Facile Synthesis and Direct Activation of Zirconium Based Metal–Organic Frameworks from Acetone

Room-temperature synthesis of a Zr-UiO-66 metal-organic framework via mechanochemical pretreatment for the rapid removal of EDTA-chelated copper from water

Treatment of heavy metal pollution in complexed states within water bodies presents significant challenges in the current water treatment field. Adsorption as a means for the removal of heavy metals is characterized by its simplicity of operation, stable effluent, and minimal equipment requirements. Metal-organic frameworks (MOFs) as adsorbents hold significant interest for applications in water treatment. In this study, we investigated a green synthesis approach for the ball-milling pretreated synthesis of UiO-66(Zr) at room temperature, abbreviated as UiO-66(Zr)-rm. Besides having the same thermal stability and crystal structure as the product from microwave-assisted synthesis (UiO-66(Zr)-mw), the resulting UiO-66(Zr)-rm features smaller particle size and superior mesoporous structure. The adsorption efficiency and mechanism for removing EDTA-chelated copper (EDTA-CuII), a complexed heavy metal in water, were extensively analyzed. UiO-66(Zr)-rm presented a maximum adsorption capacity over EDTA-CuII of 43 mg g-1 and a much higher adsorption rate (0.16 g (mg h)-1) than UiO-66(Zr)-mw (0.06 g (mg h)-1). Hierarchically mesostructured defects allow the sorbate to have more effective diffusion in a shorter time to achieve faster adsorption kinetics. Benefiting from the mild synthesis conditions and nontoxic solvents, UiO-66(Zr) has the potential to be produced at a scaled-up level, thereby exhibiting excellent adsorption performance for the removal of complexed heavy metals in the future.

MOF-based nanocomposites as transduction matrices for optical and electrochemical sensing

Metal Organic Frameworks (MOFs), a class of crystalline microporous materials have been into research limelight lately due to their commendable physio-chemical properties and easy fabrication methods. They have enormous surface area which can be a working ground for innumerable molecule adhesions and site for potential sensor matrices. Their biocompatibility makes them valuable for in vitro detection systems but a compromised conductivity requires a lot of surface engineering of these molecules for their usage in electrochemical biosensors. However, they are not just restricted to a single type of transduction system rather can also be modified to achieve feat as optical (colorimetry, luminescence) and electro-luminescent biosensors. This review emphasizes on recent advancements in the area of MOF-based biosensors with focus on various MOF synthesis methods and their general properties along with selective attention to electrochemical, optical and opto-electrochemical hybrid biosensors. It also summarizes MOF-based biosensors for monitoring free radicals, metal ions, small molecules, macromolecules and cells in a wide range of real matrices. Extensive tables have been included for understanding recent trends in the field of MOF-composite probe fabrication. The article sums up the future scope of these materials in the field of biosensors and enlightens the reader with recent trends for future research scope.

Aptamer-functionalized metal-organic framework-coated nanofibers with multi-affinity sites for highly sensitive, selective recognition of ultra-trace microcystin-LR

A novel aptamer-functionalized metal-organic framework nanofibrous composite (viz. PAN/UiO@UiO2-N₃-aptamer) with a high aptamer coverage density was proposed based on the electrospinning and seeded growth method, and used for specific affinity recognition of trace Microcystin-LR (MC-LR). Heterobifunctional ligand was used to modify the metal-organic framework nanoparticles (MOF NPs) surface, which could passivate the MOF surface with respect to unmodified DNA, followed by coupling massive aptamers on MOF of the solid-phase microextraction (SPME) fiber using click chemistry. Characterizations including morphology, spectra analysis, mechanical stability, binding capacity and specificity were fulfilled. Applied to the analysis of MC-LR, the good selective and sensitive recognition were obtained with the detection limit as low as 0.003 ng/mL, which was better than most non-specific SPME or solid-phase extraction (SPE) protocols. The stability and reproducibility were acceptable, and the intra-day, inter-day and column-to-column relative standard deviations (RSDs) for the recovery of MC-LR were gained in the range from 2.5% to 14.3%, respectively. Satisfactory recoveries of MC-LR in environmental water samples were measured as 96.3 ± 4.7% - 98.9 ± 2.7% (n = 3) in tap water, 94.4 ± 2.5% - 96.1 ± 3.5% (n = 3) in pond water, and 97.0 ± 2.1% - 97.9 ± 3.1% (n = 3) in river water, respectively. This work demonstrated that the electrospun nanofibrous composite with massive aptamers would be a better alternative for ultra-trace MC-LR detection with good selectivity, matrix-resistance ability and high resolution.

Aptamer-functionalized metal-organic framework-based electrospun nanofibrous composite coating fiber for specific recognition of ultratrace microcystin in water

A novel aptamer@AuNPs@UiO-66-NH₂ electrospun nanofibrous coating fiber for specific recognition of microcystin-LR (MC-LR) was proposed by using electrospinning, metal-organic frameworks (MOF) seed growth and AuNPs bridging aptamer strategies. Characterization of morphology, structure and stability of the obtained affinity nanofibrous coating fiber were investigated. High loading of MOFs and aptamers on the nanofibrous fiber were achieved and successfully applied for accurate identification of MC-LR by solid-phase microextraction (SPME) coupled with LC-MS. Highly specific recognition of MC-LR with little interference of analogs was achieved with extremely low LOD (0.004 ng/mL), good precision (CV% < 11.0%) and low relative error (RE% = -1.5% to -10.0%), which was rather better than that of the traditional SPME or SPE protocols. Satisfactory recoveries of MC-LR were obtained in the range of 92.0-96.8% (n = 3) in fortified tap water, raw pond water and river water samples. This work revealed an attractive alternative access to specific recognition and super-sensitive analysis of MC-LR in water.

A Showcase of Green Chemistry: Sustainable Synthetic Approach of Zirconium-Based MOF Materials

Zirconium-based metal-organic framework materials (Zr-MOFs) have more practical usage over most conventional benchmark porous materials and even many other MOFs due to the excellent structural stability, rich coordination forms, and various active sites. However, their mass-production and application are restricted by the high-cost raw materials, complex synthesis procedures, harsh reaction conditions, and unexpected environmental impact. Based on the principles of "Green Chemistry", considerable efforts have been done for breaking through the limitations, and significant progress has been made in the sustainable synthesis of Zr-MOFs over the past decade. In this review, the advancements of green raw materials and green synthesis methods in the synthesis of Zr-MOFs are reviewed, along with the corresponding drawbacks. The challenges and prospects are discussed and outlooked, expecting to provide guidance for the acceleration of the industrialization and commercialization of Zr-MOFs.

Experimental Demonstration of Dynamic Temperature-Dependent Behavior of UiO-66 Metal-Organic Framework: Compaction of Hydroxylated and Dehydroxylated Forms of UiO-66 for High-Pressure Hydrogen Storage

High-pressure (700 MPa or ∼100 000 psi) compaction of dehydroxylated and hydroxylated UiO-66 for H₂ storage applications is reported. The dehydroxylation reaction was found to occur between 150 and 300 °C. The H₂ uptake capacity of powdered hydroxylated UiO-66 reaches 4.6 wt % at 77 K and 100 bar, which is 21% higher than that of dehydroxylated UiO-66 (3.8 wt %). On compaction, the H₂ uptake capacity of dehydroxylated UiO-66 pellets reduces by 66% from 3.8 to 1.3 wt %, while for hydroxylated UiO-66 the pellets show only a 9% reduction in capacity from 4.6 to 4.2 wt %. This implies that the H₂ uptake capacity of compacted hydroxylated UiO-66 is at least three times higher than that of dehydroxylated UiO-66, and therefore, hydroxylated UiO-66 is more promising for hydrogen storage applications. The H₂ uptake capacity is closely related to compaction-induced changes in the porosity of UiO-66. The effect of compaction is greatest in partially dehydroxylated UiO-66 samples that are thermally treated at 200 and 290 °C. These compacted samples exhibit XRD patterns indicative of an amorphous material, low porosity (surface area reduces from between 700 and 1300 m²/g to ca. 200 m²/g and pore volume from between 0.4 and 0.6 cm³/g to 0.1 and 0.15 cm³/g), and very low hydrogen uptake (0.7-0.9 wt % at 77 K and 100 bar). The observed activation-temperature-induced dynamic behavior of UiO-66 is unusual for metal-organic frameworks (MOFs) and has previously only been reported in computational studies. After compaction at 700 MPa, the structural properties and H₂ uptake of hydroxylated UiO-66 remain relatively unchanged but are extremely compromised upon compaction of dehydroxylated UiO-66. Therefore, UiO-66 responds in a dynamic manner to changes in activation temperature within the range in which it has hitherto been considered stable.

Continuous Flow Photochemical and Thermal Multi-Step Synthesis of Bioactive 3-Arylmethylene-2,3-Dihydro-1H-Isoindolin-1-Ones

An effective multi-step continuous flow approach towards N-diaminoalkylated 3-arylmethylene-2,3-dihydro-1H-isoindolin-1-ones, including the local anesthetic compound AL-12, has been realized. Compared to the traditional decoupled batch processes, the combined photochemical–thermal–thermal flow setup rapidly provides the desired target compounds in superior yields and significantly shorter reaction times.

Green separation of rare earth elements by valence-selective crystallization of MOFs

A green valence-selective crystallization strategy of MOFs is developed for the precise separation of Ce element at room temperature.

Tailoring the Adsorption and Reaction Chemistry of the Metal-Organic Frameworks UiO-66, UiO-66-NH2, and HKUST-1 via the Incorporation of Molecular Guests

Metal-organic frameworks (MOFs) are versatile materials highly regarded for their porous nature. Depending on the synthetic method, various guest molecules may remain in the pores or can be systematically loaded for various reasons. Herein, we present a study that explores the effect of guest molecules on the adsorption and reactivity of the MOF in both the gas phase and solution. The differences between guest molecule interactions and the subsequent effects on their activity are described for each system. Interestingly, different effects are observed and described in detail for each class of guest molecules studied. We determine that there is a strong effect of alcohols with the secondary building unit of UiO MOFs, while Lewis bases have an effect on the reactivity of the -NH₂ group in UiO-66-NH₂ and adsorption by the coordinatively unsaturated copper sites in HKUST-1. These effects must be considered when determining synthesis and activation methods of MOFs toward various applications.