In-Situ Immobilization of H5PMo10V2O40 on Protonated Graphitic Carbon Nitride under Hydrothermal Conditions: A Highly Efficient and Reusable Catalyst for Hydroxylation of Benzene

An iron-containing POM-based hybrid compound as a heterogeneous catalyst for one-step hydroxylation of benzene to phenol

It is a major challenge to perform one-pot hydroxylation of benzene to phenol under mild conditions, which replaces the environmentally harmful cumene method. Thus, finding highly efficient heterogeneous catalysts that can be recycled is extremely significant. Herein, a (POM)-based hybrid compound {[FeII(pyim)2(C2H5O)][FeII(pyim)2(H2O)][PMoV2MoVI9VIV3O42]}·H2O (pyim = 2-(2-pyridyl)benzimidazole) (Fe2-PMo11V3) was successfully prepared by hydrothermal synthesis using typical Keggin POMs, iron ions and pyim ligands. Single-crystal diffraction shows that the Fe-pyim unit in Fe2-PMo11V3 forms a stable double-supported skeleton by Fe-O bonding to the polyacid anion. Remarkably, due to the introduction of vanadium, Fe2-PMo11V3 forms a divanadium-capped conformation. Benzene oxidation experiments indicated that Fe2-PMo11V3 can catalyze the benzene hydroxylation reaction to phenol in a mixed solution of acetonitrile and acetic acid containing H2O2 at 60 °C, affording a phenol yield of about 16.2% and a selectivity of about 94%.

Highly Dispersed Vanadia Anchored on Protonated g-C3N4 as an Efficient and Selective Catalyst for the Hydroxylation of Benzene into Phenol

The direct hydroxylation of benzene is a green and economical-efficient alternative to the existing cumene process for phenol production. However, the undesired phenol selectivity at high benzene conversion hinders its wide application. Here, we develop a one-pot synthesis of protonated g-C3N4 supporting vanadia catalysts (V-pg-C3N4) for the efficient and selective hydroxylation of benzene. Characterizations suggest that protonating g-C3N4 in diluted HCl can boost the generation of amino groups (NH/NH2) without changing the bulk structure. The content of surface amino groups, which determines the dispersion of vanadia, can be easily regulated by the amount of HCl added in the preparation. Increasing the content of surface amino groups benefits the dispersion of vanadia, which eventually leads to improved H2O2 activation and benzene hydroxylation. The optimal catalyst, V-pg-C3N4-0.46, achieves 60% benzene conversion and 99.7% phenol selectivity at 60 oC with H2O2 as the oxidant.

An efficient photocatalyst based on H5PMo10V2O40/UiO-66-NH2 for direct hydroxylation of benzene to phenol by H2O2

To realize the direct hydroxylation of benzene to phenol by hydrogen peroxide, an efficient photoactive catalyst system was prepared by the recombination of H₅PMo₁₀V₂O₄₀ and UiO-66-NH₂. The heterpolyacid was uniformly distributed on the UiO-66-NH₂, and the combination was stable. The composite could effectively photocatalyze the direct hydroxylation of benzene to phenol by H₂O₂ in the mixture solution of acetonitrile and acetic acid. The yield and selectivity were 14.08% and 98.8% under the optimum condition, respectively. The performance of the catalyst still maintained well after 5 catalytic cycles. Hence, the investigated catalyst system might be applied in the field of hydroxylation of benzene to phenol.

Hybridizing electron-mediated H5PMo10V2O40 with CdS/g-C3N4 for efficient photocatalytic performance of Z-scheme heterojunction in wastewater treatment

Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H₅PMo₁₀V₂O₄₀ (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C₃N₄ (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (Ⅵ) under visible light irradiation. The maximum rate constant reached 0.092 min^-1 for RhB degradation at 60 min and 0.260 min^-1 for Cr (Ⅵ) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h⁺ > ·O₂^- > ·OH, while ·O₂^- and e^- were essential for the reduction of Cr (Ⅵ). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.

Protonated g-C3N4 coated Co9S8 heterojunction for photocatalytic H2O2 production

Photocatalytic H₂O₂ production is an eco-friendly technique because only H₂O, molecular O₂ and light are involved. However, it still confronts the challenges of the unsatisfactory productivity of H₂O₂ and the dependence on organic electron donors or high purity O₂, which restrict the practical application. Herein, we construct a type-II heterojunction of the protonated g-C₃N₄ coated Co₉S₈ semiconductor for photocatalytic H₂O₂ production. The ultrathin g-C₃N₄ uniformly spreads on the surface of the dispersed Co₉S₈ nanosheets by a two-step method of protonation and dip-coating, and exhibits improved photogenerated electrons transportability and e^--h⁺ pairs separation ability. The photocatalytic system can achieve a considerable productivity of H₂O₂ to 2.17 mM for 5 h in alkaline medium in the absence of the organic electron donors and pure O₂. The optimal photocatalyst also obtains the highest apparent quantum yield (AQY) of 18.10% under 450 nm of light irradiation, as well as a good reusability. The contribution of the type-II heterojunction is that the migrations of electrons and holes within the interface between g-C₃N₄ and Co₉S₈ matrix promote the separation of photocarriers, and another channel is also opened for H₂O₂ generation. The accumulated electrons in conduction band (CB) of Co₉S₈ contribute to the major channel of two-electron reduction of O₂ for H₂O₂ production. Meanwhile, the electrons in CB of g-C₃N₄ participate in the single electron reduction of O₂ as an auxiliary channel to enhance the H₂O₂ production.

Exploiting Redox-Complementary Peptide/Polyoxometalate Coacervates for Spontaneously Curing into Antimicrobial Adhesives

Recently, there has been a wave of reports on the fabrication of peptide-based underwater adhesives with the aim of understanding the adhesion mechanism of marine sessile organisms or creating new biomaterials beyond nature. However, the poor shear adhesion performance of the current peptide adhesives has largely hindered their applications. Herein, we proposed to sequentially perform the interfacial adhesion and bulk cohesion of peptide-based underwater adhesives using two redox-complementary peptide/polyoxometalate (POM) coacervates. The oxidative coacervates were prepared by mixing oxidative H₅PMo₁₀V₂O₄₀ and cationic peptides in an aqueous solution. The reductive coacervates consisted of K₅BW₁₂O₄₀ and cysteine-containing reductive peptides. Each of the individual coacervate has well-defined spreading capacity to achieve fast interfacial attachment and adhesion, but their cohesion is poor. However, after mixing the two redox-complementary coacervates at the target surface, effective adhesion and spontaneous curing were observed. We identified that the spontaneous curing resulted from the H₅PMo₁₀V₂O₄₀-regulated oxidization of cysteine-containing peptides. The formed intermolecular disulfide bonds improved the cross-linking density of the dual-peptide/POM coacervates, giving rise to the enhanced bulk cohesion and mechanical strength. More importantly, the resultant adhesives showcased excellent bioactivity to selectively suppress the growth of Gram-positive bacteria due to the presence of the polyoxometalates. This work raises further potential in the creation of biomimetic adhesives through the orchestrating of covalent and noncovalent interactions in a sequential fashion.

Hydroxylation of benzene to phenol over heteropoly acid H5PMo10V2O40 supported on amine-functionalized MCM-41

Supported catalysts with Keggin type heteropoly acids (H5PMo10V2O40) loaded onto amine-functionalized MCM-41 for the catalytic hydroxylation of benzene to phenol with H2O2 were prepared by a wet impregnation method. The effects of the preparation conditions on the properties and activity of the supported catalysts were fully investigated. The results showed that the catalyst retained the mesoporous structure of MCM-41 and H5PMo10V2O40 was dispersed uniformly on the surface of the amine-functionalized MCM-41. Meanwhile, the reusability and catalytic performance of the catalyst were affected by two key factors, i.e., the interaction between the heteropoly acid and the surface of MCM-41, and the hydrophobicity of the catalyst since they decide the leaching of H5PMo10V2O40 and the adsorption of benzene. The catalyst with H5PMo10V2O40 loaded onto amine-functionalized MCM-41, which was prepared using ethanol as the solvent, exhibited the highest phenol yield (20.4%), a turnover frequency value of 20.3 h-1 and good reusability. We believe this work offers an effective and facile strategy for the preparation of a new catalyst for hydroxylation of benzene to phenol.

Sodium ion intercalation and multi redox behavior of a Keggin type polyoxometalate during [PMo10V2O40]5- to [PMo10V2O40]27- as a cathode material for Na-ion rechargeable batteries

Recently, the development of cathode materials for Na-ion batteries has gained much attention due to the abundance, low cost, and easy availability of resources. Apart from the usual metal oxides, multi-electron redox materials grabbed attention due to their high energy density and practical capacity with long cycle life. Polyoxometalates (POMs) are inorganic clusters of higher valent metals, and act as electron sponges with multi-electron redox properties. Herein we report a Keggin-type polyoxometalate [PMo₁₀V₂O₄₀]⁵⁻ with Na⁺ and H⁺ counter cations as a cathode material for Na-ion batteries. Further the formation of POM is evidenced by PXRD, FT-IR, flame photometry and XPS studies. In Na-POM, Na⁺ ions in the intercluster cavities provide a better pathway and easy diffusion during the charge/discharge process, and contribute to better electrochemical properties than H-POM. The DFT studies further explore the detailed mechanistic pathway of Na⁺ ions around the clusters in the normal and super-reduced states. Na-POM enables better cycling stability and capacity retention with a specific discharge capacity of 123 mA h g⁻¹ at 0.1C rate at room temperature.

The versatile property of the Keggin type POM is the multi-electron transfer that happens during the switching between [PMo₁₀V₂O₄₀]⁵⁻ to [PMo₁₀V₂O₄₀]²⁷⁻. This tunable behavior makes it unique, efficient material as a cathode for Na-ion batteries.

A novel heterogeneous catalyst NH2-MIL-88/PMo10V2 for the photocatalytic activity enhancement of benzene hydroxylation

In this work, heterogeneous catalyst NH2-MIL-88/PMo10V2-3 has shown the high hydroxylation activity of benzene under visible light (a 5 W LED), which mainly attributed to the production of hydroxyl radical(˙OH) and V5+/V4+ redox pair in the existence of electron (e−).

Oxygen Doping in Graphitic Carbon Nitride for Enhanced Photocatalytic Hydrogen Evolution

The incorporation of oxygenic groups could remarkably enhance the light absorption and charge separation of graphitic carbon nitride (g-C₃ N₄ ). The intrinsic role of oxygenic species on photocatalytic activity in g-C₃ N₄ has been intensively studied, but it is still not fully explored. Herein, the essential relationships between oxygenic functionalities and the catalytic performance are revealed. Results demonstrate that C-O-C functionality as an electron trap could help to increase the resistance of conduction transfer (R_ct ) by limiting electrons transfer in CNx. In contrast, N-C-O functionality between different tri-s-triazine unites could promote the electrons transfer, leading to a reduced R_ct in CNx. The best H₂ production rate (3.70 mmol h^-1  g^-1 , 12.76-fold higher than that of CN) is obtained over CN3, because of the highest N-C-O ratio (r_N-C-O ). The apparent quantum efficiency (AQE) of CN3 at 405 nm, 420 nm, 450 nm, 500 nm and 550 nm is 33.90 %, 20.88 %, 8.25 %, 3.66 % and 1.01 %, respectively.

Visible light responsive CuS/ protonated g-C3N4 heterostructure for rapid sterilization

As the environment deterioration is becoming more serious, bacterial pollution is threatening the health of human beings. Hence, it is vital to develop rapid and safe sterilization strategy. Herein, CuS/protonated g-C₃N₄(CuS/PCN) composites were synthesized by simple hydrothermal method and electrostatic adsorption. This heterostructured system exhibited enhanced photocatalytic properties under visible light compared with CuS or g-C₃N₄ alone, ascribing to the rapid separation of photogenerated electron-hole pairs. Meanwhile, the obvious photothermal effects of CuS/PCN were achieved and the temperature increased with the increased amount of CuS in the composites due to the more light absorption. However, when the CuS content is more than 10 %, photocurrent density is decreased with increasing the amount of CuS, indicating the increased recombination of photogenerated electron-hole pairs. When the CuS content is 20 %, the composite can perform the optimized synergistic effects of both photothermal action and photocatalysis under light irradiation for 20 min. The corresponding bacteria-killing efficiency against Staphylococcus aureus and Escherichia coli is 98.23 % and 99.16 %, respectively. The underlying mechanism is that the bacterial membrane can be weakened by reactive oxygen species and bacterial activities are inhibited by hyperthermia. This CuS/PCN heterojunction is promising for environmental disinfection including water and public facilities sterilization.

Amorphous Cr-doped g-C3N4 as an efficient catalyst for the direct hydroxylation of benzene to phenol

The intrinsic correlations between catalyst structure and catalytic performance at different calcination temperatures were studied.

Cerium promoted V-g-C3N4 as highly efficient heterogeneous catalysts for the direct benzene hydroxylation

A series of Ce x -V-g-C3N4 catalysts with different cerium content were synthesized by a facile co-assembly method. Compared with pure V-g-C3N4 catalyst, the addition of cerium facilitated the high dispersion of vanadium species as well as the benzene adsorption ability of the corresponding catalysts. Also, the existence of cerium promoted the partial reduction of vanadium species, which improved the redox property of vanadium species as the active centres. The Ce x -V-g-C3N4 catalysts showed considerably improved activity in the benzene hydroxylation reaction compared with V-g-C3N4 catalyst. Among the catalysts studied, Ce0.07-0.07 V-g-C3N4 exhibited the best catalytic activity with a benzene conversion of 33.7% and a phenol yield of 32.3% with good structural and catalytic stability, while only 24.7% of benzene conversion and phenol yield of 24.2% were obtained over 0.07 V-g-C3N4.

Polyoxometalates covalently combined with graphitic carbon nitride for photocatalytic hydrogen peroxide production

The polyoxometalate (POM) cluster [SiW₁₁O₃₉]⁸⁻ (SiW₁₁) with photoreductive ability has been successfully covalently combined with graphitic carbon nitride (g-C₃N₄) through the organic linker strategy.

Photocatalytic oxidation of benzene to phenol using dioxygen as an oxygen source and water as an electron source in the presence of a cobalt catalyst

The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number.

Photocatalytic hydroxylation of benzene to phenol by dioxygen (O₂) occurs under visible light irradiation of an O₂-saturated acetonitrile solution containing [Ru^II(Me₂phen)₃]²⁺ as a photocatalyst, [Co^III(Cp*)(bpy)(H₂O)]²⁺ as an efficient catalyst for both the water oxidation and benzene hydroxylation reactions, and water as an electron source in the presence of Sc(NO₃)₃. The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number (e.g., >500). Mechanistic studies revealed that the photocatalytic reduction of O₂ to H₂O₂ is the rate-determining step, followed by efficient catalytic hydroxylation of benzene to phenol with H₂O₂, paving a new way for the photocatalytic oxygenation of substrates by O₂ and water.