Iron Oxide as a Catalyst for Nitroarene Hydrogenation: Important Role of Oxygen Vacancies

Modifying the Substrate-Dependent Pd/Fe2O3 Catalyst-Support Synergism with ZnO Atomic Layer Deposition

Low-loading Pd supported on Fe2O3 nanoparticles was synthesized. A common nanocatalyst system with previously reported synergistic enhancement of reactivity that is attributed to the electronic interactions between Pd and the Fe2O3 support. Fe2O3-selective precoalescence overcoating with ZnO atomic layer deposition (ALD), using Zn(CH2CH3)2 and H2O as precursors, dampens competitive hydrogenation reactivity at Fe2O3-based sites. The result is enhanced efficiency at the low-loading but high reactivity Pd sites. While this increases catalyst efficiency toward most aqueous redox reactions tested, it suppresses reactivity toward polyaromatic core substrates. X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) show minimal electronic impacts for the ZnO overcoat on the Pd particles, implying a predominantly physical site blocking effect as the reason for the modified reactivity. This serves as a proof-of-concept of not only stabilizing supported nanocatalysts but also altering reactivity with ultrathin ALD overcoats. The results point to a facile ALD route for selective enhancement of reactivity for low-loading Pd-based supported nanocatalysts.

Facile Transfer Hydrogenation of N-Heteroarenes and Nitroarenes Using Magnetically Recoverable Pd@SPIONs Catalyst

Catalysts with active, selective, and reusable features are desirable for sustainable development. The present investigation involved the synthesis and characterization of bear-surfaced ultrasmall Pd particles (<1 nm) loaded onto the surface of magnetic nanoparticles (8-10 nm). The amount of Pd loading onto the surface of magnetite is recorded as 2.8 wt %. The characterization process covered the utilization of scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), inductively coupled plasma (ICP), and X-ray photoelectron spectroscopy (XPS) methods. The Pd@Fe3O4 catalyst has shown remarkable efficacy in the hydrogenation of quinoline, resulting in the production of >99% N-ring hydrogenated (py-THQ) product. Additionally, the catalyst facilitated the conversion of nitroarenes into their corresponding aniline derivatives, where hydrogen was achieved by H2O molecules with the aid of tetrahydroxydiboron (THDB) as an equilibrium supportive at 80 °C in 1 h. The high efficiency of a transfer hydrogenation catalyst is closely related to the metal-support synergistic effect. The broader scope of functional group tolerance is evaluated. The potential mechanism underlying the hydrogenation process has been elucidated through the utilization of isotopic labeling investigations. The application of the heterocyclic compound hydrogenation reaction is extended to formulate the medicinally important tubular polymerization inhibitor drug synthesis. The investigation of the recyclability of Pd@Fe3O4 has been conducted.

Iron-Based Catalysts with Oxygen Vacancies Obtained by Facile Pyrolysis for Selective Hydrogenation of Nitrobenzene

The development of preparation strategies for iron-based catalysts with prominent catalytic activity, stability, and cost effectiveness is greatly significant for the field of catalytic hydrogenation but still remains challenging. Herein, a method for the preparation of iron-based catalysts by the simple pyrolysis of organometallic coordination polymers is described. The catalyst Fe@C-2 with sufficient oxygen vacancies obtained in specific coordination environment exhibited superior nitro hydrogenation performance, acid resistance, and reaction stability. Through solvent effect experiments, toxicity experiments, TPSR, and DFT calculations, it was determined that the superior activity of the catalyst was derived from the contribution of sufficient oxygen vacancies to hydrogen activation and the good adsorption ability of FeO on substrate molecules.

New Barrier Role of Iron Plaque: Producing Interfacial Hydroxyl Radicals to Degrade Rhizosphere Pollutants

Iron plaque, as a natural barrier between rice and soil, can reduce the accumulation of pollutants in rice by adsorption, contributing to the safe production of rice in contaminated soil. In this study, we unveiled a new role of iron plaque, i.e., producing hydroxyl radicals (·OH) by activating root-secreted oxygen to degrade pollutants. The ·OH was produced on the iron plaque surface and then diffused to the interfacial layer between the surface and the rhizosphere environment. The iron plaque activated oxygen via a successive three-electron transfer to produce ·OH, involving superoxide and hydrogen peroxide as the intermediates. The structural Fe(II) in iron plaque played a dominant role in activating oxygen rather than the adsorbed Fe(II), since the structural Fe(II) was thermodynamically more favorable for oxygen activation. The oxygen vacancies accompanied by the structural Fe(II) played an important role in oxygen activation to produce ·OH. The interfacial ·OH selectively degraded rhizosphere pollutants that could be adsorbed onto the iron plaque and was less affected by the rhizosphere environments than the free ·OH. This study uncovered the oxidative role of iron plaque mediated by its produced ·OH, reshaping our understanding of the role of iron plaque as a barrier for rice.

Revealing the Excellent Low-Temperature Activity of the Fe1-xCexOδ-S Catalyst for NH3-SCR: Improvement of the Lattice Oxygen Mobility

The development of selective catalytic reduction catalysts by NH₃(NH₃-SCR) with excellent low-temperature activity and a wide temperature window is highly demanded but is still very challenging for the elimination of NO_x emission from vehicle exhaust. Herein, a series of sulfated modified iron-cerium composite oxide Fe_1-xCe_xO_δ-S catalysts were synthesized. Among them, the Fe_0.79Ce_0.21O_δ-S catalyst achieved the highest NO_x conversion of more than 80% at temperatures of 175-375 °C under a gas hourly space velocity of 100000 h^-1. Sulfation formed a large amount of sulfate on the surface of the catalyst and provided rich Brønsted acid sites, thus enhancing its NH₃ adsorption capacity and improving the overall NO_x conversion efficiency. The introduction of Ce is the main determining factor in regulating the low-temperature activity of the catalyst by modulating its redox ability. Further investigation found that there is a strong interaction between Fe and Ce, which changed the electron density around the Fe ions in the Fe_0.79Ce_0.21O_δ-S catalyst. This weakened the strength of the Fe-O bond and improved the lattice oxygen mobility of the catalyst. During the reaction, the iron-cerium composite oxide catalyst showed higher surface lattice oxygen activity and a faster replenishment rate of bulk lattice oxygen. This significantly improved the adsorption and activation of NO_x species and the activation of NH₃ species on the catalyst surface, thus leading to the superior low-temperature activity of the catalyst.

Effect of Different Iron Phases of Fe/SiO2 Catalyst in CO2 Hydrogenation under Mild Conditions

The effect of different active phases of Fe/SiO2 catalyst on the physio-chemical properties and the catalytic performance in CO2 hydrogenation under mild conditions (at 220 °C under an ambient pressure) was comprehensively studied in this work. The Fe/SiO2 catalyst was prepared by an incipient wetness impregnation method. Hematite (Fe2O3) in the calcined Fe/SiO2 catalyst was activated by hydrogen, carbon monoxide, and hydrogen followed by carbon monoxide, to form a metallic iron (Fe/SiO2-h), an iron carbide (Fe/SiO2-c), and a combination of a metallic iron and an iron carbide (Fe/SiO2-hc), respectively. All activated catalysts were characterized by XRD, Raman spectroscopy, N2 adsorption–desorption, H2-TPR, CO-TPR, H2-TPD, CO2-TPD, CO-TPD, NH3-TPD, and tested in a CO2 hydrogenation reaction. The different phases of the Fe/SiO2 catalyst are formed by different activation procedures and different reducing agents (H2 and CO). Among three different activated catalysts, the Fe/SiO2-c provides the highest CO2 hydrogenation performance in terms of maximum CO2 conversion, as well as the greatest selectivity toward long-chain hydrocarbon products, with the highest chain growth probability of 0.7. This is owing to a better CO2 and CO adsorption ability and a greater acidity on the carbide form of the Fe/SiO2-c surface, which are essential properties of catalysts for polymerization in FTs.

Appropriate aggregation is needed for highly active Pt/Al2O3 to enable hydrogenation of chlorinated nitrobenzene

The atomic dispersion of a noble metal with a reducible support has been reported to be beneficial for catalytic hydrogenation reactions. Conversely, we found that Pt particles (3-5 nm) could be obtained on the non-reducible support Al₂O₃ by weakening the interaction between the metal and support using oleic acid, and the turnover frequency of catalyzing the hydrogenation of chlorinated nitrobenzene could reach 3700 h^-1, which is three orders of magnitude higher than that of atomic platinum species.

Urchin-like hybrid nanostructures of CuOx/Fe2O3 from Cu-mediated pyrolysis of Fe-MOFs for catalytic reduction of organic pollutants

MOFs have been widely used as templates to design and construct catalysis materials, such as LDH, metal oxides, and carbon. Herein, we developed a Cu-mediated pyrolysis protocol for the synthesis of urchin-like CuO_x/Fe₂O₃ hybrid nanostructures using Fe-MOFs as the precursor. The hierarchical hybrids were composed of an inner CuO_x-dispersed Fe₂O₃ octahedral matrix covered with radially grown Fe₂O₃ nanorods. This novel hierarchical hybrid nanostructure was generated likely due to the difference in the inward contraction rates between the Cu and Fe species during pyrolysis. Given the structural and compositional benefits, the urchin-like CuO_x/Fe₂O₃ hybrids exhibited outstanding catalytic activity for the chemical reduction of 4-nitrophenol (4-NP) and dyes. Besides, CuO_x/Fe₂O₃ was found to be highly catalytic in the reduction of 4-NP even after 30 consecutive runs, manifesting outstanding durability for continuous operation.

Enhanced high temperature ferromagnetism in Bi1-xRxFeO3(R= Dy, Y) compounds

In this work we report experimental evidence for the weak high-temperature ferromagnetism in Bi1-xRxFeO3(R= Dy, Y) compounds by systematic characterizations, excluding the possible side-effects from other iron-based impurities. Remarkable saturated magnetic moment was observed in the Y-substituted samples, Bi1-xYxFeO3, which is larger than the moment obtained in Bi1-xDyxFeO3, the Dy-substituted samples with antiferromagnetic background. The physical origin of the weak ferromagnetic transition is discussed and serious lattice distortions have been identified based on the x-ray diffraction and Raman scattering data, although the rhombohedral structure symmetry remains unchanged upon the substitutions. It is believed that the structural distortion suppressed cycloid spin structure is the main factor for the enhanced magnetization in Bi1-xRxFeO3compounds. Additionally, the Dy3+-Fe3+antiferromagnetic coupling, which strengthens the antiferromagnetic interaction in Bi1-xDyxFeO3compounds, acts as the driving force for the magnetic discrepancy between Bi1-xYxFeO3and Bi1-xDyxFeO3samples.

Heterogeneous iron-containing nanocatalysts – promising systems for selective hydrogenation and hydrogenolysis

Bimetallic catalytic systems Fe–Me (Pt, Pd, Cu) demonstrate synergy in the activity/selectivity pattern in reactions involving hydrogen: selective hydrogenation of CC bonds, NO₂ and carbonyl groups and hydrogenolysis of C–O bonds.

Structure-Activity Relationship of Defective Metal-Based Photocatalysts for Water Splitting: Experimental and Theoretical Perspectives

Photocatalytic water splitting is promising for hydrogen energy production using solar energy and developing highly efficient photocatalysts is challenging. Defect engineering is proved to be a very useful strategy to promote the photocatalytic performance of metal-based photocatalysts, however, the vital role of defects is still ambiguous. This work comprehensively reviews point defective metal-based photocatalysts for water splitting, focusing on understanding the defects' disorder effect on optical adsorption, charge separation and migration, and surface reaction. The controllable synthesis and tuning strategies of defective structure to improve the photocatalytic performance are summarized, then the characterization techniques and density functional theory calculations are discussed to unveil the defect structure, and analyze the defects induced electronic structure change of catalysts and its ultimate effect on the photocatalytic activity at the molecular level. Finally, the challenge in developing more efficient defective metal-based photocatalysts is outlined. This work may help further the understanding of the fundamental role of defect structure in the photocatalytic reaction process and guide the rational design and fabrication of highly efficient and low-cost photocatalysts.

Highly dispersed γ-Fe2O3 embedded in nitrogen doped carbon for the efficient oxygen reduction reaction

A sacrificial template strategy is developed to synthesize highly dispersed γ-Fe₂O₃ embedded in porous N-doped carbon. The as-synthesized catalyst exhibits high ORR performance and presents a power density of 112 mW cm⁻² in zinc–air battery.

Reduction of Nitro Compounds Using 3d-Non-Noble Metal Catalysts

The reduction of nitro compounds to the corresponding amines is one of the most utilized catalytic processes in the fine and bulk chemical industry. The latest development of catalysts with cheap metals like Fe, Co, Ni, and Cu has led to their tremendous achievements over the last years prompting their greater application as "standard" catalysts. In this review, we will comprehensively discuss the use of homogeneous and heterogeneous catalysts based on non-noble 3d-metals for the reduction of nitro compounds using various reductants. The different systems will be revised considering both the catalytic performances and synthetic aspects highlighting also their advantages and disadvantages.

Novel Prussian-blue-analogue microcuboid assemblies and their derived catalytic performance for effective reduction of 4-nitrophenol

Novel Co–Fe PBA microcuboids (MCBs) were solvothermally synthesized in the presence of PVP for the first time, and the cuboid-derived catalyst, CoFe/NC-MCBs, showed excellent catalytic performance for the reduction of 4-nitrophenol.