Simultaneously Grafting Poly(lactic acid) (PLLA) and Polyethylene (PE) Chains onto a Reactive SG Copolymer: Formation of Supertough PLLA/PE Blends by Reactive Processing

Fabrication of antibacterial poly (L-lactic acid)/tea polyphenol blend films via reactive blending using SG copolymer

Poly (L-lactic acid) (PLLA) composite materials with both excellent antibacterial properties and mechanical properties are highly desirable for both food packaging and biomedical applications. However, a facile method to prepare transparent PLLA composite films with both excellent antibacterial and mechanical properties is still lacking. In this work, blend films based on PLLA, tea polyphenols (TP) and poly (styrene-co-glycidyl methacrylate) (SG) copolymers (PLLA/TP/SG) were prepared by melt blending using twin screw extruder. The blend films showed high transparency with a brownish color originated from tea polyphenols. Both SEM and DSC analyses confirmed that the blends are thermodynamically compatible. GPC and mechanical assessments demonstrated that the PLLA/TP binary blends exhibit reduced molecular weight and compromised mechanical properties, compared to neat PLLA. However, incorporating SG copolymer resulted in increased molecular weight and improved mechanical properties for the PLLA/TP/SG blends. The FT-IR spectra exhibited a shift to lower wavenumber for the absorption peak associated with the benzene ring on TPs after blending with PLLA and SG, indicating the occurrence of transesterification between PLLA and TP. Plate coating studies revealed that the PLLA/TP/SG blends with TP incorporation at 5 wt% exhibited a bacteriostatic rate of 99.99 % against Staphylococcus aureus and Escherichia coli. Overall, our study reveals that the PLLA/TP/SG blend films exhibit excellent antibacterial properties coupled with good mechanical properties, rendering them a promising candidate for antibacterial packaging materials.

In-situ self-crosslinking strategy for super-tough polylactic acid/ bio-based polyurethane blends

As a bio-based degradable plastic, polylactic acid (PLA) is highly commercialized, but its inherent brittleness limits its widespread use. In-situ polymerization techniques are effective in improving the toughness of PLA. However, the enhancement of the toughening effect in polyurethanes (PUs) through in-situ self-crosslinking still requires improvement and heavily relies on petroleum-derived feedstocks in certain approaches. In this paper, 1,3-polypropanediol (PO3G) of bio-based origin rather than conventional polyols like polyethylene glycol (PEG) and poly propylene glycol (PPG) was used. PLA/PO3G-PU blends were prepared via an in-situ self-crosslinking strategy. With a notch impact and tensile strength of 55.95 kJ/m2 and 47.77 MPa (a retention rate of 68.9 % compared with pure PLA), respectively, PLA/PO3G-PU blends achieved a better balance between stiffness and toughness. This work provides a new option for PLA to achieve a stiffness-toughness balance and get rid of dependence on petrochemical resources.

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Poly (lactic acid) (PLA) with branched structure has abundant terminal groups, high melt strength, good rheological properties, and excellent processability; it is a new research and application direction of PLA materials. This study mainly summarizes the molecular structure design, preparation methods, basic properties of branched PLA, and its application in modified PLA materials. The structure and properties of branched PLA prepared by ring-opening polymerization of monomer, functional group polycondensation, and chain extender in the processing process were introduced. The research progress of in situ formation of branched PLA by initiators, multifunctional monomers/additives through dynamic vulcanization, and irradiation induction was described. The effect of branched PLA on the structure and properties of linear PLA materials was analyzed. The role of branched PLA in improving the crystallization behavior, phase morphology, foaming properties, and mechanical properties of linear PLA materials was discussed. At the same time, its research progress in biomedicine and tissue engineering was analyzed. Branched PLA has excellent compatibility with PLA, which has important research value in regulating the structure and properties of PLA materials.

Toughening Modification of Polylactic Acid by Thermoplastic Silicone Polyurethane Elastomer

The melt blending of polylactic acid (PLA) and thermoplastic silicone polyurethane (TPSiU) elastomer was performed to toughen PLA. The molecular structure, crystallization, thermal properties, compatibility, mechanical properties and rheological properties of the PLA/TPSiU blends of different mass ratios (100/0, 95/5, 90/10, 85/15 and 80/20) were investigated. The results showed that TPSiU was effectively blended into PLA, but no chemical reaction occurred. The addition of TPSiU had no obvious effect on the glass transition temperature and melting temperature of PLA, but slightly reduced the crystallinity of PLA. The morphology and dynamic mechanical analysis results demonstrated the poor thermodynamic compatibility between PLA and TPSiU. Rheological behavior studies showed that PLA/TPSiU melt was typically pseudoplastic fluid. As the content of TPSiU increased, the apparent viscosity of PLA/TPSiU blends showed a trend of rising first and then falling. The addition of TPSiU had a significant effect on the mechanical properties of PLA/TPSiU blends. When the content of TPSiU was 15 wt%, the elongation at break of the PLA/TPSiU blend reached 22.3% (5.0 times that of pure PLA), and the impact strength reached 19.3 kJ/m2 (4.9 times that of pure PLA), suggesting the favorable toughening effect.

Post-chemical grafting poly(methyl methacrylate) to commercially renewable elastomer as effective modifiers for polylactide blends

A novel poly(epichlorohydrin-co-ethylene oxide)-g-poly(methyl methacrylate) copolymer (ECO-g-PMMA) was successfully synthesized from a commercially renewable elastomer via the ATRP method. The graft copolymer was investigated as a toughening agent and compatibilizer for polylactide (PLA) and PLA/ECO blends, respectively. Binary blending PLA with the copolymers (5-15 wt%) significantly improved the strain at break of PLA above 200% without a great strength loss. More importantly, the ternary PLA/ECO/ECO-g-PMMA copolymer blends exhibited a remarkably high impact strength of 96.9 kJ/m² with non-broken behaviors. An interesting phase structure transformation from a typical sea-island structure to a unique quasi-continuous network structure was observed with varying the content of ECO-g-PMMA from 0 to 15 wt% in the ternary blends. The native toughening mechanism analysis indicated the synergistic toughening effect of the good interfacial adhesion and unique quasi-continuous morphology endowed the ternary blends with excellent mechanical performance.

Toughening Polylactic Acid by a Biobased Poly(Butylene 2,5-Furandicarboxylate)-b-Poly(Ethylene Glycol) Copolymer: Balanced Mechanical Properties and Potential Biodegradability

Polylactic acid (PLA) is a biodegradable thermoplastic polyester produced from natural resources. Because of its brittleness, many tougheners have been developed. However, traditional toughening methods cause either the loss of modulus and strength or the lack of degradability. In this work, we synthesized a biobased and potentially biodegradable poly(butylene 2,5-furandicarboxylate)-b-poly(ethylene glycol) (PBFEG50) copolymer to toughen PLA, with the purpose of both keeping mechanical strength and enhancing the toughness. The blend containing 5 wt % PBFEG50 exhibited about 28.5 times increase in elongation at break (5.5% vs 156.5%). At the same time, the tensile modulus even strikingly increased by 21.6% while the tensile strength was seldom deteriorated. Such a phenomenon could be explained by the stretch-induced crystallization of the BF segment and the interconnected morphology of PBFEG50 domains in PLA5. The Raman spectrum was used to identify the phase dispersion of PLA and PBFEG50 phases. As the PBFEG50 content increased, the interconnected PBFEG50 domains start to separate, but their size increases. Interestingly, tensile-induced cavitation could be clearly identified in scanning electron microscopy images, which meant that the miscibility between PLA and PBFEG50 was limited. The crystallization of PLA/PBFEG50 blends was examined by differential scanning calorimetry, and the plasticizer effect of the EG segment on the PLA matrix could be confirmed. The rheological experiment revealed decreased viscosity of PLA/PBFEG50 blends, implying the possible greener processing. Finally, potential biodegradability of these blends was proved.