Type-II Heterostructure of ZnO and Carbon Dots Demonstrates Enhanced Photoanodic Performance in Photoelectrochemical Water Splitting

Photoelectrochemical Water Splitting: A Visible-Light-Driven CoTiO3@g-C3N4-Based Photoanode Interface Follows the Type II Heterojunction Scheme

Harnessing solar energy can be efficiently used to generate hydrogen by photochemical water splitting, which is a sustainable and environmentally benign energy source. Here, a unique visible-light-driven CoTiO3@g-C3N4 (CTOCN)-based photoanode interface has been optimized and developed with modification to follow the type II heterojunction for the enhancement of photoelectrochemical water splitting. Initially, a graphitic carbon nitride-loaded CoTiO3 (with 10 wt % g-C3N4) composite was obtained using a one-pot solvothermal method. Accordingly, the type II heterojunction interface between g-C3N4 and CoTiO3 has been successfully created and confirmed by the acquired phase, morphological, and optical examinations. Thereby, heterostructure generations with interfacial interaction were enabled to decrease photogenerated electron-hole pair recombination, leading to enhanced charge transfer for water oxidation kinetics. The minimal charge transfer resistance and hole relaxation lifetime (p) shown in Nyquist and Bode plots have further confirmed the rapid electron transport across the electrode/electrolyte interfaces, which is attributed to an enhanced absorption of holes for the water splitting process. Additionally, UV-vis spectroscopy, Mott-Schottky analysis, and UPS studies were used to determine the band edge locations of g-C3N4 and CoTiO3. In comparison to previously developed nanohybrids and their equivalents, the CTOCN-d photoanode follows the type II charge transfer mechanism, resulting in a higher photocurrent density of 55.51 mA cm-2.

Origin of the Improved Photoelectrochemical and Photocatalytic Activity in a ZnO-TiO2 Nanohybrid Revealed by Experimental and Density Functional Theory Studies

Heterojunctions of metal oxides have attracted a great deal of attention as photo (electro) catalysts owing to their excellent photoactivity. While multiple fundamental studies have been dedicated to heteroaggregation, self-assembly of oppositely charged particles to obtain heterojunctions for energy applications has been underexplored. Herein, we report the synthesis of ZnO-TiO2 heterojunctions using the electrostatic self-assembly approach. The synthesized ZnO-TiO2 heterojunctions were characterized by using multiple experimental techniques. Density functional theory calculations were conducted to establish the heterojunction formation mechanism and electronic properties. The ZnO-TiO2 nanohybrid was tested for the photodegradation of rhodamine B dye and water splitting applications. The photocatalytic performance of the ZnO-TiO2 nanohybrid is 3.5 times higher than that of bare ZnO. In addition, the heterostructure exhibited an excellent photocurrent density of 2.4 mA cm-2 at a low onset potential during photoelectrochemical oxygen evolution. The performance improvements are attributed to the formation of the type II heterojunction between ZnO and TiO2, which suppresses carrier recombination and enhances carrier transport, boosting the catalytic activity.

Rational Design of CoOOH/α-Fe2O3/SnO2 for Boosted Photoelectrochemical Water Oxidation: The Roles of Underneath SnO2 and Surface CoOOH

Hematite (α-Fe2O3) photoanode is a promising candidate for efficient PEC solar energy conversion. However, the serious charge recombination together with the sluggish water oxidation kinetics of α-Fe2O3 still restricts its practical application in renewable energy systems. In this work, a CoOOH/α-Fe2O3/SnO2 photoanode was fabricated, in which the ultrathin SnO2 underlayer is deposited on the fluorine-doped tin oxide (FTO) substrate, α-Fe2O3 nanorod array is the absorber layer, and CoOOH nanosheet is the surface modifier, respectively. The resulting CoOOH/α-Fe2O3/SnO2 exhibited excellent PEC water splitting with a high photocurrent density of 2.05 mA cm-2 at 1.23 V vs RHE in the alkaline electrolyte, which is ca. 3.25 times that of bare α-Fe2O3. PEC characterizations demonstrated that SnO2 not only could block hole transport from α-Fe2O3 to FTO substrate but also could efficiently enhance the light-harvesting property and reduce the surface states by controlling the growth process of α-Fe2O3, while the CoOOH overlayer as cocatalysts could rapidly extract the photogenerated holes and provide catalytic active sites for water oxidation. Benefiting from the synergistic effects of SnO2 and CoOOH, the efficiency of the charge recombination and the overpotential for water oxidation of α-Fe2O3 are obviously decreased, resulting in the boosted PEC efficiency for water oxidation. The rational design and simple fabrication strategy display great potentials to be used for other PEC systems with excellent efficiency.

A hair-ball heterostructure of MnS-MnS2/CdS with compact linking interface for ultrasensitive photoelectrochemical bioanalysis of carcinoembryonic antigen

The heterostructured photoelectric material is supposed to markedly promote the photoelectrochemical (PEC) property. Herein, the species heterostructured MnS/CdS and MnS-MnS2/CdS(1∼2) composites derived from Mn-ZIF MOFs via a sulfofication reaction using Cd(NO3)2, CdC12 cadmium source, respectively. Under irradiation, the PEC tests showed that the photocurrent response of MnS-MnS2/CdS(1∼2) signally enhanced compared to globose MnS/CdS heterostructure and pure MnS or CdS. It was ascribed to the matching band-gap to form type II heterojunction in MnS-MnS2/CdS(1∼2) which dramatically facilitated photo-induced electron/hole (e-/h+) separation and transfer. The hair-ball morphologies structure of MnS-MnS2/CdS(1∼2) with large number of pores was beneficial to improve penetrating efficiency of the electrolyte liquid. Meanwhile, the well-synergistic effect on the MnS, MnS2, CdS components and with tight connecting heterojunction interface among MnS-MnS2/CdS(1∼2) which also led to violently photocurrent output. Besides, the chitosan (CS) was covalently coupled with glutaraldehyde (GLD) to obtain steady composite film, and the cross-linker of GLD can achieve the high efficiency to graft the Apt-CEA (aptamer) biomolecules, which resulting in the promotion of hybridization reaction efficiency of the CEA target. Hence, this created biosensor of Apt-CEA/GLD-CS/MnS-MnS2/CdS(1)/ITO for the CEA detection displayed a wide linear range from 0.001 to 18 ng mL-1 and with ultralow detection limit of 0.313 pg mL-1. This research innovatively prepared a contact heterojunction interface with special porosities structure, which had superior PEC nature for the fabrication of high-performance biosensor.

The Emergence of High-Performance Conjugated Polymer/Inorganic Semiconductor Hybrid Photoelectrodes for Solar-Driven Photoelectrochemical Water Splitting

Solar-driven photoelectrochemical (PEC) energy conversion holds great potential in converting solar energy into storable and transportable chemicals or fuels, providing a viable route toward a carbon-neutral society. Conjugated polymers are rapidly emerging as a new class of materials for PEC water splitting. They exhibit many intriguing properties including tunable electronic structures through molecular engineering, excellent light harvesting capability with high absorption coefficients, and facile fabrication of large-area thin films via solution processing. Recent advances have indicated that integrating rationally designed conjugated polymers with inorganic semiconductors is a promising strategy for fabricating efficient and stable hybrid photoelectrodes for high-efficiency PEC water splitting. This review introduces the history of developing conjugated polymers for PEC water splitting. Notable examples of utilizing conjugated polymers to broaden the light absorption range, improve stability, and enhance the charge separation efficiency of hybrid photoelectrodes are highlighted. Furthermore, key challenges and future research opportunities for further improvements are also presented. This review provides an up-to-date overview of fabricating stable and high-efficiency PEC devices by integrating conjugated polymers with state-of-the-art semiconductors and would have significant implications for the broad solar-to-chemical energy conversion research.

3D-ZnO Superstructure Decorated with Carbon-Based Material for Efficient Photoelectrochemical Water-Splitting under Visible-Light Irradiation

The depletion of fossil fuels is a worldwide problem that has led to the discovery of alternative energy sources. Solar energy is the focus of numerous studies due to its huge potential power and environmentally friendly nature. Furthermore, one such area of study is the production of hydrogen energy by engaging photocatalysts using the photoelectrochemical (PEC) method. 3-D ZnO superstructures are extensively explored, showing high solar light-harvesting efficiency, more reaction sites, great electron transportation, and low electron-hole recombination. However, further development requires the consideration of several aspects, including the morphological effects of 3D-ZnO on water-splitting performance. This study reviewed various 3D-ZnO superstructures fabricated through different synthesis methods and crystal growth modifiers, as well as their advantages and limitations. Additionally, a recent modification by carbon-based material for enhanced water-splitting efficiency has been discussed. Finally, the review provides some challenging issues and future perspectives on the improvement of vectorial charge carrier migration and separation between ZnO as well as carbon-based material, using rare earth metals, which appears to be exciting for water-splitting.

Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Carbon-based quantum dots (QDs) have emerged as a fascinating class of advanced materials with a unique combination of optoelectronic, biocompatible, and catalytic characteristics, apt for a plethora of applications ranging from electronic to photoelectrochemical devices. Recent research works have established carbon-based QDs for those frontline applications through improvements in materials design, processing, and device stability. This review broadly presents the recent progress in the synthesis of carbon-based QDs, including carbon QDs, graphene QDs, graphitic carbon nitride QDs and their heterostructures, as well as their salient applications. The synthesis methods of carbon-based QDs are first introduced, followed by an extensive discussion of the dependence of the device performance on the intrinsic properties and nanostructures of carbon-based QDs, aiming to present the general strategies for device designing with optimal performance. Furthermore, diverse applications of carbon-based QDs are presented, with an emphasis on the relationship between band alignment, charge transfer, and performance improvement. Among the applications discussed in this review, much focus is given to photo and electrocatalytic, energy storage and conversion, and bioapplications, which pose a grand challenge for rational materials and device designs. Finally, a summary is presented, and existing challenges and future directions are elaborated.

In Situ Construction of MnO2-Co3O4 Nanosheet Heterojunctions on Co@NCNT Surfaces for Oxygen Evolution

Electrocatalytic water splitting is still circuitous and controversial because of the lack of highly active electrocatalysts to decrease the overpotential. Herein, we report a feasible method for constructing heterojunctions of MnO₂-Co₃O₄ nanosheets on Co@NCNT support surfaces (MnO₂-Co₃O₄/Co@NCNT) by spontaneous redox reactions. Experimental results indicate that Co embedded in Co@NCNT can be used as the carbon support and anchoring sites for heterojunctions, thus exposing a large number of active sites, adjusting the surface electronic structure, changing the OER rate-determining step of the catalyst, and reducing the reaction energy barrier. Besides, the in situ formation of MnO₂-Co₃O₄ nanosheets on Co@NCNT inhibits the loss and aggregation of the catalyst, leading to robust structural stability. Therefore, the synergistic effects of these factors provide multi-functional active sites to enhance the intrinsic activity and achieve maximum catalytic performances. To deliver a current density of 10 mA cm^-2, the catalyst of MnO₂-Co₃O₄/Co@NCNT achieves an overpotential (η) of 303 mV in 1.0 M KOH media for OER. This simple redox strategy can be easily extended to prepare other ultrathin transition-metal oxide heterojunctions, which could be applied not only for water splitting but also for other energy conversion and storage technologies.

Plasmonic Copper-activated ZnO Microarrays for Efficient Photoelectrocatalytic Applications

In the present work, green synthesized plasmonic copper nanostructures derived from carbon quantum dots (PCQDs) activated ZnO microarrays (MAs) based catalyst system is developed and studied for photocatalytic activity and photoelectrocatalytic water splitting. CQDs are synthesized from pharmaceutical waste and used as a reducing agent to synthesize PCQDs of an average size of 10±2 nm. PCQDs decorated ZnO (PCQDs/ZnO) MAs exhibited enhanced photocurrent density of ∼7.1 mA/cm² at 1.23 V (vs. RHE), which is ∼11 fold to ZnO MAs alone (0.65 mA/cm² ). The catalyst exhibits an ABPE of 1.07% at 0.7 V (vs. RHE), IPEC of 8.8% for 450 nm, and hydrogen production rate of 435 μmol/h. The enhanced PEC characteristics are assigned to the improved photons collection and better charge transfer for their participation in oxidation/reduction reaction. The same is well supported with DFT studies for the PCQDs/ZnO MAs catalyst for the first time.

Photodegradation of oxolinic acid in aquaculture effluents under solar irradiation: is it possible to enhance efficiency by the use of TiO2/carbon quantum dots composites?

Antibiotics, such as oxolinic acid (OXA), in aquaculture effluents contribute to the dissemination of antimicrobial resistance, which makes it urgent to develop efficient and sustainable processes for their removal. Aiming a photocatalytic degradation under solar radiation, different carbon quantum dots (CQDs) were produced in this work through a bottom-up hydrothermal methodology and incorporated into TiO₂ by a simple calcination method. A total of thirteen materials were synthesized and tested for OXA photocatalytic removal from synthetic and real matrices. Among them, CQDs produced with citric acid and incorporated into TiO₂ at 4% (w/w) (TiO₂/CQDs-CA 4% (w/w)) were the most efficient photocatalysts, providing an OXA half-life time (t_1/2) decrease of 91%, 79% and 85% in phosphate buffer solution (PBS), synthetic sea salts (SSS) and brackish aquaculture effluent (BAE), respectively. Therefore, the herein synthesized TiO₂/CQDs-CA 4% (w/w) composites have shown to be promising materials for a sustainable solar-driven removal of antibiotics from aquaculture effluents.

Layered Double Hydroxides for Photo(electro)catalytic Applications: A Mini Review

Chemical energy conversion strategies by photocatalysis and electrocatalysis are promising approaches to alleviating our energy shortages and environmental issues. Due to the 2D layer structure, adjustable composition, unique thermal decomposition and memory properties, abundant surface hydroxyl, and low cost, layered double hydroxides (LDHs) have attracted extensive attention in electrocatalysis, photocatalysis, and photoelectrocatalysis. This review summarizes the main structural characteristics of LDHs, including tunable composition, thermal decomposition and memory properties, delaminated layer, and surface hydroxyl. Next, the influences of the structural characteristics on the photo(electro)catalytic process are briefly introduced to understand the structure-performance correlations of LDHs materials. Recent progress and advances of LDHs in photocatalysis and photoelectrocatalysis applications are summarized. Finally, the challenges and future development of LDHs are prospected from the aspect of structural design and exploring structure-activity relationships in the photo(electro)catalysis applications.

Molecular Imprinted Poly(2,5-benzimidazole)-Modified VO2-CuWO4 Homotype Heterojunction for Photoelectrochemical Dopamine Sensing

A photoactive molecularly imprinted poly(2,5-benzimidazole)-modified vanadium dioxide-cupric tungstate (VO₂-CuWO₄) as an efficient photosensitive n-n type-II heterojunction thin film was electrochemically deposited on Ti substrate for the selective and robust photoelectrochemical (PEC) bioanalysis of dopamine (DA). The optical absorption of n-VO₂/n-CuWO₄ type-II heterojunction was capably broadened toward the visible region, which permitted superior light-harvesting and robust carriers generation, separation, and transfer processes significantly enhancing the anodic photocurrent, as confirmed by a series of PEC analyses. Findings revealed that the as-prepared label-free MIP-PEC sensor can quantitatively monitor DA in a linear range of 1 nM to 200 μM with a detection limit of 0.15 nM. This MIP-PEC sensor showed robust selectivity under conditions with high concentrations of interfering substances, which can be recovered in the real samples of urine, cocoa chocolate, and diluted yogurt, indicating its promising potential applications in biological and food samples. This work not only featured the use of photoelectrically active MIP/VO₂-CuWO₄ for PEC detection of DA, but also provided a new horizon for the design and implementation of functional polymers/metal oxides heterojunction materials in the field of PEC sensors and biosensors.

Strategy to Achieve Augmented Photoelectrochemical Water Oxidation via Heteroband Structure Engineering and In Situ Interface Activation

A simple strategy to achieve remarkable activity of photoelectrochemical (PEC) water oxidation is both a critical requirement prior to accelerating the deployment of hydrogen and an important pursuit for renewable solar energy utilization. Despite various ways to improve the PEC performance, laborious fabrication and a statically driven process for water oxidation are still the most challenging tasks. We, herein, demonstrated an extremely simple but extraordinary effective strategy to boost PEC water splitting in a three-dimensional (3D) network structure (Ni foam, i.e., NF)-supported ZnO nanowire (NW)/CdS nanoparticle (NP) (NF/ZnO/CdS) photoelectrode. On the one hand, the establishment and optimization of a heteroband junction between ZnO NWs and CdS NPs substantially reduce the solar energy loss and increase the photocarrier utilization rate at the interface of two phases. On the other hand, the solution flow rotation in the unique macroporous 3D network structure gives rise to obvious piezoelectric (PE) polarization of ZnO located on the skeleton of Ni foam, which can dynamically enforce directional charge transfer. This real-time self-built PE polarization, assisted by the heteroband junction, enables the NF/ZnO/CdS photoanode system to obtain an improved photocurrent density by 12.2-fold compared with pure ZnO (at 1.23 V vs RHE). This work sheds light on an ingenious design strategy for fabricating photoelectrodes that combines a simplified structure and an effectively enhanced water oxidation performance.

ZnCDs/ZnO@ZIF-8 Zeolite Composites for the Photocatalytic Degradation of Tetracycline

Considering the photocatalytic performance of CDs, ZnO, and the unique porous nanostructure and stability of ZIF-8, we prepared ZnCDs/ZnO@ZIF-8 zeolite composites. The resultant material represented an enhanced ability for the photodegradation of TC compared with that of ZnCDs and ZnO. The photocatalytic degradation efficiency reached over 85%. The catalytic activity of the composites was maintained after four cycles. The experimental result indicated that ⋅O2 radical was the active species in the reaction.

A highly selective and recyclable sensor for the electroanalysis of phosphothioate pesticides using silver-doped ZnO nanorods arrays

Silver-doped ZnO nanorods (Ag/ZnO) arrays have in-situ grown onto indium tin oxide (ITO) via the one-pot hydrothermal route towards a highly selective and recyclable electroanalysis of phosphothioate pesticides (PTs) with phoxim (Phox) as a model. It was discovered that the Ag/ZnO arrays-modified electrode could obtain a steady and sharp electrochemical output of solid-state Ag/AgCl at a low potential (i.e., 0.12 V). More importantly, the achieved Ag/AgCl signals could decrease selectively induced by sulfide (S)-containing Phox by the specific Cl-S displacement reaction, which would trigger AgCl into non-electroactive Ag-Phox complex. The Ag/ZnO arrays-modified sensors present a linear range from 0.050 to 700.0 μM for the detection of Phox, with a limit of detection down to 0.010 μM. The practical applicability of the developed electroanalysis strategy was successfully employed to detect Phox in the tap water and cabbage samples. Moreover, the photocatalytic performances of the Ag/ZnO arrays were subsequently verified for the degradation of Phox, displaying the higher photocatalytic efficiency than pure ZnO nanorods. Besides, the as-developed sensor can allow for the recyclable detection of Phox by the Ag/ZnO-photocatalyzed removal of Phox after each of the detection cycles. Therefore, the sensors platform based on Ag/ZnO arrays can be expected to have potential for the electrochemical monitoring and photocatalytic degradation of toxic pesticides in the food and environmental fields.