Selectivity Reverse of Hydrosilylation of Aryl Alkenes Realized by Pyridine N-Oxide with [PSiP] Pincer Cobalt(III) Hydride as Catalyst

Synthesis, antimicrobial activity and application of polymers of praseodymium complexes based on pyridine nitrogen oxide

The traditional pyridine nitrogen oxide-based antimicrobial agents are often associated with health risks due to heavy metal enrichment. To mitigate this concern, we synthesized two novel complexes, Pr2(mpo)6(H2O)2 and Pr(hpo)(mpo)2(H2O)2, and integrated rare-earth salts, Hhpo (2-hydroxypyridine-N-oxide) and Nampo (2-mercapto-pyridine-N-oxide sodium salt). These complexes were characterized through infrared analysis, elemental analysis, thermogravimetric analysis, and X-ray crystallographic analysis. Our comparative analyses demonstrate that the synthesized rare-earth complexes exhibit stronger antimicrobial activity against Staphylococcus aureus (S. aureus ATCC6538) and Escherichia coli (E. coli ATCC25922) compared to the ligands and rare-earth salts alone. Quantitative results revealed the lowest inhibitory concentrations of the two complexes against S. aureus ATCC6538 and E. coli ATCC25922 at 3.125 μg mL-1, 6.25 μg mL-1, 3.125 μg mL-1 and 6.25 μg mL-1, respectively. Preliminary investigations indicated that the antibacterial mechanism of these complexes involved promoting intracellular substance exudation to achieve antibacterial effects. Incorporation of these complexes into polymeric antimicrobial films resulted in a potent antimicrobial effect, achieving a 100% inhibition rate against S. aureus ATCC6538 and E. coli ATCC25922 at a low addition level of 0.6 wt%. Our results suggest that nitrogen oxide-based praseodymium complexes have potential for various antimicrobial applications.

Catalytic Properties of [PSiP] Pincer Cobalt(II) Chlorides Supported by Trimethylphosphine for Alkene Hydrosilylation Reactions

In this paper, six silyl [PSiP] pincer cobalt(II) chlorides 1-6 [(2-Ph2PC6H4)2MeSiCo(Cl)(PMe3)] (1), [(2-Ph2PC6H4)2HSiCo(Cl)(PMe3)] (2), [(2-Ph2PC6H4)2PhSiCo(Cl)(PMe3)] (3), [(2-iPr2PC6H4)2HSiCo(Cl)(PMe3)] (4), [(2-iPr2PC6H4)2MeSiCo(Cl)(PMe3)] (5), and [(2-iPr2PC6H4)2PhSiCo(Cl)(PMe3)] (6)) were prepared from the corresponding [PSiP] pincer preligands (L1-L6), CoCl2 and PMe3 by Si-H bond activation. The catalytic activity of complexes 1-6 for alkene hyrdosilylation was studied. It was confirmed that complex 1 is the best catalyst with excellent regioselectivity among the six complexes. Using 1 as the catalyst, the catalytic reaction was completed within 1 h at 50 °C, predominantly affording Markovnikov products for aryl alkenes and anti-Markovnikov products for aliphatic alkene substrates. During the investigation of the catalytic mechanism, the Co(II) hydrides [(2-Ph2PC6H4)2MeSiCo(H)(PMe3)] (8) and [(2-iPr2PC6H4)2MeSiCo(H)(PMe3)] (9) were obtained from the stoichiometric reactions of complex 1 and 5 with NaBHEt3, respectively. Complexes 8 and 9 could also be obtained by the reactions of preligands L1 and L5 with Co(PMe3)4 via Si-H bond cleavage. More experiments corroborated that complex 8 is the real catalyst for this catalytic system. Under the same catalytic conditions as complex 1, using complex 8 as a catalyst, complete conversion of styrene was also achieved in 1 h, and the selectivity remained unchanged. Based on the experimental results, we propose a plausible mechanism for this catalytic reaction. The addition of B(C6F5)3 to catalyst 1 can reverse the selectivity of styrene hydrosilylation from the Markovnikov product as the main product (b/l = 99:1) to the anti-Markovnikov product as the main product (b/l = 40:60). Further study indicated that using the (CoCl2 + L1) system instead of complex 1, the selectivity was changed from Markovnikov to anti-Markovnikov product (b/l = 1:99.7). Therefore, the selectivity for the substrate styrene is influenced by the presence of a PMe3 ligand. The different selectivities may be caused by different active species. For the system of complex 1, a cobalt(II) hydride is the real catalyst, but for the (CoCl2 + L1) system, a cobalt(I) complex is proposed as active species. The molecular structures of Co(II) compounds 5 and 9 were resolved by single-crystal X-ray diffraction.

X-type silyl ligands for transition-metal catalysis

Given the critical importance of novel ligand development for transition-metal (TM) catalysis, as well as the resurgence of the field of organosilicon chemistry and silyl ligands, to summarize the topic of X-type silyl ligands for TM catalysis is highly attractive and timely. This review particularly emphasizes the unique σ-donating characteristics and trans-effects of silyl ligands, highlighting their crucial roles in enhancing the reactivity and selectivity of various catalytic reactions, including small molecule activation, Kumada cross-coupling, hydrofunctionalization, C-H functionalization, and dehydrogenative Si-O coupling reactions. Additionally, future developments in this field are also provided, which would inspire new insights and applications in catalytic synthetic chemistry.

Siloxane-containing phosphine (oxide) ligands for enhanced catalytic activity of cobalt complexes for hydrosilylation reactions

A series of siloxane-containing phosphine (oxide) ligands have been designed and synthesized. These phosphine (oxide) ligands contain silicon atoms, which can impart better solubility in the relevant media, thereby improving certain catalytic performances. The hydrosilylation of olefins catalyzed by these metal phosphine (oxide) complexes has been conducted under mild reaction conditions.

Effects of silylene ligands on the performance of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes

In order to study the effects of silylene ligands on the catalytic activity of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes, readily available model catalysts are required. In this contribution, a comparative study of the hydrosilylation of aldehydes and ketones catalyzed by tris(trimethylphosphine) cobalt chloride, CoCl(PMe₃)₃ (1), and bis(silylene) cobalt chloride, Co(LSi:)₂(PMe₃)₂Cl (2, LSi: = {PhC(N^tBu)₂}SiCl), is presented. It was found that both complexes 1 and 2 are good catalysts for the hydrosilylation of aldehydes and ketones under mild conditions. This catalytic system has a broad substrate scope and selectivity for multi-functional substrates. Silylene complex 2 shows higher activity than complex 1, bearing phosphine ligands, for aldehydes, but conversely, for ketones, the activity of complex 1 is higher than that of complex 2. It is worth noting that in the process of mechanistic studies the intermediates (PMe₃)₃Co(H)(Cl)(PhH₂Si) (3) and (LSi:)₂(PMe₃)Co(H)(Cl)(PhH₂Si) (4) were isolated from the stoichiometric reactions of 1 and 2 with phenylsilane, respectively. Further experiments confirmed that complex 3 is a real intermediate. A possible catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by 1 was proposed based on the experimental investigation and literature reports, and this mechanism was further supported by DFT studies. The bis(silylene) complex 4 showed complicated behavior in solution. A series of experiments were designed to study the catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by complex 2. According to the experimental results, the hydrosilylation of aldehydes catalyzed by 1 proceeds via a different mechanism than that of the analogous reaction with complex 2 as the catalyst. In the case of ketones, complex 4 is a real intermediate, indicating that both 1 and 2 catalyze the reaction by the same mechanism. The molecular structures of 3 and 4 were determined by single crystal X-ray diffraction analysis.

Rare-Earth Metal Complexes Supported by 1,3-Functionalized Indolyl-Based Ligands for Efficient Hydrosilylation of Alkenes

Two different 1,3-functionalized indolyl-based proligands 1-(2-C₄H₇O)CH₂-3-(2-^tBuC₆H₅N═CH)C₈H₅N (HL¹) and 1-Me₂NCH₂CH₂-3-(2-ⁱPrC₆H₅N═CH)C₈H₅N (HL²) were designed, prepared in high yields, and successfully applied to rare-earth metal chemistry showing different reactivities and different bondings with the central metals. The reactions of HL¹ with RE(CH₂SiMe₃)₃(THF)₂ provided two types of rare-earth metal complexes: the pincer type mononuclear complexes κ³-(L¹)RE(CH₂SiMe₃)₂ [L¹ = 1-(2-C₄H₇O)CH₂-3-(2-^tBuC₆H₅N═CH)C₈H₄N, RE = Lu(1), Yb(2)], and the dinuclear rare-earth metal alkyl (per alkyl/per metal) complexes having the ligand in novel coordination modes {(η¹:(μ-η²:η¹):η¹-1-(2-C₄H₇O)CH₂-3-[2-^tBuC₆H₅NCH-(CH₂SiMe₃)]C₈H₄N)RECH₂SiMe₃}₂ [RE = Er(3), Y(4), Dy(5), and Gd(6)]. Meanwhile, the reactions of HL² with RE(CH₂SiMe₃)₃(THF)₂ led to the isolation and characterization of only the mononuclear rare-earth metal dialkyl complexes κ³-(L²)RE(CH₂SiMe₃)₂ [L² = 1-Me₂NCH₂CH₂-3-(2-ⁱPrC₆H₅N═CH)C₈H₄N, RE = Lu(7), Gd(8)] bearing the ligand in the pincer chelate form. The mononuclear complexes were formed through the sp² C-H activation of the 2-indolyl moiety, while the dinuclear complexes were produced unexpectedly through the tandem 2-indolyl sp² C-H activation and C═N insertion into the RE-CH₂SiMe₃ bond. These complexes were fully characterized by spectroscopic methods, elemental analyses, and single-crystal X-ray crystallography. The applications of the synthesized complexes as catalysts for the hydrosilylation of terminal alkenes with phenylsilane are described. Anti-Markovnikov addition products were produced by the hydrosilylation of aliphatic olefins, and Markovnikov addition products were isolated with aromatic olefins with high selectivity in the absence of cocatalysts. It is found that the dinuclear rare-earth alkyl complexes exhibited the best catalytic activity with the advantages of mild reaction conditions, short reaction time, low catalyst loading, and wide substrate applicability in comparison with the synthesized mononuclear complexes and the reported catalysts.

Control over Selectivity in Alkene Hydrosilylation Catalyzed by Cobalt(III) Hydride Complexes

Two new bisphosphine [PCP] pincer cobalt(III) hydrides, [(L¹)Co(PMe₃)(H)(Cl)] (^L11, L¹ = 2,6-((Ph₂P)(Et)N)₂C₆H₃) and [(L²)Co(PMe₃)(H)(Cl)] (^L21, L² = 2,6-((ⁱPr₂P)(Et)N)₂C₆H₃), as well as one new bissilylene [SiCSi] pincer cobalt(III) hydride, [(L³)Co(PMe₃)(H)(Cl)] (^L31, L³ = 1,3-((PhC(^tBuN)₂Si)(Et)N)₂C₆H₃), were synthesized by reaction of the corresponding protic [PCP] or [SiCSi] pincer ligands L¹H, L²H, and L³H with CoCl(PMe₃)₃. Despite the similarities in the ligand scaffolds, the three cobalt(III) hydrides show remarkably different performance as catalysts in alkene hydrosilylation. Among the PCP pincer complexes, ^L11 has higher catalytic activity than complex ^L21, and both catalysts afford anti-Markovnikov selectivity for both aliphatic and aromatic alkenes. In contrast, the catalytic activity for alkene hydrosilylation of silylene complex ^L31 is comparable to phosphine complex ^L11, but a dependence of regioselectivity on the substrates was observed: While aliphatic alkenes are converted in an anti-Markovnikov fashion, the hydrosilylation of aromatic alkenes affords Markovnikov products. The substrate scope was explored with 28 examples. Additional experiments were conducted to elucidate these mechanisms of hydrosilylation. The synthesis of cobalt(I) complex (L¹)Co(PMe₃)₂ (^L17) and its catalytic properties for alkene hydrosilylation allowed for the proposal of the mechanistic variations that occur in dependence of reaction conditions and substrates.

Synthesis of aryl cobalt and iron complexes and their catalytic activity on hydrosilylation of alkenes

Four aryl Co and Fe complexes, (F4C5N)CoCl(PMe3)3 (1), (F4C5N)Fe(PMe3)4 (2), (F5C6)CoCl(PMe3)3 (3) and (F4C5)FeCl(PMe3)3 (4), were synthesized from the reactions of 3-chloro-2,4,5,6-tetrafluoro-pyridine and chloropentafluorobenzene with Co(PMe3)4 and Fe(PMe3)4, respectively.