Ion-Exchanged Zeolites Y for Selective Adsorption of Methyl Mercaptan from Natural Gas: Experimental Performance Evaluation and Computational Mechanism Explorations

Management of methyl mercaptan contained in waste gases - an overview

Methyl mercaptan is a typical volatile organosulfur pollutant contained in many gases emitted by urban waste treatment, various industries, natural gas handling, refining processes, and energy production. This work is a comprehensive overview of the scientific and practical aspects related to the management of methyl mercaptan pollution. The main techniques, including absorption, adsorption, oxidation, and biological treatments, are examined in detail. For each method, its capability as well as the technical advantages and drawbacks have been highlighted. The emerging methods developed for the removal of methyl mercaptan from natural gas are also reviewed. These methods are based on the catalytic conversion of CH3SH to hydrocarbons and H2S.

Structural/surface characterization of transition metal element-doped H-ZSM-5 adsorbent for CH3SH removal: identification of active adsorption sites and deactivation mechanism

CH3SH is a potential hazard to both chemical production and human health, so controlling its emissions is an urgent priority. In this work, a series of transition metal-loaded H-ZSM-5 adsorbents (Si/Al = 25) (Cu, Fe, Co, Ni, Mn, and Zn) were synthesized through the wet impregnation method and tested for CH3SH physicochemical adsorption at 60 °C. It was shown that the Cu-modified H-ZSM-5 adsorbent was much more active for CH3SH removal due to its abundant strong acid sites than other transition metal-modified H-ZSM-5 adsorbents. The detailed physicochemical properties of various modified H-ZSM-5 adsorbents were characterized by SEM, XRD, N2 physisorption, XPS, H2-TPR, and NH3-TPD. The effects of metal loading mass ratio, calcination temperature, and acid or alkali modification on the performance of the adsorbent were also investigated, and finally 20% Cu/ZSM-5 was found to have the best adsorption capacity after calcined at 350 °C. Additionally, the Cu/ZSM-5 adsorbent modified by sodium bicarbonate could expose more active components, which improved the adsorbent's stability. However, the consumption and reduction of the active component Cu2+ and the accumulation of sulfate during the adsorption process are the main reasons for the deactivation of the adsorbent. In addition, the simultaneous purging of N2 + O2 can effectively restore the adsorption capacity of the deactivated adsorbent and can be used as a potential strategy to regenerate the adsorbent.

Accessibility control of Cu sites to enhance adsorption capacity of ultra-low-concentration methyl mercaptan

Methyl mercaptan (MM) is a typical malodorous gas and low-concentration MM makes human uncomfortable. Adsorption is applied in industry to remove MM. However, adsorptive-site agglomeration results in that adsorbent is not fully utilized. In this work, pore size and unsaturated-site amount of Cu-based metal-organic frameworks (MOFs) were regulated by using different ligands to increase adsorptive-site accessibility for MM. As a result, when Cu²⁺ sites were imbedded in MOFs network, these sites were inaccessible for MM; when Cu²⁺ sites were occupied by none-network organics, these sites were accessible for MM after simple activation; when Cu²⁺ sites were occupied by water, these sites were the most effective for MM removal among above site species. Furthermore, with the increase of bonding sites in ligands, channel pore size of MOFs was increased. Both pore size and unsaturated-site amount were important to MM removal. When above MOFs were used in purification of ultra-low-concentration MM, the regulated MOFs with a big pore size (11 and 5 Å) and water-occupied sites showed a best removal capacity of 160.3 mg g^-1. The main result of this work is in favor of understanding structure-efficiency relationship in MOFs. This work also helps to develop effective adsorbents for ultra-low-concentration pollutants.

Adsorption and Separation of Ethyl Mercaptan from Methane by Hydroxyl Groups on the Surface of HTiNbO5-Nanosheets

Adsorption and separation of light mercaptan (R-SH, R = C₁-C₄) from methane gas can effectively improve the utilization efficiency of methane and the resource conversion of organic sulfide. To further investigate the effects of composition and structural characteristics of laminates on desulfurization performance, in this paper, a two-dimensional (2D) HTiNbO₅-nanosheet (HTiNbO₅-NS) was constructed. In addition, the hydrogen-bonding interaction between the exposed hydroxyl active sites on the surface of HTiNbO₅-NS and ethyl mercaptan (Et-SH) was constructed to realize the adsorption and separation of Et-SH from methane gas. The breakthrough adsorption capacity (C_ap (BT)) of HTiNbO₅-NS is 14.35 mg·g^-1 in a micro fixed bed with a space velocity of 6000 h^-1. The regeneration desulfurization rate (q) of the 10-cycle regeneration adsorption was ca. 96%. Furthermore, density functional theory (DFT) calculation results show that the S atoms of Et-SH and HTiNbO₅-NS with the terminal hydroxyl and bridge hydroxyl have electron cloud covering to form the hydrogen-bonding interaction. In addition, the formation details of this hydrogen-bond interaction are discussed. The effects of Ti on the microstructure, hydroxyl acid, hydroxyl content, surface area, and pore volume of nanosheets were studied to explain the reasons for the differences in the properties of the two kinds of nanosheets. This work broadens the design of 2D niobium-based efficient adsorbents for R-SH based on hydrogen-bonding interaction and is helpful to enrich the application of the hydrogen-bonding interaction.