Porous Metallosalen Hypercrosslinked Ionic Polymers for Cooperative CO2 Cycloaddition Conversion

A Novel POP-Ni Catalyst Derived from PBTP for Ambient Fixation of CO2 into Cyclic Carbonates

The immobilization of homogeneous catalysts has always been a hot issue in the field of catalysis. In this paper, in an attempt to immobilize the homogeneous [Ni(Me₆Tren)X]X (X = I, Br, Cl)-type catalyst with porous organic polymer (POP), the heterogeneous catalyst PBTP-Me₆Tren(Ni) (POP-Ni) was designed and constructed by quaternization of the porous bromomethyl benzene polymer (PBTP) with tri[2-(dimethylamino)ethyl]amine (Me₆Tren) followed by coordination of the Ni(II) Lewis acidic center. Evaluation of the performance of the POP-Ni catalyst found it was able to catalyze the CO₂ cycloaddition with epichlorohydrin in N,N-dimethylformamide (DMF), affording 97.5% yield with 99% selectivity of chloropropylene carbonate under ambient conditions (80 °C, CO₂ balloon). The excellent catalytic performance of POP-Ni could be attributed to its porous properties, the intramolecular synergy between Lewis acid Ni(II) and nucleophilic Br anion, and the efficient adsorption of CO₂ by the multiamines Me₆Tren. In addition, POP-Ni can be conveniently recovered through simple centrifugation, and up to 91.8% yield can be obtained on the sixth run. This research provided a facile approach to multifunctional POP-supported Ni(II) catalysts and may find promising application for sustainable and green synthesis of cyclic carbonates.

Enhancement in the active site exposure in a porphyrin-based PIL/graphene composite catalyst for the highly efficient conversion of CO2

Poly(ionic liquid)s (PILs) have gained widespread attention in recent years due to their excellent properties similar to both ionic liquids and polymers. However, their further applications are limited because abundant and flexible ions easily block nanopores in the PIL catalysts, thus blocking the active sites and ultimately leading to decreased catalytic activity. This work reports the synthesis of a PIL/graphene composite catalyst (iPOP-ZnTPy@GNFs) based on an in situ surface preparation strategy, which effectively controlled the particle size and dispersion state of ionic liquids. The iPOP-ZnTPy@GNFs exhibited a larger surface area and more exposed active sites, which intensified the catalytic activity in the CO₂ cycloaddition reaction with propylene oxide with almost double the reaction rate as compared to that of iPOP-ZnTPy-2 at 100 °C and S/C = 1000. As expected, the iPOP-ZnTPy@GNF catalyst efficiently converted epoxides to cyclic carbonates at room temperature or atmospheric pressure, which can significantly reduce the process cost. In addition, iPOP-ZnTPy@GNFs exhibited excellent broad substrate scope, catalytic diversity, and remarkable reusability. The reaction mechanism of CO₂ cycloaddition was studied via density functional theory calculations and was validated by experimental findings. This work provides a feasible method for improving the utilization of active sites in PILs as a highly robust catalyst for CO₂ cycloaddition and can be further extended to other types of catalytic reactions in practical applications.

Synthesis of Bifunctional Porphyrin Polymers for Catalytic Conversion of Dilute CO2 to Cyclic Carbonates

Development of efficient solid catalysts for catalytic conversion of dilute CO2 is of extreme importance for carbon capture and utilization. We report the synthesis of bifunctional polymers co-incorporated with porphyrin-Zn as Lewis acid sites and Br- as nucleophiles for the cycloaddition of dilute CO2 with epoxides in this work. It was found that the Br-/Zn ratio has a volcano relation with the activity of bifunctional polymers in a cycloaddition reaction, indicating the synergy effect between Lewis acid sites and nucleophiles. The turnover frequency (TOF) of the bifunctional polymer is more than four-fold that of the physical mixture of tetrabutylammonium bromide and porphyrin-Zn-incorporated polymer, implying the enhanced cooperation between Br- and porphyrin-Zn in the polymer network. The bifunctional polymer with optimized Br-/Zn afforded 99% conversion, 99% selectivity, and a TOF as high as 12,000 h-1 for the cycloaddition of CO2 and propylene oxide, which is among the most active solid catalysts ever reported. Furthermore, the bifunctional polymer could efficiently catalyze the cycloaddition of epichlorohydrin with dilute CO2 (7.5% CO2 balanced by N2) even under ambient conditions, demonstrating its potential application in industrial-scale production.

Emerging Ionic Polymers for CO2 Conversion to Cyclic Carbonates: An Overview of Recent Developments

In this mini review, we highlight some key work from the last 2 years where ionic polymers have been used as a catalyst to convert CO2 into cyclic carbonates. Emerging ionic polymers reported for this catalytic application include materials such as poly(ionic liquid)s (PILs), ionic porous organic polymers (iPOPs) or ionic covalent organic frameworks (iCOFs) among others. All these organic materials share in common the ionic moiety cations such as imidazolium, pyridinium, viologen, ammonium, phosphonium, and guanidinium, and anions such as halides, [BF4]–, [PF6]–, and [Tf2N]–. The mechanistic aspects and efficiency of the CO2 conversion reaction and the polymer design including functional groups and porosity are discussed in detail. This review should provide valuable information for researchers to design new polymers for important catalysis applications.

Carbon Dioxide Conversion Upgraded by Host-guest Cooperation between Nitrogen-Rich Covalent Organic Framework and Imidazolium-Based Ionic Polymer

The chemical conversion of CO₂ into value-added chemicals is one promising approach for CO₂ utilization. It is crucial to explore highly efficient catalysts containing task-specific components for CO₂ fixation. Here, a host-guest catalytic system was developed by integrating nitrogen-rich covalent organic framework (TT-COF) and imidazolium-based ionic polymer (ImIP), which serve as hydrogen-bonding donor and nucleophilic agent, respectively, for cooperatively facilitating the activation of the epoxides and subsequent CO₂ cycloaddition. The catalytic activity of the host-guest system was remarkably superior to those of ImIP, TT-COF, and their physical mixture. Furthermore, selective adsorption for CO₂ over N₂ rendered this catalytic system effective for the cycloaddition reaction of the simulated flue gas. The protocols for the unification of two catalytically active components provide new opportunities for the development of composite systems in multiple applications.

Recent Advances on Imidazolium-Functionalized Organic Cationic Polymers for CO2 Adsorption and Simultaneous Conversion into Cyclic Carbonates

The cycloaddition reaction of CO₂ with various epoxides to generate cyclic carbonates is one of the most promising and efficient approaches for CO₂ fixation. Typical imidazolium-based ionic liquids possessing electrophilic cations and nucleophilic halogen anions have been identified as excellent and environmentally friendly candidates for synergistically activating epoxides to convert CO₂ . Therefore, the feasible construction of a series of imidazolium-functionalized organic cationic polymers can bridge the gap between homogeneous and heterogeneous catalysis, thereby obtaining highly selective CO₂ adsorption and simultaneous conversion ability. This Review describes the recent advancements made with regard to the design and synthesis of this type of polymeric networks having imidazolium functionality. They are considered as an outstanding heterogeneous catalyst for the cycloaddition of CO₂ to epoxides. Based on the perspective from the design of building blocks to the synthesis of cationic polymers, the focus mainly lies on how to introduce imidazole units into the material backbone via a covalent linking approach and how to incorporate other active sites capable of activating CO₂ and/or epoxides into such polymeric materials.

Phosphonium-Based Porous Ionic Polymer with Hydroxyl Groups: A Bifunctional and Robust Catalyst for Cycloaddition of CO2 into Cyclic Carbonates

The integration of synergic hydrogen bond donors and nucleophilic anions that facilitates the ring-opening of epoxide is an effective way to develop an active catalyst for the cycloaddition of CO₂ with epoxides. In this work, a new heterogeneous catalyst for the cycloaddition of epoxides and CO₂ into cyclic carbonates based on dual hydroxyls-functionalized polymeric phosphonium bromide (PQPBr-2OH) was presented. Physicochemical characterizations suggested that PQPBr-2OH possessed large surface area, hierarchical pore structure, functional hydroxyl groups, and high density of active sites. Consequently, it behaved as an efficient, recyclable, and metal-free catalyst for the additive and solvent free cycloaddition of epoxides with CO₂. Comparing the activity of PQPBr-2OH with that of the reference catalysts based on mono and non-hydroxyl functionalized polymeric phosphonium bromides suggested that hydroxyl functionalities in PQPBr-2OH showed a critical promotion effect on its catalytic activity for CO₂ conversion. Moreover, PQPBr-2OH proved to be quite robust and recyclable. It could be reused at least ten times with only a slight decrease of its initial activity.