Experimental and Theoretical Thermodynamic Study of Distillable Ionic Liquid 1,5-Diazabicyclo[4.3.0]non-5-enium Acetate

One-pot chitin pulping using recyclable superbase-based protic ionic liquid

The application of ionic liquids and deep eutectic solvents offers a promising opportunity for a more environmentally friendly and straightforward chitin purification process from crustacean shells. Nonetheless, the insufficient recyclability of these ionic solvents poses a challenge to the long-term sustainability of such extraction methods. Thus, there is a strong imperative to focus on employing easily recyclable ionic liquids for chitin isolation, enhancing the overall sustainability of the process. In this investigation, a direct chitin purification procedure that utilized pulping liquors consisting of the superbase-based protic ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate and its precursor, acetic acid, was developed. It was demonstrated that these pulping liquors were capable of simultaneously deproteinate and demineralize shrimp shells to generate chitins with higher purity, degree of N-acetylation and crystallinity than commercially obtained chitin. More significantly, the pulping liquors can be recycled to their pure form in high quantity by simple distillation under reduced pressure, allowing the reuse of these mixtures, which give chitin of nearly identical purity.

Optimization and degradation studies of cellulose transesterification to palmitate esters in superbase ionic liquid

Cellulose palmitates (CPs) were synthesized with varying degrees of substitution (DS) via a catalyst-free, homogeneous transesterification of cellulose in a novel superbase ionic liquid (SB-IL) system, specifically 5-methyl-1,5,7-triaza-bicyclo[4.3.0]non-6-enium acetate [mTBNH][OAc], combined with dimethyl sulfoxide (DMSO) as a co-solvent, using vinyl palmitate as the acylating agent. We examined the influence of reaction temperature, reaction time, and the molar ratio of vinyl palmitate to anhydroglucose unit (AGU) on the DS, which ranged from 0.5 to 2.3 under the given conditions. Notably, the reaction order of the three hydroxy groups was C6-OH > C2-OH > C3-OH. To elucidate the chemical structure of CPs and confirm the transesterification process, various spectroscopic techniques including 1H nuclear magnetic resonance (NMR), 13C NMR, heteronuclear single quantum correlation (HSQC), and solid-state NMR were employed. Higher reaction temperatures and extended reaction times led to a decrease in the DS of CPs, potentially due to the degradation of some of the involved chemicals during the transesterification process. We also investigated the stability of the pure ionic liquid (IL) and the IL + DMSO solvent system at elevated temperatures by heating them at 100 °C for 5 h, confirming their chemical integrity through 1H NMR analysis. Additionally, we assessed the compatibility between the solvent system and cellulose by subjecting a mixture of cellulose and the solvent system to 100 °C for 5 h. To compare the structures of untreated cellulose and regenerated cellulose, Fourier transform infrared (FT-IR) spectroscopy was employed. Furthermore, we determined the molar mass of both untreated cellulose and regenerated cellulose, as well as CPs synthesized at higher reaction temperatures and longer durations, using intrinsic viscosity measurements. Lastly, we examined the solubility properties of CPs.

Preparation of Thermoplastic Cellulose Esters in [mTBNH][OAC] Ionic Liquid by Transesterification Reaction

The transesterification of cellulose with vinyl esters in ionic liquid media is suggested as a prospective environmentally friendly alternative to conventional esterification. In this study, various long-chain cellulose esters (laurate, myristate, palmitate, and stearate) with a degree of substitution (DS) up to 1.8 have been synthesized in novel distillable ionic liquid, [mTBNH][OAC]. This IL has high dissolving power towards cellulose, which can improve homogeneous transesterification. Additionally, [mTBNH][OAC] has durability towards recycling and can be regenerated and re-used again for the next cycles of esterification. DMSO is used as a co-solvent because of its ability to speed up mass transport due to lower solvent viscosity. The optimization of the reaction parameters, such as co-solvent content, temperature (20-80 °C), reaction time (1-5 h), and a molar ratio of reactants (1-5 eq. AGU) is reported. It was found that within studied reaction conditions, DS increases with increasing reaction time, temperature, and added vinyl esters. Structure analysis using FTIR, 1H, and 13C NMR after acylation revealed the introduction of the alkyl chains into cellulose for all studied samples. The results also suggested that the substitution order of the OH group is C7-O6 > C7-O2 > C7-O3. Unique, complex thermal and rheological investigation of the cellulose esters shows the growth of an amorphous phase upon the degree of substitution. At the same time, the homogeneous substitution of cellulose with acyl chains increases the melt viscosity of a material. Internal plasticization in cellulose esters was found to be the mechanism for the melt processing of the material. Long-chain cellulose esters show the potential to replace commonly used externally plasticized cellulose derivatives.

Sensing Techniques for Organochlorides through Intermolecular Interaction with Bicyclic Amidines

Toxic organochloride molecules are widely used in industry for various purposes. With their high volatility, the direct detection of organochlorides in environmental samples is challenging. Here, a new organochloride detection mechanism using 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) is introduced to simplify a sensing method with higher detection sensitivity. Three types of organochloride compounds-trichloroethylene (TCE), dichloromethane (DCM), and dichlorodiphenyltrichloroethane (DDT)—were targeted to understand DCM conjugation chemistry by using nuclear magnetic resonance (NMR) and liquid chromatography with a mass spectrometer (LC-MS). ¹³C-NMR spectra and LC-MS data indicated that DBN can be labeled on these organochloride compounds by chlorine–nitrogen interaction. Furthermore, to demonstrate the organochloride sensing capability, the labeling yield and limit of detection were determined by a colorimetric assay as well as micellar electrokinetic chromatography (MEKC). The interaction with DBN was most appreciable for TCE, among other organochlorides. TCE was detected at picomolar levels, which is two orders of magnitude lower than the maximum contaminant level set by the United States Environmental Protection Agency. MEKC, in conjunction with this DBN-labeling method, enables us to develop a field-deployable sensing platform for detecting toxic organochlorides with high sensitivity.

Dissolution and Hydrolysis of Bleached Kraft Pulp Using Ionic Liquids

Forestry industries in Chile are facing an important challenge-diversifying their products using green technologies. In this study, the potential use of Ionic Liquids (ILs) to dissolve and hydrolyze eucalyptus wood (mix of Eucalyptus nitens and Eucalyptus globulus) kraft pulp was studied. The Bleached Hardwood Kraft Pulp (BHKP) from a Chilean pulp mill was used together with five different ILs: 1-butyl-3-methylimidazolium chloride [bmim][Cl], 1-butyl-3-methylimidazolium acetate [bmim][Ac], 1-butyl-3-methylimidazolium hydrogen sulfate [bmim][HSO4], 1-ethyl-3-methylimidazolium chloride [emim][Cl], 1-ethyl-3-methylimidazolium acetate [emim][Ac]. Experimentally, one vacuum reactor was designed to study the dissolution/hydrolysis process for each ILs; particularly, the cellulose dissolution process using [bmim][Cl] was studied proposing one molecular dynamic model. Experimental characterization using Atomic Force Microscopy, conductometric titration, among other techniques suggest that all ILs are capable of cellulose dissolution at different levels; in some cases, the dissolution evolved to partial hydrolysis appearing cellulose nanocrystals (CNC) in the form of spherical aggregates with a diameter of 40-120 nm. Molecular dynamics simulations showed that the [bmim][Cl] anions tend to interact actively with cellulose sites and water molecules in the dissolution process. The results showed the potential of some ILs to dissolve/hydrolyze the cellulose from Chilean Eucalyptus, maintaining reactive forms.

Solvent Welding and Imprinting Cellulose Nanofiber Films Using Ionic Liquids

Cellulose nanofiber films (CNFF) were treated via a welding process using ionic liquids (ILs). Acid-base-conjugated ILs derived from 1,5-diazabicyclo[4.3.0]non-5-ene [DBN] and 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) were utilized. The removal efficiency of ILs from welded CNFF was assessed using liquid-state nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared spectroscopy (FTIR). The mechanical and physical properties of CNFF indicated surface plasticization of CNFF, which improved transparency. Upon treatment, the average CNFF toughness increased by 27%, and the films reached a Young's modulus of ∼5.8 GPa. These first attempts for IL "welding" show promise to tune the surfaces of biobased films, expanding the scope of properties for the production of new biobased materials in a green chemistry context. The results of this work are highly relevant to the fabrication of CNFFs using ionic liquids and related solvents.

Vaporization of protic ionic liquids derived from organic superbases and short carboxylic acids

Evaluation of the phase behavior and cohesive energy of DBN/DBU and carboxylic acid based protic ionic liquids (PILs).

Structure–property relationships in protic ionic liquids: a thermochemical study

How does cation functionality influence the strength of intermolecular interactions in protic ionic liquids (PILs)? Quantifying the energetics of PILs can be an invaluable tool to answer this fundamental question.