Porosity Modulation in Two-Dimensional Covalent Organic Frameworks Leads to Enhanced Iodine Adsorption Performance

Large-pore covalent organic framework as solid phase extraction absorbentforefficientdetermination of polypeptide antibiotics in animal-derived foods

The precise determination of polypeptide antibiotics (PPTs) in foods has been always challenging because of the interference of various endogenous peptides in complex matrix. Herin, a novel large-pore covalent organic framework (TABPT-SPDA-COF) with accessible pore size of 7.9 nm was synthesized as a solid phase extraction (SPE) absorbent for efficiently enriching four PPTs existed in foods originating from animals. The parameters of SPE process were systematically optimized. Subsequently, four PPTs were determined by UHPLC-MS/MS. Under the optimal conditions, TABPT-SPDA-COF shows outstanding enrichment capacity for PPTs in contrast to commercial absorbents ascribed to size selectivity and multiple interaction effects. The method exhibits excellent linear range (0.005-100 ng mL-1), satisfactory limits of detection (0.1 pg mL-1) as well as relative recoveries (86.2-116 %). This work offers a practicable platform to monitor trace PPTs from complex animal-derived foodstuffs.

Synergistic Linker and Linkage of Covalent Organic Frameworks for Enhancing Gold Capture

The tunable pore walls and skeletons render covalent organic frameworks (COFs) as promising absorbents for gold (Au) ion. However, most of these COFs suffered from low surface areas hindering binding sites exposed and weak binding interaction resulting in sluggish kinetic performance. In this study, COFs have been constructed with synergistic linker and linkage for high-efficiency Au capture. The designed COFs (PYTA-PZDH-COF and PYTA-BPDH-COF) with pyrazine or bipyridine as linkers showed high surface areas of 1692 and 2076 m2 g‒1, providing high exposed surface areas for Au capture. In addition, the Lewis basic nitrogen atoms from the linkers and linkages are easily hydronium, which enabled to fast trap Au via coulomb force. The PYTA-PZDH-COF and PYTA-BPDH-COF showed maximum Au capture capacities of 2314 and 1810 mg g-1, higher than other reported COFs. More importantly, PYTA-PZDH-COF are capable of rapid adsorption kinetics with achieving 95% of maximum binding capacity in 10 min. The theoretical calculation revealed that the nitrogen atoms in linkers and linkages from both COFs are simultaneously hydronium, and then the protonated PYTA-PZDH-COF are more easily binding the AuCl4 ‒, further accelerating the binding process. This study gives the a new insight to design COFs for ion capture.

Porous isoreticular non-metal organic frameworks

Metal-organic frameworks (MOFs) are useful synthetic materials that are built by the programmed assembly of metal nodes and organic linkers1. The success of MOFs results from the isoreticular principle2, which allows families of structurally analogous frameworks to be built in a predictable way. This relies on directional coordinate covalent bonding to define the framework geometry. However, isoreticular strategies do not translate to other common crystalline solids, such as organic salts3-5, in which the intermolecular ionic bonding is less directional. Here we show that chemical knowledge can be combined with computational crystal-structure prediction6 (CSP) to design porous organic ammonium halide salts that contain no metals. The nodes in these salt frameworks are tightly packed ionic clusters that direct the materials to crystallize in specific ways, as demonstrated by the presence of well-defined spikes of low-energy, low-density isoreticular structures on the predicted lattice energy landscapes7,8. These energy landscapes allow us to select combinations of cations and anions that will form thermodynamically stable, porous salt frameworks with channel sizes, functionalities and geometries that can be predicted a priori. Some of these porous salts adsorb molecular guests such as iodine in quantities that exceed those of most MOFs, and this could be useful for applications such as radio-iodine capture9-12. More generally, the synthesis of these salts is scalable, involving simple acid-base neutralization, and the strategy makes it possible to create a family of non-metal organic frameworks that combine high ionic charge density with permanent porosity.

Highly Efficient Capture of Volatile Iodine by Conjugated Microporous Polymers Constructed Using Planar 3- and 4-Connected Organic Monomers

The effective capture and recovery of radioiodine species associated with nuclear fuel reprocessing is of significant importance in nuclear power plants. Porous materials have been proven to be one of the most effective adsorbents for the capture of radioiodine. In this work, we design and synthesize a series of conjugated microporous polymers (CMPs), namely, TPDA-TFPB CMP, TPDA-TATBA CMP, and TPDA-TECHO CMP, which are constructed based on a planar rectangular 4-connected organic monomer and three triangular 3-connected organic monomers, respectively. The resultant CMPs are characterized using various characterization techniques and used as effective adsorbents for iodine capture. Our experiments indicated that the CMPs exhibit excellent iodine adsorption capacities as high as 6.48, 6.25, and 6.37 g g-1 at 348 K and ambient pressure. The adsorption mechanism was further investigated and the strong chemical adsorption between the iodine and the imine/tertiary ammonia of the CMPs, 3D network structure with accessible hierarchical pores, uniform micromorphology, wide π-conjugated structure, and high-density Lewis-base sites synergistically contribute to their excellent iodine adsorption performance. Moreover, the CMPs demonstrated good recyclability. This work provides guidance for the construction of novel iodine adsorbent materials with high efficiency in the nuclear power field.

A New Porphyrin-based Covalent Organic Framework with High Iodine Capture Capacity and I-doping Enhanced Conductivity

Covalent organic frameworks (COFs) are porous organic materials with well-defined and uniform structure. The material is an excellent candidate as a solid adsorbent for iodine adsorption. In the present study, we report the synthesis of COF with porphyrin moiety, TF-TA-COF, by solvothermal reaction, which was characterized by XRD, solid-state 13 C NMR, IR, TGA, and nitrogen adsorption-desorption analysis. TF-TA-COF showed a high specific surface area of 443 m2  g-1 , and exhibited good adsorption performance for iodine vapor, with an adsorption capacity of 2.74 g g-1 . XPS and Raman spectrum indicated that a hybrid of physisorption and chemisorption took place between host COF and iodine molecules. The electric properties of iodine-loaded TF-TA-COF were also studied. After doped with iodine, the conductivity of the material increased by more than 5 orders of magnitude. The photoconductivity of I2 -doped COF was also studied and TF-TA-COF showed doping-enhanced photocurrent generation.

Quinoline Bridging Hyperconjugated Covalent Organic Framework as Solid-Phase Microextraction Coating for Ultrasensitive Determination of Phthalate Esters in Water Samples

Phthalate esters (PAEs) are widely distributed in the environment, and this has caused serious health and safety concerns. Development of rapid and ultrasensitive identification and analysis methods for phthalate esters is urgent and highly desirable. In this work, a novel nitrogen-rich covalent organic framework (N-TTI) derived quinoline bridging covalent organic framework (N-QTTI) was fabricated and used as a solid-phase microextraction (SPME) coating for the ultrasensitive determination of phthalate esters in water samples. The physical and chemical properties of N-QTTI were investigated sufficiently. The N-QTTI-coated fiber demonstrates a superior enrichment performance than either the N-TTI-coated fiber or commercial fibers under the optimized SPME conditions. For the first time, we propose a semi-immersion strategy for the extraction of PAEs from water samples based on N-QTTI-coated SPME fibers. Combined with gas chromatography-mass spectrometry (GC-MS), the developed method N-QTTI-SPME-GC-MS exhibits a wide linear range with a satisfactory linearity (R2 ≥ 0.995). The limits of detection (LOD, S/N = 3) and the limits of quantification (LOQs, S/N = 10) were 0.17-1.70 and 0.57-5.60 ng L-1, respectively. The repeatability of the new method was examined using relative standard deviations (RSDs) between intraday and interday data, which were 0.38-7.98% and 1.22-6.60%, respectively. The spiked recoveries at three levels of 10, 100, and 1000 ng L-1 were in the range of 90.0-106.2% with RSDs of less than 7.48%. The enrichment factors ranged from 291 to 17180. When compared to previously published works, the LODs of the newly established method were improved 5-5400 times, and the enrichment factors were increased by at least 8 times. The absorption mechanism was investigated by X-ray photoelectron spectroscopy and noncovalent interaction force analysis. The technique was successfully employed for detecting PAEs in water samples.

Structural Modulation of Nitrogen-Rich Covalent Organic Frameworks for Iodine Capture

Developing efficient adsorbent materials for iodine scavenging is essential to mitigate the threat of radioactive iodine causing adverse effects on human health and the environment. In this context, we explored N-rich two-dimensional covalent organic frameworks (COFs) with diverse functionalities for iodine capture. The pyridyl-hydroxyl-functionalized triazine-based novel 5,5',5″-(1,3,5-triazine-2,4,6-triyl)tris(pyridine-2-amine) (TTPA)-COF possesses high crystallinity (crystalline domain size: 24.4 ± 0.6 nm) and high porosity (specific BET surface area: 1000 ± 90 m2 g-1). TTPA-COF exhibits superior vapor-phase iodine adsorption (4.43 ± 0.01 g g-1) compared to analogous COF devoid of pyridinic moieties, 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT)-COF. The high iodine capture by TTPA-COF is due to the enhanced binding affinity conferred by the extra pyridinic active sites. Furthermore, the crucial role of long-range order in porous adsorbents has been experimentally evidenced by comparing the performance of iodine vapor capture of TTPA-COF with an amorphous network polymer having identical functionalities. We have also demonstrated the high iodine scavenging ability of TTPA-COF from the organic and aqueous phases. The mechanism of iodine adsorption by the heteroatom-rich framework is elucidated through FTIR, XPS, and Raman spectral analyses. The present study highlights the need for structural tweaking of the building blocks toward the rational construction of advanced functional porous materials for a task-specific application.

Quinoid-Thiophene-Based Covalent Organic Polymers for High Iodine Uptake: When Rational Chemical Design Counterbalances the Low Surface Area and Pore Volume

A novel 2D covalent organic polymer (COP), based on conjugated quinoid-oligothiophene (QOT) and tris(aminophenyl) benzene (TAPB) moieties, is designed and synthesized (TAPB-QOT COP). Some DFT calculations are made to clarify the equilibrium between different QOT isomers and how they could affect the COP formation. Once synthetized, the polymer has been thoroughly characterized by spectroscopic (i.e., Raman, UV-vis), SSNMR and surface (e.g., SEM, BET) techniques, showing a modest surface area (113 m² g^-1) and micropore volume (0.014 cm³ g^-1 with an averaged pore size of 5.6-8 Å). Notwithstanding this, TAPB-QOT COP shows a remarkably high iodine (I₂) uptake capacity (464 %wt) comparable to or even higher than state-of-the-art porous organic polymers (POPs). These auspicious values are due to the thoughtful design of the polymer with embedded sulfur sites and a conjugated scaffold with the ability to counterbalance the relatively low pore volumes. Indeed, both morphological and Raman data, supported by computational analyses, prove the very high affinity between the S atom in our COP and the I₂. As a result, TAPB-QOT COP shows the highest volumetric I₂ uptake (i.e., the amount of I₂ uptaken per volume unit) up to 331 g cm^-3 coupled with a remarkably high reversibility (>80% after five cycles).

Regulating π-Conjugation in sp2 -Carbon-Linked Covalent Organic Frameworks for Efficient Metal-Free CO2 Photoreduction with H2 O

The development of sp² -carbon-linked covalent organic frameworks (sp² c-COFs) as artificial photocatalysts for solar-driven conversion of CO₂ into chemical feedstock has captured growing attention, but catalytic performance has been significantly limited by their intrinsic organic linkages. Here, a simple, yet efficient approach is reported to improve the CO₂ photoreduction on metal-free sp² c-COFs by rationally regulating their intrinsic π-conjugation. The incorporation of ethynyl groups into conjugated skeletons affords a significant improvement in π-conjugation and facilitates the photogenerated charge separation and transfer, thereby boosting the CO₂ photoreduction in a solid-gas mode with only water vapor and CO₂ . The resultant CO production rate reaches as high as 382.0 µmol g^-1  h^-1 , ranking at the top among all additive-free CO₂ photoreduction catalysts. The simple modulation approach not only enables to achieve enhanced CO₂ reduction performance but also simultaneously gives a rise to extend the understanding of structure-property relationship and offer new possibilities for the development of new π-conjugated COF-based artificial photocatalysts.

Flexible three-dimensional diacetylene functionalized covalent organic frameworks for efficient iodine capture

The construction of functionalized covalent organic frameworks (COFs) is of great significance for broadening their potential applications, but is yet challenging to achieve, especially for three-dimensional (3D) COFs, because the connection of the building organic skeleton must strictly follow the pre-designed topology. Here we present the synthesis of two diamondyne-like 3D COFs (CPOF-2 and CPOF-3) functionalized with acetylene (-CC-) and diacetylene (-CC-CC-), respectively. The obtained COFs show a high crystallinity, permanent porosity, and chemical stability. Furthermore, CPOF-3 exhibited an extremely high volatile iodine uptake (as high as 5.87 g g^-1), much higher than that of most reported COF-based adsorbents for iodine capture. Therefore, this study provides a new design principle to obtain high-performance iodine loading porous materials to solve the environmental pollution problem caused by radioactive iodine in the waste of the nuclear industry.

Molecular Iodine Capture by Covalent Organic Frameworks

The effective capture and storage of volatile molecular iodine from nuclear waste is of great significance. Covalent organic frameworks (COFs) are a class of extended crystalline porous polymers that possess unique architectures with high surface areas, long-range order, and permanent porosity. Substantial efforts have been devoted to the design and synthesis of COF materials for the capture of radioactive iodine. In this review, we first introduce research techniques for determining the mechanism of iodine capture by COF materials. Then, the influencing factors of iodine capture performance are classified, and the design principles and strategies for constructing COFs with potential for iodine capture are summarized on this basis. Finally, our personal insights on remaining challenges and future trends are outlined, in order to bring more inspiration to this hot topic of research.

Highly efficient and stable catalysts-covalent organic framework-supported palladium particles for 4-nitrophenol catalytic hydrogenation

A covalent organic framework (COF) was used as the support of the catalyst in this work in order to obtain an environmentally friendly catalyst with high catalytic performance, selectivity and stability for 4-nitrophenol hydrogenation. Pd tiny particles are fixed in the cavity of COF to obtain Pd/COF catalysts, which has a quite narrow particle size distribution (5.09 ± 1.30 nm). As-prepared Pd/COF catalysts (Pd loading-2.11 wt%) shows excellent catalytic performance (conversion - 99.3%, selectivity >99.0% and turnover frequency (TOF)-989.4 h^-1) for 4-nitrophenol hydrogenation under relatively mild reaction conditions of reaction temperature-40 °C and reaction pressure-3.0 MPa H₂, and Pd/COF catalysts have high stability. Pd/COF catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscope (TEM), high resolution TEM (HRTEM), Brunauer-Emmett-Teller (BET), scanning TEM energy-dispersive X-ray spectroscopy (STEM-EDS) elemental analysis techniques to prove that the Pd nanoparticles are highly dispersed on the COF. Pd/COF catalysts have good stability and reusability hence with certain industrial application value.

Synthesis of Electron-Rich Porous Organic Polymers via Schiff-Base Chemistry for Efficient Iodine Capture

As one of the main nuclear wastes generated in the process of nuclear fission, radioactive iodine has attracted worldwide attention due to its harm to public safety and environmental pollution. Therefore, it is of crucial importance to develop materials that can rapidly and efficiently capture radioactive iodine. Herein, we report the construction of three electron-rich porous organic polymers (POPs), denoted as POP-E, POP-T and POP-P via Schiff base polycondensations reactions between Td-symmetric adamantane knot and four-branched “linkage” molecules. We demonstrated that all the three POPs showed high iodine adsorption capability, among which the adsorption capacity of POP-T for iodine vapor reached up to 3.94 g·g⁻¹ and the removal rate of iodine in n-hexane solution was up to 99%. The efficient iodine capture mechanism of the POP-T was investigated through systematic comparison of Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after iodine adsorption. The unique π-π conjugated system between imine bonds linked aromatic rings with iodine result in charge-transfer complexes, which explains the exceptional iodine capture capacity. Additionally, the introduction of heteroatoms into the framework would also enhance the iodine adsorption capability of POPs. Good retention behavior and recycling capacity were also observed for the POPs.

Lignin-based electrospinning nanofibers for reversible iodine capture and potential applications

The capture of radioactive iodine has recently attracted much attention due to the release of radioactive iodine during nuclear waste disposal and disasters. Exploring highly efficient, sustainable, and eco-friendly materials for capturing radioactive iodine has great significance in developing safe nuclear energy. We reported highly efficient, natural, lignin-based, electrospun nanofibers (LNFs) for reversible radioiodine capture. Abundant iodine adsorption sites, such as functional groups and the interaction between the intermolecular forces exist in LNFs. The capacity of the LNFs for the saturated adsorption of iodine was found to be 220 mg·g^-1, which is higher than that of the majority of bio-based adsorbents studied. Moreover, the LNFs exhibited an excellent recycling behavior, and their absorption capacity remained at 84.72% after 10 recycles. Therefore, the results imply that the lignin-based nanofibers can act as a natural, sustainable and eco-friendly packed material for the purification columns in industrial applications. The results demonstrate that the novel, nanostructured, natural biomass, as an ideal candidate has the potential for practical nuclear wastewater purification.

Highly conjugated two-dimensional covalent organic frameworks for efficient iodine uptake

Radioactive iodine in nuclear waste would be harmful to nature and human health. The design of adsorbents for iodine capture with high efficiency still remains a challenge. Herein, two highly conjugated two-dimensional covalent organic frameworks (TFPB-BPTA-COF and TFPB-PyTTA-COF) have been successfully constructed. Both COFs possess high porosity, stability, and high π-conjugated framework. Impressively, TFPB-PyTTA-COF exhibits an excellent iodine uptake value up to 5.6 g g -1 , which is superior to most of reported COF-based adsorbents for iodine capture.

Adsorption of iodine in metal-organic framework materials

Nuclear power will continue to provide energy for the foreseeable future, but it can pose significant challenges in terms of the disposal of waste and potential release of untreated radioactive substances. Iodine is a volatile product from uranium fission and is particularly problematic due to its solubility. Different isotopes of iodine present different issues for people and the environment. 129I has an extremely long half-life of 1.57 × 107 years and poses a long-term environmental risk due to bioaccumulation. In contrast, 131I has a shorter half-life of 8.02 days and poses a significant risk to human health. There is, therefore, an urgent need to develop secure, efficient and economic stores to capture and sequester ionic and neutral iodine residues. Metal-organic framework (MOF) materials are a new generation of solid sorbents that have wide potential applicability for gas adsorption and substrate binding, and recently there is emerging research on their use for the selective adsorptive removal of iodine. Herein, we review the state-of-the-art performance of MOFs for iodine adsorption and their host-guest chemistry. Various aspects are discussed, including establishing structure-property relationships between the functionality of the MOF host and iodine binding. The techniques and methodologies used for the characterisation of iodine adsorption and of iodine-loaded MOFs are also discussed together with strategies for designing new MOFs that show improved performance for iodine adsorption.

Structural Engineering of Covalent Organic Frameworks Comprising Two Electron Acceptors Improves Photocatalytic Performance

Covalent organic frameworks (COFs) have recently attracted much attention as potential photocatalysts for hydrogen production. The effective separation of photogenerated charges is a key objective to improve the photocatalytic activity of COFs. Here, four COFs were synthesized through the Schiff-base reaction to investigate whether the presence (simultaneous or not) of triazine and ketone as acceptors in COFs improved electron-hole separation efficiency. Evidence indicated that charge separation was more efficient when triazine and ketone were simultaneously present in the COF. The COF comprising two acceptors displayed the highest photocatalytic hydrogen production rate (31.43 μmol h^-1 ; 41.2 and 3.4 times as large as those of the COFs containing only triazine or ketone, respectively). Moreover, the effect of the distance between the two acceptors on the electron-hole separation was investigated by changing the length of a bridging biphenyl ring. It turned out that the transport distance of a single phenyl group was more favorable for the catalytic reaction. This work affords insight and support for the design of efficient COF photocatalysts.

Facile and Site-Selective Synthesis of an Amine-Functionalized Covalent Organic Framework

Amine-functionalized covalent organic frameworks (COFs) hold great potential in diversified applications. However, the synthesis is dominated by postsynthetic modification, while the de novo synthesis allowing for direct installation of amine groups remains a formidable challenge. Herein, we develop a site-selective synthetic strategy for the facile preparation of amine-functionalized hydrazone-linked COF for the first time. A new monomer 2-aminoterephthalohydrazide (NH₂-Th) bearing both amine and hydrazide functionalities is designed to react with benzene-1,3,5-tricarbaldehyde (Bta). Remarkably, the different activity of amine and hydrazide groups toward aldehyde underpin the highly site-selective synthesis of an unprecedented NH₂-Th-Bta COF with abundant free amine groups anchored in the well-defined pore channels. Interestingly, NH₂-Th-Bta COF exhibits dramatically enhanced iodine uptake capacity (3.58 g g^-1) in comparison to that of the nonfunctionalized Th-Bta COF counterpart (0.68 g g^-1), and many reported porous adsorbents, despite its low specific surface area. Moreover, NH₂-Th-Bta COF possesses exceptional cycling capability and retained high iodine uptake, even after six cycles. This work not only provides a simple and straightforward route for the de novo synthesis of amine-functionalized COFs but also uncovers the great potential of amine-functionalized COFs as adsorbents in the efficient removal of radioiodine and beyond.

Theoretical insights into volatile iodine adsorption onto COF-DL229

COF-DL229 is one of the promising sorbents for the capture of volatile radioiodine due to its large adsorption capacity. However, the interaction mechanism between them remains unclear. In the present work, the adsorption of volatile iodine onto COF-DL229 was systematically investigated using periodic density functional theory and crystal orbital Hamilton population calculations. The "soft" characters of COF-DL229 have been theoretically demonstrated. Furthermore, the adsorption energies are extremely large (-8.38 to -9.26 eV), which mainly originate from the framework deformation energies, accounting for 90% at least. The I₂ interacts with the skeleton mainly through the N atoms of the imine linkers or the C atoms of the phenyl rings. And, the I-N bond is the strongest bond among all the potential secondary bonds formed between the skeleton and I₂. The electrons could be transferred from the skeletons to the iodine atoms and from the near iodine atom to the far one. It is also found that the energy gap becomes narrow after iodine adsorption and the skeletons mainly interact with the bonding orbital σ_p of I₂. The present work could provide reasonable theoretical explanations to the corresponding experimental investigations and contribute to the design and screening of better sorbents for the capture of volatile radioiodine.

Controllable Synthesis and Performance Modulation of 2D Covalent-Organic Frameworks

Covalent-organic frameworks (COFs) are especially interesting and unique as their highly ordered topological structures entirely built from plentiful π-conjugated units through covalent bonds. Arranging tailorable organic building blocks into periodically reticular skeleton bestows predictable lattices and various properties upon COFs in respect of topology diagrams, pore size, properties of channel wall interfaces, etc. Indeed, these peculiar features in terms of crystallinity, conjugation degree, and topology diagrams fundamentally decide the applications of COFs including heterogeneous catalysis, energy conversion, proton conduction, light emission, and optoelectronic devices. Additionally, this research field has attracted widespread attention and is of importance with a major breakthrough in recent year. However, this research field is running with the lack of summaries about tailorable construction of 2D COFs for targeted functionalities. This review first covers some crucial polymeric strategies of preparing COFs, containing boron ester condensation, amine-aldehyde condensation, Knoevenagel condensation, trimerization reaction, Suzuki CC coupling reaction, and hybrid polycondensation. Subsequently, a summary is made of some representative building blocks, and then underlines how the electronic and molecular structures of building blocks can strongly influence the functional performance of COFs. Finally, conclusion and perspectives on 2D COFs for further study are proposed.

Multifunctional Zn-Ln (Ln = Eu and Tb) heterometallic metal-organic frameworks with highly efficient I2 capture, dye adsorption, luminescence sensing and white-light emission

A new family of isostructural 3d-4f heterometallic metal-organic frameworks (HMOFs), [Zn₃Eu_xTb_2-x(TZI)₄(DMA)₅(H₂O)₃]·4DMA [x = 0 (1), 0.3 (2), 0.6 (3), 0.9 (4), 1 (5), 1.2 (6), 1.5 (7), 1.8 (8), 2 (9)], has been synthesized using the 5-(4-(tetrazol-5-yl) phenyl)isophthalic acid (H₃TZI) ligand, Ln^III ions and Zn^II ions under solvothermal conditions. All HMOFs exhibit a (3,3,4,5,5)-connected 6³·6³(4²·6²·8²)(4·6⁵·8)(4·6⁶·8³) topology, which features three different types of motifs: one is a mononuclear Zn^II ion and the other two motifs are binuclear [Zn(COO)₃Ln] clusters. The adsorption experiments indicate that Zn₃Tb₂ (1) could efficiently remove almost all I₂ from cyclohexane solution after 12 h and also showed better adsorption towards neutral red (NR) dye (adsorption: only the Zn₃Tb₂ (1) was taken as one representative). Simultaneously, the luminescence sensing showed that Zn₃Tb₂ (1) and Zn₃Eu₂ (9) have excellent response and sensitivity towards pollutants such as Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) with high selectivity and a fairly low limit of detection through luminescence quenching effect. Moreover, seven trimetallic-doped HMOFs 2-8 analogues of Zn₃Ln₂ (single) HMOFs were designed and prepared, showing different changes of luminescent color. More interestingly, Zn₃Eu_1.5Tb_0.5 (7) with white-light emission was fabricated by doping relative concentrations of Eu³⁺ and Tb³⁺ ions. To the best of our knowledge, Zn₃Eu_1.5Tb_0.5 (7) represents a novel kind of heterometallic Zn₃Ln₂ HMOFs with white-light emission. It could be deduced that the excellent characteristics, namely strong typical luminescence emission of Zn^II and Ln^III ions, microporous channels, active open metal sites (tetra-coordinated Zn^II-metal sites), and uncoordinated carboxylate O atoms and uncoordinated tetrazolate N atoms, made the above HMOFs an ideal platform for adsorption, luminescence sensing, and white-light emission. More significantly, these HMOFs are the first reported Zn-Ln heterometallic materials with the H₃TZI ligand.

Constructing Stable and Porous Covalent Organic Frameworks for Efficient Iodine Vapor Capture

Covalent organic frameworks (COF) with periodic porous structures and tunable functionalities are a new class of crystalline polymers connected via strong covalent bonds. Constructing COF materials with high stability and porosity is attracting and essential for COFs' further functional exploration. In this work, two new covalent organic frameworks (TTA-TMTA-COF and TTA-FMTA-COF) with high surface area, large pore volume, and excellent chemical stability toward harsh conditions are designed and synthesized by integrating the methoxy functional groups into the networks. Both two COFs are further employed for iodine removal since radioactive iodine in nuclear waste has seriously threatened the natural environment and human health. TTA-TMTA-COF and TTA-FMTA-COF can capture 3.21 and 5.07 g g^-1 iodine, respectively. Notably, the iodine capture capacity for iodine of TTA-FMTA-COF does not show any decline after being recycled five times. These results demonstrate both COFs possess ultrahigh capacity and excellent recyclability.

Tetrathiafulvalene-based covalent organic frameworks for ultrahigh iodine capture

To safeguard the development of nuclear energy, practical techniques for capture and storage of radioiodine are of critical importance but remain a significant challenge. Here we report the synergistic effect of physical and chemical adsorption of iodine in tetrathiafulvalene-based covalent organic frameworks (COFs), which can markedly improve both iodine adsorption capacity and adsorption kinetics due to their strong interaction. These functionalized architectures are designed to have high specific surface areas (up to 2359 m2 g-1) for efficient physisorption of iodine, and abundant tetrathiafulvalene functional groups for strong chemisorption of iodine. We demonstrate that these frameworks achieve excellent iodine adsorption capacity (up to 8.19 g g-1), which is much higher than those of other materials reported so far, including silver-doped adsorbents, inorganic porous materials, metal-organic frameworks, porous organic frameworks, and other COFs. Furthermore, a combined theoretical and experimental study, including DFT calculations, electron paramagnetic resonance spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy, reveals the strong chemical interaction between iodine and the frameworks of the materials. Our study thus opens an avenue to construct functional COFs for a critical environment-related application.

Band Gap Engineering in Solvochromic 2D Covalent Organic Framework Photocatalysts for Visible Light-Driven Enhanced Solar Fuel Production from Carbon Dioxide

Solar light-driven fuel production from carbon dioxide using organic photocatalysts is a promising technique for sustainable energy sources. Band gap engineering in sustainable organic photocatalysts for improving efficiency and fulfilling the requirements is highly anticipated. Here, we present a new strategy to engineer the band gap in covalent organic framework (COF) photocatalysts by varying the push-pull electronic effect. To implement this strategy, we have designed and synthesized four different COFs using a tripodal amine 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-4-amine)) [Ttba] with 1,3,5-triformylbenzene (COF-1), 2,4,6-triformylphloroglucinol (COF-2), 2,4,6-triformylphenol (COF-3), and 2,4,6-triformylresorcinol (COF-4). On varying the number of hydroxyl units in the aldehyde precursor, the resulting COFs allow the fine-tuning of their band gap and band edge positions and result in different morphologies with varying surface areas. The enhanced optical properties of COF-3 and COF-4 with very suitable band gaps of 2.02 and 1.95 eV, respectively, enable them to demonstrate a high-efficiency photobiocatalytic system for NADH photoregeneration and enhanced visible light-driven formic acid production at a rate of 226.3 μmol g^-1 in 90 min. The triazine core enables efficient charge separation, while the hydroxyl groups induce an electronic push-pull effect, regulating their photocatalytic efficiency. The results demonstrated the morphology-guided enhanced surface area and dual keto-enol tautomerism-induced push-pull effect in asymmetrical charge distribution as key features in the fine-tuning of the photocatalysts.

Covalent Organic Frameworks: Synthesis, Properties and Applications-An Overview

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust, covalently bonded crystalline networks that extend in two or three dimensions. By strategically combining monomers with specific structures and properties, synthesized COF materials can be fine-tuned and controlled at the atomic level, with unparalleled precision on intrapore chemical environment; moreover, the unusually high pore accessibility allows for easy post-synthetic pore wall modification after the COF is synthesized. Overall, COFs combine high, permanent porosity and surface area with high thermal and chemical stability, crystallinity and customizability, making them ideal candidates for a myriad of promising new solutions in a vast number of scientific fields, with widely varying applications such as gas adsorption and storage, pollutant removal, degradation and separation, advanced filtration, heterogeneous catalysis, chemical sensing, biomedical applications, energy storage and production and a vast array of optoelectronic solutions. This review attempts to give a brief insight on COF history, the overall strategies and techniques for rational COF synthesis and post-synthetic functionalization, as well as a glance at the exponentially growing field of COF research, summarizing their main properties and introducing the numerous technological and industrial state of the art applications, with noteworthy examples found in the literature.

Pore Size Control via Multiple-Site Alkylation to Homogenize Sub-Nanoporous Covalent Organic Frameworks for Efficient Sieving of Xenon/Krypton

Among various fission products generated in nuclear reactors, xenon and krypton are two important fission gases with high flow, diffusivity, and radioactivity. Moreover, xenon isolated from these products is an expensive industrial resource with wide applications in medicine and lighting, which makes the development of efficient methods for separation of xenon/krypton significant. However, it is usually difficult for xenon/krypton to be adsorbed by chemical adsorbents due to their inert gas properties, and sub-nanoporous adsorbents proven to be workable for the separation of xenon/krypton are still hard to prepare and regulate the pore size. Herein, we report two novel sub-nanoporous covalent organic frameworks (COFs), which were applied to the sieving of xenon/krypton for the first time. The sub-nanoporous COFs were synthesized via aldehyde-amine polycondensation reactions and the subsequent pore size regulation and homogenization process by using a facile, operational, and efficient multiple-site alkylation strategy. Impressively, the as-prepared sub-nanoporous COFs realized the efficient adsorption and sieving of xenon/krypton owing to their slightly larger pore sizes (∼7 Å) than the dynamic diameters of xenon/krypton and their larger pore volumes. The maximum adsorption capacity for xenon is up to 85.6 cm³/g, and the xenon/krypton selectivity can reach to 9.7. Moreover, the as-prepared COFs possess good γ-ray irradiation stability, which endows them with great potentials for the sieving of radioactive xenon/krypton in the practical application. The multiple-site alkylation strategy proposed in this study provides a valuable approach for the pore construction and control of the porous materials, especially the sub-nanoporous adsorption materials.

High iodine uptake in two-dimensional covalent organic frameworks

Two 2-dimensional covalent organic frameworks (COFs; TJNU-203 and TJNU-204) with high crystallinity and large specific surface area are rationally fabricated using a three-connected distorted building block and linear linkers. The two COFs show high iodine uptake (5.885 g g-1 for TJNU-203 and 5.335 g g-1 for TJNU-204) on account of physical-chemical adsorption, which make them one among the best porous materials for iodine adsorption.

The Effects of Oxygen Functional Groups on Graphene Oxide on the Efficient Adsorption of Radioactive Iodine

Oxygen-containing functional groups tend to induce a strong interaction between solid adsorbents and iodine molecules, yet have not been systematically investigated. Herein, on the basis of a series of nitric acid-treated graphene oxide (GO) with different contents of oxygen functional groups for iodine adsorption, it was found that the iodine uptake capacity is proportionate to the oxygen content and the diversities of oxygen-containing groups. The density functional theory (DFT) calculation results also suggest that oxygen-containing groups result in strong interactions between iodine molecules and the adsorbents through a covalent bond-forming process, among which -OH groups possess a higher adsorption energy averagely. Such theoretical and experimental work deepens our understanding of the effects of oxygen functional groups on iodine adsorption and provides novel ideas for future design and synthesis of high-performance solid adsorbents for radioactive iodine.

Nanocage-Based InIII{TbIII}2-Organic Framework Featuring Lotus-Shaped Channels for Highly Efficient CO2 Fixation and I2 Capture

The exquisite combination of independent 3p [In(CO₂)₄] units and 4f [Tb₂(CO₂)₈] clusters in the presence of the designed hexatopic 2,4,6-tri(2,4-dicarboxyphenyl)pyridine ligand engenders one peculiar nanocaged In(III){Tb(III)}₂-organic framework: ({(Me₂NH₂)[InTb₂(HTDP)₂]·3DMF·3H₂O}_n, designated as NUC-5), which features dual types of lotus-shaped channels along the [100] and [110] axes with related node windows of 5.3 × 6.8 and 12.1 × 9.2 Ų, respectively. To the best of our knowledge, except several coexisted 3p-4f In/Ln clusters of {In₃Ln}- and {In₃Ln₂}-based metal-organic frameworks (MOFs), NUC-5 is one novel type of In/Ln heterometallic framework. In addition, its topology was an unprecedented 3D TAYZIC net with a Schläfli symbol of {4.⁴6²}{4.⁵6⁵}₂{4.⁶6.⁸8}. Moreover, activated NUC-5 is proved to be one efficient adsorbent for CO₂ and one recycled cycloaddition catalyst for the transformation of epoxides into related carbonates with high yields under mild conditions. Furthermore, the excellent reversible sorption performance for I₂ in the volatilization phase or in cyclohexane solution with a maximum adsorption capacity of 609.1 mg/g (3.75 iodine molecules per unit cell) makes NUC-5 a promising adsorbent for radioactive products of ¹²⁹I and ¹³¹I in the field of nuclear industry. This study provides one synthetic strategy that the original nature of MOFs could be enhanced by introducing some specific function-prompted inorganic subunits with the aid of predesigned supporting ligands.

Covalent Organic Frameworks in Separation

In the wake of sustainable development, materials research is going through a green revolution that is putting energy-efficient and environmentally friendly materials and methods in the limelight. In this quest for greener alternatives, covalent organic frameworks (COFs) have emerged as a new generation of designable crystalline porous polymers for a wide array of clean-energy and environmental applications. In this contribution, we categorically review the merits and shortcomings of COF bulk powders, nanosheets, freestanding thin films/membranes, and membranes on porous supports in various separation processes, including separation of gases, pervaporation, organic solvent nanofiltration, water purification, radionuclide sequestration, and chiral separations, with particular reference to COF material pore size, host–guest interactions, stability, selectivity, and permeability. This review covers the fabrication strategies of nanosheets, films, and membranes, as well as performance parameters, and provides an overview of the separation landscape with COFs in relation to other porous polymers, while seeking to interpret the future research opportunities in this field.

Metal ion-assisted carboxyl-containing covalent organic frameworks for the efficient removal of Congo red

Covalent organic frameworks (COFs) have been utilized as molecular sieves to adsorb or remove or separate a wide range of substances.