Progress on Transition Metal-Doped ZnO Nanoparticles and Its Application

Sensitive, Stable, and Recyclable ZnO/Ag Nanohybrid Substrates for Surface-Enhanced Raman Scattering Metrology

Surface-enhanced Raman scattering is a practical, noninvasive spectroscopic technique that measures chemical fingerprints for varieties of molecules in multiple applications. However, synthesizing appropriate substrates for practical, long-term applications of this method has always been a challenging task. In the present study, we show that ZnO/Ag nanohybrid substrates may act as highly stable, sensitive, and recyclable substrates for surface-enhanced Raman scattering, as illustrated by the detection of methylene blue, selected as a test dye molecule with self-cleaning functionalities. Specifically, we demonstrate the detection enhancement factor of 3.7 × 107 along with exceptional long-term stability explained in terms of the localized surface plasmon resonance from the Ag nanocrystals embedded into the chemically inert ZnO nanoparticles, constituting the nanohybrid. Significantly, these substrates can be efficiently cleaned and regenerated while maintaining their high performance upon recycling. As a result, using these substrates, up to 10-12 M detection sensitivity has been demonstrated, enabling the accuracy required in modern environmental monitoring, bioassays, and analytical chemistry. Thus, ZnO nanoparticles with embedded Ag nanocrystals constitute a novel class of advanced nanohybrid substrates for use in multiple applications of surface-enhanced Raman scattering metrology.

Exploitation of green synthesized chromium doped zinc oxide nanorods (NRs) mediated by flower extract of Rhododendron arboreum for highly efficient photocatalytic degradation of cationic dyes Malachite green (MG) and Fuchsin basic (FB)

In this work, green method to synthesize chromium-doped zinc oxide (ZnO) nanorods (NRs) using an aqueous flower extract from Rhododendron arboretum is explored. Herein, chromium-doped ZnO NRs were prepared with different amount of chromium doping, varied as 2-10%. The green synthesized products underwent substantial analysis through X-ray diffraction (XRD), spectroscopic such as ultraviolet spectroscopy(UV-Vis) and scanning electron microscopy (SEM) methods. All samples were found to have hexagonal wurtzite ZnO, with average particle sizes of 52.41, 56.6, 54.44, 53.05, and 56.99 nm, respectively, for 2, 4, 6, 8, and 10% chromium doping in ZnO NRs. The Cr-doped ZnO NRs exhibited remarkable photocatalytic degradation activity of cationic dyes under UV-light, i.e., Malachite Green and Fuchsin Basic with degradation of 99.604 and 99.881%, respectively in 90 min. The reusability tests for these green synthesized Cr-doped ZnO NRs have also been carried out, showed 9-11 cycles with 85% of degradation efficiency. In addition, the Cr-doped ZnO NRs exhibited high selectivity for cationic dyes when experiments against mixture of dyes were performed. Photodegradation kinetics followed the pseudo-first-order model. The flower-extract-stabilized chromium-doped ZnO NRs demonstrated high photocatalytic activity toward malachite green and fuchsin basic dyes, potential material for pollution remediation.

Green Synthesis of Metal-Doped ZnO Nanoparticles Using Bauhinia racemosa Lam. Extract and Evaluation of Their Photocatalysis and Biomedical Applications

A fascinating problem in the fields of nanoscience and nanobiotechnology has recently emerged, and to tackle this, the production of metal oxide nanoparticles using plant extracts offers numerous benefits over traditional physicochemical methods. In the present investigation, ZnO nanoparticles were fabricated from Bauhinia racemosa Lam. (BR) leaves extract with various transition metal (TM) dopants (Ni, Mn, and Co). Plant leaves extract containing metal nitrate solutions were utilized as a precursor to synthesize the pristine and TM-doped ZnO nanoparticles. Structural, functional, optical, and surface properties of the fabricated samples were studied by using physicochemical and photoelectrochemical measurements. The organic pollutants tetracycline (TC), ampicillin (AMP), and amoxicillin (AMX) were used in the photocatalytic degradation assessment of the fabricated samples. Through X-ray diffraction (XRD) and transmission electron microscopy (TEM) investigation, the fabricated nanoparticles wurtzite crystal structure was verified. Moreover, Fourier transform infrared (FT-IR) analysis verified the existence of functional groups in the fabricated nanoparticles. The migration of electrons from the deep donor level and zinc interstitial to the Zn-defect and O-defect is related to the emission peaks seen at 468, 480, 534, and 450 nm in photoluminescence (PL) spectra. Co-ZnO nanoparticles demonstrated potent and excellent photocatalytic degradation performance for TC (91.09%), AMP (87.97%), and AMX (92.42%) antibiotics within 210, 180, and 150 min of visible light irradiation. Co-ZnO nanoparticles also demonstrated strong antimicrobial performance against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Aspergillus flavus, Aspergillus niger, and Bacillus subtilis. Further investigation of in vitro cytotoxic potential against the A549 cell line (IC50 = 24 ± 0.5 μg/mL) utilizing MTT assay and the free radical scavenging performance of Co-ZnO nanoparticles estimated by DPPH assay utilizing l-ascorbic acid as a reference was also performed. Anti-inflammatory potential is also reviewed by comparing it with the standard drug Diclofenac, and the maximum activity was obtained for Ni-ZnO nanoparticles (IC50 = 72.4 μg/mL).

Aloe vera assisted green synthesis of Ag and Cu co-doped ZnO nanoparticles and a comprehensive analysis of their structural, morphological, optical, electrical and antibacterial properties

This study investigates the potential of utilizing Aloe vera-assisted green synthesis with transition metal dopants of Ag and Cu for greater efficiency and sustainability in advanced scientific applications utilizing ZnO nanoparticles. Samples were prepared using the co-precipitation method, maintaining a basic pH media of 10. Aloe vera gel extract was chosen for its acclaimed role as a stabilizing and reducing agent and its proven antioxidant, antibacterial, and anticancer properties. The XRD report revealed the hexagonal Wurtzite crystal structure of nanoparticles, exhibiting a crystallite size range of 17-23 nm with substantial alterations in lattice parameters, dislocation density, and bond lengths when dopants were added. Additionally, EDX analysis confirmed the perfect doping of Ag and Cu in ZnO without any impurities. SEM analysis indicated a reduction in agglomeration, accompanied by a transition in particle morphology from columnar to globular. Additionally, the optical study showed a band gap range of 3.18-3.27 eV, confirming it to be a wide band gap semiconductor. The effect of dopants resulted in an increase in transparency and band gap, while a decrease in absorption coefficient in the visible wavelength region. With increasing temperature, a decline in electrical resistivity was noted, with co-doped nanoparticles consistently exhibiting the lowest resistivity, affirming semiconductor characteristics. Most importantly, A remarkable antibacterial efficacy was noticed at low concentrations against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The zone of inhibition produced by nanoparticles exhibited values akin to the antibiotic control, even at substantially lower doses. This research offers a comprehensive analysis of the effects of Ag and Cu in Aloe vera-assisted green-synthesized ZnO nanoparticles, concurrently addressing their potential applications in biomedical, energy storage, and optoelectronic devices.

Investigation of Photoluminescence and Optoelectronics Properties of Transition Metal-Doped ZnO Thin Films

Thin films of zinc oxide (ZnO) doped with transition metals have recently gained significant attention due to their potential applications in a wide range of optoelectronic devices. This study focuses on ZnO thin films doped with the transition metals Co, Fe, and Zr, exploring various aspects of their structural, morphological, optical, electrical, and photoluminescence properties. The thin films were produced using RF and DC co-sputtering techniques. The X-ray diffraction (XRD) analysis revealed that all the doped ZnO thin films exhibited a stable wurtzite crystal structure, showcasing a higher structural stability compared to the undoped ZnO, while the atomic force microscopy (AFM) imaging highlighted a distinctive granular arrangement. Energy-dispersive X-ray spectroscopy was employed to confirm the presence of transition metals in the thin films, and Fourier-transform infrared spectroscopy (FTIR) was utilized to investigate the presence of chemical bonding. The optical characterizations indicated that doping induced changes in the optical properties of the thin films. Specifically, the doped ZnO thin film's bandgap experienced a significant reduction, decreasing from 3.34 to 3.30 eV. The photoluminescence (PL) analysis revealed distinguishable emission peaks within the optical spectrum, attributed to electronic transitions occurring between different bands or between a band and an impurity. Furthermore, the introduction of these transition metals resulted in decreased resistivity and increased conductivity, indicating their positive influence on the electrical conductivity of the thin films. This suggests potential applications in solar cells and light-emitting devices.

Developing low-cost nanohybrids of ZnO nanorods and multi-shaped silver nanoparticles for broadband photodetectors

Photodetectors are essential elements for various applications like fiber optic communication systems, biomedical imaging, and so on. Thus, improving the performance and reducing the material costs of photodetectors would act as a motivation toward the future advancement of those applications. This study introduces the development of a nanohybrid of zinc oxide nanorods (ZnONRs) and multi-shaped silver nanoparticles MAgNPs through a simple solution process; in which ZnONRs are hybridized with MAgNPs to enable visible absorption through the surface plasmon resonance (SPR) effect. The photodetector based on ZnONRs/MAgNPs is responsive to visible light with representative wavelengths of 395, 464, 532 and 640 nm, and it exhibits high responsivity (R), photoconductive gain (G) and detectivity (D). The maximum R is calculated from the fitting curve of the responsivity-power relation with the value of 5.35 × 10³ (mA W^-1) at 395 nm excitation. The highest G and D reach 8.984 and 3.71 × 10¹⁰ Jones at that wavelength. This reveals the promise of our innovative broadband photodetector for practical usage.

Suppression of Visible Emission in Low-Temperature Synthesized Cobalt-Doped ZnO Nanoparticles and Their Photosensing Applications

Cobalt (Co)-doped ZnO nanoparticles have been synthesized at 100 °C using a simple chemical technique, without post-deposition annealing. These nanoparticles are of excellent crystallinity and show a significant reduction in defect density upon Co-doping. By varying the Co solution concentration, it is observed that oxygen-vacancy-related defects are suppressed at lower Co-doping, while the defect density shows an increasing trend at higher doping densities. This suggests that mild doping can significantly suppress the defects in ZnO for electronic and optoelectronic applications. The effect of Co-doping is studied using X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), electrical conductivity, and Mott-Schottky plots. Photodetectors fabricated using pure and Co-doped ZnO nanoparticles show a noticeable reduction in the response time upon Co-doping, which again affirms the reduction in the defect density after Co-doping.

Bias and illumination-dependent room temperature negative differential conductance in Ni-doped ZnO/p-Si Schottky photodiodes for quantum optics applications

In this article, evidence for the existence of illumination and bias-dependent negative differential conductance (NDC) in Ni-doped Al/ZnO/p-Si Schottky diodes, and the possible mechanism for its origin, are presented. The atomic percentages of Ni doping were 0%, 3%, 5%, and 10%. NDC is observed between -1.5 V to -0.5 V in reverse bias under illumination, but only at certain doping levels and specific forward bias. Furthermore, the devices show excellent optoelectronic characteristics in the photoconductive and photovoltaic modes, with device open circuit voltages ranging from 0.03 V to 0.6 V under illumination.

ZnO and cobalt decorated ZnO NPs: Synthesis, photocatalysis and antimicrobial applications

The rapid growth of pollutants, both biological and non-biological, puts environmental systems in jeopardy. In view of this, the current study demonstrates the synthesis of undoped and Cobalt-doped zinc oxide nanoparticles (Co doped ZnO NPs) via co-precipitation method. The confirmation of incorporation of the Co dopant into ZnO NPs was verified through various spectroscopic and microscopic techniques. UV-absorption spectra of cobalt-doped ZnO NPs revealed a red shift with change of absorption spectra from 356 nm to 377 nm as compared to undoped ZnO NPs. XRD studies inferred that the average crystallite size of 0.5% and 1% Co-doped ZnO powder was obtained to be ∼16 nm and 14 nm respectively. A drop in band gap value from 3.48 eV to 3.30 eV provided as substantive evidence of the successful integration of Co²⁺ ions inside the ZnO matrix. FESEM and HRTEM studies revealed that the obtained ZnO NPs are in narrow size distribution (15-20 nm) with a wurtzite crystal structure. The synthesized ZnO and Co-ZnO NPs showed excellent photocatalytic and antimicrobial potency towards reactive brown dye (RB-1) and two bacterial strains, respectively. 1% Co-doped ZnO demonstrated the maximum photocatalytic activity (∼95%), in contrast to 0.5% Co-doped ZnO and undoped ZnO. Thus, the findings of this work support the developed system has a dual role as the photocatalyst, and antibacterial agent for efficient environmental remediation.

Facile and Novel Route for the Preparation of ZnO Nanoparticles with Different Cr Loadings for Opto-Photocatalysis Applications

The current article deals with the facile yet novel route to prepare zinc oxide (ZnO) nanoparticles with different weight percentages of chromium as a dopant. The impact of such dopant into the ZnO host lattice is explored in terms of the structural, vibrational, optical, and photocatalytic characteristics. The Bragg reflections in the X-ray diffraction displayed a phase pure wurtzite ZnO hexagonal system. The morphology reflects spherical-shaped ZnO particles in all the systems. The optical analysis ensured a good ultraviolet light absorption and a bandgap energy in the range of 3.30–3.24 eV. The principal Raman vibrations ensured the presence of the wurtzite ZnO crystal structure. The decolorization experiment of methyl green dye with pristine and various chromium-doped ZnO nanoparticles was conducted under the illumination of visible light. The obtained results showed that the incorporation of Cr in the framework significantly improved the photocatalytic performance of ZnO.

ZnO-based antimicrobial coatings for biomedical applications

Rapid transmission of infectious microorganisms such as viruses and bacteria through person-to-person contact has contributed significantly to global health issues. The high survivability of these microorganisms on the material surface enumerates their transmissibility to the susceptible patient. The antimicrobial coating has emerged as one of the most interesting technologies to prevent growth and subsequently kill disease-causing microorganisms. It offers an effective solution a non-invasive, low-cost, easy-in-use, side-effect-free, and environmentally friendly method to prevent nosocomial infection. Among antimicrobial coating, zinc oxide (ZnO) stands as one of the excellent materials owing to zero toxicity, high biocompatibility to human organs, good stability, high abundancy, affordability, and high photocatalytic performance to kill various infectious pathogens. Therefore, this review provides the latest research progress on advanced applications of ZnO nanostructure-based antibacterial coatings for medical devices, biomedical applications, and health care facilities. Finally, future challenges and clinical practices of ZnO-based antibacterial coating are addressed.

Environmentally Benign Structural, Topographic, and Sensing Properties of Pure and Al-Doped ZnO Thin Films

In the present research work, Zn_1-x Al _x O thin films with varying proportions of Al (x = 0.00, 0.01, 0.02, and 0.03) are prepared by a chemical sol-gel spin-coating technique. The crystal structural, morphological, and humidity-sensing properties of the synthesized Zn_1-x Al _x O thin films, with varying concentrations of Al (x = 0.00, 0.01, 0.02, and 0.03), were characterized by X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM); a special humidity-controlled chamber was designed for the humidity-sensing studies. In structural and phase analyses, XRD patterns of Zn_1-x Al _x O thin films show a hexagonal wurtzite crystal structure. The average crystallite sizes of Zn_1-x Al _x O thin films were calculated and found to be ∼18.00, 22.50, 26.30, and 29.70 nm using the X-ray diffraction (XRD) pattern. The surface morphology of Zn_1-x Al _x O Al (x = 0.00, 0.01, 0.02, and 0.03) thin films obtained from AFM micrographs analysis indicates the modification of the spherical grains into nanorods, which were distributed throughout the surface of the films. The SEM image of 3 wt % Al-doped ZnO nanomaterials also shows that spherical nanoparticles changed to nanorod-like structures with a high packing density. Furthermore, increasing the Al-doping concentration from 0 to 3 wt % in ZnO NPs shows lower hysteresis loss, less aging effect, and good sensitivity in the range of 9.8-16.5 MΩ/%RH. The sensitivity of the sensing materials increased with increasing Al-doping concentration, which is very useful for humidity sensors.

Role of Seed Layer Crystalline Quality in Photoresponse Performance of Hydrothermally Grown ZnO Nanorods

We investigated the effects of the crystalline state for seed layers (SLs) on the growth morphology and material characteristics for hydrothermally grown ZnO nanorods (NRs). For this, preheating (PH) at different temperatures (100–300 °C) and O₂ plasma treatment (PT) for 9 min were performed during the growth of SLs on p-Si by the aqueous solution-based method to provide the characteristic change on the NR growth platform. An improvement in material properties was achieved from the ZnO NRs grown on the SL crystals of enhanced crystalline quality in terms of the increased preferred orientation (002), the higher UV emission with suppressed deep-level emissions, the recovery of O/Zn stoichiometry, and the reduction of various intrinsic defects. Ultraviolet photodiodes of a p-Si/n-ZnO-NR structure fabricated under the SL conditions of O₂ PT and PH at 100 °C showed a significantly enhanced on-off current ratio of ~90 at +5 V and faster photoresponse characteristics presenting a reduction in the fall time from 16 to 9 s.

Development of antibacterial and superabsorbent wound composite sponges containing carboxymethyl cellulose/gelatin/Cu-doped ZnO nanoparticles

This study aimed to develop a novel antibacterial and superabsorbent dressing by introducing the Cu-doped ZnO nanoparticles into the carboxymethyl cellulose/gelatin glutaraldehyde-crosslinked composite sponge that is fabricated by lyophilization method. Undoped and Cu-doped ZnO (Zn_1-xCu_xO, x = 0.03 and 0.05) nanoparticles were synthesized through the stabilizing agent-used precipitation process and characterized by XRD, FESEM, FTIR, and ICP-OES techniques. The XRD evaluation determined that the concentration of copper in ZnO is limited to below 5%. Additionally, The ICP-OES analysis confirmed the effect of the doping process on the ZnO crystalline structure by releasing more zinc and copper ions from Cu-doped ZnO, which resulted to improve antibacterial activity against Staphylococcus aureus and Escherichia coli bacterial strains. The effect of ZnO nanoparticles on the physical and mechanical performance of the optimized composite sponge indicated that the incorporation of 3 wt% ZnO nanoparticles produces a well-interconnected porous structure (~156 µm) with high water absorption (~3089%) and proper elongation (~49%) in a wet medium. The incorporation of Cu-doped ZnO nanoparticles enhanced antibacterial potential of the composite sponge. Meanwhile, all sponge groups are safe for viability, proliferation and adhesion of human dermal fibroblast cells. Overall, the obtained data has proved the potential of carboxymethyl cellulose/gelatin/Cu-doped ZnO dressing as a promising candidate for managing infected wounds.

Catalytic potential of endophytes facilitates synthesis of biometallic zinc oxide nanoparticles for agricultural application

Recent advances fascinated the use of biological resources in combination with metals to obtain high quality biometals and apply its advantages in different fields. Endophytic mediated Zinc oxide nanoparticles (ZnO-NPs) is an economical and ecofriendly way for farmers to avoid Zn deficiency in rice crop and obtain high yield. Here we synthesized ZnO-NPs utilizing endophytic bacterial strain of Enterobacter hormaechei (E. hormaechei). The physiochemical properties of the prepared NPs were determined through UV-Vis spectroscopy, XRD, FT-IR, SEM and TEM. The prepared NPs revealed surface plasmon resonance (SPR) at 320 nm (nm) and crystalline structure with 21 nm average crystalline size. FT-IR spectra showed the presence of carboxylic, alcohol and amine functional groups, which confirm the biometallic assembling of the ZnO and endophytic bacterial functional groups. SEM showed pyramidal symmetry whereas TEM revealed poly dispersed spherical shape with particle size distribution 18-48 nm. Our results showed that prepared NPs possess significant antifungal, antibacterial and antioxidant potential at 25, 50 and 100 µg/mL concentrations. Moreover, Cytotoxic and hemolytic assay showed significant results (less % viability and hemolysis activity) at 50 and 100 µg/mL (ZnO-NP's) concentrations as compared to control. The prepared ZnO-NPs were used as bio fertilizer in various concentrations as a foliar spray, which showed significant enhancement of the rice plant growth, along with chlorophyll, proteins and carotenoid contents. These results recommend that endophytic mediated ZnO-NPs are biocompatible and possess significant potential for agricultural applications.

Insights into ZnO-based doped porous nanocrystal frameworks

Colloidal nanocrystals play a vital role in several applications. The doping of cations in the nanocrystal matrix enhances the optical, electrical, and magnetic properties. The number and well-defined distribution of the dopant are crucial to protect the nanocrystal from clustering. The XRD, XPS, and XAS instruments reveal the change in the lattice parameters, chemical states, and local coordination environment information. In addition of detecting the position and distribution of the dopant, the 4D-STEM detector mode gathers all types of real-space atomic-resolution images by collecting all diffraction datasets from each electron probe with high-speed and efficient detection. Dopant-host ligand type, reactions conditions, and reaction time optimization during synthesis are critical for the host and dopant reactivity balance. Pearson's hard/soft acids/bases theory would be a base for balancing the solubility of the dopant-host in the given solvents/surfactant. In addition, tuning the colloidal nanocrystals to secondary structures, which enhances the mass-/ions transport, can contribute a combination of properties that do not exist in the original constituents.

Visible-Light-Driven Photocatalytic Inactivation of Bacteria, Bacteriophages, and Their Mixtures Using ZnO-Coated HDPE Beads as Floating Photocatalyst

Semiconductor materials used as photocatalysts are considered among the most effective ways to treat biologically polluted water. Certainly, efficiency depends on the selection of photocatalyst and its substrate, as well as the possibility of its application in a broader spectrum of light. In this study, a reactive magnetron sputtering technique was applied for the immobilisation of ZnO photocatalyst on the surface of HDPE beads, which were selected as the buoyant substrates for enhanced photocatalytic performance and easier recovery from the treated water. Moreover, the study compared the effect on the inactivation of the microorganism between ZnO-coated HDPE beads without Ni and with Ni underlayer. Crystal structure, surface morphology, and chemical bonds of as-deposited ZnO films were investigated by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. Visible-light-induced photocatalytic treatment was performed on the Gram-negative and Gram-positive bacteria and bacteriophages PRD1, T4, and their mixture. Higher bacteria inactivation efficiency was obtained using the ZnO photocatalyst with Ni underlayer for the treatment of S. Typhimurium and M. Luteus mixtures. As for infectivity of bacteriophages, T4 alone and in the mixture with PRD1 were more affected by the produced photocatalyst, compared with PRD1.

Exploring the photoexcited electron transfer dynamics in artificial sunscreen PBSA-coupled biocompatible ZnO quantum dots

Frequent exposure to ultraviolet (UV) radiation without any protection turns out to be a fatal threat leading to skin cancer, necessitating the use of sunscreen cosmetic product with enhanced efficiency to dissipate the UV absorbed energy.

Elimination of rhodamine B from textile wastewater using nanoparticle photocatalysts: A review for sustainable approaches

Rhodamine B (RhB) dye used in the textile industries is associated with carcinogenic and neurotoxic effects with a high potential to cause a variety of human diseases. Semiconductor photocatalysts synthesised through agriculture waste extracts exhibited high efficiency for RhB removal. The current review aimed to explore the efficiency and mechanism of RhB degradation using different photocatalysts that have been used in recent years, as well as the effect of various factors on the removal process. Zinc oxide nanoparticles (ZnO NPs) synthesised from plant extract is the most effective for the RhB degradation with the efficiency reaching 100% after 210 min. The photocatalysis process depends on the pH because pH changes the balance of water dissociation, which impacts the formation of hydroxyl radicals and the surface load of the catalyst. Analysis using Jupyter Notebook revealed a strong correlation between the concentration of ZnO NPs and the photocatalysis efficiency (R = 0.72). These findings reveal that man-sized photocatalysts have a high potential for removing RhB from the wastewater.

Mechanistic insights into defect chemistry and tailored photoluminescence and photocatalytic properties of aliovalent cation substituted Zn0.94M0.06-xLixO (M: Fe3+, Al3+, Cr3+) nanoparticles

In this work, we demonstrate the microwave assisted solution combustion synthesis of aliovalent cation substituted Zn_0.94M_0.06-xLi_xO (M: Fe³⁺, Al³⁺, Cr³⁺) nanoparticles. The structural features, photoluminescence and photocatalytic properties were characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and UV-visible and photoluminescence (PL) techniques. We have introduced aliovalent cations such as reducible Fe³⁺, stable Al³⁺ and oxidisable Cr³⁺ ions into ZnO and investigated its structural and optical properties. The charge balance and defect stoichiometric composition of ZnO were also studied by co-doping with Li⁺ ions. By understanding the photoluminescence and photocatalytic activity of doped and co-doped ZnO nanoparticles, the defect chemistry of ZnO is explained in detail. The photocatalytic efficiency of various doped and co-doped ZnO catalysts was compared with respect to the degradation of rhodamine B dye. Among them, the CZO, AZO and L3AZO catalysts showed enhanced photo-degradation efficiencies of 98.1%, 97.6% and 96.6%, respectively, which are high as compared to that of ZnO (89%). This work presents a novel and straightforward, low-cost, tunable and scalable fabrication protocol for highly efficient ZnO-based photocatalysts for practical applications.

Excitonic properties of layer-by-layer CVD grown ZnO hexagonal microdisks

We have investigated the excitonic properties of highly crystalline ZnO hexagonal microdisks grown by the chemical vapour deposition technique. It was observed that a suitable negative catalyst like chlorine suppresses the crystal growth along the (0001) direction. We propose a qualitative model for the experimentally observed layer-by-layer growth mechanism of the microdisks. Room temperature photoluminescence of the microdisks manifests a very high near-band-edge (NBE) emission peak in the UV region and a minor defect peak in the visible region. The excitonic emission of the microdisks was studied using the low-temperature photoluminescence down to 83 K, which reveals a surface exciton peak in the NBE region and well fitted higher-order phonon replicas.

The impact of surface Cu2+ of ZnO/(Cu1-x Zn x )O heterostructured nanowires on the adsorption and chemical transformation of carbonyl compounds

The surface cation composition of nanoscale metal oxides critically determines the properties of various functional chemical processes including inhomogeneous catalysts and molecular sensors. Here we employ a gradual modulation of cation composition on a ZnO/(Cu1-x Zn x )O heterostructured nanowire surface to study the effect of surface cation composition (Cu/Zn) on the adsorption and chemical transformation behaviors of volatile carbonyl compounds (nonanal: biomarker). Controlling cation diffusion at the ZnO(core)/CuO(shell) nanowire interface allows us to continuously manipulate the surface Cu/Zn ratio of ZnO/(Cu1-x Zn x )O heterostructured nanowires, while keeping the nanowire morphology. We found that surface exposed copper significantly suppresses the adsorption of nonanal, which is not consistent with our initial expectation since the Lewis acidity of Cu2+ is strong enough and comparable to that of Zn2+. In addition, an increase of the Cu/Zn ratio on the nanowire surface suppresses the aldol condensation reaction of nonanal. Surface spectroscopic analysis and theoretical simulations reveal that the nonanal molecules adsorbed at surface Cu2+ sites are not activated, and a coordination-saturated in-plane square geometry of surface Cu2+ is responsible for the observed weak molecular adsorption behaviors. This inactive surface Cu2+ well explains the mechanism of suppressed surface aldol condensation reactions by preventing the neighboring of activated nonanal molecules. We apply this tailored cation composition surface for electrical molecular sensing of nonanal and successfully demonstrate the improvements of durability and recovery time as a consequence of controlled surface molecular behaviors.

Journey of ZnO quantum dots from undoped to rare-earth and transition metal-doped and their applications

Currently, developments in the field of quantum dots (QDs) have attracted researchers worldwide. A large variety of QDs have been discovered in the few years, which have excellent optoelectronic, antibacterial, magnetic, and other properties. However, ZnO is the single known material that can exist in the quantum state and can hold all the above properties. There is a lot of work going on in this field and we will be shorthanded if we do not accommodate this treasure at one place. This manuscript will prove to be a milestone in this noble cause. Having a tremendous potential, there is a developing enthusiasm toward the application of ZnO QDs in diverse areas. Sol-gel method being the simplest is the widely-favored synthetic method. Synthesis via this method is largely affected by a number of factors such as the reaction temperature, duration of the reaction, type of solvent, pH of the solution, and the precipitating agent. Doping enhances the optical, magnetic, anti-bacterial, anti-microbial, and other properties of ZnO QDs. However, doping elements reside mostly on the surface of the QDs. The presence of doping elements inside the core is still a major challenge for doping techniques. In this review article, we have focused on pure, rare-earth, and transition metal-doped ZnO QD properties, and the various synthetic processes and applications. Quantum confinement effect is present in nearly every aspect of the QDs. The effect of quantum confinement has also been summarized in this manuscript. Furthermore, the doping of rare earth elements and transition metal, synthetic methods for different organic molecule-capped ZnO QDs, mechanisms for reactive oxygen species (ROS) generation, drug delivery system for cancer treatment, and many more application are discussed in this paper.

Recent Advances in Zinc Oxide Nanostructures with Antimicrobial Activities

This article reviews the recent developments in the synthesis, antibacterial activity, and visible-light photocatalytic bacterial inactivation of nano-zinc oxide. Polycrystalline wurtzite ZnO nanostructures with a hexagonal lattice having different shapes can be synthesized by means of vapor-, liquid-, and solid-phase processing techniques. Among these, ZnO hierarchical nanostructures prepared from the liquid phase route are commonly used for antimicrobial activity. In particular, plant extract-mediated biosynthesis is a single step process for preparing nano-ZnO without using surfactants and toxic chemicals. The phytochemical molecules of natural plant extracts are attractive agents for reducing and stabilizing zinc ions of zinc salt precursors to form green ZnO nanostructures. The peel extracts of certain citrus fruits like grapefruits, lemons and oranges, acting as excellent chelating agents for zinc ions. Furthermore, phytochemicals of the plant extracts capped on ZnO nanomaterials are very effective for killing various bacterial strains, leading to low minimum inhibitory concentration (MIC) values. Bioactive phytocompounds from green ZnO also inhibit hemolysis of Staphylococcus aureus infected red blood cells and inflammatory activity of mammalian immune system. In general, three mechanisms have been adopted to explain bactericidal activity of ZnO nanomaterials, including direct contact killing, reactive oxygen species (ROS) production, and released zinc ion inactivation. These toxic effects lead to the destruction of bacterial membrane, denaturation of enzyme, inhibition of cellular respiration and deoxyribonucleic acid replication, causing leakage of the cytoplasmic content and eventual cell death. Meanwhile, antimicrobial activity of doped and modified ZnO nanomaterials under visible light can be attributed to photogeneration of ROS on their surfaces. Thus particular attention is paid to the design and synthesis of visible light-activated ZnO photocatalysts with antibacterial properties.

Interactions of Zinc Oxide Nanostructures with Mammalian Cells: Cytotoxicity and Photocatalytic Toxicity

This article presents a state-of-the-art review and analysis of literature studies on the morphological structure, fabrication, cytotoxicity, and photocatalytic toxicity of zinc oxide nanostructures (nZnO) of mammalian cells. nZnO with different morphologies, e.g., quantum dots, nanoparticles, nanorods, and nanotetrapods are toxic to a wide variety of mammalian cell lines due to in vitro cell-material interactions. Several mechanisms responsible for in vitro cytotoxicity have been proposed. These include the penetration of nZnO into the cytoplasm, generating reactive oxygen species (ROS) that degrade mitochondrial function, induce endoplasmic reticulum stress, and damage deoxyribonucleic acid (DNA), lipid, and protein molecules. Otherwise, nZnO dissolve extracellularly into zinc ions and the subsequent diffusion of ions into the cytoplasm can create ROS. Furthermore, internalization of nZnO and localization in acidic lysosomes result in their dissolution into zinc ions, producing ROS too in cytoplasm. These ROS-mediated responses induce caspase-dependent apoptosis via the activation of B-cell lymphoma 2 (Bcl2), Bcl2-associated X protein (Bax), CCAAT/enhancer-binding protein homologous protein (chop), and phosphoprotein p53 gene expressions. In vivo studies on a mouse model reveal the adverse impacts of nZnO on internal organs through different administration routes. The administration of ZnO nanoparticles into mice via intraperitoneal instillation and intravenous injection facilitates their accumulation in target organs, such as the liver, spleen, and lung. ZnO is a semiconductor with a large bandgap showing photocatalytic behavior under ultraviolet (UV) light irradiation. As such, photogenerated electron-hole pairs react with adsorbed oxygen and water molecules to produce ROS. So, the ROS-mediated selective killing for human tumor cells is beneficial for cancer treatment in photodynamic therapy. The photoinduced effects of noble metal doped nZnO for creating ROS under UV and visible light for killing cancer cells are also addressed.

Effects of Copper Dopants on the Magnetic Property of Lightly Cu-Doped ZnO Nanocrystals

To explore the origin of magnetism, the effect of light Cu-doping on ferromagnetic and photoluminescence properties of ZnO nanocrystals was investigated. These Cu-doped ZnO nanocrystals were prepared using a facile solution method. The Cu²⁺ and Cu⁺ ions were incorporated into Zn sites, as revealed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). At the Cu concentration of 0.25 at.%, the saturated magnetization reached the maximum and then decreased with increasing Cu concentration. With increasing Cu concentration, the photoluminescence (PL) spectroscopy indicated the distribution of V_O⁺ and V_O⁺⁺ vacancies nearly unchanged. These results indicate that Cu ions can enhance the long-range ferromagnetic ordering at an ultralow concentration, but antiferromagnetic “Cu⁺-Vo-Cu²⁺” couples may also be generated, even at a very low Cu-doping concentration.

Permanent photodoping of plasmonic gallium-ZnO nanocrystals

Donor dopants in oxide semiconductors are compensated not only by valuable electrons but also by other point defects, leading to a decrease in electric conductivity and infrared absorption. We demonstrate that the electron compensation mechanism in Ga doped ZnO nanocrystals can be promoted by photodoping. Unexpectedly, the electrons from photodoping are stable in the open air for months.

Investigations of the optical and electronic effects of silicon and indium co-doping on ZnO thin films deposited by spray pyrolysis

Silicon and indium co-doped ZnO thin films with both high optical and electrical performances have been successfully synthesised for the first time by the technique of spray pyrolysis. We find that this co-doping strategy can achieve comparable Figures-of-Merit performances to indium zinc oxide itself, but with, importantly, a significant saving in the indium content. The properties of the co-doped films are compared with those of either single indium or silicon doping.