Reversing the Dye Adsorption and Separation Performance of Metal–Organic Frameworks via Introduction of −SO3H Groups

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials. However, there are still some major concerns associated with MOFs limiting their commercialization as promising adsorbents for waste-water treatment. The cost, toxicity and regenerability are the major issues to be addressed for MOFs to get insightful results. In this article, we have concise the current strategies to enhance the adsorption capacity of MOFs during the water-treatment for the removal of toxic dyes, pharmaceuticals, and heavy metals. Further, we have also discussed the role of metallic nodes, linkers and associated functional groups for effective removal of toxic water pollutants. In addition to conformist overview, we have critically analyzed the MOFs as adsorbents in terms of toxicity, cost and regenerability. These factors are utmost important to address before commercialization of MOFs as adsorbents for water-treatment. Finally, some future perspectives are discussed to give directions for potential research.

Post-synthesis introduction of dual functional groups in metal-organic framework for enhanced adsorption of moxifloxacin antibiotic

Highly effective removal of antibiotics from aqueous solution is of importance while still faces challenge. Herein, we report a novel metal-organic framework (MOF) adsorbent, MOF-808-SIPA (SIPA, 5-sulfoisophthalic acid), constructed via post-synthesis exchange strategy. On the basis, dual active groups including sulfonic acid and carboxyl groups are successfully introduced. The novel MOF-808-SIPA exhibits a high adsorption capacity of 287.1 mg g^-1 for moxifloxacin hydrochloride (MOX·HCl), superior to that (174.6 mg g^-1) of the pristine MOF-808-AA (AA, acetic acid). Besides, MOF-808-SIPA shows rapid adsorption equilibrium of ∼ 30 min, strong anti-interference ability from pH and inorganic ions, and feasible regeneration. The superiority renders MOF-808-SIPA a potential adsorbent for MOX removal. Density function theory (DFT) calculation and experiment confirm that H-bond interaction contributes largely to the excellent adsorption in MOF-808-SIPA. Our work provides a guideline for designing high-efficiency MOF-based adsorbent.

Construction of Cu-N coordination into natural biopolymer lignin backbone for highly efficient and selective removal of cationic dyes

Here, a Cu²⁺-doped lignin-based adsorbent (Cu-AL) was fabricated via the amination and Cu²⁺-doping of industrial alkali lignin for massive and selective adsorption of cationic dyes azure B (AB) and saffron T (ST). The Cu-N coordination structures endowed Cu-AL with stronger electronegativity and higher dispersity. Through the electrostatic attraction, π-π interaction, H-bonding, and Cu²⁺ coordination, the adsorption capacities of AB and ST reached up to 1168 and 1420 mg g^-1, respectively. The pseudo-second-order model and Langmuir isotherm model were more relevant to the AB and ST adsorption on Cu-AL. Based on the thermodynamic study, the adsorption progresses were endothermic, spontaneous, and feasible. The Cu-AL maintained high removal efficiency to dyes after 4 reuses (>80%). Importantly, the Cu-AL could efficiently remove and separate AB and ST from dye mixtures even in real time. All the above characteristics demonstrated that Cu-AL was an excellent adsorbent for fast wastewater treatment.

Functionalized MoO3 Nanosheets for High-Efficiency RhB Removal

2D nanostructured materials have been applied for water purification in the past decades due to their excellent separation and adsorption performance. However, the functional 2D nanostructured molybdenum trioxide (MoO3)has rarely been reported for the removal of dyes. Here, functionalized MoO3 (F-MoO3) nanosheets are successfully fabricated with a high specific surface area (106 cc g-1) by a one-step mechanochemical exfoliation method as a highly effective adsorbent for removing dyes from water. According to the Raman, X-ray photoelectron spectroscopy, Fourier transform infrared (FTIR), and selected area electron diffraction analysis, functional groups (hdroxyl groups, amide groups, amine groups and amino groups) are identified in the as-prepared F-MoO3 nanosheets. The attached functional groups not only facilitate the dispersal ability of F-MoO3 nanosheets but also enhance the adsorption capacities. Thus, the performance (up to 556 mg g-1 when the initial concentration of Rhodamine B solution is 100 mg L-1) of as-prepared F-MoO3 nanosheets is almost two times higher than other reported MoO3 materials. Furthermore, the FTIR spectra, isotherm, and several factors (e.g., adsorbent dosage and adsorbate dosage) are also systematically investigated to explore the adsorption mechanism. Therefore, this work demonstrates that the F-MoO3 nanosheets are a promising candidate for wastewater treatment.

A new type of calcium-rich biochars derived from spent mushroom substrates and their efficient adsorption properties for cationic dyes

Adsorption is commonly accepted as a most promising strategy in dye wastewater treatment, and the widespread use of adsorption emphasizes the need to explore low-cost but excellent adsorbents. Herein, a low-cost adsorbent (calcium-rich biochar) was developed, which was directly pyrolyzed from spent mushroom substate without any modification. This study evaluated the potential application of two calcium-rich biochars (GSBC and LSBC) derived from spent substrates of Ganoderma lucidum and Lentinus edodes, respectively. The effects of pyrolysis temperature on the calcium-rich biochars characteristics and their adsorption mechanism for cationic dyes (Malachite Green oxalate (MG) and Safranine T (ST)) were studied systematically. The increase in pyrolysis temperature from 350 to 750 °C led to an increase in both biochar ash, Ca content, and specific surface area, which made high-temperature biochars (GS750 and LS750) the superior adsorbents for cationic dyes. Batch adsorption results showed LS750 was more efficient to adsorb dyes than GS750 attributed to its higher Ca content and larger specific surface area. According to the Langmuir model, LS750 had high adsorption capacities of 9,388.04 and 3,871.48 mg g⁻¹ for Malachite green and ST, respectively. The adsorption mechanism of dye MG could be attributed to pore filling, hydrogen bonding, electrostatic interaction, ion exchange, and π-π stacking, while ST adsorption mainly involved pore filling, electrostatic interaction, ion exchange, and π-π stacking. Attributed to their excellent adsorption performance, cheap source, and good reusability, biochars obtained from SMSs were very promising in dyeing wastewater treatment.

Advances in Metal-Organic Frameworks MIL-101(Cr)

MIL-101(Cr) is one of the most well-studied chromium-based metal-organic frameworks, which consists of metal chromium ion and terephthalic acid ligand. It has an ultra-high specific surface area, large pore size, good thermal/chemical/water stability, and contains unsaturated Lewis acid sites in its structure. Due to the physicochemical properties and structural characteristics, MIL-101(Cr) has a wide range of applications in aqueous phase adsorption, gas storage and separation, and catalysis. In this review, the latest synthesis of MIL-101(Cr) and its research progress in adsorption and catalysis are reviewed.

Adsorptive removal of organic dyes via porous materials for wastewater treatment in recent decades: A review on species, mechanisms and perspectives

Organic dyes, a type of high toxic and carcinogenic chemicals that present severe threats to human and aquatic life, are the most commonly seen organic pollutants in wastewater of industries such as textile, rubber, cosmetic industry etc. Various techniques for the removal of dyes are compared in this review. Adsorption has proven to be a facile and promising approach for the removal of dyes in wastewater. This work focuses on the latest development of various porous materials for the adsorption of organic dyes. The characteristics, functionalization and modification of different porous materials are also presented. Furthermore, adsorption behaviors and mechanism of these adsorbents in the adsorption of organic dyes are critically reviewed. Finally, challenges and opportunities for future research in the development of novel materials for the highly efficient removal of dyes are proposed.

Functionally modified metal–organic frameworks for the removal of toxic dyes from wastewater

This review highlights recent advancement in functional modified (FM) MOFs as superior adsorbents for the removal of dyes, classifying them by various modification strategies. The adsorption interactions affected by the FM approach are summarized.

Cellulose citrate: a convenient and reusable bio-adsorbent for effective removal of methylene blue dye from artificially contaminated water

In the present work, we proved the efficacy of cellulose citrate to remove methylene blue (MB) from artificially contaminated water. MB is a widely used dye, but because of its chemical aromatic structure, it is significantly stable with quite slow biodegradation, causing consequent serious health problems for people and significant environmental pollution. Cellulose citrate, the bio-adsorbent proposed and studied by us to remediate water polluted by MB, is produced by a green, cheap and fast procedure that makes use of two abundant natural products, cellulose and citric acid. The average of two citrate groups for each glucose unit of cellulose chains allows this material to have many carboxylic groups available for interaction with the cationic dye. The characterization was carried out through FT-IR, SEM, specific surface area, pore structure parameters and zeta potential. The negative value of the zeta potential at neutral pH is consistent with the affinity of this material for the adsorption of cationic compounds like MB. The activity of the adsorbent at different times, temperatures, pH and concentrations was investigated. The process followed monolayer adsorption typical of the Langmuir model, with a maximum adsorption capacity of 96.2 mg g-1, while for the kinetic studies the process followed a pseudo-second order model. The highest levels of adsorption were reported using solutions of dye with concentrations under 100 mg L-1. The adsorbent can be regenerated several times without a significant loss in the adsorption capacity, and it is not strongly affected by temperature and pH, giving rise to a simple and eco-sustainable procedure for water remediation. Therefore, we conclude that cellulose citrate can be considered as a promising bio-adsorbent for the removal of MB and other cationic pollutants from the environment.

Development of a SPE/GC-MS method for the determination of organophosphorus pesticides in food samples using syringe filters packed by GNP/MIL-101(Cr) nanocomposite

In this study, we report the synthesis and application of a nanocomposite comprising metal-organic framework MIL-101(Cr) and graphene nanopowder (GNP) as a promising sorbent for the extraction of organophosphorus pesticides (OPPs) in juices, water, vegetables and honey samples. A syringe filter, for the first time, was used to host the synthesized nanocomposite and extract the OPPs followed by GC-MS analysis. Different characterization methods including XRD, FTIR, TGA, BET and SEM were employed to confirm the formation of studied nanocomposite. The results indicated that the GNP/MIL-101(Cr) could provide higher capacity for adsorption of OPPs and lower detection limit compared to pristine MIL-101(Cr). The detection limits were 0.005 to 15.0 µg/Kg and the linear range found between 0.05 and 400 µg/Kg. The proposed method showed very good repeatability with the RSD values ranging from 2.9% to 7.1%. The recoveries were between 84% -110% with the spiked levels of 2.0-100.0 µg/Kg.

Adsorptive removal of hazardous organics from water and fuel with functionalized metal-organic frameworks: Contribution of functional groups

The purification of contaminated water and fuel is very important for our sustainability. Adsorptive removal has attracted significant attention because of possible applications in industry and the rapid development of metal-organic frameworks (MOFs), which can be competitive adsorbents. In this review, the possible/competitive purification of water (contaminated with organics) and fuel (composed of S- and N-Containing compounds) via adsorption using MOFs, especially those with various functional groups (FGs), will be discussed. The contribution of FGs such as -OH, -COOH, -SO₃H, -NH₂, and -NH₃⁺ to adsorption/purification will be analyzed in detail, not only to understand the plausible adsorption mechanism but also to utilize specific FGs in adsorption. Moreover, methods for introducing FGs onto MOFs will be summarized. Finally, the prospects for both adsorption/removal and emerging fields will be suggested. Studies for practical applications in industry with shaped MOFs from inexpensive route will be important. The solution pH should be considered for the adsorption of aqueous solution. Applications of MOFs in other fields like storage/delivery and enrichment of analytes might be deeply studied.

1,3-Bis(4′-carboxylatophenoxy)benzene and 3,5-bis(1-imidazoly)pyridine derived Zn(ii)/Cd(ii) coordination polymers: synthesis, structure and photocatalytic properties

Zn(ii) and Cd(ii)-based CPs derived from a 1,3-bis(4′-carboxylatophenoxy)benzene and 3,5-bis(1-imidazoly)pyridine synthesized and their photocatalytic properties for decomposition of methylene blue investigated.

The designed synthesis of a hydrophobic covalent polymer composite to expel toxic dyes and oil from wastewater: theoretical corroboration

In pursuit of addressing a global issue linked to the purification of contaminated water bodies, hydrophobic covalent organic framework (CPCMERI-2020) and its post-synthetically modified composites CPWCS and MS@CPWCS are reported herein.

A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater

Water-borne emerging pollutants are among the greatest concern of our modern society. Many of these pollutants are categorized as endocrine disruptors due to their environmental toxicities. They are harmful to humans, aquatic animals, and plants, to the larger extent, destroying the ecosystem. Thus, effective environmental remediations of these pollutants became necessary. Among the various remediation techniques, adsorption and photocatalytic degradation have been single out as the most promising. This review is devoted to the compilations and analysis of the role of metal-organic frameworks (MOFs) and their composites as potential materials for such applications. Emerging organic pollutants, like dyes, herbicides, pesticides, pharmaceutical products, phenols, polycyclic aromatic hydrocarbons, and perfluorinated alkyl substances, have been extensively studied. Important parameters that affect these processes, such as surface area, bandgap, percentage removal, equilibrium time, adsorption capacity, and recyclability, are documented. Finally, we paint the current scenario and challenges that need to be addressed for MOFs and their composites to be exploited for commercial applications.

Unique and efficient adsorbents for highly selective and reverse adsorption and separation of dyes via the introduction of SO3H functional groups into a metal–organic framework

In this study, an unsaturated Cu-based MOF, HKUST (Cu₃(BTC)₂), was fabricated and modified with sulfonate groups in two steps, leading to the construction of a novel sulfo-functionalized MOF. The prepared framework was utilized in the adsorption and separation of various organic dyes (MB, Er, FS, and MV). The adsorption process represented intriguing features due to the introduction of the SO₃H functional groups into the framework. Such an attractive feature has rarely been depicted in previous works. In addition to the substantially increased adsorption capacity of the modified framework compared with that of pristine MOF, a reverse and selective phenomenon was perceived in the cases of FS and MV. The sulfo-functionalized MOF could adsorb MV with high adsorption capacity but barely adsorbed FS, and the opposite condition was observed for pristine MOF. In addition, the prepared framework showed high selectivity in a mixed solution of dyes. On the other hand, the modified framework had no role in the first step of the adsorption and separation process and showed the same behavior as pristine MOF. Furthermore, the sulfonate functional groups could not be directly incorporated into HKUST. The experimental data followed the pseudo-second-order kinetics and the Langmuir isotherm model. Thermodynamic studies demonstrated an exothermic spontaneous mechanism for the dye adsorption process. The prepared adsorbents were capable of being recycled for four sequential cycles. Hereupon, this study presents a notably efficacious approach for the reverse performance of frameworks for the dye adsorption and separation process.

A novel sulfo-functionalized MOF was utilized as an efficient adsorbent for a reversal in the removal and selective separation of dyes from contaminated water.

A novel sustainable metal organic framework as the ultimate aqueous phase sensor for natural hazards: detection of nitrobenzene and F− at the ppb level and rapid and selective adsorption of methylene blue

A novel metal organic framework (MOF) exhibits good aqueous phase sensing properties towards nitrobenzene and fluoride anions and selective adsorption/separation ability for methylene blue.

Electrochemical degradation of safranine T in aqueous solution by Ti/PbO2 electrodes

The electrochemical degradation of safranine T (ST) in aqueous solution was studied. The effects of current density, initial concentration of ST, initial pH values, and Na2SO4 concentration on electrocatalytic degradation of ST in the aqueous solution by Ti/PbO2 electrode were analyzed. The experimental results showed that the electrochemical oxidization reaction of ST fitted a pseudo first order kinetics model. By using the Ti/ PbO2 electrode as the anode, 99.96% of ST can be eliminated at 120 min. It means that the electrochemical degradation of ST in aqueous solution by the Ti/PbO2 electrode was very effective. The optimal reaction conditions were as follows: current density, 40 mA cm−2; initial ST concentration, 100 mg L−1; Na2SO4 concentration, 0.20 mol L−1; initial pH, 6. It can be known from the test of UV–vis and HPLC in the reaction process that the intermediates will be generated, and the possible intermediate structure was studied by HPLC–MS test. However, with the progress of degradation reaction, the intermediates will eventually be oxidized into CO2 and H2O. Cyclic voltammetry and fluorescence experiments proved that ST was indirectly oxidized through the generation of hydroxyl radicals. Under the optimal reaction conditions, the energy required to completely remove ST was 17.92 kWh/m3.

Removal of anthracene in water by MIL-88(Fe), NH2-MIL-88(Fe), and mixed-MIL-88(Fe) metal-organic frameworks

Three adsorbents based on the metal-organic frameworks (MOFs), viz.; MIL-88(Fe), NH2-MIL-88(Fe), and mixed-MIL-88(Fe) were synthesized using a microwave-assisted solvothermal technique. The as-synthesized MOFs were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field emission scanning microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). The MOFs were shown to possess highly crystalline and porous structures with specific surface areas of 1240, 941, and 1025 m2 g-1 and pore volumes of 0.7, 0.6 and 0.6 m3 g-1 for MIL-88(Fe), NH2-MIL-88(Fe) and mixed-MIL-88(Fe), respectively. Faster removal of a model polycyclic aromatic hydrocarbon, anthracene (ANT) within 25 minutes, was achieved when these MOFs were used as adsorbents in water. The removal efficiency was 98.3, 92.4 and 95.8% for MIL-88(Fe), NH2-MIL-88(Fe) and mixed-MIL-88(Fe), respectively. The kinetics and isotherms of the process were best statistically described by pseudo-second-order and Langmuir models, respectively, while the thermodynamic studies revealed the exothermic and spontaneous nature of the process. Docking simulations were found to be consistent with the experimental results with MIL-88(Fe) showing the best binding capacity with the ANT molecule.

Efficient separation of vitamins mixture in aqueous solution using a stable zirconium-based metal-organic framework

High-efficiency separation of niacin (NIA) and nicotinamide (NIC) still faces large challenge up to date. In this work, a stable zirconium-based metal-organic framework (DUT-67) was used to adsorb and separate NIA and NIC in aqueous solutions. The adsorption capacities for NIA and NIC at the concentration ratio of 1:1 were 110.2 mg g^-1 and 11.2 mg g^-1, respectively. Further study indicates that low ratio of NIA/ NIC is in favor of the separation. High temperature can restrain the adsorptions of NIA and NIC but promote the separation. Besides, DUT-67 can be well regenerated via a simple method. Mechanism analysis indicates that electrostatic interaction plays a critical role in the separation of these vitamins.

Amino Acid Imprinted UiO-66s for Highly Recognized Adsorption of Small Angiotensin-Converting-Enzyme-Inhibitory Peptides

Introduction of targeted defects into microporous UiO-66s for manipulating their three-dimensional size and surface properties can endow them with adsorption and separation areas involving angiotensin-converting-enzyme-inhibitory (ACE-inhibitory) peptides. Three hydrophobic amino acids (AAs) (i.e., proline (Pro), phenylalanine (Phe), and tryptophan (Trp)) having different physical/chemical properties were applied to in situ tailor defects in UiO-66 through targeted incoordination of missing linkers or missing nodes. Characterization results revealed a uniform oval shape of the developed defects with lengths ranging from 1.8 to 3.1 nm, which was also highly consistent with our molecular simulation. Among these three defective UiO-66s, Phe and Trp imprinted UiO-66s significantly promoted the adsorption affinity of small ACE-inhibitory peptides (uptake: 1.25 mmol g^-1 for DDFF and 1.37 mmol g^-1 for DDWW) and ultrahigh selectivity for DDFF (249) or DDWW (279) from inactive KKKK solution based on a lock-and-key mechanism. As a result, the imprinted UiO-66 showed an enrichment capacity for ACE-inhibitory peptides about eight times higher than that of pristine UiO-66. Therefore, the amino acid imprinting strategy endorsed by its facile and discerning ability can be envisioned to be of great value for small functional peptide separation and oriented enrichment in biomedicines.

Metal-organic frameworks/carbon-based materials for environmental remediation: A state-of-the-art mini-review

In recent years, many research groups started to study the combination of metal-organic frameworks (MOFs) with nanocarbon materials, which showed the excellent improved performances than MOFs alone. The addition of carbon materials such as graphene oxides (GOs) and carbon nanotubes (CNTs) into MOFs can improve the physico-chemical properties of parent MOFs with excellent chemical robustness, high mechanical and distinguished electronic thermal robustness. These advantages facilitate the wider applications of MOFs/carbon materials (MOFs-C) in more research fields. This paper is devoted to reviewing the recent studies about the preparation and applications of MOFs-C in environmental remediation. This paper discusses the efficient adsorptive removal of a wide range of pollutants by MOFs-C, including organic contaminants and heavy metals from water as well as VOCs and some other toxic gases from atmospheric environment. Additionally, the catalytic performance of these nanocomposites for photocatalysis and Fenton-like oxidation of water pollutants is discussed in details. Meanwhile, the significant roles of nanocarbons and in-depth mechanisms for improved adsorption or catalysis are summarized. Finally, future perspectives on the development and application of MOFs-C composites for pollution remediation are presented at the end of this paper.

Trifunctional metal–organic platform for environmental remediation: structural features with peripheral hydroxyl groups facilitate adsorption, degradation and reduction processes

A Cd(ii)-based metal–organic framework (MOF) has been demonstrated to have trifunctional properties, namely as an efficient and selective adsorbent for dyes, a visible-light-active photocatalyst for the degradation of dyes and a photocatalyst for Cr(vi) reduction.

Removal of Acid Orange 7 from Aqueous Solution by Metal-Organic Frameworks

We investigated the removal of a harmful anionic dye, acid orange 7 (AO7), from aqueous solution using metal-organic frameworks (MOFs). We prepared four different MOFs (ZIF-8, ZIF-67, UiO-66, UiO-66-NH2) by solvothermal reactions and then tested their adsorption of AO7. Infrared spectra and adsorption capacity data confirmed the removal of AO7 from aqueous solution. The factors we investigated affecting adsorption capacity include variation of the organic linkers and metal clusters of the MOFs. Our results suggest that the hydrogen bonding, π–π interactions, and zeta potentials facilitate the removal of AO7 from water. Of the four MOFs examined, ZIF-67 exhibited the highest adsorption capacity of AO7 and can be regenerated easily.