Bis-Cyclometalated Iridium Complexes Containing 4,4′-Bis(phosphonomethyl)-2,2′-bipyridine Ligands: Photophysics, Electrochemistry, and High-Voltage Dye-Sensitized Solar Cells

Rational design of efficient photosensitizers based on cyclometalated iridium(III) complexes with 2-arylbenzimidazole and aromatic 1,3-diketone ligands

A judicious selection of substituents in cyclometalating 2-arylbenzimidazoles and an ancillary aromatic 1,3-diketone enabled the creation of heteroleptic iridium(III) complexes demonstrating strong light absorption up to 500 nm (ε ≈ 10 000-12 000 M-1 cm-1). The complexes, which were studied by various spectroscopic techniques, single-crystal X-ray diffraction and cyclic voltammetry, displayed tunable absorption maxima depending on the nature of substituents and their positions. The experimental study was corroborated by quantum chemical calculations, which showed an increased contribution of intraligand charge transfer transitions to the visible light absorption in the case of complexes containing electron-withdrawing substituents in the ligands. Despite being of high intensity, some of these transitions are responsible for the formation of the excited states located at large distances from the 'anchoring' fragment incorporated in the ancillary ligand. In turn, incorporation of electron-donating substituents at the para-position to the Ir-C bonds increases the number of excited states located on the ancillary ligand. The destabilization of the HOMO, which is caused by the increase in the electron-donating ability of the substituents in the metalated rings, translated into negative shifts of the Ir4+/Ir3+ redox potential, affecting, in some cases, the degree of electrochemical reversibility of the complexes. Several complexes having strong light-harvesting characteristics and undergoing reversible oxidation in the appropriate potential range were used for coating the TiO2 photoanodes, which reached an efficiency of 2.15% upon irradiation with the standard AM 1.5 spectrum.

Tailoring the π-system of benzimidazole ligands towards stable light-harvesting cyclometalated iridium(III) complexes

The synthesis, structure, optical and redox properties as well as photovoltaic studies of iridium(III) complexes with cyclometalated 2-arylbenzimidazoles decorated with various polyaromatic fragments and an ancillary aromatic β-diketone are reported. Despite the strong preference of the iridium(III) ion to form bis- or tris-cyclometalated complexes in which the metal participates in five-membered metallacycles, the cyclometalation of the benzimidazole ligands containing rigid π-extended systems yields dimeric complexes containing strained five- or six-membered metallacycles and allows for generating an extremely rare monocyclometalated complex. X-ray crystallography shows that the steric strain observed in the dimers is retained in heteroleptic diketonate complexes which is also corroborated by gas-phase DFT calculations. While emission maxima and redox potentials of the heteroleptic complexes exhibit just a moderate variation upon the change of the cyclometalated ligands, the extension of the π-system of the benzimidazole ligands give the complexes remarkable light absorption in the visible spectral range, which meets the requirements for application in dye-sensitized solar cells. At the titania photoanodes, these iridium dyes retain their optical properties and exhibit power conversion efficiencies under standard AM 1.5 G conditions comparable to those of other iridium-based sensitizers. These results demonstrate that the size and position of the π-extended fragment in cyclometalated ligands can modulate not only the electronic structure of the corresponding iridium(III) complexes, but also affect their composition, structure and reactivity that may find implications in future design of emerging iridium dyes, emitters and catalysts.

A Panchromatic Cyclometalated Iridium Dye Based on 2-Thienyl-Perimidine

Though 2-arylperimidines have never been used in iridium(III) chemistry, the present study on structural, electronic and optical properties of N-unsubstituted and N-methylated 2-(2-thienyl)perimidines, supported by DFT/TDDFT calculations, has shown that these ligands are promising candidates for construction of light-harvesting iridium(III) complexes. In contrast to N-H perimidine, the N-methylated ligand gave the expected cyclometalated μ-chloro-bridged iridium(III) dimer which was readily converted to a cationic heteroleptic complex with 4,4′-dicarboxy-2,2′-bipyridine. The resulting iridium(III) dye exhibited panchromatic absorption up to 1000 nm and was tested in a dye-sensitized solar cell.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Iron Redox Shuttles with Wide Optical Gap Dyes for High-Voltage Dye-Sensitized Solar Cells

A series of iron polypyridyl redox shuttles were synthesized in the 2+ and 3+ oxidation states and paired with a series of wide optical gap organic dyes with weak aryl ether electron-donating groups. High voltage dye-sensitized solar cell (HV-DSC) devices were obtained through controlling the redox shuttle energetics and dye donor structure. The use of aryl ether donor groups, in place of commonly used aryl amines, allowed for the lowering of the dye ground-state oxidation potential which enabled challenging to oxidize redox shuttles based on Fe²⁺ polypyridyl structures to be used in functional devices. By carefully designing a dye series that varies the number of alkyl chains for TiO₂ surface protection, the recombination of electrons in TiO₂ to the oxidized redox shuttle could be controlled, leading to HV-DSC devices of up to 1.4 V.

Neutral Cyclometalated Ir(III) Complexes with Pyridylpyrrole Ligand for Photocatalytic Hydrogen Generation from Water

To explore structure-activity relationships with respect to light-harvesting behavior, a family of neutral iridium complexes [Ir(ppy)₂(L_R)] 1-4 (where ppy = 2-phenylpyridine, and N̂N = 2-(1H-pyrrol-2-yl)pyridine and its functionalized derivatives) were designed and synthesized. The structural modifications in metal complexes are accomplished through the attributions of electron-donating CH₃ in 2, OCH₃ in 3, and electron-withdrawing CF₃ in 4. The structural analysis displays that the pyridylpyrrole acts as one-negative charged bidentated ligand to chelate the iridium center. The electrochemical and photophysical properties of these complexes were systematically studied. The neutral 1-4 as well as the ionic structurally analogous [Ir(ppy)₂(bpy)](PF₆) (5) were utilized as PSs in photocatalytic hydrogen generation from water with [Co(bpy)₃](PF₆)₂ as catalyst and triethanolamine (TEOA) as electron sacrificial agent in the presence of salt LiCl. Complex 1 maintains activity for more than 144 h under irradiation, and the total turnover number is up to 1768. The electrochemical properties and the quenching reaction indicate the H₂ generation by neutral complexes 1-4 is involved exclusively in the oxidative quenching process.

Two Excited State Collaboration of Heteroleptic Ir(III)-Coumarin Complexes for H2 Evolution Dye-Sensitized Photocatalysts

Interfacial electron injection from a photoexcited surface-immobilized dye to a semiconductor substrate is a key reaction for dye-sensitized photocatalysts. We previously reported that the molecular orientation of heteroleptic Ir(III) photosensitizer on the TiO2 nanoparticle surface was important for efficient interfacial electron injection. In this work, to overcome the weak light absorption ability of heteroleptic Ir(III) photosensitizer and to improve the photoinduced charge-separation efficiency at the dye–semiconductor interface, we synthesized two heteroleptic Ir(III) complexes with different coumarin dyes, [Ir(C6)2(H4CPbpy)]Cl and [Ir(C30)2(H4CPbpy)]Cl [Ir-CX; X = 6 or 30; HC6 = 3-(2-enzothiazolyl)-7-(diethylamino)coumarin, HC30 = 3-(2-N-methylbenzimidazolyl)-7-N,N-diethylaminocoumarin, H4CPbpy = 4,4′-bis(methylphosphonic acid)-2,2′-bipyridine], as the cyclometalated ligands and immobilized them on the surface of Pt-cocatalyst-loaded TiO2 nanoparticles. Ultraviolet-visible absorption and emission spectroscopy revealed that the singlet ligand-centered (1LC) absorption and triplet 3LC emission bands of Ir-C30 occurred at shorter wavelengths than those of Ir-C6, while time-dependent density-functional-theory data suggested that the ligand-to-ligand charge transfer (LLCT) excited states of the two complexes were comparable. The photocatalytic H2 evolution activity of the Ir-C6-sensitized Pt-TiO2 nanoparticles (Ir-C6@Pt-TiO2) under visible light irradiation (λ > 420 nm) was higher than that of Ir-C30@Pt-TiO2. In contrast, their activities were comparable under irradiation with monochromatic light (λ = 450 ± 10 nm), which is absorbed comparably by both Ir-CX complexes. These results suggest that the internal conversion from the higher-lying LC state to the LLCT state effectively occurs in both Ir-CX complexes to trigger electron injection to TiO2.

A computational study on second-order nonlinear optical properties based on bis-cyclometalated Ir(iii) complexes: redox and substituent effects

A series of neutral Ir(iii) complexes that possess cyclometalated ligands (C^N) and different ancillary ligands, N-heterocyclic carbene (NHC) and their ionic complexes 1+/−–5+/− have been investigated using density functional theory.

Sterically hindered phenanthroimidazole ligands drive the structural flexibility and facile ligand exchange in cyclometalated iridium(III) complexes

A series of bis-cyclometalated iridium(iii) complexes with 2-arylphenanthroimidazole "antenna" ligands containing electron-donor or withdrawing substituents and a more flexible ancillary aromatic β-diketone bearing the "anchoring" carboxymethyl function has been prepared. Thorough X-ray study of the complexes revealed significant structural strains caused by bulky cyclometalated 2-arylphenanthroimidazoles resulting in dramatic distortions of the iridium octahedron and even in twist of the phenanthrene fragment. The crystal data were corroborated by gas-phase DFT calculations whereby the geometry of the complexes was distorted in the same way. While redox potentials, absorption and emission maxima of the complexes displayed expected change upon the variation of the electron-donating ability of the cyclometalated ligands, the complexes readily exchanged the bidentate ancillary ligand in the presence of a negligible amount of protons that was inspected in solution by UV-Vis spectroscopy. Moreover, after hydrolysis of the carboxymethyl group the resulting complexes readily react with the surface of titanium dioxide giving unique binuclear structures in which the deprotonated carboxy group of the coordinated β-diketonate binds the second bis-cyclometalated unit by forming a four-membered metallacycle. Though the enhanced reactivity of the complexes is contrary to the common idea of the high inertness of iridium(iii) compounds it can be seen as a consequence of the interplay between the steric hindrance induced by the ligands and the strong preference of the iridium(iii) ion for octahedral geometry. This study demonstrates that the use of bulky ligands provides access to light-harvesting iridium(iii) complexes with required extent of lability which may be promising as photocatalysts and biologically active molecules.