Development of Potassium- and Sodium-Promoted CaO Adsorbents for CO2 Capture at High Temperatures

Potassium-Promoted Limestone for Preferential Direct Hydrogenation of Carbonates in Integrated CO2 Capture and Utilization

Integrated CO2 capture and utilization (ICCU) via the reverse water-gas shift (RWGS) reaction offers a particularly promising route for converting diluted CO2 into CO using renewable H2. Current ICCU-RWGS processes typically involve a gas-gas catalytic reaction whose efficiency is inherently limited by the Le Chatelier principle and side reactions. Here, we show a highly efficient ICCU process based on gas-solid carbonate hydrogenation using K promoted CaO (K-CaO) as a dual functional sorbent and catalyst. Importantly, this material allows ∼100% CO2 capture efficiency during carbonation and bypasses the thermodynamic limitations of conventional gas-phase catalytic processes in hydrogenation of ICCU, achieving >95% CO2-to-CO conversion with ∼100% selectivity. We showed that the excellent functionalities of the K-CaO materials arose from the formation of K2Ca(CO3)2 bicarbonates with septal K2CO3 and CaCO3 layers, which preferentially undergo a direct gas-solid phase carbonates hydrogenation leading to the formation of CO, K2CO3 CaO and H2O. This work highlights the immediate potential of K-CaO as a class of dual-functional material for highly efficient ICCU and provides a new rationale for designing functional materials that could benefit the real-life application of ICCU processes.

The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation

Ni/CaO, a low-cost dual-functional material (DFM), has been widely studied for integrated CO2 capture and hydrogenation. The core of this dual-functional material should possess both good CO2 capture-conversion performance and structural stability. Here, we synthesized Ni/CaO DFMs modified with alkali metals (Na, K, and Li) through a combination of precipitation and combustion methods. It was found that Na-modified Ni/CaO (Na-Ni/CaO) DFM offered stable CO2 capture-conversion activity over 20 cycles, with a high CO2 capture capacity of 10.8 mmol/g and a high CO2 conversion rate of 60.5% at the same temperature of 650 °C. The enhanced CO2 capture capacity was attributed to the improved surface basicity of Na-Ni/CaO. In addition, the incorporation of Na into DFMs had a favorable effect on the formation of double salts, which shorten the CO2 capture and release process and promoted DFM stability by hindering their aggregation and the sintering of DFMs.

Olive Mill Wastewater Valorization through Steam Reforming Using Multifunctional Reactors: Challenges of the Process Intensification

Olive oil mill wastewater (OMW) is a polluting stream derived from the production of olive oil and is a source of environmental pollution; this is relevant in many countries around the world, but particularly in all the Mediterranean region where major producers are located. In this effluent, several pollutants are present—namely, sugars, fatty acids, and polyphenols, among others. Nowadays, to reduce the pollutant load, several treatment techniques are applied, but these technologies have numerous cost and efficiency problems. For this reason, the steam reforming of the OMW (OMWSR) presents as a good alternative, because this process decreases the pollutant load of the OMW and simultaneously valorizes the waste with the production of green H2, which is consistent with the perspective of the circular economy. Currently, the OMWSR is an innovative treatment alternative in the scientific field and with high potential. In the last few years, some groups have studied the OMWSR and used innovative reactor configurations, aiming to improve the process’ effectiveness. In this review, the OMW treatment/valorization processes, the last developments on catalysis for OMWSR (or steam reforming of similar species present in the effluent), as well as the last advances on OMWSR performed in multi-functional reactors are addressed.

Influence of Vacancy Defects of the Calcium Oxide Surface on the Nonequilibrium Phase Transition of Alkali Metal Salts

Molten alkali metal salt effectively promotes the performance of calcium looping (CaL). Deep insight into the nonequilibrium phase-transition characteristic of alkali metal salt is better for the control of the temperature in CaL, which not only ensures the complete melting of metal salt but also prevents the reaction from inhibiting caused by higher temperatures. In this work, therefore, the molecular dynamics simulation method is used to explore the nonequilibrium phase-transition characteristic of Na₂SO₄. The results show that the equilibrium melting temperature of nanosodium sulfate on the calcium oxide surface is 810 K, which is lower than the macroscopic melting temperature. Meanwhile, the high heating rates led to the atoms in Na₂SO₄ unable to break through the thermal stability limit, resulting in overheating of the crystal. Both the surface premelting and overheating melting temperature of the crystal are increased. When the heating rates are 0.25, 0.5, and 1.0 K/ps, the overheating melting temperatures are 845, 885, and 930 K, respectively. More than that, the surface defects enhance the interaction between CaO and Na₂SO₄ because of the surface being charged. The increases in the interaction not only effectively break the stability of the crystal lattice of Na₂SO₄ on the defective surfaces but also promote the energy transport inside Na₂SO₄. Therefore, as the defect concentration increases from 0 to 3% and 5%, the overheating melting temperature of Na₂SO₄ gradually decreases from 845 to 836 and 815 K.

CO2 Capture at Medium to High Temperature Using Solid Oxide-Based Sorbents: Fundamental Aspects, Mechanistic Insights, and Recent Advances

Carbon dioxide capture and mitigation form a key part of the technological response to combat climate change and reduce CO₂ emissions. Solid materials capable of reversibly absorbing CO₂ have been the focus of intense research for the past two decades, with promising stability and low energy costs to implement and operate compared to the more widely used liquid amines. In this review, we explore the fundamental aspects underpinning solid CO₂ sorbents based on alkali and alkaline earth metal oxides operating at medium to high temperature: how their structure, chemical composition, and morphology impact their performance and long-term use. Various optimization strategies are outlined to improve upon the most promising materials, and we combine recent advances across disparate scientific disciplines, including materials discovery, synthesis, and in situ characterization, to present a coherent understanding of the mechanisms of CO₂ absorption both at surfaces and within solid materials.

Mechanistic Understanding of CaO-Based Sorbents for High-Temperature CO2 Capture: Advanced Characterization and Prospects

Carbon dioxide capture and storage technologies are short to mid-term solutions to reduce anthropogenic CO₂ emissions. CaO-based sorbents have emerged as a viable class of cost-efficient CO₂ sorbents for high temperature applications. Yet, CaO-based sorbents are prone to deactivation over repeated CO₂ capture and regeneration cycles. Various strategies have been proposed to improve their cyclic stability and rate of CO₂ uptake including the addition of promoters and stabilizers (e. g., alkali metal salts and metal oxides), as well as nano-structuring approaches. However, our fundamental understanding of the underlying mechanisms through which promoters or stabilizers affect the performance of the sorbents is limited. With the recent application of advanced characterization techniques, new insight into the structural and morphological changes that occur during CO₂ uptake and regeneration has been obtained. This review summarizes recent advances that have improved our mechanistic understanding of CaO-based CO₂ sorbents with and without the addition of stabilizers and/or promoters, with a specific emphasis on the application of advanced characterization techniques.

Na2CO3-modified CaO-based CO2 sorbents: the effects of structure and morphology on CO2 uptake

TGA, Na K-edge XAS and FIB-SEM allowed us to understand the degradation of the CO₂ uptake of Na₂CO₃-modified CaO CO₂ sorbents.