Highly Effective Removal of Tetracycline from Water by Hierarchical Porous Carbon: Batch and Column Adsorption

Comparing different versions of the Yoon-Nelson model in describing organic micropollutant adsorption within fixed bed adsorbers

The Yoon-Nelson model serves as a widely used tool for describing the breakthrough behavior of organic micropollutants within fixed bed adsorbers. This study aims to augment its modeling efficacy through two proposed refinements found in the literature: a logarithmic transformation and the incorporation of steric hindrance effects. We systematically evaluated the original Yoon-Nelson model alongside the modified versions, using breakthrough data associated with micropollutant adsorption on solid materials. Three distinct cases were scrutinized: (1) caffeine adsorption on activated carbon; (2) tetracycline adsorption on hierarchical porous carbon; and (3) diclofenac adsorption on organoclay. While all three models demonstrated comparable performance with highly symmetric breakthrough data in case 1, their efficacy diverged significantly when confronted with strongly asymmetric breakthrough data in cases 2 and 3. The original Yoon-Nelson model and the logarithmically modified version fell short in accurately representing these intricate breakthrough curves. In contrast, the version incorporating steric hindrance effects showcased substantial accuracy, outperforming other models in capturing the complexities of asymmetric breakthrough data. This advancement markedly enhances the modeling accuracy and versatility of the Yoon-Nelson model, particularly in assessing the dynamic behavior of organic micropollutants within fixed bed adsorbers.

Enhanced tetracycline degradation with TiO2/natural pyrite S-scheme photocatalyst

In this study, TiO2 nanoparticles were employed as a photocatalyst for the degradation of tetracycline (TC) under visible light irradiation. The TiO2 nanoparticles were decorated on natural pyrite (TiO2/NP) and characterized using XRD, FTIR, and SEM-EDX methods. This study evaluated the impacts of various operational parameters such as pH, catalyst dosage, initial TC concentration, and light intensity on TC removal. The findings revealed that under optimal conditions (pH 7, catalyst: 2 g/L, TC: 30 mg/L, and light intensity: 60 mW/cm2), 100% of TC and 84% of TOC were removed within 180 min. The kinetics of TC elimination followed a first-order model. The dominant oxidation species involved in the photocatalytic elimination of TC was found to be ·OH radicals in the TiO2/NP system. The reuse experiments showed the high capability of the catalyst after four consecutive cycles. This study confirmed that the TiO2/NP system has high performance in photocatalytic TC removal under optimized experimental conditions.

Hydrothermal Pretreatment of KOH for the Preparation of PAC and Its Adsorption on TC

The environment has been heavily contaminated with tetracycline (TC) due to its excessive use; however, activated carbon possessing well-developed pores can effectively adsorb TC. This study synthesized pinecone-derived activated carbon (PAC) with high specific surface area (1744.659 cm²/g, 1688.427 cm²/g) and high adsorption properties (840.62 mg/g, 827.33 mg/g) via hydrothermal pretreatment methods utilizing pinecones as precursors. The results showed that PAC treated with 6% KOH solution had excellent adsorption properties. It is found that the adsorption process accords with the PSO model, and a large amount of C=C in PAC provides the carrier for π-πEDA interaction. The results of characterization and the isothermal model show that TC plays a key role in the adsorption process of PAC. It is concluded that the adsorption process of TC on PAC prepared by hydrothermal pretreatment is mainly pore filling and π-πEDA interaction, which makes it a promising adsorbent for TC adsorption.

Recent Advances in Carbon-Based Materials for Adsorptive and Photocatalytic Antibiotic Removal

Antibiotics have been a primary environmental concern due to their widespread dispersion, harmful bioaccumulation, and resistance to mineralization. Unfortunately, typical processes in wastewater treatment plants are insufficient for complete antibiotic removal, and their derivatives in effluent can pose a threat to human health and aquatic communities. Adsorption and photocatalysis are proven to be the most commonly used and promising tertiary treatment methods. Carbon-based materials, especially those based on graphene, carbon nanotube, biochar, and hierarchical porous carbon, have attracted much attention in antibiotic removal as green adsorbents and photocatalysts because of their availability, unique pore structures, and superior physicochemical properties. This review provides an overview of the characteristics of the four most commonly used carbonaceous materials and their applications in antibiotic removal via adsorption and photodegradation, and the preparation of carbonaceous materials and remediation properties regarding target contaminants are clarified. Meanwhile, the fundamental adsorption and photodegradation mechanisms and influencing factors are summarized. Finally, existing problems and future research needs are put forward. This work is expected to inspire subsequent research in carbon-based adsorbent and photocatalyst design, particularly for antibiotics removal.

Sodium alginate/magnetic hydrogel microspheres from sugarcane bagasse for removal of sulfamethoxazole from sewage water: Batch and column modeling

Magnetic carbon were synthesized from sugarcane bagasse using hydrothermal carbonization followed by thermal activation was converted to solid state as beads (hydrogels SACFe) using sodium alginate and applied as adsorbent in removal sulfamethoxazole in batch and column mode. From adsorption parameter analysis it was confirmed that 0.6 g L^-1 SACFe was effective in removing 50 mg L^-1 of SMX at pH 6.2. Sorption of SMX on SACFe beads followed Elovich kinetics and Freundlich isotherm. It was further confirmed that sorption occurred on heterogeneous surface of SACFe beads with chemisorption as rate limiting step. Maximum adsorption capacity was obtained as 58.439 mg g^-1 pH studies revealed that charged assisted hydrogen bonding, EDA interactions are some of the mechanism that favoured removal of SMX. From column studies it was found that bead height of 2 cm and flow rate of 1.5 mL min^-1 found to be best in removing pollutant. Thomas model fitted better the experimental data stating that improved interaction between adsorbent and adsorbate act as major driving force tool in obtaining maximum sorption capacity. Breakthrough curve was completely affected by varied flow rate and bed height. Column adsorption was effective in reducing COD and BOD levels of sewage which are affected by toxic pollutants and miscellaneous compounds. Feasibility analysis showed that SACFe beads could be employed for real-time applications as it is cost, energy effective and easy recovery.

Photocatalytic degradation of organic pollutants in water by N-doping ZnS with Zn vacancy: enhancement mechanism of visible light response and electron flow promotion

In order to improve the visible light response, N-doping ZnS (N-ZnS) nanospheres with Zn vacancy and porous surface were prepared by a simple one-pot hydrothermal method. Characterizations and density functional theory simulations showed excellent visible light response of N-ZnS. N-doping introduced impurity energy levels, which led to orbital hybridization and changed the original dipole moment. The presence of ortho Zn vacancy (O-Znv) can effectively reduce e--h+ recombination and photocorrosion. Furthermore, O-Znv caused lattice distortion (twisted the -S-Zn-N-(O-Znv)-S-Zn-S- chemical bond chain), resulting in "vacancy effect" to accelerate e- flow. Under visible light, the photocatalytic degradation efficiency of tetracycline (TC) and 2,4-dichlorophenol (2,4-DCP) was 90.31% and 60.84%, respectively. TOC degradation efficiency was 31.4% and 25.6%, respectively. Combined with Fukui index and LC-MS methods, it was found that TC and 2,4-DCP were degraded under the constant attack of active substances such as ·OH. This work can provide a reference for the application of catalytic materials in the field of visible light photocatalysis.

HKUST-1 derived carbon adsorbents for tetracycline removal with excellent adsorption performance

As the abuse of antibiotics has led to increasingly serious environmental pollution problems, studies have found that the adsorption method can be used to efficiently and quickly remove residual antibiotics in water with low cost and high efficiency. Metal-organic frameworks and their derived porous carbons have received widespread attention as a new type of adsorption material. In this study, HKUST-1 was synthesized by a hydrothermal method and carbonized to HDC-350 at 350 °C under an oxygen-free atmosphere. Through adsorption experiments, HDC-350 is found to show a superior adsorption effect for tetracycline (TC), with an adsorption capacity that reaches 136.88 mg g^-1. The TC adsorption mechanism was studied through characterization and analysis of HDC-350. The adsorption of TC by HDC-350 mainly relies on electrostatic attraction, hydrogen bonding, metal-organic complexation, and intermolecular interactions. This study shows that HKUST-1-derived porous carbon can be used to improve the water stability of HKUST-1, and, at the same time, can effectively adsorb TC in solution, which provides good conditions for practical research applications in the future.

Preparation of 2D supramolecular material doping with TiO2 for degradation of tetracycline

Anatase TiO₂ photocatalyst supported on [BMPP]₂[2D-Mo₁₈O₅₆] (BMPP = 1, 3-bis(4-methylpyridine) propane dibromide) was successfully prepared by hydrothermal method. The composites were characterized by field emission scanning electron microscopy (SEM), X-ray diffractometer (XRD), infrared spectroscopy (IR) and energy-dispersive X-ray spectrometer (EDS). The results show that the high content anatase nanoparticles are uniformly loaded on the polyacid supramolecules to form the composite material. The photocatalytic activity of TiO₂/Mo₉O₂₈-BMPP towards the tetracyclines (TCs), a model pollutant, has been investigated. The results show that under a 500W high-pressure xenon lamp, 0.15 g TiO₂/MoB can degrade 97% of 20 mL (25 mg/L) Tc after 115 min, showing high catalytic activity. In addition, 0.15-TiO₂/MoB can be easily separated from the reaction system by centrifugation, and the catalyst still maintains high photocatalytic activity after 3 cycles of tests under the same conditions. This shows that it has the potential for recycling. This research provides a new way for the development of new supported catalysts.

Preparation of mesoporous batatas biochar via soft-template method for high efficiency removal of tetracycline

In this contribution, we apply a soft-template-assisted hydrothermal route using polyethylene-polypropylene glycol (F127) as soft-template agent and biomass batatas as carbon precursor to synthesis a novel hydrothermal mesoporous biochar (HMC-800) for adsorptive removal of tetracycline (TC) from wastewater. We use the biochar prepared without F127 and direct pyrolytic biochar for comparison. The physicochemical properties of all the studied biochar samples are measured using a suite of characterization techniques. Our results show that the HMC-800 displays the highest specific surface area (286.3 m²/g) and total pore volume (0.249 cm³/g), manifesting the introduction of F127 can result in formation of well-developed pore structures. Regarding adsorption properties, the HMC-800 outperforms other biochar samples for TC removal. Our finding shows that solution with near-neutral pH is favorable for TC removal, and the highest adsorption capacity is observed at initial solution pH value 7. In addition, our findings show that applying the pseudo-second-order kinetic and Freundlich isotherm equation closely models the recorded adsorption behavior. The maximum adsorption capacity is measured to be as much as 238.7 mg/g by Langmuir isotherm model. Pore filling, hydrogen-bonding and n-π interaction are suggested to be the prevailing adsorption mechanisms compared to the other mechanisms. Furthermore, the HMC-800 performs better in regeneration and reuse experiments, making it a promising adsorbent material for TC removal from wastewater.

Highly effective adsorption of antibiotics from water by hierarchically porous carbon: Effect of nanoporous geometry

Pharmaceutical antibiotics have recently become emerging environmental contaminants. To enhance the removal efficiency of antibiotics in water, hierarchically porous carbons (HPCs) with designed porous patterns are used in both batch and column mode adsorption processes in this study, and the role of their nanoporous geometry in the adsorption dynamics are explored. THPC (HPC with trimodal pores) and DHPC (HPC with bimodal pores) exhibit remarkably superior adsorption performances to the selected antibiotics than those of commercial activated carbon (AC) with similar surface area, especially in column mode adsorption. The effective treatment volumes of the HPC-columns remain up to 8-10 times those of the AC-columns for the removal of tetracycline and 4-6 times for the removal of tylosin. The mass transfer rates of the carbon-based columns present the order of THPC > DHPC > AC. As comparison, the columns based on monomodal mesoporous carbon (MEC) and microporous carbon (MAC) exhibit low effective treatment volumes although their high mass transfer speed. The interconnected meso/macropores in HPCs benefit the intraparticle mass transfer of guest molecules and the accessibility of adsorption sites. The micropores linking to the meso/macropores not only provide adsorption sites but also facilitate adsorption affinity.

Self-propagating synthesis of Zn-loaded biochar for tetracycline elimination

Herein, a novel Zn-loaded biochar (Zn-LBC) originating from Fraxinus pennsylvanica Marsh leaves was successfully prepared through a simple and rapid self-propagating combustion reaction (SHS) and could serve as an efficient adsorbent for tetracycline (TC) elimination from water. The adsorption performance was analyzed via a series of characterizations and batch adsorption experiments. The results showed that the novel adsorbent Zn-LBC exhibited an excellent TC adsorption capacity (159.64 mg/g), which was 2.63 times higher than that of the original biochar (60.78 mg/g). The pseudo-second-order kinetic model and Freundlich isothermal model fit the adsorption data well. It is noteworthy that Zn-LBC had little effect on the adsorption capacity of TC in the 0-10 mg/L various coexisting ion range and presence of humic acid (HA). In addition, the adsorption test of TC using hospital wastewater as the water sample also achieved satisfactory results (raw influent: 52.65 mg/g, final effluent: 85.64 mg/g). FT-IR and XPS investigations showed that the TC adsorption mechanism included surface complexation, π-π interactions, and hydrogen bonds. The results provide new ideas for exploring low-cost and highly efficient modified biochar adsorbent for TC elimination.

New amino group functionalized porous carbon for strong chelation ability towards toxic heavy metals

Herein, ethylenediamine functionalized porous carbon (PC-ED/1.5) was synthesized, then characterized by various methods and finally used as a functional material for Cu(ii) and Pb(ii) ion removal from water. XPS revealed the presence of numerous functionalities within the surface of PC including -NH and C-N-C groups. Furthermore, S BET, RS, XRD and FTIR analyses confirmed the changes implemented on the PC surface. Thereafter, a systematic study was implemented to analyze the interactions of the PC-ED/1.5 surface with Cu(ii) and Pb(ii) heavy metal ions. Hence, adsorption experiments showed that the PC-ED/1.5 exhibits maximum adsorption capacities of 123.45 mg g-1 and 140.84 mg g-1 for Cu(ii) and Pb(ii), respectively. Moreover, in situ electrostatic interactions occurring between the divalent cation and the PC-ED/1.5 functional groups was investigated. The mechanism involves chelation processes, electrostatic interactions and mechanical trapping of the metal ions in the adsorbent pores. Interestingly, a synergistic effect of the pores and surface active sites was observed. Finally, by using alginate bio-polymer we prepared membrane films of PC-ED/1.5 which showed long-term stability, regeneration capabilities and high mass recovery.

Photocatalytic Degradation of Tetracycline by ZnO/γ-Fe2O3 Paramagnetic Nanocomposite Material

In recent years, the presence of numerous xenobiotic substances, such as antibiotics, has been detected in water environments. They can be considered as environmental contaminants, even if their effect on human health has yet to be totally understood. Several approaches have been studied for the removal of these kinds of pollutants. Among these compounds, tetracycline (TC), a broad-spectrum antibiotic, is one of the most commonly found in water due to its widespread use. In the context of reducing the presence of TC in aqueous solution, in this contribution, a composite catalyst based on zinc oxide (ZnO) and iron oxide (γ-Fe₂O₃) was developed and its photocatalytic properties were investigated. The catalytic materials were synthesized by a microwave-assisted aqueous solution method and characterized by Field Emission Scanning Electron Microscope (FESEM), X-Ray Fluorescence (XRF) and Brunauer−Emmett−Teller (BET) analysis. The TC concentration was evaluated by spectrophotometer measurements at specific time intervals. The performed photocatalytic experiments clearly demonstrated that the ZnO/γ-Fe₂O₃ composite catalyst presents significant photocatalytic activity, indeed a TC degradation efficiency of 88.52% was registered after 150 min. The presence of iron oxide in the structure of the catalyst enhances both the surface area and the pore volume, facilitating the adsorption of the analyte on the surface of nanostructures, a fundamental phase to optimize a photodegradation process. Moreover, ZnO was found to play the key role in the photocatalytic process assisted by γ-Fe₂O₃ which enhanced the TC degradation efficiency by 20%.

The tetracyclines removal by MgAl layered double oxide in the presence of phosphate or nitrate: Behaviors and mechanism exploration

Pollution of tetracyclines (TCs) in swine wastewater has been a critical concern worldwide. Notably, multiple anions (e.g. PO₄^3-, NO₃^-) coexist in the actual environments, which could significantly influence the TCs removal. In the current study, MgAl layered double oxide (MgAl-LDO) was adopted for investigating the TC removal performance with/without PO₄^3- or NO₃^-. In all systems, the adsorption performance exhibited two different approaches between low and high TC concentrations. In the single system, pseudo-second-order and the Freundlich model fitted well to the equilibrium adsorption data when TC concentration was below 125 mg·L^-1, while the pseudo-first-order and the linear model could describe the removal process at high TC concentration (>125 mg·L^-1). The maximum adsorption capacity was 83.56 mg·g^-1. In the co-existing system, the adsorption capacity was slightly enhanced when TC concentration below 150 mg·L^-1 however was inhibited at high concentration (>150 mg·L^-1). Combined with the characterization analyses, the interaction mechanism at low concentration was primarily surface adsorption on reconstructed LDH from LDO in the TC-alone system. It is worth mention that both PO₄^3- and NO₃^- facilitated the formation of LDH via rehydration of LDO which enhanced surface adsorption in the co-existing system. At high TC concentration, the formation of tetracycline-metal complexes played a dominant role in TC removal in the single system, whereas diminished complexation in the binary system led to the decreased TC removal. This study provides a theoretical and practical guidance for MgAl-LDO on the efficient remediation of actual tetracyclines wastewater.