Programmable Triboelectric Nanogenerators Dependent on the Secondary Building Units in Cadmium Coordination Polymers

Robust cooperative of cadmium sulfide with highly ordered hollow microstructure coordination polymers for regulating the photocatalytic performance

Accurately controlling and achieving selective reactivity at difficult-to-access reaction sites in organic molecules is challenging owing to the similar local and electronic environments of multiple reaction sites. In this work, we regulated multiple reaction sites in a highly selective and active manner using cobalt coordination polymers (Co-CP) 1 and 1a with various particle sizes and morphologies ranging from large granular to ordered hollow hemispheres by introducing sodium dodecyl sulfate (SDS) as a surfactant. The size and morphology of the catalysts could be tuned by controlling the amount of SDS. An SDS concentration of 0.03 mmol generated 1a having a highly ordered hollow hemispherical microstructure with a well-defined platform as a pre-made building unit. Cadmium sulfide (CdS), as a typical photocatalyst, was subsequently uniformly anchored in-situ on the premade building unit 1a to produce CdS@1a composites, that inherited the originally ordered hollow hemispherical microstructure while integrating CdS as well-dispersed catalytic active sites. Furthermore, the well-established CdS@1a composites were used as photocatalysts in selective oxidation reactions under air atmosphere with blue irradiation. The CdS0.109@1a composite with unique structural characteristics, including uniformly distributed and easily accessible catalytic sites and excellent photoelectrochemical performance, served as a highly efficient heterogeneous photocatalyst for promoting the selective oxidation of sulfides to sulfoxides as the sole products. This work presents an approach for fabricating CPs as premade building units that function as well-defined platforms for integration with photocatalysts, enabling tuning of the structure-selectivity-activity relationships.

Self-driven electrochemical system using solvent-regulated structural diversity of cadmium(II) metal-organic frameworks

Optimizing friction materials based on molecular diversity in a molecular framework system is an effective method to improve the output performance of triboelectric nanogenerators (TENGs). In this study, three cadmium(II) metal-organic frameworks (Cd-MOFs) with different cavities were synthesized solvothermally by the assembly of cadmium nitrate (Cd(NO3)2·4H2O), 4',4'''-carbonylbis(([1,1'-biphenyl]-3,5-dicarboxylic acid)) (H4CBBD), and trans-1,2-bis(4-pyridyl)ethylene (4,4'-bpe) via a solvent-regulated strategy. The topology and porosity of Cd-MOFs could be controlled effectively by the solvent constituents and were demonstrated to be closely related to their triboelectric behaviors. Theoretical calculations and experimental characterizations revealed that the TENGs fabricated by the Cd-MOF with maximum porosity exhibited the best triboelectric performance owing to the enhanced specific surface area and surface potential. In the applications, the high-output TENGs can be successfully used as an efficient power supply for electrochemical systems, enabling the direct bromination of aromatic compounds in high yields with good regioselectivity. This study provides a simple and feasible method to optimize positive friction materials at the molecular level and develops the practical applications of TENGs in electrochemical systems.

Cationic metal-organic framework with charge separation effect as a high output triboelectric nanogenerator material for self-powered anticorrosion

New stable frictional materials based on metal-organic frameworks (MOFs) are greatly desired for applications in self-powered systems. This work reports an ionic MOF material with efficient charge separation mediated by charge induction. ZUT-iMOF-1(Cu) is chemically stable and its triboelectric output performance surpasses those of traditional MOF materials. The short-circuit current of the iMOF triboelectric nanogenerator is 73.79 μA at 5 Hz. The output performance remains stable over 50 000 cycles of continuous operation. The charge and power densities peak at 123.20 μC m-2 and 3133.23 mW m-2. Owing to its high output performance, ZUT-iMOF-1(Cu) effectively prevents metal corrosion in cathodic-protection systems. Theoretical calculations show that increasing the charge-separation effect promotes the frictional electricity generation behaviour. This study provides research suggestions for ionic MOF frictional materials and will promote their application in self-powered electrochemical cathodic-protection systems.

Directed molecular structure design of coordination polymers with different ligands for regulating output performance of triboelectric nanogenerators

A triboelectric nanogenerator (TENG) provides an effective method to harvest mechanical energy from the environment. The morphology and structure of frictional electrode materials of this type of device affect the output performance significantly. Metal-organic coordination polymers (CPs) with special structure advantages offer a vast pool of materials enabling high performances. Two Co-CPs based on terephthalic acid and 2,5-dihydroxyterephthalic acid ligands, respectively, were used to fabricate TENGs. Detailed electrical characterizations of the TENG devices revealed that the introduction of the substituent groups in the organic ligands leads to the structural changes of CPs, which ultimately leads to significant differences in the output performance.

Output Enhancement of Triboelectric Nanogenerators Based on Hierarchically Regular Cadmium Coordination Polymers for Photocycloaddition

Exploiting the well-arranged and tunable frameworks of crystalline materials, we herein report coordination polymers (CPs) with modulated hierarchical structures as triboelectric materials to construct and extend the application scope of triboelectric nanogenerators (TENGs). Different lengths and shapes of bridging ligands [4,4'-bpa = 1,2-bis(4-pyridyl)ethane, 4,4'-bpe = 1,2-bis(4-pyridyl)ethene, and 4,4'-bpp = 1,3-di(2-pyridyl)propane for 1, 2, and 3, respectively] were used to construct Cd-CP-based hierarchical frameworks. These compounds were used as triboelectric materials, and their electronic structure contributions were determined by the output of the corresponding TENGs. The results indicated that 2-TENG with the 4,4'-bpe ligand had the highest output, attributed to the improvement in the electron activity due to the π-conjugation group in the bridging ligand, which was further verified by density functional theory calculations. Furthermore, 2@PVDF (PVDF = polyvinylidene fluoride) composite films with different concentrations of Cd-CP were prepared. Detailed electrical characterizations revealed that the arrangement of 12% active constituents of Cd-CP-2 effectively enhanced the output performance of 2@PVDF-TENG, which could light up an ultraviolet lamp plate to successfully execute the [2 + 2] photocycloaddition.

Enhancement of Output Performance of Triboelectric Nanogenerator by Switchable Stimuli in Metal-Organic Frameworks for Photocatalysis

Precise control of the structure of crystalline materials is an efficient strategy to manipulate the fundamental performance of solids. In metal-organic framework (MOF) materials, this control can be realized by reversible cation-exchange through chemically driven changes in the crystalline state. Herein, we reported that the reversible structural transformations between an anionic Zn-MOF (1) and a topologically equivalent bimetallic Zn/Co-MOF (2) were accomplished. Both MOFs powders and their hybrid composites were used as positive electrode materials to assemble triboelectric nanogenerators (TENGs). The results demonstrated that the output performance of the Zn/Co-MOF-TENG was effectively improved because the introduction of Co ions makes electron transfer easier. Moreover, the output performance of the TENGs based on MOF@PVDF (PVDF = polyvinylidene fluoride) composite films showed that the Zn/Co-MOF@PVDF-TENG possessed much higher output than these corresponding film-based and MOF-based TENGs. As a practical application, the superior output of Zn/Co-MOF@PVDF-TENG was used to light an ultraviolet lamp plate for the [2 + 2] photochemical cycloaddition of organometallic macrocycles.

Flexible Triboelectric Nanogenerators Based on Electrospun Poly(vinylidene fluoride) with MoS2/Carbon Nanotube Composite Nanofibers

With the miniaturization of wearable smart devices, the demand for portable and sustainable power sources is increasing. Herein, a flexible and lightweight triboelectric nanogenerator (PMC-TENG) was fabricated with MoS₂/carbon nanotube (MC)-doped PVDF as the friction substrate based on electrospinning for harvesting random body motion energy under complex mechanical deformations. The charge density on the friction surface of PVDF nanofibers was found to increase significantly as the introduced electron acceptor of the MC composite, and nylon as a clothing material for another friction layer simplifies the structure of the device. Upon optimization of the electrospinning preparation process, the output voltage of the prepared PMC-TENG can reach >300 V and the instantaneous power can reach 0.484 mW (∼6 cm × 6 cm). At the same time, the PMC-TENG remains stable over 3000 cycles and has the ability to charge a capacitor. The flexible device demonstrates an excellent capability of converting mechanical energy to electrical energy. Therefore, this study has good prospects for application in the field of power supply for portable electronic devices and others.

A facile method to enhance the output performance of triboelectric nanogenerators based on coordination polymers by modulating terminal coordination groups

Three isostructural Cu(i)-CPs with different terminal halogen atoms were introduced into the fabrication of TENGs, and were further applied for self-powered electrochemical cathodic protection.

Catalytic C-H Bond Activation and Knoevenagel Condensation Using Pyridine-2,3-Dicarboxylate-Based Metal-Organic Frameworks

Three 1D coordination polymers (CPs) [M(pdca)(H2O)2] n (M = Zn, Cd, and Co; 1-3), and a 3D coordination framework {[(CH3)2NH2][CuK(2,3-pdca)(pa)(NO3)2]} n (4) (2,3-pdca = pyridine-2,3-dicarboxylate and pa = picolinic acid), have been synthesized adopting a solvothermal reaction strategy. The CPs have been thoroughly characterized using various spectral techniques, that is, elemental analyses, FT-IR, TGA, DSC, UV/vis, and luminescence. Structural information on 1-4 was obtained by PXRD and X-ray single-crystal analyses, whereas morphological insights were attained through FESEM, AFM, EDX, HRTEM, and BET surface area analyses. Roughness parameters were calculated from AFM analysis, whereas dimensions of small domains and interplanar spacing were defined with the aid of HRTEM. CPs 1-3 are 1D isostructural networks, whereas 4 is a 3D framework. Moreover, 1-4 display moderate luminescence at rt. In addition, 1-4 have been applied as economic and efficient porous catalysts for the Knoevenagel condensation reaction and C-H bond activation under mild conditions with good yields (95-98 and 97-99%), respectively. Notably, 1-3 can be reused up to seven cycles, whereas 4 can be reused up to five catalytic cycles with retained catalytic efficiency. Relative catalytic efficacy toward the Knoevenagel condensation reaction follows in the order 2 > 1 > 3 > 4, whereas 2 > 4 > 1 > 3 for C-H activation. The present result demonstrates synthetic, structural, optical, morphological, and catalytic aspects of 1-4.