Core–Shell Structured Magnetic γ-Fe2O3@PANI Nanocomposites for Enhanced As(V) Adsorption

Development of nanoscale zero-valent iron embedded on polyaniline reinforced with sodium alginate hydrogel microbeads for effective adsorption of arsenic from apatite soil leachate water

A novel polymeric nanocomposite hydrogel adsorbent was developed to enhance the efficiency of arsenic removal from apatite soil leachate. Apatite soil aqueous leachate was treated with nanoscale zero-valent iron embedded on polyaniline reinforced with sodium alginate hydrogel beads. Various analytical techniques including attenuated total reflection -Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy were employed to characterize these chemically synthesized hydrogel beads. The influence of different types and ratios of adsorbent materials, solution pH, adsorbent dosage, contact time, temperature, initial arsenic concentration, and the presence of co-existing ions on the adsorption process were investigated. Under optimum operating conditions; a pH range of 4-6, 80 mg of sorbent, 180 min contact time led to a remarkable arsenic removal efficiency of approximately 90.33 %. Thermodynamic, adsorption isotherm, and kinetic models provided a good description of the observed experimental results. Compared to the Freundlich and Temkin models, the Langmuir model was found to be the best fit for the experimental data, with a maximum adsorption capacity of 104.167 mg/g. Physical adsorption is mainly responsible for controlling the adsorption of arsenic ions onto the hydrogel. Thermodynamic studies verified that the adsorption process was endothermic and spontaneous.

Dual Z-scheme core-shell PANI-CeO2-Fe2O3-NiO heterostructured nanocomposite for dyes remediation under sunlight and bacterial disinfection

Nowadays, environmental pollution due to discharge of organic pollutants from food, textile, and pharmaceutical industries into clean water and development of contagious diseases due to pathogenic organisms provide impetus to material researcher to fabricate novel design for efficient photocatalyst and antimicrobial agents. In this regard, designing a core-shell heterojunction catalyst based on metal oxides is considered an auspicious approach. In present study, combating the problems of singular oxides, core-shell PANI-CeO₂-Fe₂O₃-NiO nanocomposite (PCFN) and CeO₂-Fe₂O₃-NiO nanocomposite (CFN) was synthesized through sol-gel and oxidative polymerization route with cetyletrimethylammonium bromide (CTAB) as surfactant. The XRD, FTIR, and Raman confirmed the formation of nanocomposites with core-shell morphology composed of PANI (shell) and oxides (Core) in PCFN with a particle size of 52 nm (TEM). Surprisingly, PCFN has lower band gap, e^-/h⁺ recombination, and larger charge transfer character than CFN. The decomposition test using MB and MO dyes showed that PCFN degraded 99%, 98%, while CFN degraded only 73% and 54%, respectively, under 50 min sunlight illumination. The reusability was assessed up to 7th cycle for PCFN. The influence of operational parameters (catalyst dose, dye concentration, pH) was tested for PCFN. Further, the antimicrobial action against S. aureus (gram + ve), E. coli (gram -ve) were also tested. The supreme performance of PCFN has been credited to heterostructure dual Z-scheme formation and core-shell morphology supported with PANI, which suppresses the e^-/h⁺ recombination process by promoting their separation. The present finding indicated that the PCFN is a promising modifier for bacterial disinfection and acts as a superb photocatalyst through core-shell formation with PANI support.

Multilayered TNAs/SnO2/PPy/β-PbO2 anode achieving boosted electrocatalytic oxidation of As(III)

Dealing with arsenic pollution has been of great concern owing to inherent toxicity of As(III) to environments and human health. Herein, a novel multilayered SnO₂/PPy/β-PbO₂ structure on TiO₂ nanotube arrays (TNAs/SnO₂/PPy/β-PbO₂) was synthesized by a multi-step electrodeposition process as an efficient electrocatalyst for As(III) oxidation in aqueous solution. Such TNAs/SnO₂/PPy/β-PbO₂ electrode exhibited a higher charge transfer, tolerable stability, and high oxygen evolution potential (OEP). The intriguing structure with a SnO₂, PPy, and β-PbO₂ active layers provided a larger electrochemical active area for electrocatalytic As(III) oxidation. The as-synthesized TNAs/SnO₂/PPy/β-PbO₂ anode achieved drastically enhanced As(Ⅲ) conversion efficiency of 90.72% compared to that of TNAs/β-PbO₂ at circa 45.4%. The active species involved in the electrocatalytic oxidation process included superoxide radical (•O₂^-), sulfuric acid root radicals (•SO₄^-), and hydroxyl radicals (•OH). This work offers a new strategy to construct a high-efficiency electrode to meet the requirements of favorable electrocatalytic oxidation properties, good stability, and high electrocatalytic activity for As(III) transformation to As(V).

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H3PO4 as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g-1 at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g-1 of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.

Kinetics and Thermodynamics of Hemicellulose Adsorption onto Nanofibril Cellulose Surfaces by QCM-D

The adsorption of hemicellulose derived from bagasse onto nanofibril cellulose has been studied in terms of kinetics and thermodynamics. In situ monitoring of bagasse hemicellulose with different molecular weights onto the nanofibril cellulose surfaces has been investigated using quartz crystal microbalance and dissipation. Then, the adsorption kinetics and thermodynamic properties were analyzed. Also, the sorption behavior and the adsorption layer properties were quantified in aqueous solutions. The maximum adsorption mass was 2.8314 mg/m2 at a concentration of 200 mg/L. Also, compared with that of the low-molecular-weight hemicellulose, the adsorption capacity of the high-molecular-weight hemicellulose was higher, and the adsorption rate changed faster and could reach an equilibrium in a shorter time. The intraparticle diffusion kinetic model represented the experimental data very well. Therefore, the kinetics of hemicellulose on the fiber adsorption was commonly described by a three-stage process: mass to transfer, diffusion, and equilibrium. The Gibbs energy change of the adsorption of hemicellulose was found to range from -20.04 to -49.75 kJ/mol at 25 °C. The entropy change was >0. It was found that the adsorption was spontaneous, and the adsorbed mass increased with the increase in temperature. This strengthened the conclusion that the adsorption process of the bagasse hemicellulose on the NFC was driven by the increase in entropy caused by the release of water molecules due to hydrophobic interaction or solvent reorganization.

MWCNT Decorated Rich N-Doped Porous Carbon with Tunable Porosity for CO2 Capture

Designing of porous carbon system for CO2 uptake has attracted a plenty of interest due to the ever-increasing concerns about climate change and global warming. Herein, a novel N rich porous carbon is prepared by in-situ chemical oxidation polyaniline (PANI) on a surface of multi-walled carbon nanotubes (MWCNTs), and then activated with KOH. The porosity of such carbon materials can be tuned by rational introduction of MWCNTs, adjusting the amount of KOH, and controlling the pyrolysis temperature. The obtained M/P-0.1-600-2 adsorbent possesses a high surface area of 1017 m2 g-1 and a high N content of 3.11 at%. Such M/P-0.1-600-2 adsorbent delivers an enhanced CO2 capture capability of 2.63 mmol g-1 at 298.15 K and five bars, which is 14 times higher than that of pristine MWCNTs (0.18 mmol g-1). In addition, such M/P-0.1-600-2 adsorbent performs with a good stability, with almost no decay in a successive five adsorption-desorption cycles.

N-Doped Porous Carbon Derived from Solvent-Free Synthesis of Cross-Linked Triazine Polymers for Simultaneously Achieving CO2 Capture and Supercapacitors

It is highly desirable to design advanced heteroatomic doped porous carbon for wide application. Herein, N-doped porous carbon (NPC) was developed via the fabrication of high nitrogen cross-linked triazine polymers followed by pyrolysis and activation with controllable porous structure. The as-synthesized NPC at the pyrolysis temperature of 700 °C possessed rich nitrogen content (up to 11.51 %) and high specific surface area (1353 m²  g^-1 ), which led to a high CO₂ adsorption capability at 5.67 mmol g^-1 at 298.15 K and 5 bar pressure and excellent stability. When the activation temperature was at 600 °C, such NPC exhibited a superior electrochemical performance as anode for supercapacitors with a specific capacitance of 158.8 and 113 F g^-1 in 6 M KOH at a current density of 1 and 10 A g^-1 , respectively. Notably, it delivered an excellent stability with capacity retention of 97.4 % at 20 A g^-1 after 6000 cycles.

Synthesis of hierarchically structured ɤ-Fe2O3-PPy nanocomposite as effective adsorbent for cationic dye removal from wastewater

Industrial dye effluents, which are a major wastage component that enter the natural environment, pose a significant health risk to human and aquatic life. Therefore, the effective removal of dye effluents is a major concern. Against this backdrop, in this study, a low-cost, earth-abundant, and ecofriendly ɤ-Fe₂O₃-PPy nanocomposite was prepared employing the conventional hydrothermal method. The morphology, functional groups, and elemental composition of ɤ-Fe₂O₃-PPy were characterized by XRD, SEM, XPS, and FTIR studies. Under optimized conditions, the prepared novel ɤ-Fe₂O₃-PPy nanocomposite showed a high methylene blue (MB) adsorption capacity of 464 mg/g, which is significantly higher than that of existing adsorbents such as CNTs and polymer-modified CNTs. The adsorption parameters such as pH, adsorbent dosage, and ionic strength were optimized to enhance the MB adsorption capacity. The adsorption results revealed that MB is adsorbed onto the adsorbent surface via electrostatic interactions, hydrogen bonding, and chemical binding interactions. In terms of practical application, the adsorbent's adsorption-desorption ability in conjunction with magnetic separation was investigated; the prepared ɤ-Fe₂O₃-PPy nanocomposite exhibited excellent adsorption and desorption efficiencies over more than seven adsorption-desorption cycles.

Synthesis of a hierarchically structured Fe3O4–PEI nanocomposite for the highly sensitive electrochemical determination of bisphenol A in real samples

In this work, a novel, highly sensitive and cost-effective sensing electrode was fabricated for the sensitive detection of bisphenol A in milk and water samples.