Structure Color Tuners of Cholesteric Cellulose Nanocrystal

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Macroscopic Spiral Patterns of Cholesteric Cellulose Nanocrystals Induced by Chiral Doping and Vortex Flowing

Negatively surface-charged sulfate cellulose nanocrystals (CNCs) are always slowly self-assembled into left-handed cholesteric mesophases. In this work, macroscopic spiral patterns induced by counterclockwise vortex flowing or chiral doping were investigated. Results show that iridescent patterns of the arithmetic spiral, rose spiral, or latitude ripples were generated under the vortex rotation, indicating a severe microphase separation of CNCs. Moreover, the spiral pattern and rotational symmetry were highly correlated to the twisting and flowability of CNCs as well as chiral dopants. Alternatively, the cholesteric pitch and maximum reflective wavelength (λ_max) of CNCs were strongly increased by sinistral dopants other than the dextral ones, indicating an enhanced torsion of left-handed CNC mesophases by the dextral dopants. In addition, macroscopic spiral patterns distinctly existed in dextrally doped CNCs owing to a synergistic chiral enhancement. Therefore, the mechanochiral or chemical chiral transition from microscopic twisting to macroscopic spiral provides a potential inspiration for chiral self-organization of biological macromolecules.

Design of experiments to investigate multi-additive cellulose nanocrystal films

Cellulose nanocrystal (CNC) suspensions can self-assemble into chiral nematic films upon the slow evaporation of water. These films are brittle, as indicated by their fracturing instead of plastically deforming once they are fully elastically deformed. This aspect can be mediated to some extent by plasticizing additives, such as glucose and glycerol, however, few reports consider more than one additive at a time or address the influence of additive content on the homogeneity of the self-assembled structure. In this work, design of experiments (DoE) was used to empirically model complex film compositions, attempting to relate additive concentrations in dilute suspension to film properties, and to understand whether outcome specific predictions are possible using this approach. We demonstrate that DoE can be used to predict film properties in multi-additive systems, without consideration given to the different phenomena that occur along the drying process or to the nature of the additives. Additionally, a homogeneity metric is introduced in relation to chiral nematic organization in CNC films, with most of the additive-containing compositions in this work found to reduce the homogeneity of the self-assembly relative to pure CNC films.

A Surface Diffusion Barrier Strategy toward Water-Resistant Photonic Materials for Accurate Detection of Ethanol

Photonic materials that enable visual detection of chemicals have shown great potential for wide applications in chemical, environmental, biotechnological, and food industries, but until now, using hydrophilic photonic materials for tracing water-soluble chemicals remains a major challenge due to the strong water interference. Here, we demonstrate a two-step co-assembly and subsequent surface coating strategy to develop an ethanol-sensitive and anti-water interference photonic crystal film. By using citric acid as a co-assembly phase, high ethanol sensing is realized because of the strong intermolecular affinity. By controlling the thickness of the outer polyvinyl butyral layer, selective ethanol penetration but a water barrier is enabled. Notably, the composite photonic films are free-standing, highly flexible, and controllably structurally colored. We further present using the composite film to quantitatively trace ethanol/water mixtures and potentially track drunk driving as a colorimetric sensor. The heuristic two-step modification strategy proposed in this work not only overcomes the limitation of water interference for hydrophilic colorimetric sensors but also provides references to develop more new photonic materials with water resistance that need to be applied in water/humid environments.

Sustainable iridescence of cast and shear coatings of cellulose nanocrystals

As an eco-friendly sustainable iridescent coating, cholesteric cellulose nanocrystal (CNC) is susceptible to substrate effects or shearing effects. In this work, interface interaction and liquid crystal phase transition were evaluated for fabricating iridescent cast or shear coatings of CNCs onto substrates of polystyrene, glass, ceramic, wood, stainless steel, metal, or metal alloy. Three types of substrate effects and four categories of shearing effects on the structure color mechanism of CNC coatings were proposed. Practically, several efficient approaches, such as increasing colloidal concentration, enhancing water-retention of substrates, raising processing temperature, slowing down shearing speed, or doping functional additives were involved. Hence, a feasible strategy was provided for preparing sustainable, iridescent, stable, and industrially scalable coatings of CNCs.