Conditions for the Joint Conversion of CO2 and Syngas in the Direct Synthesis of Light Olefins Using In2O3–ZrO2/SAPO-34 Catalyst

Kinetic Model for the Direct Conversion of CO2/CO into Light Olefins over an In2O3-ZrO2/SAPO-34 Tandem Catalyst

An original kinetic model is proposed for the direct production of light olefins by hydrogenation of CO2/CO (COx) mixtures over an In2O3-ZrO2/SAPO-34 tandem catalyst, quantifying deactivation by coke. The reaction network comprises 12 individual reactions, and deactivation is quantified with expressions dependent on the concentration of methanol (as coke precursor) and H2O and H2 (as agents attenuating coke formation). The experimental results were obtained in a fixed-bed reactor under the following conditions: In2O3-ZrO2/SAPO-34 mass ratio, 0/1-1/0; 350-425 °C; 20-50 bar; H2/COx ratio, 1-3; CO2/COx ratio, 0-1; space time, 0-10 gIn2O3-ZrO2 h molC-1, 0-20 gSAPO-34 h molC-1; time, up to 500 h; H2O and CH3OH in the feed, up to 5% vol. The utility of the model for further scale-up studies is demonstrated by its application in optimizing the process variables (temperature, pressure, and CO2/COx ratio). The model predicts an olefin yield higher than 7% (selectivity above 60%), a COx conversion of 12% and a CO2 conversion of 16% at 415 °C and 50 bar, for a CO2/COx = 0.5 in the feed. Additionally, an analysis of the effect of In2O3-ZrO2 and SAPO-34 loading in the configuration of the tandem catalyst is conducted, yielding 17% olefins and complete conversion of CO2 under full water removal conditions.

Effective synergies in indium oxide loaded with zirconia mixed with silicoaluminophosphate molecular sieve number 34 catalysts for carbon dioxide hydrogenation to lower olefins

Tandem catalysts consisting of metal oxides and zeolites have been widely studied for catalytic carbon dioxide (CO₂) hydrogenation to lower olefins, while the synergies of two components and their influence on the catalytic performance are still unclear. In this study, the composite catalysts composed of indium oxide loaded with zirconia (In₂O₃/ZrO₂) and silicoaluminophosphate molecular sieve number 34 (SAPO-34) are developed. Performance results indicate that the synergies between these two components can promote CO₂ hydrogenation. Further characterizations reveal that the chabazite (CHA) structure and acid sites in the SAPO-34 are destroyed when preparing In-Zr/SAPO by powder milling (In-Zr/SAPO-M) because of the excessive proximity of two components, which inhibits the activation of CO₂ and hydrogen (H₂), thus resulting in much higher methane selectivity than the catalysts prepared by granule stacking (In-Zr/SAPO-G). Proper granule integration manner promotes tandem reaction, thus enhancing CO₂ hydrogenation to lower olefins, which can provide a practicable strategy to improve catalytic performance and the selectivity of the target products.

A Review on Green Hydrogen Valorization by Heterogeneous Catalytic Hydrogenation of Captured CO2 into Value-Added Products

The catalytic hydrogenation of captured CO2 by different industrial processes allows obtaining liquid biofuels and some chemical products that not only present the interest of being obtained from a very low-cost raw material (CO2) that indeed constitutes an environmental pollution problem but also constitute an energy vector, which can facilitate the storage and transport of very diverse renewable energies. Thus, the combined use of green H2 and captured CO2 to obtain chemical products and biofuels has become attractive for different processes such as power-to-liquids (P2L) and power-to-gas (P2G), which use any renewable power to convert carbon dioxide and water into value-added, synthetic renewable E-fuels and renewable platform molecules, also contributing in an important way to CO2 mitigation. In this regard, there has been an extraordinary increase in the study of supported metal catalysts capable of converting CO2 into synthetic natural gas, according to the Sabatier reaction, or in dimethyl ether, as in power-to-gas processes, as well as in liquid hydrocarbons by the Fischer-Tropsch process, and especially in producing methanol by P2L processes. As a result, the current review aims to provide an overall picture of the most recent research, focusing on the last five years, when research in this field has increased dramatically.