Simplified First-Principles Model of a Compact Flotation Unit for Use in Optimization and Control

Separation of emulsified crude oil from produced water by gas flotation: A review

The development and production of oil and gas fields would eventually result in a considerable amount of oily generated water, posing serious risks to humans and the environment. Nowadays, the oil concentration in the drainage stream of the produced water is strictly regulated, and many countries have established strict emission standards. As an indispensable oily wastewater treatment technology, flotation technology has attracted much attention because of its maturity, economy, practicality, and relative efficiency. Firstly, this paper summarizes and compares flotation techniques, such as dissolved gas flotation, induced gas flotation, electroflotation, and compact flotation units widely used in produced water treatment offshore in recent years. Considering the complexity of the mechanism of oil removal by air flotation, the mechanism of the oil droplet-bubble interaction is further discussed. The effects of flocculant, PH, and salinity on the oil droplet-bubble interaction in the flotation process were summarized from the perspective of the microscopic colloidal interface, which has a specific guiding role in improving the oil removal efficiency in the gas flotation process. Finally, the research status of produced water treatment by air flotation is summarized, and the feasible research direction is put forward.

Enhanced oil removal from oily sand by injecting micro-macrobubbles in swirl elution

Environmental contamination by petroleum hydrocarbons was exacerbated by oil pipeline breaks, marine oil spills and discharges from industrial production. To further improve the removal performance of petroleum hydrocarbons in solid particles, the deoiling experiments of swirl elution with micro-macrobubbles on oily sands were carried out in this paper. Experiment results indicated that when particles fell from the center of the bubble, the collision efficiency was 99.3%. The instantaneous contact angle (ICA) between the macrobubbles and the oil layer was improved in the presence of microbubbles. Furthermore, the maximum ICA of bubbles attaching to the oil layer was found to occur at pH 9 in the system of oily sand mixtures ranging from pH 5 to pH 14. This finding indicated that the slightly alkaline solution was more advantageous for bubbles to attach to the oil layer than the highly alkaline solution. The optimum condition for the elution of oily sand in the mixture of pH 7-14 was pH 12, and the oil removal efficiency was 85.4% for 10 min. The oil removal efficiency of swirl elution (SE) with bubbles on oily sand at pH 12 for 10 min was superior to either SE without bubbles or air flotation (AF). The results show that the swirl elution with bubbles can effectively enhance the oil removal efficiency of oily sands and provide guidance for controlling the environmental petroleum hydrocarbon contamination and reducing the usage of surfactants.