Organosolv Pretreatment of Sugar Cane Bagasse for Bioethanol Production

Enhanced production of bioethanol through supercritical carbon dioxide-mediated pretreatment and saccharification of dewaxed bagasse

The pretreatment and saccharification of dewaxed bagasse (DWB) has been investigated under various reaction conditions ranging 2000 to 3200 psi, at 70 ± 1 °C in supercritical carbon dioxide (SCC). This has been in attempt to transform the DWB into fermentable sugar and bioethanol in high yields. The effect of SCC mediated pretreatment and enzymatic hydrolysis on structural and morphological alterations in DWB has been ascertained through diverse analytical methods. The sugar has been released through cellulase (40 FPU/mL) mediated enzymatic hydrolysis of pretreated DWB in sodium acetate buffer (pH 4.7) within 1 h at SCC 2800 psi, 70 ± 1 °C. The released sugar was subsequently fermented in the presence of yeast (Saccharomyces crevices, 135 CFU) at 28 ± 1 °C over 72 h to afford the bioethanol. The SCC mediated process conducted in acetic acid:water media (1:1) at 2800 psi, 70 ± 1 °C over 6 h has afforded the pretreated DWB with maximum yield towards the production of fermentable sugar and bioethanol. The production of fermentable sugar and bioethanol has been electrochemically estimated through cyclic voltammetry (CV) and square wave voltammetry (SWV) over glassy carbon electrode in KOH (0.1 M). The electrochemical methods were found selective and in close agreement for estimation of the yields (%) of fermentable sugars and bioethanol. The yield (%) of fermentable sugar estimated from CV and SWV were 80.10 ± 5.34 and 79.00 ± 5.09 respectively. Whereas the yield (%) of bioethanol estimated from CV and SWV were 81.30 ± 2.78% and 78.6 ± 1.25% respectively. Present investigation delivers a SCC mediated green and sustainable method of pretreatment of DWB to afford the enhanced saccharification, to produce bioethanol in high yields.

Comparative Study of Green and Traditional Routes for Cellulose Extraction from a Sugarcane By-Product

Sugarcane bagasse (SCB) is the main residue of the sugarcane industry and a promising renewable and sustainable lignocellulosic material. The cellulose component of SCB, present at 40-50%, can be used to produce value-added products for various applications. Herein, we present a comprehensive and comparative study of green and traditional approaches for cellulose extraction from the by-product SCB. Green methods of extraction (deep eutectic solvents, organosolv, and hydrothermal processing) were compared to traditional methods (acid and alkaline hydrolyses). The impact of the treatments was evaluated by considering the extract yield, chemical profile, and structural properties. In addition, an evaluation of the sustainability aspects of the most promising cellulose extraction methods was performed. Among the proposed methods, autohydrolysis was the most promising approach in cellulose extraction, yielding 63.5% of a solid fraction with ca. 70% cellulose. The solid fraction showed a crystallinity index of 60.4% and typical cellulose functional groups. This approach was demonstrated to be environmentally friendly, as indicated by the green metrics assessed (E(nvironmental)-factor = 0.30 and Process Mass Intensity (PMI) = 20.5). Autohydrolysis was shown to be the most cost-effective and sustainable approach for the extraction of a cellulose-rich extract from SCB, which is extremely relevant for aiming the valorization of the most abundant by-product of the sugarcane industry.

Glycerol organosolv pretreatment can unlock lignocellulosic biomass for production of fermentable sugars: Present situation and challenges

The complex structure of lignocellulosic biomass forms the recalcitrance to prevent the embedded holo-cellulosic sugars from undergoing the biodegradation. Therefore, a pretreatment is often required for an efficient enzymatic lignocellulosic hydrolysis. Recently, glycerol organosolv (GO) pretreatment is revealed potent in selective deconstruction of various lignocellulosic biomass and effective improvement of enzymatic hydrolysis. Evidently, the GO pretreatment is capable to modify the structure of dissolved components by glycerolysis, i.e., by trans-glycosylation onto glyceryl glycosides and by hydroxylation grafting onto glyceryl lignin. Such modifications tend to protect these main components against excessive degradation, which can be mainly responsible for the obviously less fermentation inhibitors arising in the GO pretreatment. This pretreatment can provide opportunities for valorization of emerging lignocellulosic biorefinery with production of value-added biochemicals. Recent advances in GO pretreatment of lignocellulosic biomass followed by enzymatic hydrolysis are reviewed, and perspectives are made for addressing remaining challenges.

Thermochemical and Catalytic Conversion Technologies for the Development of Brazilian Biomass Utilization

The social, economic, and environmental impacts of climate change have been shown to affect poorer populations throughout the world disproportionally, and the COVID-19 pandemic of 2020–2021 has only exacerbated the use of less sustainable energy, fuel, and chemical sources. The period of economic and social recovery following the pandemic presents an unprecedented opportunity to invest in biorefineries based on the pyrolysis of agricultural residues. These produce a plethora of sustainable resources while also contributing to the economic valorization of first-sector local economies. However, biomass-derived pyrolysis liquid is highly oxygenated, which hinders its long-term stability and usability. Catalytic hydrogenation is a proposed upgrading method to reduce this hindrance, while recent studies on the use of nickel and niobium as low-cost catalysts, both abundant in Brazil, reinforce the potential synergy between different economic sectors within the country. This review gathers state-of-the-art applications of these technologies with the intent to guide the scientific community and lawmakers alike on yet another alternative for energy and commodities production within an environmentally sustainable paradigm.

Advances in Pretreatment of Straw Biomass for Sugar Production

Straw biomass is an inexpensive, sustainable, and abundant renewable feedstock for the production of valuable chemicals and biofuels, which can surmount the main drawbacks such as greenhouse gas emission and environmental pollution, aroused from the consumption of fossil fuels. It is rich in organic content but is not sufficient for extensive applications because of its natural recalcitrance. Therefore, suitable pretreatment is a prerequisite for the efficient production of fermentable sugars by enzymatic hydrolysis. Here, we provide an overview of various pretreatment methods to effectively separate the major components such as hemicellulose, cellulose, and lignin and enhance the accessibility and susceptibility of every single component. This review outlines the diverse approaches (e.g., chemical, physical, biological, and combined treatments) for the excellent conversion of straw biomass to fermentable sugars, summarizes the benefits and drawbacks of each pretreatment method, and proposes some investigation prospects for the future pretreatments.

Mild Acid-Catalyzed Atmospheric Glycerol Organosolv Pretreatment Effectively Improves Enzymatic Hydrolyzability of Lignocellulosic Biomass

Conventional atmospheric glycerol organosolv pretreatment is energy-intensive with the requirement of long time and/or high temperature. Herein, acid-catalyzed atmospheric glycerol organosolv (ac-AGO) pretreatment was developed under a mild condition to modify the sugarcane bagasse structure for improving enzymatic hydrolyzability. Using single factor and central composite design experiments, ac-AGO pretreatment was optimized at 200 °C for 15 min with 0.06% H₂SO₄ addition, wherein the hemicellulose and lignin removal rates were 82 and 52%, respectively, with extremely high cellulose retention of 98%. The ac-AGO-pretreated substrate exhibited good enzymatic hydrolyzability at a modest cellulase loading, affording a 70% glucose yield after 72 h. Multiple analysis tools were used to correlate the hydrolyzability of the substrate with its structural features. The results indicated that the mild ac-AGO pretreatment can modify the lignocellulosic biomass structure to achieve good hydrolyzability, mainly resulting in significant hemicellulose removal.

The byproduct-organic acids strengthened pretreatment of cassava straw: Optimization and kinetic study

The subcritical liquid hot water (SLHW) pretreatment could be strengthened by its byproduct-organic acids, such as acetic acid (AA), lactic acid (LA) and formic acid (FA). The effects of these three acids on the pretreatment were investigated by the yield of fermentable sugars. The results showed that the addition of acids could effectively catalyze the hydrolysis of hemicellulose to C5 sugars and contribute to the subsequent enzymatic hydrolysis of cellulose. It was found that all three organic acids promote xylose production, and the copresence of AA + LA could limit the content of the fermentation inhibitor. The optimum proportion of three organic acids were 0.33 wt%AA + 0.45 wt%LA + 0.20 wt%FA, and the yield of C5 sugars after pretreatment and C6 sugar after enzymatic hydrolysis were 89.06% and 78.56%, respectively. The kinetic studies proved that byproduct-organic acids could promote xylose production and inhibit its further degradation and explained that xylose would accumulate at lower temperatures.