetitive inhibition mechanism. The size of UiO67 had little effect on hemocompatibility. A smaller size of UiO67, corresponded with a higher IC50 value for 293 T and LO2 cells, and the adsorption of HSA can effectively improve cytotoxicity. In vivo toxicity evaluations revealed that all UiO67 did not cause obvious distortion of organs, and they were metabolized primarily in the kidney. These results provided useful information about the toxicity of MOFs and experimental references for the development of MOFs-based engineering materials.

Amphiphilic shell nanomagnetic adsorbents for selective and highly efficient capture of low-density lipoprotein from hyperlipidaemia serum

Removal of low-density lipoprotein (LDL) from hyperlipemia patients’ blood represents an effective approach to prevent the progression of atherosclerotic cardiovascular disease. Based on the LDL structural characteristics and intermolecular interactions,...

Hierarchical core-shell nanoplatforms constructed from Fe3O4@C and metal-organic frameworks with excellent bilirubin removal performance

Hemoperfusion has become the third-generation treatment strategy for patients suffering from hyperbilirubinemia, but adsorbents used for bilirubin removal mostly face intractable problems, such as unsatisfactory adsorption performance and poor hemocompatibility. Metal-organic frameworks (MOFs) are promising adsorbents for hemoperfusion due to their high specific surface areas and easily modified organic ligands. However, their microporous properties and separation have hampered their application. Here, a novel hierarchical core-shell nanoplatform (named Double-PEG) with tailored binding sites and pore sizes based on Fe3O4@C and Uio66-NH2 was constructed. Notably, Double-PEG showed excellent bilirubin uptake of up to 1738.30 mg g-1 and maintained excellent bilirubin removal efficiency in simulated biological solutions. A study on the adsorption mechanism showed that the adsorption of Double-PEG towards bilirubin tended to be chemical adsorption and in accordance with the Langmuir model. Besides, the good separability, recyclability, cytotoxicity and hemocompatibility of Double-PEG show great potential in hemoperfusion therapy. The finding of this study may provide a novel insight into the application of MOF materials in the field of hemoperfusion.

Performance Evaluation and Fouling Propensity of Forward Osmosis (FO) Membrane for Reuse of Spent Dialysate

The number of chronic renal disease patients has shown a significant increase in recent decades over the globe. Hemodialysis is the most commonly used treatment for renal replacement therapy (RRT) and dominates the global dialysis market. As one of the most water-consuming treatments in medical procedures, hemodialysis has room for improvement in reducing wastewater effluent. In this study, we investigated the technological feasibility of introducing the forward osmosis (FO) process for spent dialysate reuse. A 30 LMH of average water flux has been achieved using a commercial TFC membrane with high water permeability and salt removal. The water flux increased up to 23% with increasing flowrate from 100 mL/min to 500 mL/min. During 1 h spent dialysate treatment, the active layer facing feed solution (AL-FS) mode showed relatively higher flux stability with a 4–6 LMH of water flux reduction while the water flux decreased significantly at the active layer facing draw solution (AL-DS) mode with a 10–12 LMH reduction. In the pressure-assisted forward osmosis (PAFO) condition, high reverse salt flux was observed due to membrane deformation. During the membrane filtration process, scaling occurred due to the influence of polyvalent ions remaining on the membrane surface. Membrane fouling exacerbated the flux and was mainly caused by organic substances such as urea and creatinine. The results of this experiment provide an important basis for future research as a preliminary experiment for the introduction of the FO technique to hemodialysis.